diff options
Diffstat (limited to 'arch')
113 files changed, 5259 insertions, 1284 deletions
diff --git a/arch/arm/cpu/arm1136/config.mk b/arch/arm/cpu/arm1136/config.mk index efee0d1dca..9092d914f6 100644 --- a/arch/arm/cpu/arm1136/config.mk +++ b/arch/arm/cpu/arm1136/config.mk @@ -31,3 +31,6 @@ PLATFORM_CPPFLAGS += -march=armv5 # ========================================================================= PF_RELFLAGS_SLB_AT := $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) PLATFORM_RELFLAGS += $(PF_RELFLAGS_SLB_AT) +ifdef CONFIG_SPL_BUILD +ALL-y += $(OBJTREE)/SPL +endif diff --git a/arch/arm/cpu/arm1136/cpu.c b/arch/arm/cpu/arm1136/cpu.c index b98e3d9fac..32a4c244c5 100644 --- a/arch/arm/cpu/arm1136/cpu.c +++ b/arch/arm/cpu/arm1136/cpu.c @@ -141,16 +141,6 @@ void flush_cache(unsigned long start, unsigned long size) flush_dcache_range(start, start + size); } -void enable_caches(void) -{ -#ifndef CONFIG_SYS_ICACHE_OFF - icache_enable(); -#endif -#ifndef CONFIG_SYS_DCACHE_OFF - dcache_enable(); -#endif -} - #else /* #ifndef CONFIG_SYS_DCACHE_OFF */ void invalidate_dcache_all(void) { @@ -172,3 +162,15 @@ void flush_cache(unsigned long start, unsigned long size) { } #endif /* #ifndef CONFIG_SYS_DCACHE_OFF */ + +#if !defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF) +void enable_caches(void) +{ +#ifndef CONFIG_SYS_ICACHE_OFF + icache_enable(); +#endif +#ifndef CONFIG_SYS_DCACHE_OFF + dcache_enable(); +#endif +} +#endif diff --git a/arch/arm/cpu/arm1136/mx31/timer.c b/arch/arm/cpu/arm1136/mx31/timer.c index 36266da5aa..86916d1edb 100644 --- a/arch/arm/cpu/arm1136/mx31/timer.c +++ b/arch/arm/cpu/arm1136/mx31/timer.c @@ -161,42 +161,3 @@ ulong get_tbclk(void) { return MXC_CLK32; } - -void reset_cpu(ulong addr) -{ - struct wdog_regs *wdog = (struct wdog_regs *)WDOG_BASE; - wdog->wcr = WDOG_ENABLE; - while (1) - ; -} - -#ifdef CONFIG_HW_WATCHDOG -void mxc_hw_watchdog_enable(void) -{ - struct wdog_regs *wdog = (struct wdog_regs *)WDOG_BASE; - u16 secs; - - /* - * The timer watchdog can be set between - * 0.5 and 128 Seconds. If not defined - * in configuration file, sets 64 Seconds - */ -#ifdef CONFIG_SYS_WD_TIMER_SECS - secs = (CONFIG_SYS_WD_TIMER_SECS << 1) & 0xFF; - if (!secs) secs = 1; -#else - secs = 64; -#endif - setbits_le16(&wdog->wcr, (secs << WDOG_WT_SHIFT) | WDOG_ENABLE - | WDOG_WDZST); -} - - -void mxc_hw_watchdog_reset(void) -{ - struct wdog_regs *wdog = (struct wdog_regs *)WDOG_BASE; - - writew(0x5555, &wdog->wsr); - writew(0xAAAA, &wdog->wsr); -} -#endif diff --git a/arch/arm/cpu/arm1136/mx35/Makefile b/arch/arm/cpu/arm1136/mx35/Makefile index 469397ca43..f4ababbe5b 100644 --- a/arch/arm/cpu/arm1136/mx35/Makefile +++ b/arch/arm/cpu/arm1136/mx35/Makefile @@ -30,6 +30,7 @@ LIB = $(obj)lib$(SOC).o COBJS += generic.o COBJS += timer.o COBJS += iomux.o +COBJS += mx35_sdram.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) diff --git a/arch/arm/cpu/arm1136/mx35/generic.c b/arch/arm/cpu/arm1136/mx35/generic.c index 41e9639d9c..295a98ea4b 100644 --- a/arch/arm/cpu/arm1136/mx35/generic.c +++ b/arch/arm/cpu/arm1136/mx35/generic.c @@ -35,6 +35,7 @@ #include <fsl_esdhc.h> #endif #include <netdev.h> +#include <spl.h> #define CLK_CODE(arm, ahb, sel) (((arm) << 16) + ((ahb) << 8) + (sel)) #define CLK_CODE_ARM(c) (((c) >> 16) & 0xFF) @@ -487,8 +488,76 @@ int get_clocks(void) return 0; } -void reset_cpu(ulong addr) +#define RCSR_MEM_CTL_WEIM 0 +#define RCSR_MEM_CTL_NAND 1 +#define RCSR_MEM_CTL_ATA 2 +#define RCSR_MEM_CTL_EXPANSION 3 +#define RCSR_MEM_TYPE_NOR 0 +#define RCSR_MEM_TYPE_ONENAND 2 +#define RCSR_MEM_TYPE_SD 0 +#define RCSR_MEM_TYPE_I2C 2 +#define RCSR_MEM_TYPE_SPI 3 + +u32 spl_boot_device(void) { - struct wdog_regs *wdog = (struct wdog_regs *)WDOG_BASE_ADDR; - writew(4, &wdog->wcr); + struct ccm_regs *ccm = + (struct ccm_regs *)IMX_CCM_BASE; + + u32 rcsr = readl(&ccm->rcsr); + u32 mem_type, mem_ctl; + + /* In external mode, no boot device is returned */ + if ((rcsr >> 10) & 0x03) + return BOOT_DEVICE_NONE; + + mem_ctl = (rcsr >> 25) & 0x03; + mem_type = (rcsr >> 23) & 0x03; + + switch (mem_ctl) { + case RCSR_MEM_CTL_WEIM: + switch (mem_type) { + case RCSR_MEM_TYPE_NOR: + return BOOT_DEVICE_NOR; + case RCSR_MEM_TYPE_ONENAND: + return BOOT_DEVICE_ONE_NAND; + default: + return BOOT_DEVICE_NONE; + } + case RCSR_MEM_CTL_NAND: + return BOOT_DEVICE_NAND; + case RCSR_MEM_CTL_EXPANSION: + switch (mem_type) { + case RCSR_MEM_TYPE_SD: + return BOOT_DEVICE_MMC1; + case RCSR_MEM_TYPE_I2C: + return BOOT_DEVICE_I2C; + case RCSR_MEM_TYPE_SPI: + return BOOT_DEVICE_SPI; + default: + return BOOT_DEVICE_NONE; + } + } + + return BOOT_DEVICE_NONE; } + +#ifdef CONFIG_SPL_BUILD +u32 spl_boot_mode(void) +{ + switch (spl_boot_device()) { + case BOOT_DEVICE_MMC1: +#ifdef CONFIG_SPL_FAT_SUPPORT + return MMCSD_MODE_FAT; +#else + return MMCSD_MODE_RAW; +#endif + break; + case BOOT_DEVICE_NAND: + return 0; + break; + default: + puts("spl: ERROR: unsupported device\n"); + hang(); + } +} +#endif diff --git a/arch/arm/cpu/arm1136/mx35/mx35_sdram.c b/arch/arm/cpu/arm1136/mx35/mx35_sdram.c new file mode 100644 index 0000000000..f7e682c8c5 --- /dev/null +++ b/arch/arm/cpu/arm1136/mx35/mx35_sdram.c @@ -0,0 +1,137 @@ +/* + * Copyright (C) 2012, Stefano Babic <sbabic@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <asm/io.h> +#include <asm/errno.h> +#include <asm/arch/imx-regs.h> +#include <linux/types.h> +#include <asm/arch/sys_proto.h> + +#define ESDCTL_DDR2_EMR2 0x04000000 +#define ESDCTL_DDR2_EMR3 0x06000000 +#define ESDCTL_PRECHARGE 0x00000400 +#define ESDCTL_DDR2_EN_DLL 0x02000400 +#define ESDCTL_DDR2_RESET_DLL 0x00000333 +#define ESDCTL_DDR2_MR 0x00000233 +#define ESDCTL_DDR2_OCD_DEFAULT 0x02000780 + +enum { + SMODE_NORMAL = 0, + SMODE_PRECHARGE, + SMODE_AUTO_REFRESH, + SMODE_LOAD_REG, + SMODE_MANUAL_REFRESH +}; + +#define set_mode(x, en, m) (x | (en << 31) | (m << 28)) + +static inline void dram_wait(unsigned int count) +{ + volatile unsigned int wait = count; + + while (wait--) + ; + +} + +void mx3_setup_sdram_bank(u32 start_address, u32 ddr2_config, + u32 row, u32 col, u32 dsize, u32 refresh) +{ + struct esdc_regs *esdc = (struct esdc_regs *)ESDCTL_BASE_ADDR; + u32 *cfg_reg, *ctl_reg; + u32 val; + u32 ctlval; + + switch (start_address) { + case CSD0_BASE_ADDR: + cfg_reg = &esdc->esdcfg0; + ctl_reg = &esdc->esdctl0; + break; + case CSD1_BASE_ADDR: + cfg_reg = &esdc->esdcfg1; + ctl_reg = &esdc->esdctl1; + break; + default: + return; + } + + /* The MX35 supports 11 up to 14 rows */ + if (row < 11 || row > 14 || col < 8 || col > 10) + return; + ctlval = (row - 11) << 24 | (col - 8) << 20 | (dsize << 16); + + /* Initialize MISC register for DDR2 */ + val = ESDC_MISC_RST | ESDC_MISC_MDDR_EN | ESDC_MISC_MDDR_DL_RST | + ESDC_MISC_DDR_EN | ESDC_MISC_DDR2_EN; + writel(val, &esdc->esdmisc); + val &= ~(ESDC_MISC_RST | ESDC_MISC_MDDR_DL_RST); + writel(val, &esdc->esdmisc); + + /* + * according to DDR2 specs, wait a while before + * the PRECHARGE_ALL command + */ + dram_wait(0x20000); + + /* Load DDR2 config and timing */ + writel(ddr2_config, cfg_reg); + + /* Precharge ALL */ + writel(set_mode(ctlval, 1, SMODE_PRECHARGE), + ctl_reg); + writel(0xda, start_address + ESDCTL_PRECHARGE); + + /* Load mode */ + writel(set_mode(ctlval, 1, SMODE_LOAD_REG), + ctl_reg); + writeb(0xda, start_address + ESDCTL_DDR2_EMR2); /* EMRS2 */ + writeb(0xda, start_address + ESDCTL_DDR2_EMR3); /* EMRS3 */ + writeb(0xda, start_address + ESDCTL_DDR2_EN_DLL); /* Enable DLL */ + writeb(0xda, start_address + ESDCTL_DDR2_RESET_DLL); /* Reset DLL */ + + /* Precharge ALL */ + writel(set_mode(ctlval, 1, SMODE_PRECHARGE), + ctl_reg); + writel(0xda, start_address + ESDCTL_PRECHARGE); + + /* Set mode auto refresh : at least two refresh are required */ + writel(set_mode(ctlval, 1, SMODE_AUTO_REFRESH), + ctl_reg); + writel(0xda, start_address); + writel(0xda, start_address); + + writel(set_mode(ctlval, 1, SMODE_LOAD_REG), + ctl_reg); + writeb(0xda, start_address + ESDCTL_DDR2_MR); + writeb(0xda, start_address + ESDCTL_DDR2_OCD_DEFAULT); + + /* OCD mode exit */ + writeb(0xda, start_address + ESDCTL_DDR2_EN_DLL); /* Enable DLL */ + + /* Set normal mode */ + writel(set_mode(ctlval, 1, SMODE_NORMAL) | refresh, + ctl_reg); + + dram_wait(0x20000); + + /* Do not set delay lines, only for MDDR */ +} diff --git a/arch/arm/cpu/arm1136/start.S b/arch/arm/cpu/arm1136/start.S index 3752af9ddd..a067b8a186 100644 --- a/arch/arm/cpu/arm1136/start.S +++ b/arch/arm/cpu/arm1136/start.S @@ -100,6 +100,10 @@ _TEXT_BASE: _bss_start_ofs: .word __bss_start - _start +.global _image_copy_end_ofs +_image_copy_end_ofs: + .word __image_copy_end - _start + .globl _bss_end_ofs _bss_end_ofs: .word __bss_end__ - _start @@ -161,13 +165,7 @@ next: bl cpu_init_crit #endif -/* Set stackpointer in internal RAM to call board_init_f */ -call_board_init_f: - ldr sp, =(CONFIG_SYS_INIT_SP_ADDR) - bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ - ldr r0,=0x00000000 - - bl board_init_f + bl _main /*------------------------------------------------------------------------------*/ @@ -184,16 +182,12 @@ relocate_code: mov r5, r1 /* save addr of gd */ mov r6, r2 /* save addr of destination */ - /* Set up the stack */ -stack_setup: - mov sp, r4 - adr r0, _start cmp r0, r6 moveq r9, #0 /* no relocation. relocation offset(r9) = 0 */ - beq clear_bss /* skip relocation */ + beq relocate_done /* skip relocation */ mov r1, r6 /* r1 <- scratch for copy_loop */ - ldr r3, _bss_start_ofs + ldr r3, _image_copy_end_ofs add r2, r0, r3 /* r2 <- source end address */ copy_loop: @@ -241,50 +235,15 @@ fixnext: add r2, r2, #8 /* each rel.dyn entry is 8 bytes */ cmp r2, r3 blo fixloop + bx lr + #endif -clear_bss: -#ifndef CONFIG_SPL_BUILD - ldr r0, _bss_start_ofs - ldr r1, _bss_end_ofs - mov r4, r6 /* reloc addr */ - add r0, r0, r4 - add r1, r1, r4 - mov r2, #0x00000000 /* clear */ - -clbss_l:cmp r0, r1 /* clear loop... */ - bhs clbss_e /* if reached end of bss, exit */ - str r2, [r0] - add r0, r0, #4 - b clbss_l -clbss_e: -#endif /* #ifndef CONFIG_SPL_BUILD */ +relocate_done: -/* - * We are done. Do not return, instead branch to second part of board - * initialization, now running from RAM. - */ -#ifdef CONFIG_NAND_SPL - ldr r0, _nand_boot_ofs - mov pc, r0 + bx lr -_nand_boot_ofs: - .word nand_boot -#else -jump_2_ram: - ldr r0, _board_init_r_ofs - ldr r1, _TEXT_BASE - add lr, r0, r1 - add lr, lr, r9 - /* setup parameters for board_init_r */ - mov r0, r5 /* gd_t */ - mov r1, r6 /* dest_addr */ - /* jump to it ... */ - mov pc, lr - -_board_init_r_ofs: - .word board_init_r - _start -#endif +#ifndef CONFIG_SPL_BUILD _rel_dyn_start_ofs: .word __rel_dyn_start - _start @@ -293,6 +252,13 @@ _rel_dyn_end_ofs: _dynsym_start_ofs: .word __dynsym_start - _start +#endif + + .globl c_runtime_cpu_setup +c_runtime_cpu_setup: + + bx lr + /* ************************************************************************* * diff --git a/arch/arm/cpu/arm1136/u-boot-spl.lds b/arch/arm/cpu/arm1136/u-boot-spl.lds new file mode 100644 index 0000000000..a0462ab97a --- /dev/null +++ b/arch/arm/cpu/arm1136/u-boot-spl.lds @@ -0,0 +1,62 @@ +/* + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> + * + * (C) Copyright 2010 + * Texas Instruments, <www.ti.com> + * Aneesh V <aneesh@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +MEMORY { .sram : ORIGIN = CONFIG_SPL_TEXT_BASE,\ + LENGTH = CONFIG_SPL_MAX_SIZE } +MEMORY { .sdram : ORIGIN = CONFIG_SPL_BSS_START_ADDR, \ + LENGTH = CONFIG_SPL_BSS_MAX_SIZE } + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + .text : + { + __start = .; + arch/arm/cpu/arm1136/start.o (.text) + *(.text*) + } >.sram + + . = ALIGN(4); + .rodata : { *(SORT_BY_ALIGNMENT(.rodata*)) } >.sram + + . = ALIGN(4); + .data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram + . = ALIGN(4); + __image_copy_end = .; + _end = .; + + .bss : + { + . = ALIGN(4); + __bss_start = .; + *(.bss*) + . = ALIGN(4); + __bss_end__ = .; + } >.sdram +} diff --git a/arch/arm/cpu/arm1176/s3c64xx/Makefile b/arch/arm/cpu/arm1176/s3c64xx/Makefile index 0785b194c5..266a0739ce 100644 --- a/arch/arm/cpu/arm1176/s3c64xx/Makefile +++ b/arch/arm/cpu/arm1176/s3c64xx/Makefile @@ -31,7 +31,7 @@ LIB = $(obj)lib$(SOC).o SOBJS = reset.o COBJS-$(CONFIG_S3C6400) += cpu_init.o speed.o -COBJS-y += timer.o +COBJS-y += timer.o init.o OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS-y)) diff --git a/arch/arm/cpu/arm1176/s3c64xx/init.c b/arch/arm/cpu/arm1176/s3c64xx/init.c new file mode 100644 index 0000000000..f113d8ed41 --- /dev/null +++ b/arch/arm/cpu/arm1176/s3c64xx/init.c @@ -0,0 +1,26 @@ +/* + * (C) Copyright 2012 Ashok Kumar Reddy Kourla + * ashokkourla2000@gmail.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include<common.h> + +int arch_cpu_init(void) +{ + icache_enable(); + + return 0; +} diff --git a/arch/arm/cpu/arm1176/start.S b/arch/arm/cpu/arm1176/start.S index 667a0e0c48..40df4b1614 100644 --- a/arch/arm/cpu/arm1176/start.S +++ b/arch/arm/cpu/arm1176/start.S @@ -224,12 +224,7 @@ skip_tcmdisable: */ bl lowlevel_init /* go setup pll,mux,memory */ -/* Set stackpointer in internal RAM to call board_init_f */ -call_board_init_f: - ldr sp, =(CONFIG_SYS_INIT_SP_ADDR) - bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ - ldr r0,=0x00000000 - bl board_init_f + bl _main /*------------------------------------------------------------------------------*/ @@ -246,14 +241,10 @@ relocate_code: mov r5, r1 /* save addr of gd */ mov r6, r2 /* save addr of destination */ - /* Set up the stack */ -stack_setup: - mov sp, r4 - adr r0, _start cmp r0, r6 moveq r9, #0 /* no relocation. relocation offset(r9) = 0 */ - beq clear_bss /* skip relocation */ + beq relocate_done /* skip relocation */ mov r1, r6 /* r1 <- scratch for copy_loop */ ldr r3, _bss_start_ofs add r2, r0, r3 /* r2 <- source end address */ @@ -343,49 +334,9 @@ mmu_enable: skip_hw_init: #endif -clear_bss: -#ifndef CONFIG_SPL_BUILD - ldr r0, _bss_start_ofs - ldr r1, _bss_end_ofs - mov r4, r6 /* reloc addr */ - add r0, r0, r4 - add r1, r1, r4 - mov r2, #0x00000000 /* clear */ - -clbss_l:cmp r0, r1 /* clear loop... */ - bhs clbss_e /* if reached end of bss, exit */ - str r2, [r0] - add r0, r0, #4 - b clbss_l -clbss_e: -#ifndef CONFIG_NAND_SPL - bl coloured_LED_init - bl red_led_on -#endif -#endif +relocate_done: -/* - * We are done. Do not return, instead branch to second part of board - * initialization, now running from RAM. - */ -#ifdef CONFIG_NAND_SPL - ldr pc, _nand_boot - -_nand_boot: .word nand_boot -#else - ldr r0, _board_init_r_ofs - adr r1, _start - add lr, r0, r1 - add lr, lr, r9 - /* setup parameters for board_init_r */ - mov r0, r5 /* gd_t */ - mov r1, r6 /* dest_addr */ - /* jump to it ... */ - mov pc, lr - -_board_init_r_ofs: - .word board_init_r - _start -#endif + bx lr _rel_dyn_start_ofs: .word __rel_dyn_start - _start @@ -399,6 +350,11 @@ _mmu_table_base: .word mmu_table #endif + .globl c_runtime_cpu_setup +c_runtime_cpu_setup: + + mov pc, lr + #ifndef CONFIG_NAND_SPL /* * we assume that cache operation is done before. (eg. cleanup_before_linux()) diff --git a/arch/arm/cpu/arm720t/start.S b/arch/arm/cpu/arm720t/start.S index c2a7763fff..771d3869c1 100644 --- a/arch/arm/cpu/arm720t/start.S +++ b/arch/arm/cpu/arm720t/start.S @@ -147,12 +147,7 @@ reset: bl cpu_init_crit #endif -/* Set stackpointer in internal RAM to call board_init_f */ -call_board_init_f: - ldr sp, =(CONFIG_SYS_INIT_SP_ADDR) - bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ - ldr r0,=0x00000000 - bl board_init_f + bl _main /*------------------------------------------------------------------------------*/ @@ -169,14 +164,10 @@ relocate_code: mov r5, r1 /* save addr of gd */ mov r6, r2 /* save addr of destination */ - /* Set up the stack */ -stack_setup: - mov sp, r4 - adr r0, _start cmp r0, r6 moveq r9, #0 /* no relocation. relocation offset(r9) = 0 */ - beq clear_bss /* skip relocation */ + beq relocate_done /* skip relocation */ mov r1, r6 /* r1 <- scratch for copy_loop */ ldr r3, _bss_start_ofs add r2, r0, r3 /* r2 <- source end address */ @@ -228,43 +219,10 @@ fixnext: blo fixloop #endif -clear_bss: -#ifndef CONFIG_SPL_BUILD - ldr r0, _bss_start_ofs - ldr r1, _bss_end_ofs - mov r4, r6 /* reloc addr */ - add r0, r0, r4 - add r1, r1, r4 - mov r2, #0x00000000 /* clear */ - -clbss_l:cmp r0, r1 /* clear loop... */ - bhs clbss_e /* if reached end of bss, exit */ - str r2, [r0] - add r0, r0, #4 - b clbss_l -clbss_e: - - bl coloured_LED_init - bl red_led_on -#endif +relocate_done: -/* - * We are done. Do not return, instead branch to second part of board - * initialization, now running from RAM. - */ - ldr r0, _board_init_r_ofs - adr r1, _start - add lr, r0, r1 - add lr, lr, r9 - /* setup parameters for board_init_r */ - mov r0, r5 /* gd_t */ - mov r1, r6 /* dest_addr */ - /* jump to it ... */ mov pc, lr -_board_init_r_ofs: - .word board_init_r - _start - _rel_dyn_start_ofs: .word __rel_dyn_start - _start _rel_dyn_end_ofs: @@ -272,6 +230,11 @@ _rel_dyn_end_ofs: _dynsym_start_ofs: .word __dynsym_start - _start + .globl c_runtime_cpu_setup +c_runtime_cpu_setup: + + mov pc, lr + /* ************************************************************************* * diff --git a/arch/arm/cpu/arm920t/start.S b/arch/arm/cpu/arm920t/start.S index 14c9156c08..511d21d334 100644 --- a/arch/arm/cpu/arm920t/start.S +++ b/arch/arm/cpu/arm920t/start.S @@ -182,12 +182,7 @@ copyex: bl cpu_init_crit #endif -/* Set stackpointer in internal RAM to call board_init_f */ -call_board_init_f: - ldr sp, =(CONFIG_SYS_INIT_SP_ADDR) - bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ - ldr r0,=0x00000000 - bl board_init_f + bl _main /*------------------------------------------------------------------------------*/ @@ -204,14 +199,10 @@ relocate_code: mov r5, r1 /* save addr of gd */ mov r6, r2 /* save addr of destination */ - /* Set up the stack */ -stack_setup: - mov sp, r4 - adr r0, _start cmp r0, r6 moveq r9, #0 /* no relocation. relocation offset(r9) = 0 */ - beq clear_bss /* skip relocation */ + beq relocate_done /* skip relocation */ mov r1, r6 /* r1 <- scratch for copy_loop */ ldr r3, _bss_start_ofs add r2, r0, r3 /* r2 <- source end address */ @@ -263,51 +254,10 @@ fixnext: blo fixloop #endif -clear_bss: -#ifndef CONFIG_SPL_BUILD - ldr r0, _bss_start_ofs - ldr r1, _bss_end_ofs - mov r4, r6 /* reloc addr */ - add r0, r0, r4 - add r1, r1, r4 - mov r2, #0x00000000 /* clear */ - -clbss_l:cmp r0, r1 /* clear loop... */ - bhs clbss_e /* if reached end of bss, exit */ - str r2, [r0] - add r0, r0, #4 - b clbss_l -clbss_e: - - bl coloured_LED_init - bl red_led_on -#endif - -/* - * We are done. Do not return, instead branch to second part of board - * initialization, now running from RAM. - */ -#ifdef CONFIG_NAND_SPL - ldr r0, _nand_boot_ofs - mov pc, r0 +relocate_done: -_nand_boot_ofs: - .word nand_boot -#else - ldr r0, _board_init_r_ofs - adr r1, _start - add lr, r0, r1 - add lr, lr, r9 - /* setup parameters for board_init_r */ - mov r0, r5 /* gd_t */ - mov r1, r6 /* dest_addr */ - /* jump to it ... */ mov pc, lr -_board_init_r_ofs: - .word board_init_r - _start -#endif - _rel_dyn_start_ofs: .word __rel_dyn_start - _start _rel_dyn_end_ofs: @@ -315,6 +265,11 @@ _rel_dyn_end_ofs: _dynsym_start_ofs: .word __dynsym_start - _start + .globl c_runtime_cpu_setup +c_runtime_cpu_setup: + + mov pc, lr + /* ************************************************************************* * diff --git a/arch/arm/cpu/arm925t/start.S b/arch/arm/cpu/arm925t/start.S index 3a483f6cae..e8d6d71c17 100644 --- a/arch/arm/cpu/arm925t/start.S +++ b/arch/arm/cpu/arm925t/start.S @@ -34,10 +34,6 @@ #include <config.h> #include <version.h> -#if defined(CONFIG_OMAP1510) -#include <./configs/omap1510.h> -#endif - /* ************************************************************************* * @@ -176,12 +172,7 @@ poll1: bl cpu_init_crit #endif -/* Set stackpointer in internal RAM to call board_init_f */ -call_board_init_f: - ldr sp, =(CONFIG_SYS_INIT_SP_ADDR) - bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ - ldr r0,=0x00000000 - bl board_init_f + bl _main /*------------------------------------------------------------------------------*/ @@ -198,14 +189,10 @@ relocate_code: mov r5, r1 /* save addr of gd */ mov r6, r2 /* save addr of destination */ - /* Set up the stack */ -stack_setup: - mov sp, r4 - adr r0, _start cmp r0, r6 moveq r9, #0 /* no relocation. relocation offset(r9) = 0 */ - beq clear_bss /* skip relocation */ + beq relocate_done /* skip relocation */ mov r1, r6 /* r1 <- scratch for copy_loop */ ldr r3, _bss_start_ofs add r2, r0, r3 /* r2 <- source end address */ @@ -257,51 +244,10 @@ fixnext: blo fixloop #endif -clear_bss: -#ifndef CONFIG_SPL_BUILD - ldr r0, _bss_start_ofs - ldr r1, _bss_end_ofs - mov r4, r6 /* reloc addr */ - add r0, r0, r4 - add r1, r1, r4 - mov r2, #0x00000000 /* clear */ - -clbss_l:cmp r0, r1 /* clear loop... */ - bhs clbss_e /* if reached end of bss, exit */ - str r2, [r0] - add r0, r0, #4 - b clbss_l -clbss_e: - - bl coloured_LED_init - bl red_led_on -#endif - -/* - * We are done. Do not return, instead branch to second part of board - * initialization, now running from RAM. - */ -#ifdef CONFIG_NAND_SPL - ldr r0, _nand_boot_ofs - mov pc, r0 +relocate_done: -_nand_boot_ofs: - .word nand_boot -#else - ldr r0, _board_init_r_ofs - adr r1, _start - add lr, r0, r1 - add lr, lr, r9 - /* setup parameters for board_init_r */ - mov r0, r5 /* gd_t */ - mov r1, r6 /* dest_addr */ - /* jump to it ... */ mov pc, lr -_board_init_r_ofs: - .word board_init_r - _start -#endif - _rel_dyn_start_ofs: .word __rel_dyn_start - _start _rel_dyn_end_ofs: @@ -309,6 +255,11 @@ _rel_dyn_end_ofs: _dynsym_start_ofs: .word __dynsym_start - _start + .globl c_runtime_cpu_setup +c_runtime_cpu_setup: + + mov pc, lr + /* ************************************************************************* * diff --git a/arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c