diff options
Diffstat (limited to 'arch/x86/cpu')
| -rw-r--r-- | arch/x86/cpu/quark/mrc.c | 204 |
1 files changed, 204 insertions, 0 deletions
diff --git a/arch/x86/cpu/quark/mrc.c b/arch/x86/cpu/quark/mrc.c new file mode 100644 index 0000000000..7eb34c5302 --- /dev/null +++ b/arch/x86/cpu/quark/mrc.c @@ -0,0 +1,204 @@ +/* + * Copyright (C) 2013, Intel Corporation + * Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com> + * + * Ported from Intel released Quark UEFI BIOS + * QuarkSocPkg/QuarkNorthCluster/MemoryInit/Pei + * + * SPDX-License-Identifier: Intel + */ + +/* + * This is the main Quark Memory Reference Code (MRC) + * + * These functions are generic and should work for any Quark-based board. + * + * MRC requires two data structures to be passed in which are initialized by + * mrc_adjust_params(). + * + * The basic flow is as follows: + * 01) Check for supported DDR speed configuration + * 02) Set up Memory Manager buffer as pass-through (POR) + * 03) Set Channel Interleaving Mode and Channel Stride to the most aggressive + * setting possible + * 04) Set up the Memory Controller logic + * 05) Set up the DDR_PHY logic + * 06) Initialise the DRAMs (JEDEC) + * 07) Perform the Receive Enable Calibration algorithm + * 08) Perform the Write Leveling algorithm + * 09) Perform the Read Training algorithm (includes internal Vref) + * 10) Perform the Write Training algorithm + * 11) Set Channel Interleaving Mode and Channel Stride to the desired settings + * + * DRAM unit configuration based on Valleyview MRC. + */ + +#include <common.h> +#include <asm/arch/mrc.h> +#include <asm/arch/msg_port.h> +#include "mrc_util.h" +#include "smc.h" + +static const struct mem_init init[] = { + { 0x0101, BM_COLD | BM_FAST | BM_WARM | BM_S3, clear_self_refresh }, + { 0x0200, BM_COLD | BM_FAST | BM_WARM | BM_S3, prog_ddr_timing_control }, + { 0x0103, BM_COLD | BM_FAST , prog_decode_before_jedec }, + { 0x0104, BM_COLD | BM_FAST , perform_ddr_reset }, + { 0x0300, BM_COLD | BM_FAST | BM_S3, ddrphy_init }, + { 0x0400, BM_COLD | BM_FAST , perform_jedec_init }, + { 0x0105, BM_COLD | BM_FAST , set_ddr_init_complete }, + { 0x0106, BM_FAST | BM_WARM | BM_S3, restore_timings }, + { 0x0106, BM_COLD , default_timings }, + { 0x0500, BM_COLD , rcvn_cal }, + { 0x0600, BM_COLD , wr_level }, + { 0x0120, BM_COLD , prog_page_ctrl }, + { 0x0700, BM_COLD , rd_train }, + { 0x0800, BM_COLD , wr_train }, + { 0x010b, BM_COLD , store_timings }, + { 0x010c, BM_COLD | BM_FAST | BM_WARM | BM_S3, enable_scrambling }, + { 0x010d, BM_COLD | BM_FAST | BM_WARM | BM_S3, prog_ddr_control }, + { 0x010e, BM_COLD | BM_FAST | BM_WARM | BM_S3, prog_dra_drb }, + { 0x010f, BM_WARM | BM_S3, perform_wake }, + { 0x0110, BM_COLD | BM_FAST | BM_WARM | BM_S3, change_refresh_period }, + { 0x0111, BM_COLD | BM_FAST | BM_WARM | BM_S3, set_auto_refresh }, + { 0x0112, BM_COLD | BM_FAST | BM_WARM | BM_S3, ecc_enable }, + { 0x0113, BM_COLD | BM_FAST , memory_test }, + { 0x0114, BM_COLD | BM_FAST | BM_WARM | BM_S3, lock_registers } +}; + +/* Adjust configuration parameters before initialization sequence */ +static void mrc_adjust_params(struct mrc_params *mrc_params) +{ + const struct dram_params *dram_params; + uint8_t dram_width; + uint32_t rank_enables; + uint32_t channel_width; + + ENTERFN(); + + /* initially expect success */ + mrc_params->status = MRC_SUCCESS; + + dram_width = mrc_params->dram_width; + rank_enables = mrc_params->rank_enables; + channel_width = mrc_params->channel_width; + + /* + * Setup board layout (must be reviewed as is selecting static timings) + * 0 == R0 (DDR3 x16), 1 == R1 (DDR3 x16), + * 2 == DV (DDR3 x8), 3 == SV (DDR3 x8). + */ + if (dram_width == X8) + mrc_params->board_id = 2; /* select x8 layout */ + else + mrc_params->board_id = 0; /* select x16 layout */ + + /* initially no memory */ + mrc_params->mem_size = 0; + + /* begin of channel settings */ + dram_params = &mrc_params->params; + + /* + * Determine column bits: + * + * Column: 11 for 8Gbx8, else 10 + */ + mrc_params->column_bits[0] = + ((dram_params[0].density == 4) && + (dram_width == X8)) ? (11) : (10); + + /* + * Determine row bits: + * + * 512Mbx16=12 512Mbx8=13 + * 1Gbx16=13 1Gbx8=14 + * 2Gbx16=14 2Gbx8=15 + * 4Gbx16=15 4Gbx8=16 + * 8Gbx16=16 8Gbx8=16 + */ + mrc_params->row_bits[0] = 12 + (dram_params[0].density) + + (((dram_params[0].density < 4) && + (dram_width == X8)) ? (1) : (0)); + + /* + * Determine per-channel memory size: + * + * (For 2 RANKs, multiply by 2) + * (For 16 bit data bus, divide by 2) + * + * DENSITY WIDTH MEM_AVAILABLE + * 512Mb x16 0x008000000 ( 128MB) + * 512Mb x8 0x010000000 ( 256MB) + * 1Gb x16 0x010000000 ( 256MB) + * 1Gb x8 0x020000000 ( 512MB) + * 2Gb x16 0x020000000 ( 512MB) + * 2Gb x8 0x040000000 (1024MB) + * 4Gb x16 0x040000000 (1024MB) + * 4Gb x8 0x080000000 (2048MB) + */ + mrc_params->channel_size[0] = (1 << dram_params[0].density); + mrc_params->channel_size[0] *= (dram_width == X8) ? 2 : 1; + mrc_params->channel_size[0] *= (rank_enables == 0x3) ? 2 : 1; + mrc_params->channel_size[0] *= (channel_width == X16) ? 1 : 2; + + /* Determine memory size (convert number of 64MB/512Mb units) */ + mrc_params->mem_size += mrc_params->channel_size[0] << 26; + + LEAVEFN(); +} + +static void mrc_mem_init(struct mrc_params *mrc_params) +{ + int i; + + ENTERFN(); + + /* MRC started */ + mrc_post_code(0x01, 0x00); + + if (mrc_params->boot_mode != BM_COLD) { + if (mrc_params->ddr_speed != mrc_params->timings.ddr_speed) { + /* full training required as frequency changed */ + mrc_params->boot_mode = BM_COLD; + } + } + + for (i = 0; i < ARRAY_SIZE(init); i++) { + uint64_t my_tsc; + + if (mrc_params->boot_mode & init[i].boot_path) { + uint8_t major = init[i].post_code >> 8 & 0xff; + uint8_t minor = init[i].post_code >> 0 & 0xff; + mrc_post_code(major, minor); + + my_tsc = rdtsc(); + init[i].init_fn(mrc_params); + DPF(D_TIME, "Execution time %llx", rdtsc() - my_tsc); + } + } + + /* display the timings */ + print_timings(mrc_params); + + /* MRC complete */ + mrc_post_code(0x01, 0xff); + + LEAVEFN(); +} + +void mrc_init(struct mrc_params *mrc_params) +{ + ENTERFN(); + + DPF(D_INFO, "MRC Version %04x %s %s\n", MRC_VERSION, + __DATE__, __TIME__); + + /* Set up the data structures used by mrc_mem_init() */ + mrc_adjust_params(mrc_params); + + /* Initialize system memory */ + mrc_mem_init(mrc_params); + + LEAVEFN(); +} |