diff options
Diffstat (limited to 'arch')
115 files changed, 3681 insertions, 1602 deletions
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index a80ce9c791..2a89da2ce9 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -279,6 +279,7 @@ dtb-$(CONFIG_ARCH_ZYNQMP) += \ zynqmp-zcu102-revA.dtb \ zynqmp-zcu102-revB.dtb \ zynqmp-zcu102-rev1.0.dtb \ + zynqmp-zcu102-rev1.1.dtb \ zynqmp-zcu104-revA.dtb \ zynqmp-zcu104-revC.dtb \ zynqmp-zcu106-revA.dtb \ diff --git a/arch/arm/dts/am335x-brppt1-mmc.dts b/arch/arm/dts/am335x-brppt1-mmc.dts index 9be34d9da0..6f919711f0 100644 --- a/arch/arm/dts/am335x-brppt1-mmc.dts +++ b/arch/arm/dts/am335x-brppt1-mmc.dts @@ -53,6 +53,8 @@ bkl-pwm = <&pwmbacklight>; bkl-tps = <&tps_bl>; + u-boot,dm-pre-reloc; + panel-info { ac-bias = <255>; ac-bias-intrpt = <0>; diff --git a/arch/arm/dts/am335x-brppt1-nand.dts b/arch/arm/dts/am335x-brppt1-nand.dts index 11bd5c551c..9d4340f591 100644 --- a/arch/arm/dts/am335x-brppt1-nand.dts +++ b/arch/arm/dts/am335x-brppt1-nand.dts @@ -53,6 +53,8 @@ bkl-pwm = <&pwmbacklight>; bkl-tps = <&tps_bl>; + u-boot,dm-pre-reloc; + panel-info { ac-bias = <255>; ac-bias-intrpt = <0>; diff --git a/arch/arm/dts/am335x-brppt1-spi.dts b/arch/arm/dts/am335x-brppt1-spi.dts index 01ab74be5e..c078af8fba 100644 --- a/arch/arm/dts/am335x-brppt1-spi.dts +++ b/arch/arm/dts/am335x-brppt1-spi.dts @@ -54,6 +54,8 @@ bkl-pwm = <&pwmbacklight>; bkl-tps = <&tps_bl>; + u-boot,dm-pre-reloc; + panel-info { ac-bias = <255>; ac-bias-intrpt = <0>; diff --git a/arch/arm/dts/am335x-brsmarc1.dts b/arch/arm/dts/am335x-brsmarc1.dts index a63fc2da22..7e9516e8f8 100644 --- a/arch/arm/dts/am335x-brsmarc1.dts +++ b/arch/arm/dts/am335x-brsmarc1.dts @@ -59,6 +59,7 @@ /*backlight = <&tps_bl>; */ compatible = "ti,tilcdc,panel"; status = "okay"; + u-boot,dm-pre-reloc; panel-info { ac-bias = <255>; diff --git a/arch/arm/dts/am335x-brxre1.dts b/arch/arm/dts/am335x-brxre1.dts index 33d8ab78d8..6091a12fb7 100644 --- a/arch/arm/dts/am335x-brxre1.dts +++ b/arch/arm/dts/am335x-brxre1.dts @@ -79,6 +79,8 @@ backlight = <&tps_bl>; + u-boot,dm-pre-reloc; + panel-info { ac-bias = <255>; ac-bias-intrpt = <0>; diff --git a/arch/arm/dts/am335x-evm-u-boot.dtsi b/arch/arm/dts/am335x-evm-u-boot.dtsi index b6b97ed16d..d7b049ef20 100644 --- a/arch/arm/dts/am335x-evm-u-boot.dtsi +++ b/arch/arm/dts/am335x-evm-u-boot.dtsi @@ -3,6 +3,12 @@ * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/ */ +/ { + panel { + u-boot,dm-pre-reloc; + }; +}; + &mmc3 { status = "disabled"; diff --git a/arch/arm/dts/am335x-evmsk-u-boot.dtsi b/arch/arm/dts/am335x-evmsk-u-boot.dtsi new file mode 100644 index 0000000000..599fb377e6 --- /dev/null +++ b/arch/arm/dts/am335x-evmsk-u-boot.dtsi @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * am335x-evmsk U-Boot Additions + * + * Copyright (C) 2020 Dario Binacchi <dariobin@libero.it> + */ + +/ { + panel { + u-boot,dm-pre-reloc; + }; +}; diff --git a/arch/arm/dts/am335x-guardian-u-boot.dtsi b/arch/arm/dts/am335x-guardian-u-boot.dtsi index 156b9b0e83..705ef335bf 100644 --- a/arch/arm/dts/am335x-guardian-u-boot.dtsi +++ b/arch/arm/dts/am335x-guardian-u-boot.dtsi @@ -8,6 +8,10 @@ ocp { u-boot,dm-pre-reloc; }; + + panel { + u-boot,dm-pre-reloc; + }; }; &l4_wkup { diff --git a/arch/arm/dts/am335x-pdu001-u-boot.dtsi b/arch/arm/dts/am335x-pdu001-u-boot.dtsi index 84a07bdef4..a799fe9bc3 100644 --- a/arch/arm/dts/am335x-pdu001-u-boot.dtsi +++ b/arch/arm/dts/am335x-pdu001-u-boot.dtsi @@ -7,6 +7,10 @@ ocp { u-boot,dm-pre-reloc; }; + + panel { + u-boot,dm-pre-reloc; + }; }; &l4_wkup { diff --git a/arch/arm/dts/am335x-pxm50-u-boot.dtsi b/arch/arm/dts/am335x-pxm50-u-boot.dtsi new file mode 100644 index 0000000000..77dfe6e262 --- /dev/null +++ b/arch/arm/dts/am335x-pxm50-u-boot.dtsi @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * am335x-pxm50 U-Boot Additions + * + * Copyright (C) 2020 Dario Binacchi <dariobin@libero.it> + */ + +/ { + panel { + u-boot,dm-pre-reloc; + }; +}; diff --git a/arch/arm/dts/am335x-rut-u-boot.dtsi b/arch/arm/dts/am335x-rut-u-boot.dtsi new file mode 100644 index 0000000000..b2b4aa596a --- /dev/null +++ b/arch/arm/dts/am335x-rut-u-boot.dtsi @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * am335x-rut U-Boot Additions + * + * Copyright (C) 2020 Dario Binacchi <dariobin@libero.it> + */ + +/ { + panel { + u-boot,dm-pre-reloc; + }; +}; diff --git a/arch/arm/dts/avnet-ultra96-rev1.dts b/arch/arm/dts/avnet-ultra96-rev1.dts index 88aa06fa78..ddb8febaec 100644 --- a/arch/arm/dts/avnet-ultra96-rev1.dts +++ b/arch/arm/dts/avnet-ultra96-rev1.dts @@ -2,7 +2,7 @@ /* * dts file for Avnet Ultra96 rev1 * - * (C) Copyright 2018, Xilinx, Inc. + * (C) Copyright 2018 - 2020, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> */ diff --git a/arch/arm/dts/da850-evm-u-boot.dtsi b/arch/arm/dts/da850-evm-u-boot.dtsi index aa42d30c72..d9afc5edf4 100644 --- a/arch/arm/dts/da850-evm-u-boot.dtsi +++ b/arch/arm/dts/da850-evm-u-boot.dtsi @@ -14,6 +14,10 @@ nand { compatible = "ti,davinci-nand"; }; + + panel { + u-boot,dm-pre-reloc; + }; }; ð0 { diff --git a/arch/arm/dts/k3-am65-mcu.dtsi b/arch/arm/dts/k3-am65-mcu.dtsi index c42e7553c7..bc9a87210d 100644 --- a/arch/arm/dts/k3-am65-mcu.dtsi +++ b/arch/arm/dts/k3-am65-mcu.dtsi @@ -64,4 +64,42 @@ loczrama = <1>; }; }; + + fss: fss@47000000 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ospi0: spi@47040000 { + compatible = "ti,am654-ospi", "cdns,qspi-nor"; + reg = <0x0 0x47040000 0x0 0x100>, + <0x5 0x00000000 0x1 0x0000000>; + interrupts = <GIC_SPI 552 IRQ_TYPE_LEVEL_HIGH>; + cdns,fifo-depth = <256>; + cdns,fifo-width = <4>; + cdns,trigger-address = <0x0>; + clocks = <&k3_clks 248 0>; + assigned-clocks = <&k3_clks 248 0>; + assigned-clock-parents = <&k3_clks 248 2>; + assigned-clock-rates = <166666666>; + power-domains = <&k3_pds 248 TI_SCI_PD_EXCLUSIVE>; + #address-cells = <1>; + #size-cells = <0>; + }; + + ospi1: spi@47050000 { + compatible = "ti,am654-ospi", "cdns,qspi-nor"; + reg = <0x0 0x47050000 0x0 0x100>, + <0x7 0x00000000 0x1 0x00000000>; + interrupts = <GIC_SPI 553 IRQ_TYPE_LEVEL_HIGH>; + cdns,fifo-depth = <256>; + cdns,fifo-width = <4>; + cdns,trigger-address = <0x0>; + clocks = <&k3_clks 249 6>; + power-domains = <&k3_pds 249 TI_SCI_PD_EXCLUSIVE>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; }; diff --git a/arch/arm/dts/k3-am65.dtsi b/arch/arm/dts/k3-am65.dtsi index 3ead944640..3d89bf32a9 100644 --- a/arch/arm/dts/k3-am65.dtsi +++ b/arch/arm/dts/k3-am65.dtsi @@ -30,6 +30,8 @@ i2c3 = &main_i2c1; i2c4 = &main_i2c2; i2c5 = &main_i2c3; + spi0 = &ospi0; + spi1 = &ospi1; }; chosen { }; @@ -79,7 +81,11 @@ <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, - <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>; + <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, + <0x00 0x50000000 0x00 0x50000000 0x00 0x8000000>, + <0x00 0x70000000 0x00 0x70000000 0x00 0x200000>, + <0x05 0x00000000 0x05 0x00000000 0x01 0x0000000>, + <0x07 0x00000000 0x07 0x00000000 0x01 0x0000000>; cbass_mcu: interconnect@28380000 { compatible = "simple-bus"; @@ -93,7 +99,10 @@ <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, /* WKUP */ <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, /* MMRs, remaining NAVSS */ <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, /* CPSW */ - <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>; /* OSPI space 1 */ + <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, /* OSPI space 1 */ + <0x00 0x50000000 0x00 0x50000000 0x00 0x8000000>, /* FSS OSPI0 data region 1 */ + <0x05 0x00000000 0x05 0x00000000 0x01 0x0000000>, /* FSS OSPI0 data region 3*/ + <0x07 0x00000000 0x07 0x00000000 0x01 0x0000000>; /* FSS OSPI1 data region 3*/ cbass_wakeup: interconnect@42040000 { compatible = "simple-bus"; diff --git a/arch/arm/dts/k3-am654-base-board-u-boot.dtsi b/arch/arm/dts/k3-am654-base-board-u-boot.dtsi index 54ecb3d444..a7e5eb0553 100644 --- a/arch/arm/dts/k3-am654-base-board-u-boot.dtsi +++ b/arch/arm/dts/k3-am654-base-board-u-boot.dtsi @@ -52,6 +52,7 @@ #address-cells = <2>; #size-cells = <2>; ranges; + u-boot,dm-spl; ti,sci-dev-id = <119>; @@ -68,6 +69,7 @@ ti,dma-ring-reset-quirk; ti,sci = <&dmsc>; ti,sci-dev-id = <195>; + u-boot,dm-spl; }; mcu_udmap: udmap@285c0000 { @@ -90,6 +92,7 @@ <0x4>; /* RX_CHAN */ ti,sci-rm-range-rflow = <0x5>; /* GP RFLOW */ dma-coherent; + u-boot,dm-spl; }; }; @@ -314,6 +317,10 @@ AM65X_WKUP_IOPAD(0x0088, PIN_INPUT, 0) /* (L4) MCU_MDIO0_MDIO */ >; }; + + mcu-fss0-ospi0-pins-default { + u-boot,dm-spl; + }; }; &main_uart0 { @@ -374,3 +381,15 @@ &usb1 { dr_mode = "peripheral"; }; + +&fss { + u-boot,dm-spl; +}; + +&ospi0 { + u-boot,dm-spl; + + flash@0{ + u-boot,dm-spl; + }; +}; diff --git a/arch/arm/dts/k3-am654-base-board.dts b/arch/arm/dts/k3-am654-base-board.dts index 7ebbf17862..5058b6c88e 100644 --- a/arch/arm/dts/k3-am654-base-board.dts +++ b/arch/arm/dts/k3-am654-base-board.dts @@ -64,6 +64,29 @@ AM65X_IOPAD(0x02c0, PIN_OUTPUT, 0) /* (AC8) USB1_DRVVBUS */ >; }; + + main_i2c2_pins_default: main-i2c2-pins-default { + pinctrl-single,pins = < + AM65X_IOPAD(0x0074, PIN_INPUT, 5) /* (T27) GPMC0_CSn3.I2C2_SCL */ + AM65X_IOPAD(0x0070, PIN_INPUT, 5) /* (R25) GPMC0_CSn2.I2C2_SDA */ + >; + }; +}; + +&main_pmx1 { + main_i2c0_pins_default: main-i2c0-pins-default { + pinctrl-single,pins = < + AM65X_IOPAD(0x0000, PIN_INPUT, 0) /* (D20) I2C0_SCL */ + AM65X_IOPAD(0x0004, PIN_INPUT, 0) /* (C21) I2C0_SDA */ + >; + }; + + main_i2c1_pins_default: main-i2c1-pins-default { + pinctrl-single,pins = < + AM65X_IOPAD(0x0008, PIN_INPUT, 0) /* (B21) I2C1_SCL */ + AM65X_IOPAD(0x000c, PIN_INPUT, 0) /* (E21) I2C1_SDA */ + >; + }; }; &wkup_pmx0 { @@ -73,6 +96,22 @@ AM65X_WKUP_IOPAD(0x00e4, PIN_INPUT, 0) /* (AD6) WKUP_I2C0_SDA */ >; }; + + mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-pins_default { + pinctrl-single,pins = < + AM65X_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) /* (V1) MCU_OSPI0_CLK */ + AM65X_WKUP_IOPAD(0x0008, PIN_INPUT, 0) /* (U2) MCU_OSPI0_DQS */ + AM65X_WKUP_IOPAD(0x000c, PIN_INPUT, 0) /* (U4) MCU_OSPI0_D0 */ + AM65X_WKUP_IOPAD(0x0010, PIN_INPUT, 0) /* (U5) MCU_OSPI0_D1 */ + AM65X_WKUP_IOPAD(0x0014, PIN_INPUT, 0) /* (T2) MCU_OSPI0_D2 */ + AM65X_WKUP_IOPAD(0x0018, PIN_INPUT, 0) /* (T3) MCU_OSPI0_D3 */ + AM65X_WKUP_IOPAD(0x001c, PIN_INPUT, 0) /* (T4) MCU_OSPI0_D4 */ + AM65X_WKUP_IOPAD(0x0020, PIN_INPUT, 0) /* (T5) MCU_OSPI0_D5 */ + AM65X_WKUP_IOPAD(0x0024, PIN_INPUT, 0) /* (R2) MCU_OSPI0_D6 */ + AM65X_WKUP_IOPAD(0x0028, PIN_INPUT, 0) /* (R3) MCU_OSPI0_D7 */ + AM65X_WKUP_IOPAD(0x002c, PIN_OUTPUT, 0) /* (R4) MCU_OSPI0_CSn0 */ + >; + }; }; &sdhci0 { @@ -96,6 +135,31 @@ }; }; +&main_i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c0_pins_default>; + clock-frequency = <400000>; + + pca9555: gpio@21 { + compatible = "nxp,pca9555"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + +&main_i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c1_pins_default>; + clock-frequency = <400000>; +}; + +&main_i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c2_pins_default>; + clock-frequency = <400000>; +}; + &dwc3_1 { status = "okay"; }; @@ -117,3 +181,23 @@ &usb0_phy { status = "disabled"; }; + +&ospi0 { + pinctrl-names = "default"; + pinctrl-0 = <&mcu_fss0_ospi0_pins_default>; + + flash@0{ + compatible = "jedec,spi-nor"; + reg = <0x0>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <8>; + spi-max-frequency = <40000000>; + cdns,tshsl-ns = <60>; + cdns,tsd2d-ns = <60>; + cdns,tchsh-ns = <60>; + cdns,tslch-ns = <60>; + cdns,read-delay = <0>; + #address-cells = <1>; + #size-cells = <1>; + }; +}; diff --git a/arch/arm/dts/k3-am654-r5-base-board.dts b/arch/arm/dts/k3-am654-r5-base-board.dts index 5d5689d284..257b56a1b0 100644 --- a/arch/arm/dts/k3-am654-r5-base-board.dts +++ b/arch/arm/dts/k3-am654-r5-base-board.dts @@ -179,6 +179,22 @@ AM65X_WKUP_IOPAD(0x00e4, PIN_INPUT, 0) /* (AD6) WKUP_I2C0_SDA */ >; }; + + mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-pins_default { + pinctrl-single,pins = < + AM65X_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) /* (V1) MCU_OSPI0_CLK */ + AM65X_WKUP_IOPAD(0x0008, PIN_INPUT, 0) /* (U2) MCU_OSPI0_DQS */ + AM65X_WKUP_IOPAD(0x000c, PIN_INPUT, 0) /* (U4) MCU_OSPI0_D0 */ + AM65X_WKUP_IOPAD(0x0010, PIN_INPUT, 0) /* (U5) MCU_OSPI0_D1 */ + AM65X_WKUP_IOPAD(0x0014, PIN_INPUT, 0) /* (T2) MCU_OSPI0_D2 */ + AM65X_WKUP_IOPAD(0x0018, PIN_INPUT, 0) /* (T3) MCU_OSPI0_D3 */ + AM65X_WKUP_IOPAD(0x001c, PIN_INPUT, 0) /* (T4) MCU_OSPI0_D4 */ + AM65X_WKUP_IOPAD(0x0020, PIN_INPUT, 0) /* (T5) MCU_OSPI0_D5 */ + AM65X_WKUP_IOPAD(0x0024, PIN_INPUT, 0) /* (R2) MCU_OSPI0_D6 */ + AM65X_WKUP_IOPAD(0x0028, PIN_INPUT, 0) /* (R3) MCU_OSPI0_D7 */ + AM65X_WKUP_IOPAD(0x002c, PIN_OUTPUT, 0) /* (R4) MCU_OSPI0_CSn0 */ + >; + }; }; &main_pmx0 { @@ -239,3 +255,26 @@ u-boot,dm-spl; }; }; + +&ospi0 { + pinctrl-names = "default"; + pinctrl-0 = <&mcu_fss0_ospi0_pins_default>; + + reg = <0x0 0x47040000 0x0 0x100>, + <0x0 0x50000000 0x0 0x8000000>; + + flash@0{ + compatible = "jedec,spi-nor"; + reg = <0x0>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <8>; + spi-max-frequency = <40000000>; + cdns,tshsl-ns = <60>; + cdns,tsd2d-ns = <60>; + cdns,tchsh-ns = <60>; + cdns,tslch-ns = <60>; + cdns,read-delay = <0>; + #address-cells = <1>; + #size-cells = <1>; + }; +}; diff --git a/arch/arm/dts/k3-j721e-common-proc-board-u-boot.dtsi b/arch/arm/dts/k3-j721e-common-proc-board-u-boot.dtsi index a3a8193216..7b01e4204f 100644 --- a/arch/arm/dts/k3-j721e-common-proc-board-u-boot.dtsi +++ b/arch/arm/dts/k3-j721e-common-proc-board-u-boot.dtsi @@ -349,3 +349,31 @@ &exp2 { u-boot,dm-spl; }; + +&mcu_fss0_ospi0_pins_default { + u-boot,dm-spl; +}; + +&fss { + u-boot,dm-spl; +}; + +&ospi0 { + u-boot,dm-spl; + + flash@0 { + u-boot,dm-spl; + }; +}; + +&ospi1 { + u-boot,dm-spl; + + flash@0 { + u-boot,dm-spl; + }; +}; + +&mcu_fss0_ospi1_pins_default { + u-boot,dm-spl; +}; diff --git a/arch/arm/dts/k3-j721e-common-proc-board.dts b/arch/arm/dts/k3-j721e-common-proc-board.dts index d216b707fd..496a15e1d1 100644 --- a/arch/arm/dts/k3-j721e-common-proc-board.dts +++ b/arch/arm/dts/k3-j721e-common-proc-board.dts @@ -123,6 +123,19 @@ J721E_WKUP_IOPAD(0xfc, PIN_INPUT_PULLUP, 0) /* (H24) WKUP_I2C0_SDA */ >; }; + + mcu_fss0_ospi1_pins_default: mcu-fss0-ospi1-pins-default { + pinctrl-single,pins = < + J721E_WKUP_IOPAD(0x34, PIN_OUTPUT, 0) /* (F22) MCU_OSPI1_CLK */ + J721E_WKUP_IOPAD(0x50, PIN_OUTPUT, 0) /* (C22) MCU_OSPI1_CSn0 */ + J721E_WKUP_IOPAD(0x40, PIN_INPUT, 0) /* (D22) MCU_OSPI1_D0 */ + J721E_WKUP_IOPAD(0x44, PIN_INPUT, 0) /* (G22) MCU_OSPI1_D1 */ + J721E_WKUP_IOPAD(0x48, PIN_INPUT, 0) /* (D23) MCU_OSPI1_D2 */ + J721E_WKUP_IOPAD(0x4c, PIN_INPUT, 0) /* (C23) MCU_OSPI1_D3 */ + J721E_WKUP_IOPAD(0x3c, PIN_INPUT, 0) /* (B23) MCU_OSPI1_DQS */ + J721E_WKUP_IOPAD(0x38, PIN_INPUT, 0) /* (A23) MCU_OSPI1_LBCLKO */ + >; + }; }; &usbss0 { @@ -172,3 +185,23 @@ #gpio-cells = <2>; }; }; + +&ospi1 { + pinctrl-names = "default"; + pinctrl-0 = <&mcu_fss0_ospi1_pins_default>; + + flash@0{ + compatible = "jedec,spi-nor"; + reg = <0x0>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; + spi-max-frequency = <40000000>; + cdns,tshsl-ns = <60>; + cdns,tsd2d-ns = <60>; + cdns,tchsh-ns = <60>; + cdns,tslch-ns = <60>; + cdns,read-delay = <2>; + #address-cells = <1>; + #size-cells = <1>; + }; +}; diff --git a/arch/arm/dts/k3-j721e-mcu-wakeup.dtsi b/arch/arm/dts/k3-j721e-mcu-wakeup.dtsi index fe52fd1b2f..2eed50aa5a 100644 --- a/arch/arm/dts/k3-j721e-mcu-wakeup.dtsi +++ b/arch/arm/dts/k3-j721e-mcu-wakeup.dtsi @@ -143,6 +143,39 @@ assigned-clocks = <&k3_clks 102 0>; assigned-clock-rates = <250000000>; }; + + ospi0: spi@47040000 { + compatible = "ti,am654-ospi"; + reg = <0x0 0x47040000 0x0 0x100>, + <0x5 0x00000000 0x1 0x0000000>; + interrupts = <GIC_SPI 840 IRQ_TYPE_LEVEL_HIGH>; + cdns,fifo-depth = <256>; + cdns,fifo-width = <4>; + cdns,trigger-address = <0x0>; + clocks = <&k3_clks 103 0>; + assigned-clocks = <&k3_clks 103 0>; + assigned-clock-parents = <&k3_clks 103 2>; + assigned-clock-rates = <166666666>; + power-domains = <&k3_pds 103 TI_SCI_PD_EXCLUSIVE>; + #address-cells = <1>; + #size-cells = <0>; + }; + + ospi1: spi@47050000 { + compatible = "ti,am654-ospi"; + reg = <0x0 0x47050000 0x0 0x100>, + <0x7 0x00000000 0x1 0x00000000>; + interrupts = <GIC_SPI 841 IRQ_TYPE_LEVEL_HIGH>; + cdns,fifo-depth = <256>; + cdns,fifo-width = <4>; + cdns,trigger-address = <0x0>; + clocks = <&k3_clks 104 0>; + assigned-clocks = <&k3_clks 104 0>; + assigned-clock-rates = <133333333>; + power-domains = <&k3_pds 104 TI_SCI_PD_EXCLUSIVE>; + #address-cells = <1>; + #size-cells = <0>; + }; }; mcu_i2c0: i2c@40b00000 { diff --git a/arch/arm/dts/k3-j721e-r5-common-proc-board-u-boot.dtsi b/arch/arm/dts/k3-j721e-r5-common-proc-board-u-boot.dtsi new file mode 100644 index 0000000000..824b301afa --- /dev/null +++ b/arch/arm/dts/k3-j721e-r5-common-proc-board-u-boot.dtsi @@ -0,0 +1,34 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/ + */ + +/ { + chosen { + firmware-loader = &fs_loader0; + }; + + fs_loader0: fs_loader@0 { + u-boot,dm-pre-reloc; + compatible = "u-boot,fs-loader"; + }; +}; + +&main_r5fss0 { + u-boot,dm-spl; +}; + +&main_r5fss0_core0 { + u-boot,dm-spl; +}; + +&main_r5fss0_core1 { + u-boot,dm-spl; +}; + +&tps659413a { + esm: esm { + compatible = "ti,tps659413-esm"; + u-boot,dm-spl; + }; +}; diff --git a/arch/arm/dts/k3-j721e-r5-common-proc-board.dts b/arch/arm/dts/k3-j721e-r5-common-proc-board.dts index 5973e211c3..403b158f49 100644 --- a/arch/arm/dts/k3-j721e-r5-common-proc-board.dts +++ b/arch/arm/dts/k3-j721e-r5-common-proc-board.dts @@ -13,6 +13,8 @@ aliases { remoteproc0 = &sysctrler; remoteproc1 = &a72_0; + remoteproc2 = &main_r5fss0_core0; + remoteproc3 = &main_r5fss0_core1; }; chosen { @@ -75,6 +77,15 @@ }; }; +&cbass_main { + main_esm: esm@700000 { + compatible = "ti,j721e-esm"; + reg = <0x0 0x700000 0x0 0x1000>; + ti,esm-pins = <344>, <345>; + u-boot,dm-spl; + }; +}; + &dmsc { mboxes= <&mcu_secproxy 8>, <&mcu_secproxy 6>, <&mcu_secproxy 5>; mbox-names = "tx", "rx", "notify"; @@ -107,6 +118,36 @@ J721E_WKUP_IOPAD(0xfc, PIN_INPUT_PULLUP, 0) /* (H24) WKUP_I2C0_SDA */ >; }; + + mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-pins-default { + pinctrl-single,pins = < + J721E_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) /* MCU_OSPI0_CLK */ + J721E_WKUP_IOPAD(0x0008, PIN_INPUT, 0) /* MCU_OSPI0_DQS */ + J721E_WKUP_IOPAD(0x000c, PIN_INPUT, 0) /* MCU_OSPI0_D0 */ + J721E_WKUP_IOPAD(0x0010, PIN_INPUT, 0) /* MCU_OSPI0_D1 */ + J721E_WKUP_IOPAD(0x0014, PIN_INPUT, 0) /* MCU_OSPI0_D2 */ + J721E_WKUP_IOPAD(0x0018, PIN_INPUT, 0) /* MCU_OSPI0_D3 */ + J721E_WKUP_IOPAD(0x001c, PIN_INPUT, 0) /* MCU_OSPI0_D4 */ + J721E_WKUP_IOPAD(0x0020, PIN_INPUT, 0) /* MCU_OSPI0_D5 */ + J721E_WKUP_IOPAD(0x0024, PIN_INPUT, 0) /* MCU_OSPI0_D6 */ + J721E_WKUP_IOPAD(0x0028, PIN_INPUT, 0) /* MCU_OSPI0_D7 */ + J721E_WKUP_IOPAD(0x002c, PIN_OUTPUT, 0) /* MCU_OSPI0_CSn0 */ + >; + }; + + mcu_fss0_ospi1_pins_default: mcu-fss0-ospi1-pins-default { + u-boot,dm-spl; + pinctrl-single,pins = < + J721E_WKUP_IOPAD(0x34, PIN_OUTPUT, 0) /* (F22) MCU_OSPI1_CLK */ + J721E_WKUP_IOPAD(0x50, PIN_OUTPUT, 0) /* (C22) MCU_OSPI1_CSn0 */ + J721E_WKUP_IOPAD(0x40, PIN_INPUT, 0) /* (D22) MCU_OSPI1_D0 */ + J721E_WKUP_IOPAD(0x44, PIN_INPUT, 0) /* (G22) MCU_OSPI1_D1 */ + J721E_WKUP_IOPAD(0x48, PIN_INPUT, 0) /* (D23) MCU_OSPI1_D2 */ + J721E_WKUP_IOPAD(0x4c, PIN_INPUT, 0) /* (C23) MCU_OSPI1_D3 */ + J721E_WKUP_IOPAD(0x3c, PIN_INPUT, 0) /* (B23) MCU_OSPI1_DQS */ + J721E_WKUP_IOPAD(0x38, PIN_INPUT, 0) /* (A23) MCU_OSPI1_LBCLKO */ + >; + }; }; &main_pmx0 { @@ -256,4 +297,52 @@ }; }; +&ospi0 { + pinctrl-names = "default"; + pinctrl-0 = <&mcu_fss0_ospi0_pins_default>; + + reg = <0x0 0x47040000 0x0 0x100>, + <0x0 0x50000000 0x0 0x8000000>; + + flash@0{ + compatible = "jedec,spi-nor"; + reg = <0x0>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <8>; + spi-max-frequency = <40000000>; + cdns,tshsl-ns = <60>; + cdns,tsd2d-ns = <60>; + cdns,tchsh-ns = <60>; + cdns,tslch-ns = <60>; + cdns,read-delay = <0>; + #address-cells = <1>; + #size-cells = <1>; + }; +}; + +&ospi1 { + pinctrl-names = "default"; + pinctrl-0 = <&mcu_fss0_ospi1_pins_default>; + u-boot,dm-spl; + + reg = <0x0 0x47050000 0x0 0x100>, + <0x0 0x58000000 0x0 0x8000000>; + + flash@0{ + compatible = "jedec,spi-nor"; + reg = <0x0>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; + spi-max-frequency = <40000000>; + cdns,tshsl-ns = <60>; + cdns,tsd2d-ns = <60>; + cdns,tchsh-ns = <60>; + cdns,tslch-ns = <60>; + cdns,read-delay = <2>; + #address-cells = <1>; + #size-cells = <1>; + u-boot,dm-spl; + }; +}; + #include "k3-j721e-common-proc-board-u-boot.dtsi" diff --git a/arch/arm/dts/k3-j721e-som-p0.dtsi b/arch/arm/dts/k3-j721e-som-p0.dtsi index 1e1519f1c9..8497ff3e3e 100644 --- a/arch/arm/dts/k3-j721e-som-p0.dtsi +++ b/arch/arm/dts/k3-j721e-som-p0.dtsi @@ -47,6 +47,22 @@ J721E_WKUP_IOPAD(0x28, PIN_INPUT, 1) /* (G21) MCU_OSPI0_D7.MCU_HYPERBUS0_DQ7 */ >; }; + + mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-pins-default { + pinctrl-single,pins = < + J721E_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) /* MCU_OSPI0_CLK */ + J721E_WKUP_IOPAD(0x0008, PIN_INPUT, 0) /* MCU_OSPI0_DQS */ + J721E_WKUP_IOPAD(0x000c, PIN_INPUT, 0) /* MCU_OSPI0_D0 */ + J721E_WKUP_IOPAD(0x0010, PIN_INPUT, 0) /* MCU_OSPI0_D1 */ + J721E_WKUP_IOPAD(0x0014, PIN_INPUT, 0) /* MCU_OSPI0_D2 */ + J721E_WKUP_IOPAD(0x0018, PIN_INPUT, 0) /* MCU_OSPI0_D3 */ + J721E_WKUP_IOPAD(0x001c, PIN_INPUT, 0) /* MCU_OSPI0_D4 */ + J721E_WKUP_IOPAD(0x0020, PIN_INPUT, 0) /* MCU_OSPI0_D5 */ + J721E_WKUP_IOPAD(0x0024, PIN_INPUT, 0) /* MCU_OSPI0_D6 */ + J721E_WKUP_IOPAD(0x0028, PIN_INPUT, 0) /* MCU_OSPI0_D7 */ + J721E_WKUP_IOPAD(0x002c, PIN_OUTPUT, 0) /* MCU_OSPI0_CSn0 */ + >; + }; }; &hbmc { @@ -61,3 +77,23 @@ reg = <0x0 0x0 0x4000000>; }; }; + +&ospi0 { + pinctrl-names = "default"; + pinctrl-0 = <&mcu_fss0_ospi0_pins_default>; + + flash@0{ + compatible = "jedec,spi-nor"; + reg = <0x0>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <8>; + spi-max-frequency = <40000000>; + cdns,tshsl-ns = <60>; + cdns,tsd2d-ns = <60>; + cdns,tchsh-ns = <60>; + cdns,tslch-ns = <60>; + cdns,read-delay = <0>; + #address-cells = <1>; + #size-cells = <1>; + }; +}; diff --git a/arch/arm/dts/k3-j721e.dtsi b/arch/arm/dts/k3-j721e.dtsi index 