b/arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c index 93485523b5..0448c0b133 100644 --- a/arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c +++ b/arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c @@ -193,6 +193,19 @@ void at91_spi1_hw_init(unsigned long cs_mask) } #endif +#if defined(CONFIG_USB_OHCI_NEW) || defined(CONFIG_USB_EHCI) +void at91_uhp_hw_init(void) +{ + /* Enable VBus on UHP ports */ + at91_set_pio_output(AT91_PIO_PORTD, 18, 0); /* port A */ + at91_set_pio_output(AT91_PIO_PORTD, 19, 0); /* port B */ +#if defined(CONFIG_USB_OHCI_NEW) + /* port C is OHCI only */ + at91_set_pio_output(AT91_PIO_PORTD, 20, 0); /* port C */ +#endif +} +#endif + #ifdef CONFIG_MACB void at91_macb_hw_init(void) { diff --git a/arch/arm/cpu/arm926ejs/davinci/reset.c b/arch/arm/cpu/arm926ejs/davinci/reset.c index 968fb035c8..80f1ce9d31 100644 --- a/arch/arm/cpu/arm926ejs/davinci/reset.c +++ b/arch/arm/cpu/arm926ejs/davinci/reset.c @@ -16,7 +16,7 @@ void reset_cpu(unsigned long a) { struct davinci_timer *const wdttimer = - (struct davinci_timer *)DAVINCI_TIMER1_BASE; + (struct davinci_timer *)DAVINCI_WDOG_BASE; writel(0x08, &wdttimer->tgcr); writel(readl(&wdttimer->tgcr) | 0x03, &wdttimer->tgcr); writel(0, &wdttimer->tim12); diff --git a/arch/arm/cpu/arm926ejs/kirkwood/mpp.c b/arch/arm/cpu/arm926ejs/kirkwood/mpp.c index 03eb2de520..0ba6f098cb 100644 --- a/arch/arm/cpu/arm926ejs/kirkwood/mpp.c +++ b/arch/arm/cpu/arm926ejs/kirkwood/mpp.c @@ -31,7 +31,7 @@ static u32 kirkwood_variant(void) #define MPP_CTRL(i) (KW_MPP_BASE + (i* 4)) #define MPP_NR_REGS (1 + MPP_MAX/8) -void kirkwood_mpp_conf(u32 *mpp_list, u32 *mpp_save) +void kirkwood_mpp_conf(const u32 *mpp_list, u32 *mpp_save) { u32 mpp_ctrl[MPP_NR_REGS]; unsigned int variant_mask; diff --git a/arch/arm/cpu/arm926ejs/mxs/spl_boot.c b/arch/arm/cpu/arm926ejs/mxs/spl_boot.c index 8ea7c36f46..1b8502eb9d 100644 --- a/arch/arm/cpu/arm926ejs/mxs/spl_boot.c +++ b/arch/arm/cpu/arm926ejs/mxs/spl_boot.c @@ -50,7 +50,7 @@ void early_delay(int delay) } #define MUX_CONFIG_BOOTMODE_PAD (MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_NOPULL) -const iomux_cfg_t iomux_boot[] = { +static const iomux_cfg_t iomux_boot[] = { MX28_PAD_LCD_D00__GPIO_1_0 | MUX_CONFIG_BOOTMODE_PAD, MX28_PAD_LCD_D01__GPIO_1_1 | MUX_CONFIG_BOOTMODE_PAD, MX28_PAD_LCD_D02__GPIO_1_2 | MUX_CONFIG_BOOTMODE_PAD, @@ -59,7 +59,7 @@ const iomux_cfg_t iomux_boot[] = { MX28_PAD_LCD_D05__GPIO_1_5 | MUX_CONFIG_BOOTMODE_PAD, }; -uint8_t mxs_get_bootmode_index(void) +static uint8_t mxs_get_bootmode_index(void) { uint8_t bootmode = 0; int i; diff --git a/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c b/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c index e693145b90..401c51362b 100644 --- a/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c +++ b/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c @@ -30,7 +30,11 @@ #include "mxs_init.h" -static uint32_t mx28_dram_vals[] = { +static uint32_t dram_vals[] = { +/* + * i.MX28 DDR2 at 200MHz + */ +#if defined(CONFIG_MX28) 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, @@ -79,6 +83,9 @@ static uint32_t mx28_dram_vals[] = { 0x06120612, 0x04320432, 0x04320432, 0x00040004, 0x00040004, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00010001 +#else +#error Unsupported memory initialization +#endif }; void __mxs_adjust_memory_params(uint32_t *dram_vals) @@ -87,17 +94,17 @@ void __mxs_adjust_memory_params(uint32_t *dram_vals) void mxs_adjust_memory_params(uint32_t *dram_vals) __attribute__((weak, alias("__mxs_adjust_memory_params"))); -void init_mx28_200mhz_ddr2(void) +static void initialize_dram_values(void) { int i; - mxs_adjust_memory_params(mx28_dram_vals); + mxs_adjust_memory_params(dram_vals); - for (i = 0; i < ARRAY_SIZE(mx28_dram_vals); i++) - writel(mx28_dram_vals[i], MXS_DRAM_BASE + (4 * i)); + for (i = 0; i < ARRAY_SIZE(dram_vals); i++) + writel(dram_vals[i], MXS_DRAM_BASE + (4 * i)); } -void mxs_mem_init_clock(void) +static void mxs_mem_init_clock(void) { struct mxs_clkctrl_regs *clkctrl_regs = (struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE; @@ -128,7 +135,7 @@ void mxs_mem_init_clock(void) early_delay(10000); } -void mxs_mem_setup_cpu_and_hbus(void) +static void mxs_mem_setup_cpu_and_hbus(void) { struct mxs_clkctrl_regs *clkctrl_regs = (struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE; @@ -160,7 +167,7 @@ void mxs_mem_setup_cpu_and_hbus(void) early_delay(15000); } -void mxs_mem_setup_vdda(void) +static void mxs_mem_setup_vdda(void) { struct mxs_power_regs *power_regs = (struct mxs_power_regs *)MXS_POWER_BASE; @@ -171,17 +178,6 @@ void mxs_mem_setup_vdda(void) &power_regs->hw_power_vddactrl); } -void mxs_mem_setup_vddd(void) -{ - struct mxs_power_regs *power_regs = - (struct mxs_power_regs *)MXS_POWER_BASE; - - writel((0x1c << POWER_VDDDCTRL_TRG_OFFSET) | - (0x7 << POWER_VDDDCTRL_BO_OFFSET_OFFSET) | - POWER_VDDDCTRL_LINREG_OFFSET_1STEPS_BELOW, - &power_regs->hw_power_vdddctrl); -} - uint32_t mxs_mem_get_size(void) { uint32_t sz, da; @@ -229,7 +225,7 @@ void mxs_mem_init(void) /* Clear START bit from DRAM_CTL16 */ clrbits_le32(MXS_DRAM_BASE + 0x40, 1); - init_mx28_200mhz_ddr2(); + initialize_dram_values(); /* Clear SREFRESH bit from DRAM_CTL17 */ clrbits_le32(MXS_DRAM_BASE + 0x44, 1); @@ -241,8 +237,6 @@ void mxs_mem_init(void) while (!(readl(MXS_DRAM_BASE + 0xe8) & (1 << 20))) ; - mxs_mem_setup_vddd(); - early_delay(10000); mxs_mem_setup_cpu_and_hbus(); diff --git a/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c b/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c index 4b917bd186..be44c22976 100644 --- a/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c +++ b/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c @@ -30,7 +30,7 @@ #include "mxs_init.h" -void mxs_power_clock2xtal(void) +static void mxs_power_clock2xtal(void) { struct mxs_clkctrl_regs *clkctrl_regs = (struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE; @@ -40,7 +40,7 @@ void mxs_power_clock2xtal(void) &clkctrl_regs->hw_clkctrl_clkseq_set); } -void mxs_power_clock2pll(void) +static void mxs_power_clock2pll(void) { struct mxs_clkctrl_regs *clkctrl_regs = (struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE; @@ -52,7 +52,7 @@ void mxs_power_clock2pll(void) CLKCTRL_CLKSEQ_BYPASS_CPU); } -void mxs_power_clear_auto_restart(void) +static void mxs_power_clear_auto_restart(void) { struct mxs_rtc_regs *rtc_regs = (struct mxs_rtc_regs *)MXS_RTC_BASE; @@ -85,7 +85,7 @@ void mxs_power_clear_auto_restart(void) ; } -void mxs_power_set_linreg(void) +static void mxs_power_set_linreg(void) { struct mxs_power_regs *power_regs = (struct mxs_power_regs *)MXS_POWER_BASE; @@ -104,7 +104,7 @@ void mxs_power_set_linreg(void) POWER_VDDIOCTRL_LINREG_OFFSET_1STEPS_BELOW); } -int mxs_get_batt_volt(void) +static int mxs_get_batt_volt(void) { struct mxs_power_regs *power_regs = (struct mxs_power_regs *)MXS_POWER_BASE; @@ -115,12 +115,12 @@ int mxs_get_batt_volt(void) return volt; } -int mxs_is_batt_ready(void) +static int mxs_is_batt_ready(void) { return (mxs_get_batt_volt() >= 3600); } -int mxs_is_batt_good(void) +static int mxs_is_batt_good(void) { struct mxs_power_regs *power_regs = (struct mxs_power_regs *)MXS_POWER_BASE; @@ -160,7 +160,7 @@ int mxs_is_batt_good(void) return 0; } -void mxs_power_setup_5v_detect(void) +static void mxs_power_setup_5v_detect(void) { struct mxs_power_regs *power_regs = (struct mxs_power_regs *)MXS_POWER_BASE; @@ -172,7 +172,7 @@ void mxs_power_setup_5v_detect(void) POWER_5VCTRL_PWRUP_VBUS_CMPS); } -void mxs_src_power_init(void) +static void mxs_src_power_init(void) { struct mxs_power_regs *power_regs = (struct mxs_power_regs *)MXS_POWER_BASE; @@ -203,7 +203,7 @@ void mxs_src_power_init(void) clrbits_le32(&power_regs->hw_power_5vctrl, POWER_5VCTRL_DCDC_XFER); } -void mxs_power_init_4p2_params(void) +static void mxs_power_init_4p2_params(void) { struct mxs_power_regs *power_regs = (struct mxs_power_regs *)MXS_POWER_BASE; @@ -227,7 +227,7 @@ void mxs_power_init_4p2_params(void) 0x3f << POWER_5VCTRL_CHARGE_4P2_ILIMIT_OFFSET); } -void mxs_enable_4p2_dcdc_input(int xfer) +static void mxs_enable_4p2_dcdc_input(int xfer) { struct mxs_power_regs *power_regs = (struct mxs_power_regs *)MXS_POWER_BASE; @@ -323,7 +323,7 @@ void mxs_enable_4p2_dcdc_input(int xfer) POWER_CTRL_ENIRQ_VDD5V_DROOP); } -void mxs_power_init_4p2_regulator(void) +static void mxs_power_init_4p2_regulator(void) { struct mxs_power_regs *power_regs = (struct mxs_power_regs *)MXS_POWER_BASE; @@ -407,7 +407,7 @@ void mxs_power_init_4p2_regulator(void) writel(POWER_CTRL_DCDC4P2_BO_IRQ, &power_regs->hw_power_ctrl_clr); } -void mxs_power_init_dcdc_4p2_source(void) +static void mxs_power_init_dcdc_4p2_source(void) { struct mxs_power_regs *power_regs = (struct mxs_power_regs *)MXS_POWER_BASE; @@ -429,7 +429,7 @@ void mxs_power_init_dcdc_4p2_source(void) } } -void mxs_power_enable_4p2(void) +static void mxs_power_enable_4p2(void) { struct mxs_power_regs *power_regs = (struct mxs_power_regs *)MXS_POWER_BASE; @@ -488,7 +488,7 @@ void mxs_power_enable_4p2(void) &power_regs->hw_power_charge_clr); } -void mxs_boot_valid_5v(void) +static void mxs_boot_valid_5v(void) { struct mxs_power_regs *power_regs = (struct mxs_power_regs *)MXS_POWER_BASE; @@ -511,7 +511,7 @@ void mxs_boot_valid_5v(void) mxs_power_enable_4p2(); } -void mxs_powerdown(void) +static void mxs_powerdown(void) { struct mxs_power_regs *power_regs = (struct mxs_power_regs *)MXS_POWER_BASE; @@ -520,7 +520,7 @@ void mxs_powerdown(void) &power_regs->hw_power_reset); } -void mxs_batt_boot(void) +static void mxs_batt_boot(void) { struct mxs_power_regs *power_regs = (struct mxs_power_regs *)MXS_POWER_BASE; @@ -564,7 +564,7 @@ void mxs_batt_boot(void) 0x8 << POWER_5VCTRL_CHARGE_4P2_ILIMIT_OFFSET); } -void mxs_handle_5v_conflict(void) +static void mxs_handle_5v_conflict(void) { struct mxs_power_regs *power_regs = (struct mxs_power_regs *)MXS_POWER_BASE; @@ -600,7 +600,7 @@ void mxs_handle_5v_conflict(void) } } -void mxs_5v_boot(void) +static void mxs_5v_boot(void) { struct mxs_power_regs *power_regs = (struct mxs_power_regs *)MXS_POWER_BASE; @@ -623,7 +623,7 @@ void mxs_5v_boot(void) mxs_handle_5v_conflict(); } -void mxs_init_batt_bo(void) +static void mxs_init_batt_bo(void) { struct mxs_power_regs *power_regs = (struct mxs_power_regs *)MXS_POWER_BASE; @@ -637,7 +637,7 @@ void mxs_init_batt_bo(void) writel(POWER_CTRL_ENIRQ_BATT_BO, &power_regs->hw_power_ctrl_clr); } -void mxs_switch_vddd_to_dcdc_source(void) +static void mxs_switch_vddd_to_dcdc_source(void) { struct mxs_power_regs *power_regs = (struct mxs_power_regs *)MXS_POWER_BASE; @@ -651,7 +651,7 @@ void mxs_switch_vddd_to_dcdc_source(void) POWER_VDDDCTRL_DISABLE_STEPPING); } -void mxs_power_configure_power_source(void) +static void mxs_power_configure_power_source(void) { int batt_ready, batt_good; struct mxs_power_regs *power_regs = @@ -689,7 +689,7 @@ void mxs_power_configure_power_source(void) mxs_switch_vddd_to_dcdc_source(); } -void mxs_enable_output_rail_protection(void) +static void mxs_enable_output_rail_protection(void) { struct mxs_power_regs *power_regs = (struct mxs_power_regs *)MXS_POWER_BASE; @@ -707,7 +707,7 @@ void mxs_enable_output_rail_protection(void) POWER_VDDIOCTRL_PWDN_BRNOUT); } -int mxs_get_vddio_power_source_off(void) +static int mxs_get_vddio_power_source_off(void) { struct mxs_power_regs *power_regs = (struct mxs_power_regs *)MXS_POWER_BASE; @@ -735,7 +735,7 @@ int mxs_get_vddio_power_source_off(void) } -int mxs_get_vddd_power_source_off(void) +static int mxs_get_vddd_power_source_off(void) { struct mxs_power_regs *power_regs = (struct mxs_power_regs *)MXS_POWER_BASE; @@ -766,201 +766,115 @@ int mxs_get_vddd_power_source_off(void) return 0; } -void mxs_power_set_vddio(uint32_t new_target, uint32_t new_brownout) +struct mxs_vddx_cfg { + uint32_t *reg; + uint8_t step_mV; + uint16_t lowest_mV; + int (*powered_by_linreg)(void); + uint32_t trg_mask; + uint32_t bo_irq; + uint32_t bo_enirq; + uint32_t bo_offset_mask; + uint32_t bo_offset_offset; +}; + +static const struct mxs_vddx_cfg mxs_vddio_cfg = { + .reg = &(((struct mxs_power_regs *)MXS_POWER_BASE)-> + hw_power_vddioctrl), + .step_mV = 50, + .lowest_mV = 2800, + .powered_by_linreg = mxs_get_vddio_power_source_off, + .trg_mask = POWER_VDDIOCTRL_TRG_MASK, + .bo_irq = POWER_CTRL_VDDIO_BO_IRQ, + .bo_enirq = POWER_CTRL_ENIRQ_VDDIO_BO, + .bo_offset_mask = POWER_VDDIOCTRL_BO_OFFSET_MASK, + .bo_offset_offset = POWER_VDDIOCTRL_BO_OFFSET_OFFSET, +}; + +static const struct mxs_vddx_cfg mxs_vddd_cfg = { + .reg = &(((struct mxs_power_regs *)MXS_POWER_BASE)-> + hw_power_vdddctrl), + .step_mV = 25, + .lowest_mV = 800, + .powered_by_linreg = mxs_get_vddd_power_source_off, + .trg_mask = POWER_VDDDCTRL_TRG_MASK, + .bo_irq = POWER_CTRL_VDDD_BO_IRQ, + .bo_enirq = POWER_CTRL_ENIRQ_VDDD_BO, + .bo_offset_mask = POWER_VDDDCTRL_BO_OFFSET_MASK, + .bo_offset_offset = POWER_VDDDCTRL_BO_OFFSET_OFFSET, +}; + +static void mxs_power_set_vddx(const struct mxs_vddx_cfg *cfg, + uint32_t new_target, uint32_t new_brownout) { struct mxs_power_regs *power_regs = (struct mxs_power_regs *)MXS_POWER_BASE; uint32_t cur_target, diff, bo_int = 0; uint32_t powered_by_linreg = 0; + int adjust_up, tmp; - new_brownout = (new_target - new_brownout + 25) / 50; + new_brownout = DIV_ROUND(new_target - new_brownout, cfg->step_mV); - cur_target = readl(&power_regs->hw_power_vddioctrl); - cur_target &= POWER_VDDIOCTRL_TRG_MASK; - cur_target *= 50; /* 50 mV step*/ - cur_target += 2800; /* 2800 mV lowest */ + cur_target = readl(cfg->reg); + cur_target &= cfg->trg_mask; + cur_target *= cfg->step_mV; + cur_target += cfg->lowest_mV; - powered_by_linreg = mxs_get_vddio_power_source_off(); - if (new_target > cur_target) { + adjust_up = new_target > cur_target; + powered_by_linreg = cfg->powered_by_linreg(); + if (adjust_up) { if (powered_by_linreg) { - bo_int = readl(&power_regs->hw_power_vddioctrl); - clrbits_le32(&power_regs->hw_power_vddioctrl, - POWER_CTRL_ENIRQ_VDDIO_BO); + bo_int = readl(cfg->reg); + clrbits_le32(cfg->reg, cfg->bo_enirq); } + setbits_le32(cfg->reg, cfg->bo_offset_mask); + } - setbits_le32(&power_regs->hw_power_vddioctrl, - POWER_VDDIOCTRL_BO_OFFSET_MASK); - do { - if (new_target - cur_target > 100) + do { + if (abs(new_target - cur_target) > 100) { + if (adjust_up) diff = cur_target + 100; else - diff = new_target; - - diff -= 2800; - diff /= 50; - - clrsetbits_le32(&power_regs->hw_power_vddioctrl, - POWER_VDDIOCTRL_TRG_MASK, diff); - - if (powered_by_linreg || - (readl(&power_regs->hw_power_sts) & - POWER_STS_VDD5V_GT_VDDIO)) - early_delay(500); - else { - while (!(readl(&power_regs->hw_power_sts) & - POWER_STS_DC_OK)) - ; - - } - - cur_target = readl(&power_regs->hw_power_vddioctrl); - cur_target &= POWER_VDDIOCTRL_TRG_MASK; - cur_target *= 50; /* 50 mV step*/ - cur_target += 2800; /* 2800 mV lowest */ - } while (new_target > cur_target); - - if (powered_by_linreg) { - writel(POWER_CTRL_VDDIO_BO_IRQ, - &power_regs->hw_power_ctrl_clr); - if (bo_int & POWER_CTRL_ENIRQ_VDDIO_BO) - setbits_le32(&power_regs->hw_power_vddioctrl, - POWER_CTRL_ENIRQ_VDDIO_BO); - } - } else { - do { - if (cur_target - new_target > 100) diff = cur_target - 100; - else - diff = new_target; - - diff -= 2800; - diff /= 50; - - clrsetbits_le32(&power_regs->hw_power_vddioctrl, - POWER_VDDIOCTRL_TRG_MASK, diff); - - if (powered_by_linreg || - (readl(&power_regs->hw_power_sts) & - POWER_STS_VDD5V_GT_VDDIO)) - early_delay(500); - else { - while (!(readl(&power_regs->hw_power_sts) & - POWER_STS_DC_OK)) - ; - - } - - cur_target = readl(&power_regs->hw_power_vddioctrl); - cur_target &= POWER_VDDIOCTRL_TRG_MASK; - cur_target *= 50; /* 50 mV step*/ - cur_target += 2800; /* 2800 mV lowest */ - } while (new_target < cur_target); - } - - clrsetbits_le32(&power_regs->hw_power_vddioctrl, - POWER_VDDIOCTRL_BO_OFFSET_MASK, - new_brownout << POWER_VDDIOCTRL_BO_OFFSET_OFFSET); -} - -void mxs_power_set_vddd(uint32_t new_target, uint32_t new_brownout) -{ - struct mxs_power_regs *power_regs = - (struct mxs_power_regs *)MXS_POWER_BASE; - uint32_t cur_target, diff, bo_int = 0; - uint32_t powered_by_linreg = 0; - - new_brownout = (new_target - new_brownout + 12) / 25; - - cur_target = readl(&power_regs->hw_power_vdddctrl); - cur_target &= POWER_VDDDCTRL_TRG_MASK; - cur_target *= 25; /* 25 mV step*/ - cur_target += 800; /* 800 mV lowest */ - - powered_by_linreg = mxs_get_vddd_power_source_off(); - if (new_target > cur_target) { - if (powered_by_linreg) { - bo_int = readl(&power_regs->hw_power_vdddctrl); - clrbits_le32(&power_regs->hw_power_vdddctrl, - POWER_CTRL_ENIRQ_VDDD_BO); + } else { + diff = new_target; } - setbits_le32(&power_regs->hw_power_vdddctrl, - POWER_VDDDCTRL_BO_OFFSET_MASK); - - do { - if (new_target - cur_target > 100) - diff = cur_target + 100; - else - diff = new_target; - - diff -= 800; - diff /= 25; - - clrsetbits_le32(&power_regs->hw_power_vdddctrl, - POWER_VDDDCTRL_TRG_MASK, diff); + diff -= cfg->lowest_mV; + diff /= cfg->step_mV; - if (powered_by_linreg || - (readl(&power_regs->hw_power_sts) & - POWER_STS_VDD5V_GT_VDDIO)) - early_delay(500); - else { - while (!(readl(&power_regs->hw_power_sts) & - POWER_STS_DC_OK)) - ; + clrsetbits_le32(cfg->reg, cfg->trg_mask, diff); + if (powered_by_linreg || + (readl(&power_regs->hw_power_sts) & + POWER_STS_VDD5V_GT_VDDIO)) + early_delay(500); + else { + for (;;) { + tmp = readl(&power_regs->hw_power_sts); + if (tmp & POWER_STS_DC_OK) + break; } - - cur_target = readl(&power_regs->hw_power_vdddctrl); - cur_target &= POWER_VDDDCTRL_TRG_MASK; - cur_target *= 25; /* 25 mV step*/ - cur_target += 800; /* 800 mV lowest */ - } while (new_target > cur_target); - - if (powered_by_linreg) { - writel(POWER_CTRL_VDDD_BO_IRQ, - &power_regs->hw_power_ctrl_clr); - if (bo_int & POWER_CTRL_ENIRQ_VDDD_BO) - setbits_le32(&power_regs->hw_power_vdddctrl, - POWER_CTRL_ENIRQ_VDDD_BO); } - } else { - do { - if (cur_target - new_target > 100) - diff = cur_target - 100; - else - diff = new_target; - diff -= 800; - diff /= 25; + cur_target = readl(cfg->reg); + cur_target &= cfg->trg_mask; + cur_target *= cfg->step_mV; + cur_target += cfg->lowest_mV; + } while (new_target > cur_target); - clrsetbits_le32(&power_regs->hw_power_vdddctrl, - POWER_VDDDCTRL_TRG_MASK, diff); - - if (powered_by_linreg || - (readl(&power_regs->hw_power_sts) & - POWER_STS_VDD5V_GT_VDDIO)) - early_delay(500); - else { - while (!(readl(&power_regs->hw_power_sts) & - POWER_STS_DC_OK)) - ; - - } - - cur_target = readl(&power_regs->hw_power_vdddctrl); - cur_target &= POWER_VDDDCTRL_TRG_MASK; - cur_target *= 25; /* 25 mV step*/ - cur_target += 800; /* 800 mV lowest */ - } while (new_target < cur_target); + if (adjust_up && powered_by_linreg) { + writel(cfg->bo_irq, &power_regs->hw_power_ctrl_clr); + if (bo_int & cfg->bo_enirq) + setbits_le32(cfg->reg, cfg->bo_enirq); } - clrsetbits_le32(&power_regs->hw_power_vdddctrl, - POWER_VDDDCTRL_BO_OFFSET_MASK, - new_brownout << POWER_VDDDCTRL_BO_OFFSET_OFFSET); + clrsetbits_le32(cfg->reg, cfg->bo_offset_mask, + new_brownout << cfg->bo_offset_offset); } -void mxs_setup_batt_detect(void) +static void mxs_setup_batt_detect(void) { mxs_lradc_init(); mxs_lradc_enable_batt_measurement(); @@ -982,9 +896,8 @@ void mxs_power_init(void) mxs_power_configure_power_source(); mxs_enable_output_rail_protection(); - mxs_power_set_vddio(3300, 3150); - - mxs_power_set_vddd(1350, 1200); + mxs_power_set_vddx(&mxs_vddio_cfg, 3300, 3150); + mxs_power_set_vddx(&mxs_vddd_cfg, 1500, 1000); writel(POWER_CTRL_VDDD_BO_IRQ | POWER_CTRL_VDDA_BO_IRQ | POWER_CTRL_VDDIO_BO_IRQ | POWER_CTRL_VDD5V_DROOP_IRQ | diff --git a/arch/arm/cpu/arm926ejs/start.S b/arch/arm/cpu/arm926ejs/start.S index 2188f7e35d..66a8b654bd 100644 --- a/arch/arm/cpu/arm926ejs/start.S +++ b/arch/arm/cpu/arm926ejs/start.S @@ -36,12 +36,6 @@ #include <common.h> #include <version.h> -#if defined(CONFIG_OMAP1610) -#include <./configs/omap1510.h> -#elif defined(CONFIG_OMAP730) -#include <./configs/omap730.h> -#endif - /* ************************************************************************* * @@ -198,20 +192,7 @@ reset: bl cpu_init_crit #endif -/* Set stackpointer in internal RAM to call board_init_f */ -call_board_init_f: -#ifdef CONFIG_NAND_SPL /* deprecated, use instead CONFIG_SPL_BUILD */ - ldr sp, =(CONFIG_SYS_INIT_SP_ADDR) -#else -#ifdef CONFIG_SPL_BUILD - ldr sp, =(CONFIG_SPL_STACK) -#else - ldr sp, =(CONFIG_SYS_INIT_SP_ADDR) -#endif -#endif - bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ - ldr r0,=0x00000000 - bl board_init_f + bl _main /*------------------------------------------------------------------------------*/ @@ -229,15 +210,11 @@ relocate_code: mov r5, r1 /* save addr of gd */ mov r6, r2 /* save addr of destination */ - /* Set up the stack */ -stack_setup: - mov sp, r4 - adr r0, _start sub r9, r6, r0 /* r9 <- relocation offset */ cmp r0, r6 - moveq r9, #0 /* no relocation. relocation offset(r9) = 0 */ - beq clear_bss /* skip relocation */ + moveq r9, #0 /* no relocation. offset(r9) = 0 */ + beq relocate_done /* skip relocation */ mov r1, r6 /* r1 <- scratch for copy loop */ ldr r3, _bss_start_ofs add r2, r0, r3 /* r2 <- source end address */ @@ -289,56 +266,9 @@ fixnext: blo fixloop #endif -clear_bss: -#ifdef CONFIG_SPL_BUILD - /* No relocation for SPL */ - ldr r0, =__bss_start - ldr r1, =__bss_end__ -#else - ldr r0, _bss_start_ofs - ldr r1, _bss_end_ofs - mov r4, r6 /* reloc addr */ - add r0, r0, r4 - add r1, r1, r4 -#endif - mov r2, #0x00000000 /* clear */ - -clbss_l:cmp r0, r1 /* clear loop... */ - bhs clbss_e /* if reached end of bss, exit */ - str r2, [r0] - add r0, r0, #4 - b clbss_l -clbss_e: - -#ifndef CONFIG_SPL_BUILD - bl coloured_LED_init - bl red_led_on -#endif - -/* - * We are done. Do not return, instead branch to second part of board - * initialization, now running from