diff options
Diffstat (limited to 'arch')
24 files changed, 622 insertions, 252 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 43ba33a2af..72558b8562 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -336,6 +336,9 @@ config TARGET_BCM958622HR config ARCH_EXYNOS bool "Samsung EXYNOS" +config ARCH_S5PC1XX + bool "Samsung S5PC1XX" + config ARCH_HIGHBANK bool "Calxeda Highbank" @@ -414,6 +417,9 @@ config TARGET_HUMMINGBOARD config TARGET_TQMA6 bool "TQ Systems TQMa6 board" +config TARGET_OT1200 + bool "Bachmann OT1200" + config OMAP34XX bool "OMAP34XX SoC" @@ -429,12 +435,6 @@ config RMOBILE config TARGET_CM_FX6 bool "Support cm_fx6" -config TARGET_S5P_GONI - bool "Support s5p_goni" - -config TARGET_SMDKC100 - bool "Support smdkc100" - config TARGET_SOCFPGA_CYCLONE5 bool "Support socfpga_cyclone5" @@ -550,6 +550,8 @@ source "arch/arm/cpu/arm926ejs/orion5x/Kconfig" source "arch/arm/cpu/armv7/rmobile/Kconfig" +source "arch/arm/cpu/armv7/s5pc1xx/Kconfig" + source "arch/arm/cpu/armv7/tegra-common/Kconfig" source "arch/arm/cpu/armv7/uniphier/Kconfig" @@ -583,6 +585,7 @@ source "board/atmel/at91sam9rlek/Kconfig" source "board/atmel/at91sam9x5ek/Kconfig" source "board/atmel/sama5d3_xplained/Kconfig" source "board/atmel/sama5d3xek/Kconfig" +source "board/bachmann/ot1200/Kconfig" source "board/balloon3/Kconfig" source "board/barco/titanium/Kconfig" source "board/bluegiga/apx4devkit/Kconfig" @@ -657,9 +660,7 @@ source "board/raspberrypi/rpi_b/Kconfig" source "board/ronetix/pm9261/Kconfig" source "board/ronetix/pm9263/Kconfig" source "board/ronetix/pm9g45/Kconfig" -source "board/samsung/goni/Kconfig" source "board/samsung/smdk2410/Kconfig" -source "board/samsung/smdkc100/Kconfig" source "board/sandisk/sansa_fuze_plus/Kconfig" source "board/scb9328/Kconfig" source "board/schulercontrol/sc_sps_1/Kconfig" diff --git a/arch/arm/cpu/arm1136/mx31/timer.c b/arch/arm/cpu/arm1136/mx31/timer.c index f111242e53..3a81ce427c 100644 --- a/arch/arm/cpu/arm1136/mx31/timer.c +++ b/arch/arm/cpu/arm1136/mx31/timer.c @@ -7,9 +7,6 @@ #include <common.h> #include <asm/arch/imx-regs.h> -#include <asm/arch/clock.h> -#include <div64.h> -#include <watchdog.h> #include <asm/io.h> #define TIMER_BASE 0x53f90000 /* General purpose timer 1 */ @@ -28,57 +25,6 @@ DECLARE_GLOBAL_DATA_PTR; -/* - * "time" is measured in 1 / CONFIG_SYS_HZ seconds, - * "tick" is internal timer period - */ - -#ifdef CONFIG_MX31_TIMER_HIGH_PRECISION -/* ~0.4% error - measured with stop-watch on 100s boot-delay */ -static inline unsigned long long tick_to_time(unsigned long long tick) -{ - tick *= CONFIG_SYS_HZ; - do_div(tick, MXC_CLK32); - return tick; -} - -static inline unsigned long long time_to_tick(unsigned long long time) -{ - time *= MXC_CLK32; - do_div(time, CONFIG_SYS_HZ); - return time; -} - -static inline unsigned long long us_to_tick(unsigned long long us) -{ - us = us * MXC_CLK32 + 999999; - do_div(us, 1000000); - return us; -} -#else -/* ~2% error */ -#define TICK_PER_TIME ((MXC_CLK32 + CONFIG_SYS_HZ / 2) / CONFIG_SYS_HZ) -#define US_PER_TICK (1000000 / MXC_CLK32) - -static inline unsigned long long tick_to_time(unsigned long long tick) -{ - do_div(tick, TICK_PER_TIME); - return tick; -} - -static inline unsigned long long time_to_tick(unsigned long long time) -{ - return time * TICK_PER_TIME; -} - -static inline unsigned long long us_to_tick(unsigned long long us) -{ - us += US_PER_TICK - 1; - do_div(us, US_PER_TICK); - return us; -} -#endif - /* The 32768Hz 32-bit timer overruns in 131072 seconds */ int timer_init(void) { @@ -95,53 +41,7 @@ int timer_init(void) return 0; } -unsigned long long get_ticks(void) -{ - ulong now = GPTCNT; /* current tick value */ - - if (now >= gd->arch.lastinc) /* normal mode (non roll) */ - /* move stamp forward with absolut diff ticks */ - gd->arch.tbl += (now - gd->arch.lastinc); - else /* we have rollover of incrementer */ - gd->arch.tbl += (0xFFFFFFFF - gd->arch.lastinc) + now; - gd->arch.lastinc = now; - return gd->arch.tbl; -} - -ulong get_timer_masked(void) -{ - /* - * get_ticks() returns a long long (64 bit), it