diff options
Diffstat (limited to 'arch')
| -rw-r--r-- | arch/blackfin/cpu/Makefile | 1 | ||||
| -rw-r--r-- | arch/blackfin/cpu/cpu.c | 2 | ||||
| -rw-r--r-- | arch/blackfin/cpu/initcode.c | 5 | ||||
| -rw-r--r-- | arch/blackfin/cpu/serial.c | 412 | ||||
| -rw-r--r-- | arch/blackfin/cpu/start.S | 3 | ||||
| -rw-r--r-- | arch/blackfin/include/asm/serial.h (renamed from arch/blackfin/cpu/serial.h) | 0 | ||||
| -rw-r--r-- | arch/blackfin/include/asm/serial1.h (renamed from arch/blackfin/cpu/serial1.h) | 0 | ||||
| -rw-r--r-- | arch/blackfin/include/asm/serial4.h (renamed from arch/blackfin/cpu/serial4.h) | 0 |
8 files changed, 4 insertions, 419 deletions
diff --git a/arch/blackfin/cpu/Makefile b/arch/blackfin/cpu/Makefile index 145f63eea7..929fc8b7ce 100644 --- a/arch/blackfin/cpu/Makefile +++ b/arch/blackfin/cpu/Makefile @@ -23,7 +23,6 @@ COBJS-y += interrupts.o COBJS-$(CONFIG_JTAG_CONSOLE) += jtag-console.o COBJS-y += os_log.o COBJS-y += reset.o -COBJS-y += serial.o COBJS-y += traps.o SRCS := $(SEXTRA:.o=.S) $(SOBJS:.o=.S) $(COBJS-y:.o=.c) diff --git a/arch/blackfin/cpu/cpu.c b/arch/blackfin/cpu/cpu.c index d841f64c82..218f57ed38 100644 --- a/arch/blackfin/cpu/cpu.c +++ b/arch/blackfin/cpu/cpu.c @@ -16,9 +16,9 @@ #include <asm/mach-common/bits/core.h> #include <asm/mach-common/bits/ebiu.h> #include <asm/mach-common/bits/trace.h> +#include <asm/serial.h> #include "cpu.h" -#include "serial.h" #include "initcode.h" ulong bfin_poweron_retx; diff --git a/arch/blackfin/cpu/initcode.c b/arch/blackfin/cpu/initcode.c index 078209fc24..5fc06e11ff 100644 --- a/arch/blackfin/cpu/initcode.c +++ b/arch/blackfin/cpu/initcode.c @@ -16,10 +16,9 @@ #include <asm/mach-common/bits/watchdog.h> #include <asm/mach-common/bits/bootrom.h> #include <asm/mach-common/bits/core.h> +#include <asm/serial.h> -#define BUG() while (1) { asm volatile("emuexcpt;"); } - -#include "serial.h" +#define BUG() while (1) asm volatile("emuexcpt;"); #ifndef __ADSPBF60x__ #include <asm/mach-common/bits/ebiu.h> diff --git a/arch/blackfin/cpu/serial.c b/arch/blackfin/cpu/serial.c deleted file mode 100644 index c453a03c0c..0000000000 --- a/arch/blackfin/cpu/serial.c +++ /dev/null @@ -1,412 +0,0 @@ -/* - * U-boot - serial.c Blackfin Serial Driver - * - * Copyright (c) 2005-2008 Analog Devices Inc. - * - * Copyright (c) 2003 Bas Vermeulen <bas@buyways.nl>, - * BuyWays B.V. (www.buyways.nl) - * - * Based heavily on: - * blkfinserial.c: Serial driver for BlackFin DSP internal USRTs. - * Copyright(c) 2003 Metrowerks <mwaddel@metrowerks.com> - * Copyright(c) 2001 Tony Z. Kou <tonyko@arcturusnetworks.com> - * Copyright(c) 2001-2002 Arcturus Networks Inc. <www.arcturusnetworks.com> - * - * Based on code from 68328 version serial driver imlpementation which was: - * Copyright (C) 1995 David S. Miller <davem@caip.rutgers.edu> - * Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com> - * Copyright (C) 1998, 1999 D. Jeff Dionne <jeff@uclinux.org> - * Copyright (C) 1999 Vladimir Gurevich <vgurevic@cisco.com> - * - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * Licensed under the GPL-2 or later. - */ - -/* Anomaly notes: - * 05000086 - we don't support autobaud - * 05000099 - we only use DR bit, so losing others is not a problem - * 05000100 - we don't use the UART_IIR register - * 05000215 - we poll the uart (no dma/interrupts) - * 05000225 - no workaround possible, but this shouldnt cause errors ... - * 05000230 - we tweak the baud rate calculation slightly - * 05000231 - we always use 1 stop bit - * 05000309 - we always enable the uart before we modify it in anyway - * 05000350 - we always enable the uart regardless of boot mode - * 05000363 - we don't support break signals, so don't generate one - */ - -#include <common.h> -#include <post.h> -#include <watchdog.h> -#include <serial.h> -#include <linux/compiler.h> -#include <asm/blackfin.h> - -DECLARE_GLOBAL_DATA_PTR; - -#ifdef CONFIG_UART_CONSOLE - -#include "serial.h" - -#ifdef CONFIG_DEBUG_SERIAL -static uart_lsr_t cached_lsr[256]; -static uart_lsr_t cached_rbr[256]; -static size_t cache_count; - -/* The LSR is read-to-clear on some parts, so we have to make sure status - * bits aren't inadvertently lost when doing various tests. This also - * works around anomaly 05000099 at the same time by keeping a cumulative - * tally of all the status bits. - */ -static uart_lsr_t uart_lsr_save; -static uart_lsr_t uart_lsr_read(uint32_t uart_base) -{ - uart_lsr_t lsr = _lsr_read(pUART); - uart_lsr_save |= (lsr & (OE|PE|FE|BI)); - return lsr | uart_lsr_save; -} -/* Just do the clear for everyone since it can't hurt. */ -static void uart_lsr_clear(uint32_t uart_base) -{ - uart_lsr_save = 0; - _lsr_write(pUART, -1); -} -#else -/* When debugging is disabled, we only care about the DR bit, so if other - * bits get set/cleared, we don't really care since we don't read them - * anyways (and thus anomaly 05000099 is irrelevant). - */ -static inline uart_lsr_t uart_lsr_read(uint32_t uart_base) -{ - return _lsr_read(pUART); -} -static void uart_lsr_clear(uint32_t uart_base) -{ - _lsr_write(pUART, -1); -} -#endif - -static void uart_putc(uint32_t uart_base, const char c) -{ - /* send a \r for compatibility */ - if (c == '\n') - serial_putc('\r'); - - WATCHDOG_RESET(); - - /* wait for the hardware fifo to clear up */ - while (!(uart_lsr_read(uart_base) & THRE)) - continue; - - /* queue the character for transmission */ - bfin_write(&pUART->thr, c); - SSYNC(); - - WATCHDOG_RESET(); -} - -static int uart_tstc(uint32_t uart_base) -{ - WATCHDOG_RESET(); - return (uart_lsr_read(uart_base) & DR) ? 1 : 0; -} - -static int uart_getc(uint32_t uart_base) -{ - uint16_t uart_rbr_val; - - /* wait for data ! */ - while (!uart_tstc(uart_base)) - continue; - - /* grab the new byte */ - uart_rbr_val = bfin_read(&pUART->rbr); - -#ifdef CONFIG_DEBUG_SERIAL - /* grab & clear the LSR */ - uart_lsr_t uart_lsr_val = uart_lsr_read(uart_base); - - cached_lsr[cache_count] = uart_lsr_val; - cached_rbr[cache_count] = uart_rbr_val; - cache_count = (cache_count + 1) % ARRAY_SIZE(cached_lsr); - - if (uart_lsr_val & (OE|PE|FE|BI)) { - printf("\n[SERIAL ERROR]\n"); - do { - --cache_count; - printf("\t%3zu: RBR=0x%02x LSR=0x%02x\n", cache_count, - cached_rbr[cache_count], cached_lsr[cache_count]); - } while (cache_count > 0); - return -1; - } -#endif - uart_lsr_clear(uart_base); - - return uart_rbr_val; -} - -#if CONFIG_POST & CONFIG_SYS_POST_UART -# define LOOP(x) x -#else -# define LOOP(x) -#endif - -#if BFIN_UART_HW_VER < 4 - -LOOP( -static void uart_loop(uint32_t uart_base, int state) -{ - u16 mcr; - - /* Drain the TX fifo first so bytes don't come back */ - while (!