RAM. - */ -#ifdef CONFIG_NAND_SPL - ldr r0, _nand_boot_ofs - mov pc, r0 +relocate_done: -_nand_boot_ofs: - .word nand_boot -#else - ldr r0, _board_init_r_ofs - ldr r1, _TEXT_BASE - add lr, r0, r1 - add lr, lr, r9 - /* setup parameters for board_init_r */ - mov r0, r5 /* gd_t */ - mov r1, r6 /* dest_addr */ - /* jump to it ... */ - mov pc, lr - -_board_init_r_ofs: - .word board_init_r - _start -#endif + bx lr _rel_dyn_start_ofs: .word __rel_dyn_start - _start @@ -346,8 +276,14 @@ _rel_dyn_end_ofs: .word __rel_dyn_end - _start _dynsym_start_ofs: .word __dynsym_start - _start + #endif + .globl c_runtime_cpu_setup +c_runtime_cpu_setup: + + bx lr + /* ************************************************************************* * diff --git a/arch/arm/cpu/arm946es/start.S b/arch/arm/cpu/arm946es/start.S index 30e21835cc..a7a98a4e58 100644 --- a/arch/arm/cpu/arm946es/start.S +++ b/arch/arm/cpu/arm946es/start.S @@ -147,12 +147,7 @@ reset: bl cpu_init_crit #endif -/* Set stackpointer in internal RAM to call board_init_f */ -call_board_init_f: - ldr sp, =(CONFIG_SYS_INIT_SP_ADDR) - bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ - ldr r0,=0x00000000 - bl board_init_f + bl _main /*------------------------------------------------------------------------------*/ @@ -169,14 +164,10 @@ relocate_code: mov r5, r1 /* save addr of gd */ mov r6, r2 /* save addr of destination */ - /* Set up the stack */ -stack_setup: - mov sp, r4 - adr r0, _start cmp r0, r6 moveq r9, #0 /* no relocation. relocation offset(r9) = 0 */ - beq clear_bss /* skip relocation */ + beq relocate_done /* skip relocation */ mov r1, r6 /* r1 <- scratch for copy_loop */ ldr r3, _bss_start_ofs add r2, r0, r3 /* r2 <- source end address */ @@ -228,46 +219,10 @@ fixnext: blo fixloop #endif -clear_bss: -#ifndef CONFIG_SPL_BUILD - ldr r0, _bss_start_ofs - ldr r1, _bss_end_ofs - mov r4, r6 /* reloc addr */ - add r0, r0, r4 - add r1, r1, r4 - mov r2, #0x00000000 /* clear */ - -clbss_l:cmp r0, r1 /* clear loop... */ - bhs clbss_e /* if reached end of bss, exit */ - str r2, [r0] - add r0, r0, #4 - b clbss_l -clbss_e: -#endif - -/* - * We are done. Do not return, instead branch to second part of board - * initialization, now running from RAM. - */ -#ifdef CONFIG_NAND_SPL - ldr pc, _nand_boot +relocate_done: -_nand_boot: .word nand_boot -#else - ldr r0, _board_init_r_ofs - adr r1, _start - add lr, r0, r1 - add lr, lr, r9 - /* setup parameters for board_init_r */ - mov r0, r5 /* gd_t */ - mov r1, r6 /* dest_addr */ - /* jump to it ... */ mov pc, lr -_board_init_r_ofs: - .word board_init_r - _start -#endif - _rel_dyn_start_ofs: .word __rel_dyn_start - _start _rel_dyn_end_ofs: @@ -275,6 +230,11 @@ _rel_dyn_end_ofs: _dynsym_start_ofs: .word __dynsym_start - _start + .globl c_runtime_cpu_setup +c_runtime_cpu_setup: + + mov pc, lr + /* ************************************************************************* * diff --git a/arch/arm/cpu/arm_intcm/start.S b/arch/arm/cpu/arm_intcm/start.S index a133d19bc8..c189849fa8 100644 --- a/arch/arm/cpu/arm_intcm/start.S +++ b/arch/arm/cpu/arm_intcm/start.S @@ -143,12 +143,7 @@ reset: bl cpu_init_crit #endif -/* Set stackpointer in internal RAM to call board_init_f */ -call_board_init_f: - ldr sp, =(CONFIG_SYS_INIT_SP_ADDR) - bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ - ldr r0,=0x00000000 - bl board_init_f + bl _main /*------------------------------------------------------------------------------*/ @@ -165,14 +160,10 @@ relocate_code: mov r5, r1 /* save addr of gd */ mov r6, r2 /* save addr of destination */ - /* Set up the stack */ -stack_setup: - mov sp, r4 - adr r0, _start cmp r0, r6 moveq r9, #0 /* no relocation. relocation offset(r9) = 0 */ - beq clear_bss /* skip relocation */ + beq relocate_done /* skip relocation */ mov r1, r6 /* r1 <- scratch for copy_loop */ ldr r3, _bss_start_ofs add r2, r0, r3 /* r2 <- source end address */ @@ -224,50 +215,9 @@ fixnext: blo fixloop #endif -clear_bss: -#ifndef CONFIG_SPL_BUILD - ldr r0, _bss_start_ofs - ldr r1, _bss_end_ofs - mov r4, r6 /* reloc addr */ - add r0, r0, r4 - add r1, r1, r4 - mov r2, #0x00000000 /* clear */ - -clbss_l:cmp r0, r1 /* clear loop... */ - bhs clbss_e /* if reached end of bss, exit */ - str r2, [r0] - add r0, r0, #4 - b clbss_l -clbss_e: - - bl coloured_LED_init - bl red_led_on -#endif +relocate_done: -/* - * We are done. Do not return, instead branch to second part of board - * initialization, now running from RAM. - */ -#ifdef CONFIG_NAND_SPL - ldr r0, _nand_boot_ofs - mov pc, r0 - -_nand_boot_ofs: - .word nand_boot -#else - ldr r0, _board_init_r_ofs - adr r1, _start - add lr, r0, r1 - add lr, lr, r9 - /* setup parameters for board_init_r */ - mov r0, r5 /* gd_t */ - mov r1, r6 /* dest_addr */ - /* jump to it ... */ - mov pc, lr - -_board_init_r_ofs: - .word board_init_r - _start -#endif + bx lr _rel_dyn_start_ofs: .word __rel_dyn_start - _start @@ -276,6 +226,11 @@ _rel_dyn_end_ofs: _dynsym_start_ofs: .word __dynsym_start - _start + .globl c_runtime_cpu_setup +c_runtime_cpu_setup: + + mov pc, lr + /* ************************************************************************* * diff --git a/arch/arm/cpu/armv7/am33xx/Makefile b/arch/arm/cpu/armv7/am33xx/Makefile index 74875b3255..70c443edbb 100644 --- a/arch/arm/cpu/armv7/am33xx/Makefile +++ b/arch/arm/cpu/armv7/am33xx/Makefile @@ -18,10 +18,12 @@ LIB = $(obj)lib$(SOC).o COBJS += clock.o COBJS += sys_info.o +COBJS += mem.o COBJS += ddr.o COBJS += emif4.o COBJS += board.o COBJS += mux.o +COBJS-$(CONFIG_NAND_OMAP_GPMC) += elm.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS) $(COBJS-y) $(SOBJS)) diff --git a/arch/arm/cpu/armv7/am33xx/board.c b/arch/arm/cpu/armv7/am33xx/board.c index da5bc73185..ab313265d0 100644 --- a/arch/arm/cpu/armv7/am33xx/board.c +++ b/arch/arm/cpu/armv7/am33xx/board.c @@ -25,6 +25,7 @@ #include <asm/arch/ddr_defs.h> #include <asm/arch/clock.h> #include <asm/arch/gpio.h> +#include <asm/arch/mem.h> #include <asm/arch/mmc_host_def.h> #include <asm/arch/sys_proto.h> #include <asm/io.h> diff --git a/arch/arm/cpu/armv7/am33xx/clock.c b/arch/arm/cpu/armv7/am33xx/clock.c index 0b4cb4e529..d7d98d1111 100644 --- a/arch/arm/cpu/armv7/am33xx/clock.c +++ b/arch/arm/cpu/armv7/am33xx/clock.c @@ -151,6 +151,16 @@ static void enable_per_clocks(void) ; #endif /* CONFIG_SERIAL6 */ + /* GPMC */ + writel(PRCM_MOD_EN, &cmper->gpmcclkctrl); + while (readl(&cmper->gpmcclkctrl) != PRCM_MOD_EN) + ; + + /* ELM */ + writel(PRCM_MOD_EN, &cmper->elmclkctrl); + while (readl(&cmper->elmclkctrl) != PRCM_MOD_EN) + ; + /* MMC0*/ writel(PRCM_MOD_EN, &cmper->mmc0clkctrl); while (readl(&cmper->mmc0clkctrl) != PRCM_MOD_EN) diff --git a/arch/arm/cpu/armv7/am33xx/elm.c b/arch/arm/cpu/armv7/am33xx/elm.c new file mode 100644 index 0000000000..9eed23d75a --- /dev/null +++ b/arch/arm/cpu/armv7/am33xx/elm.c @@ -0,0 +1,212 @@ +/* + * (C) Copyright 2010-2011 Texas Instruments, <www.ti.com> + * Mansoor Ahamed <mansoor.ahamed@ti.com> + * + * BCH Error Location Module (ELM) support. + * + * NOTE: + * 1. Supports only continuous mode. Dont see need for page mode in uboot + * 2. Supports only syndrome polynomial 0. i.e. poly local variable is + * always set to ELM_DEFAULT_POLY. Dont see need for other polynomial + * sets in uboot + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/errno.h> +#include <asm/arch/cpu.h> +#include <asm/arch/omap_gpmc.h> +#include <asm/arch/elm.h> + +#define ELM_DEFAULT_POLY (0) + +struct elm *elm_cfg; + +/** + * elm_load_syndromes - Load BCH syndromes based on nibble selection + * @syndrome: BCH syndrome + * @nibbles: + * @poly: Syndrome Polynomial set to use + * + * Load BCH syndromes based on nibble selection + */ +static void elm_load_syndromes(u8 *syndrome, u32 nibbles, u8 poly) +{ + u32 *ptr; + u32 val; + + /* reg 0 */ + ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[0]; + val = syndrome[0] | (syndrome[1] << 8) | (syndrome[2] << 16) | + (syndrome[3] << 24); + writel(val, ptr); + /* reg 1 */ + ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[1]; + val = syndrome[4] | (syndrome[5] << 8) | (syndrome[6] << 16) | + (syndrome[7] << 24); + writel(val, ptr); + + /* BCH 8-bit with 26 nibbles (4*8=32) */ + if (nibbles > 13) { + /* reg 2 */ + ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[2]; + val = syndrome[8] | (syndrome[9] << 8) | (syndrome[10] << 16) | + (syndrome[11] << 24); + writel(val, ptr); + /* reg 3 */ + ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[3]; + val = syndrome[12] | (syndrome[13] << 8) | + (syndrome[14] << 16) | (syndrome[15] << 24); + writel(val, ptr); + } + + /* BCH 16-bit with 52 nibbles (7*8=56) */ + if (nibbles > 26) { + /* reg 4 */ + ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[4]; + val = syndrome[16] | (syndrome[17] << 8) | + (syndrome[18] << 16) | (syndrome[19] << 24); + writel(val, ptr); + + /* reg 5 */ + ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[5]; + val = syndrome[20] | (syndrome[21] << 8) | + (syndrome[22] << 16) | (syndrome[23] << 24); + writel(val, ptr); + + /* reg 6 */ + ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[6]; + val = syndrome[24] | (syndrome[25] << 8) | + (syndrome[26] << 16) | (syndrome[27] << 24); + writel(val, ptr); + } +} + +/** + * elm_check_errors - Check for BCH errors and return error locations + * @syndrome: BCH syndrome + * @nibbles: + * @error_count: Returns number of errrors in the syndrome + * @error_locations: Returns error locations (in decimal) in this array + * + * Check the provided syndrome for BCH errors and return error count + * and locations in the array passed. Returns -1 if error is not correctable, + * else returns 0 + */ +int elm_check_error(u8 *syndrome, u32 nibbles, u32 *error_count, + u32 *error_locations) +{ + u8 poly = ELM_DEFAULT_POLY; + s8 i; + u32 location_status; + + elm_load_syndromes(syndrome, nibbles, poly); + + /* start processing */ + writel((readl(&elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[6]) + | ELM_SYNDROME_FRAGMENT_6_SYNDROME_VALID), + &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[6]); + + /* wait for processing to complete */ + while ((readl(&elm_cfg->irqstatus) & (0x1 << poly)) != 0x1) + ; + /* clear status */ + writel((readl(&elm_cfg->irqstatus) | (0x1 << poly)), + &elm_cfg->irqstatus); + + /* check if correctable */ + location_status = readl(&elm_cfg->error_location[poly].location_status); + if (!(location_status & ELM_LOCATION_STATUS_ECC_CORRECTABLE_MASK)) + return -1; + + /* get error count */ + *error_count = readl(&elm_cfg->error_location[poly].location_status) & + ELM_LOCATION_STATUS_ECC_NB_ERRORS_MASK; + + for (i = 0; i < *error_count; i++) { + error_locations[i] = + readl(&elm_cfg->error_location[poly].error_location_x[i]); + } + + return 0; +} + + +/** + * elm_config - Configure ELM module + * @level: 4 / 8 / 16 bit BCH + * + * Configure ELM module based on BCH level. + * Set mode as continuous mode. + * Currently we are using only syndrome 0 and syndromes 1 to 6 are not used. + * Also, the mode is set only for syndrome 0 + */ +int elm_config(enum bch_level level) +{ + u32 val; + u8 poly = ELM_DEFAULT_POLY; + u32 buffer_size = 0x7FF; + + /* config size and level */ + val = (u32)(level) & ELM_LOCATION_CONFIG_ECC_BCH_LEVEL_MASK; + val |= ((buffer_size << ELM_LOCATION_CONFIG_ECC_SIZE_POS) & + ELM_LOCATION_CONFIG_ECC_SIZE_MASK); + writel(val, &elm_cfg->location_config); + + /* config continous mode */ + /* enable interrupt generation for syndrome polynomial set */ + writel((readl(&elm_cfg->irqenable) | (0x1 << poly)), + &elm_cfg->irqenable); + /* set continuous mode for the syndrome polynomial set */ + writel((readl(&elm_cfg->page_ctrl) & ~(0x1 << poly)), + &elm_cfg->page_ctrl); + + return 0; +} + +/** + * elm_reset - Do a soft reset of ELM + * + * Perform a soft reset of ELM and return after reset is done. + */ +void elm_reset(void) +{ + /* initiate reset */ + writel((readl(&elm_cfg->sysconfig) | ELM_SYSCONFIG_SOFTRESET), + &elm_cfg->sysconfig); + + /* wait for reset complete and normal operation */ + while ((readl(&elm_cfg->sysstatus) & ELM_SYSSTATUS_RESETDONE) != + ELM_SYSSTATUS_RESETDONE) + ; +} + +/** + * elm_init - Initialize ELM module + * + * Initialize ELM support. Currently it does only base address init + * and ELM reset. + */ +void elm_init(void) +{ + elm_cfg = (struct elm *)ELM_BASE; + elm_reset(); +} diff --git a/arch/arm/cpu/armv7/am33xx/mem.c b/arch/arm/cpu/armv7/am33xx/mem.c new file mode 100644 index 0000000000..b8f54abae2 --- /dev/null +++ b/arch/arm/cpu/armv7/am33xx/mem.c @@ -0,0 +1,101 @@ +/* + * (C) Copyright 2010 + * Texas Instruments, <www.ti.com> + * + * Author : + * Mansoor Ahamed <mansoor.ahamed@ti.com> + * + * Initial Code from: + * Manikandan Pillai <mani.pillai@ti.com> + * Richard Woodruff <r-woodruff2@ti.com> + * Syed Mohammed Khasim <khasim@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/cpu.h> +#include <asm/arch/mem.h> +#include <asm/arch/sys_proto.h> +#include <command.h> + +struct gpmc *gpmc_cfg; + +#if defined(CONFIG_CMD_NAND) +static const u32 gpmc_m_nand[GPMC_MAX_REG] = { + M_NAND_GPMC_CONFIG1, + M_NAND_GPMC_CONFIG2, + M_NAND_GPMC_CONFIG3, + M_NAND_GPMC_CONFIG4, + M_NAND_GPMC_CONFIG5, + M_NAND_GPMC_CONFIG6, 0 +}; +#endif + + +void enable_gpmc_cs_config(const u32 *gpmc_config, struct gpmc_cs *cs, u32 base, + u32 size) +{ + writel(0, &cs->config7); + sdelay(1000); + /* Delay for settling */ + writel(gpmc_config[0], &cs->config1); + writel(gpmc_config[1], &cs->config2); + writel(gpmc_config[2], &cs->config3); + writel(gpmc_config[3], &cs->config4); + writel(gpmc_config[4], &cs->config5); + writel(gpmc_config[5], &cs->config6); + /* Enable the config */ + writel((((size & 0xF) << 8) | ((base >> 24) & 0x3F) | + (1 << 6)), &cs->config7); + sdelay(2000); +} + +/***************************************************** + * gpmc_init(): init gpmc bus + * Init GPMC for x16, MuxMode (SDRAM in x32). + * This code can only be executed from SRAM or SDRAM. + *****************************************************/ +void gpmc_init(void) +{ + /* putting a blanket check on GPMC based on ZeBu for now */ + gpmc_cfg = (struct gpmc *)GPMC_BASE; + +#ifdef CONFIG_CMD_NAND + const u32 *gpmc_config = NULL; + u32 base = 0; + u32 size = 0; +#endif + /* global settings */ + writel(0x00000008, &gpmc_cfg->sysconfig); + writel(0x00000100, &gpmc_cfg->irqstatus); + writel(0x00000200, &gpmc_cfg->irqenable); + writel(0x00000012, &gpmc_cfg->config); + /* + * Disable the GPMC0 config set by ROM code + */ + writel(0, &gpmc_cfg->cs[0].config7); + sdelay(1000); + +#ifdef CONFIG_CMD_NAND + gpmc_config = gpmc_m_nand; + + base = PISMO1_NAND_BASE; + size = PISMO1_NAND_SIZE; + enable_gpmc_cs_config(gpmc_config, &gpmc_cfg->cs[0], base, size); +#endif +} diff --git a/arch/arm/cpu/armv7/cache_v7.c b/arch/arm/cpu/armv7/cache_v7.c index 1b4e808a79..5f6d0396f3 100644 --- a/arch/arm/cpu/armv7/cache_v7.c +++ b/arch/arm/cpu/armv7/cache_v7.c @@ -297,6 +297,12 @@ void arm_init_before_mmu(void) v7_inval_tlb(); } +void mmu_page_table_flush(unsigned long start, unsigned long stop) +{ + flush_dcache_range(start, stop); + v7_inval_tlb(); +} + /* * Flush range from all levels of d-cache/unified-cache used: * Affects the range [start, start + size - 1] @@ -329,6 +335,11 @@ void arm_init_before_mmu(void) void flush_cache(unsigned long start, unsigned long size) { } + +void mmu_page_table_flush(unsigned long start, unsigned long stop) +{ +} + #endif /* #ifndef CONFIG_SYS_DCACHE_OFF */ #ifndef CONFIG_SYS_ICACHE_OFF diff --git a/arch/arm/cpu/armv7/exynos/clock.c b/arch/arm/cpu/armv7/exynos/clock.c index 21e45d2e82..956427c9eb 100644 --- a/arch/arm/cpu/armv7/exynos/clock.c +++ b/arch/arm/cpu/armv7/exynos/clock.c @@ -25,42 +25,32 @@ #include <asm/io.h> #include <asm/arch/clock.h> #include <asm/arch/clk.h> - -/* exynos4: return pll clock frequency */ -static unsigned long exynos4_get_pll_clk(int pllreg) +#include <asm/arch/periph.h> + +/* Epll Clock division values to achive different frequency output */ +static struct set_epll_con_val exynos5_epll_div[] = { + { 192000000, 0, 48, 3, 1, 0 }, + { 180000000, 0, 45, 3, 1, 0 }, + { 73728000, 1, 73, 3, 3, 47710 }, + { 67737600, 1, 90, 4, 3, 20762 }, + { 49152000, 0, 49, 3, 3, 9961 }, + { 45158400, 0, 45, 3, 3, 10381 }, + { 180633600, 0, 45, 3, 1, 10381 } +}; + +/* exynos: return pll clock frequency */ +static int exynos_get_pll_clk(int pllreg, unsigned int r, unsigned int k) { - struct exynos4_clock *clk = - (struct exynos4_clock *)samsung_get_base_clock(); - unsigned long r, m, p, s, k = 0, mask, fout; + unsigned long m, p, s = 0, mask, fout; unsigned int freq; - - switch (pllreg) { - case APLL: - r = readl(&clk->apll_con0); - break; - case MPLL: - r = readl(&clk->mpll_con0); - break; - case EPLL: - r = readl(&clk->epll_con0); - k = readl(&clk->epll_con1); - break; - case VPLL: - r = readl(&clk->vpll_con0); - k = readl(&clk->vpll_con1); - break; - default: - printf("Unsupported PLL (%d)\n", pllreg); - return 0; - } - /* * APLL_CON: MIDV [25:16] * MPLL_CON: MIDV [25:16] * EPLL_CON: MIDV [24:16] * VPLL_CON: MIDV [24:16] + * BPLL_CON: MIDV [25:16]: Exynos5 */ - if (pllreg == APLL || pllreg == MPLL) + if (pllreg == APLL || pllreg == MPLL || pllreg == BPLL) mask = 0x3ff; else mask = 0x1ff; @@ -92,13 +82,73 @@ static unsigned long exynos4_get_pll_clk(int pllreg) return fout; } +/* exynos4: return pll clock frequency */ +static unsigned long exynos4_get_pll_clk(int pllreg) +{ + struct exynos4_clock *clk = + (struct exynos4_clock *)samsung_get_base_clock(); + unsigned long r, k = 0; + + switch (pllreg) { + case APLL: + r = readl(&clk->apll_con0); + break; + case MPLL: + r = readl(&clk->mpll_con0); + break; + case EPLL: + r = readl(&clk->epll_con0); + k = readl(&clk->epll_con1); + break; + case VPLL: + r = readl(&clk->vpll_con0); + k = readl(&clk->vpll_con1); + break; + default: + printf("Unsupported PLL (%d)\n", pllreg); + return 0; + } + + return exynos_get_pll_clk(pllreg, r, k); +} + +/* exynos4x12: return pll clock frequency */ +static unsigned long exynos4x12_get_pll_clk(int pllreg) +{ + struct exynos4x12_clock *clk = + (struct exynos4x12_clock *)samsung_get_base_clock(); + unsigned long r, k = 0; + + switch (pllreg) { + case APLL: + r = readl(&clk->apll_con0); + break; + case MPLL: + r = readl(&clk->mpll_con0); + break; + case EPLL: + r = readl(&clk->epll_con0); + k = readl(&clk->epll_con1); + break; + case VPLL: + r = readl(&clk->vpll_con0); + k = readl(&clk->vpll_con1); + break; + default: + printf("Unsupported PLL (%d)\n", pllreg); + return 0; + } + + return exynos_get_pll_clk(pllreg, r, k); +} + /* exynos5: return pll clock frequency */ static unsigned long exynos5_get_pll_clk(int pllreg) { struct exynos5_clock *clk = (struct exynos5_clock *)samsung_get_base_clock(); - unsigned long r, m, p, s, k = 0, mask, fout; - unsigned int freq, pll_div2_sel, fout_sel; + unsigned long r, k = 0, fout; + unsigned int pll_div2_sel, fout_sel; switch (pllreg) { case APLL: @@ -123,41 +173,7 @@ static unsigned long exynos5_get_pll_clk(int pllreg) return 0; } - /* - * APLL_CON: MIDV [25:16] - * MPLL_CON: MIDV [25:16] - * EPLL_CON: MIDV [24:16] - * VPLL_CON: MIDV [24:16] - * BPLL_CON: MIDV [25:16] - */ - if (pllreg == APLL || pllreg == MPLL || pllreg == BPLL) - mask = 0x3ff; - else - mask = 0x1ff; - - m = (r >> 16) & mask; - - /* PDIV [13:8] */ - p = (r >> 8) & 0x3f; - /* SDIV [2:0] */ - s = r & 0x7; - - freq = CONFIG_SYS_CLK_FREQ; - - if (pllreg == EPLL) { - k = k & 0xffff; - /* FOUT = (MDIV + K / 65536) * FIN / (PDIV * 2^SDIV) */ - fout = (m + k / 65536) * (freq / (p * (1 << s))); - } else if (pllreg == VPLL) { - k = k & 0xfff; - /* FOUT = (MDIV + K / 1024) * FIN / (PDIV * 2^SDIV) */ - fout = (m + k / 1024) * (freq / (p * (1 << s))); - } else { - if (s < 1) - s = 1; - /* FOUT = MDIV * FIN / (PDIV * 2^(SDIV - 1)) */ - fout = m * (freq / (p * (1 << (s - 1)))); - } + fout = exynos_get_pll_clk(pllreg, r, k); /* According to the user manual, in EVT1 MPLL and BPLL always gives * 1.6GHz clock, so divide by 2 to get 800MHz MPLL clock.