wraps in - * 2^64 / MXC_CLK32 = 2^64 / 2^15 = 2^49 ~ 5 * 10^14 (s) ~ - * 5 * 10^9 days... and get_ticks() * CONFIG_SYS_HZ wraps in - * 5 * 10^6 days - long enough. - */ - return tick_to_time(get_ticks()); -} - -ulong get_timer(ulong base) -{ - return get_timer_masked() - base; -} - -/* delay x useconds AND preserve advance timestamp value */ -void __udelay(unsigned long usec) -{ - unsigned long long tmp; - ulong tmo; - - tmo = us_to_tick(usec); - tmp = get_ticks() + tmo; /* get current timestamp */ - - while (get_ticks() < tmp) /* loop till event */ - /*NOP*/; -} - -/* - * This function is derived from PowerPC code (timebase clock frequency). - * On ARM it returns the number of timer ticks per second. - */ -ulong get_tbclk(void) +unsigned long timer_read_counter(void) { - return MXC_CLK32; + return GPTCNT; } diff --git a/arch/arm/cpu/arm1136/mx35/timer.c b/arch/arm/cpu/arm1136/mx35/timer.c index cc6166f938..4edf533e2a 100644 --- a/arch/arm/cpu/arm1136/mx35/timer.c +++ b/arch/arm/cpu/arm1136/mx35/timer.c @@ -9,16 +9,11 @@ #include <common.h> #include <asm/io.h> -#include <div64.h> #include <asm/arch/imx-regs.h> #include <asm/arch/crm_regs.h> -#include <asm/arch/clock.h> DECLARE_GLOBAL_DATA_PTR; -#define timestamp (gd->arch.tbl) -#define lastinc (gd->arch.lastinc) - /* General purpose timers bitfields */ #define GPTCR_SWR (1<<15) /* Software reset */ #define GPTCR_FRR (1<<9) /* Freerun / restart */ @@ -26,27 +21,6 @@ DECLARE_GLOBAL_DATA_PTR; #define GPTCR_TEN (1) /* Timer enable */ /* - * "time" is measured in 1 / CONFIG_SYS_HZ seconds, - * "tick" is internal timer period - */ -/* ~0.4% error - measured with stop-watch on 100s boot-delay */ -static inline unsigned long long tick_to_time(unsigned long long tick) -{ - tick *= CONFIG_SYS_HZ; - do_div(tick, MXC_CLK32); - - return tick; -} - -static inline unsigned long long us_to_tick(unsigned long long us) -{ - us = us * MXC_CLK32 + 999999; - do_div(us, 1000000); - - return us; -} - -/* * nothing really to do with interrupts, just starts up a counter. * The 32KHz 32-bit timer overruns in 134217 seconds */ @@ -71,60 +45,3 @@ int timer_init(void) return 0; } - -unsigned long long get_ticks(void) -{ - struct gpt_regs *gpt = (struct gpt_regs *)GPT1_BASE_ADDR; - ulong now = readl(&gpt->counter); /* current tick value */ - - if (now >= lastinc) { - /* - * normal mode (non roll) - * move stamp forward with absolut diff ticks - */ - timestamp += (now - lastinc); - } else { - /* we have rollover of incrementer */ - timestamp += (0xFFFFFFFF - lastinc) + now; - } - lastinc = now; - return timestamp; -} - -ulong get_timer_masked(void) -{ - /* - * get_ticks() returns a long long (64 bit), it wraps in - * 2^64 / MXC_CLK32 = 2^64 / 2^15 = 2^49 ~ 5 * 10^14 (s) ~ - * 5 * 10^9 days... and get_ticks() * CONFIG_SYS_HZ wraps in - * 5 * 10^6 days - long enough. - */ - return tick_to_time(get_ticks()); -} - -ulong get_timer(ulong base) -{ - return get_timer_masked() - base; -} - -/* delay x useconds AND preserve advance timstamp value */ -void __udelay(unsigned long usec) -{ - unsigned long long tmp; - ulong tmo; - - tmo = us_to_tick(usec); - tmp = get_ticks() + tmo; /* get current timestamp */ - - while (get_ticks() < tmp) /* loop till event */ - /*NOP*/; -} - -/* - * This function is derived from PowerPC code (timebase clock frequency). - * On ARM it returns the number of timer ticks per second. - */ -ulong get_tbclk(void) -{ - return MXC_CLK32; -} diff --git a/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c b/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c index 3baf4ddefc..97ef67d8c5 100644 --- a/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c +++ b/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c @@ -240,9 +240,14 @@ static void mx23_mem_setup_vddmem(void) struct mxs_power_regs *power_regs = (struct mxs_power_regs *)MXS_POWER_BASE; + /* We must wait before and after disabling the current limiter! */ + early_delay(10000); + clrbits_le32(&power_regs->hw_power_vddmemctrl, POWER_VDDMEMCTRL_ENABLE_ILIMIT); + early_delay(10000); + } static void mx23_mem_init(void) @@ -269,7 +274,13 @@ static void mx23_mem_init(void) setbits_le32(MXS_DRAM_BASE + 0x20, 1 << 16); clrbits_le32(MXS_DRAM_BASE + 0x40, 1 << 17); - early_delay(20000); + + /* Wait for EMI_STAT bit DRAM_HALTED */ + for (;;) { + if (!