diff options
Diffstat (limited to 'arch')
-rw-r--r-- | arch/arm/cpu/armv7/exynos/common_setup.h | 62 | ||||
-rw-r--r-- | arch/arm/cpu/armv7/exynos/lowlevel_init.c | 55 | ||||
-rw-r--r-- | arch/arm/cpu/armv7/exynos/soc.c | 53 | ||||
-rw-r--r-- | arch/arm/include/asm/arch-exynos/system.h | 2 |
4 files changed, 77 insertions, 95 deletions
diff --git a/arch/arm/cpu/armv7/exynos/common_setup.h b/arch/arm/cpu/armv7/exynos/common_setup.h index e6318c0366..5235abb808 100644 --- a/arch/arm/cpu/armv7/exynos/common_setup.h +++ b/arch/arm/cpu/armv7/exynos/common_setup.h @@ -23,6 +23,8 @@ * MA 02111-1307 USA */ +#include <asm/arch/system.h> + #define DMC_OFFSET 0x10000 /* @@ -43,3 +45,63 @@ void system_clock_init(void); int do_lowlevel_init(void); void sdelay(unsigned long); + +enum l2_cache_params { + CACHE_DATA_RAM_LATENCY_2_CYCLES = (2 << 0), + CACHE_DATA_RAM_LATENCY_3_CYCLES = (3 << 0), + CACHE_DISABLE_CLEAN_EVICT = (1 << 3), + CACHE_DATA_RAM_SETUP = (1 << 5), + CACHE_TAG_RAM_LATENCY_2_CYCLES = (2 << 6), + CACHE_TAG_RAM_LATENCY_3_CYCLES = (3 << 6), + CACHE_ENABLE_HAZARD_DETECT = (1 << 7), + CACHE_TAG_RAM_SETUP = (1 << 9), + CACHE_ECC_AND_PARITY = (1 << 21), + CACHE_ENABLE_FORCE_L2_LOGIC = (1 << 27) +}; + + +#ifndef CONFIG_SYS_L2CACHE_OFF +/* + * Configure L2CTLR to get timings that keep us from hanging/crashing. + * + * Must be inline here since low_power_start() is called without a + * stack (!). + */ +static inline void configure_l2_ctlr(void) +{ + uint32_t val; + + mrc_l2_ctlr(val); + + val |= CACHE_TAG_RAM_SETUP | + CACHE_DATA_RAM_SETUP | + CACHE_TAG_RAM_LATENCY_2_CYCLES | + CACHE_DATA_RAM_LATENCY_2_CYCLES; + + if (proid_is_exynos5420() || proid_is_exynos5800()) { + val |= CACHE_ECC_AND_PARITY | + CACHE_TAG_RAM_LATENCY_3_CYCLES | + CACHE_DATA_RAM_LATENCY_3_CYCLES; + } + + mcr_l2_ctlr(val); +} + +/* + * Configure L2ACTLR. + * + * Must be inline here since low_power_start() is called without a + * stack (!). + */ +static inline void configure_l2_actlr(void) +{ + uint32_t val; + + if (proid_is_exynos5420() || proid_is_exynos5800()) { + mrc_l2_aux_ctlr(val); + val |= CACHE_ENABLE_FORCE_L2_LOGIC | + CACHE_DISABLE_CLEAN_EVICT; + mcr_l2_aux_ctlr(val); + } +} +#endif diff --git a/arch/arm/cpu/armv7/exynos/lowlevel_init.c b/arch/arm/cpu/armv7/exynos/lowlevel_init.c index 329ab0cf8e..120aaf8b96 100644 --- a/arch/arm/cpu/armv7/exynos/lowlevel_init.c +++ b/arch/arm/cpu/armv7/exynos/lowlevel_init.c @@ -47,42 +47,6 @@ enum { #ifdef CONFIG_EXYNOS5420 /* - * Enable ECC by setting L2CTLR[21]. - * Set L2CTLR[7] to make tag ram latency 3 cycles and - * set L2CTLR[1] to make data ram latency 3 cycles. - * We need to make RAM latency of 3 cycles here because cores - * power ON and OFF while switching. And everytime a core powers - * ON, iROM provides it a default L2CTLR value 0x400 which stands - * for TAG RAM setup of 1 cycle. Hence, we face a need of - * restoring data and tag latency values. - */ -static void configure_l2_ctlr(void) -{ - uint32_t val; - - mrc_l2_ctlr(val); - val |= (1 << 21); - val |= (1 << 7); - val |= (1 << 1); - mcr_l2_ctlr(val); -} - -/* - * Set L2ACTLR[27] to prevent the clock generator from stopping - * the L2 logic clock. - * Set L2ACTLR[3] to disable clean/evict push to external. - */ -static void configure_l2_actlr(void) -{ - uint32_t val; - - mrc_l2_aux_ctlr(val); - val |= (1 << 27); - val |= (1 << 