*/ @@ -207,6 +223,28 @@ static unsigned long exynos4_get_arm_clk(void) return armclk; } +/* exynos4x12: return ARM clock frequency */ +static unsigned long exynos4x12_get_arm_clk(void) +{ + struct exynos4x12_clock *clk = + (struct exynos4x12_clock *)samsung_get_base_clock(); + unsigned long div; + unsigned long armclk; + unsigned int core_ratio; + unsigned int core2_ratio; + + div = readl(&clk->div_cpu0); + + /* CORE_RATIO: [2:0], CORE2_RATIO: [30:28] */ + core_ratio = (div >> 0) & 0x7; + core2_ratio = (div >> 28) & 0x7; + + armclk = get_pll_clk(APLL) / (core_ratio + 1); + armclk /= (core2_ratio + 1); + + return armclk; +} + /* exynos5: return ARM clock frequency */ static unsigned long exynos5_get_arm_clk(void) { @@ -272,6 +310,20 @@ static unsigned long exynos4_get_pwm_clk(void) return pclk; } +/* exynos4x12: return pwm clock frequency */ +static unsigned long exynos4x12_get_pwm_clk(void) +{ + unsigned long pclk, sclk; + unsigned int ratio; + + sclk = get_pll_clk(MPLL); + ratio = 8; + + pclk = sclk / (ratio + 1); + + return pclk; +} + /* exynos5: return pwm clock frequency */ static unsigned long exynos5_get_pwm_clk(void) { @@ -340,6 +392,51 @@ static unsigned long exynos4_get_uart_clk(int dev_index) return uclk; } +/* exynos4x12: return uart clock frequency */ +static unsigned long exynos4x12_get_uart_clk(int dev_index) +{ + struct exynos4x12_clock *clk = + (struct exynos4x12_clock *)samsung_get_base_clock(); + unsigned long uclk, sclk; + unsigned int sel; + unsigned int ratio; + + /* + * CLK_SRC_PERIL0 + * UART0_SEL [3:0] + * UART1_SEL [7:4] + * UART2_SEL [8:11] + * UART3_SEL [12:15] + * UART4_SEL [16:19] + */ + sel = readl(&clk->src_peril0); + sel = (sel >> (dev_index << 2)) & 0xf; + + if (sel == 0x6) + sclk = get_pll_clk(MPLL); + else if (sel == 0x7) + sclk = get_pll_clk(EPLL); + else if (sel == 0x8) + sclk = get_pll_clk(VPLL); + else + return 0; + + /* + * CLK_DIV_PERIL0 + * UART0_RATIO [3:0] + * UART1_RATIO [7:4] + * UART2_RATIO [8:11] + * UART3_RATIO [12:15] + * UART4_RATIO [16:19] + */ + ratio = readl(&clk->div_peril0); + ratio = (ratio >> (dev_index << 2)) & 0xf; + + uclk = sclk / (ratio + 1); + + return uclk; +} + /* exynos5: return uart clock frequency */ static unsigned long exynos5_get_uart_clk(int dev_index) { @@ -387,6 +484,100 @@ static unsigned long exynos5_get_uart_clk(int dev_index) return uclk; } +static unsigned long exynos4_get_mmc_clk(int dev_index) +{ + struct exynos4_clock *clk = + (struct exynos4_clock *)samsung_get_base_clock(); + unsigned long uclk, sclk; + unsigned int sel, ratio, pre_ratio; + int shift; + + sel = readl(&clk->src_fsys); + sel = (sel >> (dev_index << 2)) & 0xf; + + if (sel == 0x6) + sclk = get_pll_clk(MPLL); + else if (sel == 0x7) + sclk = get_pll_clk(EPLL); + else if (sel == 0x8) + sclk = get_pll_clk(VPLL); + else + return 0; + + switch (dev_index) { + case 0: + case 1: + ratio = readl(&clk->div_fsys1); + pre_ratio = readl(&clk->div_fsys1); + break; + case 2: + case 3: + ratio = readl(&clk->div_fsys2); + pre_ratio = readl(&clk->div_fsys2); + break; + case 4: + ratio = readl(&clk->div_fsys3); + pre_ratio = readl(&clk->div_fsys3); + break; + default: + return 0; + } + + if (dev_index == 1 || dev_index == 3) + shift = 16; + + ratio = (ratio >> shift) & 0xf; + pre_ratio = (pre_ratio >> (shift + 8)) & 0xff; + uclk = (sclk / (ratio + 1)) / (pre_ratio + 1); + + return uclk; +} + +static unsigned long exynos5_get_mmc_clk(int dev_index) +{ + struct exynos5_clock *clk = + (struct exynos5_clock *)samsung_get_base_clock(); + unsigned long uclk, sclk; + unsigned int sel, ratio, pre_ratio; + int shift; + + sel = readl(&clk->src_fsys); + sel = (sel >> (dev_index << 2)) & 0xf; + + if (sel == 0x6) + sclk = get_pll_clk(MPLL); + else if (sel == 0x7) + sclk = get_pll_clk(EPLL); + else if (sel == 0x8) + sclk = get_pll_clk(VPLL); + else + return 0; + + switch (dev_index) { + case 0: + case 1: + ratio = readl(&clk->div_fsys1); + pre_ratio = readl(&clk->div_fsys1); + break; + case 2: + case 3: + ratio = readl(&clk->div_fsys2); + pre_ratio = readl(&clk->div_fsys2); + break; + default: + return 0; + } + + if (dev_index == 1 || dev_index == 3) + shift = 16; + + ratio = (ratio >> shift) & 0xf; + pre_ratio = (pre_ratio >> (shift + 8)) & 0xff; + uclk = (sclk / (ratio + 1)) / (pre_ratio + 1); + + return uclk; +} + /* exynos4: set the mmc clock */ static void exynos4_set_mmc_clk(int dev_index, unsigned int div) { @@ -400,6 +591,38 @@ static void exynos4_set_mmc_clk(int dev_index, unsigned int div) * MMC0_PRE_RATIO [15:8], MMC1_PRE_RATIO [31:24] * CLK_DIV_FSYS2 * MMC2_PRE_RATIO [15:8], MMC3_PRE_RATIO [31:24] + * CLK_DIV_FSYS3 + * MMC4_PRE_RATIO [15:8] + */ + if (dev_index < 2) { + addr = (unsigned int)&clk->div_fsys1; + } else if (dev_index == 4) { + addr = (unsigned int)&clk->div_fsys3; + dev_index -= 4; + } else { + addr = (unsigned int)&clk->div_fsys2; + dev_index -= 2; + } + + val = readl(addr); + val &= ~(0xff << ((dev_index << 4) + 8)); + val |= (div & 0xff) << ((dev_index << 4) + 8); + writel(val, addr); +} + +/* exynos4x12: set the mmc clock */ +static void exynos4x12_set_mmc_clk(int dev_index, unsigned int div) +{ + struct exynos4x12_clock *clk = + (struct exynos4x12_clock *)samsung_get_base_clock(); + unsigned int addr; + unsigned int val; + + /* + * CLK_DIV_FSYS1 + * MMC0_PRE_RATIO [15:8], MMC1_PRE_RATIO [31:24] + * CLK_DIV_FSYS2 + * MMC2_PRE_RATIO [15:8], MMC3_PRE_RATIO [31:24] */ if (dev_index < 2) { addr = (unsigned int)&clk->div_fsys1; @@ -617,7 +840,7 @@ void exynos5_set_lcd_clk(void) */ cfg = readl(&clk->src_disp1_0); cfg &= ~(0xf); - cfg |= 0x8; + cfg |= 0x6; writel(cfg, &clk->src_disp1_0); /* @@ -732,6 +955,209 @@ static unsigned long exynos5_get_i2c_clk(void) return aclk_66; } +int exynos5_set_epll_clk(unsigned long rate) +{ + unsigned int epll_con, epll_con_k; + unsigned int i; + unsigned int lockcnt; + unsigned int start; + struct exynos5_clock *clk = + (struct exynos5_clock *)samsung_get_base_clock(); + + epll_con = readl(&clk->epll_con0); + epll_con &= ~((EPLL_CON0_LOCK_DET_EN_MASK << + EPLL_CON0_LOCK_DET_EN_SHIFT) | + EPLL_CON0_MDIV_MASK << EPLL_CON0_MDIV_SHIFT | + EPLL_CON0_PDIV_MASK << EPLL_CON0_PDIV_SHIFT | + EPLL_CON0_SDIV_MASK << EPLL_CON0_SDIV_SHIFT); + + for (i = 0; i < ARRAY_SIZE(exynos5_epll_div); i++) { + if (exynos5_epll_div[i].freq_out == rate) + break; + } + + if (i == ARRAY_SIZE(exynos5_epll_div)) + return -1; + + epll_con_k = exynos5_epll_div[i].k_dsm << 0; + epll_con |= exynos5_epll_div[i].en_lock_det << + EPLL_CON0_LOCK_DET_EN_SHIFT; + epll_con |= exynos5_epll_div[i].m_div << EPLL_CON0_MDIV_SHIFT; + epll_con |= exynos5_epll_div[i].p_div << EPLL_CON0_PDIV_SHIFT; + epll_con |= exynos5_epll_div[i].s_div << EPLL_CON0_SDIV_SHIFT; + + /* + * Required period ( in cycles) to genarate a stable clock output. + * The maximum clock time can be up to 3000 * PDIV cycles of PLLs + * frequency input (as per spec) + */ + lockcnt = 3000 * exynos5_epll_div[i].p_div; + + writel(lockcnt, &clk->epll_lock); + writel(epll_con, &clk->epll_con0); + writel(epll_con_k, &clk->epll_con1); + + start = get_timer(0); + + while (!(readl(&clk->epll_con0) & + (0x1 << EXYNOS5_EPLLCON0_LOCKED_SHIFT))) { + if (get_timer(start) > TIMEOUT_EPLL_LOCK) { + debug("%s: Timeout waiting for EPLL lock\n", __func__); + return -1; + } + } + return 0; +} + +void exynos5_set_i2s_clk_source(void) +{ + struct exynos5_clock *clk = + (struct exynos5_clock *)samsung_get_base_clock(); + + clrsetbits_le32(&clk->src_peric1, AUDIO1_SEL_MASK, + (CLK_SRC_SCLK_EPLL)); +} + +int exynos5_set_i2s_clk_prescaler(unsigned int src_frq, + unsigned int dst_frq) +{ + struct exynos5_clock *clk = + (struct exynos5_clock *)samsung_get_base_clock(); + unsigned int div; + + if ((dst_frq == 0) || (src_frq == 0)) { + debug("%s: Invalid requency input for prescaler\n", __func__); + debug("src frq = %d des frq = %d ", src_frq, dst_frq); + return -1; + } + + div = (src_frq / dst_frq); + if (div > AUDIO_1_RATIO_MASK) { + debug("%s: Frequency ratio is out of range\n", __func__); + debug("src frq = %d des frq = %d ", src_frq, dst_frq); + return -1; + } + clrsetbits_le32(&clk->div_peric4, AUDIO_1_RATIO_MASK, + (div & AUDIO_1_RATIO_MASK)); + return 0; +} + +/** + * Linearly searches for the most accurate main and fine stage clock scalars + * (divisors) for a specified target frequency and scalar bit sizes by checking + * all multiples of main_scalar_bits values. Will always return scalars up to or + * slower than target. + * + * @param main_scalar_bits Number of main scalar bits, must be > 0 and < 32 + * @param fine_scalar_bits Number of fine scalar bits, must be > 0 and < 32 + * @param input_freq Clock frequency to be scaled in Hz + * @param target_freq Desired clock frequency in Hz + * @param best_fine_scalar Pointer to store the fine stage divisor + * + * @return best_main_scalar Main scalar for desired frequency or -1 if none + * found + */ +static int clock_calc_best_scalar(unsigned int main_scaler_bits, + unsigned int fine_scalar_bits, unsigned int input_rate, + unsigned int target_rate, unsigned int *best_fine_scalar) +{ + int i; + int best_main_scalar = -1; + unsigned int best_error = target_rate; + const unsigned int cap = (1 << fine_scalar_bits) - 1; + const unsigned int loops = 1 << main_scaler_bits; + + debug("Input Rate is %u, Target is %u, Cap is %u\n", input_rate, + target_rate, cap); + + assert(best_fine_scalar != NULL); + assert(main_scaler_bits <= fine_scalar_bits); + + *best_fine_scalar = 1; + + if (input_rate == 0 || target_rate == 0) + return -1; + + if (target_rate >= input_rate) + return 1; + + for (i = 1; i <= loops; i++) { + const unsigned int effective_div = max(min(input_rate / i / + target_rate, cap), 1); + const unsigned int effective_rate = input_rate / i / + effective_div; + const int error = target_rate - effective_rate; + + debug("%d|effdiv:%u, effrate:%u, error:%d\n", i, effective_div, + effective_rate, error); + + if (error >= 0 && error <= best_error) { + best_error = error; + best_main_scalar = i; + *best_fine_scalar = effective_div; + } + } + + return best_main_scalar; +} + +static int exynos5_set_spi_clk(enum periph_id periph_id, + unsigned int rate) +{ + struct exynos5_clock *clk = + (struct exynos5_clock *)samsung_get_base_clock(); + int main; + unsigned int fine; + unsigned shift, pre_shift; + unsigned mask = 0xff; + u32 *reg; + + main = clock_calc_best_scalar(4, 8, 400000000, rate, &fine); + if (main < 0) { + debug("%s: Cannot set clock rate for periph %d", + __func__, periph_id); + return -1; + } + main = main - 1; + fine = fine - 1; + + switch (periph_id) { + case PERIPH_ID_SPI0: + reg = &clk->div_peric1; + shift = 0; + pre_shift = 8; + break; + case PERIPH_ID_SPI1: + reg = &clk->div_peric1; + shift = 16; + pre_shift = 24; + break; + case PERIPH_ID_SPI2: + reg = &clk->div_peric2; + shift = 0; + pre_shift = 8; + break; + case PERIPH_ID_SPI3: + reg = &clk->sclk_div_isp; + shift = 0; + pre_shift = 4; + break; + case PERIPH_ID_SPI4: + reg = &clk->sclk_div_isp; + shift = 12; + pre_shift = 16; + break; + default: + debug("%s: Unsupported peripheral ID %d\n", __func__, + periph_id); + return -1; + } + clrsetbits_le32(reg, mask << shift, (main & mask) << shift); + clrsetbits_le32(reg, mask << pre_shift, (fine & mask) << pre_shift); + + return 0; +} + static unsigned long exynos4_get_i2c_clk(void) { struct exynos4_clock *clk = @@ -751,16 +1177,22 @@ unsigned long get_pll_clk(int pllreg) { if (cpu_is_exynos5()) return exynos5_get_pll_clk(pllreg); - else + else { + if (proid_is_exynos4412()) + return exynos4x12_get_pll_clk(pllreg); return exynos4_get_pll_clk(pllreg); + } } unsigned long get_arm_clk(void) { if (cpu_is_exynos5()) return exynos5_get_arm_clk(); - else + else { + if (proid_is_exynos4412()) + return exynos4x12_get_arm_clk(); return exynos4_get_arm_clk(); + } } unsigned long get_i2c_clk(void) @@ -779,24 +1211,41 @@ unsigned long get_pwm_clk(void) { if (cpu_is_exynos5()) return exynos5_get_pwm_clk(); - else + else { + if (proid_is_exynos4412()) + return exynos4x12_get_pwm_clk(); return exynos4_get_pwm_clk(); + } } unsigned long get_uart_clk(int dev_index) { if (cpu_is_exynos5()) return exynos5_get_uart_clk(dev_index); - else + else { + if (proid_is_exynos4412()) + return exynos4x12_get_uart_clk(dev_index); return exynos4_get_uart_clk(dev_index); + } +} + +unsigned long get_mmc_clk(int dev_index) +{ + if (cpu_is_exynos5()) + return exynos5_get_mmc_clk(dev_index); + else + return exynos4_get_mmc_clk(dev_index); } void set_mmc_clk(int dev_index, unsigned int div) { if (cpu_is_exynos5()) exynos5_set_mmc_clk(dev_index, div); - else + else { + if (proid_is_exynos4412()) + exynos4x12_set_mmc_clk(dev_index, div); exynos4_set_mmc_clk(dev_index, div); + } } unsigned long get_lcd_clk(void) @@ -820,3 +1269,34 @@ void set_mipi_clk(void) if (cpu_is_exynos4()) exynos4_set_mipi_clk(); } + +int set_spi_clk(int periph_id, unsigned int rate) +{ + if (cpu_is_exynos5()) + return exynos5_set_spi_clk(periph_id, rate); + else + return 0; +} + +int set_i2s_clk_prescaler(unsigned int src_frq, unsigned int dst_frq) +{ + + if (cpu_is_exynos5()) + return exynos5_set_i2s_clk_prescaler(src_frq, dst_frq); + else + return 0; +} + +void set_i2s_clk_source(void) +{ + if (cpu_is_exynos5()) + exynos5_set_i2s_clk_source(); +} + +int set_epll_clk(unsigned long rate) +{ + if (cpu_is_exynos5()) + return exynos5_set_epll_clk(rate); + else + return 0; +} diff --git a/arch/arm/cpu/armv7/exynos/pinmux.c b/arch/arm/cpu/armv7/exynos/pinmux.c index 44ce0726e9..bd499b4761 100644 --- a/arch/arm/cpu/armv7/exynos/pinmux.c +++ b/arch/arm/cpu/armv7/exynos/pinmux.c @@ -22,6 +22,7 @@ */ #include <common.h> +#include <fdtdec.h> #include <asm/arch/gpio.h> #include <asm/arch/pinmux.h> #include <asm/arch/sromc.h> @@ -112,6 +113,7 @@ static int exynos5_mmc_config(int peripheral, int flags) s5p_gpio_set_pull(bank, i, GPIO_PULL_UP); s5p_gpio_set_drv(bank, i, GPIO_DRV_4X); } + return 0; } @@ -230,6 +232,59 @@ static void exynos5_i2c_config(int peripheral, int flags) } } +static void exynos5_i2s_config(int peripheral) +{ + int i; + struct exynos5_gpio_part1 *gpio1 = + (struct exynos5_gpio_part1 *) samsung_get_base_gpio_part1(); + + for (i = 0; i < 5; i++) + s5p_gpio_cfg_pin(&gpio1->b0, i, GPIO_FUNC(0x02)); +} + +void exynos5_spi_config(int peripheral) +{ + int cfg = 0, pin = 0, i; + struct s5p_gpio_bank *bank = NULL; + struct exynos5_gpio_part1 *gpio1 = + (struct exynos5_gpio_part1 *) samsung_get_base_gpio_part1(); + struct exynos5_gpio_part2 *gpio2 = + (struct exynos5_gpio_part2 *) samsung_get_base_gpio_part2(); + + switch (peripheral) { + case PERIPH_ID_SPI0: + bank = &gpio1->a2; + cfg = GPIO_FUNC(0x2); + pin = 0; + break; + case PERIPH_ID_SPI1: + bank = &gpio1->a2; + cfg = GPIO_FUNC(0x2); + pin = 4; + break; + case PERIPH_ID_SPI2: + bank = &gpio1->b1; + cfg = GPIO_FUNC(0x5); + pin = 1; + break; + case PERIPH_ID_SPI3: + bank = &gpio2->f1; + cfg = GPIO_FUNC(0x2); + pin = 0; + break; + case PERIPH_ID_SPI4: + for (i = 0; i < 2; i++) { + s5p_gpio_cfg_pin(&gpio2->f0, i + 2, GPIO_FUNC(0x4)); + s5p_gpio_cfg_pin(&gpio2->e0, i + 4, GPIO_FUNC(0x4)); + } + break; + } + if (peripheral != PERIPH_ID_SPI4) { + for (i = pin; i < pin + 4; i++) + s5p_gpio_cfg_pin(bank, i, cfg); + } +} + static int exynos5_pinmux_config(int peripheral, int flags) { switch (peripheral) { @@ -257,6 +312,16 @@ static int exynos5_pinmux_config(int peripheral, int flags) case PERIPH_ID_I2C7: exynos5_i2c_config(peripheral, flags); break; + case PERIPH_ID_I2S1: + exynos5_i2s_config(peripheral); + break; + case PERIPH_ID_SPI0: + case PERIPH_ID_SPI1: + case PERIPH_ID_SPI2: + case PERIPH_ID_SPI3: + case PERIPH_ID_SPI4: + exynos5_spi_config(peripheral); + break; default: debug("%s: invalid peripheral %d", __func__, peripheral); return -1; @@ -306,6 +371,43 @@ static void exynos4_i2c_config(int peripheral, int flags) } } +static int exynos4_mmc_config(int peripheral, int flags) +{ + struct exynos4_gpio_part2 *gpio2 = + (struct exynos4_gpio_part2 *)samsung_get_base_gpio_part2(); + struct s5p_gpio_bank *bank, *bank_ext; + int i; + + switch (peripheral) { + case PERIPH_ID_SDMMC0: + bank = &gpio2->k0; + bank_ext = &gpio2->k1; + break; + case PERIPH_ID_SDMMC2: + bank = &gpio2->k2; + bank_ext = &gpio2->k3; + break; + default: + return -1; + } + for (i = 0; i < 7; i++) { + if (i == 2) + continue; + s5p_gpio_cfg_pin(bank, i, GPIO_FUNC(0x2)); + s5p_gpio_set_pull(bank, i, GPIO_PULL_NONE); + s5p_gpio_set_drv(bank, i, GPIO_DRV_4X); + } + if (flags & PINMUX_FLAG_8BIT_MODE) { + for (i = 3; i < 7; i++) { + s5p_gpio_cfg_pin(bank_ext, i, GPIO_FUNC(0x3)); + s5p_gpio_set_pull(bank_ext, i, GPIO_PULL_NONE); + s5p_gpio_set_drv(bank_ext, i, GPIO_DRV_4X); + } + } + + return 0; +} + static int exynos4_pinmux_config(int peripheral, int flags) { switch (peripheral) { @@ -319,6 +421,14 @@ static int exynos4_pinmux_config(int peripheral, int flags) case PERIPH_ID_I2C7: exynos4_i2c_config(peripheral, flags); break; + case PERIPH_ID_SDMMC0: + case PERIPH_ID_SDMMC2: + return exynos4_mmc_config(peripheral, flags); + case PERIPH_ID_SDMMC1: + case PERIPH_ID_SDMMC3: + case PERIPH_ID_SDMMC4: + printf("SDMMC device %d not implemented\n", peripheral); + return -1; default: debug("%s: invalid peripheral %d", __func__, peripheral); return -1; @@ -338,3 +448,31 @@ int exynos_pinmux_config(int peripheral, int flags) return -1; } } + +#ifdef CONFIG_OF_CONTROL +static int exynos5_pinmux_decode_periph_id(const void *blob, int node) +{ + int err; + u32 cell[3]; + + err = fdtdec_get_int_array(blob, node, "interrupts", cell, + ARRAY_SIZE(cell)); + if (err) + return PERIPH_ID_NONE; + + /* check for invalid peripheral id */ + if ((PERIPH_ID_SDMMC4 > cell[1]) || (cell[1] < PERIPH_ID_UART0)) + return cell[1]; + + debug(" invalid peripheral id\n"); + return PERIPH_ID_NONE; +} + +int pinmux_decode_periph_id(const void *blob, int node) +{ + if (cpu_is_exynos5()) + return exynos5_pinmux_decode_periph_id(blob, node); + else + return PERIPH_ID_NONE; +} +#endif diff --git a/arch/arm/cpu/armv7/mx5/clock.c b/arch/arm/cpu/armv7/mx5/clock.c index 1c9223fa07..76c2c529a8 100644 --- a/arch/arm/cpu/armv7/mx5/clock.c +++ b/arch/arm/cpu/armv7/mx5/clock.c @@ -928,7 +928,9 @@ int do_mx5_showclocks(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) printf("IPG %8d kHz\n", mxc_get_clock(MXC_IPG_CLK) / 1000); printf("IPG PERCLK %8d kHz\n", mxc_get_clock(MXC_IPG_PERCLK) / 1000); printf("DDR %8d kHz\n", mxc_get_clock(MXC_DDR_CLK) / 1000); - +#ifdef CONFIG_MXC_SPI + printf("CSPI %8d kHz\n", mxc_get_clock(MXC_CSPI_CLK) / 1000); +#endif return 0; } diff --git a/arch/arm/cpu/armv7/mx5/lowlevel_init.S b/arch/arm/cpu/armv7/mx5/lowlevel_init.S index 29ec95797b..6d9396a976 100644 --- a/arch/arm/cpu/armv7/mx5/lowlevel_init.S +++ b/arch/arm/cpu/armv7/mx5/lowlevel_init.S @@ -396,7 +396,7 @@ ENTRY(lowlevel_init) mov r10, lr mov r4, #0 /* Fix R4 to 0 */ -#if defined(CONFIG_MX51) +#if defined(CONFIG_SYS_MAIN_PWR_ON) ldr r0, =GPIO1_BASE_ADDR ldr r1, [r0, #0x0] orr r1, r1, #1 << 23 diff --git a/arch/arm/cpu/armv7/mx6/clock.c b/arch/arm/cpu/armv7/mx6/clock.c index a01d96f48e..a50db70b19 100644 --- a/arch/arm/cpu/armv7/mx6/clock.c +++ b/arch/arm/cpu/armv7/mx6/clock.c @@ -404,7 +404,9 @@ int do_mx6_showclocks(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) printf("\n"); printf("IPG %8d kHz\n", mxc_get_clock(MXC_IPG_CLK) / 1000); printf("UART %8d kHz\n", mxc_get_clock(MXC_UART_CLK) / 1000); +#ifdef CONFIG_MXC_SPI printf("CSPI %8d kHz\n", mxc_get_clock(MXC_CSPI_CLK) / 1000); +#endif printf("AHB %8d kHz\n", mxc_get_clock(MXC_AHB_CLK) / 1000); printf("AXI %8d kHz\n", mxc_get_clock(MXC_AXI_CLK) / 1000); printf("DDR %8d kHz\n", mxc_get_clock(MXC_DDR_CLK) / 1000); diff --git a/arch/arm/cpu/armv7/mx6/lowlevel_init.S b/arch/arm/cpu/armv7/mx6/lowlevel_init.S index acadef221c..7b60ca7454 100644 --- a/arch/arm/cpu/armv7/mx6/lowlevel_init.S +++ b/arch/arm/cpu/armv7/mx6/lowlevel_init.S @@ -20,6 +20,16 @@ #include <linux/linkage.h> +.macro init_arm_errata + /* ARM erratum ID #743622 */ + mrc p15, 0, r10, c15, c0, 1 /* read diagnostic register */ + orr r10, r10, #1 << 6 /* set bit #6 */ + /* ARM erratum ID #751472 */ + orr r10, r10, #1 << 11 /* set bit #11 */ + mcr p15, 0, r10, c15, c0, 1 /* write diagnostic register */ +.endm + ENTRY(lowlevel_init) + init_arm_errata mov pc, lr ENDPROC(lowlevel_init) diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c index bc65767e7d..a8aad5dd0a 100644 --- a/arch/arm/cpu/armv7/mx6/soc.c +++ b/arch/arm/cpu/armv7/mx6/soc.c @@ -31,17 +31,33 @@ #include <asm/arch/sys_proto.h> #include <asm/imx-common/boot_mode.h> +struct scu_regs { + u32 ctrl; + u32 config; + u32 status; + u32 invalidate; + u32 fpga_rev; +}; + u32 get_cpu_rev(void) { struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR; - int reg = readl(&anatop->digprog); - - /* Read mx6 variant: quad, dual or solo */ - int system_rev = (reg >> 4) & 0xFF000; - /* Read mx6 silicon revision */ - system_rev |= (reg & 0xFF) + 0x10; - - return system_rev; + u32 reg = readl(&anatop->digprog_sololite); + u32 type = ((reg >> 16) & 0xff); + + if (type != MXC_CPU_MX6SL) { + reg = readl(&anatop->digprog); + type = ((reg >> 16) & 0xff); + if (type == MXC_CPU_MX6DL) { + struct scu_regs *scu = (struct scu_regs *)SCU_BASE_ADDR; + u32 cfg = readl(&scu->config) & 3; + + if (!cfg) + type = MXC_CPU_MX6SOLO; + } + } + reg &= 0xff; /* mx6 silicon revision */ + return (type << 12) | (reg + 0x10); } void init_aips(void) diff --git a/arch/arm/cpu/armv7/omap-common/Makefile b/arch/arm/cpu/armv7/omap-common/Makefile index 1f2fa027c8..0efc80ddeb 100644 --- a/arch/arm/cpu/armv7/omap-common/Makefile +++ b/arch/arm/cpu/armv7/omap-common/Makefile @@ -25,9 +25,8 @@ include $(TOPDIR)/config.mk LIB = $(obj)libomap-common.o -SOBJS := reset.o - -COBJS := timer.o +COBJS := reset.o +COBJS += timer.o COBJS += utils.o ifneq ($(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX),) diff --git a/arch/arm/cpu/armv7/omap-common/boot-common.c b/arch/arm/cpu/armv7/omap-common/boot-common.c index 0f19141cc2..2b584e0a53 100644 --- a/arch/arm/cpu/armv7/omap-common/boot-common.c +++ b/arch/arm/cpu/armv7/omap-common/boot-common.c @@ -21,6 +21,7 @@ #include <asm/omap_common.h> #include <asm/arch/omap.h> #include <asm/arch/mmc_host_def.h> +#include <asm/arch/sys_proto.h> /* * This is used to verify if the configuration header diff --git a/arch/arm/cpu/armv7/omap-common/emif-common.c b/arch/arm/cpu/armv7/omap-common/emif-common.c index 30dcf1b0b0..88253cf8ce 100644 --- a/arch/arm/cpu/armv7/omap-common/emif-common.c +++ b/arch/arm/cpu/armv7/omap-common/emif-common.c @@ -33,6 +33,8 @@ #include <asm/utils.h> #include <linux/compiler.h> +static int emif1_enabled = -1, emif2_enabled = -1; + void set_lpmode_selfrefresh(u32 base) { struct emif_reg_struct *emif = (struct emif_reg_struct *)base; @@ -1109,6 +1111,7 @@ void emif_post_init_config(u32 base) void dmm_init(u32 base) { const struct dmm_lisa_map_regs *lisa_map_regs; + u32 i, section, valid; #ifdef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS emif_get_dmm_regs(&lisa_map_regs); @@ -1216,6 +1219,29 @@ void dmm_init(u32 base) writel(lisa_map_regs->dmm_lisa_map_0, &hw_lisa_map_regs->dmm_lisa_map_0); } + + /* + * EMIF should be configured only when + * memory is mapped on it. Using emif1_enabled + * and emif2_enabled variables for this. + */ + emif1_enabled = 0; + emif2_enabled = 0; + for (i = 0; i < 4; i++) { + section = __raw_readl(DMM_BASE + i*4); + valid = (section & EMIF_SDRC_MAP_MASK) >> + (EMIF_SDRC_MAP_SHIFT); + if (valid == 3) { + emif1_enabled = 1; + emif2_enabled = 1; + break; + } else if (valid == 1) { + emif1_enabled = 1; + } else if (valid == 2) { + emif2_enabled = 1; + } + } + } /* @@ -1255,15 +1281,20 @@ void sdram_init(void) writel(CM_DLL_CTRL_NO_OVERRIDE, &prcm->cm_dll_ctrl); } - do_sdram_init(EMIF1_BASE); - do_sdram_init(EMIF2_BASE); - if (!in_sdram) dmm_init(DMM_BASE); + if (emif1_enabled) + do_sdram_init(EMIF1_BASE); + + if (emif2_enabled) + do_sdram_init(EMIF2_BASE); + if (!