(readl(MXS_EMI_BASE + 0x10) & (1 << 1))) + break; + early_delay(1000); + } /* Adjust EMI port priority. */ clrsetbits_le32(0x80020000, 0x1f << 16, 0x2); diff --git a/arch/arm/cpu/armv7/exynos/Kconfig b/arch/arm/cpu/armv7/exynos/Kconfig index e7c93d8c1f..7a0d182e5f 100644 --- a/arch/arm/cpu/armv7/exynos/Kconfig +++ b/arch/arm/cpu/armv7/exynos/Kconfig @@ -5,6 +5,7 @@ choice config TARGET_SMDKV310 bool "Exynos4210 SMDKV310 board" + select OF_CONTROL if !SPL_BUILD config TARGET_TRATS bool "Exynos4210 Trats board" diff --git a/arch/arm/cpu/armv7/mx6/clock.c b/arch/arm/cpu/armv7/mx6/clock.c index 336e557a27..d200531030 100644 --- a/arch/arm/cpu/armv7/mx6/clock.c +++ b/arch/arm/cpu/armv7/mx6/clock.c @@ -642,6 +642,33 @@ int enable_pcie_clock(void) BM_ANADIG_PLL_ENET_ENABLE_PCIE); } +#ifdef CONFIG_SECURE_BOOT +void hab_caam_clock_enable(unsigned char enable) +{ + u32 reg; + + /* CG4 ~ CG6, CAAM clocks */ + reg = __raw_readl(&imx_ccm->CCGR0); + if (enable) + reg |= (MXC_CCM_CCGR0_CAAM_WRAPPER_IPG_MASK | + MXC_CCM_CCGR0_CAAM_WRAPPER_ACLK_MASK | + MXC_CCM_CCGR0_CAAM_SECURE_MEM_MASK); + else + reg &= ~(MXC_CCM_CCGR0_CAAM_WRAPPER_IPG_MASK | + MXC_CCM_CCGR0_CAAM_WRAPPER_ACLK_MASK | + MXC_CCM_CCGR0_CAAM_SECURE_MEM_MASK); + __raw_writel(reg, &imx_ccm->CCGR0); + + /* EMI slow clk */ + reg = __raw_readl(&imx_ccm->CCGR6); + if (enable) + reg |= MXC_CCM_CCGR6_EMI_SLOW_MASK; + else + reg &= ~MXC_CCM_CCGR6_EMI_SLOW_MASK; + __raw_writel(reg, &imx_ccm->CCGR6); +} +#endif + unsigned int mxc_get_clock(enum mxc_clock clk) { switch (clk) { diff --git a/arch/arm/cpu/armv7/mx6/hab.c b/arch/arm/cpu/armv7/mx6/hab.c index f6810a680d..8dee595eaf 100644 --- a/arch/arm/cpu/armv7/mx6/hab.c +++ b/arch/arm/cpu/armv7/mx6/hab.c @@ -1,12 +1,14 @@ /* - * Copyright (C) 2010-2013 Freescale Semiconductor, Inc. + * Copyright (C) 2010-2014 Freescale Semiconductor, Inc. * * SPDX-License-Identifier: GPL-2.0+ */ #include <common.h> #include <asm/io.h> +#include <asm/system.h> #include <asm/arch/hab.h> +#include <asm/arch/clock.h> #include <asm/arch/sys_proto.h> /* -------- start of HAB API updates ------------*/ @@ -71,6 +73,44 @@ ((hab_rvt_exit_t *)HAB_RVT_EXIT) \ ) +#define IVT_SIZE 0x20 +#define ALIGN_SIZE 0x1000 +#define CSF_PAD_SIZE 0x2000 +#define MX6DQ_PU_IROM_MMU_EN_VAR 0x009024a8 +#define MX6DLS_PU_IROM_MMU_EN_VAR 0x00901dd0 +#define MX6SL_PU_IROM_MMU_EN_VAR 0x00900a18 + +/* + * +------------+ 0x0 (DDR_UIMAGE_START) - + * | Header | | + * +------------+ 0x40 | + * | | | + * | | | + * | | | + * | | | + * | Image Data | | + * . | | + * . | > Stuff to be authenticated ----+ + * . | | | + * | | | | + * | | | | + * +------------+ | | + * | | | | + * | Fill Data | | | + * | | | | + * +------------+ Align to ALIGN_SIZE | | + * | IVT | | | + * +------------+ + IVT_SIZE - | + * | | | + * | CSF DATA | <---------------------------------------------------------+ + * | | + * +------------+ + * | | + * | Fill Data | + * | | + * +------------+ + CSF_PAD_SIZE + */ + bool is_hab_enabled(void) { struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR; @@ -144,6 +184,108 @@ int get_hab_status(void) return 0; } +uint32_t authenticate_image(uint32_t ddr_start, uint32_t image_size) +{ + uint32_t load_addr = 0; + size_t bytes; + ptrdiff_t ivt_offset = 0; + int result = 0; + ulong start; + hab_rvt_authenticate_image_t *hab_rvt_authenticate_image; + hab_rvt_entry_t *hab_rvt_entry; + hab_rvt_exit_t *hab_rvt_exit; + + hab_rvt_authenticate_image = hab_rvt_authenticate_image_p; + hab_rvt_entry = hab_rvt_entry_p; + hab_rvt_exit = hab_rvt_exit_p; + + if (is_hab_enabled()) { + printf("\nAuthenticate image from DDR location 0x%x...