68ba517e50..6bd5aabe23 100644 --- a/arch/arm/dts/k3-j721e.dtsi +++ b/arch/arm/dts/k3-j721e.dtsi @@ -40,6 +40,8 @@ i2c7 = &main_i2c4; i2c8 = &main_i2c5; i2c9 = &main_i2c6; + spi0 = &ospi0; + spi1 = &ospi1; }; chosen { }; @@ -135,6 +137,7 @@ #size-cells = <2>; ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */ <0x00 0x00600000 0x00 0x00600000 0x00 0x00031100>, /* GPIO */ + <0x00 0x00700000 0x00 0x00700000 0x00 0x00001000>, /* ESM */ <0x00 0x00900000 0x00 0x00900000 0x00 0x00012000>, /* serdes */ <0x00 0x00A40000 0x00 0x00A40000 0x00 0x00000800>, /* timesync router */ <0x00 0x01000000 0x00 0x01000000 0x00 0x0af02400>, /* Most peripherals */ diff --git a/arch/arm/dts/stm32mp15-ddr.dtsi b/arch/arm/dts/stm32mp15-ddr.dtsi index 38f29bb789..8b20b5e173 100644 --- a/arch/arm/dts/stm32mp15-ddr.dtsi +++ b/arch/arm/dts/stm32mp15-ddr.dtsi @@ -133,6 +133,7 @@ DDR_MR3 >; +#ifdef DDR_PHY_CAL_SKIP st,phy-cal = < DDR_DX0DLLCR DDR_DX0DQTR @@ -148,6 +149,8 @@ DDR_DX3DQSTR >; +#endif + status = "okay"; }; }; diff --git a/arch/arm/dts/stm32mp15-pinctrl.dtsi b/arch/arm/dts/stm32mp15-pinctrl.dtsi new file mode 100644 index 0000000000..53df840f85 --- /dev/null +++ b/arch/arm/dts/stm32mp15-pinctrl.dtsi @@ -0,0 +1,1114 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2017 - All Rights Reserved + * Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics. + */ +#include <dt-bindings/pinctrl/stm32-pinfunc.h> + +&pinctrl { + adc1_in6_pins_a: adc1-in6 { + pins { + pinmux = <STM32_PINMUX('F', 12, ANALOG)>; + }; + }; + + adc12_ain_pins_a: adc12-ain-0 { + pins { + pinmux = <STM32_PINMUX('C', 3, ANALOG)>, /* ADC1 in13 */ + <STM32_PINMUX('F', 12, ANALOG)>, /* ADC1 in6 */ + <STM32_PINMUX('F', 13, ANALOG)>, /* ADC2 in2 */ + <STM32_PINMUX('F', 14, ANALOG)>; /* ADC2 in6 */ + }; + }; + + adc12_usb_cc_pins_a: adc12-usb-cc-pins-0 { + pins { + pinmux = <STM32_PINMUX('A', 4, ANALOG)>, /* ADC12 in18 */ + <STM32_PINMUX('A', 5, ANALOG)>; /* ADC12 in19 */ + }; + }; + + cec_pins_a: cec-0 { + pins { + pinmux = <STM32_PINMUX('A', 15, AF4)>; + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + cec_pins_sleep_a: cec-sleep-0 { + pins { + pinmux = <STM32_PINMUX('A', 15, ANALOG)>; /* HDMI_CEC */ + }; + }; + + cec_pins_b: cec-1 { + pins { + pinmux = <STM32_PINMUX('B', 6, AF5)>; + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + cec_pins_sleep_b: cec-sleep-1 { + pins { + pinmux = <STM32_PINMUX('B', 6, ANALOG)>; /* HDMI_CEC */ + }; + }; + + dac_ch1_pins_a: dac-ch1 { + pins { + pinmux = <STM32_PINMUX('A', 4, ANALOG)>; + }; + }; + + dac_ch2_pins_a: dac-ch2 { + pins { + pinmux = <STM32_PINMUX('A', 5, ANALOG)>; + }; + }; + + dcmi_pins_a: dcmi-0 { + pins { + pinmux = <STM32_PINMUX('H', 8, AF13)>,/* DCMI_HSYNC */ + <STM32_PINMUX('B', 7, AF13)>,/* DCMI_VSYNC */ + <STM32_PINMUX('A', 6, AF13)>,/* DCMI_PIXCLK */ + <STM32_PINMUX('H', 9, AF13)>,/* DCMI_D0 */ + <STM32_PINMUX('H', 10, AF13)>,/* DCMI_D1 */ + <STM32_PINMUX('H', 11, AF13)>,/* DCMI_D2 */ + <STM32_PINMUX('H', 12, AF13)>,/* DCMI_D3 */ + <STM32_PINMUX('H', 14, AF13)>,/* DCMI_D4 */ + <STM32_PINMUX('I', 4, AF13)>,/* DCMI_D5 */ + <STM32_PINMUX('B', 8, AF13)>,/* DCMI_D6 */ + <STM32_PINMUX('E', 6, AF13)>,/* DCMI_D7 */ + <STM32_PINMUX('I', 1, AF13)>,/* DCMI_D8 */ + <STM32_PINMUX('H', 7, AF13)>,/* DCMI_D9 */ + <STM32_PINMUX('I', 3, AF13)>,/* DCMI_D10 */ + <STM32_PINMUX('H', 15, AF13)>;/* DCMI_D11 */ + bias-disable; + }; + }; + + dcmi_sleep_pins_a: dcmi-sleep-0 { + pins { + pinmux = <STM32_PINMUX('H', 8, ANALOG)>,/* DCMI_HSYNC */ + <STM32_PINMUX('B', 7, ANALOG)>,/* DCMI_VSYNC */ + <STM32_PINMUX('A', 6, ANALOG)>,/* DCMI_PIXCLK */ + <STM32_PINMUX('H', 9, ANALOG)>,/* DCMI_D0 */ + <STM32_PINMUX('H', 10, ANALOG)>,/* DCMI_D1 */ + <STM32_PINMUX('H', 11, ANALOG)>,/* DCMI_D2 */ + <STM32_PINMUX('H', 12, ANALOG)>,/* DCMI_D3 */ + <STM32_PINMUX('H', 14, ANALOG)>,/* DCMI_D4 */ + <STM32_PINMUX('I', 4, ANALOG)>,/* DCMI_D5 */ + <STM32_PINMUX('B', 8, ANALOG)>,/* DCMI_D6 */ + <STM32_PINMUX('E', 6, ANALOG)>,/* DCMI_D7 */ + <STM32_PINMUX('I', 1, ANALOG)>,/* DCMI_D8 */ + <STM32_PINMUX('H', 7, ANALOG)>,/* DCMI_D9 */ + <STM32_PINMUX('I', 3, ANALOG)>,/* DCMI_D10 */ + <STM32_PINMUX('H', 15, ANALOG)>;/* DCMI_D11 */ + }; + }; + + ethernet0_rgmii_pins_a: rgmii-0 { + pins1 { + pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */ + <STM32_PINMUX('G', 4, AF11)>, /* ETH_RGMII_GTX_CLK */ + <STM32_PINMUX('G', 13, AF11)>, /* ETH_RGMII_TXD0 */ + <STM32_PINMUX('G', 14, AF11)>, /* ETH_RGMII_TXD1 */ + <STM32_PINMUX('C', 2, AF11)>, /* ETH_RGMII_TXD2 */ + <STM32_PINMUX('E', 2, AF11)>, /* ETH_RGMII_TXD3 */ + <STM32_PINMUX('B', 11, AF11)>, /* ETH_RGMII_TX_CTL */ + <STM32_PINMUX('C', 1, AF11)>; /* ETH_MDC */ + bias-disable; + drive-push-pull; + slew-rate = <2>; + }; + pins2 { + pinmux = <STM32_PINMUX('A', 2, AF11)>; /* ETH_MDIO */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins3 { + pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RGMII_RXD0 */ + <STM32_PINMUX('C', 5, AF11)>, /* ETH_RGMII_RXD1 */ + <STM32_PINMUX('B', 0, AF11)>, /* ETH_RGMII_RXD2 */ + <STM32_PINMUX('B', 1, AF11)>, /* ETH_RGMII_RXD3 */ + <STM32_PINMUX('A', 1, AF11)>, /* ETH_RGMII_RX_CLK */ + <STM32_PINMUX('A', 7, AF11)>; /* ETH_RGMII_RX_CTL */ + bias-disable; + }; + }; + + ethernet0_rgmii_pins_sleep_a: rgmii-sleep-0 { + pins1 { + pinmux = <STM32_PINMUX('G', 5, ANALOG)>, /* ETH_RGMII_CLK125 */ + <STM32_PINMUX('G', 4, ANALOG)>, /* ETH_RGMII_GTX_CLK */ + <STM32_PINMUX('G', 13, ANALOG)>, /* ETH_RGMII_TXD0 */ + <STM32_PINMUX('G', 14, ANALOG)>, /* ETH_RGMII_TXD1 */ + <STM32_PINMUX('C', 2, ANALOG)>, /* ETH_RGMII_TXD2 */ + <STM32_PINMUX('E', 2, ANALOG)>, /* ETH_RGMII_TXD3 */ + <STM32_PINMUX('B', 11, ANALOG)>, /* ETH_RGMII_TX_CTL */ + <STM32_PINMUX('A', 2, ANALOG)>, /* ETH_MDIO */ + <STM32_PINMUX('C', 1, ANALOG)>, /* ETH_MDC */ + <STM32_PINMUX('C', 4, ANALOG)>, /* ETH_RGMII_RXD0 */ + <STM32_PINMUX('C', 5, ANALOG)>, /* ETH_RGMII_RXD1 */ + <STM32_PINMUX('B', 0, ANALOG)>, /* ETH_RGMII_RXD2 */ + <STM32_PINMUX('B', 1, ANALOG)>, /* ETH_RGMII_RXD3 */ + <STM32_PINMUX('A', 1, ANALOG)>, /* ETH_RGMII_RX_CLK */ + <STM32_PINMUX('A', 7, ANALOG)>; /* ETH_RGMII_RX_CTL */ + }; + }; + + fmc_pins_a: fmc-0 { + pins1 { + pinmux = <STM32_PINMUX('D', 4, AF12)>, /* FMC_NOE */ + <STM32_PINMUX('D', 5, AF12)>, /* FMC_NWE */ + <STM32_PINMUX('D', 11, AF12)>, /* FMC_A16_FMC_CLE */ + <STM32_PINMUX('D', 12, AF12)>, /* FMC_A17_FMC_ALE */ + <STM32_PINMUX('D', 14, AF12)>, /* FMC_D0 */ + <STM32_PINMUX('D', 15, AF12)>, /* FMC_D1 */ + <STM32_PINMUX('D', 0, AF12)>, /* FMC_D2 */ + <STM32_PINMUX('D', 1, AF12)>, /* FMC_D3 */ + <STM32_PINMUX('E', 7, AF12)>, /* FMC_D4 */ + <STM32_PINMUX('E', 8, AF12)>, /* FMC_D5 */ + <STM32_PINMUX('E', 9, AF12)>, /* FMC_D6 */ + <STM32_PINMUX('E', 10, AF12)>, /* FMC_D7 */ + <STM32_PINMUX('G', 9, AF12)>; /* FMC_NE2_FMC_NCE */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + pins2 { + pinmux = <STM32_PINMUX('D', 6, AF12)>; /* FMC_NWAIT */ + bias-pull-up; + }; + }; + + fmc_sleep_pins_a: fmc-sleep-0 { + pins { + pinmux = <STM32_PINMUX('D', 4, ANALOG)>, /* FMC_NOE */ + <STM32_PINMUX('D', 5, ANALOG)>, /* FMC_NWE */ + <STM32_PINMUX('D', 11, ANALOG)>, /* FMC_A16_FMC_CLE */ + <STM32_PINMUX('D', 12, ANALOG)>, /* FMC_A17_FMC_ALE */ + <STM32_PINMUX('D', 14, ANALOG)>, /* FMC_D0 */ + <STM32_PINMUX('D', 15, ANALOG)>, /* FMC_D1 */ + <STM32_PINMUX('D', 0, ANALOG)>, /* FMC_D2 */ + <STM32_PINMUX('D', 1, ANALOG)>, /* FMC_D3 */ + <STM32_PINMUX('E', 7, ANALOG)>, /* FMC_D4 */ + <STM32_PINMUX('E', 8, ANALOG)>, /* FMC_D5 */ + <STM32_PINMUX('E', 9, ANALOG)>, /* FMC_D6 */ + <STM32_PINMUX('E', 10, ANALOG)>, /* FMC_D7 */ + <STM32_PINMUX('D', 6, ANALOG)>, /* FMC_NWAIT */ + <STM32_PINMUX('G', 9, ANALOG)>; /* FMC_NE2_FMC_NCE */ + }; + }; + + i2c1_pins_a: i2c1-0 { + pins { + pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */ + <STM32_PINMUX('F', 15, AF5)>; /* I2C1_SDA */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + i2c1_pins_sleep_a: i2c1-1 { + pins { + pinmux = <STM32_PINMUX('D', 12, ANALOG)>, /* I2C1_SCL */ + <STM32_PINMUX('F', 15, ANALOG)>; /* I2C1_SDA */ + }; + }; + + i2c1_pins_b: i2c1-2 { + pins { + pinmux = <STM32_PINMUX('F', 14, AF5)>, /* I2C1_SCL */ + <STM32_PINMUX('F', 15, AF5)>; /* I2C1_SDA */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + i2c1_pins_sleep_b: i2c1-3 { + pins { + pinmux = <STM32_PINMUX('F', 14, ANALOG)>, /* I2C1_SCL */ + <STM32_PINMUX('F', 15, ANALOG)>; /* I2C1_SDA */ + }; + }; + + i2c2_pins_a: i2c2-0 { + pins { + pinmux = <STM32_PINMUX('H', 4, AF4)>, /* I2C2_SCL */ + <STM32_PINMUX('H', 5, AF4)>; /* I2C2_SDA */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + i2c2_pins_sleep_a: i2c2-1 { + pins { + pinmux = <STM32_PINMUX('H', 4, ANALOG)>, /* I2C2_SCL */ + <STM32_PINMUX('H', 5, ANALOG)>; /* I2C2_SDA */ + }; + }; + + i2c2_pins_b1: i2c2-2 { + pins { + pinmux = <STM32_PINMUX('H', 5, AF4)>; /* I2C2_SDA */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + i2c2_pins_sleep_b1: i2c2-3 { + pins { + pinmux = <STM32_PINMUX('H', 5, ANALOG)>; /* I2C2_SDA */ + }; + }; + + i2c5_pins_a: i2c5-0 { + pins { + pinmux = <STM32_PINMUX('A', 11, AF4)>, /* I2C5_SCL */ + <STM32_PINMUX('A', 12, AF4)>; /* I2C5_SDA */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + i2c5_pins_sleep_a: i2c5-1 { + pins { + pinmux = <STM32_PINMUX('A', 11, ANALOG)>, /* I2C5_SCL */ + <STM32_PINMUX('A', 12, ANALOG)>; /* I2C5_SDA */ + + }; + }; + + i2s2_pins_a: i2s2-0 { + pins { + pinmux = <STM32_PINMUX('I', 3, AF5)>, /* I2S2_SDO */ + <STM32_PINMUX('B', 9, AF5)>, /* I2S2_WS */ + <STM32_PINMUX('A', 9, AF5)>; /* I2S2_CK */ + slew-rate = <1>; + drive-push-pull; + bias-disable; + }; + }; + + i2s2_pins_sleep_a: i2s2-1 { + pins { + pinmux = <STM32_PINMUX('I', 3, ANALOG)>, /* I2S2_SDO */ + <STM32_PINMUX('B', 9, ANALOG)>, /* I2S2_WS */ + <STM32_PINMUX('A', 9, ANALOG)>; /* I2S2_CK */ + }; + }; + + ltdc_pins_a: ltdc-a-0 { + pins { + pinmux = <STM32_PINMUX('G', 7, AF14)>, /* LCD_CLK */ + <STM32_PINMUX('I', 10, AF14)>, /* LCD_HSYNC */ + <STM32_PINMUX('I', 9, AF14)>, /* LCD_VSYNC */ + <STM32_PINMUX('F', 10, AF14)>, /* LCD_DE */ + <STM32_PINMUX('H', 2, AF14)>, /* LCD_R0 */ + <STM32_PINMUX('H', 3, AF14)>, /* LCD_R1 */ + <STM32_PINMUX('H', 8, AF14)>, /* LCD_R2 */ + <STM32_PINMUX('H', 9, AF14)>, /* LCD_R3 */ + <STM32_PINMUX('H', 10, AF14)>, /* LCD_R4 */ + <STM32_PINMUX('C', 0, AF14)>, /* LCD_R5 */ + <STM32_PINMUX('H', 12, AF14)>, /* LCD_R6 */ + <STM32_PINMUX('E', 15, AF14)>, /* LCD_R7 */ + <STM32_PINMUX('E', 5, AF14)>, /* LCD_G0 */ + <STM32_PINMUX('E', 6, AF14)>, /* LCD_G1 */ + <STM32_PINMUX('H', 13, AF14)>, /* LCD_G2 */ + <STM32_PINMUX('H', 14, AF14)>, /* LCD_G3 */ + <STM32_PINMUX('H', 15, AF14)>, /* LCD_G4 */ + <STM32_PINMUX('I', 0, AF14)>, /* LCD_G5 */ + <STM32_PINMUX('I', 1, AF14)>, /* LCD_G6 */ + <STM32_PINMUX('I', 2, AF14)>, /* LCD_G7 */ + <STM32_PINMUX('D', 9, AF14)>, /* LCD_B0 */ + <STM32_PINMUX('G', 12, AF14)>, /* LCD_B1 */ + <STM32_PINMUX('G', 10, AF14)>, /* LCD_B2 */ + <STM32_PINMUX('D', 10, AF14)>, /* LCD_B3 */ + <STM32_PINMUX('I', 4, AF14)>, /* LCD_B4 */ + <STM32_PINMUX('A', 3, AF14)>, /* LCD_B5 */ + <STM32_PINMUX('B', 8, AF14)>, /* LCD_B6 */ + <STM32_PINMUX('D', 8, AF14)>; /* LCD_B7 */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + }; + + ltdc_pins_sleep_a: ltdc-a-1 { + pins { + pinmux = <STM32_PINMUX('G', 7, ANALOG)>, /* LCD_CLK */ + <STM32_PINMUX('I', 10, ANALOG)>, /* LCD_HSYNC */ + <STM32_PINMUX('I', 9, ANALOG)>, /* LCD_VSYNC */ + <STM32_PINMUX('F', 10, ANALOG)>, /* LCD_DE */ + <STM32_PINMUX('H', 2, ANALOG)>, /* LCD_R0 */ + <STM32_PINMUX('H', 3, ANALOG)>, /* LCD_R1 */ + <STM32_PINMUX('H', 8, ANALOG)>, /* LCD_R2 */ + <STM32_PINMUX('H', 9, ANALOG)>, /* LCD_R3 */ + <STM32_PINMUX('H', 10, ANALOG)>, /* LCD_R4 */ + <STM32_PINMUX('C', 0, ANALOG)>, /* LCD_R5 */ + <STM32_PINMUX('H', 12, ANALOG)>, /* LCD_R6 */ + <STM32_PINMUX('E', 15, ANALOG)>, /* LCD_R7 */ + <STM32_PINMUX('E', 5, ANALOG)>, /* LCD_G0 */ + <STM32_PINMUX('E', 6, ANALOG)>, /* LCD_G1 */ + <STM32_PINMUX('H', 13, ANALOG)>, /* LCD_G2 */ + <STM32_PINMUX('H', 14, ANALOG)>, /* LCD_G3 */ + <STM32_PINMUX('H', 15, ANALOG)>, /* LCD_G4 */ + <STM32_PINMUX('I', 0, ANALOG)>, /* LCD_G5 */ + <STM32_PINMUX('I', 1, ANALOG)>, /* LCD_G6 */ + <STM32_PINMUX('I', 2, ANALOG)>, /* LCD_G7 */ + <STM32_PINMUX('D', 9, ANALOG)>, /* LCD_B0 */ + <STM32_PINMUX('G', 12, ANALOG)>, /* LCD_B1 */ + <STM32_PINMUX('G', 10, ANALOG)>, /* LCD_B2 */ + <STM32_PINMUX('D', 10, ANALOG)>, /* LCD_B3 */ + <STM32_PINMUX('I', 4, ANALOG)>, /* LCD_B4 */ + <STM32_PINMUX('A', 3, ANALOG)>, /* LCD_B5 */ + <STM32_PINMUX('B', 8, ANALOG)>, /* LCD_B6 */ + <STM32_PINMUX('D', 8, ANALOG)>; /* LCD_B7 */ + }; + }; + + ltdc_pins_b: ltdc-b-0 { + pins { + pinmux = <STM32_PINMUX('I', 14, AF14)>, /* LCD_CLK */ + <STM32_PINMUX('I', 12, AF14)>, /* LCD_HSYNC */ + <STM32_PINMUX('I', 13, AF14)>, /* LCD_VSYNC */ + <STM32_PINMUX('K', 7, AF14)>, /* LCD_DE */ + <STM32_PINMUX('I', 15, AF14)>, /* LCD_R0 */ + <STM32_PINMUX('J', 0, AF14)>, /* LCD_R1 */ + <STM32_PINMUX('J', 1, AF14)>, /* LCD_R2 */ + <STM32_PINMUX('J', 2, AF14)>, /* LCD_R3 */ + <STM32_PINMUX('J', 3, AF14)>, /* LCD_R4 */ + <STM32_PINMUX('J', 4, AF14)>, /* LCD_R5 */ + <STM32_PINMUX('J', 5, AF14)>, /* LCD_R6 */ + <STM32_PINMUX('J', 6, AF14)>, /* LCD_R7 */ + <STM32_PINMUX('J', 7, AF14)>, /* LCD_G0 */ + <STM32_PINMUX('J', 8, AF14)>, /* LCD_G1 */ + <STM32_PINMUX('J', 9, AF14)>, /* LCD_G2 */ + <STM32_PINMUX('J', 10, AF14)>, /* LCD_G3 */ + <STM32_PINMUX('J', 11, AF14)>, /* LCD_G4 */ + <STM32_PINMUX('K', 0, AF14)>, /* LCD_G5 */ + <STM32_PINMUX('K', 1, AF14)>, /* LCD_G6 */ + <STM32_PINMUX('K', 2, AF14)>, /* LCD_G7 */ + <STM32_PINMUX('J', 12, AF14)>, /* LCD_B0 */ + <STM32_PINMUX('J', 13, AF14)>, /* LCD_B1 */ + <STM32_PINMUX('J', 14, AF14)>, /* LCD_B2 */ + <STM32_PINMUX('J', 15, AF14)>, /* LCD_B3 */ + <STM32_PINMUX('K', 3, AF14)>, /* LCD_B4 */ + <STM32_PINMUX('K', 4, AF14)>, /* LCD_B5 */ + <STM32_PINMUX('K', 5, AF14)>, /* LCD_B6 */ + <STM32_PINMUX('K', 6, AF14)>; /* LCD_B7 */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + }; + + ltdc_pins_sleep_b: ltdc-b-1 { + pins { + pinmux = <STM32_PINMUX('I', 14, ANALOG)>, /* LCD_CLK */ + <STM32_PINMUX('I', 12, ANALOG)>, /* LCD_HSYNC */ + <STM32_PINMUX('I', 13, ANALOG)>, /* LCD_VSYNC */ + <STM32_PINMUX('K', 7, ANALOG)>, /* LCD_DE */ + <STM32_PINMUX('I', 15, ANALOG)>, /* LCD_R0 */ + <STM32_PINMUX('J', 0, ANALOG)>, /* LCD_R1 */ + <STM32_PINMUX('J', 1, ANALOG)>, /* LCD_R2 */ + <STM32_PINMUX('J', 2, ANALOG)>, /* LCD_R3 */ + <STM32_PINMUX('J', 3, ANALOG)>, /* LCD_R4 */ + <STM32_PINMUX('J', 4, ANALOG)>, /* LCD_R5 */ + <STM32_PINMUX('J', 5, ANALOG)>, /* LCD_R6 */ + <STM32_PINMUX('J', 6, ANALOG)>, /* LCD_R7 */ + <STM32_PINMUX('J', 7, ANALOG)>, /* LCD_G0 */ + <STM32_PINMUX('J', 8, ANALOG)>, /* LCD_G1 */ + <STM32_PINMUX('J', 9, ANALOG)>, /* LCD_G2 */ + <STM32_PINMUX('J', 10, ANALOG)>, /* LCD_G3 */ + <STM32_PINMUX('J', 11, ANALOG)>, /* LCD_G4 */ + <STM32_PINMUX('K', 0, ANALOG)>, /* LCD_G5 */ + <STM32_PINMUX('K', 1, ANALOG)>, /* LCD_G6 */ + <STM32_PINMUX('K', 2, ANALOG)>, /* LCD_G7 */ + <STM32_PINMUX('J', 12, ANALOG)>, /* LCD_B0 */ + <STM32_PINMUX('J', 13, ANALOG)>, /* LCD_B1 */ + <STM32_PINMUX('J', 14, ANALOG)>, /* LCD_B2 */ + <STM32_PINMUX('J', 15, ANALOG)>, /* LCD_B3 */ + <STM32_PINMUX('K', 3, ANALOG)>, /* LCD_B4 */ + <STM32_PINMUX('K', 4, ANALOG)>, /* LCD_B5 */ + <STM32_PINMUX('K', 5, ANALOG)>, /* LCD_B6 */ + <STM32_PINMUX('K', 6, ANALOG)>; /* LCD_B7 */ + }; + }; + + m_can1_pins_a: m-can1-0 { + pins1 { + pinmux = <STM32_PINMUX('H', 13, AF9)>; /* CAN1_TX */ + slew-rate = <1>; + drive-push-pull; + bias-disable; + }; + pins2 { + pinmux = <STM32_PINMUX('I', 9, AF9)>; /* CAN1_RX */ + bias-disable; + }; + }; + + m_can1_sleep_pins_a: m_can1-sleep-0 { + pins { + pinmux = <STM32_PINMUX('H', 13, ANALOG)>, /* CAN1_TX */ + <STM32_PINMUX('I', 9, ANALOG)>; /* CAN1_RX */ + }; + }; + + pwm1_pins_a: pwm1-0 { + pins { + pinmux = <STM32_PINMUX('E', 9, AF1)>, /* TIM1_CH1 */ + <STM32_PINMUX('E', 11, AF1)>, /* TIM1_CH2 */ + <STM32_PINMUX('E', 14, AF1)>; /* TIM1_CH4 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm1_sleep_pins_a: pwm1-sleep-0 { + pins { + pinmux = <STM32_PINMUX('E', 9, ANALOG)>, /* TIM1_CH1 */ + <STM32_PINMUX('E', 11, ANALOG)>, /* TIM1_CH2 */ + <STM32_PINMUX('E', 14, ANALOG)>; /* TIM1_CH4 */ + }; + }; + + pwm2_pins_a: pwm2-0 { + pins { + pinmux = <STM32_PINMUX('A', 3, AF1)>; /* TIM2_CH4 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm2_sleep_pins_a: pwm2-sleep-0 { + pins { + pinmux = <STM32_PINMUX('A', 3, ANALOG)>; /* TIM2_CH4 */ + }; + }; + + pwm3_pins_a: pwm3-0 { + pins { + pinmux = <STM32_PINMUX('C', 7, AF2)>; /* TIM3_CH2 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm3_sleep_pins_a: pwm3-sleep-0 { + pins { + pinmux = <STM32_PINMUX('C', 7, ANALOG)>; /* TIM3_CH2 */ + }; + }; + + pwm4_pins_a: pwm4-0 { + pins { + pinmux = <STM32_PINMUX('D', 14, AF2)>, /* TIM4_CH3 */ + <STM32_PINMUX('D', 15, AF2)>; /* TIM4_CH4 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm4_sleep_pins_a: pwm4-sleep-0 { + pins { + pinmux = <STM32_PINMUX('D', 14, ANALOG)>, /* TIM4_CH3 */ + <STM32_PINMUX('D', 15, ANALOG)>; /* TIM4_CH4 */ + }; + }; + + pwm4_pins_b: pwm4-1 { + pins { + pinmux = <STM32_PINMUX('D', 13, AF2)>; /* TIM4_CH2 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm4_sleep_pins_b: pwm4-sleep-1 { + pins { + pinmux = <STM32_PINMUX('D', 13, ANALOG)>; /* TIM4_CH2 */ + }; + }; + + pwm5_pins_a: pwm5-0 { + pins { + pinmux = <STM32_PINMUX('H', 11, AF2)>; /* TIM5_CH2 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm5_sleep_pins_a: pwm5-sleep-0 { + pins { + pinmux = <STM32_PINMUX('H', 11, ANALOG)>; /* TIM5_CH2 */ + }; + }; + + pwm8_pins_a: pwm8-0 { + pins { + pinmux = <STM32_PINMUX('I', 2, AF3)>; /* TIM8_CH4 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm8_sleep_pins_a: pwm8-sleep-0 { + pins { + pinmux = <STM32_PINMUX('I', 2, ANALOG)>; /* TIM8_CH4 */ + }; + }; + + pwm12_pins_a: pwm12-0 { + pins { + pinmux = <STM32_PINMUX('H', 6, AF2)>; /* TIM12_CH1 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm12_sleep_pins_a: pwm12-sleep-0 { + pins { + pinmux = <STM32_PINMUX('H', 6, ANALOG)>; /* TIM12_CH1 */ + }; + }; + + qspi_clk_pins_a: qspi-clk-0 { + pins { + pinmux = <STM32_PINMUX('F', 10, AF9)>; /* QSPI_CLK */ + bias-disable; + drive-push-pull; + slew-rate = <3>; + }; + }; + + qspi_clk_sleep_pins_a: qspi-clk-sleep-0 { + pins { + pinmux = <STM32_PINMUX('F', 10, ANALOG)>; /* QSPI_CLK */ + }; + }; + + qspi_bk1_pins_a: qspi-bk1-0 { + pins1 { + pinmux = <STM32_PINMUX('F', 8, AF10)>, /* QSPI_BK1_IO0 */ + <STM32_PINMUX('F', 9, AF10)>, /* QSPI_BK1_IO1 */ + <STM32_PINMUX('F', 7, AF9)>, /* QSPI_BK1_IO2 */ + <STM32_PINMUX('F', 6, AF9)>; /* QSPI_BK1_IO3 */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + pins2 { + pinmux = <STM32_PINMUX('B', 6, AF10)>; /* QSPI_BK1_NCS */ + bias-pull-up; + drive-push-pull; + slew-rate = <1>; + }; + }; + + qspi_bk1_sleep_pins_a: qspi-bk1-sleep-0 { + pins { + pinmux = <STM32_PINMUX('F', 8, ANALOG)>, /* QSPI_BK1_IO0 */ + <STM32_PINMUX('F', 9, ANALOG)>, /* QSPI_BK1_IO1 */ + <STM32_PINMUX('F', 7, ANALOG)>, /* QSPI_BK1_IO2 */ + <STM32_PINMUX('F', 6, ANALOG)>, /* QSPI_BK1_IO3 */ + <STM32_PINMUX('B', 6, ANALOG)>; /* QSPI_BK1_NCS */ + }; + }; + + qspi_bk2_pins_a: qspi-bk2-0 { + pins1 { + pinmux = <STM32_PINMUX('H', 2, AF9)>, /* QSPI_BK2_IO0 */ + <STM32_PINMUX('H', 3, AF9)>, /* QSPI_BK2_IO1 */ + <STM32_PINMUX('G', 10, AF11)>, /* QSPI_BK2_IO2 */ + <STM32_PINMUX('G', 7, AF11)>; /* QSPI_BK2_IO3 */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + pins2 { + pinmux = <STM32_PINMUX('C', 0, AF10)>; /* QSPI_BK2_NCS */ + bias-pull-up; + drive-push-pull; + slew-rate = <1>; + }; + }; + + qspi_bk2_sleep_pins_a: qspi-bk2-sleep-0 { + pins { + pinmux = <STM32_PINMUX('H', 2, ANALOG)>, /* QSPI_BK2_IO0 */ + <STM32_PINMUX('H', 3, ANALOG)>, /* QSPI_BK2_IO1 */ + <STM32_PINMUX('G', 10, ANALOG)>, /* QSPI_BK2_IO2 */ + <STM32_PINMUX('G', 7, ANALOG)>, /* QSPI_BK2_IO3 */ + <STM32_PINMUX('C', 0, ANALOG)>; /* QSPI_BK2_NCS */ + }; + }; + + sai2a_pins_a: sai2a-0 { + pins { + pinmux = <STM32_PINMUX('I', 5, AF10)>, /* SAI2_SCK_A */ + <STM32_PINMUX('I', 6, AF10)>, /* SAI2_SD_A */ + <STM32_PINMUX('I', 7, AF10)>, /* SAI2_FS_A */ + <STM32_PINMUX('E', 0, AF10)>; /* SAI2_MCLK_A */ + slew-rate = <0>; + drive-push-pull; + bias-disable; + }; + }; + + sai2a_sleep_pins_a: sai2a-1 { + pins { + pinmux = <STM32_PINMUX('I', 5, ANALOG)>, /* SAI2_SCK_A */ + <STM32_PINMUX('I', 6, ANALOG)>, /* SAI2_SD_A */ + <STM32_PINMUX('I', 7, ANALOG)>, /* SAI2_FS_A */ + <STM32_PINMUX('E', 0, ANALOG)>; /* SAI2_MCLK_A */ + }; + }; + + sai2b_pins_a: sai2b-0 { + pins1 { + pinmux = <STM32_PINMUX('E', 12, AF10)>, /* SAI2_SCK_B */ + <STM32_PINMUX('E', 13, AF10)>, /* SAI2_FS_B */ + <STM32_PINMUX('E', 14, AF10)>; /* SAI2_MCLK_B */ + slew-rate = <0>; + drive-push-pull; + bias-disable; + }; + pins2 { + pinmux = <STM32_PINMUX('F', 11, AF10)>; /* SAI2_SD_B */ + bias-disable; + }; + }; + + sai2b_sleep_pins_a: sai2b-1 { + pins { + pinmux = <STM32_PINMUX('F', 11, ANALOG)>, /* SAI2_SD_B */ + <STM32_PINMUX('E', 12, ANALOG)>, /* SAI2_SCK_B */ + <STM32_PINMUX('E', 13, ANALOG)>, /* SAI2_FS_B */ + <STM32_PINMUX('E', 14, ANALOG)>; /* SAI2_MCLK_B */ + }; + }; + + sai2b_pins_b: sai2b-2 { + pins { + pinmux = <STM32_PINMUX('F', 11, AF10)>; /* SAI2_SD_B */ + bias-disable; + }; + }; + + sai2b_sleep_pins_b: sai2b-3 { + pins { + pinmux = <STM32_PINMUX('F', 11, ANALOG)>; /* SAI2_SD_B */ + }; + }; + + sai4a_pins_a: sai4a-0 { + pins { + pinmux = <STM32_PINMUX('B', 5, AF10)>; /* SAI4_SD_A */ + slew-rate = <0>; + drive-push-pull; + bias-disable; + }; + }; + + sai4a_sleep_pins_a: sai4a-1 { + pins { + pinmux = <STM32_PINMUX('B', 5, ANALOG)>; /* SAI4_SD_A */ + }; + }; + + sdmmc1_b4_pins_a: sdmmc1-b4-0 { + pins1 { + pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */ + <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */ + <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */ + <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */ + <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */ + slew-rate = <1>; + drive-push-pull; + bias-disable; + }; + pins2 { + pinmux = <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */ + slew-rate = <2>; + drive-push-pull; + bias-disable; + }; + }; + + sdmmc1_b4_od_pins_a: sdmmc1-b4-od-0 { + pins1 { + pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */ + <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */ + <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */ + <STM32_PINMUX('C', 11, AF12)>; /* SDMMC1_D3 */ + slew-rate = <1>; + drive-push-pull; + bias-disable; + }; + pins2 { + pinmux = <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */ + slew-rate = <2>; + drive-push-pull; + bias-disable; + }; + pins3 { + pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */ + slew-rate = <1>; + drive-open-drain; + bias-disable; + }; + }; + + sdmmc1_b4_sleep_pins_a: sdmmc1-b4-sleep-0 { + pins { + pinmux = <STM32_PINMUX('C', 8, ANALOG)>, /* SDMMC1_D0 */ + <STM32_PINMUX('C', 9, ANALOG)>, /* SDMMC1_D1 */ + <STM32_PINMUX('C', 10, ANALOG)>, /* SDMMC1_D2 */ + <STM32_PINMUX('C', 11, ANALOG)>, /* SDMMC1_D3 */ + <STM32_PINMUX('C', 12, ANALOG)>, /* SDMMC1_CK */ + <STM32_PINMUX('D', 2, ANALOG)>; /* SDMMC1_CMD */ + }; + }; + + sdmmc1_dir_pins_a: sdmmc1-dir-0 { + pins1 { + pinmux = <STM32_PINMUX('F', 2, AF11)>, /* SDMMC1_D0DIR */ + <STM32_PINMUX('C', 7, AF8)>, /* SDMMC1_D123DIR */ + <STM32_PINMUX('B', 9, AF11)>; /* SDMMC1_CDIR */ + slew-rate = <1>; + drive-push-pull; + bias-pull-up; + }; + pins2{ + pinmux = <STM32_PINMUX('E', 4, AF8)>; /* SDMMC1_CKIN */ + bias-pull-up; + }; + }; + + sdmmc1_dir_sleep_pins_a: sdmmc1-dir-sleep-0 { + pins { + pinmux = <STM32_PINMUX('F', 2, ANALOG)>, /* SDMMC1_D0DIR */ + <STM32_PINMUX('C', 7, ANALOG)>, /* SDMMC1_D123DIR */ + <STM32_PINMUX('B', 9, ANALOG)>, /* SDMMC1_CDIR */ + <STM32_PINMUX('E', 4, ANALOG)>; /* SDMMC1_CKIN */ + }; + }; + + sdmmc2_b4_pins_a: sdmmc2-b4-0 { + pins1 { + pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */ + <STM32_PINMUX('B', 15, AF9)>, /* SDMMC2_D1 */ + <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */ + <STM32_PINMUX('B', 4, AF9)>, /* SDMMC2_D3 */ + <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */ + slew-rate = <1>; + drive-push-pull; + bias-pull-up; + }; + pins2 { + pinmux = <STM32_PINMUX('E', 3, AF9)>; /* SDMMC2_CK */ + slew-rate = <2>; + drive-push-pull; + bias-pull-up; + }; + }; + + sdmmc2_b4_od_pins_a: sdmmc2-b4-od-0 { + pins1 { + pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */ + <STM32_PINMUX('B', 15, AF9)>, /* SDMMC2_D1 */ + <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */ + <STM32_PINMUX('B', 4, AF9)>; /* SDMMC2_D3 */ + slew-rate = <1>; + drive-push-pull; + bias-pull-up; + }; + pins2 { + pinmux = <STM32_PINMUX('E', 3, AF9)>; /* SDMMC2_CK */ + slew-rate = <2>; + drive-push-pull; + bias-pull-up; + }; + pins3 { + pinmux = <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */ + slew-rate = <1>; + drive-open-drain; + bias-pull-up; + }; + }; + + sdmmc2_b4_sleep_pins_a: sdmmc2-b4-sleep-0 { + pins { + pinmux = <STM32_PINMUX('B', 14, ANALOG)>, /* SDMMC2_D0 */ + <STM32_PINMUX('B', 15, ANALOG)>, /* SDMMC2_D1 */ + <STM32_PINMUX('B', 3, ANALOG)>, /* SDMMC2_D2 */ + <STM32_PINMUX('B', 4, ANALOG)>, /* SDMMC2_D3 */ + <STM32_PINMUX('E', 3, ANALOG)>, /* SDMMC2_CK */ + <STM32_PINMUX('G', 6, ANALOG)>; /* SDMMC2_CMD */ + }; + }; + + sdmmc2_b4_pins_b: sdmmc2-b4-1 { + pins1 { + pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */ + <STM32_PINMUX('B', 15, AF9)>, /* SDMMC2_D1 */ + <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */ + <STM32_PINMUX('B', 4, AF9)>, /* SDMMC2_D3 */ + <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */ + slew-rate = <1>; + drive-push-pull; + bias-disable; + }; + pins2 { + pinmux = <STM32_PINMUX('E', 3, AF9)>; /* SDMMC2_CK */ + slew-rate = <2>; + drive-push-pull; + bias-disable; + }; + }; + + sdmmc2_b4_od_pins_b: sdmmc2-b4-od-1 { + pins1 { + pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */ + <STM32_PINMUX('B', 15, AF9)>, /* SDMMC2_D1 */ + <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */ + <STM32_PINMUX('B', 4, AF9)>; /* SDMMC2_D3 */ + slew-rate = <1>; + drive-push-pull; + bias-disable; + }; + pins2 { + pinmux = <STM32_PINMUX('E', 3, AF9)>; /* SDMMC2_CK */ + slew-rate = <2>; + drive-push-pull; + bias-disable; + }; + pins3 { + pinmux = <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */ + slew-rate = <1>; + drive-open-drain; + bias-disable; + }; + }; + + sdmmc2_d47_pins_a: sdmmc2-d47-0 { + pins { + pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */ + <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */ + <STM32_PINMUX('E', 5, AF9)>, /* SDMMC2_D6 */ + <STM32_PINMUX('D', 3, AF9)>; /* SDMMC2_D7 */ + slew-rate = <1>; + drive-push-pull; + bias-pull-up; + }; + }; + + sdmmc2_d47_sleep_pins_a: sdmmc2-d47-sleep-0 { + pins { + pinmux = <STM32_PINMUX('A', 8, ANALOG)>, /* SDMMC2_D4 */ + <STM32_PINMUX('A', 9, ANALOG)>, /* SDMMC2_D5 */ + <STM32_PINMUX('E', 5, ANALOG)>, /* SDMMC2_D6 */ + <STM32_PINMUX('D', 3, ANALOG)>; /* SDMMC2_D7 */ + }; + }; + + sdmmc3_b4_pins_a: sdmmc3-b4-0 { + pins1 { + pinmux = <STM32_PINMUX('F', 0, AF9)>, /* SDMMC3_D0 */ + <STM32_PINMUX('F', 4, AF9)>, /* SDMMC3_D1 */ + <STM32_PINMUX('F', 5, AF9)>, /* SDMMC3_D2 */ + <STM32_PINMUX('D', 7, AF10)>, /* SDMMC3_D3 */ + <STM32_PINMUX('F', 1, AF9)>; /* SDMMC3_CMD */ + slew-rate = <1>; + drive-push-pull; + bias-pull-up; + }; + pins2 { + pinmux = <STM32_PINMUX('G', 15, AF10)>; /* SDMMC3_CK */ + slew-rate = <2>; + drive-push-pull; + bias-pull-up; + }; + }; + + sdmmc3_b4_od_pins_a: sdmmc3-b4-od-0 { + pins1 { + pinmux = <STM32_PINMUX('F', 0, AF9)>, /* SDMMC3_D0 */ + <STM32_PINMUX('F', 4, AF9)>, /* SDMMC3_D1 */ + <STM32_PINMUX('F', 5, AF9)>, /* SDMMC3_D2 */ + <STM32_PINMUX('D', 7, AF10)>; /* SDMMC3_D3 */ + slew-rate = <1>; + drive-push-pull; + bias-pull-up; + }; + pins2 { + pinmux = <STM32_PINMUX('G', 15, AF10)>; /* SDMMC3_CK */ + slew-rate = <2>; + drive-push-pull; + bias-pull-up; + }; + pins3 { + pinmux = <STM32_PINMUX('F', 1, AF9)>; /* SDMMC2_CMD */ + slew-rate = <1>; + drive-open-drain; + bias-pull-up; + }; + }; + + sdmmc3_b4_sleep_pins_a: sdmmc3-b4-sleep-0 { + pins { + pinmux = <STM32_PINMUX('F', 0, ANALOG)>, /* SDMMC3_D0 */ + <STM32_PINMUX('F', 4, ANALOG)>, /* SDMMC3_D1 */ + <STM32_PINMUX('F', 5, ANALOG)>, /* SDMMC3_D2 */ + <STM32_PINMUX('D', 7, ANALOG)>, /* SDMMC3_D3 */ + <STM32_PINMUX('G', 15, ANALOG)>, /* SDMMC3_CK */ + <STM32_PINMUX('F', 1, ANALOG)>; /* SDMMC3_CMD */ + }; + }; + + spdifrx_pins_a: spdifrx-0 { + pins { + pinmux = <STM32_PINMUX('G', 12, AF8)>; /* SPDIF_IN1 */ + bias-disable; + }; + }; + + spdifrx_sleep_pins_a: spdifrx-1 { + pins { + pinmux = <STM32_PINMUX('G', 12, ANALOG)>; /* SPDIF_IN1 */ + }; + }; + + spi2_pins_a: spi2-0 { + pins1 { + pinmux = <STM32_PINMUX('B', 10, AF5)>, /* SPI2_SCK */ + <STM32_PINMUX('I', 0, AF5)>, /* SPI2_NSS */ + <STM32_PINMUX('I', 3, AF5)>; /* SPI2_MOSI */ + bias-disable; + drive-push-pull; + slew-rate = <3>; + }; + pins2 { + pinmux = <STM32_PINMUX('I', 2, AF5)>; /* SPI2_MISO */ + bias-disable; + }; + }; + + stusb1600_pins_a: stusb1600-0 { + pins { + pinmux = <STM32_PINMUX('I', 11, ANALOG)>; + bias-pull-up; + }; + }; + + uart4_pins_a: uart4-0 { + pins1 { + pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */ + bias-disable; + }; + }; + + uart4_pins_b: uart4-1 { + pins1 { + pinmux = <STM32_PINMUX('D', 1, AF8)>; /* UART4_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */ + bias-disable; + }; + }; + + uart7_pins_a: uart7-0 { + pins1 { + pinmux = <STM32_PINMUX('E', 8, AF7)>; /* UART4_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('E', 7, AF7)>, /* UART4_RX */ + <STM32_PINMUX('E', 10, AF7)>, /* UART4_CTS */ + <STM32_PINMUX('E', 9, AF7)>; /* UART4_RTS */ + bias-disable; + }; + }; +}; + +&pinctrl_z { + i2c2_pins_b2: i2c2-0 { + pins { + pinmux = <STM32_PINMUX('Z', 0, AF3)>; /* I2C2_SCL */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + i2c2_pins_sleep_b2: i2c2-1 { + pins { + pinmux = <STM32_PINMUX('Z', 0, ANALOG)>; /* I2C2_SCL */ + }; + }; + + i2c4_pins_a: i2c4-0 { + pins { + pinmux = <STM32_PINMUX('Z', 4, AF6)>, /* I2C4_SCL */ + <STM32_PINMUX('Z', 5, AF6)>; /* I2C4_SDA */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + i2c4_pins_sleep_a: i2c4-1 { + pins { + pinmux = <STM32_PINMUX('Z', 4, ANALOG)>, /* I2C4_SCL */ + <STM32_PINMUX('Z', 5, ANALOG)>; /* I2C4_SDA */ + }; + }; + + spi1_pins_a: spi1-0 { + pins1 { + pinmux = <STM32_PINMUX('Z', 0, AF5)>, /* SPI1_SCK */ + <STM32_PINMUX('Z', 2, AF5)>; /* SPI1_MOSI */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + + pins2 { + pinmux = <STM32_PINMUX('Z', 1, AF5)>; /* SPI1_MISO */ + bias-disable; + }; + }; +}; diff --git a/arch/arm/dts/stm32mp157-u-boot.dtsi b/arch/arm/dts/stm32mp15-u-boot.dtsi index 8f9535a4db..8f9535a4db 100644 --- a/arch/arm/dts/stm32mp157-u-boot.dtsi +++ b/arch/arm/dts/stm32mp15-u-boot.dtsi diff --git a/arch/arm/dts/stm32mp157c.dtsi b/arch/arm/dts/stm32mp151.dtsi index 22a9386248..f185639a46 100644 --- a/arch/arm/dts/stm32mp157c.dtsi +++ b/arch/arm/dts/stm32mp151.dtsi @@ -20,12 +20,6 @@ device_type = "cpu"; reg = <0>; }; - - cpu1: cpu@1 { - compatible = "arm,cortex-a7"; - device_type = "cpu"; - reg = <1>; - }; }; psci { @@ -155,6 +149,11 @@ reg = <1>; status = "disabled"; }; + + counter { + compatible = "st,stm32-timer-counter"; + status = "disabled"; + }; }; timers3: timer@40001000 { @@ -184,6 +183,11 @@ reg = <2>; status = "disabled"; }; + + counter { + compatible = "st,stm32-timer-counter"; + status = "disabled"; + }; }; timers4: timer@40002000 { @@ -211,6 +215,11 @@ reg = <3>; status = "disabled"; }; + + counter { + compatible = "st,stm32-timer-counter"; + status = "disabled"; + }; }; timers5: timer@40003000 { @@ -240,6 +249,11 @@ reg = <4>; status = "disabled"; }; + + counter { + compatible = "st,stm32-timer-counter"; + status = "disabled"; + }; }; timers6: timer@40004000 { @@ -596,6 +610,11 @@ reg = <0>; status = "disabled"; }; + + counter { + compatible = "st,stm32-timer-counter"; + status = "disabled"; + }; }; timers8: timer@44001000 { @@ -627,6 +646,11 @@ reg = <7>; status = "disabled"; }; + + counter { + compatible = "st,stm32-timer-counter"; + status = "disabled"; + }; }; usart6: serial@44003000 { @@ -930,33 +954,7 @@ }; }; - m_can1: can@4400e000 { - compatible = "bosch,m_can"; - reg = <0x4400e000 0x400>, <0x44011000 0x1400>; - reg-names = "m_can", "message_ram"; - interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "int0", "int1"; - clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>; - clock-names = "hclk", "cclk"; - bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>; - status = "disabled"; - }; - - m_can2: can@4400f000 { - compatible = "bosch,m_can"; - reg = <0x4400f000 0x400>, <0x44011000 0x2800>; - reg-names = "m_can", "message_ram"; - interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "int0", "int1"; - clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>; - clock-names = "hclk", "cclk"; - bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>; - status = "disabled"; - }; - - dma1: dma@48000000 { + dma1: dma-controller@48000000 { compatible = "st,stm32-dma"; reg = <0x48000000 0x400>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, @@ -973,7 +971,7 @@ dma-requests = <8>; }; - dma2: dma@48001000 { + dma2: dma-controller@48001000 { compatible = "st,stm32-dma"; reg = <0x48001000 0x400>; interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, @@ -1041,8 +1039,8 @@ compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x10153180>; reg = <0x48004000 0x400>; - reg-names = "sdmmc"; - interrupts = <GIC_SPI 137 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cmd_irq"; clocks = <&rcc SDMMC3_K>; clock-names = "apb_pclk"; resets = <&rcc SDMMC3_R>; @@ -1273,15 +1271,6 @@ status = "disabled"; }; - cryp1: cryp@54001000 { - compatible = "st,stm32mp1-cryp"; - reg = <0x54001000 0x400>; - interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&rcc CRYP1>; - resets = <&rcc CRYP1_R>; - status = "disabled"; - }; - hash1: hash@54002000 { compatible = "st,stm32f756-hash"; reg = <0x54002000 0x400>; @@ -1302,7 +1291,7 @@ status = "disabled"; }; - mdma1: dma@58000000 { + mdma1: dma-controller@58000000 { compatible = "st,stm32h7-mdma"; reg = <0x58000000 0x1000>; interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; @@ -1349,20 +1338,22 @@ arm,primecell-periphid = <0x10153180>; reg = <0x58005000 0x1000>; interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "cmd_irq"; + interrupt-names = "cmd_irq"; clocks = <&rcc SDMMC1_K>; clock-names = "apb_pclk"; resets = <&rcc SDMMC1_R>; cap-sd-highspeed; cap-mmc-highspeed; max-frequency = <120000000>; + status = "disabled"; }; sdmmc2: sdmmc@58007000 { compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x10153180>; reg = <0x58007000 0x1000>; - interrupts = <GIC_SPI 124 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cmd_irq"; clocks = <&rcc SDMMC2_K>; clock-names = "apb_pclk"; resets = <&rcc SDMMC2_R>; @@ -1406,6 +1397,7 @@ st,syscon = <&syscfg 0x4>; snps,mixed-burst; snps,pbl = <2>; + snps,en-tx-lpi-clockgating; snps,axi-config = <&stmmac_axi_config_0>; snps,tso; status = "disabled"; @@ -1430,26 +1422,6 @@ status = "disabled"; }; - gpu: gpu@59000000 { - compatible = "vivante,gc"; - reg = <0x59000000 0x800>; - interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&rcc GPU>, <&rcc GPU_K>; - clock-names = "bus" ,"core"; - resets = <&rcc GPU_R>; - status = "disabled"; - }; - - dsi: dsi@5a000000 { - compatible = "st,stm32-dsi"; - reg = <0x5a000000 0x800>; - clocks = <&rcc DSI_K>, <&clk_hse>, <&rcc DSI_PX>; - clock-names = "pclk", "ref", "px_clk"; - resets = <&rcc DSI_R>; - reset-names = "apb"; - status = "disabled"; - }; - ltdc: display-controller@5a001000 { compatible = "st,stm32-ltdc"; reg = <0x5a001000 0x400>; @@ -1535,7 +1507,7 @@ status = "disabled"; }; - bsec: nvmem@5c005000 { + bsec: efuse@5c005000 { compatible = "st,stm32mp15-bsec"; reg = <0x5c005000 0x400>; #address-cells = <1>; @@ -1560,12 +1532,172 @@ #size-cells = <0>; status = "disabled"; }; + + /* + * Break node order to solve dependency probe issue between + * pinctrl and exti. + */ + pinctrl: pin-controller@50002000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,stm32mp157-pinctrl"; + ranges = <0 0x50002000 0xa400>; + interrupt-parent = <&exti>; + st,syscfg = <&exti 0x60 0xff>; + hwlocks = <&hwspinlock 0>; + pins-are-numbered; + + gpioa: gpio@50002000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x0 0x400>; + clocks = <&rcc GPIOA>; + st,bank-name = "GPIOA"; + status = "disabled"; + }; + + gpiob: gpio@50003000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x1000 0x400>; + clocks = <&rcc GPIOB>; + st,bank-name = "GPIOB"; + status = "disabled"; + }; + + gpioc: gpio@50004000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x2000 0x400>; + clocks = <&rcc GPIOC>; + st,bank-name = "GPIOC"; + status = "disabled"; + }; + + gpiod: gpio@50005000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x3000 0x400>; + clocks = <&rcc GPIOD>; + st,bank-name = "GPIOD"; + status = "disabled"; + }; + + gpioe: gpio@50006000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x4000 0x400>; + clocks = <&rcc GPIOE>; + st,bank-name = "GPIOE"; + status = "disabled"; + }; + + gpiof: gpio@50007000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x5000 0x400>; + clocks = <&rcc GPIOF>; + st,bank-name = "GPIOF"; + status = "disabled"; + }; + + gpiog: gpio@50008000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x6000 0x400>; + clocks = <&rcc GPIOG>; + st,bank-name = "GPIOG"; + status = "disabled"; + }; + + gpioh: gpio@50009000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x7000 0x400>; + clocks = <&rcc GPIOH>; + st,bank-name = "GPIOH"; + status = "disabled"; + }; + + gpioi: gpio@5000a000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x8000 0x400>; + clocks = <&rcc GPIOI>; + st,bank-name = "GPIOI"; + status = "disabled"; + }; + + gpioj: gpio@5000b000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x9000 0x400>; + clocks = <&rcc GPIOJ>; + st,bank-name = "GPIOJ"; + status = "disabled"; + }; + + gpiok: gpio@5000c000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0xa000 0x400>; + clocks = <&rcc GPIOK>; + st,bank-name = "GPIOK"; + status = "disabled"; + }; + }; + + pinctrl_z: pin-controller-z@54004000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,stm32mp157-z-pinctrl"; + ranges = <0 0x54004000 0x400>; + pins-are-numbered; + interrupt-parent = <&exti>; + st,syscfg = <&exti 0x60 0xff>; + hwlocks = <&hwspinlock 0>; + + gpioz: gpio@54004000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0 0x400>; + clocks = <&rcc GPIOZ>; + st,bank-name = "GPIOZ"; + st,bank-ioport = <11>; + status = "disabled"; + }; + }; }; - mlahb { - compatible = "simple-bus"; + mlahb: ahb { + compatible = "st,mlahb", "simple-bus"; #address-cells = <1>; #size-cells = <1>; + ranges; dma-ranges = <0x00000000 0x38000000 0x10000>, <0x10000000 0x10000000 0x60000>, <0x30000000 0x30000000 0x60000>; diff --git a/arch/arm/dts/stm32mp153.dtsi b/arch/arm/dts/stm32mp153.dtsi new file mode 100644 index 0000000000..2d759fc601 --- /dev/null +++ b/arch/arm/dts/stm32mp153.dtsi @@ -0,0 +1,45 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2019 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics. + */ + +#include "stm32mp151.dtsi" + +/ { + cpus { + cpu1: cpu@1 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <1>; + }; + }; + + soc { + m_can1: can@4400e000 { + compatible = "bosch,m_can"; + reg = <0x4400e000 0x400>, <0x44011000 0x1400>; + reg-names = "m_can", "message_ram"; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>; + clock-names = "hclk", "cclk"; + bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>; + status = "disabled"; + }; + + m_can2: can@4400f000 { + compatible = "bosch,m_can"; + reg = <0x4400f000 0x400>, <0x44011000 0x2800>; + reg-names = "m_can", "message_ram"; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>; + clock-names = "hclk", "cclk"; + bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/dts/stm32mp157.dtsi b/arch/arm/dts/stm32mp157.dtsi new file mode 100644 index 0000000000..3f0a4a91cc --- /dev/null +++ b/arch/arm/dts/stm32mp157.dtsi @@ -0,0 +1,31 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2019 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics. + */ + +#include "stm32mp153.dtsi" + +/ { + soc { + gpu: gpu@59000000 { + compatible = "vivante,gc"; + reg = <0x59000000 0x800>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc GPU>, <&rcc GPU_K>; + clock-names = "bus" ,"core"; + resets = <&rcc GPU_R>; + status = "disabled"; + }; + + dsi: dsi@5a000000 { + compatible = "st,stm32-dsi"; + reg = <0x5a000000 0x800>; + clocks = <&rcc DSI_K>, <&clk_hse>, <&rcc DSI_PX>; + clock-names = "pclk", "ref", "px_clk"; + resets = <&rcc DSI_R>; + reset-names = "apb"; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/dts/stm32mp157a-avenger96-u-boot.dtsi b/arch/arm/dts/stm32mp157a-avenger96-u-boot.dtsi index 2c7dc509a3..f2ff7a23c5 100644 --- a/arch/arm/dts/stm32mp157a-avenger96-u-boot.dtsi +++ b/arch/arm/dts/stm32mp157a-avenger96-u-boot.dtsi @@ -7,7 +7,7 @@ */ #include <dt-bindings/clock/stm32mp1-clksrc.h> -#include "stm32mp157-u-boot.dtsi" +#include "stm32mp15-u-boot.dtsi" #include "stm32mp15-ddr3-2x4Gb-1066-binG.dtsi" / { @@ -145,7 +145,10 @@ &sdmmc1_b4_pins_a { u-boot,dm-spl; - pins { + pins1 { + u-boot,dm-spl; + }; + pins2 { u-boot,dm-spl; }; }; @@ -199,7 +202,3 @@ u-boot,force-b-session-valid; hnp-srp-disable; }; - -&v3v3 { - regulator-always-on; -}; diff --git a/arch/arm/dts/stm32mp157a-avenger96.dts b/arch/arm/dts/stm32mp157a-avenger96.dts index 1f32395e71..80ee9c0a2c 100644 --- a/arch/arm/dts/stm32mp157a-avenger96.dts +++ b/arch/arm/dts/stm32mp157a-avenger96.dts @@ -6,8 +6,10 @@ /dts-v1/; -#include "stm32mp157c.dtsi" -#include "stm32mp157xac-pinctrl.dtsi" +#include "stm32mp157.dtsi" +#include "stm32mp15-pinctrl.dtsi" +#include "stm32mp157-pinctrl.dtsi" +#include "stm32mp15xxac-pinctrl.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/mfd/st,stpmic1.h> diff --git a/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi b/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi index a5cc01dd19..5844d41c53 100644 --- a/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi +++ b/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi @@ -4,7 +4,7 @@ */ #include <dt-bindings/clock/stm32mp1-clksrc.h> -#include "stm32mp157-u-boot.dtsi" +#include "stm32mp15-u-boot.dtsi" #include "stm32mp15-ddr3-1x4Gb-1066-binG.dtsi" / { @@ -164,7 +164,10 @@ &sdmmc1_b4_pins_a { u-boot,dm-spl; - pins { + pins1 { + u-boot,dm-spl; + }; + pins2 { u-boot,dm-spl; }; }; diff --git a/arch/arm/dts/stm32mp157a-dk1.dts b/arch/arm/dts/stm32mp157a-dk1.dts index 624bf6954b..d03d4cd260 100644 --- a/arch/arm/dts/stm32mp157a-dk1.dts +++ b/arch/arm/dts/stm32mp157a-dk1.dts @@ -6,10 +6,10 @@ /dts-v1/; -#include "stm32mp157c.dtsi" -#include "stm32mp157xac-pinctrl.