(in_sdram || warm_reset())) { - emif_post_init_config(EMIF1_BASE); - emif_post_init_config(EMIF2_BASE); + if (emif1_enabled) + emif_post_init_config(EMIF1_BASE); + if (emif2_enabled) + emif_post_init_config(EMIF2_BASE); } /* for the shadow registers to take effect */ diff --git a/arch/arm/cpu/armv7/omap3/board.c b/arch/arm/cpu/armv7/omap3/board.c index f3cd81ad98..89c587e310 100644 --- a/arch/arm/cpu/armv7/omap3/board.c +++ b/arch/arm/cpu/armv7/omap3/board.c @@ -478,7 +478,7 @@ void omap3_outer_cache_disable(void) */ omap3_update_aux_cr(0, 0x2); } -#endif +#endif /* !CONFIG_SYS_L2CACHE_OFF */ #ifndef CONFIG_SYS_DCACHE_OFF void enable_caches(void) @@ -486,4 +486,4 @@ void enable_caches(void) /* Enable D-cache. I-cache is already enabled in start.S */ dcache_enable(); } -#endif +#endif /* !CONFIG_SYS_DCACHE_OFF */ diff --git a/arch/arm/cpu/armv7/omap3/mem.c b/arch/arm/cpu/armv7/omap3/mem.c index 2fe5ac7c39..d04a5a10d7 100644 --- a/arch/arm/cpu/armv7/omap3/mem.c +++ b/arch/arm/cpu/armv7/omap3/mem.c @@ -42,14 +42,7 @@ static const u32 gpmc_m_nand[GPMC_MAX_REG] = { M_NAND_GPMC_CONFIG5, M_NAND_GPMC_CONFIG6, 0 }; - -#if defined(CONFIG_ENV_IS_IN_NAND) -#define GPMC_CS 0 -#else -#define GPMC_CS 1 -#endif - -#endif +#endif /* CONFIG_CMD_NAND */ #if defined(CONFIG_CMD_ONENAND) static const u32 gpmc_onenand[GPMC_MAX_REG] = { @@ -60,14 +53,7 @@ static const u32 gpmc_onenand[GPMC_MAX_REG] = { ONENAND_GPMC_CONFIG5, ONENAND_GPMC_CONFIG6, 0 }; - -#if defined(CONFIG_ENV_IS_IN_ONENAND) -#define GPMC_CS 0 -#else -#define GPMC_CS 1 -#endif - -#endif +#endif /* CONFIG_CMD_ONENAND */ /******************************************************** * mem_ok() - test used to see if timings are correct diff --git a/arch/arm/cpu/armv7/omap3/sdrc.c b/arch/arm/cpu/armv7/omap3/sdrc.c index f6d9b97bb4..e32bf118b1 100644 --- a/arch/arm/cpu/armv7/omap3/sdrc.c +++ b/arch/arm/cpu/armv7/omap3/sdrc.c @@ -113,18 +113,18 @@ u32 get_sdr_cs_offset(u32 cs) * - Test CS to make sure it's OK for use */ static void write_sdrc_timings(u32 cs, struct sdrc_actim *sdrc_actim_base, - u32 mcfg, u32 ctrla, u32 ctrlb, u32 rfr_ctrl, u32 mr) + struct board_sdrc_timings *timings) { /* Setup timings we got from the board. */ - writel(mcfg, &sdrc_base->cs[cs].mcfg); - writel(ctrla, &sdrc_actim_base->ctrla); - writel(ctrlb, &sdrc_actim_base->ctrlb); - writel(rfr_ctrl, &sdrc_base->cs[cs].rfr_ctrl); + writel(timings->mcfg, &sdrc_base->cs[cs].mcfg); + writel(timings->ctrla, &sdrc_actim_base->ctrla); + writel(timings->ctrlb, &sdrc_actim_base->ctrlb); + writel(timings->rfr_ctrl, &sdrc_base->cs[cs].rfr_ctrl); writel(CMD_NOP, &sdrc_base->cs[cs].manual); writel(CMD_PRECHARGE, &sdrc_base->cs[cs].manual); writel(CMD_AUTOREFRESH, &sdrc_base->cs[cs].manual); writel(CMD_AUTOREFRESH, &sdrc_base->cs[cs].manual); - writel(mr, &sdrc_base->cs[cs].mr); + writel(timings->mr, &sdrc_base->cs[cs].mr); /* * Test ram in this bank @@ -143,7 +143,7 @@ static void write_sdrc_timings(u32 cs, struct sdrc_actim *sdrc_actim_base, void do_sdrc_init(u32 cs, u32 early) { struct sdrc_actim *sdrc_actim_base0, *sdrc_actim_base1; - u32 mcfg, ctrla, ctrlb, rfr_ctrl, mr; + struct board_sdrc_timings timings; sdrc_actim_base0 = (struct sdrc_actim *)SDRC_ACTIM_CTRL0_BASE; sdrc_actim_base1 = (struct sdrc_actim *)SDRC_ACTIM_CTRL1_BASE; @@ -158,7 +158,7 @@ void do_sdrc_init(u32 cs, u32 early) * setup CS1. */ #ifdef CONFIG_SPL_BUILD - get_board_mem_timings(&mcfg, &ctrla, &ctrlb, &rfr_ctrl, &mr); + get_board_mem_timings(&timings); #endif if (early) { /* reset sdrc controller */ @@ -177,11 +177,9 @@ void do_sdrc_init(u32 cs, u32 early) writel(ENADLL | DLLPHASE_90, &sdrc_base->dlla_ctrl); sdelay(0x20000); #ifdef CONFIG_SPL_BUILD - write_sdrc_timings(CS0, sdrc_actim_base0, mcfg, ctrla, ctrlb, - rfr_ctrl, mr); + write_sdrc_timings(CS0, sdrc_actim_base0, &timings); make_cs1_contiguous(); - write_sdrc_timings(CS1, sdrc_actim_base1, mcfg, ctrla, ctrlb, - rfr_ctrl, mr); + write_sdrc_timings(CS1, sdrc_actim_base1, &timings); #endif } @@ -193,14 +191,12 @@ void do_sdrc_init(u32 cs, u32 early) * so we may be asked now to setup CS1. */ if (cs == CS1) { - mcfg = readl(&sdrc_base->cs[CS0].mcfg), - rfr_ctrl = readl(&sdrc_base->cs[CS0].rfr_ctrl); - ctrla = readl(&sdrc_actim_base0->ctrla), - ctrlb = readl(&sdrc_actim_base0->ctrlb); - mr = readl(&sdrc_base->cs[CS0].mr); - write_sdrc_timings(cs, sdrc_actim_base1, mcfg, ctrla, ctrlb, - rfr_ctrl, mr); - + timings.mcfg = readl(&sdrc_base->cs[CS0].mcfg), + timings.rfr_ctrl = readl(&sdrc_base->cs[CS0].rfr_ctrl); + timings.ctrla = readl(&sdrc_actim_base0->ctrla); + timings.ctrlb = readl(&sdrc_actim_base0->ctrlb); + timings.mr = readl(&sdrc_base->cs[CS0].mr); + write_sdrc_timings(cs, sdrc_actim_base1, &timings); } } diff --git a/arch/arm/cpu/armv7/omap4/clocks.c b/arch/arm/cpu/armv7/omap4/clocks.c index 5bd0a88fde..12c58033d2 100644 --- a/arch/arm/cpu/armv7/omap4/clocks.c +++ b/arch/arm/cpu/armv7/omap4/clocks.c @@ -44,7 +44,7 @@ */ #define printf(fmt, args...) #define puts(s) -#endif +#endif /* !CONFIG_SPL_BUILD */ struct omap4_prcm_regs *const prcm = (struct omap4_prcm_regs *)0x4A004100; diff --git a/arch/arm/cpu/armv7/omap4/hwinit.c b/arch/arm/cpu/armv7/omap4/hwinit.c index 2c34e48f42..f4123aaffc 100644 --- a/arch/arm/cpu/armv7/omap4/hwinit.c +++ b/arch/arm/cpu/armv7/omap4/hwinit.c @@ -116,7 +116,7 @@ void do_io_settings(void) if ((omap4_rev < OMAP4460_ES1_0) || !readl(&ctrl->control_efuse_2)) writel(CONTROL_EFUSE_2_OVERRIDE, &ctrl->control_efuse_2); } -#endif +#endif /* CONFIG_SPL_BUILD */ /* dummy fuction for omap4 */ void config_data_eye_leveling_samples(u32 emif_base) @@ -182,4 +182,4 @@ void v7_outer_cache_disable(void) { set_pl310_ctrl_reg(0); } -#endif +#endif /* !CONFIG_SYS_L2CACHE_OFF */ diff --git a/arch/arm/cpu/armv7/s5p-common/Makefile b/arch/arm/cpu/armv7/s5p-common/Makefile index f975f3f06c..17053995bd 100644 --- a/arch/arm/cpu/armv7/s5p-common/Makefile +++ b/arch/arm/cpu/armv7/s5p-common/Makefile @@ -28,7 +28,6 @@ LIB = $(obj)libs5p-common.o COBJS-y += cpu_info.o COBJS-y += timer.o COBJS-y += sromc.o -COBJS-y += wdt.o COBJS-$(CONFIG_PWM) += pwm.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) diff --git a/arch/arm/cpu/armv7/s5p-common/wdt.c b/arch/arm/cpu/armv7/s5p-common/wdt.c deleted file mode 100644 index 94acc1e4ba..0000000000 --- a/arch/arm/cpu/armv7/s5p-common/wdt.c +++ /dev/null @@ -1,59 +0,0 @@ -/* - * Copyright (C) 2012 Samsung Electronics - * Minkyu Kang <mk7.kang@samsung.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/watchdog.h> - -#define PRESCALER_VAL 255 - -void wdt_stop(void) -{ - struct s5p_watchdog *wdt = - (struct s5p_watchdog *)samsung_get_base_watchdog(); - unsigned int wtcon; - - wtcon = readl(&wdt->wtcon); - wtcon &= ~(WTCON_EN | WTCON_INT | WTCON_RESET); - - writel(wtcon, &wdt->wtcon); -} - -void wdt_start(unsigned int timeout) -{ - struct s5p_watchdog *wdt = - (struct s5p_watchdog *)samsung_get_base_watchdog(); - unsigned int wtcon; - - wdt_stop(); - - wtcon = readl(&wdt->wtcon); - wtcon |= (WTCON_EN | WTCON_CLK(WTCON_CLK_128)); - wtcon &= ~WTCON_INT; - wtcon |= WTCON_RESET; - wtcon |= WTCON_PRESCALER(PRESCALER_VAL); - - writel(timeout, &wdt->wtdat); - writel(timeout, &wdt->wtcnt); - writel(wtcon, &wdt->wtcon); -} diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S index 7df97c5a3a..dcc1f831bc 100644 --- a/arch/arm/cpu/armv7/start.S +++ b/arch/arm/cpu/armv7/start.S @@ -155,12 +155,7 @@ reset: bl cpu_init_crit #endif -/* Set stackpointer in internal RAM to call board_init_f */ -call_board_init_f: - ldr sp, =(CONFIG_SYS_INIT_SP_ADDR) - bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ - ldr r0,=0x00000000 - bl board_init_f + bl _main /*------------------------------------------------------------------------------*/ @@ -177,14 +172,10 @@ ENTRY(relocate_code) mov r5, r1 /* save addr of gd */ mov r6, r2 /* save addr of destination */ - /* Set up the stack */ -stack_setup: - mov sp, r4 - adr r0, _start cmp r0, r6 moveq r9, #0 /* no relocation. relocation offset(r9) = 0 */ - beq clear_bss /* skip relocation */ + beq relocate_done /* skip relocation */ mov r1, r6 /* r1 <- scratch for copy_loop */ ldr r3, _image_copy_end_ofs add r2, r0, r3 /* r2 <- source end address */ @@ -233,34 +224,22 @@ fixnext: add r2, r2, #8 /* each rel.dyn entry is 8 bytes */ cmp r2, r3 blo fixloop - b clear_bss + +relocate_done: + + bx lr + _rel_dyn_start_ofs: .word __rel_dyn_start - _start _rel_dyn_end_ofs: .word __rel_dyn_end - _start _dynsym_start_ofs: .word __dynsym_start - _start +ENDPROC(relocate_code) -clear_bss: - ldr r0, _bss_start_ofs - ldr r1, _bss_end_ofs - mov r4, r6 /* reloc addr */ - add r0, r0, r4 - add r1, r1, r4 - mov r2, #0x00000000 /* clear */ - -clbss_l:cmp r0, r1 /* clear loop... */ - bhs clbss_e /* if reached end of bss, exit */ - str r2, [r0] - add r0, r0, #4 - b clbss_l -clbss_e: +#endif -/* - * We are done. Do not return, instead branch to second part of board - * initialization, now running from RAM. - */ -jump_2_ram: +ENTRY(c_runtime_cpu_setup) /* * If I-cache is enabled invalidate it */ @@ -279,20 +258,9 @@ jump_2_ram: mcr p15, 0, r0, c12, c0, 0 @Set VBAR #endif /* !Tegra20 */ - ldr r0, _board_init_r_ofs - adr r1, _start - add lr, r0, r1 - add lr, lr, r9 - /* setup parameters for board_init_r */ - mov r0, r5 /* gd_t */ - mov r1, r6 /* dest_addr */ - /* jump to it ... */ - mov pc, lr - -_board_init_r_ofs: - .word board_init_r - _start -ENDPROC(relocate_code) -#endif + bx lr + +ENDPROC(c_runtime_cpu_setup) /************************************************************************* * diff --git a/arch/arm/cpu/armv7/tegra20/Makefile b/arch/arm/cpu/armv7/tegra20/Makefile index 09a0314d0d..54ed8c48b4 100644 --- a/arch/arm/cpu/armv7/tegra20/Makefile +++ b/arch/arm/cpu/armv7/tegra20/Makefile @@ -28,6 +28,8 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(SOC).o COBJS-$(CONFIG_USB_EHCI_TEGRA) += usb.o +COBJS-$(CONFIG_PWM_TEGRA) += pwm.o +COBJS-$(CONFIG_VIDEO_TEGRA) += display.o COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) diff --git a/arch/arm/cpu/armv7/tegra20/display.c b/arch/arm/cpu/armv7/tegra20/display.c new file mode 100644 index 0000000000..031f9a850a --- /dev/null +++ b/arch/arm/cpu/armv7/tegra20/display.c @@ -0,0 +1,409 @@ +/* + * (C) Copyright 2010 + * NVIDIA Corporation <www.nvidia.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/tegra.h> +#include <asm/arch/display.h> +#include <asm/arch/dc.h> +#include <asm/arch-tegra/clk_rst.h> +#include <asm/arch-tegra/timer.h> + +static struct fdt_disp_config config; + +static void update_window(struct dc_ctlr *dc, struct disp_ctl_win *win) +{ + unsigned h_dda, v_dda; + unsigned long val; + + val = readl(&dc->cmd.disp_win_header); + val |= WINDOW_A_SELECT; + writel(val, &dc->cmd.disp_win_header); + + writel(win->fmt, &dc->win.color_depth); + + clrsetbits_le32(&dc->win.byte_swap, BYTE_SWAP_MASK, + BYTE_SWAP_NOSWAP << BYTE_SWAP_SHIFT); + + val = win->out_x << H_POSITION_SHIFT; + val |= win->out_y << V_POSITION_SHIFT; + writel(val, &dc->win.pos); + + val = win->out_w << H_SIZE_SHIFT; + val |= win->out_h << V_SIZE_SHIFT; + writel(val, &dc->win.size); + + val = (win->w * win->bpp / 8) << H_PRESCALED_SIZE_SHIFT; + val |= win->h << V_PRESCALED_SIZE_SHIFT; + writel(val, &dc->win.prescaled_size); + + writel(0, &dc->win.h_initial_dda); + writel(0, &dc->win.v_initial_dda); + + h_dda = (win->w * 0x1000) / max(win->out_w - 1, 1); + v_dda = (win->h * 0x1000) / max(win->out_h - 1, 1); + + val = h_dda << H_DDA_INC_SHIFT; + val |= v_dda << V_DDA_INC_SHIFT; + writel(val, &dc->win.dda_increment); + + writel(win->stride, &dc->win.line_stride); + writel(0, &dc->win.buf_stride); + + val = WIN_ENABLE; + if (win->bpp < 24) + val |= COLOR_EXPAND; + writel(val, &dc->win.win_opt); + + writel((unsigned long)win->phys_addr, &dc->winbuf.start_addr); + writel(win->x, &dc->winbuf.addr_h_offset); + writel(win->y, &dc->winbuf.addr_v_offset); + + writel(0xff00, &dc->win.blend_nokey); + writel(0xff00, &dc->win.blend_1win); + + val = GENERAL_ACT_REQ | WIN_A_ACT_REQ; + val |= GENERAL_UPDATE | WIN_A_UPDATE; + writel(val, &dc->cmd.state_ctrl); +} + +static void write_pair(struct fdt_disp_config *config, int item, u32 *reg) +{ + writel(config->horiz_timing[item] | + (config->vert_timing[item] << 16), reg); +} + +static int update_display_mode(struct dc_disp_reg *disp, + struct fdt_disp_config *config) +{ + unsigned long val; + unsigned long rate; + unsigned long div; + + writel(0x0, &disp->disp_timing_opt); + write_pair(config, FDT_LCD_TIMING_REF_TO_SYNC, &disp->ref_to_sync); + write_pair(config, FDT_LCD_TIMING_SYNC_WIDTH, &disp->sync_width); + write_pair(config, FDT_LCD_TIMING_BACK_PORCH, &disp->back_porch); + write_pair(config, FDT_LCD_TIMING_FRONT_PORCH, &disp->front_porch); + + writel(config->width | (config->height << 16), &disp->disp_active); + + val = DE_SELECT_ACTIVE << DE_SELECT_SHIFT; + val |= DE_CONTROL_NORMAL << DE_CONTROL_SHIFT; + writel(val, &disp->data_enable_opt); + + val = DATA_FORMAT_DF1P1C << DATA_FORMAT_SHIFT; + val |= DATA_ALIGNMENT_MSB << DATA_ALIGNMENT_SHIFT; + val |= DATA_ORDER_RED_BLUE << DATA_ORDER_SHIFT; + writel(val, &disp->disp_interface_ctrl); + + /* + * The pixel clock divider is in 7.1 format (where the bottom bit + * represents 0.5). Here we calculate the divider needed to get from + * the display clock (typically 600MHz) to the pixel clock. We round + * up or down as requried. + */ + rate = clock_get_periph_rate(PERIPH_ID_DISP1, CLOCK_ID_CGENERAL); + div = ((rate * 2 + config->pixel_clock / 2) / config->pixel_clock) - 2; + debug("Display clock %lu, divider %lu\n", rate, div); + + writel(0x00010001, &disp->shift_clk_opt); + + val = PIXEL_CLK_DIVIDER_PCD1 << PIXEL_CLK_DIVIDER_SHIFT; + val |= div << SHIFT_CLK_DIVIDER_SHIFT; + writel(val, &disp->disp_clk_ctrl); + + return 0; +} + +/* Start up the display and turn on power to PWMs */ +static void basic_init(struct dc_cmd_reg *cmd) +{ + u32 val; + + writel(0x00000100, &cmd->gen_incr_syncpt_ctrl); + writel(0x0000011a, &cmd->cont_syncpt_vsync); + writel(0x00000000, &cmd->int_type); + writel(0x00000000, &cmd->int_polarity); + writel(0x00000000, &cmd->int_mask); + writel(0x00000000, &cmd->int_enb); + + val = PW0_ENABLE | PW1_ENABLE | PW2_ENABLE; + val |= PW3_ENABLE | PW4_ENABLE | PM0_ENABLE; + val |= PM1_ENABLE; + writel(val, &cmd->disp_pow_ctrl); + + val = readl(&cmd->disp_cmd); + val |= CTRL_MODE_C_DISPLAY << CTRL_MODE_SHIFT; + writel(val, &cmd->disp_cmd); +} + +static void basic_init_timer(struct dc_disp_reg *disp) +{ + writel(0x00000020, &disp->mem_high_pri); + writel(0x00000001, &disp->mem_high_pri_timer); +} + +static const u32 rgb_enb_tab[PIN_REG_COUNT] = { + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, +}; + +static const u32 rgb_polarity_tab[PIN_REG_COUNT] = { + 0x00000000, + 0x01000000, + 0x00000000, + 0x00000000, +}; + +static const u32 rgb_data_tab[PIN_REG_COUNT] = { + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, +}; + +static const u32 rgb_sel_tab[PIN_OUTPUT_SEL_COUNT] = { + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, + 0x00210222, + 0x00002200, + 0x00020000, +}; + +static void rgb_enable(struct dc_com_reg *com) +{ + int i; + + for (i = 0; i < PIN_REG_COUNT; i++) { + writel(rgb_enb_tab[i], &com->pin_output_enb[i]); + writel(rgb_polarity_tab[i], &com->pin_output_polarity[i]); + writel(rgb_data_tab[i], &com->pin_output_data[i]); + } + + for (i = 0; i < PIN_OUTPUT_SEL_COUNT; i++) + writel(rgb_sel_tab[i], &com->pin_output_sel[i]); +} + +int setup_window(struct disp_ctl_win *win, struct fdt_disp_config *config) +{ + win->x = 0; + win->y = 0; + win->w = config->width; + win->h = config->height; + win->out_x = 0; + win->out_y = 0; + win->out_w = config->width; + win->out_h = config->height; + win->phys_addr = config->frame_buffer; + win->stride = config->width * (1 << config->log2_bpp) / 8; + debug("%s: depth = %d\n", __func__, config->log2_bpp); + switch (config->log2_bpp) { + case 5: + case 24: + win->fmt = COLOR_DEPTH_R8G8B8A8; + win->bpp = 32; + break; + case 4: + win->fmt = COLOR_DEPTH_B5G6R5; + win->bpp = 16; + break; + + default: + debug("Unsupported LCD bit depth"); + return -1; + } + + return 0; +} + +struct fdt_disp_config *tegra_display_get_config(void) +{ + return config.valid ? &config : NULL; +} + +static void debug_timing(const char *name, unsigned int timing[]) +{ +#ifdef DEBUG + int i; + + debug("%s timing: ", name); + for (i = 0; i < FDT_LCD_TIMING_COUNT; i++) + debug("%d ", timing[i]); + debug("\n"); +#endif +} + +/** + * Decode panel information from the fdt, according to a standard binding + * + * @param blob fdt blob + * @param node offset of fdt node to read from + * @param config structure to store fdt config into + * @return 0 if ok, -ve on error + */ +static int tegra_decode_panel(const void *blob, int node, + struct fdt_disp_config *config) +{ + int front, back, ref; + + config->width = fdtdec_get_int(blob, node, "xres", -1); + config->height = fdtdec_get_int(blob, node, "yres", -1); + config->pixel_clock = fdtdec_get_int(blob, node, "clock", 0); + if (!config->pixel_clock || config->width == -1 || + config->height == -1) { + debug("%s: Pixel parameters missing\n", __func__); + return -FDT_ERR_NOTFOUND; + } + + back = fdtdec_get_int(blob, node, "left-margin", -1); + front = fdtdec_get_int(blob, node, "right-margin", -1); + ref = fdtdec_get_int(blob, node, "hsync-len", -1); + if ((back | front | ref) == -1) { + debug("%s: Horizontal parameters missing\n", __func__); + return -FDT_ERR_NOTFOUND; + } + + /* Use a ref-to-sync of 1 always, and take this from the front porch */ + config->horiz_timing[FDT_LCD_TIMING_REF_TO_SYNC] = 1; + config->horiz_timing[FDT_LCD_TIMING_SYNC_WIDTH] = ref; + config->horiz_timing[FDT_LCD_TIMING_BACK_PORCH] = back; + config->horiz_timing[FDT_LCD_TIMING_FRONT_PORCH] = front - + config->horiz_timing[FDT_LCD_TIMING_REF_TO_SYNC]; + debug_timing("horiz", config->horiz_timing); + + back = fdtdec_get_int(blob, node, "upper-margin", -1); + front = fdtdec_get_int(blob, node, "lower-margin", -1); + ref = fdtdec_get_int(blob, node, "vsync-len", -1); + if ((back | front | ref) == -1) { + debug("%s: Vertical parameters missing\n", __func__); + return -FDT_ERR_NOTFOUND; + } + + config->vert_timing[FDT_LCD_TIMING_REF_TO_SYNC] = 1; + config->vert_timing[FDT_LCD_TIMING_SYNC_WIDTH] = ref; + config->vert_timing[FDT_LCD_TIMING_BACK_PORCH] = back; + config->vert_timing[FDT_LCD_TIMING_FRONT_PORCH] = front - + config->vert_timing[FDT_LCD_TIMING_REF_TO_SYNC]; + debug_timing("vert", config->vert_timing); + + return 0; +} + +/** + * Decode the display controller information from the fdt. + * + * @param blob fdt blob + * @param config structure to store fdt config into + * @return 0 if ok, -ve on error + */ +static int tegra_display_decode_config(const void *blob, + struct fdt_disp_config *config) +{ + int node, rgb; + int bpp, bit; + + /* TODO: Support multiple controllers */ + node = fdtdec_next_compatible(blob, 0, COMPAT_NVIDIA_TEGRA20_DC); + if (node < 0) { + debug("%s: Cannot find display controller node in fdt\n", + __func__); + return node; + } + config->disp = (struct disp_ctlr *)fdtdec_get_addr(blob, node, "reg"); + if (!config->disp) { + debug("%s: No display controller address\n", __func__); + return -1; + } + + rgb = fdt_subnode_offset(blob, node, "rgb"); + + config->panel_node = fdtdec_lookup_phandle(blob, rgb, "nvidia,panel"); + if (!config->panel_node < 0) { + debug("%s: Cannot find panel information\n", __func__); + return -1; + } + + if (tegra_decode_panel(blob, config->panel_node, config)) { + debug("%s: Failed to decode panel information\n", __func__); + return -1; + } + + bpp = fdtdec_get_int(blob, config->panel_node, "nvidia,bits-per-pixel", + -1); + bit = ffs(bpp) - 1; + if (bpp == (1 << bit)) + config->log2_bpp = bit; + else + config->log2_bpp = bpp; + if (bpp == -1) { + debug("%s: Pixel bpp parameters missing\n", __func__); + return -FDT_ERR_NOTFOUND; + } + config->bpp = bpp; + + config->valid = 1; /* we have a valid configuration */ + + return 0; +} + +int tegra_display_probe(const void *blob, void *default_lcd_base) +{ + struct disp_ctl_win window; + struct dc_ctlr *dc; + + if (tegra_display_decode_config(blob, &config)) + return -1; + + config.frame_buffer = (u32)default_lcd_base; + + dc = (struct dc_ctlr *)config.disp; + + /* + * A header file for clock constants was NAKed upstream. + * TODO: Put this into the FDT and fdt_lcd struct when we have clock + * support there + */ + clock_start_periph_pll(PERIPH_ID_HOST1X, CLOCK_ID_PERIPH, + 144 * 1000000); + clock_start_periph_pll(PERIPH_ID_DISP1, CLOCK_ID_CGENERAL, + 600 * 1000000); + basic_init(&dc->cmd); + basic_init_timer(&dc->disp); + rgb_enable(&dc->com); + + if (config.pixel_clock) + update_display_mode(&dc->disp, &config); + + if (setup_window(&window, &config)) + return -1; + + update_window(dc, &window); + + return 0; +} diff --git a/arch/arm/cpu/armv7/tegra20/pwm.c b/arch/arm/cpu/armv7/tegra20/pwm.c new file mode 100644 index 0000000000..b655c5cd06 --- /dev/null +++ b/arch/arm/cpu/armv7/tegra20/pwm.c @@ -0,0 +1,101 @@ +/* + * Tegra2 pulse width frequency modulator definitions + * + * Copyright (c) 2011 The Chromium OS Authors. + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <fdtdec.