\n", + ddr_start); + + hab_caam_clock_enable(1); + + if (hab_rvt_entry() == HAB_SUCCESS) { + /* If not already aligned, Align to ALIGN_SIZE */ + ivt_offset = (image_size + ALIGN_SIZE - 1) & + ~(ALIGN_SIZE - 1); + + start = ddr_start; + bytes = ivt_offset + IVT_SIZE + CSF_PAD_SIZE; +#ifdef DEBUG + printf("\nivt_offset = 0x%x, ivt addr = 0x%x\n", + ivt_offset, ddr_start + ivt_offset); + puts("Dumping IVT\n"); + print_buffer(ddr_start + ivt_offset, + (void *)(ddr_start + ivt_offset), + 4, 0x8, 0); + + puts("Dumping CSF Header\n"); + print_buffer(ddr_start + ivt_offset+IVT_SIZE, + (void *)(ddr_start + ivt_offset+IVT_SIZE), + 4, 0x10, 0); + + get_hab_status(); + + puts("\nCalling authenticate_image in ROM\n"); + printf("\tivt_offset = 0x%x\n", ivt_offset); + printf("\tstart = 0x%08lx\n", start); + printf("\tbytes = 0x%x\n", bytes); +#endif + /* + * If the MMU is enabled, we have to notify the ROM + * code, or it won't flush the caches when needed. + * This is done, by setting the "pu_irom_mmu_enabled" + * word to 1. You can find its address by looking in + * the ROM map. This is critical for + * authenticate_image(). If MMU is enabled, without + * setting this bit, authentication will fail and may + * crash. + */ + /* Check MMU enabled */ + if (get_cr() & CR_M) { + if (is_cpu_type(MXC_CPU_MX6Q) || + is_cpu_type(MXC_CPU_MX6D)) { + /* + * This won't work on Rev 1.0.0 of + * i.MX6Q/D, since their ROM doesn't + * do cache flushes. don't think any + * exist, so we ignore them. + */ + writel(1, MX6DQ_PU_IROM_MMU_EN_VAR); + } else if (is_cpu_type(MXC_CPU_MX6DL) || + is_cpu_type(MXC_CPU_MX6SOLO)) { + writel(1, MX6DLS_PU_IROM_MMU_EN_VAR); + } else if (is_cpu_type(MXC_CPU_MX6SL)) { + writel(1, MX6SL_PU_IROM_MMU_EN_VAR); + } + } + + load_addr = (uint32_t)hab_rvt_authenticate_image( + HAB_CID_UBOOT, + ivt_offset, (void **)&start, + (size_t *)&bytes, NULL); + if (hab_rvt_exit() != HAB_SUCCESS) { + puts("hab exit function fail\n"); + load_addr = 0; + } + } else { + puts("hab entry function fail\n"); + } + + hab_caam_clock_enable(0); + + get_hab_status(); + } else { + puts("hab fuse not enabled\n"); + } + + if ((!is_hab_enabled()) || (load_addr != 0)) + result = 1; + + return result; +} + int do_hab_status(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { if ((argc != 1)) { @@ -156,8 +298,33 @@ int do_hab_status(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return 0; } +static int do_authenticate_image(cmd_tbl_t *cmdtp, int flag, int argc, + char * const argv[]) +{ + ulong addr, ivt_offset; + int rcode = 0; + + if (argc < 3) + return CMD_RET_USAGE; + + addr = simple_strtoul(argv[1], NULL, 16); + ivt_offset = simple_strtoul(argv[2], NULL, 16); + + rcode = authenticate_image(addr, ivt_offset); + + return rcode; +} + U_BOOT_CMD( hab_status, CONFIG_SYS_MAXARGS, 1, do_hab_status, "display HAB status", "" ); + +U_BOOT_CMD( + hab_auth_img, 3, 0, do_authenticate_image, + "authenticate image via HAB", + "addr ivt_offset\n" + "addr - image hex address\n" + "ivt_offset - hex offset of IVT in the image" + ); diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c index ba21cfe580..6352422253 100644 --- a/arch/arm/cpu/armv7/mx6/soc.c +++ b/arch/arm/cpu/armv7/mx6/soc.c @@ -273,10 +273,25 @@ int board_postclk_init(void) #ifndef CONFIG_SYS_DCACHE_OFF void enable_caches(void) { +#if defined(CONFIG_SYS_ARM_CACHE_WRITETHROUGH) + enum dcache_option option = DCACHE_WRITETHROUGH; +#else + enum dcache_option option = DCACHE_WRITEBACK; +#endif + /* Avoid random hang when download by usb */ invalidate_dcache_all(); + /* Enable D-cache. I-cache is already enabled in start.S */ dcache_enable(); + + /* Enable caching on OCRAM and ROM */ + mmu_set_region_dcache_behaviour(ROMCP_ARB_BASE_ADDR, + ROMCP_ARB_END_ADDR, + option); + mmu_set_region_dcache_behaviour(IRAM_BASE_ADDR, + IRAM_SIZE, + option); } #endif @@ -339,10 +354,10 @@ const struct boot_mode soc_boot_modes[] = { void s_init(void) { struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR; - int is_6q = is_cpu_type(MXC_CPU_MX6Q); + struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; u32 mask480; u32 mask528; - + u32 reg, periph1, periph2; if (is_cpu_type(MXC_CPU_MX6SX)) return; @@ -357,15 +372,23 @@ void s_init(void) ANATOP_PFD_CLKGATE_MASK(1) | ANATOP_PFD_CLKGATE_MASK(2) | ANATOP_PFD_CLKGATE_MASK(3); - mask528 = ANATOP_PFD_CLKGATE_MASK(0) | - ANATOP_PFD_CLKGATE_MASK(1) | + mask528 = ANATOP_PFD_CLKGATE_MASK(1) | ANATOP_PFD_CLKGATE_MASK(3); - /* - * Don't reset PFD2 on DL/S - */ - if (is_6q) + reg = readl(&ccm->cbcmr); + periph2 = ((reg & MXC_CCM_CBCMR_PRE_PERIPH2_CLK_SEL_MASK) + >> MXC_CCM_CBCMR_PRE_PERIPH2_CLK_SEL_OFFSET); + periph1 = ((reg & MXC_CCM_CBCMR_PRE_PERIPH_CLK_SEL_MASK) + >> MXC_CCM_CBCMR_PRE_PERIPH_CLK_SEL_OFFSET); + + /* Checking if PLL2 PFD0 or PLL2 PFD2 is using for periph clock */ + if ((periph2 != 0x2) && (periph1 != 0x2)) + mask528 |= ANATOP_PFD_CLKGATE_MASK(0); + + if ((periph2 != 0x1) && (periph1 != 0x1) && + (periph2 != 0x3) && (periph1 != 0x3)) mask528 |= ANATOP_PFD_CLKGATE_MASK(2); + writel(mask480, &anatop->pfd_480_set); writel(mask528, &anatop->pfd_528_set); writel(mask480, &anatop->pfd_480_clr); diff --git a/arch/arm/cpu/armv7/rmobile/lowlevel_init_ca15.S b/arch/arm/cpu/armv7/rmobile/lowlevel_init_ca15.S index 287f8d74af..879e0e097f 100644 --- a/arch/arm/cpu/armv7/rmobile/lowlevel_init_ca15.S +++ b/arch/arm/cpu/armv7/rmobile/lowlevel_init_ca15.S @@ -35,6 +35,13 @@ do_cpu_waiting: */ .align 4 do_lowlevel_init: + ldr r2, =0xFF000044 /* PRR */ + ldr r1, [r2] + and r1, r1, #0x7F00 + lsrs r1, r1, #8 + cmp r1, #0x4C /* 0x4C is ID of r8a7794 */ + beq _exit_init_l2_a15 + /* surpress wfe if ca15 */ tst r4, #4 mrceq p15, 0, r0, c1, c0, 1 /* actlr */ @@ -42,11 +49,6 @@ do_lowlevel_init: mcreq p15, 0, r0, c1, c0, 1 /* and set l2 latency */ - mrceq p15, 1, r0, c9, c0, 2 /* l2ctlr */ - orreq r0, r0, #0x00000800 - orreq r0, r0, #0x00000003 - mcreq p15, 1, r0, c9, c0, 2 - mrc p15, 0, r0, c0, c0, 5 /* r0 = MPIDR */ and r0, r0, #0xf00 lsr r0, r0, #8 @@ -58,7 +60,15 @@ do_lowlevel_init: cmp r1, #3 /* has already been set up */ bicne r0, r0, #0xe7 orrne r0, r0, #0x83 /* L2CTLR[7:6] + L2CTLR[2:0] */ - orrne r0, r0, #0x20 /* L2CTLR[5] */ + + ldr r2, =0xFF000044 /* PRR */ + ldr r1, [r2] + and r1, r1, #0x7F00 + lsrs r1, r1, #8 + cmp r1, #0x45 /* 0x45 is ID of r8a7790 */ + bne L2CTLR_5_SKIP + orrne r0, r0, #0x20 /* L2CTLR[5] */ +L2CTLR_5_SKIP: mcrne p15, 1, r0, c9, c0, 2 _exit_init_l2_a15: diff --git a/arch/arm/cpu/armv7/s5pc1xx/Kconfig b/arch/arm/cpu/armv7/s5pc1xx/Kconfig new file mode 100644 index 0000000000..2fbbc18203 --- /dev/null +++ b/arch/arm/cpu/armv7/s5pc1xx/Kconfig @@ -0,0 +1,25 @@ +if ARCH_S5PC1XX + +choice + prompt "S5PC1XX board select" + +config TARGET_S5P_GONI + bool "S5P Goni board" + select OF_CONTROL if !SPL_BUILD + +config TARGET_SMDKC100 + bool "Support smdkc100 board" + select OF_CONTROL if !SPL_BUILD + +endchoice + +config SYS_CPU + default "armv7" + +config SYS_SOC + default "s5pc1xx" + +source "board/samsung/goni/Kconfig" +source "board/samsung/smdkc100/Kconfig" + +endif diff --git a/arch/arm/cpu/armv7/s5pc1xx/cache.S b/arch/arm/cpu/armv7/s5pc1xx/cache.S deleted file mode 100644 index 3089592eb1..0000000000 --- a/arch/arm/cpu/armv7/s5pc1xx/cache.S +++ /dev/null @@ -1,30 +0,0 @@ -/* - * Copyright (C) 2009 Samsung Electronics - * Minkyu Kang <mk7.kang@samsung.com> - * - * based on arch/arm/cpu/armv7/omap3/cache.S - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -.align 5 - -#include <linux/linkage.h> - -#ifndef CONFIG_SYS_L2CACHE_OFF -ENTRY(v7_outer_cache_enable) - push {r0, r1, r2, lr} - mrc 15, 0, r3, cr1, cr0, 1 - orr r3, r3, #2 - mcr 15, 0, r3, cr1, cr0, 1 - pop {r1, r2, r3, pc} -ENDPROC(v7_outer_cache_enable) - -ENTRY(v7_outer_cache_disable) - push {r0, r1, r2, lr} - mrc 15, 0, r3, cr1, cr0, 1 - bic r3, r3, #2 - mcr 15, 0, r3, cr1, cr0, 1 - pop {r1, r2, r3, pc} -ENDPROC(v7_outer_cache_disable) -#endif diff --git a/arch/arm/cpu/armv7/s5pc1xx/cache.c b/arch/arm/cpu/armv7/s5pc1xx/cache.c new file mode 100644 index 0000000000..51af2990c2 --- /dev/null +++ b/arch/arm/cpu/armv7/s5pc1xx/cache.c @@ -0,0 +1,47 @@ +/* + * Copyright (C) 2014 Samsung Electronics + * Minkyu Kang <mk7.kang@samsung.com> + * Robert Baldyga <r.baldyga@samsung.com> + * + * based on arch/arm/cpu/armv7/omap3/cache.S + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> + +#ifndef