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/mfd/st,stpmic1.h> +#include "stm32mp157.dtsi" +#include "stm32mp15-pinctrl.dtsi" +#include "stm32mp15xxac-pinctrl.dtsi" +#include "stm32mp15xx-dkx.dtsi" / { model = "STMicroelectronics STM32MP157A-DK1 Discovery Board"; @@ -23,537 +23,4 @@ chosen { stdout-path = "serial0:115200n8"; }; - - memory@c0000000 { - device_type = "memory"; - reg = <0xc0000000 0x20000000>; - }; - - reserved-memory { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - mcuram2: mcuram2@10000000 { - compatible = "shared-dma-pool"; - reg = <0x10000000 0x40000>; - no-map; - }; - - vdev0vring0: vdev0vring0@10040000 { - compatible = "shared-dma-pool"; - reg = <0x10040000 0x1000>; - no-map; - }; - - vdev0vring1: vdev0vring1@10041000 { - compatible = "shared-dma-pool"; - reg = <0x10041000 0x1000>; - no-map; - }; - - vdev0buffer: vdev0buffer@10042000 { - compatible = "shared-dma-pool"; - reg = <0x10042000 0x4000>; - no-map; - }; - - mcuram: mcuram@30000000 { - compatible = "shared-dma-pool"; - reg = <0x30000000 0x40000>; - no-map; - }; - - retram: retram@38000000 { - compatible = "shared-dma-pool"; - reg = <0x38000000 0x10000>; - no-map; - }; - - gpu_reserved: gpu@d4000000 { - reg = <0xd4000000 0x4000000>; - no-map; - }; - }; - - led { - compatible = "gpio-leds"; - blue { - label = "heartbeat"; - gpios = <&gpiod 11 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - default-state = "off"; - }; - }; - - sound { - compatible = "audio-graph-card"; - label = "STM32MP1-DK"; - routing = - "Playback" , "MCLK", - "Capture" , "MCLK", - "MICL" , "Mic Bias"; - dais = <&sai2a_port &sai2b_port &i2s2_port>; - status = "okay"; - }; -}; - -&adc { - pinctrl-names = "default"; - pinctrl-0 = <&adc12_ain_pins_a>, <&adc12_usb_cc_pins_a>; - vdd-supply = <&vdd>; - vdda-supply = <&vdd>; - vref-supply = <&vrefbuf>; - status = "disabled"; - adc1: adc@0 { - /* - * Type-C USB_PWR_CC1 & USB_PWR_CC2 on in18 & in19. - * Use at least 5 * RC time, e.g. 5 * (Rp + Rd) * C: - * 5 * (56 + 47kOhms) * 5pF => 2.5us. - * Use arbitrary margin here (e.g. 5us). - */ - st,min-sample-time-nsecs = <5000>; - /* AIN connector, USB Type-C CC1 & CC2 */ - st,adc-channels = <0 1 6 13 18 19>; - status = "okay"; - }; - adc2: adc@100 { - /* AIN connector, USB Type-C CC1 & CC2 */ - st,adc-channels = <0 1 2 6 18 19>; - st,min-sample-time-nsecs = <5000>; - status = "okay"; - }; -}; - -&cec { - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&cec_pins_b>; - pinctrl-1 = <&cec_pins_sleep_b>; - status = "okay"; -}; - -ðernet0 { - status = "okay"; - pinctrl-0 = <ðernet0_rgmii_pins_a>; - pinctrl-1 = <ðernet0_rgmii_pins_sleep_a>; - pinctrl-names = "default", "sleep"; - phy-mode = "rgmii-id"; - max-speed = <1000>; - phy-handle = <&phy0>; - - mdio0 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "snps,dwmac-mdio"; - phy0: ethernet-phy@0 { - reg = <0>; - }; - }; -}; - -&gpu { - contiguous-area = <&gpu_reserved>; - status = "okay"; -}; - -&i2c1 { - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&i2c1_pins_a>; - pinctrl-1 = <&i2c1_pins_sleep_a>; - i2c-scl-rising-time-ns = <100>; - i2c-scl-falling-time-ns = <7>; - status = "okay"; - /delete-property/dmas; - /delete-property/dma-names; - - hdmi-transmitter@39 { - compatible = "sil,sii9022"; - reg = <0x39>; - iovcc-supply = <&v3v3_hdmi>; - cvcc12-supply = <&v1v2_hdmi>; - reset-gpios = <&gpioa 10 GPIO_ACTIVE_LOW>; - interrupts = <1 IRQ_TYPE_EDGE_FALLING>; - interrupt-parent = <&gpiog>; - #sound-dai-cells = <0>; - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - sii9022_in: endpoint { - remote-endpoint = <<dc_ep0_out>; - }; - }; - - port@3 { - reg = <3>; - sii9022_tx_endpoint: endpoint { - remote-endpoint = <&i2s2_endpoint>; - }; - }; - }; - }; - - cs42l51: cs42l51@4a { - compatible = "cirrus,cs42l51"; - reg = <0x4a>; - #sound-dai-cells = <0>; - VL-supply = <&v3v3>; - VD-supply = <&v1v8_audio>; - VA-supply = <&v1v8_audio>; - VAHP-supply = <&v1v8_audio>; - reset-gpios = <&gpiog 9 GPIO_ACTIVE_LOW>; - clocks = <&sai2a>; - clock-names = "MCLK"; - status = "okay"; - - cs42l51_port: port { - #address-cells = <1>; - #size-cells = <0>; - - cs42l51_tx_endpoint: endpoint@0 { - reg = <0>; - remote-endpoint = <&sai2a_endpoint>; - frame-master; - bitclock-master; - }; - - cs42l51_rx_endpoint: endpoint@1 { - reg = <1>; - remote-endpoint = <&sai2b_endpoint>; - frame-master; - bitclock-master; - }; - }; - }; -}; - -&i2c4 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c4_pins_a>; - i2c-scl-rising-time-ns = <185>; - i2c-scl-falling-time-ns = <20>; - status = "okay"; - /* spare dmas for other usage */ - /delete-property/dmas; - /delete-property/dma-names; - - typec: stusb1600@28 { - compatible = "st,stusb1600"; - reg = <0x28>; - interrupts = <11 IRQ_TYPE_EDGE_FALLING>; - interrupt-parent = <&gpioi>; - pinctrl-names = "default"; - pinctrl-0 = <&stusb1600_pins_a>; - - status = "okay"; - - typec_con: connector { - compatible = "usb-c-connector"; - label = "USB-C"; - power-role = "sink"; - power-opmode = "default"; - }; - }; - - pmic: stpmic@33 { - compatible = "st,stpmic1"; - reg = <0x33>; - interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>; - interrupt-controller; - #interrupt-cells = <2>; - status = "okay"; - - regulators { - compatible = "st,stpmic1-regulators"; - ldo1-supply = <&v3v3>; - ldo3-supply = <&vdd_ddr>; - ldo6-supply = <&v3v3>; - pwr_sw1-supply = <&bst_out>; - pwr_sw2-supply = <&bst_out>; - - vddcore: buck1 { - regulator-name = "vddcore"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-initial-mode = <0>; - regulator-over-current-protection; - }; - - vdd_ddr: buck2 { - regulator-name = "vdd_ddr"; - regulator-min-microvolt = <1350000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-initial-mode = <0>; - regulator-over-current-protection; - }; - - vdd: buck3 { - regulator-name = "vdd"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - st,mask-reset; - regulator-initial-mode = <0>; - regulator-over-current-protection; - }; - - v3v3: buck4 { - regulator-name = "v3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-over-current-protection; - regulator-initial-mode = <0>; - }; - - v1v8_audio: ldo1 { - regulator-name = "v1v8_audio"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - interrupts = <IT_CURLIM_LDO1 0>; - }; - - v3v3_hdmi: ldo2 { - regulator-name = "v3v3_hdmi"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - interrupts = <IT_CURLIM_LDO2 0>; - }; - - vtt_ddr: ldo3 { - regulator-name = "vtt_ddr"; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <750000>; - regulator-always-on; - regulator-over-current-protection; - }; - - vdd_usb: ldo4 { - regulator-name = "vdd_usb"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - interrupts = <IT_CURLIM_LDO4 0>; - }; - - vdda: ldo5 { - regulator-name = "vdda"; - regulator-min-microvolt = <2900000>; - regulator-max-microvolt = <2900000>; - interrupts = <IT_CURLIM_LDO5 0>; - regulator-boot-on; - }; - - v1v2_hdmi: ldo6 { - regulator-name = "v1v2_hdmi"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - interrupts = <IT_CURLIM_LDO6 0>; - }; - - vref_ddr: vref_ddr { - regulator-name = "vref_ddr"; - regulator-always-on; - regulator-over-current-protection; - }; - - bst_out: boost { - regulator-name = "bst_out"; - interrupts = <IT_OCP_BOOST 0>; - }; - - vbus_otg: pwr_sw1 { - regulator-name = "vbus_otg"; - interrupts = <IT_OCP_OTG 0>; - }; - - vbus_sw: pwr_sw2 { - regulator-name = "vbus_sw"; - interrupts = <IT_OCP_SWOUT 0>; - regulator-active-discharge = <1>; - }; - }; - - onkey { - compatible = "st,stpmic1-onkey"; - interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 0>; - interrupt-names = "onkey-falling", "onkey-rising"; - power-off-time-sec = <10>; - status = "okay"; - }; - - watchdog { - compatible = "st,stpmic1-wdt"; - status = "disabled"; - }; - }; -}; - -&i2s2 { - clocks = <&rcc SPI2>, <&rcc SPI2_K>, <&rcc PLL3_Q>, <&rcc PLL3_R>; - clock-names = "pclk", "i2sclk", "x8k", "x11k"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&i2s2_pins_a>; - pinctrl-1 = <&i2s2_pins_sleep_a>; - status = "okay"; - - i2s2_port: port { - i2s2_endpoint: endpoint { - remote-endpoint = <&sii9022_tx_endpoint>; - format = "i2s"; - mclk-fs = <256>; - }; - }; -}; - -&ipcc { - status = "okay"; -}; - -&iwdg2 { - timeout-sec = <32>; - status = "okay"; -}; - -<dc { - pinctrl-names = "default", "sleep"; - pinctrl-0 = <<dc_pins_a>; - pinctrl-1 = <<dc_pins_sleep_a>; - status = "okay"; - - port { - #address-cells = <1>; - #size-cells = <0>; - - ltdc_ep0_out: endpoint@0 { - reg = <0>; - remote-endpoint = <&sii9022_in>; - }; - }; -}; - -&m4_rproc { - memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>, - <&vdev0vring1>, <&vdev0buffer>; - mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>; - mbox-names = "vq0", "vq1", "shutdown"; - interrupt-parent = <&exti>; - interrupts = <68 1>; - status = "okay"; -}; - -&pwr_regulators { - vdd-supply = <&vdd>; - vdd_3v3_usbfs-supply = <&vdd_usb>; -}; - -&rng1 { - status = "okay"; -}; - -&rtc { - status = "okay"; -}; - -&sai2 { - clocks = <&rcc SAI2>, <&rcc PLL3_Q>, <&rcc PLL3_R>; - clock-names = "pclk", "x8k", "x11k"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sai2a_pins_a>, <&sai2b_pins_b>; - pinctrl-1 = <&sai2a_sleep_pins_a>, <&sai2b_sleep_pins_b>; - status = "okay"; - - sai2a: audio-controller@4400b004 { - #clock-cells = <0>; - dma-names = "tx"; - clocks = <&rcc SAI2_K>; - clock-names = "sai_ck"; - status = "okay"; - - sai2a_port: port { - sai2a_endpoint: endpoint { - remote-endpoint = <&cs42l51_tx_endpoint>; - format = "i2s"; - mclk-fs = <256>; - dai-tdm-slot-num = <2>; - dai-tdm-slot-width = <32>; - }; - }; - }; - - sai2b: audio-controller@4400b024 { - dma-names = "rx"; - st,sync = <&sai2a 2>; - clocks = <&rcc SAI2_K>, <&sai2a>; - clock-names = "sai_ck", "MCLK"; - status = "okay"; - - sai2b_port: port { - sai2b_endpoint: endpoint { - remote-endpoint = <&cs42l51_rx_endpoint>; - format = "i2s"; - mclk-fs = <256>; - dai-tdm-slot-num = <2>; - dai-tdm-slot-width = <32>; - }; - }; - }; -}; - -&sdmmc1 { - pinctrl-names = "default", "opendrain", "sleep"; - pinctrl-0 = <&sdmmc1_b4_pins_a>; - pinctrl-1 = <&sdmmc1_b4_od_pins_a>; - pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>; - broken-cd; - st,neg-edge; - bus-width = <4>; - vmmc-supply = <&v3v3>; - status = "okay"; -}; - -&uart4 { - pinctrl-names = "default"; - pinctrl-0 = <&uart4_pins_a>; - status = "okay"; -}; - -&usbh_ehci { - phys = <&usbphyc_port0>; - phy-names = "usb"; - status = "okay"; -}; - -&usbotg_hs { - dr_mode = "peripheral"; - phys = <&usbphyc_port1 0>; - phy-names = "usb2-phy"; - status = "okay"; -}; - -&usbphyc { - status = "okay"; -}; - -&usbphyc_port0 { - phy-supply = <&vdd_usb>; -}; - -&usbphyc_port1 { - phy-supply = <&vdd_usb>; -}; - -&vrefbuf { - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - vdda-supply = <&vdd>; - status = "okay"; }; diff --git a/arch/arm/dts/stm32mp157c-dk2-u-boot.dtsi b/arch/arm/dts/stm32mp157c-dk2-u-boot.dtsi index 18ac1e3cb2..06ef3a4095 100644 --- a/arch/arm/dts/stm32mp157c-dk2-u-boot.dtsi +++ b/arch/arm/dts/stm32mp157c-dk2-u-boot.dtsi @@ -4,9 +4,3 @@ */ #include "stm32mp157a-dk1-u-boot.dtsi" - -&i2c1 { - hdmi-transmitter@39 { - reset-gpios = <&gpioa 10 GPIO_ACTIVE_LOW>; - }; -}; diff --git a/arch/arm/dts/stm32mp157c-dk2.dts b/arch/arm/dts/stm32mp157c-dk2.dts index d26adcbeba..7985b80967 100644 --- a/arch/arm/dts/stm32mp157c-dk2.dts +++ b/arch/arm/dts/stm32mp157c-dk2.dts @@ -6,11 +6,24 @@ /dts-v1/; -#include "stm32mp157a-dk1.dts" +#include "stm32mp157.dtsi" +#include "stm32mp15xc.dtsi" +#include "stm32mp15-pinctrl.dtsi" +#include "stm32mp15xxac-pinctrl.dtsi" +#include "stm32mp15xx-dkx.dtsi" / { model = "STMicroelectronics STM32MP157C-DK2 Discovery Board"; compatible = "st,stm32mp157c-dk2", "st,stm32mp157"; + + aliases { + ethernet0 = ðernet0; + serial0 = &uart4; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; }; &dsi { diff --git a/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi b/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi index 347edf7e58..ed2f024be9 100644 --- a/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi +++ b/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi @@ -4,7 +4,7 @@ */ #include <dt-bindings/clock/stm32mp1-clksrc.h> -#include "stm32mp157-u-boot.dtsi" +#include "stm32mp15-u-boot.dtsi" #include "stm32mp15-ddr3-2x4Gb-1066-binG.dtsi" / { @@ -161,7 +161,10 @@ &sdmmc1_b4_pins_a { u-boot,dm-spl; - pins { + pins1 { + u-boot,dm-spl; + }; + pins2 { u-boot,dm-spl; }; }; diff --git a/arch/arm/dts/stm32mp157c-ed1.dts b/arch/arm/dts/stm32mp157c-ed1.dts index ae4da39ce8..54af7c97b3 100644 --- a/arch/arm/dts/stm32mp157c-ed1.dts +++ b/arch/arm/dts/stm32mp157c-ed1.dts @@ -5,8 +5,10 @@ */ /dts-v1/; -#include "stm32mp157c.dtsi" -#include "stm32mp157xaa-pinctrl.dtsi" +#include "stm32mp157.dtsi" +#include "stm32mp15xc.dtsi" +#include "stm32mp15-pinctrl.dtsi" +#include "stm32mp15xxaa-pinctrl.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/mfd/st,stpmic1.h> @@ -89,6 +91,22 @@ }; }; +&adc { + /* ANA0, ANA1 are dedicated pins and don't need pinctrl: only in6. */ + pinctrl-0 = <&adc1_in6_pins_a>; + pinctrl-names = "default"; + vdd-supply = <&vdd>; + vdda-supply = <&vdda>; + vref-supply = <&vdda>; + status = "disabled"; + adc1: adc@0 { + st,adc-channels = <0 1 6>; + /* 16.5 ck_cycles sampling time */ + st,min-sample-time-nsecs = <400>; + status = "okay"; + }; +}; + &dac { pinctrl-names = "default"; pinctrl-0 = <&dac_ch1_pins_a &dac_ch2_pins_a>; diff --git a/arch/arm/dts/stm32mp157c-ev1.dts b/arch/arm/dts/stm32mp157c-ev1.dts index bd8ffc185f..228e35e168 100644 --- a/arch/arm/dts/stm32mp157c-ev1.dts +++ b/arch/arm/dts/stm32mp157c-ev1.dts @@ -182,8 +182,6 @@ ov5640: camera@3c { compatible = "ovti,ov5640"; - pinctrl-names = "default"; - pinctrl-0 = <&ov5640_pins>; reg = <0x3c>; clocks = <&clk_ext_camera>; clock-names = "xclk"; @@ -224,12 +222,6 @@ pins = "gpio0", "gpio1", "gpio2", "gpio3", "gpio4"; bias-pull-down; }; - - ov5640_pins: camera { - pins = "agpio2", "agpio3"; /* stmfx pins 18 & 19 */ - drive-push-pull; - output-low; - }; }; }; }; @@ -291,6 +283,18 @@ }; }; +&sdmmc3 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc3_b4_pins_a>; + pinctrl-1 = <&sdmmc3_b4_od_pins_a>; + pinctrl-2 = <&sdmmc3_b4_sleep_pins_a>; + broken-cd; + st,neg-edge; + bus-width = <4>; + vmmc-supply = <&v3v3>; + status = "disabled"; +}; + &spi1 { pinctrl-names = "default"; pinctrl-0 = <&spi1_pins_a>; @@ -304,7 +308,8 @@ status = "disabled"; pwm { pinctrl-0 = <&pwm2_pins_a>; - pinctrl-names = "default"; + pinctrl-1 = <&pwm2_sleep_pins_a>; + pinctrl-names = "default", "sleep"; status = "okay"; }; timer@1 { @@ -318,7 +323,8 @@ status = "disabled"; pwm { pinctrl-0 = <&pwm8_pins_a>; - pinctrl-names = "default"; + pinctrl-1 = <&pwm8_sleep_pins_a>; + pinctrl-names = "default", "sleep"; status = "okay"; }; timer@7 { @@ -332,7 +338,8 @@ status = "disabled"; pwm { pinctrl-0 = <&pwm12_pins_a>; - pinctrl-names = "default"; + pinctrl-1 = <&pwm12_sleep_pins_a>; + pinctrl-names = "default", "sleep"; status = "okay"; }; timer@11 { @@ -348,6 +355,7 @@ &usbotg_hs { dr_mode = "peripheral"; phys = <&usbphyc_port1 0>; + phy-names = "usb2-phy"; status = "okay"; }; diff --git a/arch/arm/dts/stm32mp157xaa-pinctrl.dtsi b/arch/arm/dts/stm32mp157xaa-pinctrl.dtsi deleted file mode 100644 index 875adf5e1e..0000000000 --- a/arch/arm/dts/stm32mp157xaa-pinctrl.dtsi +++ /dev/null @@ -1,90 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) -/* - * Copyright (C) STMicroelectronics 2019 - All Rights Reserved - * Author: Alexandre Torgue <alexandre.torgue@st.com> - */ - -#include "stm32mp157-pinctrl.dtsi" -/ { - soc { - pinctrl: pin-controller@50002000 { - st,package = <STM32MP_PKG_AA>; - - gpioa: gpio@50002000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 0 16>; - }; - - gpiob: gpio@50003000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 16 16>; - }; - - gpioc: gpio@50004000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 32 16>; - }; - - gpiod: gpio@50005000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 48 16>; - }; - - gpioe: gpio@50006000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 64 16>; - }; - - gpiof: gpio@50007000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 80 16>; - }; - - gpiog: gpio@50008000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 96 16>; - }; - - gpioh: gpio@50009000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 112 16>; - }; - - gpioi: gpio@5000a000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 128 16>; - }; - - gpioj: gpio@5000b000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 144 16>; - }; - - gpiok: gpio@5000c000 { - status = "okay"; - ngpios = <8>; - gpio-ranges = <&pinctrl 0 160 8>; - }; - }; - - pinctrl_z: pin-controller-z@54004000 { - st,package = <STM32MP_PKG_AA>; - - gpioz: gpio@54004000 { - status = "okay"; - ngpios = <8>; - gpio-ranges = <&pinctrl_z 0 400 8>; - }; - }; - }; -}; diff --git a/arch/arm/dts/stm32mp157xab-pinctrl.dtsi b/arch/arm/dts/stm32mp157xab-pinctrl.dtsi deleted file mode 100644 index 961fa12a59..0000000000 --- a/arch/arm/dts/stm32mp157xab-pinctrl.dtsi +++ /dev/null @@ -1,62 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) -/* - * Copyright (C) STMicroelectronics 2019 - All Rights Reserved - * Author: Alexandre Torgue <alexandre.torgue@st.com> - */ - -#include "stm32mp157-pinctrl.dtsi" -/ { - soc { - pinctrl: pin-controller@50002000 { - st,package = <STM32MP_PKG_AB>; - - gpioa: gpio@50002000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 0 16>; - }; - - gpiob: gpio@50003000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 16 16>; - }; - - gpioc: gpio@50004000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 32 16>; - }; - - gpiod: gpio@50005000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 48 16>; - }; - - gpioe: gpio@50006000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 64 16>; - }; - - gpiof: gpio@50007000 { - status = "okay"; - ngpios = <6>; - gpio-ranges = <&pinctrl 6 86 6>; - }; - - gpiog: gpio@50008000 { - status = "okay"; - ngpios = <10>; - gpio-ranges = <&pinctrl 6 102 10>; - }; - - gpioh: gpio@50009000 { - status = "okay"; - ngpios = <2>; - gpio-ranges = <&pinctrl 0 112 2>; - }; - }; - }; -}; diff --git a/arch/arm/dts/stm32mp157xac-pinctrl.dtsi b/arch/arm/dts/stm32mp157xac-pinctrl.dtsi deleted file mode 100644 index 26600f188d..0000000000 --- a/arch/arm/dts/stm32mp157xac-pinctrl.dtsi +++ /dev/null @@ -1,78 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) -/* - * Copyright (C) STMicroelectronics 2019 - All Rights Reserved - * Author: Alexandre Torgue <alexandre.torgue@st.com> - */ - -#include "stm32mp157-pinctrl.dtsi" -/ { - soc { - pinctrl: pin-controller@50002000 { - st,package = <STM32MP_PKG_AC>; - - gpioa: gpio@50002000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 0 16>; - }; - - gpiob: gpio@50003000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 16 16>; - }; - - gpioc: gpio@50004000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 32 16>; - }; - - gpiod: gpio@50005000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 48 16>; - }; - - gpioe: gpio@50006000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 64 16>; - }; - - gpiof: gpio@50007000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 80 16>; - }; - - gpiog: gpio@50008000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 96 16>; - }; - - gpioh: gpio@50009000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 112 16>; - }; - - gpioi: gpio@5000a000 { - status = "okay"; - ngpios = <12>; - gpio-ranges = <&pinctrl 0 128 12>; - }; - }; - - pinctrl_z: pin-controller-z@54004000 { - st,package = <STM32MP_PKG_AC>; - - gpioz: gpio@54004000 { - status = "okay"; - ngpios = <8>; - gpio-ranges = <&pinctrl_z 0 400 8>; - }; - }; - }; -}; diff --git a/arch/arm/dts/stm32mp157xad-pinctrl.dtsi b/arch/arm/dts/stm32mp157xad-pinctrl.dtsi deleted file mode 100644 index 910113f3e6..0000000000 --- a/arch/arm/dts/stm32mp157xad-pinctrl.dtsi +++ /dev/null @@ -1,62 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) -/* - * Copyright (C) STMicroelectronics 2019 - All Rights Reserved - * Author: Alexandre Torgue <alexandre.torgue@st.com> - */ - -#include "stm32mp157-pinctrl.dtsi" -/ { - soc { - pinctrl: pin-controller@50002000 { - st,package = <STM32MP_PKG_AD>; - - gpioa: gpio@50002000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 0 16>; - }; - - gpiob: gpio@50003000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 16 16>; - }; - - gpioc: gpio@50004000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 32 16>; - }; - - gpiod: gpio@50005000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 48 16>; - }; - - gpioe: gpio@50006000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 64 16>; - }; - - gpiof: gpio@50007000 { - status = "okay"; - ngpios = <6>; - gpio-ranges = <&pinctrl 6 86 6>; - }; - - gpiog: gpio@50008000 { - status = "okay"; - ngpios = <10>; - gpio-ranges = <&pinctrl 6 102 10>; - }; - - gpioh: gpio@50009000 { - status = "okay"; - ngpios = <2>; - gpio-ranges = <&pinctrl 0 112 2>; - }; - }; - }; -}; diff --git a/arch/arm/dts/stm32mp15xc.dtsi b/arch/arm/dts/stm32mp15xc.dtsi new file mode 100644 index 0000000000..b06a55a2fa --- /dev/null +++ b/arch/arm/dts/stm32mp15xc.dtsi @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2019 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics. + */ + +/ { + soc { + cryp1: cryp@54001000 { + compatible = "st,stm32mp1-cryp"; + reg = <0x54001000 0x400>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc CRYP1>; + resets = <&rcc CRYP1_R>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi b/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi index 6c952a57ee..62c45def43 100644 --- a/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi +++ b/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi @@ -4,7 +4,7 @@ */ #include <dt-bindings/clock/stm32mp1-clksrc.h> -#include "stm32mp157-u-boot.dtsi" +#include "stm32mp15-u-boot.dtsi" #include "stm32mp15-ddr3-2x4Gb-1066-binG.dtsi" / { @@ -196,7 +196,10 @@ &sdmmc1_b4_pins_a { u-boot,dm-spl; - pins { + pins1 { + u-boot,dm-spl; + }; + pins2 { u-boot,dm-spl; }; }; diff --git a/arch/arm/dts/stm32mp15xx-dhcom.dtsi b/arch/arm/dts/stm32mp15xx-dhcom.dtsi index e5be0a79ac..d8a255b9c6 100644 --- a/arch/arm/dts/stm32mp15xx-dhcom.dtsi +++ b/arch/arm/dts/stm32mp15xx-dhcom.dtsi @@ -4,8 +4,10 @@ */ /dts-v1/; -#include "stm32mp157c.dtsi" -#include "stm32mp157xaa-pinctrl.dtsi" +#include "stm32mp157.dtsi" +#include "stm32mp15xc.dtsi" +#include "stm32mp15-pinctrl.dtsi" +#include "stm32mp15xxaa-pinctrl.