diff options
Diffstat (limited to 'arch')
| -rw-r--r-- | arch/arm/mach-sunxi/spl_spi_sunxi.c | 94 |
1 files changed, 53 insertions, 41 deletions
diff --git a/arch/arm/mach-sunxi/spl_spi_sunxi.c b/arch/arm/mach-sunxi/spl_spi_sunxi.c index 043d9f6ead..5b4598a25b 100644 --- a/arch/arm/mach-sunxi/spl_spi_sunxi.c +++ b/arch/arm/mach-sunxi/spl_spi_sunxi.c @@ -36,13 +36,13 @@ /* SUN4I variant of the SPI controller */ /*****************************************************************************/ -#define SUN4I_SPI0_CCTL (0x01C05000 + 0x1C) -#define SUN4I_SPI0_CTL (0x01C05000 + 0x08) -#define SUN4I_SPI0_RX (0x01C05000 + 0x00) -#define SUN4I_SPI0_TX (0x01C05000 + 0x04) -#define SUN4I_SPI0_FIFO_STA (0x01C05000 + 0x28) -#define SUN4I_SPI0_BC (0x01C05000 + 0x20) -#define SUN4I_SPI0_TC (0x01C05000 + 0x24) +#define SUN4I_SPI0_CCTL 0x1C +#define SUN4I_SPI0_CTL 0x08 +#define SUN4I_SPI0_RX 0x00 +#define SUN4I_SPI0_TX 0x04 +#define SUN4I_SPI0_FIFO_STA 0x28 +#define SUN4I_SPI0_BC 0x20 +#define SUN4I_SPI0_TC 0x24 #define SUN4I_CTL_ENABLE BIT(0) #define SUN4I_CTL_MASTER BIT(1) @@ -54,15 +54,15 @@ /* SUN6I variant of the SPI controller */ /*****************************************************************************/ -#define SUN6I_SPI0_CCTL (0x01C68000 + 0x24) -#define SUN6I_SPI0_GCR (0x01C68000 + 0x04) -#define SUN6I_SPI0_TCR (0x01C68000 + 0x08) -#define SUN6I_SPI0_FIFO_STA (0x01C68000 + 0x1C) -#define SUN6I_SPI0_MBC (0x01C68000 + 0x30) -#define SUN6I_SPI0_MTC (0x01C68000 + 0x34) -#define SUN6I_SPI0_BCC (0x01C68000 + 0x38) -#define SUN6I_SPI0_TXD (0x01C68000 + 0x200) -#define SUN6I_SPI0_RXD (0x01C68000 + 0x300) +#define SUN6I_SPI0_CCTL 0x24 +#define SUN6I_SPI0_GCR 0x04 +#define SUN6I_SPI0_TCR 0x08 +#define SUN6I_SPI0_FIFO_STA 0x1C +#define SUN6I_SPI0_MBC 0x30 +#define SUN6I_SPI0_MTC 0x34 +#define SUN6I_SPI0_BCC 0x38 +#define SUN6I_SPI0_TXD 0x200 +#define SUN6I_SPI0_RXD 0x300 #define SUN6I_CTL_ENABLE BIT(0) #define SUN6I_CTL_MASTER BIT(1) @@ -100,11 +100,21 @@ static void spi0_pinmux_setup(unsigned int pin_function) sunxi_gpio_set_cfgpin(SUNXI_GPC(3), pin_function); } +static uintptr_t spi0_base_address(void) +{ + if (!IS_ENABLED(CONFIG_SUNXI_GEN_SUN6I)) + return 0x01C05000; + + return 0x01C68000; +} + /* * Setup 6 MHz from OSC24M (because the BROM is doing the same). */ static void spi0_enable_clock(void) { + uintptr_t base = spi0_base_address(); + /* Deassert SPI0 reset on SUN6I */ if (IS_ENABLED(CONFIG_SUNXI_GEN_SUN6I)) setbits_le32(SUN6I_BUS_SOFT_RST_REG0, @@ -114,36 +124,37 @@ static void