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/pwm.h> + +struct pwm_info { + struct pwm_ctlr *pwm; /* Registers for our pwm controller */ + int pwm_node; /* PWM device tree node */ +} local; + +void pwm_enable(unsigned channel, int rate, int pulse_width, int freq_divider) +{ + u32 reg; + + assert(channel < PWM_NUM_CHANNELS); + + /* TODO: Can we use clock_adjust_periph_pll_div() here? */ + clock_start_periph_pll(PERIPH_ID_PWM, CLOCK_ID_SFROM32KHZ, rate); + + reg = PWM_ENABLE_MASK; + reg |= pulse_width << PWM_WIDTH_SHIFT; + reg |= freq_divider << PWM_DIVIDER_SHIFT; + writel(reg, &local.pwm[channel].control); + debug("%s: channel=%d, rate=%d\n", __func__, channel, rate); +} + +int pwm_request(const void *blob, int node, const char *prop_name) +{ + int pwm_node; + u32 data[3]; + + if (fdtdec_get_int_array(blob, node, prop_name, data, + ARRAY_SIZE(data))) { + debug("%s: Cannot decode PWM property '%s'\n", __func__, + prop_name); + return -1; + } + + pwm_node = fdt_node_offset_by_phandle(blob, data[0]); + if (pwm_node != local.pwm_node) { + debug("%s: PWM property '%s' phandle %d not recognised" + "- expecting %d\n", __func__, prop_name, data[0], + local.pwm_node); + return -1; + } + if (data[1] >= PWM_NUM_CHANNELS) { + debug("%s: PWM property '%s': invalid channel %u\n", __func__, + prop_name, data[1]); + return -1; + } + + /* + * TODO: We could maintain a list of requests, but it might not be + * worth it for U-Boot. + */ + return data[1]; +} + +int pwm_init(const void *blob) +{ + local.pwm_node = fdtdec_next_compatible(blob, 0, + COMPAT_NVIDIA_TEGRA20_PWM); + if (local.pwm_node < 0) { + debug("%s: Cannot find device tree node\n", __func__); + return -1; + } + + local.pwm = (struct pwm_ctlr *)fdtdec_get_addr(blob, local.pwm_node, + "reg"); + if (local.pwm == (struct pwm_ctlr *)FDT_ADDR_T_NONE) { + debug("%s: Cannot find pwm reg address\n", __func__); + return -1; + } + debug("Tegra PWM at %p, node %d\n", local.pwm, local.pwm_node); + + return 0; +} diff --git a/arch/arm/cpu/ixp/start.S b/arch/arm/cpu/ixp/start.S index c12f1a7db8..efb5a400cf 100644 --- a/arch/arm/cpu/ixp/start.S +++ b/arch/arm/cpu/ixp/start.S @@ -245,12 +245,7 @@ reset: orr r0,r0,#0x13 msr cpsr,r0 -/* Set initial stackpointer in SDRAM to call board_init_f */ -call_board_init_f: - ldr sp, =(CONFIG_SYS_INIT_SP_ADDR) - bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ - ldr r0,=0x00000000 - bl board_init_f + bl _main /*------------------------------------------------------------------------------*/ @@ -267,14 +262,10 @@ relocate_code: mov r5, r1 /* save addr of gd */ mov r6, r2 /* save addr of destination */ - /* Set up the stack */ -stack_setup: - mov sp, r4 - adr r0, _start cmp r0, r6 moveq r9, #0 /* no relocation. relocation offset(r9) = 0 */ - beq clear_bss /* skip relocation */ + beq relocate_done /* skip relocation */ mov r1, r6 /* r1 <- scratch for copy_loop */ ldr r3, _bss_start_ofs add r2, r0, r3 /* r2 <- source end address */ @@ -326,42 +317,9 @@ fixnext: blo fixloop #endif -clear_bss: -#ifndef CONFIG_SPL_BUILD - ldr r0, _bss_start_ofs - ldr r1, _bss_end_ofs - mov r4, r6 /* reloc addr */ - add r0, r0, r4 - add r1, r1, r4 - mov r2, #0x00000000 /* clear */ - -clbss_l:cmp r0, r1 /* clear loop... */ - bhs clbss_e /* if reached end of bss, exit */ - str r2, [r0] - add r0, r0, #4 - b clbss_l -clbss_e: - - bl coloured_LED_init - bl red_led_on -#endif +relocate_done: -/* - * We are done. Do not return, instead branch to second part of board - * initialization, now running from RAM. - */ - ldr r0, _board_init_r_ofs - adr r1, _start - add lr, r0, r1 - add lr, lr, r9 - /* setup parameters for board_init_r */ - mov r0, r5 /* gd_t */ - mov r1, r6 /* dest_addr */ - /* jump to it ... */ - mov pc, lr - -_board_init_r_ofs: - .word board_init_r - _start + bx lr _rel_dyn_start_ofs: .word __rel_dyn_start - _start @@ -370,6 +328,11 @@ _rel_dyn_end_ofs: _dynsym_start_ofs: .word __dynsym_start - _start + .globl c_runtime_cpu_setup +c_runtime_cpu_setup: + + bx lr + /****************************************************************************/ /* */ /* Interrupt handling */ diff --git a/arch/arm/cpu/pxa/start.S b/arch/arm/cpu/pxa/start.S index 536cf5c974..e71803eb2e 100644 --- a/arch/arm/cpu/pxa/start.S +++ b/arch/arm/cpu/pxa/start.S @@ -164,12 +164,7 @@ reset: bl lock_cache_for_stack #endif -/* Set stackpointer in internal RAM to call board_init_f */ -call_board_init_f: - ldr sp, =(CONFIG_SYS_INIT_SP_ADDR) - bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ - ldr r0, =0x00000000 - bl board_init_f + bl _main /*------------------------------------------------------------------------------*/ #ifndef CONFIG_SPL_BUILD @@ -186,19 +181,17 @@ relocate_code: mov r5, r1 /* save addr of gd */ mov r6, r2 /* save addr of destination */ - /* Set up the stack */ -stack_setup: - mov sp, r4 - /* Disable the Dcache RAM lock for stack now */ #ifdef CONFIG_CPU_PXA25X + mov r12, lr bl cpu_init_crit + mov lr, r12 #endif adr r0, _start cmp r0, r6 moveq r9, #0 /* no relocation. relocation offset(r9) = 0 */ - beq clear_bss /* skip relocation */ + beq relocate_done /* skip relocation */ mov r1, r6 /* r1 <- scratch for copy_loop */ ldr r3, _bss_start_ofs add r2, r0, r3 /* r2 <- source end address */ @@ -250,48 +243,9 @@ fixnext: blo fixloop #endif -clear_bss: -#ifndef CONFIG_SPL_BUILD - ldr r0, _bss_start_ofs - ldr r1, _bss_end_ofs - mov r4, r6 /* reloc addr */ - add r0, r0, r4 - add r1, r1, r4 - mov r2, #0x00000000 /* clear */ - -clbss_l:cmp r0, r1 /* clear loop... */ - bhs clbss_e /* if reached end of bss, exit */ - str r2, [r0] - add r0, r0, #4 - b clbss_l -clbss_e: -#endif /* #ifndef CONFIG_SPL_BUILD */ +relocate_done: -/* - * We are done. Do not return, instead branch to second part of board - * initialization, now running from RAM. - */ -#ifdef CONFIG_ONENAND_SPL - ldr r0, _onenand_boot_ofs - mov pc, r0 - -_onenand_boot_ofs: - .word onenand_boot -#else -jump_2_ram: - ldr r0, _board_init_r_ofs - ldr r1, _TEXT_BASE - add lr, r0, r1 - add lr, lr, r9 - /* setup parameters for board_init_r */ - mov r0, r5 /* gd_t */ - mov r1, r6 /* dest_addr */ - /* jump to it ... */ - mov pc, lr - -_board_init_r_ofs: - .word board_init_r - _start -#endif + bx lr _rel_dyn_start_ofs: .word __rel_dyn_start - _start @@ -299,7 +253,14 @@ _rel_dyn_end_ofs: .word __rel_dyn_end - _start _dynsym_start_ofs: .word __dynsym_start - _start + #endif + + .globl c_runtime_cpu_setup +c_runtime_cpu_setup: + + bx lr + /* ************************************************************************* * diff --git a/arch/arm/cpu/s3c44b0/start.S b/arch/arm/cpu/s3c44b0/start.S index 323b923f13..4528c91983 100644 --- a/arch/arm/cpu/s3c44b0/start.S +++ b/arch/arm/cpu/s3c44b0/start.S @@ -128,12 +128,7 @@ reset: bl lowlevel_init #endif -/* Set stackpointer in internal RAM to call board_init_f */ -call_board_init_f: - ldr sp, =(CONFIG_SYS_INIT_SP_ADDR) - bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ - ldr r0,=0x00000000 - bl board_init_f + bl _main /*------------------------------------------------------------------------------*/ @@ -150,14 +145,10 @@ relocate_code: mov r5, r1 /* save addr of gd */ mov r6, r2 /* save addr of destination */ - /* Set up the stack */ -stack_setup: - mov sp, r4 - adr r0, _start cmp r0, r6 moveq r9, #0 /* no relocation. relocation offset(r9) = 0 */ - beq clear_bss /* skip relocation */ + beq relocate_done /* skip relocation */ mov r1, r6 /* r1 <- scratch for copy_loop */ ldr r3, _bss_start_ofs add r2, r0, r3 /* r2 <- source end address */ @@ -209,42 +200,9 @@ fixnext: blo fixloop #endif -clear_bss: -#ifndef CONFIG_SPL_BUILD - ldr r0, _bss_start_ofs - ldr r1, _bss_end_ofs - mov r4, r6 /* reloc addr */ - add r0, r0, r4 - add r1, r1, r4 - mov r2, #0x00000000 /* clear */ - -clbss_l:cmp r0, r1 /* clear loop... */ - bhs clbss_e /* if reached end of bss, exit */ - str r2, [r0] - add r0, r0, #4 - b clbss_l -clbss_e: - - bl coloured_LED_init - bl red_led_on -#endif +relocate_done: -/* - * We are done. Do not return, instead branch to second part of board - * initialization, now running from RAM. - */ - ldr r0, _board_init_r_ofs - adr r1, _start - add lr, r0, r1 - add lr, lr, r9 - /* setup parameters for board_init_r */ - mov r0, r5 /* gd_t */ - mov r1, r6 /* dest_addr */ - /* jump to it ... */ - mov pc, lr - -_board_init_r_ofs: - .word board_init_r - _start + bx lr _rel_dyn_start_ofs: .word __rel_dyn_start - _start @@ -253,6 +211,11 @@ _rel_dyn_end_ofs: _dynsym_start_ofs: .word __dynsym_start - _start + .globl c_runtime_cpu_setup +c_runtime_cpu_setup: + + bx lr + /* ************************************************************************* * diff --git a/arch/arm/cpu/sa1100/start.S b/arch/arm/cpu/sa1100/start.S index 1ea92d1456..3144299afe 100644 --- a/arch/arm/cpu/sa1100/start.S +++ b/arch/arm/cpu/sa1100/start.S @@ -132,12 +132,7 @@ reset: bl cpu_init_crit #endif -/* Set stackpointer in internal RAM to call board_init_f */ -call_board_init_f: - ldr sp, =(CONFIG_SYS_INIT_SP_ADDR) - bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ - ldr r0,=0x00000000 - bl board_init_f + bl _main /*------------------------------------------------------------------------------*/ @@ -154,14 +149,10 @@ relocate_code: mov r5, r1 /* save addr of gd */ mov r6, r2 /* save addr of destination */ - /* Set up the stack */ -stack_setup: - mov sp, r4 - adr r0, _start cmp r0, r6 moveq r9, #0 /* no relocation. relocation offset(r9) = 0 */ - beq clear_bss /* skip relocation */ + beq relocate_done /* skip relocation */ mov r1, r6 /* r1 <- scratch for copy_loop */ ldr r3, _bss_start_ofs add r2, r0, r3 /* r2 <- source end address */ @@ -213,40 +204,10 @@ fixnext: blo fixloop #endif -clear_bss: -#ifndef CONFIG_SPL_BUILD - ldr r0, _bss_start_ofs - ldr r1, _bss_end_ofs - mov r4, r6 /* reloc addr */ - add r0, r0, r4 - add r1, r1, r4 - mov r2, #0x00000000 /* clear */ - -clbss_l:cmp r0, r1 /* clear loop... */ - bhs clbss_e /* if reached end of bss, exit */ - str r2, [r0] - add r0, r0, #4 - b clbss_l -clbss_e: -#endif +relocate_done: -/* - * We are done. Do not return, instead branch to second part of board - * initialization, now running from RAM. - */ - ldr r0, _board_init_r_ofs - adr r1, _start - add lr, r0, r1 - add lr, lr, r9 - /* setup parameters for board_init_r */ - mov r0, r5 /* gd_t */ - mov r1, r6 /* dest_addr */ - /* jump to it ... */ mov pc, lr -_board_init_r_ofs: - .word board_init_r - _start - _rel_dyn_start_ofs: .word __rel_dyn_start - _start _rel_dyn_end_ofs: @@ -254,6 +215,11 @@ _rel_dyn_end_ofs: _dynsym_start_ofs: .word __dynsym_start - _start + .globl c_runtime_cpu_setup +c_runtime_cpu_setup: + + mov pc, lr + /* ************************************************************************* * diff --git a/arch/arm/cpu/tegra20-common/funcmux.c b/arch/arm/cpu/tegra20-common/funcmux.c index 00b8029eba..ece7ad9ec9 100644 --- a/arch/arm/cpu/tegra20-common/funcmux.c +++ b/arch/arm/cpu/tegra20-common/funcmux.c @@ -25,6 +25,30 @@ #include <asm/arch/funcmux.h> #include <asm/arch/pinmux.h> +/* + * The PINMUX macro is used to set up pinmux tables. + */ +#define PINMUX(grp, mux, pupd, tri) \ + {PINGRP_##grp, PMUX_FUNC_##mux, PMUX_PULL_##pupd, PMUX_TRI_##tri} + +static const struct pingroup_config disp1_default[] = { + PINMUX(LDI, DISPA, NORMAL, NORMAL), + PINMUX(LHP0, DISPA, NORMAL, NORMAL), + PINMUX(LHP1, DISPA, NORMAL, NORMAL), + PINMUX(LHP2, DISPA, NORMAL, NORMAL), + PINMUX(LHS, DISPA, NORMAL, NORMAL), + PINMUX(LM0, RSVD4, NORMAL, NORMAL), + PINMUX(LPP, DISPA, NORMAL, NORMAL), + PINMUX(LPW0, DISPA, NORMAL, NORMAL), + PINMUX(LPW2, DISPA, NORMAL, NORMAL), + PINMUX(LSC0, DISPA, NORMAL, NORMAL), + PINMUX(LSPI, DISPA, NORMAL, NORMAL), + PINMUX(LVP1, DISPA, NORMAL, NORMAL), + PINMUX(LVS, DISPA, NORMAL, NORMAL), + PINMUX(SLXD, SPDIF, NORMAL, NORMAL), +}; + + int funcmux_select(enum periph_id id, int config) { int bad_config = config != FUNCMUX_DEFAULT; @@ -257,6 +281,19 @@ int funcmux_select(enum periph_id id, int config) break; } break; + case PERIPH_ID_DISP1: + if (config == FUNCMUX_DEFAULT) { + int i; + + for (i = PINGRP_LD0; i <= PINGRP_LD17; i++) { + pinmux_set_func(i, PMUX_FUNC_DISPA); + pinmux_tristate_disable(i); + pinmux_set_pullupdown(i, PMUX_PULL_NORMAL); + } + pinmux_config_table(disp1_default, + ARRAY_SIZE(disp1_default)); + } + break; default: debug("%s: invalid periph_id %d", __func__, id); diff --git a/arch/arm/cpu/tegra20-common/pinmux.c b/arch/arm/cpu/tegra20-common/pinmux.c index 08b83055db..a2a09169e5 100644 --- a/arch/arm/cpu/tegra20-common/pinmux.c +++ b/arch/arm/cpu/tegra20-common/pinmux.c @@ -554,7 +554,7 @@ void pinmux_set_func(enum pmux_pingrp pin, enum pmux_func func) writel(reg, muxctl); } -void pinmux_config_pingroup(struct pingroup_config *config) +void pinmux_config_pingroup(const struct pingroup_config *config) { enum pmux_pingrp pin = config->pingroup; @@ -563,7 +563,7 @@ void pinmux_config_pingroup(struct pingroup_config *config) pinmux_set_tristate(pin, config->tristate); } -void pinmux_config_table(struct pingroup_config *config, int len) +void pinmux_config_table(const struct pingroup_config *config, int len) { int i; diff --git a/arch/arm/dts/exynos5250.dtsi b/arch/arm/dts/exynos5250.dtsi new file mode 100644 index 0000000000..ed8c8dd606 --- /dev/null +++ b/arch/arm/dts/exynos5250.dtsi @@ -0,0 +1,154 @@ +/* + * SAMSUNG EXYNOS5250 SoC device tree source + * + * Copyright (c) 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * SAMSUNG EXYNOS5250 SoC device nodes are listed in this file. + * EXYNOS5250 based board files can include this file and provide + * values for board specfic bindings. + * + * Note: This file does not include device nodes for all the controllers in + * EXYNOS5250 SoC. As device tree coverage for EXYNOS5250 increases, + * additional nodes can be added to this file. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/include/ "skeleton.dtsi" + +/ { + compatible = "samsung,exynos5250"; + + sromc@12250000 { + compatible = "samsung,exynos-sromc"; + reg = <0x12250000 0x20>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c@12c60000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + reg = <0x12C60000 0x100>; + interrupts = <0 56 0>; + }; + + i2c@12c70000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + reg = <0x12C70000 0x100>; + interrupts = <0 57 0>; + }; + + i2c@12c80000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + reg = <0x12C80000 0x100>; + interrupts = <0 58 0>; + }; + + i2c@12c90000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + reg = <0x12C90000 0x100>; + interrupts = <0 59 0>; + }; + + i2c@12ca0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + reg = <0x12CA0000 0x100>; + interrupts = <0 60 0>; + }; + + i2c@12cb0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + reg = <0x12CB0000 0x100>; + interrupts = <0 61 0>; + }; + + i2c@12cc0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + reg = <0x12CC0000 0x100>; + interrupts = <0 62 0>; + }; + + i2c@12cd0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + reg = <0x12CD0000 0x100>; + interrupts = <0 63 0>; + }; + + sound@12d60000 { + compatible = "samsung,exynos-sound"; + reg = <0x12d60000 0x20>; + }; + + spi@12d20000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,exynos-spi"; + reg = <0x12d20000 0x30>; + interrupts = <0 68 0>; + }; + + spi@12d30000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,exynos-spi"; + reg = <0x12d30000 0x30>; + interrupts = <0 69 0>; + }; + + spi@12d40000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,exynos-spi"; + reg = <0x12d40000 0x30>; + clock-frequency = <50000000>; + interrupts = <0 70 0>; + }; + + spi@131a0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,exynos-spi"; + reg = <0x131a0000 0x30>; + interrupts = <0 129 0>; + }; + + spi@131b0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,exynos-spi"; + reg = <0x131b0000 0x30>; + interrupts = <0 130 0>; + }; + + ehci@12110000 { + compatible = "samsung,exynos-ehci"; + reg = <0x12110000 0x100>; + #address-cells = <1>; + #size-cells = <1>; + + phy { + compatible = "samsung,exynos-usb-phy"; + reg = <0x12130000 0x100>; + }; + }; + +}; diff --git a/arch/arm/dts/tegra20.dtsi b/arch/arm/dts/tegra20.dtsi index d936b1e7e6..636ec2c1fe 100644 --- a/arch/arm/dts/tegra20.dtsi +++ b/arch/arm/dts/tegra20.dtsi @@ -211,4 +211,109 @@ compatible = "nvidia,tegra20-nand"; reg = <0x70008000 0x100>; }; + + pwm: pwm@7000a000 { + compatible = "nvidia,tegra20-pwm"; + reg = <0x7000a000 0x100>; + #pwm-cells = <2>; + }; + + host1x { + compatible = "nvidia,tegra20-host1x", "simple-bus"; + reg = <0x50000000 0x00024000>; + interrupts = <0 65 0x04 /* mpcore syncpt */ + 0 67 0x04>; /* mpcore general */ + status = "disabled"; + + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0x54000000 0x54000000 0x04000000>; + + /* video-encoding/decoding */ + mpe { + reg = <0x54040000 0x00040000>; + interrupts = <0 68 0x04>; + status = "disabled"; + }; + + /* video input */ + vi { + reg = <0x54080000 0x00040000>; + interrupts = <0 69 0x04>; + status = "disabled"; + }; + + /* EPP */ + epp { + reg = <0x540c0000 0x00040000>; + interrupts = <0 70 0x04>; + status = "disabled"; + }; + + /* ISP */ + isp { + reg = <0x54100000 0x00040000>; + interrupts = <0 71 0x04>; + status = "disabled"; + }; + + /* 2D engine */ + gr2d { + reg = <0x54140000 0x00040000>; + interrupts = <0 72 0x04>; + status = "disabled"; + }; + + /* 3D engine */ + gr3d { + reg = <0x54180000 0x00040000>; + status = "disabled"; + }; + + /* display controllers */ + dc@54200000 { + compatible = "nvidia,tegra20-dc"; + reg = <0x54200000 0x00040000>; + interrupts = <0 73 0x04>; + status = "disabled"; + + rgb { + status = "disabled"; + }; + }; + + dc@54240000 { + compatible = "nvidia,tegra20-dc"; + reg = <0x54240000 0x00040000>; + interrupts = <0 74 0x04>; + status = "disabled"; + + rgb { + status = "disabled"; + }; + }; + + /* outputs */ + hdmi { + compatible = "nvidia,tegra20-hdmi"; + reg = <0x54280000 0x00040000>; + interrupts = <0 75 0x04>; + status = "disabled"; + }; + + tvo { + compatible = "nvidia,tegra20-tvo"; + reg = <0x542c0000 0x00040000>; + interrupts = <0 76 0x04>; + status = "disabled"; + }; + + dsi { + compatible = "nvidia,tegra20-dsi"; + reg = <0x54300000 0x00040000>; + status = "disabled"; + }; + }; + }; diff --git a/arch/arm/imx-common/cpu.c b/arch/arm/imx-common/cpu.c index a10d12d97d..a9b86c1173 100644 --- a/arch/arm/imx-common/cpu.c +++ b/arch/arm/imx-common/cpu.c @@ -65,20 +65,72 @@ char *get_reset_cause(void) } } +#if defined(CONFIG_MX53) || defined(CONFIG_MX6) +#if defined(CONFIG_MX53) +#define MEMCTL_BASE ESDCTL_BASE_ADDR; +#else +#define MEMCTL_BASE MMDC_P0_BASE_ADDR; +#endif +static const unsigned char col_lookup[] = {9, 10, 11, 8, 12, 9, 9, 9}; +static const unsigned char bank_lookup[] = {3, 2}; + +struct esd_mmdc_regs { + uint32_t ctl; + uint32_t pdc; + uint32_t otc; + uint32_t cfg0; + uint32_t cfg1; + uint32_t cfg2; + uint32_t misc; + uint32_t scr; + uint32_t ref; + uint32_t rsvd1; + uint32_t rsvd2; + uint32_t rwd; + uint32_t or; + uint32_t mrr; + uint32_t cfg3lp; + uint32_t mr4; +}; + +#define ESD_MMDC_CTL_GET_ROW(mdctl) ((ctl >> 24) & 7) +#define ESD_MMDC_CTL_GET_COLUMN(mdctl) ((ctl >> 20) & 7) +#define ESD_MMDC_CTL_GET_WIDTH(mdctl) ((ctl >> 16) & 3) +#define ESD_MMDC_CTL_GET_CS1(mdctl) ((ctl >> 30) & 1) +#define ESD_MMDC_MISC_GET_BANK(mdmisc) ((misc >> 5) & 1) + +unsigned imx_ddr_size(void) +{ + struct esd_mmdc_regs *mem = (struct esd_mmdc_regs *)MEMCTL_BASE; + unsigned ctl = readl(&mem->ctl); + unsigned misc = readl(&mem->misc); + int bits = 11 + 0 + 0 + 1; /* row + col + bank + width */ + + bits += ESD_MMDC_CTL_GET_ROW(ctl); + bits += col_lookup[ESD_MMDC_CTL_GET_COLUMN(ctl)]; + bits += bank_lookup[ESD_MMDC_MISC_GET_BANK(misc)]; + bits += ESD_MMDC_CTL_GET_WIDTH(ctl); + bits += ESD_MMDC_CTL_GET_CS1(ctl); + return 1 << bits; +} +#endif + #if defined(CONFIG_DISPLAY_CPUINFO) -static const char *get_imx_type(u32 imxtype) +const char *get_imx_type(u32 imxtype) { switch (imxtype) { - case 0x63: + case MXC_CPU_MX6Q: return "6Q"; /* Quad-core version of the mx6 */ - case 0x61: - return "6DS"; /* Dual/Solo version of the mx6 */ - case 0x60: + case MXC_CPU_MX6DL: + return "6DL"; /* Dual Lite version of the mx6 */ + case MXC_CPU_MX6SOLO: + return "6SOLO"; /* Solo version of the mx6 */ + case MXC_CPU_MX6SL: return "6SL"; /* Solo-Lite version of the mx6 */ - case 0x51: + case MXC_CPU_MX51: return "51"; - case 0x53: + case MXC_CPU_MX53: return "53"; default: return "??"; @@ -123,11 +175,6 @@ int cpu_mmc_init(bd_t *bis) } #endif -void reset_cpu(ulong addr) -{ - __raw_writew(4, WDOG1_BASE_ADDR); -} - u32 get_ahb_clk(void) { struct mxc_ccm_reg *imx_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; diff --git a/arch/arm/include/asm/arch-am33xx/cpu.h b/arch/arm/include/asm/arch-am33xx/cpu.h index d6c038e3ae..16e8a80700 100644 --- a/arch/arm/include/asm/arch-am33xx/cpu.h +++ b/arch/arm/include/asm/arch-am33xx/cpu.h @@ -60,6 +60,59 @@ #ifndef __KERNEL_STRICT_NAMES #ifndef __ASSEMBLY__ +struct gpmc_cs { + u32 config1; /* 0x00 */ + u32 config2; /* 0x04 */ + u32 config3; /* 0x08 */ + u32 config4; /* 0x0C */ + u32 config5; /* 0x10 */ + u32 config6; /* 0x14 */ + u32 config7; /* 0x18 */ + u32 nand_cmd; /* 0x1C */ + u32 nand_adr; /* 0x20 */ + u32 nand_dat; /* 0x24 */ + u8 res[8]; /* blow up to 0x30 byte */ +}; + +struct bch_res_0_3 { + u32 bch_result_x[4]; +}; + +struct gpmc { + u8 res1[0x10]; + u32 sysconfig; /* 0x10 */ + u8 res2[0x4]; + u32 irqstatus; /* 0x18 */ + u32 irqenable; /* 0x1C */ + u8 res3[0x20]; + u32 timeout_control; /* 0x40 */ + u8 res4[0xC]; + u32 config; /* 0x50 */ + u32 status; /* 0x54 */ + u8 res5[0x8]; /* 0x58 */ + struct gpmc_cs cs[8]; /* 0x60, 0x90, .. */ + u8 res6[0x14]; /* 0x1E0 */ + u32 ecc_config; /* 0x1F4 */ + u32 ecc_control; /* 0x1F8 */ + u32 ecc_size_config; /* 0x1FC */ + u32 ecc1_result; /* 0x200 */ + u32 ecc2_result; /* 0x204 */ + u32 ecc3_result; /* 0x208 */ + u32 ecc4_result; /* 0x20C */ + u32 ecc5_result; /* 0x210 */ + u32 ecc6_result; /* 0x214 */ + u32 ecc7_result; /* 0x218 */ + u32 ecc8_result; /* 0x21C */ + u32 ecc9_result; /* 0x220 */ + u8 res7[12]; /* 0x224 */ + u32 testmomde_ctrl; /* 0x230 */ + u8 res8[12]; /* 0x234 */ + struct bch_res_0_3 bch_result_0_3[2]; /* 0x240 */ +}; + +/* Used for board specific gpmc initialization */ +extern struct gpmc *gpmc_cfg; + /* Encapsulating core pll registers */ struct cm_wkuppll { unsigned int wkclkstctrl; /* offset 0x00 */ diff --git a/arch/arm/include/asm/arch-am33xx/elm.h b/arch/arm/include/asm/arch-am33xx/elm.h new file mode 100644 index 0000000000..e80f7d48e4 --- /dev/null +++ b/arch/arm/include/asm/arch-am33xx/elm.h @@ -0,0 +1,93 @@ +/* + * (C) Copyright 2010-2011 Texas Instruments, <www.ti.com> + * Mansoor Ahamed <mansoor.ahamed@ti.com> + * + * Derived from work done by Rohit Choraria <rohitkc@ti.com> for omap3 + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef __ASM_ARCH_ELM_H +#define __ASM_ARCH_ELM_H +/* + * ELM Module Registers + */ + +/* ELM registers bit fields */ +#define ELM_SYSCONFIG_SOFTRESET_MASK (0x2) +#define ELM_SYSCONFIG_SOFTRESET (0x2) +#define ELM_SYSSTATUS_RESETDONE_MASK (0x1) +#define ELM_SYSSTATUS_RESETDONE (0x1) +#define ELM_LOCATION_CONFIG_ECC_BCH_LEVEL_MASK (0x3) +#define ELM_LOCATION_CONFIG_ECC_SIZE_MASK (0x7FF0000) +#define ELM_LOCATION_CONFIG_ECC_SIZE_POS (16) +#define ELM_SYNDROME_FRAGMENT_6_SYNDROME_VALID (0x00010000) +#define ELM_LOCATION_STATUS_ECC_CORRECTABLE_MASK (0x100) +#define ELM_LOCATION_STATUS_ECC_NB_ERRORS_MASK (0x1F) + +#ifndef __ASSEMBLY__ + +enum bch_level { + BCH_4_BIT = 0, + BCH_8_BIT, + BCH_16_BIT +}; + + +/* BCH syndrome registers */ +struct syndrome { + u32 syndrome_fragment_x[7]; /* 0x400, 0x404.... 