CONFIG_SYS_DCACHE_OFF +void enable_caches(void) +{ + dcache_enable(); +} + +void disable_caches(void) +{ + dcache_disable(); +} +#endif + +#ifndef CONFIG_SYS_L2CACHE_OFF +void v7_outer_cache_enable(void) +{ + __asm( + "push {r0, r1, r2, lr}\n\t" + "mrc 15, 0, r3, cr1, cr0, 1\n\t" + "orr r3, r3, #2\n\t" + "mcr 15, 0, r3, cr1, cr0, 1\n\t" + "pop {r1, r2, r3, pc}" + ); +} + +void v7_outer_cache_disable(void) +{ + __asm( + "push {r0, r1, r2, lr}\n\t" + "mrc 15, 0, r3, cr1, cr0, 1\n\t" + "bic r3, r3, #2\n\t" + "mcr 15, 0, r3, cr1, cr0, 1\n\t" + "pop {r1, r2, r3, pc}" + ); +} +#endif diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 5f2b946fdd..c37580ed84 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -1,4 +1,7 @@ +dtb-$(CONFIG_S5PC100) += s5pc1xx-smdkc100.dtb +dtb-$(CONFIG_S5PC110) += s5pc1xx-goni.dtb dtb-$(CONFIG_EXYNOS4) += exynos4210-origen.dtb \ + exynos4210-smdkv310.dtb \ exynos4210-universal_c210.dtb \ exynos4210-trats.dtb \ exynos4412-trats2.dtb \ diff --git a/arch/arm/dts/exynos4210-smdkv310.dts b/arch/arm/dts/exynos4210-smdkv310.dts new file mode 100644 index 0000000000..c390c8f0c8 --- /dev/null +++ b/arch/arm/dts/exynos4210-smdkv310.dts @@ -0,0 +1,21 @@ +/* + * Samsung's Exynos4210-based SMDKV310 board device tree source + * + * Copyright (c) 2014 Google, Inc + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/dts-v1/; +/include/ "exynos4.dtsi" + +/ { + model = "Samsung SMDKV310 on Exynos4210"; + compatible = "samsung,smdkv310", "samsung,exynos4210"; + + aliases { + serial0 = "/serial@13800000"; + console = "/serial@13820000"; + }; + +}; diff --git a/arch/arm/dts/exynos5420-peach-pit.dts b/arch/arm/dts/exynos5420-peach-pit.dts index 3ed70a8a92..995e62b337 100644 --- a/arch/arm/dts/exynos5420-peach-pit.dts +++ b/arch/arm/dts/exynos5420-peach-pit.dts @@ -28,11 +28,66 @@ pmic = "/i2c@12ca0000"; }; + cros-ec-keyb { + compatible = "google,cros-ec-keyb"; + google,key-rows = <8>; + google,key-columns = <13>; + google,repeat-delay-ms = <240>; + google,repeat-rate-ms = <30>; + google,ghost-filter; + /* + * Keymap entries take the form of 0xRRCCKKKK where + * RR=Row CC=Column KKKK=Key Code + * The values below are for a US keyboard layout and + * are taken from the Linux driver. Note that the + * 102ND key is not used for US keyboards. + */ + linux,keymap = < + /* CAPSLCK F1 B F10 */ + 0x0001003a 0x0002003b 0x00030030 0x00040044 + /* N = R_ALT ESC */ + 0x00060031 0x0008000d 0x000a0064 0x01010001 + /* F4 G F7 H */ + 0x0102003e 0x01030022 0x01040041 0x01060023 + /* ' F9 BKSPACE L_CTRL */ + 0x01080028 0x01090043 0x010b000e 0x0200001d + /* TAB F3 T F6 */ + 0x0201000f 0x0202003d 0x02030014 0x02040040 + /* ] Y 102ND [ */ + 0x0205001b 0x02060015 0x02070056 0x0208001a + /* F8 GRAVE F2 5 */ + 0x02090042 0x03010029 0x0302003c 0x03030006 + /* F5 6 - \ */ + 0x0304003f 0x03060007 0x0308000c 0x030b002b + /* R_CTRL A D F */ + 0x04000061 0x0401001e 0x04020020 0x04030021 + /* S K J ; */ + 0x0404001f 0x04050025 0x04060024 0x04080027 + /* L ENTER Z C */ + 0x04090026 0x040b001c 0x0501002c 0x0502002e + /* V X , M */ + 0x0503002f 0x0504002d 0x05050033 0x05060032 + /* L_SHIFT / . SPACE */ + 0x0507002a 0x05080035 0x05090034 0x050B0039 + /* 1 3 4 2 */ + 0x06010002 0x06020004 0x06030005 0x06040003 + /* 8 7 0 9 */ + 0x06050009 0x06060008 0x0608000b 0x0609000a + /* L_ALT DOWN RIGHT Q */ + 0x060a0038 0x060b006c 0x060c006a 0x07010010 + /* E R W I */ + 0x07020012 0x07030013 0x07040011 0x07050017 + /* U R_SHIFT P O */ + 0x07060016 0x07070036 0x07080019 0x07090018 + /* UP LEFT */ + 0x070b0067 0x070c0069>; + }; + dmc { mem-manuf = "samsung"; mem-type = "ddr3"; clock-frequency = <800000000>; - arm-frequency = <1700000000>; + arm-frequency = <900000000>; }; tmu@10060000 { diff --git a/arch/arm/dts/s5pc1xx-goni.dts b/arch/arm/dts/s5pc1xx-goni.dts new file mode 100644 index 0000000000..2e671bbf7e --- /dev/null +++ b/arch/arm/dts/s5pc1xx-goni.dts @@ -0,0 +1,28 @@ +/* + * Samsung's S5PC110-based Goni board device tree source + * + * Copyright (c) 2014 Google, Inc + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/dts-v1/; + +#include "skeleton.dtsi" + +/ { + model = "Samsung Goni based on S5PC110"; + compatible = "samsung,goni", "samsung,s5pc110"; + + aliases { + serial2 = "/serial@e2900800"; + console = "/serial@e2900800"; + }; + + serial@e2900800 { + compatible = "samsung,exynos4210-uart"; + reg = <0xe2900800 0x400>; + id = <2>; + }; + +}; diff --git a/arch/arm/dts/s5pc1xx-smdkc100.dts b/arch/arm/dts/s5pc1xx-smdkc100.dts new file mode 100644 index 0000000000..42754ce811 --- /dev/null +++ b/arch/arm/dts/s5pc1xx-smdkc100.dts @@ -0,0 +1,29 @@ +/* + * Samsung's Exynos4210-based SMDKV310 board device tree source + * + * Copyright (c) 2014 Google, Inc + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/dts-v1/; + +#include "skeleton.dtsi" + +/ { + model = "Samsung SMDKC100 based on S5PC100"; + compatible = "samsung,smdkc100", "samsung,s5pc100"; + + aliases { + serial0 = "/serial@ec000000"; + console = "/serial@ec000000"; + }; + + serial@ec000000 { + compatible = "samsung,exynos4210-uart"; + reg = <0xec000000 0x100>; + interrupts = <0 51 0>; + id = <0>; + }; + +}; diff --git a/arch/arm/include/asm/arch-mx31/imx-regs.h b/arch/arm/include/asm/arch-mx31/imx-regs.h index f23350e5c2..71ebd243d7 100644 --- a/arch/arm/include/asm/arch-mx31/imx-regs.h +++ b/arch/arm/include/asm/arch-mx31/imx-regs.h @@ -909,9 +909,19 @@ struct esdc_regs { #define MXC_CSPIPERIOD_32KHZ (1 << 15) #define MAX_SPI_BYTES 4 + #define MXC_SPI_BASE_ADDRESSES \ 0x43fa4000, \ 0x50010000, \ 0x53f84000, +/* + * Generic timer support + */ +#ifdef CONFIG_MX31_CLK32 +#define CONFIG_SYS_TIMER_RATE CONFIG_MX31_CLK32 +#else +#define CONFIG_SYS_TIMER_RATE 32768 +#endif + #endif /* __ASM_ARCH_MX31_IMX_REGS_H */ diff --git a/arch/arm/include/asm/arch-mx35/imx-regs.h b/arch/arm/include/asm/arch-mx35/imx-regs.h index b5300291a9..28a47ed44d 100644 --- a/arch/arm/include/asm/arch-mx35/imx-regs.h +++ b/arch/arm/include/asm/arch-mx35/imx-regs.h @@ -372,4 +372,16 @@ struct aips_regs { #define CCM_RCSR_NF_16BIT_SEL (1 << 14) #endif + +/* + * Generic timer support + */ +#ifdef CONFIG_MX35_CLK32 +#define CONFIG_SYS_TIMER_RATE CONFIG_MX35_CLK32 +#else +#define CONFIG_SYS_TIMER_RATE 32768 +#endif + +#define CONFIG_SYS_TIMER_COUNTER (GPT1_BASE_ADDR+36) + #endif /* __ASM_ARCH_MX35_H */ diff --git a/arch/arm/include/asm/arch-mx6/clock.h b/arch/arm/include/asm/arch-mx6/clock.h index c11674ff8a..3c58a0ab60 100644 --- a/arch/arm/include/asm/arch-mx6/clock.h +++ b/arch/arm/include/asm/arch-mx6/clock.h @@ -53,6 +53,7 @@ u32 imx_get_uartclk(void); u32 imx_get_fecclk(void); unsigned int mxc_get_clock(enum mxc_clock clk); void setup_gpmi_io_clk(u32 cfg); +void hab_caam_clock_enable(unsigned char enable); void enable_ocotp_clk(unsigned char enable); void enable_usboh3_clk(unsigned char enable); void enable_uart_clk(unsigned char enable); diff --git a/arch/arm/include/asm/arch-mx6/hab.h b/arch/arm/include/asm/arch-mx6/hab.h index 1f12695f67..c9e5318bfb 100644 --- a/arch/arm/include/asm/arch-mx6/hab.h +++ b/arch/arm/include/asm/arch-mx6/hab.h @@ -53,11 +53,17 @@ typedef void *hab_rvt_authenticate_image_t(uint8_t, ptrdiff_t, void **, size_t *, hab_loader_callback_f_t); typedef void hapi_clock_init_t(void); -#define HAB_RVT_REPORT_EVENT (*(uint32_t *)0x000000B4) -#define HAB_RVT_REPORT_STATUS (*(uint32_t *)0x000000B8) -#define HAB_RVT_AUTHENTICATE_IMAGE (*(uint32_t *)0x000000A4) -#define HAB_RVT_ENTRY (*(uint32_t *)0x00000098) -#define HAB_RVT_EXIT (*(uint32_t *)0x0000009C) +#ifdef CONFIG_MX6SX +#define HAB_RVT_BASE 0x00000100 +#else +#define HAB_RVT_BASE 0x00000094 +#endif + +#define HAB_RVT_ENTRY (*(uint32_t *)(HAB_RVT_BASE + 0x04)) +#define HAB_RVT_EXIT (*(uint32_t *)(HAB_RVT_BASE + 0x08)) +#define HAB_RVT_AUTHENTICATE_IMAGE (*(uint32_t *)(HAB_RVT_BASE + 0x10)) +#define HAB_RVT_REPORT_EVENT (*(uint32_t *)(HAB_RVT_BASE + 0x20)) +#define HAB_RVT_REPORT_STATUS (*(uint32_t *)(HAB_RVT_BASE + 0x24)) #define HAB_RVT_REPORT_EVENT_NEW (*(uint32_t *)0x000000B8) #define HAB_RVT_REPORT_STATUS_NEW (*(uint32_t *)0x000000BC) diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h b/arch/arm/include/asm/arch-mx6/imx-regs.h