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/mfd/st,stpmic1.h> diff --git a/arch/arm/dts/stm32mp15xx-dkx.dtsi b/arch/arm/dts/stm32mp15xx-dkx.dtsi new file mode 100644 index 0000000000..42d3f0cb2d --- /dev/null +++ b/arch/arm/dts/stm32mp15xx-dkx.dtsi @@ -0,0 +1,639 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2019 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/mfd/st,stpmic1.h> + +/ { + memory@c0000000 { + device_type = "memory"; + reg = <0xc0000000 0x20000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mcuram2: mcuram2@10000000 { + compatible = "shared-dma-pool"; + reg = <0x10000000 0x40000>; + no-map; + }; + + vdev0vring0: vdev0vring0@10040000 { + compatible = "shared-dma-pool"; + reg = <0x10040000 0x1000>; + no-map; + }; + + vdev0vring1: vdev0vring1@10041000 { + compatible = "shared-dma-pool"; + reg = <0x10041000 0x1000>; + no-map; + }; + + vdev0buffer: vdev0buffer@10042000 { + compatible = "shared-dma-pool"; + reg = <0x10042000 0x4000>; + no-map; + }; + + mcuram: mcuram@30000000 { + compatible = "shared-dma-pool"; + reg = <0x30000000 0x40000>; + no-map; + }; + + retram: retram@38000000 { + compatible = "shared-dma-pool"; + reg = <0x38000000 0x10000>; + no-map; + }; + + gpu_reserved: gpu@d4000000 { + reg = <0xd4000000 0x4000000>; + no-map; + }; + }; + + led { + compatible = "gpio-leds"; + blue { + label = "heartbeat"; + gpios = <&gpiod 11 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + }; + + sound { + compatible = "audio-graph-card"; + label = "STM32MP1-DK"; + routing = + "Playback" , "MCLK", + "Capture" , "MCLK", + "MICL" , "Mic Bias"; + dais = <&sai2a_port &sai2b_port &i2s2_port>; + status = "okay"; + }; +}; + +&adc { + pinctrl-names = "default"; + pinctrl-0 = <&adc12_ain_pins_a>, <&adc12_usb_cc_pins_a>; + vdd-supply = <&vdd>; + vdda-supply = <&vdd>; + vref-supply = <&vrefbuf>; + status = "disabled"; + adc1: adc@0 { + /* + * Type-C USB_PWR_CC1 & USB_PWR_CC2 on in18 & in19. + * Use at least 5 * RC time, e.g. 5 * (Rp + Rd) * C: + * 5 * (56 + 47kOhms) * 5pF => 2.5us. + * Use arbitrary margin here (e.g. 5us). + */ + st,min-sample-time-nsecs = <5000>; + /* AIN connector, USB Type-C CC1 & CC2 */ + st,adc-channels = <0 1 6 13 18 19>; + status = "okay"; + }; + adc2: adc@100 { + /* AIN connector, USB Type-C CC1 & CC2 */ + st,adc-channels = <0 1 2 6 18 19>; + st,min-sample-time-nsecs = <5000>; + status = "okay"; + }; +}; + +&cec { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cec_pins_b>; + pinctrl-1 = <&cec_pins_sleep_b>; + status = "okay"; +}; + +ðernet0 { + status = "okay"; + pinctrl-0 = <ðernet0_rgmii_pins_a>; + pinctrl-1 = <ðernet0_rgmii_pins_sleep_a>; + pinctrl-names = "default", "sleep"; + phy-mode = "rgmii-id"; + max-speed = <1000>; + phy-handle = <&phy0>; + + mdio0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; +}; + +&gpu { + contiguous-area = <&gpu_reserved>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c1_pins_a>; + pinctrl-1 = <&i2c1_pins_sleep_a>; + i2c-scl-rising-time-ns = <100>; + i2c-scl-falling-time-ns = <7>; + status = "okay"; + /delete-property/dmas; + /delete-property/dma-names; + + hdmi-transmitter@39 { + compatible = "sil,sii9022"; + reg = <0x39>; + iovcc-supply = <&v3v3_hdmi>; + cvcc12-supply = <&v1v2_hdmi>; + reset-gpios = <&gpioa 10 GPIO_ACTIVE_LOW>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + interrupt-parent = <&gpiog>; + #sound-dai-cells = <0>; + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + sii9022_in: endpoint { + remote-endpoint = <<dc_ep0_out>; + }; + }; + + port@3 { + reg = <3>; + sii9022_tx_endpoint: endpoint { + remote-endpoint = <&i2s2_endpoint>; + }; + }; + }; + }; + + cs42l51: cs42l51@4a { + compatible = "cirrus,cs42l51"; + reg = <0x4a>; + #sound-dai-cells = <0>; + VL-supply = <&v3v3>; + VD-supply = <&v1v8_audio>; + VA-supply = <&v1v8_audio>; + VAHP-supply = <&v1v8_audio>; + reset-gpios = <&gpiog 9 GPIO_ACTIVE_LOW>; + clocks = <&sai2a>; + clock-names = "MCLK"; + status = "okay"; + + cs42l51_port: port { + #address-cells = <1>; + #size-cells = <0>; + + cs42l51_tx_endpoint: endpoint@0 { + reg = <0>; + remote-endpoint = <&sai2a_endpoint>; + frame-master; + bitclock-master; + }; + + cs42l51_rx_endpoint: endpoint@1 { + reg = <1>; + remote-endpoint = <&sai2b_endpoint>; + frame-master; + bitclock-master; + }; + }; + }; +}; + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_pins_a>; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; + /* spare dmas for other usage */ + /delete-property/dmas; + /delete-property/dma-names; + + typec: stusb1600@28 { + compatible = "st,stusb1600"; + reg = <0x28>; + interrupts = <11 IRQ_TYPE_EDGE_FALLING>; + interrupt-parent = <&gpioi>; + pinctrl-names = "default"; + pinctrl-0 = <&stusb1600_pins_a>; + + status = "okay"; + + typec_con: connector { + compatible = "usb-c-connector"; + label = "USB-C"; + power-role = "sink"; + power-opmode = "default"; + }; + }; + + pmic: stpmic@33 { + compatible = "st,stpmic1"; + reg = <0x33>; + interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + status = "okay"; + + regulators { + compatible = "st,stpmic1-regulators"; + ldo1-supply = <&v3v3>; + ldo3-supply = <&vdd_ddr>; + ldo6-supply = <&v3v3>; + pwr_sw1-supply = <&bst_out>; + pwr_sw2-supply = <&bst_out>; + + vddcore: buck1 { + regulator-name = "vddcore"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + vdd_ddr: buck2 { + regulator-name = "vdd_ddr"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + vdd: buck3 { + regulator-name = "vdd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + st,mask-reset; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + v3v3: buck4 { + regulator-name = "v3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-over-current-protection; + regulator-initial-mode = <0>; + }; + + v1v8_audio: ldo1 { + regulator-name = "v1v8_audio"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + interrupts = <IT_CURLIM_LDO1 0>; + }; + + v3v3_hdmi: ldo2 { + regulator-name = "v3v3_hdmi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + interrupts = <IT_CURLIM_LDO2 0>; + }; + + vtt_ddr: ldo3 { + regulator-name = "vtt_ddr"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <750000>; + regulator-always-on; + regulator-over-current-protection; + }; + + vdd_usb: ldo4 { + regulator-name = "vdd_usb"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + interrupts = <IT_CURLIM_LDO4 0>; + }; + + vdda: ldo5 { + regulator-name = "vdda"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + interrupts = <IT_CURLIM_LDO5 0>; + regulator-boot-on; + }; + + v1v2_hdmi: ldo6 { + regulator-name = "v1v2_hdmi"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + interrupts = <IT_CURLIM_LDO6 0>; + }; + + vref_ddr: vref_ddr { + regulator-name = "vref_ddr"; + regulator-always-on; + regulator-over-current-protection; + }; + + bst_out: boost { + regulator-name = "bst_out"; + interrupts = <IT_OCP_BOOST 0>; + }; + + vbus_otg: pwr_sw1 { + regulator-name = "vbus_otg"; + interrupts = <IT_OCP_OTG 0>; + }; + + vbus_sw: pwr_sw2 { + regulator-name = "vbus_sw"; + interrupts = <IT_OCP_SWOUT 0>; + regulator-active-discharge = <1>; + }; + }; + + onkey { + compatible = "st,stpmic1-onkey"; + interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 0>; + interrupt-names = "onkey-falling", "onkey-rising"; + power-off-time-sec = <10>; + status = "okay"; + }; + + watchdog { + compatible = "st,stpmic1-wdt"; + status = "disabled"; + }; + }; +}; + +&i2s2 { + clocks = <&rcc SPI2>, <&rcc SPI2_K>, <&rcc PLL3_Q>, <&rcc PLL3_R>; + clock-names = "pclk", "i2sclk", "x8k", "x11k"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2s2_pins_a>; + pinctrl-1 = <&i2s2_pins_sleep_a>; + status = "okay"; + + i2s2_port: port { + i2s2_endpoint: endpoint { + remote-endpoint = <&sii9022_tx_endpoint>; + format = "i2s"; + mclk-fs = <256>; + }; + }; +}; + +&ipcc { + status = "okay"; +}; + +&iwdg2 { + timeout-sec = <32>; + status = "okay"; +}; + +<dc { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <<dc_pins_a>; + pinctrl-1 = <<dc_pins_sleep_a>; + status = "okay"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + ltdc_ep0_out: endpoint@0 { + reg = <0>; + remote-endpoint = <&sii9022_in>; + }; + }; +}; + +&m4_rproc { + memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>, + <&vdev0vring1>, <&vdev0buffer>; + mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>; + mbox-names = "vq0", "vq1", "shutdown"; + interrupt-parent = <&exti>; + interrupts = <68 1>; + status = "okay"; +}; + +&pwr_regulators { + vdd-supply = <&vdd>; + vdd_3v3_usbfs-supply = <&vdd_usb>; +}; + +&rng1 { + status = "okay"; +}; + +&rtc { + status = "okay"; +}; + +&sai2 { + clocks = <&rcc SAI2>, <&rcc PLL3_Q>, <&rcc PLL3_R>; + clock-names = "pclk", "x8k", "x11k"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sai2a_pins_a>, <&sai2b_pins_b>; + pinctrl-1 = <&sai2a_sleep_pins_a>, <&sai2b_sleep_pins_b>; + status = "okay"; + + sai2a: audio-controller@4400b004 { + #clock-cells = <0>; + dma-names = "tx"; + clocks = <&rcc SAI2_K>; + clock-names = "sai_ck"; + status = "okay"; + + sai2a_port: port { + sai2a_endpoint: endpoint { + remote-endpoint = <&cs42l51_tx_endpoint>; + format = "i2s"; + mclk-fs = <256>; + dai-tdm-slot-num = <2>; + dai-tdm-slot-width = <32>; + }; + }; + }; + + sai2b: audio-controller@4400b024 { + dma-names = "rx"; + st,sync = <&sai2a 2>; + clocks = <&rcc SAI2_K>, <&sai2a>; + clock-names = "sai_ck", "MCLK"; + status = "okay"; + + sai2b_port: port { + sai2b_endpoint: endpoint { + remote-endpoint = <&cs42l51_rx_endpoint>; + format = "i2s"; + mclk-fs = <256>; + dai-tdm-slot-num = <2>; + dai-tdm-slot-width = <32>; + }; + }; + }; +}; + +&sdmmc1 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc1_b4_pins_a>; + pinctrl-1 = <&sdmmc1_b4_od_pins_a>; + pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>; + broken-cd; + st,neg-edge; + bus-width = <4>; + vmmc-supply = <&v3v3>; + status = "okay"; +}; + +&sdmmc3 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc3_b4_pins_a>; + pinctrl-1 = <&sdmmc3_b4_od_pins_a>; + pinctrl-2 = <&sdmmc3_b4_sleep_pins_a>; + broken-cd; + st,neg-edge; + bus-width = <4>; + vmmc-supply = <&v3v3>; + status = "disabled"; +}; + +&timers1 { + /* spare dmas for other usage */ + /delete-property/dmas; + /delete-property/dma-names; + status = "disabled"; + pwm { + pinctrl-0 = <&pwm1_pins_a>; + pinctrl-1 = <&pwm1_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + status = "okay"; + }; + timer@0 { + status = "okay"; + }; +}; + +&timers3 { + /delete-property/dmas; + /delete-property/dma-names; + status = "disabled"; + pwm { + pinctrl-0 = <&pwm3_pins_a>; + pinctrl-1 = <&pwm3_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + status = "okay"; + }; + timer@2 { + status = "okay"; + }; +}; + +&timers4 { + /delete-property/dmas; + /delete-property/dma-names; + status = "disabled"; + pwm { + pinctrl-0 = <&pwm4_pins_a &pwm4_pins_b>; + pinctrl-1 = <&pwm4_sleep_pins_a &pwm4_sleep_pins_b>; + pinctrl-names = "default", "sleep"; + status = "okay"; + }; + timer@3 { + status = "okay"; + }; +}; + +&timers5 { + /delete-property/dmas; + /delete-property/dma-names; + status = "disabled"; + pwm { + pinctrl-0 = <&pwm5_pins_a>; + pinctrl-1 = <&pwm5_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + status = "okay"; + }; + timer@4 { + status = "okay"; + }; +}; + +&timers6 { + /delete-property/dmas; + /delete-property/dma-names; + status = "disabled"; + timer@5 { + status = "okay"; + }; +}; + +&timers12 { + /delete-property/dmas; + /delete-property/dma-names; + status = "disabled"; + pwm { + pinctrl-0 = <&pwm12_pins_a>; + pinctrl-1 = <&pwm12_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + status = "okay"; + }; + timer@11 { + status = "okay"; + }; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins_a>; + status = "okay"; +}; + +&usbh_ehci { + phys = <&usbphyc_port0>; + status = "okay"; +}; + +&usbotg_hs { + dr_mode = "peripheral"; + phys = <&usbphyc_port1 0>; + phy-names = "usb2-phy"; + status = "okay"; +}; + +&usbphyc { + status = "okay"; +}; + +&usbphyc_port0 { + phy-supply = <&vdd_usb>; +}; + +&usbphyc_port1 { + phy-supply = <&vdd_usb>; +}; + +&vrefbuf { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + vdda-supply = <&vdd>; + status = "okay"; +}; diff --git a/arch/arm/dts/stm32mp15xxaa-pinctrl.dtsi b/arch/arm/dts/stm32mp15xxaa-pinctrl.dtsi new file mode 100644 index 0000000000..04f7a43ad6 --- /dev/null +++ b/arch/arm/dts/stm32mp15xxaa-pinctrl.dtsi @@ -0,0 +1,85 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2019 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics. + */ + +&pinctrl { + st,package = <STM32MP_PKG_AA>; + + gpioa: gpio@50002000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 0 16>; + }; + + gpiob: gpio@50003000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 16 16>; + }; + + gpioc: gpio@50004000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 32 16>; + }; + + gpiod: gpio@50005000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 48 16>; + }; + + gpioe: gpio@50006000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 64 16>; + }; + + gpiof: gpio@50007000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 80 16>; + }; + + gpiog: gpio@50008000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 96 16>; + }; + + gpioh: gpio@50009000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 112 16>; + }; + + gpioi: gpio@5000a000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 128 16>; + }; + + gpioj: gpio@5000b000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 144 16>; + }; + + gpiok: gpio@5000c000 { + status = "okay"; + ngpios = <8>; + gpio-ranges = <&pinctrl 0 160 8>; + }; +}; + +&pinctrl_z { + st,package = <STM32MP_PKG_AA>; + + gpioz: gpio@54004000 { + status = "okay"; + ngpios = <8>; + gpio-ranges = <&pinctrl_z 0 400 8>; + }; +}; diff --git a/arch/arm/dts/stm32mp15xxab-pinctrl.dtsi b/arch/arm/dts/stm32mp15xxab-pinctrl.dtsi new file mode 100644 index 0000000000..328dad140e --- /dev/null +++ b/arch/arm/dts/stm32mp15xxab-pinctrl.dtsi @@ -0,0 +1,57 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2019 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics. + */ + +&pinctrl { + st,package = <STM32MP_PKG_AB>; + + gpioa: gpio@50002000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 0 16>; + }; + + gpiob: gpio@50003000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 16 16>; + }; + + gpioc: gpio@50004000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 32 16>; + }; + + gpiod: gpio@50005000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 48 16>; + }; + + gpioe: gpio@50006000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 64 16>; + }; + + gpiof: gpio@50007000 { + status = "okay"; + ngpios = <6>; + gpio-ranges = <&pinctrl 6 86 6>; + }; + + gpiog: gpio@50008000 { + status = "okay"; + ngpios = <10>; + gpio-ranges = <&pinctrl 6 102 10>; + }; + + gpioh: gpio@50009000 { + status = "okay"; + ngpios = <2>; + gpio-ranges = <&pinctrl 0 112 2>; + }; +}; diff --git a/arch/arm/dts/stm32mp15xxac-pinctrl.dtsi b/arch/arm/dts/stm32mp15xxac-pinctrl.dtsi new file mode 100644 index 0000000000..7eaa245f44 --- /dev/null +++ b/arch/arm/dts/stm32mp15xxac-pinctrl.dtsi @@ -0,0 +1,73 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2019 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics. + */ + +&pinctrl { + st,package = <STM32MP_PKG_AC>; + + gpioa: gpio@50002000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 0 16>; + }; + + gpiob: gpio@50003000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 16 16>; + }; + + gpioc: gpio@50004000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 32 16>; + }; + + gpiod: gpio@50005000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 48 16>; + }; + + gpioe: gpio@50006000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 64 16>; + }; + + gpiof: gpio@50007000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 80 16>; + }; + + gpiog: gpio@50008000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 96 16>; + }; + + gpioh: gpio@50009000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 112 16>; + }; + + gpioi: gpio@5000a000 { + status = "okay"; + ngpios = <12>; + gpio-ranges = <&pinctrl 0 128 12>; + }; +}; + +&pinctrl_z { + st,package = <STM32MP_PKG_AC>; + + gpioz: gpio@54004000 { + status = "okay"; + ngpios = <8>; + gpio-ranges = <&pinctrl_z 0 400 8>; + }; +}; diff --git a/arch/arm/dts/stm32mp15xxad-pinctrl.dtsi b/arch/arm/dts/stm32mp15xxad-pinctrl.dtsi new file mode 100644 index 0000000000..b63e207de2 --- /dev/null +++ b/arch/arm/dts/stm32mp15xxad-pinctrl.dtsi @@ -0,0 +1,57 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2019 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics. + */ + +&pinctrl { + st,package = <STM32MP_PKG_AD>; + + gpioa: gpio@50002000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 0 16>; + }; + + gpiob: gpio@50003000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 16 16>; + }; + + gpioc: gpio@50004000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 32 16>; + }; + + gpiod: gpio@50005000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 48 16>; + }; + + gpioe: gpio@50006000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 64 16>; + }; + + gpiof: gpio@50007000 { + status = "okay"; + ngpios = <6>; + gpio-ranges = <&pinctrl 6 86 6>; + }; + + gpiog: gpio@50008000 { + status = "okay"; + ngpios = <10>; + gpio-ranges = <&pinctrl 6 102 10>; + }; + + gpioh: gpio@50009000 { + status = "okay"; + ngpios = <2>; + gpio-ranges = <&pinctrl 0 112 2>; + }; +}; diff --git a/arch/arm/dts/zynq-cse-nor.dts b/arch/arm/dts/zynq-cse-nor.dts index 9710abadcf..197fbd717a 100644 --- a/arch/arm/dts/zynq-cse-nor.dts +++ b/arch/arm/dts/zynq-cse-nor.dts @@ -5,7 +5,6 @@ * Copyright (C) 2018 Xilinx, Inc. */ /dts-v1/; -#include "zynq-7000.dtsi" / { #address-cells = <1>; @@ -33,27 +32,21 @@ }; amba: amba { + u-boot,dm-pre-reloc; compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; - interrupt-parent = <&intc>; ranges; - intc: interrupt-controller@f8f01000 { - compatible = "arm,cortex-a9-gic"; - #interrupt-cells = <3>; - interrupt-controller; - reg = <0xF8F01000 0x1000>, - <0xF8F00100 0x100>; - }; - slcr: slcr@f8000000 { + u-boot,dm-pre-reloc; #address-cells = <1>; #size-cells = <1>; compatible = "xlnx,zynq-slcr", "syscon", "simple-bus"; reg = <0xF8000000 0x1000>; ranges; clkc: clkc@100 { + u-boot,dm-pre-reloc; #clock-cells = <1>; compatible = "xlnx,ps7-clkc"; clock-output-names = "armpll", "ddrpll", @@ -78,6 +71,20 @@ reg = <0x100 0x100>; }; }; + + /* + * This is partially hack because it is normally subnode of smcc + * but for mini U-Boot there is no reason to enable SMCC driver + * which does almost nothing in NOR flash configuration that's + * why place cfi-flash directly here. + */ + flash@e2000000 { + u-boot,dm-pre-reloc; + compatible = "cfi-flash"; + reg = <0xe2000000 0x2000000>; + #address-cells = <1>; + #size-cells = <1>; + }; }; }; diff --git a/arch/arm/dts/zynq-cse-qspi.dtsi b/arch/arm/dts/zynq-cse-qspi.dtsi index 65af4081ff..eb0e29e6cb 100644 --- a/arch/arm/dts/zynq-cse-qspi.dtsi +++ b/arch/arm/dts/zynq-cse-qspi.dtsi @@ -67,23 +67,23 @@ spi-max-frequency = <50000000>; #address-cells = <1>; #size-cells = <1>; - partition@qspi-fsbl-uboot { + partition@0 { label = "qspi-fsbl-uboot"; reg = <0x0 0x100000>; }; - partition@qspi-linux { + partition@100000 { label = "qspi-linux"; reg = <0x100000 0x500000>; }; - partition@qspi-device-tree { + partition@600000 { label = "qspi-device-tree"; reg = <0x600000 0x20000>; }; - partition@qspi-rootfs { + partition@620000 { label = "qspi-rootfs"; reg = <0x620000 0x5E0000>; }; - partition@qspi-bitstream { + partition@c00000 { label = "qspi-bitstream"; reg = <0xC00000 0x400000>; }; diff --git a/arch/arm/dts/zynq-topic-miami.dts b/arch/arm/dts/zynq-topic-miami.dts index f6f10fe1a1..ab6bde95fe 100644 --- a/arch/arm/dts/zynq-topic-miami.dts +++ b/arch/arm/dts/zynq-topic-miami.dts @@ -44,23 +44,23 @@ spi-max-frequency = <100000000>; #address-cells = <1>; #size-cells = <1>; - partition@qspi-u-boot-spl { + partition@0 { label = "qspi-u-boot-spl"; reg = <0x00000 0x10000>; }; - partition@qspi-u-boot-img { + partition@10000 { label = "qspi-u-boot-img"; reg = <0x10000 0x60000>; }; - partition@qspi-device-tree { + partition@70000 { label = "qspi-device-tree"; reg = <0x70000 0x10000>; }; - partition@qspi-linux { + partition@80000 { label = "qspi-linux"; reg = <0x80000 0x400000>; }; - partition@qspi-rootfs { + partition@480000 { label = "qspi-rootfs"; reg = <0x480000 0x1b80000>; }; diff --git a/arch/arm/dts/zynq-zc702.dts b/arch/arm/dts/zynq-zc702.dts index d10695740f..b043d341d6 100644 --- a/arch/arm/dts/zynq-zc702.dts +++ b/arch/arm/dts/zynq-zc702.dts @@ -181,17 +181,17 @@ #address-cells = <1>; #size-cells = <0>; reg = <7>; - hwmon@52 { + hwmon@34 { compatible = "ti,ucd9248"; - reg = <52>; + reg = <0x34>; }; - hwmon@53 { + hwmon@35 { compatible = "ti,ucd9248"; - reg = <53>; + reg = <0x35>; }; - hwmon@54 { + hwmon@36 { compatible = "ti,ucd9248"; - reg = <54>; + reg = <0x36>; }; }; }; diff --git a/arch/arm/dts/zynq-zc770-xm010.dts b/arch/arm/dts/zynq-zc770-xm010.dts index e1f34653ec..c547d7921d 100644 --- a/arch/arm/dts/zynq-zc770-xm010.dts +++ b/arch/arm/dts/zynq-zc770-xm010.dts @@ -72,7 +72,7 @@ status = "okay"; num-cs = <4>; is-decoded-cs = <0>; - flash@0 { + flash@1 { compatible = "sst25wf080", "jedec,spi-nor"; reg = <1>; spi-max-frequency = <1000000>; diff --git a/arch/arm/dts/zynq-zc770-xm011-x16.dts b/arch/arm/dts/zynq-zc770-xm011-x16.dts index 5bd6af39a4..6ff8393d7e 120000..100644 --- a/arch/arm/dts/zynq-zc770-xm011-x16.dts +++ b/arch/arm/dts/zynq-zc770-xm011-x16.dts @@ -1 +1,11 @@ -zynq-zc770-xm011.dts
