diff options
Diffstat (limited to 'arch/x86/cpu/apollolake/fsp_m.c')
-rw-r--r-- | arch/x86/cpu/apollolake/fsp_m.c | 170 |
1 files changed, 7 insertions, 163 deletions
diff --git a/arch/x86/cpu/apollolake/fsp_m.c b/arch/x86/cpu/apollolake/fsp_m.c index 5308af8ed4..1301100cd5 100644 --- a/arch/x86/cpu/apollolake/fsp_m.c +++ b/arch/x86/cpu/apollolake/fsp_m.c @@ -6,185 +6,29 @@ #include <common.h> #include <dm.h> +#include <log.h> #include <asm/arch/iomap.h> -#include <asm/arch/fsp/fsp_configs.h> -#include <asm/arch/fsp/fsp_m_upd.h> +#include <asm/arch/fsp_bindings.h> #include <asm/fsp2/fsp_internal.h> #include <dm/uclass-internal.h> -/* - * ODT settings: - * If ODT PIN to LP4 DRAM is pulled HIGH for ODT_A and HIGH for ODT_B, - * choose ODT_A_B_HIGH_HIGH. If ODT PIN to LP4 DRAM is pulled HIGH for ODT_A - * and LOW for ODT_B, choose ODT_A_B_HIGH_LOW. - * - * Note that the enum values correspond to the interpreted UPD fields - * within Ch[3:0]_OdtConfig parameters. - */ -enum { - ODT_A_B_HIGH_LOW = 0 << 1, - ODT_A_B_HIGH_HIGH = 1 << 1, - N_WR_24 = 1 << 5, -}; - -/* - * LPDDR4 helper routines for configuring the memory UPD for LPDDR4 operation. - * There are four physical LPDDR4 channels, each 32-bits wide. There are two - * logical channels using two physical channels together to form a 64-bit - * interface to memory for each logical channel. - */ - -enum { - LP4_PHYS_CH0A, - LP4_PHYS_CH0B, - LP4_PHYS_CH1A, - LP4_PHYS_CH1B, - - LP4_NUM_PHYS_CHANNELS, -}; - -/* - * The DQs within a physical channel can be bit-swizzled within each byte. - * Within a channel the bytes can be swapped, but the DQs need to be routed - * with the corresponding DQS (strobe). - */ -enum { - LP4_DQS0, - LP4_DQS1, - LP4_DQS2, - LP4_DQS3, - - LP4_NUM_BYTE_LANES, - DQ_BITS_PER_DQS = 8, -}; - -/* Provide bit swizzling per DQS and byte swapping within a channel */ -struct lpddr4_chan_swizzle_cfg { - u8 dqs[LP4_NUM_BYTE_LANES][DQ_BITS_PER_DQS]; -}; - -struct lpddr4_swizzle_cfg { - struct lpddr4_chan_swizzle_cfg phys[LP4_NUM_PHYS_CHANNELS]; -}; - -static void setup_sdram(struct fsp_m_config *cfg, - const struct lpddr4_swizzle_cfg *swizzle_cfg) -{ - const struct lpddr4_chan_swizzle_cfg *sch; - /* Number of bytes to copy per DQS */ - const size_t sz = DQ_BITS_PER_DQS; - int chan; - - cfg->memory_down = 1; - cfg->scrambler_support = 1; - cfg->channel_hash_mask = 0x36; - cfg->slice_hash_mask = 9; - cfg->interleaved_mode = 2; - cfg->channels_slices_enable = 0; - cfg->min_ref_rate2x_enable = 0; - cfg->dual_rank_support_enable = 1; - - /* LPDDR4 is memory down so no SPD addresses */ - cfg->dimm0_spd_address = 0; - cfg->dimm1_spd_address = 0; - - for (chan = 0; chan < 4; chan++) { - struct fsp_ram_channel *ch = &cfg->chan[chan]; - - ch->rank_enable = 1; - ch->device_width = 1; - ch->dram_density = 2; - ch->option = 3; - ch->odt_config = ODT_A_B_HIGH_HIGH; - } - - /* - * CH0_DQB byte lanes in the bit swizzle configuration field are - * not 1:1. The mapping within the swizzling field is: - * indices [0:7] - byte lane 1 (DQS1) DQ[8:15] - * indices [8:15] - byte lane 0 (DQS0) DQ[0:7] - * indices [16:23] - byte lane 3 (DQS3) DQ[24:31] - * indices [24:31] - byte lane 2 (DQS2) DQ[16:23] - */ - sch = &swizzle_cfg->phys[LP4_PHYS_CH0B]; - memcpy(&cfg->ch_bit_swizzling[0][0], &sch->dqs[LP4_DQS1], sz); - memcpy(&cfg->ch_bit_swizzling[0][8], &sch->dqs[LP4_DQS0], sz); - memcpy(&cfg->ch_bit_swizzling[0][16], &sch->dqs[LP4_DQS3], sz); - memcpy(&cfg->ch_bit_swizzling[0][24], &sch->dqs[LP4_DQS2], sz); - - /* - * CH0_DQA byte lanes in the bit swizzle configuration field are 1:1. - */ - sch = &swizzle_cfg->phys[LP4_PHYS_CH0A]; - memcpy(&cfg->ch_bit_swizzling[1][0], &sch->dqs[LP4_DQS0], sz); - memcpy(&cfg->ch_bit_swizzling[1][8], &sch->dqs[LP4_DQS1], sz); - memcpy(&cfg->ch_bit_swizzling[1][16], &sch->dqs[LP4_DQS2], sz); - memcpy(&cfg->ch_bit_swizzling[1][24], &sch->dqs[LP4_DQS3], sz); - - sch = &swizzle_cfg->phys[LP4_PHYS_CH1B]; - memcpy(&cfg->ch_bit_swizzling[2][0], &sch->dqs[LP4_DQS1], sz); - memcpy(&cfg->ch_bit_swizzling[2][8], &sch->dqs[LP4_DQS0], sz); - memcpy(&cfg->ch_bit_swizzling[2][16], &sch->dqs[LP4_DQS3], sz); - memcpy(&cfg->ch_bit_swizzling[2][24], &sch->dqs[LP4_DQS2], sz); - - /* - * CH0_DQA byte lanes in the bit swizzle configuration field are 1:1. - */ - sch = &swizzle_cfg->phys[LP4_PHYS_CH1A]; - memcpy(&cfg->ch_bit_swizzling[3][0], &sch->dqs[LP4_DQS0], sz); - memcpy(&cfg->ch_bit_swizzling[3][8], &sch->dqs[LP4_DQS1], sz); - memcpy(&cfg->ch_bit_swizzling[3][16], &sch->dqs[LP4_DQS2], sz); - memcpy(&cfg->ch_bit_swizzling[3][24], &sch->dqs[LP4_DQS3], sz); -} - int fspm_update_config(struct udevice *dev, struct fspm_upd *upd) { struct fsp_m_config *cfg = &upd->config; struct fspm_arch_upd *arch = &upd->arch; + ofnode node; arch->nvs_buffer_ptr = NULL; prepare_mrc_cache(upd); arch->stack_base = (void *)0xfef96000; arch->boot_loader_tolum_size = 0; - arch->boot_mode = FSP_BOOT_WITH_FULL_CONFIGURATION; - cfg->serial_debug_port_type = 2; - cfg->serial_debug_port_device = 2; - cfg->serial_debug_port_stride_size = 2; - cfg->serial_debug_port_address = 0; - cfg->package = 1; - /* Don't enforce a memory size limit */ - cfg->memory_size_limit = 0; - cfg->low_memory_max_value = 2048; /* 2 GB */ - /* No restrictions on memory above 4GiB */ - cfg->high_memory_max_value = 0; + node = dev_ofnode(dev); + if (!ofnode_valid(node)) + return log_msg_ret("fsp-m settings", -ENOENT); - /* Always default to attempt to use saved training data */ - cfg->disable_fast_boot = 0; - - const u8 *swizzle_data; - - swizzle_data = dev_read_u8_array_ptr(dev, "lpddr4-swizzle", - LP4_NUM_BYTE_LANES * - DQ_BITS_PER_DQS * - LP4_NUM_PHYS_CHANNELS); - if (!swizzle_data) - return log_msg_ret("Cannot read swizzel data", -EINVAL); - - setup_sdram(cfg, (struct lpddr4_swizzle_cfg *)swizzle_data); - - cfg->pre_mem_gpio_table_ptr = 0; - - cfg->profile = 0xb; - cfg->msg_level_mask = 0; - - /* other */ - cfg->skip_cse_rbp = 1; - cfg->periodic_retraining_disable = 0; - cfg->enable_s3_heci2 = 0; - - return 0; + return fsp_m_update_config_from_dtb(node, cfg); } /* |