index 22614fcd0e..a159309bb9 100644 --- a/arch/arm/include/asm/arch-mx6/imx-regs.h +++ b/arch/arm/include/asm/arch-mx6/imx-regs.h @@ -215,13 +215,8 @@ #define AIPS2_OFF_BASE_ADDR (ATZ2_BASE_ADDR + 0x80000) #define CAAM_BASE_ADDR (ATZ2_BASE_ADDR) #define ARM_BASE_ADDR (ATZ2_BASE_ADDR + 0x40000) -#ifdef CONFIG_MX6SL -#define USBO2H_PL301_IPS_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x0000) -#define USBO2H_USB_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x4000) -#else -#define USBOH3_PL301_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x0000) -#define USBOH3_USB_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x4000) -#endif +#define USB_PL301_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x0000) +#define USB_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x4000) #define ENET_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x8000) #ifdef CONFIG_MX6SL diff --git a/arch/arm/include/asm/arch-s5pc1xx/periph.h b/arch/arm/include/asm/arch-s5pc1xx/periph.h new file mode 100644 index 0000000000..5c1c3d4a93 --- /dev/null +++ b/arch/arm/include/asm/arch-s5pc1xx/periph.h @@ -0,0 +1,61 @@ +/* + * Copyright (C) 2012 Samsung Electronics + * Rajeshwari Shinde <rajeshwari.s@samsung.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __ASM_ARM_ARCH_PERIPH_H +#define __ASM_ARM_ARCH_PERIPH_H + +/* + * Peripherals required for pinmux configuration. List will + * grow with support for more devices getting added. + * Numbering based on interrupt table. + * + */ +enum periph_id { + PERIPH_ID_UART0 = 51, + PERIPH_ID_UART1, + PERIPH_ID_UART2, + PERIPH_ID_UART3, + PERIPH_ID_I2C0 = 56, + PERIPH_ID_I2C1, + PERIPH_ID_I2C2, + PERIPH_ID_I2C3, + PERIPH_ID_I2C4, + PERIPH_ID_I2C5, + PERIPH_ID_I2C6, + PERIPH_ID_I2C7, + PERIPH_ID_SPI0 = 68, + PERIPH_ID_SPI1, + PERIPH_ID_SPI2, + PERIPH_ID_SDMMC0 = 75, + PERIPH_ID_SDMMC1, + PERIPH_ID_SDMMC2, + PERIPH_ID_SDMMC3, + PERIPH_ID_I2C8 = 87, + PERIPH_ID_I2C9, + PERIPH_ID_I2S0 = 98, + PERIPH_ID_I2S1 = 99, + + /* Since following peripherals do + * not have shared peripheral interrupts (SPIs) + * they are numbered arbitiraly after the maximum + * SPIs Exynos has (128) + */ + PERIPH_ID_SROMC = 128, + PERIPH_ID_SPI3, + PERIPH_ID_SPI4, + PERIPH_ID_SDMMC4, + PERIPH_ID_PWM0, + PERIPH_ID_PWM1, + PERIPH_ID_PWM2, + PERIPH_ID_PWM3, + PERIPH_ID_PWM4, + PERIPH_ID_I2C10 = 203, + + PERIPH_ID_NONE = -1, +}; + +#endif /* __ASM_ARM_ARCH_PERIPH_H */ diff --git a/arch/arm/include/asm/arch-s5pc1xx/pinmux.h b/arch/arm/include/asm/arch-s5pc1xx/pinmux.h new file mode 100644 index 0000000000..0b91ef658c --- /dev/null +++ b/arch/arm/include/asm/arch-s5pc1xx/pinmux.h @@ -0,0 +1,50 @@ +/* + * Copyright (C) 2012 Samsung Electronics + * Abhilash Kesavan <a.kesavan@samsung.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __ASM_ARM_ARCH_PINMUX_H +#define __ASM_ARM_ARCH_PINMUX_H + +#include "periph.h" + +/* + * Flags for setting specific configarations of peripherals. + * List will grow with support for more devices getting added. + */ +enum { + PINMUX_FLAG_NONE = 0x00000000, + + /* Flags for eMMC */ + PINMUX_FLAG_8BIT_MODE = 1 << 0, /* SDMMC 8-bit mode */ + + /* Flags for SROM controller */ + PINMUX_FLAG_BANK = 3 << 0, /* bank number (0-3) */ + PINMUX_FLAG_16BIT = 1 << 2, /* 16-bit width */ +}; + +/** + * Configures the pinmux for a particular peripheral. + * + * Each gpio can be configured in many different ways (4 bits on exynos) + * such as "input", "output", "special function", "external interrupt" + * etc. This function will configure the peripheral pinmux along with + * pull-up/down and drive strength. + * + * @param peripheral peripheral to be configured + * @param flags configure flags + * @return 0 if ok, -1 on error (e.g. unsupported peripheral) + */ +int exynos_pinmux_config(int peripheral, int flags); + +/** + * Decode the peripheral id using the interrpt numbers. + * + * @param blob Device tree blob + * @param node FDT I2C node to find + * @return peripheral id if ok, PERIPH_ID_NONE on error + */ +int pinmux_decode_periph_id(const void *blob, int node); +#endif |