\ No newline at end of file +// SPDX-License-Identifier: GPL-2.0+ +/* + * Xilinx ZC770 XM011 board DTS with NAND x16 + * + * Copyright (C) 2013-2018 Xilinx, Inc. + */ +#include "zynq-zc770-xm011.dts" + +/ { + model = "Xilinx ZC770 XM011 board (NAND x16)"; +}; diff --git a/arch/arm/dts/zynq-zc770-xm011.dts b/arch/arm/dts/zynq-zc770-xm011.dts index 61482017d6..b6e3e255d7 100644 --- a/arch/arm/dts/zynq-zc770-xm011.dts +++ b/arch/arm/dts/zynq-zc770-xm011.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0+ /* - * Xilinx ZC770 XM013 board DTS + * Xilinx ZC770 XM011 board DTS * * Copyright (C) 2013-2018 Xilinx, Inc. */ diff --git a/arch/arm/dts/zynq-zc770-xm013.dts b/arch/arm/dts/zynq-zc770-xm013.dts index 05a49982cc..bdf0c2f956 100644 --- a/arch/arm/dts/zynq-zc770-xm013.dts +++ b/arch/arm/dts/zynq-zc770-xm013.dts @@ -67,7 +67,7 @@ status = "okay"; num-cs = <4>; is-decoded-cs = <0>; - eeprom: eeprom@0 { + eeprom: eeprom@2 { at25,byte-len = <8192>; at25,addr-mode = <2>; at25,page-size = <32>; diff --git a/arch/arm/dts/zynq-zturn.dts b/arch/arm/dts/zynq-zturn.dts index cc41efcb46..600e8ee025 100644 --- a/arch/arm/dts/zynq-zturn.dts +++ b/arch/arm/dts/zynq-zturn.dts @@ -54,7 +54,7 @@ label = "K1"; gpios = <&gpio0 0x32 0x1>; linux,code = <0x66>; - gpio-key,wakeup; + wakeup-source; autorepeat; }; }; diff --git a/arch/arm/dts/zynqmp-clk-ccf.dtsi b/arch/arm/dts/zynqmp-clk-ccf.dtsi index 8eacd22d7c..b02ef22abd 100644 --- a/arch/arm/dts/zynqmp-clk-ccf.dtsi +++ b/arch/arm/dts/zynqmp-clk-ccf.dtsi @@ -2,7 +2,7 @@ /* * Clock specification for Xilinx ZynqMP * - * (C) Copyright 2017 - 2019, Xilinx, Inc. + * (C) Copyright 2017 - 2020, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> */ @@ -284,10 +284,18 @@ clocks = <&zynqmp_clk AMS_REF>; }; +&zynqmp_dpsub { + clocks = <&dp_aclk>, <&zynqmp_clk DP_AUDIO_REF>, <&zynqmp_clk DP_VIDEO_REF>; +}; + &xlnx_dpdma { clocks = <&zynqmp_clk DPDMA_REF>; }; -&xlnx_dp_snd_codec0 { +&zynqmp_dp_snd_codec0 { clocks = <&zynqmp_clk DP_AUDIO_REF>; }; + +&zynqmp_pcap { + clocks = <&zynqmp_clk PCAP>; +}; diff --git a/arch/arm/dts/zynqmp-clk.dtsi b/arch/arm/dts/zynqmp-clk.dtsi deleted file mode 100644 index c9464ec8eb..0000000000 --- a/arch/arm/dts/zynqmp-clk.dtsi +++ /dev/null @@ -1,244 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Clock specification for Xilinx ZynqMP - * - * (C) Copyright 2015 - 2018, Xilinx, Inc. - * - * Michal Simek <michal.simek@xilinx.com> - */ - -/ { - clk100: clk100 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <100000000>; - u-boot,dm-pre-reloc; - }; - - clk125: clk125 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <125000000>; - }; - - clk200: clk200 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <200000000>; - u-boot,dm-pre-reloc; - }; - - clk250: clk250 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <250000000>; - }; - - clk300: clk300 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <300000000>; - u-boot,dm-pre-reloc; - }; - - clk600: clk600 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <600000000>; - }; - - dp_aclk: clock0 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <100000000>; - clock-accuracy = <100>; - }; - - dp_aud_clk: clock1 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <24576000>; - clock-accuracy = <100>; - }; - - dpdma_clk: dpdma-clk { - compatible = "fixed-clock"; - #clock-cells = <0x0>; - clock-frequency = <533000000>; - }; - - drm_clock: drm-clock { - compatible = "fixed-clock"; - #clock-cells = <0x0>; - clock-frequency = <262750000>; - clock-accuracy = <0x64>; - }; -}; - -&can0 { - clocks = <&clk100 &clk100>; -}; - -&can1 { - clocks = <&clk100 &clk100>; -}; - -&fpd_dma_chan1 { - clocks = <&clk600>, <&clk100>; -}; - -&fpd_dma_chan2 { - clocks = <&clk600>, <&clk100>; -}; - -&fpd_dma_chan3 { - clocks = <&clk600>, <&clk100>; -}; - -&fpd_dma_chan4 { - clocks = <&clk600>, <&clk100>; -}; - -&fpd_dma_chan5 { - clocks = <&clk600>, <&clk100>; -}; - -&fpd_dma_chan6 { - clocks = <&clk600>, <&clk100>; -}; - -&fpd_dma_chan7 { - clocks = <&clk600>, <&clk100>; -}; - -&fpd_dma_chan8 { - clocks = <&clk600>, <&clk100>; -}; - -&lpd_dma_chan1 { - clocks = <&clk600>, <&clk100>; -}; - -&lpd_dma_chan2 { - clocks = <&clk600>, <&clk100>; -}; - -&lpd_dma_chan3 { - clocks = <&clk600>, <&clk100>; -}; - -&lpd_dma_chan4 { - clocks = <&clk600>, <&clk100>; -}; - -&lpd_dma_chan5 { - clocks = <&clk600>, <&clk100>; -}; - -&lpd_dma_chan6 { - clocks = <&clk600>, <&clk100>; -}; - -&lpd_dma_chan7 { - clocks = <&clk600>, <&clk100>; -}; - -&lpd_dma_chan8 { - clocks = <&clk600>, <&clk100>; -}; - -&nand0 { - clocks = <&clk100 &clk100>; -}; - -&gem0 { - clocks = <&clk125>, <&clk125>, <&clk125>; -}; - -&gem1 { - clocks = <&clk125>, <&clk125>, <&clk125>; -}; - -&gem2 { - clocks = <&clk125>, <&clk125>, <&clk125>; -}; - -&gem3 { - clocks = <&clk125>, <&clk125>, <&clk125>; -}; - -&gpio { - clocks = <&clk100>; -}; - -&i2c0 { - clocks = <&clk100>; -}; - -&i2c1 { - clocks = <&clk100>; -}; - -&qspi { - clocks = <&clk300 &clk300>; -}; - -&sata { - clocks = <&clk250>; -}; - -&sdhci0 { - clocks = <&clk200 &clk200>; -}; - -&sdhci1 { - clocks = <&clk200 &clk200>; -}; - -&spi0 { - clocks = <&clk200 &clk200>; -}; - -&spi1 { - clocks = <&clk200 &clk200>; -}; - -&uart0 { - clocks = <&clk100 &clk100>; -}; - -&uart1 { - clocks = <&clk100 &clk100>; -}; - -&usb0 { - clocks = <&clk250>, <&clk250>; -}; - -&usb1 { - clocks = <&clk250>, <&clk250>; -}; - -&watchdog0 { - clocks = <&clk100>; -}; - -&lpd_watchdog { - clocks = <&clk250>; -}; - -&xilinx_drm { - clocks = <&drm_clock>; -}; - -&xlnx_dp { - clocks = <&dp_aclk>, <&dp_aud_clk>; -}; - -&xlnx_dpdma { - clocks = <&dpdma_clk>; -}; - -&xlnx_dp_snd_codec0 { - clocks = <&dp_aud_clk>; -}; diff --git a/arch/arm/dts/zynqmp-mini-qspi.dts b/arch/arm/dts/zynqmp-mini-qspi.dts index e4ba5ae9b6..c523e81236 100644 --- a/arch/arm/dts/zynqmp-mini-qspi.dts +++ b/arch/arm/dts/zynqmp-mini-qspi.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP Mini Configuration * - * (C) Copyright 2015 - 2018, Xilinx, Inc. + * (C) Copyright 2015 - 2020, Xilinx, Inc. * * Siva Durga Prasad <siva.durga.paladugu@xilinx.com> * Michal Simek <michal.simek@xilinx.com> diff --git a/arch/arm/dts/zynqmp-zc1232-revA.dts b/arch/arm/dts/zynqmp-zc1232-revA.dts index 6117f83c47..afb3e96520 100644 --- a/arch/arm/dts/zynqmp-zc1232-revA.dts +++ b/arch/arm/dts/zynqmp-zc1232-revA.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP ZC1232 * - * (C) Copyright 2017 - 2018, Xilinx, Inc. + * (C) Copyright 2017 - 2020, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> */ @@ -48,19 +48,19 @@ spi-tx-bus-width = <1>; spi-rx-bus-width = <4>; spi-max-frequency = <108000000>; /* Based on DC1 spec */ - partition@qspi-fsbl-uboot { /* for testing purpose */ + partition@0 { /* for testing purpose */ label = "qspi-fsbl-uboot"; reg = <0x0 0x100000>; }; - partition@qspi-linux { /* for testing purpose */ + partition@100000 { /* for testing purpose */ label = "qspi-linux"; reg = <0x100000 0x500000>; }; - partition@qspi-device-tree { /* for testing purpose */ + partition@600000 { /* for testing purpose */ label = "qspi-device-tree"; reg = <0x600000 0x20000>; }; - partition@qspi-rootfs { /* for testing purpose */ + partition@620000 { /* for testing purpose */ label = "qspi-rootfs"; reg = <0x620000 0x5E0000>; }; diff --git a/arch/arm/dts/zynqmp-zc1254-revA.dts b/arch/arm/dts/zynqmp-zc1254-revA.dts index 6ac8346d23..9cc1c0c6c5 100644 --- a/arch/arm/dts/zynqmp-zc1254-revA.dts +++ b/arch/arm/dts/zynqmp-zc1254-revA.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP ZC1254 * - * (C) Copyright 2015 - 2018, Xilinx, Inc. + * (C) Copyright 2015 - 2020, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> * Siva Durga Prasad Paladugu <sivadur@xilinx.com> @@ -48,19 +48,19 @@ spi-tx-bus-width = <1>; spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */ spi-max-frequency = <108000000>; /* Based on DC1 spec */ - partition@qspi-fsbl-uboot { /* for testing purpose */ + partition@0 { /* for testing purpose */ label = "qspi-fsbl-uboot"; reg = <0x0 0x100000>; }; - partition@qspi-linux { /* for testing purpose */ + partition@100000 { /* for testing purpose */ label = "qspi-linux"; reg = <0x100000 0x500000>; }; - partition@qspi-device-tree { /* for testing purpose */ + partition@600000 { /* for testing purpose */ label = "qspi-device-tree"; reg = <0x600000 0x20000>; }; - partition@qspi-rootfs { /* for testing purpose */ + partition@620000 { /* for testing purpose */ label = "qspi-rootfs"; reg = <0x620000 0x5E0000>; }; diff --git a/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts b/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts index bb6a94eefb..0805b93c4a 100644 --- a/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts +++ b/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP zc1751-xm015-dc1 * - * (C) Copyright 2015 - 2018, Xilinx, Inc. + * (C) Copyright 2015 - 2020, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> */ @@ -108,19 +108,19 @@ spi-tx-bus-width = <1>; spi-rx-bus-width = <4>; spi-max-frequency = <108000000>; /* Based on DC1 spec */ - partition@qspi-fsbl-uboot { /* for testing purpose */ + partition@0 { /* for testing purpose */ label = "qspi-fsbl-uboot"; reg = <0x0 0x100000>; }; - partition@qspi-linux { /* for testing purpose */ + partition@100000 { /* for testing purpose */ label = "qspi-linux"; reg = <0x100000 0x500000>; }; - partition@qspi-device-tree { /* for testing purpose */ + partition@600000 { /* for testing purpose */ label = "qspi-device-tree"; reg = <0x600000 0x20000>; }; - partition@qspi-rootfs { /* for testing purpose */ + partition@620000 { /* for testing purpose */ label = "qspi-rootfs"; reg = <0x620000 0x5E0000>; }; @@ -154,7 +154,10 @@ /* SD1 with level shifter */ &sdhci1 { status = "okay"; - no-1-8-v; /* for 1.0 silicon */ + /* + * This property should be removed for supporting UHS mode + */ + no-1-8-v; xlnx,mio_bank = <1>; }; @@ -172,32 +175,23 @@ dr_mode = "host"; }; -&xilinx_drm { +&zynqmp_dpsub { status = "okay"; }; -&xlnx_dp { +&zynqmp_dp_snd_pcm0 { status = "okay"; }; -&xlnx_dp_sub { +&zynqmp_dp_snd_pcm1 { status = "okay"; - xlnx,vid-clk-pl; }; -&xlnx_dp_snd_pcm0 { +&zynqmp_dp_snd_card0 { status = "okay"; }; -&xlnx_dp_snd_pcm1 { - status = "okay"; -}; - -&xlnx_dp_snd_card { - status = "okay"; -}; - -&xlnx_dp_snd_codec0 { +&zynqmp_dp_snd_codec0 { status = "okay"; }; diff --git a/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts b/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts index 1cc8aaa879..92d938d665 100644 --- a/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts +++ b/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP zc1751-xm016-dc2 * - * (C) Copyright 2015 - 2018, Xilinx, Inc. + * (C) Copyright 2015 - 2020, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> */ @@ -197,7 +197,7 @@ reg = <0>; partition@0 { - label = "data"; + label = "spi0-data"; reg = <0x0 0x100000>; }; }; @@ -214,7 +214,7 @@ reg = <0>; partition@0 { - label = "data"; + label = "spi1-data"; reg = <0x0 0x84000>; }; }; diff --git a/arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts b/arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts index 2ead8dd24d..c7de59e1e9 100644 --- a/arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts +++ b/arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP zc1751-xm017-dc3 * - * (C) Copyright 2016 - 2018, Xilinx, Inc. + * (C) Copyright 2016 - 2020, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> */ diff --git a/arch/arm/dts/zynqmp-zc1751-xm018-dc4.dts b/arch/arm/dts/zynqmp-zc1751-xm018-dc4.dts index 84c2904dc2..9b38b8b919 100644 --- a/arch/arm/dts/zynqmp-zc1751-xm018-dc4.dts +++ b/arch/arm/dts/zynqmp-zc1751-xm018-dc4.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP zc1751-xm018-dc4 * - * (C) Copyright 2015 - 2018, Xilinx, Inc. + * (C) Copyright 2015 - 2020, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> */ @@ -115,7 +115,7 @@ status = "okay"; }; -&xlnx_dp { +&zynqmp_dpsub { status = "okay"; }; @@ -187,19 +187,19 @@ spi-tx-bus-width = <1>; spi-rx-bus-width = <4>; /* also DUAL configuration possible */ spi-max-frequency = <108000000>; /* Based on DC1 spec */ - partition@qspi-fsbl-uboot { /* for testing purpose */ + partition@0 { /* for testing purpose */ label = "qspi-fsbl-uboot"; reg = <0x0 0x100000>; }; - partition@qspi-linux { /* for testing purpose */ + partition@100000 { /* for testing purpose */ label = "qspi-linux"; reg = <0x100000 0x500000>; }; - partition@qspi-device-tree { /* for testing purpose */ + partition@600000 { /* for testing purpose */ label = "qspi-device-tree"; reg = <0x600000 0x20000>; }; - partition@qspi-rootfs { /* for testing purpose */ + partition@620000 { /* for testing purpose */ label = "qspi-rootfs"; reg = <0x620000 0x5E0000>; }; diff --git a/arch/arm/dts/zynqmp-zc1751-xm019-dc5.dts b/arch/arm/dts/zynqmp-zc1751-xm019-dc5.dts index 12c0173c55..8d8ebeaac3 100644 --- a/arch/arm/dts/zynqmp-zc1751-xm019-dc5.dts +++ b/arch/arm/dts/zynqmp-zc1751-xm019-dc5.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP zc1751-xm019-dc5 * - * (C) Copyright 2015 - 2018, Xilinx, Inc. + * (C) Copyright 2015 - 2020, Xilinx, Inc. * * Siva Durga Prasad <siva.durga.paladugu@xilinx.com> * Michal Simek <michal.simek@xilinx.com> diff --git a/arch/arm/dts/zynqmp-zcu100-revC.dts b/arch/arm/dts/zynqmp-zcu100-revC.dts index 21118c8cc3..1726edf78e 100644 --- a/arch/arm/dts/zynqmp-zcu100-revC.dts +++ b/arch/arm/dts/zynqmp-zcu100-revC.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP ZCU100 revC * - * (C) Copyright 2016 - 2018, Xilinx, Inc. + * (C) Copyright 2016 - 2020, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> * Nathalie Chan King Choy diff --git a/arch/arm/dts/zynqmp-zcu102-rev1.0.dts b/arch/arm/dts/zynqmp-zcu102-rev1.0.dts index 6c702f2674..d508f33599 100644 --- a/arch/arm/dts/zynqmp-zcu102-rev1.0.dts +++ b/arch/arm/dts/zynqmp-zcu102-rev1.0.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP ZCU102 Rev1.0 * - * (C) Copyright 2016 - 2018, Xilinx, Inc. + * (C) Copyright 2016 - 2020, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> */ @@ -34,7 +34,3 @@ reg = <0xe0 0x3>; }; }; - -&sdhci1 { - /delete-property/ no-1-8-v; -}; diff --git a/arch/arm/dts/zynqmp-zcu102-rev1.1.dts b/arch/arm/dts/zynqmp-zcu102-rev1.1.dts new file mode 100644 index 0000000000..b6798394fc --- /dev/null +++ b/arch/arm/dts/zynqmp-zcu102-rev1.1.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * dts file for Xilinx ZynqMP ZCU102 Rev1.1 + * + * (C) Copyright 2016 - 2020, Xilinx, Inc. + * + * Michal Simek <michal.simek@xilinx.com> + */ + +#include "zynqmp-zcu102-rev1.0.dts" + +/ { + model = "ZynqMP ZCU102 Rev1.1"; + compatible = "xlnx,zynqmp-zcu102-rev1.1", "xlnx,zynqmp-zcu102", "xlnx,zynqmp"; +}; diff --git a/arch/arm/dts/zynqmp-zcu102-revA.dts b/arch/arm/dts/zynqmp-zcu102-revA.dts index b580f9263d..d250681600 100644 --- a/arch/arm/dts/zynqmp-zcu102-revA.dts +++ b/arch/arm/dts/zynqmp-zcu102-revA.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP ZCU102 RevA * - * (C) Copyright 2015 - 2018, Xilinx, Inc. + * (C) Copyright 2015 - 2020, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> */ @@ -614,19 +614,19 @@ spi-tx-bus-width = <1>; spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */ spi-max-frequency = <108000000>; /* Based on DC1 spec */ - partition@qspi-fsbl-uboot { /* for testing purpose */ + partition@0 { /* for testing purpose */ label = "qspi-fsbl-uboot"; reg = <0x0 0x100000>; }; - partition@qspi-linux { /* for testing purpose */ + partition@100000 { /* for testing purpose */ label = "qspi-linux"; reg = <0x100000 0x500000>; }; - partition@qspi-device-tree { /* for testing purpose */ + partition@600000 { /* for testing purpose */ label = "qspi-device-tree"; reg = <0x600000 0x20000>; }; - partition@qspi-rootfs { /* for testing purpose */ + partition@620000 { /* for testing purpose */ label = "qspi-rootfs"; reg = <0x620000 0x5E0000>; }; @@ -655,7 +655,11 @@ /* SD1 with level shifter */ &sdhci1 { status = "okay"; - no-1-8-v; /* for 1.0 silicon */ + /* + * 1.0 revision has level shifter and this property should be + * removed for supporting UHS mode + */ + no-1-8-v; xlnx,mio_bank = <1>; }; @@ -701,33 +705,23 @@ status = "okay"; }; -&xilinx_drm { +&zynqmp_dpsub { status = "okay"; - clocks = <&si570_1>; }; -&xlnx_dp { +&zynqmp_dp_snd_codec0 { status = "okay"; }; -&xlnx_dp_sub { +&zynqmp_dp_snd_pcm0 { status = "okay"; - xlnx,vid-clk-pl; }; -&xlnx_dp_snd_pcm0 { +&zynqmp_dp_snd_pcm1 { status = "okay"; }; -&xlnx_dp_snd_pcm1 { - status = "okay"; -}; - -&xlnx_dp_snd_card { - status = "okay"; -}; - -&xlnx_dp_snd_codec0 { +&zynqmp_dp_snd_card0 { status = "okay"; }; diff --git a/arch/arm/dts/zynqmp-zcu102-revB.dts b/arch/arm/dts/zynqmp-zcu102-revB.dts index 38ec188164..2422558b74 100644 --- a/arch/arm/dts/zynqmp-zcu102-revB.dts +++ b/arch/arm/dts/zynqmp-zcu102-revB.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP ZCU102 RevB * - * (C) Copyright 2016 - 2018, Xilinx, Inc. + * (C) Copyright 2016 - 2020, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> */ diff --git a/arch/arm/dts/zynqmp-zcu104-revA.dts b/arch/arm/dts/zynqmp-zcu104-revA.dts index 82557c88d2..3ceb39dce0 100644 --- a/arch/arm/dts/zynqmp-zcu104-revA.dts +++ b/arch/arm/dts/zynqmp-zcu104-revA.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP ZCU104 * - * (C) Copyright 2017 - 2018, Xilinx, Inc. + * (C) Copyright 2017 - 2020, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> */ @@ -209,19 +209,19 @@ spi-tx-bus-width = <1>; spi-rx-bus-width = <4>; spi-max-frequency = <108000000>; /* Based on DC1 spec */ - partition@qspi-fsbl-uboot { /* for testing purpose */ + partition@0 { /* for testing purpose */ label = "qspi-fsbl-uboot"; reg = <0x0 0x100000>; }; - partition@qspi-linux { /* for testing purpose */ + partition@100000 { /* for testing purpose */ label = "qspi-linux"; reg = <0x100000 0x500000>; }; - partition@qspi-device-tree { /* for testing purpose */ + partition@600000 { /* for testing purpose */ label = "qspi-device-tree"; reg = <0x600000 0x20000>; }; - partition@qspi-rootfs { /* for testing purpose */ + partition@620000 { /* for testing purpose */ label = "qspi-rootfs"; reg = <0x620000 0x5E0000>; }; diff --git a/arch/arm/dts/zynqmp-zcu104-revC.dts b/arch/arm/dts/zynqmp-zcu104-revC.dts index e0e7dac010..7dad4523de 100644 --- a/arch/arm/dts/zynqmp-zcu104-revC.dts +++ b/arch/arm/dts/zynqmp-zcu104-revC.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP ZCU104 * - * (C) Copyright 2017 - 2018, Xilinx, Inc. + * (C) Copyright 2017 - 2020, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> */ @@ -222,19 +222,19 @@ spi-tx-bus-width = <1>; spi-rx-bus-width = <4>; spi-max-frequency = <108000000>; /* Based on DC1 spec */ - partition@qspi-fsbl-uboot { /* for testing purpose */ + partition@0 { /* for testing purpose */ label = "qspi-fsbl-uboot"; reg = <0x0 0x100000>; }; - partition@qspi-linux { /* for testing purpose */ + partition@100000 { /* for testing purpose */ label = "qspi-linux"; reg = <0x100000 0x500000>; }; - partition@qspi-device-tree { /* for testing purpose */ + partition@600000 { /* for testing purpose */ label = "qspi-device-tree"; reg = <0x600000 0x20000>; }; - partition@qspi-rootfs { /* for testing purpose */ + partition@620000 { /* for testing purpose */ label = "qspi-rootfs"; reg = <0x620000 0x5E0000>; }; diff --git a/arch/arm/dts/zynqmp-zcu106-revA.dts b/arch/arm/dts/zynqmp-zcu106-revA.dts index d31982fce7..221685fd23 100644 --- a/arch/arm/dts/zynqmp-zcu106-revA.dts +++ b/arch/arm/dts/zynqmp-zcu106-revA.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP ZCU106 * - * (C) Copyright 2016, Xilinx, Inc. + * (C) Copyright 2016 - 2020, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> */ @@ -612,19 +612,19 @@ spi-tx-bus-width = <1>; spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */ spi-max-frequency = <108000000>; /* Based on DC1 spec */ - partition@qspi-fsbl-uboot { /* for testing purpose */ + partition@0 { /* for testing purpose */ label = "qspi-fsbl-uboot"; reg = <0x0 0x100000>; }; - partition@qspi-linux { /* for testing purpose */ + partition@100000 { /* for testing purpose */ label = "qspi-linux"; reg = <0x100000 0x500000>; }; - partition@qspi-device-tree { /* for testing purpose */ + partition@600000 { /* for testing purpose */ label = "qspi-device-tree"; reg = <0x600000 0x20000>; }; - partition@qspi-rootfs { /* for testing purpose */ + partition@620000 { /* for testing purpose */ label = "qspi-rootfs"; reg = <0x620000 0x5E0000>; }; @@ -653,6 +653,10 @@ /* SD1 with level shifter */ &sdhci1 { status = "okay"; + /* + * This property should be removed for supporting UHS mode + */ + no-1-8-v; xlnx,mio_bank = <1>; }; diff --git a/arch/arm/dts/zynqmp-zcu111-revA.dts b/arch/arm/dts/zynqmp-zcu111-revA.dts index bff224f78d..d16bf8ac7a 100644 --- a/arch/arm/dts/zynqmp-zcu111-revA.dts +++ b/arch/arm/dts/zynqmp-zcu111-revA.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP ZCU111 * - * (C) Copyright 2017 - 2018, Xilinx, Inc. + * (C) Copyright 2017 - 2020, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> */ @@ -525,19 +525,19 @@ spi-tx-bus-width = <1>; spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */ spi-max-frequency = <108000000>; /* Based on DC1 spec */ - partition@qspi-fsbl-uboot { /* for testing purpose */ + partition@0 { /* for testing purpose */ label = "qspi-fsbl-uboot"; reg = <0x0 0x100000>; }; - partition@qspi-linux { /* for testing purpose */ + partition@100000 { /* for testing purpose */ label = "qspi-linux"; reg = <0x100000 0x500000>; }; - partition@qspi-device-tree { /* for testing purpose */ + partition@600000 { /* for testing purpose */ label = "qspi-device-tree"; reg = <0x600000 0x20000>; }; - partition@qspi-rootfs { /* for testing purpose */ + partition@620000 { /* for testing purpose */ label = "qspi-rootfs"; reg = <0x620000 0x5E0000>; }; @@ -567,6 +567,10 @@ &sdhci1 { status = "okay"; disable-wp; + /* + * This property should be removed for supporting UHS mode + */ + no-1-8-v; xlnx,mio_bank = <1>; }; diff --git a/arch/arm/dts/zynqmp-zcu1275-revA.dts b/arch/arm/dts/zynqmp-zcu1275-revA.dts index c22de576a5..cdd5c34187 100644 --- a/arch/arm/dts/zynqmp-zcu1275-revA.dts +++ b/arch/arm/dts/zynqmp-zcu1275-revA.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP ZCU1275 * - * (C) Copyright 2017 - 2018, Xilinx, Inc. + * (C) Copyright 2017 - 2020, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> * Siva Durga Prasad Paladugu <sivadur@xilinx.com> @@ -49,19 +49,19 @@ spi-tx-bus-width = <1>; spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */ spi-max-frequency = <108000000>; /* Based on DC1 spec */ - partition@qspi-fsbl-uboot { /* for testing purpose */ + partition@0 { /* for testing purpose */ label = "qspi-fsbl-uboot"; reg = <0x0 0x100000>; }; - partition@qspi-linux { /* for testing purpose */ + partition@100000 { /* for testing purpose */ label = "qspi-linux"; reg = <0x100000 0x500000>; }; - partition@qspi-device-tree { /* for testing purpose */ + partition@600000 { /* for testing purpose */ label = "qspi-device-tree"; reg = <0x600000 0x20000>; }; - partition@qspi-rootfs { /* for testing purpose */ + partition@620000 { /* for testing purpose */ label = "qspi-rootfs"; reg = <0x620000 0x5E0000>; }; diff --git a/arch/arm/dts/zynqmp-zcu1275-revB.dts b/arch/arm/dts/zynqmp-zcu1275-revB.dts index 2ec29b0b5d..430fc5adb4 100644 --- a/arch/arm/dts/zynqmp-zcu1275-revB.dts +++ b/arch/arm/dts/zynqmp-zcu1275-revB.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP ZCU1275 RevB * - * (C) Copyright 2018, Xilinx, Inc. + * (C) Copyright 2018 - 2020, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> * Siva Durga Prasad Paladugu <sivadur@xilinx.com> @@ -50,19 +50,19 @@ spi-tx-bus-width = <1>; spi-rx-bus-width = <1>; spi-max-frequency = <108000000>; /* Based on DC1 spec */ - partition@qspi-fsbl-uboot { /* for testing purpose */ + partition@0 { /* for testing purpose */ label = "qspi-fsbl-uboot"; reg = <0x0 0x100000>; }; - partition@qspi-linux { /* for testing purpose */ + partition@100000 { /* for testing purpose */ label = "qspi-linux"; reg = <0x100000 0x500000>; }; - partition@qspi-device-tree { /* for testing purpose */ + partition@600000 { /* for testing purpose */ label = "qspi-device-tree"; reg = <0x600000 0x20000>; }; - partition@qspi-rootfs { /* for testing purpose */ + partition@620000 { /* for testing purpose */ label = "qspi-rootfs"; reg = <0x620000 0x5E0000>; }; diff --git a/arch/arm/dts/zynqmp-zcu1285-revA.dts b/arch/arm/dts/zynqmp-zcu1285-revA.dts index 9c18013138..d8b9cb1a9e 100644 --- a/arch/arm/dts/zynqmp-zcu1285-revA.dts +++ b/arch/arm/dts/zynqmp-zcu1285-revA.