3); - mcr_l2_aux_ctlr(val); -} - -/* * Power up secondary CPUs. */ static void secondary_cpu_start(void) @@ -185,10 +149,6 @@ static void power_down_core(void) */ static void secondary_cores_configure(void) { - /* Setup L2 cache */ - configure_l2_ctlr(); - v7_enable_l2_hazard_detect(); - /* Clear secondary boot iRAM base */ writel(0x0, (CONFIG_EXYNOS_RELOCATE_CODE_BASE + 0x1C)); @@ -214,6 +174,21 @@ int do_lowlevel_init(void) arch_cpu_init(); +#ifndef CONFIG_SYS_L2CACHE_OFF + /* + * Init L2 cache parameters here for use by boot and resume + * + * These are here instead of in v7_outer_cache_enable() so that the + * L2 cache settings get properly set even at resume time or if we're + * running U-Boot with the cache off. The kernel still needs us to + * set these for it. + */ + configure_l2_ctlr(); + configure_l2_actlr(); + dsb(); + isb(); +#endif + #ifdef CONFIG_EXYNOS5420 relocate_wait_code(); diff --git a/arch/arm/cpu/armv7/exynos/soc.c b/arch/arm/cpu/armv7/exynos/soc.c index 68eb8e7fc9..0f116b141a 100644 --- a/arch/arm/cpu/armv7/exynos/soc.c +++ b/arch/arm/cpu/armv7/exynos/soc.c @@ -9,15 +9,6 @@ #include <asm/io.h> #include <asm/system.h> -enum l2_cache_params { - CACHE_TAG_RAM_SETUP = (1 << 9), - CACHE_DATA_RAM_SETUP = (1 << 5), - CACHE_TAG_RAM_LATENCY = (2 << 6), - CACHE_DATA_RAM_LATENCY = (2 << 0), - CACHE_ENABLE_CLEAN_EVICT = (0 << 3), - CACHE_DISABLE_CLEAN_EVICT = (1 << 3) -}; - void reset_cpu(ulong addr) { writel(0x1, samsung_get_base_swreset()); @@ -30,47 +21,3 @@ void enable_caches(void) dcache_enable(); } #endif - -#ifndef CONFIG_SYS_L2CACHE_OFF -/* - * Set L2 cache parameters - */ -static void exynos5_set_l2cache_params(void) -{ - unsigned int l2ctlr = 0, l2actlr = 0; - - /* Read L2CTLR value */ - asm volatile("mrc p15, 1, %0, c9, c0, 2\n" : "=r"(l2ctlr)); - - /* Set cache latency cycles */ - l2ctlr |= CACHE_TAG_RAM_LATENCY | - CACHE_DATA_RAM_LATENCY; - - if (proid_is_exynos5420() || proid_is_exynos5800()) { - /* Read L2ACTLR value */ - asm volatile("mrc p15, 1, %0, c15, c0, 0" : "=r" (l2actlr)); - - /* Disable clean/evict push to external */ - l2actlr |= CACHE_DISABLE_CLEAN_EVICT; - - /* Write new vlaue to L2ACTLR */ - asm volatile("mcr p15, 1, %0, c15, c0, 0" : : "r" (l2actlr)); - } else { - /* Set cache setup cycles */ - l2ctlr |= CACHE_TAG_RAM_SETUP | - CACHE_DATA_RAM_SETUP; - } - - /* Write new vlaue to L2CTLR */ - asm volatile("mcr p15, 1, %0, c9, c0, 2\n" : : "r"(l2ctlr)); -} - -/* - * Sets L2 cache related parameters before enabling data cache - */ -void v7_outer_cache_enable(void) -{ - if (cpu_is_exynos5()) - exynos5_set_l2cache_params(); -} -#endif diff --git a/arch/arm/include/asm/arch-exynos/system.h b/arch/arm/include/asm/arch-exynos/system.h index a9fd5e6aa4..3ffb296a57 100644 --- a/arch/arm/include/asm/arch-exynos/system.h +++ b/arch/arm/include/asm/arch-exynos/system.h @@ -37,7 +37,6 @@ struct exynos5_sysreg { #define USB20_PHY_CFG_HOST_LINK_EN (1 << 0) -#ifdef CONFIG_EXYNOS5420 /* * Data Synchronization Barrier acts as a special kind of memory barrier. * No instruction in program order after this instruction executes until @@ -125,7 +124,6 @@ struct exynos5_sysreg { /* Write L2 Auxilliary Control register */ #define mcr_l2_aux_ctlr(x) __asm__ __volatile__ \ ("mcr p15, 1, %0, c15, c0, 0\n\t" : : "r"(x)) -#endif void set_usbhost_mode(unsigned int mode); void set_system_display_ctrl(void); |