spi0_enable_clock(void) setbits_le32(CCM_AHB_GATING0, (1 << AHB_GATE_OFFSET_SPI0)); /* Divide by 4 */ - writel(SPI0_CLK_DIV_BY_4, IS_ENABLED(CONFIG_SUNXI_GEN_SUN6I) ? - SUN6I_SPI0_CCTL : SUN4I_SPI0_CCTL); + writel(SPI0_CLK_DIV_BY_4, base + (IS_ENABLED(CONFIG_SUNXI_GEN_SUN6I) ? + SUN6I_SPI0_CCTL : SUN4I_SPI0_CCTL)); /* 24MHz from OSC24M */ writel((1 << 31), CCM_SPI0_CLK); if (IS_ENABLED(CONFIG_SUNXI_GEN_SUN6I)) { /* Enable SPI in the master mode and do a soft reset */ - setbits_le32(SUN6I_SPI0_GCR, SUN6I_CTL_MASTER | - SUN6I_CTL_ENABLE | - SUN6I_CTL_SRST); + setbits_le32(base + SUN6I_SPI0_GCR, SUN6I_CTL_MASTER | + SUN6I_CTL_ENABLE | SUN6I_CTL_SRST); /* Wait for completion */ - while (readl(SUN6I_SPI0_GCR) & SUN6I_CTL_SRST) + while (readl(base + SUN6I_SPI0_GCR) & SUN6I_CTL_SRST) ; } else { /* Enable SPI in the master mode and reset FIFO */ - setbits_le32(SUN4I_SPI0_CTL, SUN4I_CTL_MASTER | - SUN4I_CTL_ENABLE | - SUN4I_CTL_TF_RST | - SUN4I_CTL_RF_RST); + setbits_le32(base + SUN4I_SPI0_CTL, SUN4I_CTL_MASTER | + SUN4I_CTL_ENABLE | + SUN4I_CTL_TF_RST | + SUN4I_CTL_RF_RST); } } static void spi0_disable_clock(void) { + uintptr_t base = spi0_base_address(); + /* Disable the SPI0 controller */ if (IS_ENABLED(CONFIG_SUNXI_GEN_SUN6I)) - clrbits_le32(SUN6I_SPI0_GCR, SUN6I_CTL_MASTER | + clrbits_le32(base + SUN6I_SPI0_GCR, SUN6I_CTL_MASTER | SUN6I_CTL_ENABLE); else - clrbits_le32(SUN4I_SPI0_CTL, SUN4I_CTL_MASTER | + clrbits_le32(base + SUN4I_SPI0_CTL, SUN4I_CTL_MASTER | SUN4I_CTL_ENABLE); /* Disable the SPI0 clock */ @@ -227,6 +238,7 @@ static void spi0_read_data(void *buf, u32 addr, u32 len) { u8 *buf8 = buf; u32 chunk_len; + uintptr_t base = spi0_base_address(); while (len > 0) { chunk_len = len; @@ -235,23 +247,23 @@ static void spi0_read_data(void *buf, u32 addr, u32 len) if (IS_ENABLED(CONFIG_SUNXI_GEN_SUN6I)) { sunxi_spi0_read_data(buf8, addr, chunk_len, - SUN6I_SPI0_TCR, + base + SUN6I_SPI0_TCR, SUN6I_TCR_XCH, - SUN6I_SPI0_FIFO_STA, - SUN6I_SPI0_TXD, - SUN6I_SPI0_RXD, - SUN6I_SPI0_MBC, - SUN6I_SPI0_MTC, - SUN6I_SPI0_BCC); + base + SUN6I_SPI0_FIFO_STA, + base + SUN6I_SPI0_TXD, + base + SUN6I_SPI0_RXD, + base + SUN6I_SPI0_MBC, + base + SUN6I_SPI0_MTC, + base + SUN6I_SPI0_BCC); } else { sunxi_spi0_read_data(buf8, addr, chunk_len, - SUN4I_SPI0_CTL, + base + SUN4I_SPI0_CTL, SUN4I_CTL_XCH, - SUN4I_SPI0_FIFO_STA, - SUN4I_SPI0_TX, - SUN4I_SPI0_RX, - SUN4I_SPI0_BC, - SUN4I_SPI0_TC, + base + SUN4I_SPI0_FIFO_STA, + base + SUN4I_SPI0_TX, + base + SUN4I_SPI0_RX, + base + SUN4I_SPI0_BC, + base + SUN4I_SPI0_TC, 0); } |