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP ZCU1285 RevA * - * (C) Copyright 2018 - 2019, Xilinx, Inc. + * (C) Copyright 2018 - 2020, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> * Siva Durga Prasad Paladugu <sivadur@xilinx.com> @@ -241,5 +241,9 @@ &sdhci1 { status = "okay"; + /* + * This property should be removed for supporting UHS mode + */ + no-1-8-v; xlnx,mio_bank = <1>; }; diff --git a/arch/arm/dts/zynqmp-zcu208-revA.dts b/arch/arm/dts/zynqmp-zcu208-revA.dts index 9181060b89..75ecd7a5c2 100644 --- a/arch/arm/dts/zynqmp-zcu208-revA.dts +++ b/arch/arm/dts/zynqmp-zcu208-revA.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP ZCU208 * - * (C) Copyright 2017 - 2019, Xilinx, Inc. + * (C) Copyright 2017 - 2020, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> */ @@ -50,7 +50,7 @@ label = "sw19"; gpios = <&gpio 22 GPIO_ACTIVE_HIGH>; linux,code = <KEY_DOWN>; - gpio-key,wakeup; + wakeup-source; autorepeat; }; }; @@ -563,6 +563,10 @@ &sdhci1 { status = "okay"; disable-wp; + /* + * This property should be removed for supporting UHS mode + */ + no-1-8-v; xlnx,mio_bank = <1>; }; diff --git a/arch/arm/dts/zynqmp-zcu216-revA.dts b/arch/arm/dts/zynqmp-zcu216-revA.dts index c294e1b51a..f3b5edfeb4 100644 --- a/arch/arm/dts/zynqmp-zcu216-revA.dts +++ b/arch/arm/dts/zynqmp-zcu216-revA.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP ZCU216 * - * (C) Copyright 2017 - 2019, Xilinx, Inc. + * (C) Copyright 2017 - 2020, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> */ @@ -50,7 +50,7 @@ label = "sw19"; gpios = <&gpio 22 GPIO_ACTIVE_HIGH>; linux,code = <KEY_DOWN>; - gpio-key,wakeup; + wakeup-source; autorepeat; }; }; @@ -567,6 +567,10 @@ &sdhci1 { status = "okay"; disable-wp; + /* + * This property should be removed for supporting UHS mode + */ + no-1-8-v; xlnx,mio_bank = <1>; }; diff --git a/arch/arm/dts/zynqmp.dtsi b/arch/arm/dts/zynqmp.dtsi index 9e7fae83f7..1634af0bd8 100644 --- a/arch/arm/dts/zynqmp.dtsi +++ b/arch/arm/dts/zynqmp.dtsi @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP * - * (C) Copyright 2014 - 2015, Xilinx, Inc. + * (C) Copyright 2014 - 2020, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> * @@ -149,6 +149,11 @@ #power-domain-cells = <0x1>; u-boot,dm-pre-reloc; + zynqmp_pcap: pcap { + compatible = "xlnx,zynqmp-pcap-fpga"; + clock-names = "ref_clk"; + }; + zynqmp_power: zynqmp-power { u-boot,dm-pre-reloc; compatible = "xlnx,zynqmp-power"; @@ -162,6 +167,11 @@ compatible = "xlnx,zynqmp-reset"; #reset-cells = <1>; }; + + pinctrl0: pinctrl { + compatible = "xlnx,zynqmp-pinctrl"; + status = "disabled"; + }; }; }; @@ -180,9 +190,10 @@ fpga_full: fpga-full { compatible = "fpga-region"; - fpga-mgr = <&pcap>; + fpga-mgr = <&zynqmp_pcap>; #address-cells = <2>; #size-cells = <2>; + ranges; }; nvmem_firmware { @@ -195,63 +206,6 @@ }; }; - pcap: pcap { - compatible = "xlnx,zynqmp-pcap-fpga"; - }; - - rst: reset-controller { - compatible = "xlnx,zynqmp-reset"; - #reset-cells = <1>; - }; - - xlnx_dp_snd_card: dp_snd_card { - compatible = "xlnx,dp-snd-card"; - status = "disabled"; - xlnx,dp-snd-pcm = <&xlnx_dp_snd_pcm0>, <&xlnx_dp_snd_pcm1>; - xlnx,dp-snd-codec = <&xlnx_dp_snd_codec0>; - }; - - xlnx_dp_snd_codec0: dp_snd_codec0 { - compatible = "xlnx,dp-snd-codec"; - status = "disabled"; - clock-names = "aud_clk"; - }; - - xlnx_dp_snd_pcm0: dp_snd_pcm0 { - compatible = "xlnx,dp-snd-pcm"; - status = "disabled"; - dmas = <&xlnx_dpdma 4>; - dma-names = "tx"; - }; - - xlnx_dp_snd_pcm1: dp_snd_pcm1 { - compatible = "xlnx,dp-snd-pcm"; - status = "disabled"; - dmas = <&xlnx_dpdma 5>; - dma-names = "tx"; - }; - - xilinx_drm: xilinx_drm { - compatible = "xlnx,drm"; - status = "disabled"; - xlnx,encoder-slave = <&xlnx_dp>; - xlnx,connector-type = "DisplayPort"; - xlnx,dp-sub = <&xlnx_dp_sub>; - planes { - xlnx,pixel-format = "rgb565"; - plane0 { - dmas = <&xlnx_dpdma 3>; - dma-names = "dma0"; - }; - plane1 { - dmas = <&xlnx_dpdma 0>, - <&xlnx_dpdma 1>, - <&xlnx_dpdma 2>; - dma-names = "dma0", "dma1", "dma2"; - }; - }; - }; - amba_apu: amba-apu@0 { compatible = "simple-bus"; #address-cells = <2>; @@ -259,7 +213,7 @@ ranges = <0 0 0 0 0xffffffff>; gic: interrupt-controller@f9010000 { - compatible = "arm,gic-400", "arm,cortex-a15-gic"; + compatible = "arm,gic-400"; #interrupt-cells = <3>; reg = <0x0 0xf9010000 0x10000>, <0x0 0xf9020000 0x20000>, @@ -794,6 +748,8 @@ power-domains = <&zynqmp_firmware PD_SD_0>; nvmem-cells = <&soc_revision>; nvmem-cell-names = "soc_revision"; + #clock-cells = <1>; + clock-output-names = "clk_out_sd0", "clk_in_sd0"; }; sdhci1: mmc@ff170000 { @@ -810,12 +766,8 @@ power-domains = <&zynqmp_firmware PD_SD_1>; nvmem-cells = <&soc_revision>; nvmem-cell-names = "soc_revision"; - }; - - pinctrl0: pinctrl@ff180000 { - compatible = "xlnx,pinctrl-zynqmp"; - status = "disabled"; - reg = <0x0 0xff180000 0x0 0x1000>; + #clock-cells = <1>; + clock-output-names = "clk_out_sd1", "clk_in_sd1"; }; smmu: smmu@fd800000 { @@ -1015,37 +967,6 @@ }; }; - xlnx_dp: dp@fd4a0000 { - compatible = "xlnx,v-dp"; - status = "disabled"; - reg = <0x0 0xfd4a0000 0x0 0x1000>; - interrupts = <0 119 4>; - interrupt-parent = <&gic>; - clock-names = "aclk", "aud_clk"; - xlnx,dp-version = "v1.2"; - xlnx,max-lanes = <2>; - xlnx,max-link-rate = <540000>; - xlnx,max-bpc = <16>; - xlnx,enable-ycrcb; - xlnx,colormetry = "rgb"; - xlnx,bpc = <8>; - xlnx,audio-chan = <2>; - xlnx,dp-sub = <&xlnx_dp_sub>; - xlnx,max-pclock-frequency = <300000>; - }; - - xlnx_dp_sub: dp_sub@fd4aa000 { - compatible = "xlnx,dp-sub"; - status = "disabled"; - reg = <0x0 0xfd4aa000 0x0 0x1000>, - <0x0 0xfd4ab000 0x0 0x1000>, - <0x0 0xfd4ac000 0x0 0x1000>; - reg-names = "blend", "av_buf", "aud"; - xlnx,output-fmt = "rgb"; - xlnx,vid-fmt = "yuyv"; - xlnx,gfx-fmt = "rgb565"; - }; - xlnx_dpdma: dma@fd4c0000 { compatible = "xlnx,dpdma"; status = "disabled"; @@ -1075,5 +996,62 @@ compatible = "xlnx,audio1"; }; }; + + zynqmp_dpsub: zynqmp-display@fd4a0000 { + compatible = "xlnx,zynqmp-dpsub-1.7"; + status = "disabled"; + reg = <0x0 0xfd4a0000 0x0 0x1000>, + <0x0 0xfd4aa000 0x0 0x1000>, + <0x0 0xfd4ab000 0x0 0x1000>, + <0x0 0xfd4ac000 0x0 0x1000>; + reg-names = "dp", "blend", "av_buf", "aud"; + interrupts = <0 119 4>; + interrupt-parent = <&gic>; + + clock-names = "dp_apb_clk", "dp_aud_clk", + "dp_vtc_pixel_clk_in"; + + power-domains = <&zynqmp_firmware PD_DP>; + + vid-layer { + dma-names = "vid0", "vid1", "vid2"; + dmas = <&xlnx_dpdma 0>, + <&xlnx_dpdma 1>, + <&xlnx_dpdma 2>; + }; + + gfx-layer { + dma-names = "gfx0"; + dmas = <&xlnx_dpdma 3>; + }; + + /* dummy node to indicate there's no child i2c device */ + i2c-bus { + }; + + zynqmp_dp_snd_codec0: zynqmp_dp_snd_codec0 { + compatible = "xlnx,dp-snd-codec"; + clock-names = "aud_clk"; + }; + + zynqmp_dp_snd_pcm0: zynqmp_dp_snd_pcm0 { + compatible = "xlnx,dp-snd-pcm"; + dmas = <&xlnx_dpdma 4>; + dma-names = "tx"; + }; + + zynqmp_dp_snd_pcm1: zynqmp_dp_snd_pcm1 { + compatible = "xlnx,dp-snd-pcm"; + dmas = <&xlnx_dpdma 5>; + dma-names = "tx"; + }; + + zynqmp_dp_snd_card0: zynqmp_dp_snd_card { + compatible = "xlnx,dp-snd-card"; + xlnx,dp-snd-pcm = <&zynqmp_dp_snd_pcm0>, + <&zynqmp_dp_snd_pcm1>; + xlnx,dp-snd-codec = <&zynqmp_dp_snd_codec0>; + }; + }; }; }; diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index 8a81c07881..6eca8db6d5 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -135,6 +135,6 @@ source "board/davinci/da8xxevm/Kconfig" source "board/lego/ev3/Kconfig" config SPL_LDSCRIPT - default "board/$(BOARDDIR)/u-boot-spl-da850evm.lds" + default "board/davinci/da8xxevm/u-boot-spl-da850evm.lds" endif diff --git a/arch/arm/mach-imx/imx_bootaux.c b/arch/arm/mach-imx/imx_bootaux.c index 21e96f8c88..ec0da1164f 100644 --- a/arch/arm/mach-imx/imx_bootaux.c +++ b/arch/arm/mach-imx/imx_bootaux.c @@ -12,70 +12,6 @@ #include <linux/compiler.h> #include <cpu_func.h> -#ifndef CONFIG_IMX8M -const __weak struct rproc_att hostmap[] = { }; - -static const struct rproc_att *get_host_mapping(unsigned long auxcore) -{ - const struct rproc_att *mmap = hostmap; - - while (mmap && mmap->size) { - if (mmap->da <= auxcore && - mmap->da + mmap->size > auxcore) - return mmap; - mmap++; - } - - return NULL; -} - -/* - * A very simple elf loader, assumes the image is valid, returns the - * entry point address. - */ -static unsigned long load_elf_image_phdr(unsigned long addr) -{ - Elf32_Ehdr *ehdr; /* ELF header structure pointer */ - Elf32_Phdr *phdr; /* Program header structure pointer */ - int i; - - ehdr = (Elf32_Ehdr *)addr; - phdr = (Elf32_Phdr *)(addr + ehdr->e_phoff); - - /* Load each program header */ - for (i = 0; i < ehdr->e_phnum; ++i, ++phdr) { - const struct rproc_att *mmap = get_host_mapping(phdr->p_paddr); - void *dst, *src; - - if (phdr->p_type != PT_LOAD) - continue; - - if (!mmap) { - printf("Invalid aux core address: %08x", - phdr->p_paddr); - return 0; - } - - dst = (void *)(phdr->p_paddr - mmap->da) + mmap->sa; - src = (void *)addr + phdr->p_offset; - - debug("Loading phdr %i to 0x%p (%i bytes)\n", - i, dst, phdr->p_filesz); - - if (phdr->p_filesz) - memcpy(dst, src, phdr->p_filesz); - if (phdr->p_filesz != phdr->p_memsz) - memset(dst + phdr->p_filesz, 0x00, - phdr->p_memsz - phdr->p_filesz); - flush_cache((unsigned long)dst & - ~(CONFIG_SYS_CACHELINE_SIZE - 1), - ALIGN(phdr->p_filesz, CONFIG_SYS_CACHELINE_SIZE)); - } - - return ehdr->e_entry; -} -#endif - int arch_auxiliary_core_up(u32 core_id, ulong addr) { ulong stack, pc; diff --git a/arch/arm/mach-k3/Kconfig b/arch/arm/mach-k3/Kconfig index 8f4272286c..a13cbef9b5 100644 --- a/arch/arm/mach-k3/Kconfig +++ b/arch/arm/mach-k3/Kconfig @@ -126,6 +126,14 @@ config K3_SYSFW_IMAGE_SIZE_MAX tree blob. Keep it as tight as possible, as this directly affects the overall SPL memory footprint. +config K3_SYSFW_IMAGE_SPI_OFFS + hex "SPI offset of SYSFW firmware and configuration blob" + depends on K3_LOAD_SYSFW + default 0x6C0000 + help + Offset of the combined System Firmware and configuration image tree + blob to be loaded when booting from a SPI flash memory. + config SYS_K3_SPL_ATF bool "Start Cortex-A from SPL" depends on SPL && CPU_V7R diff --git a/arch/arm/mach-k3/am6_init.c b/arch/arm/mach-k3/am6_init.c index d0b10e58ad..3768bccafa 100644 --- a/arch/arm/mach-k3/am6_init.c +++ b/arch/arm/mach-k3/am6_init.c @@ -161,10 +161,8 @@ void board_init_f(ulong dummy) pinctrl_select_state(dev, "default"); /* - * Load, start up, and configure system controller firmware. Provide - * the U-Boot console init function to the SYSFW post-PM configuration - * callback hook, effectively switching on (or over) the console - * output. + * Load, start up, and configure system controller firmware while + * also populating the SYSFW post-PM configuration callback hook. */ k3_sysfw_loader(k3_mmc_stop_clock, k3_mmc_restart_clock); @@ -181,6 +179,9 @@ void board_init_f(ulong dummy) preloader_console_init(); #endif + /* Output System Firmware version info */ + k3_sysfw_print_ver(); + /* Perform EEPROM-based board detection */ do_board_detect(); diff --git a/arch/arm/mach-k3/arm64-mmu.c b/arch/arm/mach-k3/arm64-mmu.c index 7f908eee80..95f830b7ff 100644 --- a/arch/arm/mach-k3/arm64-mmu.c +++ b/arch/arm/mach-k3/arm64-mmu.c @@ -50,6 +50,13 @@ struct mm_region am654_mem_map[NR_MMU_REGIONS] = { .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) | PTE_BLOCK_INNER_SHARE }, { + .virt = 0x500000000UL, + .phys = 0x500000000UL, + .size = 0x400000000UL, + .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | + PTE_BLOCK_NON_SHARE | + PTE_BLOCK_PXN | PTE_BLOCK_UXN + }, { /* List terminator */ 0, } @@ -60,7 +67,7 @@ struct mm_region *mem_map = am654_mem_map; #ifdef CONFIG_SOC_K3_J721E /* NR_DRAM_BANKS + 32bit IO + 64bit IO + terminator */ -#define NR_MMU_REGIONS (CONFIG_NR_DRAM_BANKS + 5) +#define NR_MMU_REGIONS (CONFIG_NR_DRAM_BANKS + 6) /* ToDo: Add 64bit IO */ struct mm_region j721e_mem_map[NR_MMU_REGIONS] = { @@ -103,6 +110,12 @@ struct mm_region j721e_mem_map[NR_MMU_REGIONS] = { PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN }, { + .virt = 0x4d80000000UL, + .phys = 0x4d80000000UL, + .size = 0x0002000000UL, + .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL_NC) | + PTE_BLOCK_INNER_SHARE + }, { /* List terminator */ 0, } diff --git a/arch/arm/mach-k3/common.c b/arch/arm/mach-k3/common.c index 7af60a7f2f..efd84ec7eb 100644 --- a/arch/arm/mach-k3/common.c +++ b/arch/arm/mach-k3/common.c @@ -17,6 +17,10 @@ #include <asm/arch/sys_proto.h> #include <asm/hardware.h> #include <asm/io.h> +#include <fs_loader.h> +#include <fs.h> +#include <env.h> +#include <elf.h> struct ti_sci_handle *get_ti_sci_handle(void) { @@ -31,6 +35,28 @@ struct ti_sci_handle *get_ti_sci_handle(void) return (struct ti_sci_handle *)ti_sci_get_handle_from_sysfw(dev); } +void k3_sysfw_print_ver(void) +{ + struct ti_sci_handle *ti_sci = get_ti_sci_handle(); + char fw_desc[sizeof(ti_sci->version.firmware_description) + 1]; + + /* + * Output System Firmware version info. Note that since the + * 'firmware_description' field is not guaranteed to be zero- + * terminated we manually add a \0 terminator if needed. Further + * note that we intentionally no longer rely on the extended + * printf() formatter '%.*s' to not having to require a more + * full-featured printf() implementation. + */ + strncpy(fw_desc, ti_sci->version.firmware_description, + sizeof(ti_sci->version.firmware_description)); + fw_desc[sizeof(fw_desc) - 1] = '\0'; + + printf("SYSFW ABI: %d.%d (firmware rev 0x%04x '%s')\n", + ti_sci->version.abi_major, ti_sci->version.abi_minor, + ti_sci->version.firmware_revision, fw_desc); +} + DECLARE_GLOBAL_DATA_PTR; #ifdef CONFIG_K3_EARLY_CONS @@ -58,23 +84,98 @@ int early_console_init(void) #endif #ifdef CONFIG_SYS_K3_SPL_ATF + +void init_env(void) +{ +#ifdef CONFIG_SPL_ENV_SUPPORT + char *part; + + env_init(); + env_relocate(); + switch (spl_boot_device()) { + case BOOT_DEVICE_MMC2: + part = env_get("bootpart"); + env_set("storage_interface", "mmc"); + env_set("fw_dev_part", part); + break; + case BOOT_DEVICE_SPI: + env_set("storage_interface", "ubi"); + env_set("fw_ubi_mtdpart", "UBI"); + env_set("fw_ubi_volume", "UBI0"); + break; + default: + printf("%s from device %u not supported!\n", + __func__, spl_boot_device()); + return; + } +#endif +} + +#ifdef CONFIG_FS_LOADER +int load_firmware(char *name_fw, char *name_loadaddr, u32 *loadaddr) +{ + struct udevice *fsdev; + char *name = NULL; + int size = 0; + + *loadaddr = 0; +#ifdef CONFIG_SPL_ENV_SUPPORT + switch (spl_boot_device()) { + case BOOT_DEVICE_MMC2: + name = env_get(name_fw); + *loadaddr = env_get_hex(name_loadaddr, *loadaddr); + break; + default: + printf("Loading rproc fw image from device %u not supported!\n", + spl_boot_device()); + return 0; + } +#endif + if (!*loadaddr) + return 0; + + if (!uclass_get_device(UCLASS_FS_FIRMWARE_LOADER, 0, &fsdev)) { + size = request_firmware_into_buf(fsdev, name, (void *)*loadaddr, + 0, 0); + } + + return size; +} +#else +int load_firmware(char *name_fw, char *name_loadaddr, u32 *loadaddr) +{ + return 0; +} +#endif + +__weak void start_non_linux_remote_cores(void) +{ +} + void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image) { + typedef void __noreturn (*image_entry_noargs_t)(void); struct ti_sci_handle *ti_sci = get_ti_sci_handle(); - int ret; + u32 loadaddr = 0; + int ret, size; /* Release all the exclusive devices held by SPL before starting ATF */ ti_sci->ops.dev_ops.release_exclusive_devices(ti_sci); + ret = rproc_init(); + if (ret) + panic("rproc failed to be initialized (%d)\n", ret); + + init_env(); + start_non_linux_remote_cores(); + size = load_firmware("name_mcur5f0_0fw", "addr_mcur5f0_0load", + &loadaddr); + + /* * It is assumed that remoteproc device 1 is the corresponding * Cortex-A core which runs ATF. Make sure DT reflects the same. */ - ret = rproc_dev_init(1); - if (ret) - panic("%s: ATF failed to initialize on rproc (%d)\n", __func__, - ret); - ret = rproc_load(1, spl_image->entry_point, 0x200); if (ret) panic("%s: ATF failed to load on rproc (%d)\n", __func__, ret); @@ -85,13 +186,18 @@ void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image) ret = rproc_start(1); if (ret) panic("%s: ATF failed to start on rproc (%d)\n", __func__, ret); + if (!(size > 0 && valid_elf_image(loadaddr))) { + debug("Shutting down...\n"); + release_resources_for_core_shutdown(); + + while (1) + asm volatile("wfe"); + } - debug("Releasing resources...\n"); - release_resources_for_core_shutdown(); + image_entry_noargs_t image_entry = + (image_entry_noargs_t)load_elf_image_phdr(loadaddr); - debug("Finalizing core shutdown...\n"); - while (1) - asm volatile("wfe"); + image_entry(); } #endif diff --git a/arch/arm/mach-k3/common.h b/arch/arm/mach-k3/common.h index d8b34fe060..b1cbe116ef 100644 --- a/arch/arm/mach-k3/common.h +++ b/arch/arm/mach-k3/common.h @@ -24,3 +24,6 @@ void setup_k3_mpu_regions(void); int early_console_init(void); void disable_linefill_optimization(void); void remove_fwl_configs(struct fwl_data *fwl_data, size_t fwl_data_size); +void start_non_linux_remote_cores(void); +int load_firmware(char *name_fw, char *name_loadaddr, u32 *loadaddr); +void k3_sysfw_print_ver(void); diff --git a/arch/arm/mach-k3/j721e_init.c b/arch/arm/mach-k3/j721e_init.c index 0994522f6c..f34090f9cc 100644 --- a/arch/arm/mach-k3/j721e_init.c +++ b/arch/arm/mach-k3/j721e_init.c @@ -19,6 +19,7 @@ #include <dm/uclass-internal.h> #include <dm/pinctrl.h> #include <mmc.h> +#include <remoteproc.h> #ifdef CONFIG_SPL_BUILD #ifdef CONFIG_K3_LOAD_SYSFW @@ -202,6 +203,9 @@ void board_init_f(ulong dummy) preloader_console_init(); #endif + /* Output System Firmware version info */ + k3_sysfw_print_ver(); + /* Perform EEPROM-based board detection */ do_board_detect(); @@ -326,3 +330,36 @@ void release_resources_for_core_shutdown(void) } } #endif + +#ifdef CONFIG_SYS_K3_SPL_ATF +void start_non_linux_remote_cores(void) +{ + int size = 0, ret; + u32 loadaddr = 0; + + size = load_firmware("name_mainr5f0_0fw", "addr_mainr5f0_0load", + &loadaddr); + if (size <= 0) + goto err_load; + + /* assuming remoteproc 2 is aliased for the needed remotecore */ + ret = rproc_load(2, loadaddr, size); + if (ret) { + printf("Firmware failed to start on rproc (%d)\n", ret); + goto err_load; + } + + ret = rproc_start(2); + if (ret) { + printf("Firmware init failed on rproc (%d)\n", ret); + goto err_load; + } + + printf("Remoteproc 2 started successfully\n"); + + return; + +err_load: + rproc_reset(2); +} +#endif diff --git a/arch/arm/mach-k3/r5_mpu.c b/arch/arm/mach-k3/r5_mpu.c index ee076ed877..3d2ff6775a 100644 --- a/arch/arm/mach-k3/r5_mpu.c +++ b/arch/arm/mach-k3/r5_mpu.c @@ -26,7 +26,9 @@ struct mpu_region_config k3_mpu_regions[16] = { /* U-Boot's code area marking it as WB and Write allocate */ {CONFIG_SYS_SDRAM_BASE, REGION_2, XN_DIS, PRIV_RW_USR_RW, O_I_WB_RD_WR_ALLOC, REGION_2GB}, - {0x0, 3, 0x0, 0x0, 0x0, 0x0}, + /* mcu_r5fss0_core0 BTCM area marking it as WB and Write allocate. */ + {0x41010000, 3, XN_DIS, PRIV_RW_USR_RW, O_I_WB_RD_WR_ALLOC, + REGION_8MB}, {0x0, 4, 0x0, 0x0, 0x0, 0x0}, {0x0, 5, 0x0, 0x0, 0x0, 0x0}, {0x0, 6, 0x0, 0x0, 0x0, 0x0}, diff --git a/arch/arm/mach-k3/sysfw-loader.c b/arch/arm/mach-k3/sysfw-loader.c index db02607b17..4f5c848245 100644 --- a/arch/arm/mach-k3/sysfw-loader.c +++ b/arch/arm/mach-k3/sysfw-loader.c @@ -14,6 +14,8 @@ #include <g_dnl.h> #include <usb.h> #include <dfu.h> +#include <dm/uclass-internal.h> +#include <spi_flash.h> #include <asm/arch/sys_proto.h> #include "common.h" @@ -197,13 +199,33 @@ exit: } #endif +#if CONFIG_IS_ENABLED(SPI_LOAD) +static void *k3_sysfw_get_spi_addr(void) +{ + struct udevice *dev; + fdt_addr_t addr; + int ret; + + ret = uclass_find_device_by_seq(UCLASS_SPI, CONFIG_SF_DEFAULT_BUS, + true, &dev); + if (ret) + return NULL; + + addr = dev_read_addr_index(dev, 1); + if (addr == FDT_ADDR_T_NONE) + return NULL; + + return (void *)(addr + CONFIG_K3_SYSFW_IMAGE_SPI_OFFS); +} +#endif + void k3_sysfw_loader(void (*config_pm_pre_callback) (void), void (*config_pm_done_callback)(void)) { struct spl_image_info spl_image = { 0 }; struct spl_boot_device bootdev = { 0 }; struct ti_sci_handle *ti_sci; - int ret; + int ret = 0; /* Reserve a block of aligned memory for loading the SYSFW image */ sysfw_load_address = memalign(ARCH_DMA_MINALIGN, @@ -244,6 +266,13 @@ void k3_sysfw_loader(void (*config_pm_pre_callback) (void), #endif break; #endif +#if CONFIG_IS_ENABLED(SPI_LOAD) + case BOOT_DEVICE_SPI: + sysfw_load_address = k3_sysfw_get_spi_addr(); + if (!sysfw_load_address) + ret = -ENODEV; + break; +#endif #if CONFIG_IS_ENABLED(YMODEM_SUPPORT) case BOOT_DEVICE_UART: #ifdef CONFIG_K3_EARLY_CONS @@ -305,22 +334,4 @@ void k3_sysfw_loader(void (*config_pm_pre_callback) (void), */ if (config_pm_done_callback) config_pm_done_callback(); - - /* - * Output System Firmware version info. Note that since the - * 'firmware_description' field is not guaranteed to be zero- - * terminated we manually add a \0 terminator if needed. Further - * note that we intentionally no longer rely on the extended - * printf() formatter '%.*s' to not having to require a more - * full-featured printf() implementation. - */ - char fw_desc[sizeof(ti_sci->version.firmware_description) + 1]; - - strncpy(fw_desc, ti_sci->version.firmware_description, - sizeof(ti_sci->version.firmware_description)); - fw_desc[sizeof(fw_desc) - 1] = '\0'; - - printf("SYSFW ABI: %d.