(uart_lsr_read(uart_base) & TEMT)) - continue; - - mcr = bfin_read(&pUART->mcr); - if (state) - mcr |= LOOP_ENA | MRTS; - else - mcr &= ~(LOOP_ENA | MRTS); - bfin_write(&pUART->mcr, mcr); -} -) - -#else - -LOOP( -static void uart_loop(uint32_t uart_base, int state) -{ - u32 control; - - /* Drain the TX fifo first so bytes don't come back */ - while (!(uart_lsr_read(uart_base) & TEMT)) - continue; - - control = bfin_read(&pUART->control); - if (state) - control |= LOOP_ENA | MRTS; - else - control &= ~(LOOP_ENA | MRTS); - bfin_write(&pUART->control, control); -} -) - -#endif - -static inline void __serial_set_baud(uint32_t uart_base, uint32_t baud) -{ -#ifdef CONFIG_DEBUG_EARLY_SERIAL - serial_early_set_baud(uart_base, baud); -#else - uint16_t divisor = (get_uart_clk() + (baud * 8)) / (baud * 16) - - ANOMALY_05000230; - - /* Program the divisor to get the baud rate we want */ - serial_set_divisor(uart_base, divisor); -#endif -} - -static void uart_puts(uint32_t uart_base, const char *s) -{ - while (*s) - uart_putc(uart_base, *s++); -} - -#define DECL_BFIN_UART(n) \ -static int uart##n##_init(void) \ -{ \ - const unsigned short pins[] = { _P_UART(n, RX), _P_UART(n, TX), 0, }; \ - peripheral_request_list(pins, "bfin-uart"); \ - uart_init(MMR_UART(n)); \ - __serial_set_baud(MMR_UART(n), gd->baudrate); \ - uart_lsr_clear(MMR_UART(n)); \ - return 0; \ -} \ -\ -static int uart##n##_uninit(void) \ -{ \ - return serial_early_uninit(MMR_UART(n)); \ -} \ -\ -static void uart##n##_setbrg(void) \ -{ \ - __serial_set_baud(MMR_UART(n), gd->baudrate); \ -} \ -\ -static int uart##n##_getc(void) \ -{ \ - return uart_getc(MMR_UART(n)); \ -} \ -\ -static int uart##n##_tstc(void) \ -{ \ - return uart_tstc(MMR_UART(n)); \ -} \ -\ -static void uart##n##_putc(const char c) \ -{ \ - uart_putc(MMR_UART(n), c); \ -} \ -\ -static void uart##n##_puts(const char *s) \ -{ \ - uart_puts(MMR_UART(n), s); \ -} \ -\ -LOOP( \ -static void uart##n##_loop(int state) \ -{ \ - uart_loop(MMR_UART(n), state); \ -} \ -) \ -\ -struct serial_device bfin_serial##n##_device = { \ - .name = "bfin_uart"#n, \ - .start = uart##n##_init, \ - .stop = uart##n##_uninit, \ - .setbrg = uart##n##_setbrg, \ - .getc = uart##n##_getc, \ - .tstc = uart##n##_tstc, \ - .putc = uart##n##_putc, \ - .puts = uart##n##_puts, \ - LOOP(.loop = uart##n##_loop) \ -}; - -#ifdef UART0_RBR -DECL_BFIN_UART(0) -#endif -#ifdef UART1_RBR -DECL_BFIN_UART(1) -#endif -#ifdef UART2_RBR -DECL_BFIN_UART(2) -#endif -#ifdef UART3_RBR -DECL_BFIN_UART(3) -#endif - -__weak struct serial_device *default_serial_console(void) -{ -#if CONFIG_UART_CONSOLE == 0 - return &bfin_serial0_device; -#elif CONFIG_UART_CONSOLE == 1 - return &bfin_serial1_device; -#elif CONFIG_UART_CONSOLE == 2 - return &bfin_serial2_device; -#elif CONFIG_UART_CONSOLE == 3 - return &bfin_serial3_device; -#endif -} - -void bfin_serial_initialize(void) -{ -#ifdef UART0_RBR - serial_register(&bfin_serial0_device); -#endif -#ifdef UART1_RBR - serial_register(&bfin_serial1_device); -#endif -#ifdef UART2_RBR - serial_register(&bfin_serial2_device); -#endif -#ifdef UART3_RBR - serial_register(&bfin_serial3_device); -#endif -} - -#ifdef CONFIG_DEBUG_EARLY_SERIAL -inline void uart_early_putc(uint32_t uart_base, const char c) -{ - /* send a \r for compatibility */ - if (c == '\n') - uart_early_putc(uart_base, '\r'); - - /* wait for the hardware fifo to clear up */ - while (!(_lsr_read(pUART) & THRE)) - continue; - - /* queue the character for transmission */ - bfin_write(&pUART->thr, c); - SSYNC(); -} - -void uart_early_puts(const char *s) -{ - while (*s) - uart_early_putc(UART_BASE, *s++); -} - -/* Symbol for our assembly to call. */ -void _serial_early_set_baud(uint32_t baud) -{ - serial_early_set_baud(UART_BASE, baud); -} - -/* Symbol for our assembly to call. */ -void _serial_early_init(void) -{ - serial_early_init(UART_BASE); -} -#endif - -#elif defined(CONFIG_UART_MEM) - -char serial_logbuf[CONFIG_UART_MEM]; -char *serial_logbuf_head = serial_logbuf; - -int serial_mem_init(void) -{ - serial_logbuf_head = serial_logbuf; - return 0; -} - -void serial_mem_setbrg(void) -{ -} - -int serial_mem_tstc(void) -{ - return 0; -} - -int serial_mem_getc(void) -{ - return 0; -} - -void serial_mem_putc(const char c) -{ - *serial_logbuf_head = c; - if (++serial_logbuf_head == serial_logbuf + CONFIG_UART_MEM) - serial_logbuf_head = serial_logbuf; -} - -void serial_mem_puts(const char *s) -{ - while (*s) - serial_putc(*s++); -} - -struct serial_device bfin_serial_mem_device = { - .name = "bfin_uart_mem", - .start = serial_mem_init, - .setbrg = serial_mem_setbrg, - .getc = serial_mem_getc, - .tstc = serial_mem_tstc, - .putc = serial_mem_putc, - .puts = serial_mem_puts, -}; - - -__weak struct serial_device *default_serial_console(void) -{ - return &bfin_serial_mem_device; -} - -void bfin_serial_initialize(void) -{ - serial_register(&bfin_serial_mem_device); -} -#endif /* CONFIG_UART_MEM */ diff --git a/arch/blackfin/cpu/start.S b/arch/blackfin/cpu/start.S index 1c6ae35275..da084a87c6 100644 --- a/arch/blackfin/cpu/start.S +++ b/arch/blackfin/cpu/start.S @@ -35,8 +35,7 @@ #include <asm/mach-common/bits/watchdog.h> #include <asm/mach-common/bits/core.h> #include <asm/mach-common/bits/pll.h> - -#include "serial.h" +#include <asm/serial.h> /* It may seem odd that we make calls to functions even though we haven't * relocated ourselves yet out of {flash,ram,wherever}. This is OK because diff --git a/arch/blackfin/cpu/serial.h b/arch/blackfin/include/asm/serial.h index 87a337d1b4..87a337d1b4 100644 --- a/arch/blackfin/cpu/serial.h +++ b/arch/blackfin/include/asm/serial.h diff --git a/arch/blackfin/cpu/serial1.h b/arch/blackfin/include/asm/serial1.h index 467d3817f1..467d3817f1 100644 --- a/arch/blackfin/cpu/serial1.h +++ b/arch/blackfin/include/asm/serial1.h diff --git a/arch/blackfin/cpu/serial4.h b/arch/blackfin/include/asm/serial4.h index 65483960b9..65483960b9 100644 --- a/arch/blackfin/cpu/serial4.h +++ b/arch/blackfin/include/asm/serial4.h |