%d (firmware rev 0x%04x '%s')\n", - ti_sci->version.abi_major, ti_sci->version.abi_minor, - ti_sci->version.firmware_revision, fw_desc); } diff --git a/arch/arm/mach-omap2/am33xx/clock_am33xx.c b/arch/arm/mach-omap2/am33xx/clock_am33xx.c index f2cd496607..2427933c8b 100644 --- a/arch/arm/mach-omap2/am33xx/clock_am33xx.c +++ b/arch/arm/mach-omap2/am33xx/clock_am33xx.c @@ -226,6 +226,10 @@ void enable_basic_clocks(void) &cmper->usb0clkctrl, &cmper->emiffwclkctrl, &cmper->emifclkctrl, +#if CONFIG_IS_ENABLED(AM335X_LCD) + &cmper->lcdclkctrl, + &cmper->lcdcclkstctrl, +#endif 0 }; diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig index 2984a3edda..7644b8dc85 100644 --- a/arch/arm/mach-orion5x/Kconfig +++ b/arch/arm/mach-orion5x/Kconfig @@ -15,7 +15,4 @@ config SYS_SOC source "board/LaCie/edminiv2/Kconfig" -config SPL_LDSCRIPT - default "$(CPUDIR)/orion5x/u-boot-spl.lds" if ORION5X - endif diff --git a/arch/arm/mach-stm32mp/bsec.c b/arch/arm/mach-stm32mp/bsec.c index a77c706a1a..3b923f088e 100644 --- a/arch/arm/mach-stm32mp/bsec.c +++ b/arch/arm/mach-stm32mp/bsec.c @@ -12,8 +12,6 @@ #include <linux/iopoll.h> #define BSEC_OTP_MAX_VALUE 95 - -#ifndef CONFIG_STM32MP1_TRUSTED #define BSEC_TIMEOUT_US 10000 /* BSEC REGISTER OFFSET (base relative) */ @@ -24,9 +22,10 @@ #define BSEC_OTP_LOCK_OFF 0x010 #define BSEC_DISTURBED_OFF 0x01C #define BSEC_ERROR_OFF 0x034 -#define BSEC_SPLOCK_OFF 0x064 /* Program safmem sticky lock */ -#define BSEC_SWLOCK_OFF 0x07C /* write in OTP sticky lock */ -#define BSEC_SRLOCK_OFF 0x094 /* shadowing sticky lock */ +#define BSEC_WRLOCK_OFF 0x04C /* OTP write permananet lock */ +#define BSEC_SPLOCK_OFF 0x064 /* OTP write sticky lock */ +#define BSEC_SWLOCK_OFF 0x07C /* shadow write sticky lock */ +#define BSEC_SRLOCK_OFF 0x094 /* shadow read sticky lock */ #define BSEC_OTP_DATA_OFF 0x200 /* BSEC_CONFIGURATION Register MASK */ @@ -53,12 +52,12 @@ #define BSEC_LOCK_PROGRAM 0x04 /** - * bsec_check_error() - Check status of one otp - * @base: base address of bsec IP + * bsec_lock() - manage lock for each type SR/SP/SW + * @address: address of bsec IP register * @otp: otp number (0 - BSEC_OTP_MAX_VALUE) - * Return: 0 if no error, -EAGAIN or -ENOTSUPP + * Return: true if locked else false */ -static u32 bsec_check_error(u32 base, u32 otp) +static bool bsec_read_lock(u32 address, u32 otp) { u32 bit; u32 bank; @@ -66,21 +65,17 @@ static u32 bsec_check_error(u32 base, u32 otp) bit = 1 << (otp & OTP_LOCK_MASK); bank = ((otp >> OTP_LOCK_BANK_SHIFT) & OTP_LOCK_MASK) * sizeof(u32); - if (readl(base + BSEC_DISTURBED_OFF + bank) & bit) - return -EAGAIN; - else if (readl(base + BSEC_ERROR_OFF + bank) & bit) - return -ENOTSUPP; - - return 0; + return !!(readl(address + bank) & bit); } +#ifndef CONFIG_STM32MP1_TRUSTED /** - * bsec_lock() - manage lock for each type SR/SP/SW - * @address: address of bsec IP register + * bsec_check_error() - Check status of one otp + * @base: base address of bsec IP * @otp: otp number (0 - BSEC_OTP_MAX_VALUE) - * Return: true if locked else false + * Return: 0 if no error, -EAGAIN or -ENOTSUPP */ -static bool bsec_read_lock(u32 address, u32 otp) +static u32 bsec_check_error(u32 base, u32 otp) { u32 bit; u32 bank; @@ -88,7 +83,12 @@ static bool bsec_read_lock(u32 address, u32 otp) bit = 1 << (otp & OTP_LOCK_MASK); bank = ((otp >> OTP_LOCK_BANK_SHIFT) & OTP_LOCK_MASK) * sizeof(u32); - return !!(readl(address + bank) & bit); + if (readl(base + BSEC_DISTURBED_OFF + bank) & bit) + return -EAGAIN; + else if (readl(base + BSEC_ERROR_OFF + bank) & bit) + return -ENOTSUPP; + + return 0; } /** @@ -324,6 +324,16 @@ static int stm32mp_bsec_read_shadow(struct udevice *dev, u32 *val, u32 otp) #endif } +static int stm32mp_bsec_read_lock(struct udevice *dev, u32 *val, u32 otp) +{ + struct stm32mp_bsec_platdata *plat = dev_get_platdata(dev); + + /* return OTP permanent write lock status */ + *val = bsec_read_lock(plat->base + BSEC_WRLOCK_OFF, otp); + + return 0; +} + static int stm32mp_bsec_write_otp(struct udevice *dev, u32 val, u32 otp) { #ifdef CONFIG_STM32MP1_TRUSTED @@ -350,22 +360,41 @@ static int stm32mp_bsec_write_shadow(struct udevice *dev, u32 val, u32 otp) #endif } +static int stm32mp_bsec_write_lock(struct udevice *dev, u32 val, u32 otp) +{ +#ifdef CONFIG_STM32MP1_TRUSTED + if (val == 1) + return stm32_smc_exec(STM32_SMC_BSEC, + STM32_SMC_WRLOCK_OTP, + otp, 0); + if (val == 0) + return 0; /* nothing to do */ + + return -EINVAL; +#else + return -ENOTSUPP; +#endif +} + static int stm32mp_bsec_read(struct udevice *dev, int offset, void *buf, int size) { int ret; int i; - bool shadow = true; + bool shadow = true, lock = false; int nb_otp = size / sizeof(u32); int otp; unsigned int offs = offset; - if (offs >= STM32_BSEC_OTP_OFFSET) { + if (offs >= STM32_BSEC_LOCK_OFFSET) { + offs -= STM32_BSEC_LOCK_OFFSET; + lock = true; + } else if (offs >= STM32_BSEC_OTP_OFFSET) { offs -= STM32_BSEC_OTP_OFFSET; shadow = false; } - if (offs < 0 || (offs % 4) || (size % 4)) + if ((offs % 4) || (size % 4)) return -EINVAL; otp = offs / sizeof(u32); @@ -373,7 +402,9 @@ static int stm32mp_bsec_read(struct udevice *dev, int offset, for (i = otp; i < (otp + nb_otp) && i <= BSEC_OTP_MAX_VALUE; i++) { u32 *addr = &((u32 *)buf)[i - otp]; - if (shadow) + if (lock) + ret = stm32mp_bsec_read_lock(dev, addr, i); + else if (shadow) ret = stm32mp_bsec_read_shadow(dev, addr, i); else ret = stm32mp_bsec_read_otp(dev, addr, i); @@ -392,17 +423,20 @@ static int stm32mp_bsec_write(struct udevice *dev, int offset, { int ret = 0; int i; - bool shadow = true; + bool shadow = true, lock = false; int nb_otp = size / sizeof(u32); int otp; unsigned int offs = offset; - if (offs >= STM32_BSEC_OTP_OFFSET) { + if (offs >= STM32_BSEC_LOCK_OFFSET) { + offs -= STM32_BSEC_LOCK_OFFSET; + lock = true; + } else if (offs >= STM32_BSEC_OTP_OFFSET) { offs -= STM32_BSEC_OTP_OFFSET; shadow = false; } - if (offs < 0 || (offs % 4) || (size % 4)) + if ((offs % 4) || (size % 4)) return -EINVAL; otp = offs / sizeof(u32); @@ -410,7 +444,9 @@ static int stm32mp_bsec_write(struct udevice *dev, int offset, for (i = otp; i < otp + nb_otp && i <= BSEC_OTP_MAX_VALUE; i++) { u32 *val = &((u32 *)buf)[i - otp]; - if (shadow) + if (lock) + ret = stm32mp_bsec_write_lock(dev, *val, i); + else if (shadow) ret = stm32mp_bsec_write_shadow(dev, *val, i); else ret = stm32mp_bsec_write_otp(dev, *val, i); diff --git a/arch/arm/mach-stm32mp/cpu.c b/arch/arm/mach-stm32mp/cpu.c index ea0bd94605..9aa5794334 100644 --- a/arch/arm/mach-stm32mp/cpu.c +++ b/arch/arm/mach-stm32mp/cpu.c @@ -61,12 +61,6 @@ #define BOOTROM_INSTANCE_MASK GENMASK(31, 16) #define BOOTROM_INSTANCE_SHIFT 16 -/* BSEC OTP index */ -#define BSEC_OTP_RPN 1 -#define BSEC_OTP_SERIAL 13 -#define BSEC_OTP_PKG 16 -#define BSEC_OTP_MAC 57 - /* Device Part Number (RPN) = OTP_DATA1 lower 8 bits */ #define RPN_SHIFT 0 #define RPN_MASK GENMASK(7, 0) @@ -285,25 +279,42 @@ u32 get_cpu_package(void) return get_otp(BSEC_OTP_PKG, PKG_SHIFT, PKG_MASK); } -#if defined(CONFIG_DISPLAY_CPUINFO) -int print_cpuinfo(void) +void get_soc_name(char name[SOC_NAME_SIZE]) { char *cpu_s, *cpu_r, *pkg; /* MPUs Part Numbers */ switch (get_cpu_type()) { + case CPU_STM32MP157Fxx: + cpu_s = "157F"; + break; + case CPU_STM32MP157Dxx: + cpu_s = "157D"; + break; case CPU_STM32MP157Cxx: cpu_s = "157C"; break; case CPU_STM32MP157Axx: cpu_s = "157A"; break; + case CPU_STM32MP153Fxx: + cpu_s = "153F"; + break; + case CPU_STM32MP153Dxx: + cpu_s = "153D"; + break; case CPU_STM32MP153Cxx: cpu_s = "153C"; break; case CPU_STM32MP153Axx: cpu_s = "153A"; break; + case CPU_STM32MP151Fxx: + cpu_s = "151F"; + break; + case CPU_STM32MP151Dxx: + cpu_s = "151D"; + break; case CPU_STM32MP151Cxx: cpu_s = "151C"; break; @@ -350,7 +361,16 @@ int print_cpuinfo(void) break; } - printf("CPU: STM32MP%s%s Rev.%s\n", cpu_s, pkg, cpu_r); + snprintf(name, SOC_NAME_SIZE, "STM32MP%s%s Rev.%s", cpu_s, pkg, cpu_r); +} + +#if defined(CONFIG_DISPLAY_CPUINFO) +int print_cpuinfo(void) +{ + char name[SOC_NAME_SIZE]; + + get_soc_name(name); + printf("CPU: %s\n", name); return 0; } diff --git a/arch/arm/mach-stm32mp/fdt.c b/arch/arm/mach-stm32mp/fdt.c index 82c430b7c7..3ee7d6a833 100644 --- a/arch/arm/mach-stm32mp/fdt.c +++ b/arch/arm/mach-stm32mp/fdt.c @@ -23,6 +23,12 @@ #define ETZPC_RESERVED 0xffffffff +#define STM32_FDCAN_BASE 0x4400e000 +#define STM32_CRYP2_BASE 0x4c005000 +#define STM32_CRYP1_BASE 0x54001000 +#define STM32_GPU_BASE 0x59000000 +#define STM32_DSI_BASE 0x5a000000 + static const u32 stm32mp1_ip_addr[] = { 0x5c008000, /* 00 stgenc */ 0x54000000, /* 01 bkpsram */ @@ -33,7 +39,7 @@ static const u32 stm32mp1_ip_addr[] = { ETZPC_RESERVED, /* 06 reserved */ 0x54003000, /* 07 rng1 */ 0x54002000, /* 08 hash1 */ - 0x54001000, /* 09 cryp1 */ + STM32_CRYP1_BASE, /* 09 cryp1 */ 0x5a003000, /* 0A ddrctrl */ 0x5a004000, /* 0B ddrphyc */ 0x5c009000, /* 0C i2c6 */ @@ -86,7 +92,7 @@ static const u32 stm32mp1_ip_addr[] = { 0x4400b000, /* 3B sai2 */ 0x4400c000, /* 3C sai3 */ 0x4400d000, /* 3D dfsdm */ - 0x4400e000, /* 3E tt_fdcan */ + STM32_FDCAN_BASE, /* 3E tt_fdcan */ ETZPC_RESERVED, /* 3F reserved */ 0x50021000, /* 40 lptim2 */ 0x50022000, /* 41 lptim3 */ @@ -99,7 +105,7 @@ static const u32 stm32mp1_ip_addr[] = { 0x48003000, /* 48 adc */ 0x4c002000, /* 49 hash2 */ 0x4c003000, /* 4A rng2 */ - 0x4c005000, /* 4B cryp2 */ + STM32_CRYP2_BASE, /* 4B cryp2 */ ETZPC_RESERVED, /* 4C reserved */ ETZPC_RESERVED, /* 4D reserved */ ETZPC_RESERVED, /* 4E reserved */ @@ -126,11 +132,13 @@ static const u32 stm32mp1_ip_addr[] = { static bool fdt_disable_subnode_by_address(void *fdt, int offset, u32 addr) { int node; + fdt_addr_t regs; for (node = fdt_first_subnode(fdt, offset); node >= 0; node = fdt_next_subnode(fdt, node)) { - if (addr == (u32)fdt_getprop(fdt, node, "reg", 0)) { + regs = fdtdec_get_addr(fdt, node, "reg"); + if (addr == regs) { if (fdtdec_get_is_enabled(fdt, node)) { fdt_status_disabled(fdt, node); @@ -143,11 +151,11 @@ static bool fdt_disable_subnode_by_address(void *fdt, int offset, u32 addr) return false; } -static int stm32_fdt_fixup_etzpc(void *fdt) +static int stm32_fdt_fixup_etzpc(void *fdt, int soc_node) { const u32 *array; int array_size, i; - int soc_node, offset, shift; + int offset, shift; u32 addr, status, decprot[ETZPC_DECPROT_NB]; array = stm32mp1_ip_addr; @@ -156,10 +164,6 @@ static int stm32_fdt_fixup_etzpc(void *fdt) for (i = 0; i < ETZPC_DECPROT_NB; i++) decprot[i] = readl(ETZPC_DECPROT(i)); - soc_node = fdt_path_offset(fdt, "/soc"); - if (soc_node < 0) - return soc_node; - for (i = 0; i < array_size; i++) { offset = i / NB_PROT_PER_REG; shift = (i % NB_PROT_PER_REG) * DECPROT_NB_BITS; @@ -180,6 +184,40 @@ static int stm32_fdt_fixup_etzpc(void *fdt) return 0; } +/* deactivate all the cpu except core 0 */ +static void stm32_fdt_fixup_cpu(void *blob, char *name) +{ + int off; + u32 reg; + + off = fdt_path_offset(blob, "/cpus"); + if (off < 0) { + printf("%s: couldn't find /cpus node\n", __func__); + return; + } + + off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4); + while (off != -FDT_ERR_NOTFOUND) { + reg = fdtdec_get_addr(blob, off, "reg"); + if (reg != 0) { + fdt_del_node(blob, off); + printf("FDT: cpu %d node remove for %s\n", reg, name); + /* after delete we can't trust the offsets anymore */ + off = -1; + } + off = fdt_node_offset_by_prop_value(blob, off, + "device_type", "cpu", 4); + } +} + +static void stm32_fdt_disable(void *fdt, int offset, u32 addr, + const char *string, const char *name) +{ + if (fdt_disable_subnode_by_address(fdt, offset, addr)) + printf("FDT: %s@%08x node disabled for %s\n", + string, addr, name); +} + /* * This function is called right before the kernel is booted. "blob" is the * device tree that will be passed to the kernel. @@ -187,14 +225,59 @@ static int stm32_fdt_fixup_etzpc(void *fdt) int ft_system_setup(void *blob, bd_t *bd) { int ret = 0; - u32 pkg; + int soc; + u32 pkg, cpu; + char name[SOC_NAME_SIZE]; + + soc = fdt_path_offset(blob, "/soc"); + if (soc < 0) + return soc; if (CONFIG_IS_ENABLED(STM32_ETZPC)) { - ret = stm32_fdt_fixup_etzpc(blob); + ret = stm32_fdt_fixup_etzpc(blob, soc); if (ret) return ret; } + /* MPUs Part Numbers and name*/ + cpu = get_cpu_type(); + get_soc_name(name); + + switch (cpu) { + case CPU_STM32MP151Fxx: + case CPU_STM32MP151Dxx: + case CPU_STM32MP151Cxx: + case CPU_STM32MP151Axx: + stm32_fdt_fixup_cpu(blob, name); + /* after cpu delete we can't trust the soc offsets anymore */ + soc = fdt_path_offset(blob, "/soc"); + stm32_fdt_disable(blob, soc, STM32_FDCAN_BASE, "can", name); + /* fall through */ + case CPU_STM32MP153Fxx: + case CPU_STM32MP153Dxx: + case CPU_STM32MP153Cxx: + case CPU_STM32MP153Axx: + stm32_fdt_disable(blob, soc, STM32_GPU_BASE, "gpu", name); + stm32_fdt_disable(blob, soc, STM32_DSI_BASE, "dsi", name); + break; + default: + break; + } + + switch (cpu) { + case CPU_STM32MP157Dxx: + case CPU_STM32MP157Axx: + case CPU_STM32MP153Dxx: + case CPU_STM32MP153Axx: + case CPU_STM32MP151Dxx: + case CPU_STM32MP151Axx: + stm32_fdt_disable(blob, soc, STM32_CRYP1_BASE, "cryp", name); + stm32_fdt_disable(blob, soc, STM32_CRYP2_BASE, "cryp", name); + break; + default: + break; + } + switch (get_cpu_package()) { case PKG_AA_LBGA448: pkg = STM32MP_PKG_AA; diff --git a/arch/arm/mach-stm32mp/include/mach/ddr.h b/arch/arm/mach-stm32mp/include/mach/ddr.h index b8a17cfbdd..bfc42a7c48 100644 --- a/arch/arm/mach-stm32mp/include/mach/ddr.h +++ b/arch/arm/mach-stm32mp/include/mach/ddr.h @@ -9,8 +9,10 @@ /* DDR power initializations */ enum ddr_type { STM32MP_DDR3, - STM32MP_LPDDR2, - STM32MP_LPDDR3, + STM32MP_LPDDR2_16, + STM32MP_LPDDR2_32, + STM32MP_LPDDR3_16, + STM32MP_LPDDR3_32, }; int board_ddr_power_init(enum ddr_type ddr_type); diff --git a/arch/arm/mach-stm32mp/include/mach/stm32.h b/arch/arm/mach-stm32mp/include/mach/stm32.h index f0636005e5..6daf9f7121 100644 --- a/arch/arm/mach-stm32mp/include/mach/stm32.h +++ b/arch/arm/mach-stm32mp/include/mach/stm32.h @@ -119,7 +119,14 @@ enum forced_boot_mode { #define STM32_BSEC_SHADOW(id) (STM32_BSEC_SHADOW_OFFSET + (id) * 4) #define STM32_BSEC_OTP_OFFSET 0x80000000 #define STM32_BSEC_OTP(id) (STM32_BSEC_OTP_OFFSET + (id) * 4) - +#define STM32_BSEC_LOCK_OFFSET 0xC0000000 +#define STM32_BSEC_LOCK(id) (STM32_BSEC_LOCK_OFFSET + (id) * 4) + +/* BSEC OTP index */ +#define BSEC_OTP_RPN 1 +#define BSEC_OTP_SERIAL 13 +#define BSEC_OTP_PKG 16 +#define BSEC_OTP_MAC 57 #define BSEC_OTP_BOARD 59 #endif /* __ASSEMBLY__*/ diff --git a/arch/arm/mach-stm32mp/include/mach/stm32mp1_smc.h b/arch/arm/mach-stm32mp/include/mach/stm32mp1_smc.h index 8130546b27..4ad14f963b 100644 --- a/arch/arm/mach-stm32mp/include/mach/stm32mp1_smc.h +++ b/arch/arm/mach-stm32mp/include/mach/stm32mp1_smc.h @@ -27,6 +27,7 @@ #define STM32_SMC_READ_OTP 0x04 #define STM32_SMC_READ_ALL 0x05 #define STM32_SMC_WRITE_ALL 0x06 +#define STM32_SMC_WRLOCK_OTP 0x07 /* SMC error codes */ #define STM32_SMC_OK 0x0 @@ -45,8 +46,8 @@ static inline u32 stm32_smc(u32 svc, u8 op, u32 data1, u32 data2, u32 *result) arm_smccc_smc(svc, op, data1, data2, 0, 0, 0, 0, &res); if (res.a0) { - pr_err("%s: Failed to exec in secure mode (err = %ld)\n", - __func__, res.a0); + pr_err("%s: Failed to exec svc=%x op=%x in secure mode (err = %ld)\n", + __func__, svc, op, res.a0); return -EINVAL; } if (result) diff --git a/arch/arm/mach-stm32mp/include/mach/sys_proto.h b/arch/arm/mach-stm32mp/include/mach/sys_proto.h index da46c11573..1617126bea 100644 --- a/arch/arm/mach-stm32mp/include/mach/sys_proto.h +++ b/arch/arm/mach-stm32mp/include/mach/sys_proto.h @@ -3,13 +3,19 @@ * Copyright (C) 2015-2017, STMicroelectronics - All Rights Reserved */ -/* ID = Device Version (bit31:16) + Device Part Number (RPN) (bit15:0)*/ +/* ID = Device Version (bit31:16) + Device Part Number (RPN) (bit7:0) */ #define CPU_STM32MP157Cxx 0x05000000 #define CPU_STM32MP157Axx 0x05000001 #define CPU_STM32MP153Cxx 0x05000024 #define CPU_STM32MP153Axx 0x05000025 #define CPU_STM32MP151Cxx 0x0500002E #define CPU_STM32MP151Axx 0x0500002F +#define CPU_STM32MP157Fxx 0x05000080 +#define CPU_STM32MP157Dxx 0x05000081 +#define CPU_STM32MP153Fxx 0x050000A4 +#define CPU_STM32MP153Dxx 0x050000A5 +#define CPU_STM32MP151Fxx 0x050000AE +#define CPU_STM32MP151Dxx 0x050000AF /* return CPU_STMP32MP...Xxx constants */ u32 get_cpu_type(void); @@ -29,6 +35,10 @@ u32 get_cpu_package(void); #define PKG_AC_TFBGA361 2 #define PKG_AD_TFBGA257 1 +/* Get SOC name */ +#define SOC_NAME_SIZE 20 +void get_soc_name(char name[SOC_NAME_SIZE]); + /* return boot mode */ u32 get_bootmode(void); diff --git a/arch/arm/mach-stm32mp/psci.c b/arch/arm/mach-stm32mp/psci.c index 1d91b2d324..3fb038d3e7 100644 --- a/arch/arm/mach-stm32mp/psci.c +++ b/arch/arm/mach-stm32mp/psci.c @@ -30,6 +30,22 @@ u8 psci_state[STM32MP1_PSCI_NR_CPUS] __secure_data = { PSCI_AFFINITY_LEVEL_ON, PSCI_AFFINITY_LEVEL_OFF}; +static u32 __secure_data cntfrq; + +static u32 __secure cp15_read_cntfrq(void) +{ + u32 frq; + + asm volatile("mrc p15, 0, %0, c14, c0, 0" : "=r" (frq)); + + return frq; +} + +static void __secure cp15_write_cntfrq(u32 frq) +{ + asm volatile ("mcr p15, 0, %0, c14, c0, 0" : : "r" (frq)); +} + static inline void psci_set_state(int cpu, u8 state) { psci_state[cpu] = state; @@ -63,6 +79,9 @@ void __secure psci_arch_cpu_entry(void) psci_set_state(cpu, PSCI_AFFINITY_LEVEL_ON); + /* write the saved cntfrq */ + cp15_write_cntfrq(cntfrq); + /* reset magic in TAMP register */ writel(0xFFFFFFFF, TAMP_BACKUP_MAGIC_NUMBER); } @@ -130,6 +149,9 @@ s32 __secure psci_cpu_on(u32 function_id, u32 target_cpu, u32 pc, if (psci_state[cpu] == PSCI_AFFINITY_LEVEL_ON) return ARM_PSCI_RET_ALREADY_ON; + /* read and save cntfrq of current cpu to write on target cpu */ + cntfrq = cp15_read_cntfrq(); + /* reset magic in TAMP register */ if (readl(TAMP_BACKUP_MAGIC_NUMBER)) writel(0xFFFFFFFF, TAMP_BACKUP_MAGIC_NUMBER); diff --git a/arch/arm/mach-versal/Kconfig b/arch/arm/mach-versal/Kconfig index a08e5ae414..e1d66e8d32 100644 --- a/arch/arm/mach-versal/Kconfig +++ b/arch/arm/mach-versal/Kconfig @@ -56,4 +56,10 @@ config DEFINE_TCM_OCM_MMAP This option if enabled defines the TCM and OCM memory and its memory attributes in MMU table entry. +config VERSAL_NO_DDR + bool "Disable DDR MMU mapping" + help + This option configures MMU with no DDR to avoid speculative + access to DDR memory where DDR is not present. + endif diff --git a/arch/arm/mach-versal/cpu.c b/arch/arm/mach-versal/cpu.c index 6ee6cd43ec..829a6c1b3e 100644 --- a/arch/arm/mach-versal/cpu.c +++ b/arch/arm/mach-versal/cpu.c @@ -81,6 +81,15 @@ void mem_map_fill(void) if (!gd->bd->bi_dram[i].size) break; +#if defined(CONFIG_VERSAL_NO_DDR) + if (gd->bd->bi_dram[i].start < 0x80000000UL || + gd->bd->bi_dram[i].start > 0x100000000UL) { + printf("Ignore caches over %llx/%llx\n", + gd->bd->bi_dram[i].start, + gd->bd->bi_dram[i].size); + continue; + } +#endif versal_mem_map[banks].virt = gd->bd->bi_dram[i].start; versal_mem_map[banks].phys = gd->bd->bi_dram[i].start; versal_mem_map[banks].size = gd->bd->bi_dram[i].size; diff --git a/arch/arm/mach-zynq/spl.c b/arch/arm/mach-zynq/spl.c index 96ba90fb7a..02a7dc9854 100644 --- a/arch/arm/mach-zynq/spl.c +++ b/arch/arm/mach-zynq/spl.c @@ -6,6 +6,7 @@ #include <debug_uart.h> #include <hang.h> #include <spl.h> +#include <generated/dt.h> #include <asm/io.h> #include <asm/spl.h> @@ -44,7 +45,6 @@ u32 spl_boot_device(void) switch ((zynq_slcr_get_boot_mode()) & ZYNQ_BM_MASK) { #ifdef CONFIG_SPL_SPI_SUPPORT case ZYNQ_BM_QSPI: - puts("qspi boot\n"); mode = BOOT_DEVICE_SPI; break; #endif @@ -56,7 +56,6 @@ u32 spl_boot_device(void) break; #ifdef CONFIG_SPL_MMC_SUPPORT case ZYNQ_BM_SD: - puts("mmc boot\n"); mode = BOOT_DEVICE_MMC1; break; #endif @@ -89,8 +88,11 @@ void spl_board_prepare_for_boot(void) int board_fit_config_name_match(const char *name) { /* Just empty function now - can't decide what to choose */ - debug("%s: %s\n", __func__, name); + debug("%s: Check %s, default %s\n", __func__, name, DEVICE_TREE); - return 0; + if (!strcmp(name, DEVICE_TREE)) + return 0; + + return -1; } #endif diff --git a/arch/arm/mach-zynqmp/include/mach/hardware.h b/arch/arm/mach-zynqmp/include/mach/hardware.h index fd361c5ce8..a0acfa2ff1 100644 --- a/arch/arm/mach-zynqmp/include/mach/hardware.h +++ b/arch/arm/mach-zynqmp/include/mach/hardware.h @@ -128,7 +128,9 @@ struct apu_regs { #define ZYNQMP_SILICON_VER_SHIFT 12 struct csu_regs { - u32 reserved0[17]; + u32 reserved0[4]; + u32 multi_boot; + u32 reserved1[12]; u32 version; }; diff --git a/arch/arm/mach-zynqmp/mkimage_fit_atf.sh b/arch/arm/mach-zynqmp/mkimage_fit_atf.sh index 1e770ba111..92e31849f8 100755 --- a/arch/arm/mach-zynqmp/mkimage_fit_atf.sh +++ b/arch/arm/mach-zynqmp/mkimage_fit_atf.sh @@ -29,11 +29,8 @@ else fi if [ ! -f $BL31 ]; then - echo "WARNING: BL31 file $BL31 NOT found, resulting binary is non-functional" >&2 + echo "WARNING: BL31 file $BL31 NOT found, U-Boot will run in EL3" >&2 BL31=/dev/null - # But U-Boot proper could be loaded in EL3 by specifying - # firmware = "uboot"; - # instead of "atf" in config node fi cat << __HEADER_EOF @@ -58,6 +55,10 @@ cat << __HEADER_EOF algo = "md5"; }; }; +__HEADER_EOF + +if [ -f $BL31 ]; then +cat << __ATF atf { description = "ARM Trusted Firmware"; data = /incbin/("$BL31"); @@ -71,7 +72,8 @@ cat << __HEADER_EOF algo = "md5"; }; }; -__HEADER_EOF +__ATF +fi DEFAULT=1 cnt=1 @@ -106,6 +108,15 @@ __CONF_HEADER_EOF cnt=1 for dtname in $DT do +if [ ! -f $BL31 ]; then +cat << __CONF_SECTION1_EOF + config_$cnt { + description = "$(basename $dtname .dtb)"; + firmware = "uboot"; + fdt = "fdt_$cnt"; + }; +__CONF_SECTION1_EOF +else cat << __CONF_SECTION1_EOF config_$cnt { description = "$(basename $dtname .dtb)"; @@ -114,6 +125,8 @@ cat << __CONF_SECTION1_EOF fdt = "fdt_$cnt"; }; __CONF_SECTION1_EOF +fi + cnt=$((cnt+1)) done diff --git a/arch/arm/mach-zynqmp/spl.c b/arch/arm/mach-zynqmp/spl.c index 896657f51c..68df0a79c4 100644 --- a/arch/arm/mach-zynqmp/spl.c +++ b/arch/arm/mach-zynqmp/spl.c @@ -6,7 +6,6 @@ */ #include <common.h> -#include <debug_uart.h> #include <init.h> #include <spl.h> @@ -20,14 +19,6 @@ void board_init_f(ulong dummy) { board_early_init_f(); board_early_init_r(); - -#ifdef CONFIG_DEBUG_UART - /* Uart debug for sure */ - debug_uart_init(); - puts("Debug uart enabled\n"); /* or printch() */ -#endif - /* Delay is required for clocks to be propagated */ - udelay(1000000); } static void ps_mode_reset(ulong mode) @@ -66,6 +57,8 @@ void board_boot_order(u32 *spl_boot_list) spl_boot_list[1] = BOOT_DEVICE_MMC2; if (spl_boot_list[0] == BOOT_DEVICE_MMC2) spl_boot_list[1] = BOOT_DEVICE_MMC1; + + spl_boot_list[2] = BOOT_DEVICE_RAM; } u32 spl_boot_device(void) diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig index 5ce8261451..2bd260e5d7 100644 --- a/arch/microblaze/Kconfig +++ b/arch/microblaze/Kconfig @@ -30,7 +30,4 @@ config STACK_SIZE source "board/xilinx/microblaze-generic/Kconfig" -config SPL_LDSCRIPT - default "arch/microblaze/cpu/u-boot-spl.lds" - endmenu diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig index cc87da7e04..3061bf8863 100644 --- a/arch/riscv/Kconfig +++ b/arch/riscv/Kconfig @@ -242,7 +242,4 @@ config STACK_SIZE_SHIFT int default 14 -config SPL_LDSCRIPT - default "arch/riscv/cpu/u-boot-spl.lds" - endmenu |