0x418 */ + u8 res1[36]; /* 0x41c */ +}; + +/* BCH error status & location register */ +struct location { + u32 location_status; /* 0x800 */ + u8 res1[124]; /* 0x804 */ + u32 error_location_x[16]; /* 0x880.... */ + u8 res2[64]; /* 0x8c0 */ +}; + +/* BCH ELM register map - do not try to allocate memmory for this structure. + * We have used plenty of reserved variables to fill the slots in the ELM + * register memory map. + * Directly initialize the struct pointer to ELM base address. + */ +struct elm { + u32 rev; /* 0x000 */ + u8 res1[12]; /* 0x004 */ + u32 sysconfig; /* 0x010 */ + u32 sysstatus; /* 0x014 */ + u32 irqstatus; /* 0x018 */ + u32 irqenable; /* 0x01c */ + u32 location_config; /* 0x020 */ + u8 res2[92]; /* 0x024 */ + u32 page_ctrl; /* 0x080 */ + u8 res3[892]; /* 0x084 */ + struct syndrome syndrome_fragments[8]; /* 0x400 */ + u8 res4[512]; /* 0x600 */ + struct location error_location[8]; /* 0x800 */ +}; + +int elm_check_error(u8 *syndrome, u32 nibbles, u32 *error_count, + u32 *error_locations); +int elm_config(enum bch_level level); +void elm_reset(void); +void elm_init(void); +#endif /* __ASSEMBLY__ */ +#endif /* __ASM_ARCH_ELM_H */ diff --git a/arch/arm/include/asm/arch-am33xx/hardware.h b/arch/arm/include/asm/arch-am33xx/hardware.h index 24ab365ea3..6dd3296907 100644 --- a/arch/arm/include/asm/arch-am33xx/hardware.h +++ b/arch/arm/include/asm/arch-am33xx/hardware.h @@ -80,6 +80,9 @@ #define DDRPHY_0_CONFIG_BASE (CTRL_BASE + 0x1400) #define DDRPHY_CONFIG_BASE DDRPHY_0_CONFIG_BASE +/* GPMC Base address */ +#define GPMC_BASE 0x50000000 + /* CPSW Config space */ #define AM335X_CPSW_BASE 0x4A100000 #define AM335X_CPSW_MDIO_BASE 0x4A101000 diff --git a/arch/arm/include/asm/arch-am33xx/mem.h b/arch/arm/include/asm/arch-am33xx/mem.h new file mode 100644 index 0000000000..c3bf74e629 --- /dev/null +++ b/arch/arm/include/asm/arch-am33xx/mem.h @@ -0,0 +1,83 @@ +/* + * (C) Copyright 2006-2008 + * Texas Instruments, <www.ti.com> + * + * Author + * Mansoor Ahamed <mansoor.ahamed@ti.com> + * + * Initial Code from: + * Richard Woodruff <r-woodruff2@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _MEM_H_ +#define _MEM_H_ + +/* + * GPMC settings - + * Definitions is as per the following format + * #define <PART>_GPMC_CONFIG<x> <value> + * Where: + * PART is the part name e.g. STNOR - Intel Strata Flash + * x is GPMC config registers from 1 to 6 (there will be 6 macros) + * Value is corresponding value + * + * For every valid PRCM configuration there should be only one definition of + * the same. if values are independent of the board, this definition will be + * present in this file if values are dependent on the board, then this should + * go into corresponding mem-boardName.h file + * + * Currently valid part Names are (PART): + * M_NAND - Micron NAND + */ +#define GPMC_SIZE_256M 0x0 +#define GPMC_SIZE_128M 0x8 +#define GPMC_SIZE_64M 0xC +#define GPMC_SIZE_32M 0xE +#define GPMC_SIZE_16M 0xF + +#define M_NAND_GPMC_CONFIG1 0x00000800 +#define M_NAND_GPMC_CONFIG2 0x001e1e00 +#define M_NAND_GPMC_CONFIG3 0x001e1e00 +#define M_NAND_GPMC_CONFIG4 0x16051807 +#define M_NAND_GPMC_CONFIG5 0x00151e1e +#define M_NAND_GPMC_CONFIG6 0x16000f80 +#define M_NAND_GPMC_CONFIG7 0x00000008 + +/* max number of GPMC Chip Selects */ +#define GPMC_MAX_CS 8 +/* max number of GPMC regs */ +#define GPMC_MAX_REG 7 + +#define PISMO1_NOR 1 +#define PISMO1_NAND 2 +#define PISMO2_CS0 3 +#define PISMO2_CS1 4 +#define PISMO1_ONENAND 5 +#define DBG_MPDB 6 +#define PISMO2_NAND_CS0 7 +#define PISMO2_NAND_CS1 8 + +/* make it readable for the gpmc_init */ +#define PISMO1_NOR_BASE FLASH_BASE +#define PISMO1_NAND_BASE CONFIG_SYS_NAND_BASE +#define PISMO1_NAND_SIZE GPMC_SIZE_256M + +#endif /* endif _MEM_H_ */ diff --git a/arch/arm/include/asm/arch-am33xx/omap_gpmc.h b/arch/arm/include/asm/arch-am33xx/omap_gpmc.h new file mode 100644 index 0000000000..572f9d0b27 --- /dev/null +++ b/arch/arm/include/asm/arch-am33xx/omap_gpmc.h @@ -0,0 +1,120 @@ +/* + * (C) Copyright 2004-2008 Texas Instruments, <www.ti.com> + * Rohit Choraria <rohitkc@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef __ASM_ARCH_OMAP_GPMC_H +#define __ASM_ARCH_OMAP_GPMC_H + +#define GPMC_BUF_EMPTY 0 +#define GPMC_BUF_FULL 1 + +#define ECCCLEAR (0x1 << 8) +#define ECCRESULTREG1 (0x1 << 0) +#define ECCSIZE512BYTE 0xFF +#define ECCSIZE1 (ECCSIZE512BYTE << 22) +#define ECCSIZE0 (ECCSIZE512BYTE << 12) +#define ECCSIZE0SEL (0x000 << 0) + +/* Generic ECC Layouts */ +/* Large Page x8 NAND device Layout */ +#ifdef GPMC_NAND_ECC_LP_x8_LAYOUT +#define GPMC_NAND_HW_ECC_LAYOUT {\ + .eccbytes = 12,\ + .eccpos = {1, 2, 3, 4, 5, 6, 7, 8,\ + 9, 10, 11, 12},\ + .oobfree = {\ + {.offset = 13,\ + .length = 51 } } \ +} +#endif + +/* Large Page x16 NAND device Layout */ +#ifdef GPMC_NAND_ECC_LP_x16_LAYOUT +#define GPMC_NAND_HW_ECC_LAYOUT {\ + .eccbytes = 12,\ + .eccpos = {2, 3, 4, 5, 6, 7, 8, 9,\ + 10, 11, 12, 13},\ + .oobfree = {\ + {.offset = 14,\ + .length = 50 } } \ +} +#endif + +/* Small Page x8 NAND device Layout */ +#ifdef GPMC_NAND_ECC_SP_x8_LAYOUT +#define GPMC_NAND_HW_ECC_LAYOUT {\ + .eccbytes = 3,\ + .eccpos = {1, 2, 3},\ + .oobfree = {\ + {.offset = 4,\ + .length = 12 } } \ +} +#endif + +/* Small Page x16 NAND device Layout */ +#ifdef GPMC_NAND_ECC_SP_x16_LAYOUT +#define GPMC_NAND_HW_ECC_LAYOUT {\ + .eccbytes = 3,\ + .eccpos = {2, 3, 4},\ + .oobfree = {\ + {.offset = 5,\ + .length = 11 } } \ +} +#endif + +#define GPMC_NAND_HW_BCH4_ECC_LAYOUT {\ + .eccbytes = 32,\ + .eccpos = {2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15,\ + 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27,\ + 28, 29, 30, 31, 32, 33},\ + .oobfree = {\ + {.offset = 34,\ + .length = 30 } } \ +} + +#define GPMC_NAND_HW_BCH8_ECC_LAYOUT {\ + .eccbytes = 56,\ + .eccpos = {2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15,\ + 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27,\ + 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39,\ + 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51,\ + 52, 53, 54, 55, 56, 57},\ + .oobfree = {\ + {.offset = 58,\ + .length = 6 } } \ +} + +#define GPMC_NAND_HW_BCH16_ECC_LAYOUT {\ + .eccbytes = 104,\ + .eccpos = {2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15,\ + 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27,\ + 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39,\ + 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51,\ + 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63,\ + 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75,\ + 76, 77, 78, 79, 80, 81, 82, 83, 84, 85, 86, 87,\ + 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99,\ + 100, 101, 102, 103, 104, 105},\ + .oobfree = {\ + {.offset = 106,\ + .length = 8 } } \ +} +#endif /* __ASM_ARCH_OMAP_GPMC_H */ diff --git a/arch/arm/include/asm/arch-am33xx/sys_proto.h b/arch/arm/include/asm/arch-am33xx/sys_proto.h index 9cf35e0257..588d8de82f 100644 --- a/arch/arm/include/asm/arch-am33xx/sys_proto.h +++ b/arch/arm/include/asm/arch-am33xx/sys_proto.h @@ -33,4 +33,7 @@ u32 get_device_type(void); void setup_clocks_for_console(void); void ddr_pll_config(unsigned int ddrpll_M); +void sdelay(unsigned long); +void gpmc_init(void); +void omap_nand_switch_ecc(int); #endif diff --git a/arch/arm/include/asm/arch-at91/at91sam9x5.h b/arch/arm/include/asm/arch-at91/at91sam9x5.h index 0e728c96dc..de0f1b1923 100644 --- a/arch/arm/include/asm/arch-at91/at91sam9x5.h +++ b/arch/arm/include/asm/arch-at91/at91sam9x5.h @@ -154,6 +154,8 @@ #define ATMEL_PIO_PORTS 4 #define CPU_HAS_PIO3 #define PIO_SCDR_DIV (0x3fff << 0) /* Slow Clock Divider Mask */ +#define ATMEL_PMC_UHP AT91SAM926x_PMC_UHP +#define ATMEL_ID_UHP ATMEL_ID_UHPHS /* * at91sam9x5 specific prototypes diff --git a/arch/arm/include/asm/arch-exynos/clk.h b/arch/arm/include/asm/arch-exynos/clk.h index 552902573f..1935b0b5b8 100644 --- a/arch/arm/include/asm/arch-exynos/clk.h +++ b/arch/arm/include/asm/arch-exynos/clk.h @@ -34,9 +34,14 @@ unsigned long get_arm_clk(void); unsigned long get_i2c_clk(void); unsigned long get_pwm_clk(void); unsigned long get_uart_clk(int dev_index); +unsigned long get_mmc_clk(int dev_index); void set_mmc_clk(int dev_index, unsigned int div); unsigned long get_lcd_clk(void); void set_lcd_clk(void); void set_mipi_clk(void); +void set_i2s_clk_source(void); +int set_i2s_clk_prescaler(unsigned int src_frq, unsigned int dst_frq); +int set_epll_clk(unsigned long rate); +int set_spi_clk(int periph_id, unsigned int rate); #endif diff --git a/arch/arm/include/asm/arch-exynos/clock.h b/arch/arm/include/asm/arch-exynos/clock.h index fce38efbb2..9b56b4e51b 100644 --- a/arch/arm/include/asm/arch-exynos/clock.h +++ b/arch/arm/include/asm/arch-exynos/clock.h @@ -251,6 +251,282 @@ struct exynos4_clock { unsigned int div_iem_l1; }; +struct exynos4x12_clock { + unsigned char res1[0x4200]; + unsigned int src_leftbus; + unsigned char res2[0x1fc]; + unsigned int mux_stat_leftbus; + unsigned char res3[0xfc]; + unsigned int div_leftbus; + unsigned char res4[0xfc]; + unsigned int div_stat_leftbus; + unsigned char res5[0x1fc]; + unsigned int gate_ip_leftbus; + unsigned char res6[0x12c]; + unsigned int gate_ip_image; + unsigned char res7[0xcc]; + unsigned int clkout_leftbus; + unsigned int clkout_leftbus_div_stat; + unsigned char res8[0x37f8]; + unsigned int src_rightbus; + unsigned char res9[0x1fc]; + unsigned int mux_stat_rightbus; + unsigned char res10[0xfc]; + unsigned int div_rightbus; + unsigned char res11[0xfc]; + unsigned int div_stat_rightbus; + unsigned char res12[0x1fc]; + unsigned int gate_ip_rightbus; + unsigned char res13[0x15c]; + unsigned int gate_ip_perir; + unsigned char res14[0x9c]; + unsigned int clkout_rightbus; + unsigned int clkout_rightbus_div_stat; + unsigned char res15[0x3608]; + unsigned int epll_lock; + unsigned char res16[0xc]; + unsigned int vpll_lock; + unsigned char res17[0xec]; + unsigned int epll_con0; + unsigned int epll_con1; + unsigned int epll_con2; + unsigned char res18[0x4]; + unsigned int vpll_con0; + unsigned int vpll_con1; + unsigned int vpll_con2; + unsigned char res19[0xe4]; + unsigned int src_top0; + unsigned int src_top1; + unsigned char res20[0x8]; + unsigned int src_cam; + unsigned int src_tv; + unsigned int src_mfc; + unsigned int src_g3d; + unsigned char res21[0x4]; + unsigned int src_lcd; + unsigned int src_isp; + unsigned int src_maudio; + unsigned int src_fsys; + unsigned char res22[0xc]; + unsigned int src_peril0; + unsigned int src_peril1; + unsigned int src_cam1; + unsigned char res23[0xb4]; + unsigned int src_mask_top; + unsigned char res24[0xc]; + unsigned int src_mask_cam; + unsigned int src_mask_tv; + unsigned char res25[0xc]; + unsigned int src_mask_lcd; + unsigned int src_mask_isp; + unsigned int src_mask_maudio; + unsigned int src_mask_fsys; + unsigned char res26[0xc]; + unsigned int src_mask_peril0; + unsigned int src_mask_peril1; + unsigned char res27[0xb8]; + unsigned int mux_stat_top0; + unsigned int mux_stat_top1; + unsigned char res28[0x10]; + unsigned int mux_stat_mfc; + unsigned int mux_stat_g3d; + unsigned char res29[0x28]; + unsigned int mux_stat_cam1; + unsigned char res30[0xb4]; + unsigned int div_top; + unsigned char res31[0xc]; + unsigned int div_cam; + unsigned int div_tv; + unsigned int div_mfc; + unsigned int div_g3d; + unsigned char res32[0x4]; + unsigned int div_lcd; + unsigned int div_isp; + unsigned int div_maudio; + unsigned int div_fsys0; + unsigned int div_fsys1; + unsigned int div_fsys2; + unsigned int div_fsys3; + unsigned int div_peril0; + unsigned int div_peril1; + unsigned int div_peril2; + unsigned int div_peril3; + unsigned int div_peril4; + unsigned int div_peril5; + unsigned int div_cam1; + unsigned char res33[0x14]; + unsigned int div2_ratio; + unsigned char res34[0x8c]; + unsigned int div_stat_top; + unsigned char res35[0xc]; + unsigned int div_stat_cam; + unsigned int div_stat_tv; + unsigned int div_stat_mfc; + unsigned int div_stat_g3d; + unsigned char res36[0x4]; + unsigned int div_stat_lcd; + unsigned int div_stat_isp; + unsigned int div_stat_maudio; + unsigned int div_stat_fsys0; + unsigned int div_stat_fsys1; + unsigned int div_stat_fsys2; + unsigned int div_stat_fsys3; + unsigned int div_stat_peril0; + unsigned int div_stat_peril1; + unsigned int div_stat_peril2; + unsigned int div_stat_peril3; + unsigned int div_stat_peril4; + unsigned int div_stat_peril5; + unsigned int div_stat_cam1; + unsigned char res37[0x14]; + unsigned int div2_stat; + unsigned char res38[0x29c]; + unsigned int gate_ip_cam; + unsigned int gate_ip_tv; + unsigned int gate_ip_mfc; + unsigned int gate_ip_g3d; + unsigned char res39[0x4]; + unsigned int gate_ip_lcd; + unsigned int gate_ip_isp; + unsigned char res40[0x4]; + unsigned int gate_ip_fsys; + unsigned char res41[0x8]; + unsigned int gate_ip_gps; + unsigned int gate_ip_peril; + unsigned char res42[0xc]; + unsigned char res43[0x4]; + unsigned char res44[0xc]; + unsigned int gate_block; + unsigned char res45[0x8c]; + unsigned int clkout_cmu_top; + unsigned int clkout_cmu_top_div_stat; + unsigned char res46[0x3600]; + unsigned int mpll_lock; + unsigned char res47[0xfc]; + unsigned int mpll_con0; + unsigned int mpll_con1; + unsigned char res48[0xf0]; + unsigned int src_dmc; + unsigned char res49[0xfc]; + unsigned int src_mask_dmc; + unsigned char res50[0xfc]; + unsigned int mux_stat_dmc; + unsigned char res51[0xfc]; + unsigned int div_dmc0; + unsigned int div_dmc1; + unsigned char res52[0xf8]; + unsigned int div_stat_dmc0; + unsigned int div_stat_dmc1; + unsigned char res53[0xf8]; + unsigned int gate_bus_dmc0; + unsigned int gate_bus_dmc1; + unsigned char res54[0x1f8]; + unsigned int gate_ip_dmc0; + unsigned int gate_ip_dmc1; + unsigned char res55[0xf8]; + unsigned int clkout_cmu_dmc; + unsigned int clkout_cmu_dmc_div_stat; + unsigned char res56[0x5f8]; + unsigned int dcgidx_map0; + unsigned int dcgidx_map1; + unsigned int dcgidx_map2; + unsigned char res57[0x14]; + unsigned int dcgperf_map0; + unsigned int dcgperf_map1; + unsigned char res58[0x18]; + unsigned int dvcidx_map; + unsigned char res59[0x1c]; + unsigned int freq_cpu; + unsigned int freq_dpm; + unsigned char res60[0x18]; + unsigned int dvsemclk_en; + unsigned int maxperf; + unsigned char res61[0x8]; + unsigned int dmc_freq_ctrl; + unsigned int dmc_pause_ctrl; + unsigned int dddrphy_lock_ctrl; + unsigned int c2c_state; + unsigned char res62[0x2f60]; + unsigned int apll_lock; + unsigned char res63[0x8]; + unsigned char res64[0xf4]; + unsigned int apll_con0; + unsigned int apll_con1; + unsigned char res65[0xf8]; + unsigned int src_cpu; + unsigned char res66[0x1fc]; + unsigned int mux_stat_cpu; + unsigned char res67[0xfc]; + unsigned int div_cpu0; + unsigned int div_cpu1; + unsigned char res68[0xf8]; + unsigned int div_stat_cpu0; + unsigned int div_stat_cpu1; + unsigned char res69[0x2f8]; + unsigned int clk_gate_ip_cpu; + unsigned char res70[0xfc]; + unsigned int clkout_cmu_cpu; + unsigned int clkout_cmu_cpu_div_stat; + unsigned char res71[0x5f8]; + unsigned int armclk_stopctrl; + unsigned int atclk_stopctrl; + unsigned char res72[0x10]; + unsigned char res73[0x8]; + unsigned int pwr_ctrl; + unsigned int pwr_ctrl2; + unsigned char res74[0xd8]; + unsigned int apll_con0_l8; + unsigned int apll_con0_l7; + unsigned int apll_con0_l6; + unsigned int apll_con0_l5; + unsigned int apll_con0_l4; + unsigned int apll_con0_l3; + unsigned int apll_con0_l2; + unsigned int apll_con0_l1; + unsigned int iem_control; + unsigned char res75[0xdc]; + unsigned int apll_con1_l8; + unsigned int apll_con1_l7; + unsigned int apll_con1_l6; + unsigned int apll_con1_l5; + unsigned int apll_con1_l4; + unsigned int apll_con1_l3; + unsigned int apll_con1_l2; + unsigned int apll_con1_l1; + unsigned char res76[0xe0]; + unsigned int div_iem_l8; + unsigned int div_iem_l7; + unsigned int div_iem_l6; + unsigned int div_iem_l5; + unsigned int div_iem_l4; + unsigned int div_iem_l3; + unsigned int div_iem_l2; + unsigned int div_iem_l1; + unsigned char res77[0xe0]; + unsigned int l2_status; + unsigned char res78[0xc]; + unsigned int cpu_status; + unsigned char res79[0xc]; + unsigned int ptm_status; + unsigned char res80[0x2edc]; + unsigned int div_isp0; + unsigned int div_isp1; + unsigned char res81[0xf8]; + unsigned int div_stat_isp0; + unsigned int div_stat_isp1; + unsigned char res82[0x3f8]; + unsigned int gate_ip_isp0; + unsigned int gate_ip_isp1; + unsigned char res83[0x1f8]; + unsigned int clkout_cmu_isp; + unsigned int clkout_cmu_ispd_div_stat; + unsigned char res84[0xf8]; + unsigned int cmu_isp_spar0; + unsigned int cmu_isp_spar1; + unsigned int cmu_isp_spar2; + unsigned int cmu_isp_spar3; +}; + struct exynos5_clock { unsigned int apll_lock; unsigned char res1[0xfc]; @@ -595,9 +871,38 @@ struct exynos5_clock { unsigned int pll_div2_sel; unsigned char res123[0xf5d8]; }; + +/* structure for epll configuration used in audio clock configuration */ +struct set_epll_con_val { + unsigned int freq_out; /* frequency out */ + unsigned int en_lock_det; /* enable lock detect */ + unsigned int m_div; /* m divider value */ + unsigned int p_div; /* p divider value */ + unsigned int s_div; /* s divider value */ + unsigned int k_dsm; /* k value of delta signal modulator */ +}; #endif #define MPLL_FOUT_SEL_SHIFT 4 +#define EXYNOS5_EPLLCON0_LOCKED_SHIFT 29 /* EPLL Locked bit position*/ +#define TIMEOUT_EPLL_LOCK 1000 + +#define AUDIO_0_RATIO_MASK 0x0f +#define AUDIO_1_RATIO_MASK 0x0f + +#define AUDIO1_SEL_MASK 0xf +#define CLK_SRC_SCLK_EPLL 0x7 + +/* CON0 bit-fields */ +#define EPLL_CON0_MDIV_MASK 0x1ff +#define EPLL_CON0_PDIV_MASK 0x3f +#define EPLL_CON0_SDIV_MASK 0x7 +#define EPLL_CON0_MDIV_SHIFT 16 +#define EPLL_CON0_PDIV_SHIFT 8 +#define EPLL_CON0_SDIV_SHIFT 0 +#define EPLL_CON0_LOCK_DET_EN_SHIFT 28 +#define EPLL_CON0_LOCK_DET_EN_MASK 1 + #define MPLL_FOUT_SEL_MASK 0x1 #define BPLL_FOUT_SEL_SHIFT 0 #define BPLL_FOUT_SEL_MASK 0x1 diff --git a/arch/arm/include/asm/arch-exynos/cpu.h b/arch/arm/include/asm/arch-exynos/cpu.h index 3073ca1a81..eb34422353 100644 --- a/arch/arm/include/asm/arch-exynos/cpu.h +++ b/arch/arm/include/asm/arch-exynos/cpu.h @@ -27,7 +27,7 @@ #define EXYNOS_CPU_NAME "Exynos" #define EXYNOS4_ADDR_BASE 0x10000000 -/* EXYNOS4 */ +/* EXYNOS4 Common*/ #define EXYNOS4_I2C_SPACING 0x10000 #define EXYNOS4_GPIO_PART3_BASE 0x03860000 @@ -53,14 +53,50 @@ #define EXYNOS4_UART_BASE 0x13800000 #define EXYNOS4_I2C_BASE 0x13860000 #define EXYNOS4_ADC_BASE 0x13910000 +#define EXYNOS4_SPI_BASE 0x13920000 #define EXYNOS4_PWMTIMER_BASE 0x139D0000 #define EXYNOS4_MODEM_BASE 0x13A00000 #define EXYNOS4_USBPHY_CONTROL 0x10020704 +#define EXYNOS4_I2S_BASE 0xE2100000 #define EXYNOS4_GPIO_PART4_BASE DEVICE_NOT_AVAILABLE #define EXYNOS4_DP_BASE DEVICE_NOT_AVAILABLE - -/* EXYNOS5 */ +#define EXYNOS4_SPI_ISP_BASE DEVICE_NOT_AVAILABLE + +/* EXYNOS4X12 */ +#define EXYNOS4X12_GPIO_PART3_BASE 0x03860000 +#define EXYNOS4X12_PRO_ID 0x10000000 +#define EXYNOS4X12_SYSREG_BASE 0x10010000 +#define EXYNOS4X12_POWER_BASE 0x10020000 +#define EXYNOS4X12_SWRESET 0x10020400 +#define EXYNOS4X12_USBPHY_CONTROL 0x10020704 +#define EXYNOS4X12_CLOCK_BASE 0x10030000 +#define EXYNOS4X12_SYSTIMER_BASE 0x10050000 +#define EXYNOS4X12_WATCHDOG_BASE 0x10060000 +#define EXYNOS4X12_DMC0_BASE 0x10600000 +#define EXYNOS4X12_DMC1_BASE 0x10610000 +#define EXYNOS4X12_GPIO_PART4_BASE 0x106E0000 +#define EXYNOS4X12_GPIO_PART2_BASE 0x11000000 +#define EXYNOS4X12_GPIO_PART1_BASE 0x11400000 +#define EXYNOS4X12_FIMD_BASE 0x11C00000 +#define EXYNOS4X12_MIPI_DSIM_BASE 0x11C80000 +#define EXYNOS4X12_USBOTG_BASE 0x12480000 +#define EXYNOS4X12_MMC_BASE 0x12510000 +#define EXYNOS4X12_SROMC_BASE 0x12570000 +#define EXYNOS4X12_USB_HOST_EHCI_BASE 0x12580000 +#define EXYNOS4X12_USBPHY_BASE 0x125B0000 +#define EXYNOS4X12_UART_BASE 0x13800000 +#define EXYNOS4X12_I2C_BASE 0x13860000 +#define EXYNOS4X12_PWMTIMER_BASE 0x139D0000 + +#define EXYNOS4X12_ADC_BASE DEVICE_NOT_AVAILABLE +#define EXYNOS4X12_DP_BASE DEVICE_NOT_AVAILABLE +#define EXYNOS4X12_MODEM_BASE DEVICE_NOT_AVAILABLE +#define EXYNOS4X12_I2S_BASE DEVICE_NOT_AVAILABLE +#define EXYNOS4X12_SPI_BASE DEVICE_NOT_AVAILABLE +#define EXYNOS4X12_SPI_ISP_BASE DEVICE_NOT_AVAILABLE + +/* EXYNOS5 Common*/ #define EXYNOS5_I2C_SPACING 0x10000 #define EXYNOS5_GPIO_PART4_BASE 0x03860000 @@ -83,7 +119,10 @@ #define EXYNOS5_SROMC_BASE 0x12250000 #define EXYNOS5_UART_BASE 0x12C00000 #define EXYNOS5_I2C_BASE 0x12C60000 +#define EXYNOS5_SPI_BASE 0x12D20000 +#define EXYNOS5_I2S_BASE 0x12D60000 #define EXYNOS5_PWMTIMER_BASE 0x12DD0000 +#define EXYNOS5_SPI_ISP_BASE 0x131A0000 #define EXYNOS5_GPIO_PART2_BASE 0x13400000 #define EXYNOS5_FIMD_BASE 0x14400000 #define EXYNOS5_DP_BASE 0x145B0000 @@ -141,15 +180,27 @@ static inline int cpu_is_##type(void) \ IS_SAMSUNG_TYPE(exynos4, 0x4) IS_SAMSUNG_TYPE(exynos5, 0x5) +#define IS_EXYNOS_TYPE(type, id) \ +static inline int proid_is_##type(void) \ +{ \ + return s5p_cpu_id == id; \ +} + +IS_EXYNOS_TYPE(exynos4210, 0x4210) +IS_EXYNOS_TYPE(exynos4412, 0x4412) +IS_EXYNOS_TYPE(exynos5250, 0x5250) + #define SAMSUNG_BASE(device, base) \ static inline unsigned int samsung_get_base_##device(void) \ { \ - if (cpu_is_exynos4()) \ + if (cpu_is_exynos4()) { \ + if (proid_is_exynos4412()) \ + return EXYNOS4X12_##base; \ return EXYNOS4_##base; \ - else if (cpu_is_exynos5()) \ + } else if (cpu_is_exynos5()) { \ return EXYNOS5_##base; \ - else \ - return 0; \ + } \ + return 0; \ } SAMSUNG_BASE(adc, ADC_BASE) @@ -158,6 +209,7 @@ SAMSUNG_BASE(dp, DP_BASE) SAMSUNG_BASE(sysreg, SYSREG_BASE) SAMSUNG_BASE(fimd, FIMD_BASE) SAMSUNG_BASE(i2c, I2C_BASE) +SAMSUNG_BASE(i2s, I2S_BASE) SAMSUNG_BASE(mipi_dsim, MIPI_DSIM_BASE) SAMSUNG_BASE(gpio_part1, GPIO_PART1_BASE) SAMSUNG_BASE(gpio_part2, GPIO_PART2_BASE) @@ -175,6 +227,8 @@ SAMSUNG_BASE(usb_ehci, USB_HOST_EHCI_BASE) SAMSUNG_BASE(usb_otg, USBOTG_BASE) SAMSUNG_BASE(watchdog, WATCHDOG_BASE) SAMSUNG_BASE(power, POWER_BASE) +SAMSUNG_BASE(spi, SPI_BASE) +SAMSUNG_BASE(spi_isp, SPI_ISP_BASE) #endif #endif /* _EXYNOS4_CPU_H */ diff --git a/arch/arm/include/asm/arch-exynos/dp_info.h b/arch/arm/include/asm/arch-exynos/dp_info.h index 35694980fa..102b709bd7 100644 --- a/arch/arm/include/asm/arch-exynos/dp_info.h +++ b/arch/arm/include/asm/arch-exynos/dp_info.h @@ -211,4 +211,6 @@ unsigned int exynos_init_dp(void) } #endif +void exynos_set_dp_platform_data(struct exynos_dp_platform_data *pd); + #endif /* _DP_INFO_H */ diff --git a/arch/arm/include/asm/arch-exynos/gpio.h b/arch/arm/include/asm/arch-exynos/gpio.h index 97be4eac05..cfe10246c5 100644 --- a/arch/arm/include/asm/arch-exynos/gpio.h +++ b/arch/arm/include/asm/arch-exynos/gpio.h @@ -79,6 +79,67 @@ struct exynos4_gpio_part3 { struct s5p_gpio_bank z; }; +struct exynos4x12_gpio_part1 { + struct s5p_gpio_bank a0; + struct s5p_gpio_bank a1; + struct s5p_gpio_bank b; + struct s5p_gpio_bank c0; + struct s5p_gpio_bank c1; + struct s5p_gpio_bank d0; + struct s5p_gpio_bank d1; + struct s5p_gpio_bank res1[0x5]; + struct s5p_gpio_bank f0; + struct s5p_gpio_bank f1; + struct s5p_gpio_bank f2; + struct s5p_gpio_bank f3; + struct s5p_gpio_bank res2[0x2]; + struct s5p_gpio_bank j0; + struct s5p_gpio_bank j1; +}; + +struct exynos4x12_gpio_part2 { + struct s5p_gpio_bank res1[0x2]; + struct s5p_gpio_bank k0; + struct s5p_gpio_bank k1; + struct s5p_gpio_bank k2; + struct s5p_gpio_bank k3; + struct s5p_gpio_bank l0; + struct s5p_gpio_bank l1; + struct s5p_gpio_bank l2; + struct s5p_gpio_bank y0; + struct s5p_gpio_bank y1; + struct s5p_gpio_bank y2; + struct s5p_gpio_bank y3; + struct s5p_gpio_bank y4; + struct s5p_gpio_bank y5; + struct s5p_gpio_bank y6; + struct s5p_gpio_bank res2[0x3]; + struct s5p_gpio_bank m0; + struct s5p_gpio_bank m1; + struct s5p_gpio_bank m2; + struct s5p_gpio_bank m3; + struct s5p_gpio_bank m4; + struct s5p_gpio_bank res3[0x48]; + struct s5p_gpio_bank x0; + struct s5p_gpio_bank x1; + struct s5p_gpio_bank x2; + struct s5p_gpio_bank x3; +}; + +struct exynos4x12_gpio_part3 { + struct s5p_gpio_bank z; +}; + +struct exynos4x12_gpio_part4 { + struct s5p_gpio_bank v0; + struct s5p_gpio_bank v1; + struct s5p_gpio_bank res1[0x1]; + struct s5p_gpio_bank v2; + struct s5p_gpio_bank v3; + struct s5p_gpio_bank res2[0x1]; + struct s5p_gpio_bank v4; +}; + struct exynos5_gpio_part1 { struct s5p_gpio_bank a0; struct s5p_gpio_bank a1; @@ -163,6 +224,30 @@ void s5p_gpio_set_rate(struct s5p_gpio_bank *bank, int gpio, int mode); - EXYNOS4_GPIO_PART2_BASE) / sizeof(struct s5p_gpio_bank)) \ * GPIO_PER_BANK) + pin) + EXYNOS4_GPIO_PART1_MAX) +#define exynos4x12_gpio_part1_get_nr(bank, pin) \ + ((((((unsigned int) &(((struct exynos4x12_gpio_part1 *) \ + EXYNOS4X12_GPIO_PART1_BASE)->bank)) \ + - EXYNOS4X12_GPIO_PART1_BASE) / sizeof(struct s5p_gpio_bank)) \ + * GPIO_PER_BANK) + pin) + +#define EXYNOS4X12_GPIO_PART1_MAX ((sizeof(struct exynos4x12_gpio_part1) \ + / sizeof(struct s5p_gpio_bank)) * GPIO_PER_BANK) + +#define exynos4x12_gpio_part2_get_nr(bank, pin) \ + (((((((unsigned int) &(((struct exynos4x12_gpio_part2 *) \ + EXYNOS4X12_GPIO_PART2_BASE)->bank)) \ + - EXYNOS4X12_GPIO_PART2_BASE) / sizeof(struct s5p_gpio_bank)) \ + * GPIO_PER_BANK) + pin) + EXYNOS4X12_GPIO_PART1_MAX) + +#define EXYNOS4X12_GPIO_PART2_MAX ((sizeof(struct exynos4x12_gpio_part2) \ + / sizeof(struct s5p_gpio_bank)) * GPIO_PER_BANK) + +#define exynos4x12_gpio_part3_get_nr(bank, pin) \ + (((((((unsigned int) &(((struct exynos4x12_gpio_part3 *) \ + EXYNOS4X12_GPIO_PART3_BASE)->bank)) \ + - EXYNOS4X12_GPIO_PART3_BASE) / sizeof(struct s5p_gpio_bank)) \ + * GPIO_PER_BANK) + pin) + EXYNOS4X12_GPIO_PART2_MAX) + #define exynos5_gpio_part1_get_nr(bank, pin) \ ((((((unsigned int) &(((struct exynos5_gpio_part1 *) \ EXYNOS5_GPIO_PART1_BASE)->bank)) \ @@ -207,6 +292,25 @@ static inline unsigned int s5p_gpio_base(int nr) return 0; } +static inline unsigned int s5p_gpio_part_max(int nr) +{ + if (cpu_is_exynos5()) { + if (nr < EXYNOS5_GPIO_PART1_MAX) + return 0; + else if (nr < EXYNOS5_GPIO_PART2_MAX) + return EXYNOS5_GPIO_PART1_MAX; + else + return EXYNOS5_GPIO_PART2_MAX; + + } else if (cpu_is_exynos4()) { + if (nr < EXYNOS4_GPIO_PART1_MAX) + return 0; + else + return EXYNOS4_GPIO_PART1_MAX; + } + + return 0; +} #endif /* Pin configurations */ diff --git a/arch/arm/include/asm/arch-exynos/i2s-regs.h b/arch/arm/include/asm/arch-exynos/i2s-regs.h new file mode 100644 index 0000000000..2326ca0364 --- /dev/null +++ b/arch/arm/include/asm/arch-exynos/i2s-regs.h @@ -0,0 +1,66 @@ +/* + * Copyright (C) 2012 Samsung Electronics + * R. Chandrasekar <rcsekar@samsung.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __I2S_REGS_H__ +#define __I2S_REGS_H__ + +#define CON_TXFIFO_FULL (1 << 8) +#define CON_TXCH_PAUSE (1 << 4) +#define CON_ACTIVE (1 << 0) + +#define MOD_BLCP_SHIFT 24 +#define MOD_BLCP_16BIT (0 << MOD_BLCP_SHIFT) +#define MOD_BLCP_8BIT (1 << MOD_BLCP_SHIFT) +#define MOD_BLCP_24BIT (2 << MOD_BLCP_SHIFT) +#define MOD_BLCP_MASK (3 << MOD_BLCP_SHIFT) + +#define MOD_BLC_16BIT (0 << 13) +#define MOD_BLC_8BIT (1 << 13) +#define MOD_BLC_24BIT (2 << 13) +#define MOD_BLC_MASK (3 << 13) + +#define MOD_SLAVE (1 << 11) +#define MOD_MASK (3 << 8) +#define MOD_LR_LLOW (0 << 7) +#define MOD_LR_RLOW (1 << 7) +#define MOD_SDF_IIS (0 << 5) +#define MOD_SDF_MSB (1 << 5) +#define MOD_SDF_LSB (2 << 5) +#define MOD_SDF_MASK (3 << 5) +#define MOD_RCLK_256FS (0 << 3) +#define MOD_RCLK_512FS (1 << 3) +#define MOD_RCLK_384FS (2 << 3) +#define MOD_RCLK_768FS (3 << 3) +#define MOD_RCLK_MASK (3 << 3) +#define MOD_BCLK_32FS (0 << 1) +#define MOD_BCLK_48FS (1 << 1) +#define MOD_BCLK_16FS (2 << 1) +#define MOD_BCLK_24FS (3 << 1) +#define MOD_BCLK_MASK (3 << 1) + +#define MOD_CDCLKCON (1 << 12) + +#define FIC_TXFLUSH (1 << 15) +#define FIC_RXFLUSH (1 << 7) + +#endif /* __I2S_REGS_H__ */ diff --git a/arch/arm/include/asm/arch-exynos/mipi_dsim.h b/arch/arm/include/asm/arch-exynos/mipi_dsim.h index 9a7cbeb599..c1c9a3578a 100644 --- a/arch/arm/include/asm/arch-exynos/mipi_dsim.h +++ b/arch/arm/include/asm/arch-exynos/mipi_dsim.h @@ -358,7 +358,14 @@ struct mipi_dsim_lcd_driver { void (*mipi_display_on)(struct mipi_dsim_device *dsim_dev); }; +#ifdef CONFIG_EXYNOS_MIPI_DSIM int exynos_mipi_dsi_init(void); +#else +static inline int exynos_mipi_dsi_init(void) +{ + return 0; +} +#endif /* * register mipi_dsim_lcd_driver object defined by lcd panel driver diff --git a/arch/arm/include/asm/arch-exynos/periph.h b/arch/arm/include/asm/arch-exynos/periph.h index b861d7d584..89bcdfc0cc 100644 --- a/arch/arm/include/asm/arch-exynos/periph.h +++ b/arch/arm/include/asm/arch-exynos/periph.h @@ -25,12 +25,17 @@ #define __ASM_ARM_ARCH_PERIPH_H /* - * Peripherals requiring clock/pinmux configuration. List will + * Peripherals required for pinmux configuration. List will * grow with support for more devices getting added. + * Numbering based on interrupt table. * */ enum periph_id { - PERIPH_ID_I2C0, + PERIPH_ID_UART0 = 51, + PERIPH_ID_UART1, + PERIPH_ID_UART2, + PERIPH_ID_UART3, + PERIPH_ID_I2C0 = 56, PERIPH_ID_I2C1, PERIPH_ID_I2C2, PERIPH_ID_I2C3, @@ -38,15 +43,24 @@ enum periph_id { PERIPH_ID_I2C5, PERIPH_ID_I2C6, PERIPH_ID_I2C7, - PERIPH_ID_SDMMC0, + PERIPH_ID_SPI0 = 68, + PERIPH_ID_SPI1, + PERIPH_ID_SPI2, + PERIPH_ID_SDMMC0 = 75, PERIPH_ID_SDMMC1, PERIPH_ID_SDMMC2, PERIPH_ID_SDMMC3, - PERIPH_ID_SROMC, - PERIPH_ID_UART0, - PERIPH_ID_UART1, - PERIPH_ID_UART2, - PERIPH_ID_UART3, + PERIPH_ID_I2S1 = 99, + + /* Since following peripherals do + * not have shared peripheral interrupts (SPIs) + * they are numbered arbitiraly after the maximum + * SPIs Exynos has (128) + */ + PERIPH_ID_SROMC = 128, + PERIPH_ID_SPI3, + PERIPH_ID_SPI4, + PERIPH_ID_SDMMC4, PERIPH_ID_COUNT, PERIPH_ID_NONE = -1, diff --git a/arch/arm/include/asm/arch-exynos/pinmux.h b/arch/arm/include/asm/arch-exynos/pinmux.h index 10ea736c7d..014eebc75d 100644 --- a/arch/arm/include/asm/arch-exynos/pinmux.h +++ b/arch/arm/include/asm/arch-exynos/pinmux.h @@ -55,4 +55,12 @@ enum { */ int exynos_pinmux_config(int peripheral, int flags); +/** + * Decode the peripheral id using the interrpt numbers. + * + * @param blob Device tree blob + * @param node FDT I2C node to find + * @return peripheral id if ok, PERIPH_ID_NONE on error + */ +int pinmux_decode_periph_id(const void *blob, int node); #endif diff --git a/arch/arm/include/asm/arch-exynos/sound.h b/arch/arm/include/asm/arch-exynos/sound.h new file mode 100644 index 0000000000..d1bd2f6966 --- /dev/null +++ b/arch/arm/include/asm/arch-exynos/sound.h @@ -0,0 +1,44 @@ +/* + * Copyright (C) 2012 Samsung Electronics + * Rajeshwari Shinde <rajeshwari.s@samsung.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + +#ifndef __SOUND_ARCH_H__ +#define __SOUND_ARCH_H__ + +/* I2S values */ +#define I2S_PLL_CLK 192000000 +#define I2S_SAMPLING_RATE 48000 +#define I2S_BITS_PER_SAMPLE 16 +#define I2S_CHANNELS 2 +#define I2S_RFS 256 +#define I2S_BFS 32 + +/* I2C values */ +#define AUDIO_I2C_BUS 1 +#define AUDIO_I2C_REG 0x1a + +/* Audio Codec */ +#define AUDIO_CODEC "wm8994" + +#define AUDIO_COMPAT 1 +#endif diff --git a/arch/arm/include/asm/arch-exynos/spi.h b/arch/arm/include/asm/arch-exynos/spi.h new file mode 100644 index 0000000000..7cab1e9917 --- /dev/null +++ b/arch/arm/include/asm/arch-exynos/spi.h @@ -0,0 +1,78 @@ +/* + * (C) Copyright 2012 SAMSUNG Electronics + * Padmavathi Venna <padma.v@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __ASM_ARCH_EXYNOS_COMMON_SPI_H_ +#define __ASM_ARCH_EXYNOS_COMMON_SPI_H_ + +#ifndef __ASSEMBLY__ + +/* SPI peripheral register map; padded to 64KB */ +struct exynos_spi { + unsigned int ch_cfg; /* 0x00 */ + unsigned char reserved0[4]; + unsigned int mode_cfg; /* 0x08 */ + unsigned int cs_reg; /* 0x0c */ + unsigned char reserved1[4]; + unsigned int spi_sts; /* 0x14 */ + unsigned int tx_data; /* 0x18 */ + unsigned int rx_data; /* 0x1c */ + unsigned int pkt_cnt; /* 0x20 */ + unsigned char reserved2[4]; + unsigned char reserved3[4]; + unsigned int fb_clk; /* 0x2c */ + unsigned char padding[0xffd0]; +}; + +#define EXYNOS_SPI_MAX_FREQ 50000000 + +#define SPI_TIMEOUT_MS 10 + +/* SPI_CHCFG */ +#define SPI_CH_HS_EN (1 << 6) +#define SPI_CH_RST (1 << 5) +#define SPI_SLAVE_MODE (1 << 4) +#define SPI_CH_CPOL_L (1 << 3) +#define SPI_CH_CPHA_B (1 << 2) +#define SPI_RX_CH_ON (1 << 1) +#define SPI_TX_CH_ON (1 << 0) + +/* SPI_MODECFG */ +#define SPI_MODE_CH_WIDTH_WORD (0x2 << 29) +#define SPI_MODE_BUS_WIDTH_WORD (0x2 << 17) + +/* SPI_CSREG */ +#define SPI_SLAVE_SIG_INACT (1 << 0) + +/* SPI_STS */ +#define SPI_ST_TX_DONE (1 << 25) +#define SPI_FIFO_LVL_MASK 0x1ff +#define SPI_TX_LVL_OFFSET 6 +#define SPI_RX_LVL_OFFSET 15 + +/* Feedback Delay */ +#define SPI_CLK_BYPASS (0 << 0) +#define SPI_FB_DELAY_90 (1 << 0) +#define SPI_FB_DELAY_180 (2 << 0) +#define SPI_FB_DELAY_270 (3 << 0) + +/* Packet Count */ +#define SPI_PACKET_CNT_EN (1 << 16) + +#endif /* __ASSEMBLY__ */ +#endif diff --git a/arch/arm/include/asm/arch-exynos/sromc.h b/arch/arm/include/asm/arch-exynos/sromc.h index f616bcb37b..dc6aae2c50 100644 --- a/arch/arm/include/asm/arch-exynos/sromc.h +++ b/arch/arm/include/asm/arch-exynos/sromc.h @@ -48,4 +48,22 @@ struct s5p_sromc { /* Configure the Band Width and Bank Control Regs for required SROMC Bank */ void s5p_config_sromc(u32 srom_bank, u32 srom_bw_conf, u32 srom_bc_conf); +enum { + FDT_SROM_PMC, + FDT_SROM_TACP, + FDT_SROM_TAH, + FDT_SROM_TCOH, + FDT_SROM_TACC, + FDT_SROM_TCOS, + FDT_SROM_TACS, + + FDT_SROM_TIMING_COUNT, +}; + +struct fdt_sromc { + u8 bank; /* srom bank number */ + u8 width; /* bus width in bytes */ + unsigned int timing[FDT_SROM_TIMING_COUNT]; /* timing parameters */ +}; + #endif /* __ASM_ARCH_SROMC_H_ */ diff --git a/arch/arm/include/asm/arch-kirkwood/cpu.h b/arch/arm/include/asm/arch-kirkwood/cpu.h index 57bfe8e78b..009a6bb8f3 100644 --- a/arch/arm/include/asm/arch-kirkwood/cpu.h +++ b/arch/arm/include/asm/arch-kirkwood/cpu.h @@ -33,7 +33,7 @@ | (attr << 8) | (kw_winctrl_calcsize(size) << 16)) #define KWGBE_PORT_SERIAL_CONTROL1_REG(_x) \ - ((_x ? KW_EGIGA0_BASE : KW_EGIGA1_BASE) + 0x44c) + ((_x ? KW_EGIGA1_BASE : KW_EGIGA0_BASE) + 0x44c) #define KW_REG_PCIE_DEVID (KW_REG_PCIE_BASE + 0x00) #define KW_REG_PCIE_REVID (KW_REG_PCIE_BASE + 0x08) diff --git a/arch/arm/include/asm/arch-kirkwood/mpp.h b/arch/arm/include/asm/arch-kirkwood/mpp.h index 8ceea7bb88..48d1477fff 100644 --- a/arch/arm/include/asm/arch-kirkwood/mpp.h +++ b/arch/arm/include/asm/arch-kirkwood/mpp.h @@ -312,6 +312,6 @@ #define MPP_MAX 49 -void kirkwood_mpp_conf(u32 *mpp_list, u32 *mpp_save); +void kirkwood_mpp_conf(const u32 *mpp_list, u32 *mpp_save); #endif diff --git a/arch/arm/include/asm/arch-mx25/imx-regs.h b/arch/arm/include/asm/arch-mx25/imx-regs.h index 53aafe3075..5f4b543823 100644 --- a/arch/arm/include/asm/arch-mx25/imx-regs.h +++ b/arch/arm/include/asm/arch-mx25/imx-regs.h @@ -36,10 +36,6 @@ #if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__)) #include <asm/types.h> -#ifdef CONFIG_FEC_MXC -extern void mx25_fec_init_pins(void); -#endif - /* Clock Control Module (CCM) registers */ struct ccm_regs { u32 mpctl; /* Core PLL Control */ @@ -245,6 +241,7 @@ struct aips_regs { #define IMX_RTIC_BASE (0x53FEC000) #define IMX_IIM_BASE (0x53FF0000) #define IMX_USB_BASE (0x53FF4000) +#define IMX_USB_PORT_OFFSET 0x200 #define IMX_CSI_BASE (0x53FF8000) #define IMX_DRYICE_BASE (0x53FFC000) diff --git a/arch/arm/include/asm/arch-mx25/sys_proto.h b/arch/arm/include/asm/arch-mx25/sys_proto.h index 6a01a7b04c..46db341e8a 100644 --- a/arch/arm/include/asm/arch-mx25/sys_proto.h +++ b/arch/arm/include/asm/arch-mx25/sys_proto.h @@ -25,5 +25,8 @@ #define _SYS_PROTO_H_ void mx25_uart1_init_pins(void); +#if defined CONFIG_FEC_MXC +extern void mx25_fec_init_pins(void); +#endif #endif diff --git a/arch/arm/include/asm/arch-mx31/clock.h b/arch/arm/include/asm/arch-mx31/clock.h index 1dbb8dabe9..25c3f70f6c 100644 --- a/arch/arm/include/asm/arch-mx31/clock.h +++ b/arch/arm/include/asm/arch-mx31/clock.h @@ -58,7 +58,5 @@ extern void mx31_set_gpr(enum iomux_gp_func gp, char en); void mx31_uart1_hw_init(void); void mx31_uart2_hw_init(void); void mx31_spi2_hw_init(void); -void mxc_hw_watchdog_enable(void); -void mxc_hw_watchdog_reset(void); #endif /* __ASM_ARCH_CLOCK_H */ diff --git a/arch/arm/include/asm/arch-mx31/imx-regs.h b/arch/arm/include/asm/arch-mx31/imx-regs.h index 8fd3d08069..3f58318b02 100644 --- a/arch/arm/include/asm/arch-mx31/imx-regs.h +++ b/arch/arm/include/asm/arch-mx31/imx-regs.h @@ -68,17 +68,6 @@ struct cspi_regs { u32 test; }; -/* Watchdog Timer (WDOG) registers */ -#define WDOG_ENABLE (1 << 2) -#define WDOG_WT_SHIFT 8 -#define WDOG_WDZST (1 << 0) - -struct wdog_regs { - u16 wcr; /* Control */ - u16 wsr; /* Service */ - u16 wrsr; /* Reset Status */ -}; - /* IIM Control Registers */ struct iim_regs { u32 iim_stat; @@ -687,7 +676,7 @@ struct esdc_regs { #define ARM_PPMRR 0x40000015 -#define WDOG_BASE 0x53FDC000 +#define WDOG1_BASE_ADDR 0x53FDC000 /* * GPIO @@ -895,32 +884,7 @@ struct esdc_regs { #define MX31_AIPS1_BASE_ADDR 0x43f00000 #define IMX_USB_BASE (MX31_AIPS1_BASE_ADDR + 0x88000) - -/* USB portsc */ -/* values for portsc field */ -#define MXC_EHCI_PHY_LOW_POWER_SUSPEND (1 << 23) -#define MXC_EHCI_FORCE_FS (1 << 24) -#define MXC_EHCI_UTMI_8BIT (0 << 28) -#define MXC_EHCI_UTMI_16BIT (1 << 28) -#define MXC_EHCI_SERIAL (1 << 29) -#define MXC_EHCI_MODE_UTMI (0 << 30) -#define MXC_EHCI_MODE_PHILIPS (1 << 30) -#define MXC_EHCI_MODE_ULPI (2 << 30) -#define MXC_EHCI_MODE_SERIAL (3 << 30) - -/* values for flags field */ -#define MXC_EHCI_INTERFACE_DIFF_UNI (0 << 0) -#define MXC_EHCI_INTERFACE_DIFF_BI (1 << 0) -#define MXC_EHCI_INTERFACE_SINGLE_UNI (2 << 0) -#define MXC_EHCI_INTERFACE_SINGLE_BI (3 << 0) -#define MXC_EHCI_INTERFACE_MASK (0xf) - -#define MXC_EHCI_POWER_PINS_ENABLED (1 << 5) -#define MXC_EHCI_TTL_ENABLED (1 << 6) - -#define MXC_EHCI_INTERNAL_PHY (1 << 7) -#define MXC_EHCI_IPPUE_DOWN (1 << 8) -#define MXC_EHCI_IPPUE_UP (1 << 9) +#define IMX_USB_PORT_OFFSET 0x200 /* * CSPI register definitions diff --git a/arch/arm/include/asm/arch-mx35/imx-regs.h b/arch/arm/include/asm/arch-mx35/imx-regs.h index 7b098094fe..7f337be557 100644 --- a/arch/arm/include/asm/arch-mx35/imx-regs.h +++ b/arch/arm/include/asm/arch-mx35/imx-regs.h @@ -33,6 +33,8 @@ #define IRAM_BASE_ADDR 0x10000000 /* internal ram */ #define IRAM_SIZE 0x00020000 /* 128 KB */ +#define LOW_LEVEL_SRAM_STACK 0x1001E000 + /* * AIPS 1 */ @@ -78,10 +80,12 @@ #define GPIO2_BASE_ADDR 0x53FD0000 #define SDMA_BASE_ADDR 0x53FD4000 #define RTC_BASE_ADDR 0x53FD8000 -#define WDOG_BASE_ADDR 0x53FDC000 +#define WDOG1_BASE_ADDR 0x53FDC000 #define PWM_BASE_ADDR 0x53FE0000 #define RTIC_BASE_ADDR 0x53FEC000 #define IIM_BASE_ADDR 0x53FF0000 +#define IMX_USB_BASE 0x53FF4000 +#define IMX_USB_PORT_OFFSET 0x400 #define IMX_CCM_BASE CCM_BASE_ADDR @@ -288,15 +292,6 @@ struct cspi_regs { u32 test; }; -/* Watchdog Timer (WDOG) registers */ -struct wdog_regs { - u16 wcr; /* Control */ - u16 wsr; /* Service */ - u16 wrsr; /* Reset Status */ - u16 wicr; /* Interrupt Control */ - u16 wmcr; /* Misc Control */ -}; - struct esdc_regs { u32 esdctl0; u32 esdcfg0; diff --git a/arch/arm/include/asm/arch-mx35/mmc_host_def.h b/arch/arm/include/asm/arch-mx35/mmc_host_def.h new file mode 100644 index 0000000000..775b9552ca --- /dev/null +++ b/arch/arm/include/asm/arch-mx35/mmc_host_def.h @@ -0,0 +1,31 @@ +/* + * (C) Copyright 2008 + * Texas Instruments, <www.ti.com> + * Syed Mohammed Khasim <khasim@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation's version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef MMC_HOST_DEF_H +#define MMC_HOST_DEF_H + +/* Driver definitions */ +#define MMCSD_SECTOR_SIZE 512 + +#endif /* MMC_HOST_DEF_H */ diff --git a/arch/arm/include/asm/arch-mx35/spl.h b/arch/arm/include/asm/arch-mx35/spl.h new file mode 100644 index 0000000000..91d11ae847 --- /dev/null +++ b/arch/arm/include/asm/arch-mx35/spl.h @@ -0,0 +1,38 @@ +/* + * (C) Copyright 2012 + * Texas Instruments, <www.ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef _ASM_ARCH_SPL_H_ +#define _ASM_SPL_H_ + +#define BOOT_DEVICE_NONE 0 +#define BOOT_DEVICE_XIP 1 +#define BOOT_DEVICE_XIPWAIT 2 +#define BOOT_DEVICE_NAND 3 +#define BOOT_DEVICE_ONE_NAND 4 +#define BOOT_DEVICE_MMC1 5 +#define BOOT_DEVICE_MMC2 6 +#define BOOT_DEVICE_MMC2_2 7 +#define BOOT_DEVICE_NOR 8 +#define BOOT_DEVICE_I2C 9 +#define BOOT_DEVICE_SPI 10 + +#endif diff --git a/arch/arm/include/asm/arch-mx35/sys_proto.h b/arch/arm/include/asm/arch-mx35/sys_proto.h index 9c0d51321d..aa3549cb0d 100644 --- a/arch/arm/include/asm/arch-mx35/sys_proto.h +++ b/arch/arm/include/asm/arch-mx35/sys_proto.h @@ -25,6 +25,8 @@ #define _SYS_PROTO_H_ u32 get_cpu_rev(void); +void mx3_setup_sdram_bank(u32 start_address, u32 ddr2_config, + u32 row, u32 col, u32 dsize, u32 refresh); #define is_soc_rev(rev) ((get_cpu_rev() & 0xFF) - rev) #endif diff --git a/arch/arm/include/asm/arch-mx5/imx-regs.h b/arch/arm/include/asm/arch-mx5/imx-regs.h index 1d060fd23e..249d15a505 100644 --- a/arch/arm/include/asm/arch-mx5/imx-regs.h +++ b/arch/arm/include/asm/arch-mx5/imx-regs.h @@ -218,16 +218,6 @@ */ #define WBED 1 -/* - * WEIM WCR - */ -#define BCM 1 -#define GBCD(x) (((x) & 0x3) << 1) -#define INTEN (1 << 4) -#define INTPOL (1 << 5) -#define WDOG_EN (1 << 8) -#define WDOG_LIMIT(x) (((x) & 0x3) << 9) - #define CS0_128 0 #define CS0_64M_CS1_64M 1 #define CS0_64M_CS1_32M_CS2_32M 2 diff --git a/arch/arm/include/asm/arch-mx5/mx5x_pins.h b/arch/arm/include/asm/arch-mx5/mx5x_pins.h index 122fbeef6a..3457f6a632 100644 --- a/arch/arm/include/asm/arch-mx5/mx5x_pins.h +++ b/arch/arm/include/asm/arch-mx5/mx5x_pins.h @@ -802,22 +802,22 @@ typedef enum iomux_input_select { MX53_CSPI_IPP_CSPI_CLK_IN_SELECT_INPUT, MX53_CSPI_IPP_IND_MISO_SELECT_INPUT, MX53_CSPI_IPP_IND_MOSI_SELECT_INPUT, + MX53_CSPI_IPP_IND_SS_B_0_SELECT_INPUT, MX53_CSPI_IPP_IND_SS_B_1_SELECT_INPUT, MX53_CSPI_IPP_IND_SS_B_2_SELECT_INPUT, MX53_CSPI_IPP_IND_SS_B_3_SELECT_INPUT, - MX53_CSPI_IPP_IND_SS_B_4_SELECT_INPUT, MX53_ECSPI1_IPP_CSPI_CLK_IN_SELECT_INPUT, MX53_ECSPI1_IPP_IND_MISO_SELECT_INPUT, MX53_ECSPI1_IPP_IND_MOSI_SELECT_INPUT, + MX53_ECSPI1_IPP_IND_SS_B_0_SELECT_INPUT, MX53_ECSPI1_IPP_IND_SS_B_1_SELECT_INPUT, MX53_ECSPI1_IPP_IND_SS_B_2_SELECT_INPUT, MX53_ECSPI1_IPP_IND_SS_B_3_SELECT_INPUT, - MX53_ECSPI1_IPP_IND_SS_B_4_SELECT_INPUT, MX53_ECSPI2_IPP_CSPI_CLK_IN_SELECT_INPUT, MX53_ECSPI2_IPP_IND_MISO_SELECT_INPUT, MX53_ECSPI2_IPP_IND_MOSI_SELECT_INPUT, + MX53_ECSPI2_IPP_IND_SS_B_0_SELECT_INPUT, MX53_ECSPI2_IPP_IND_SS_B_1_SELECT_INPUT, - MX53_ECSPI2_IPP_IND_SS_B_2_SELECT_INPUT, MX53_ESAI1_IPP_IND_FSR_SELECT_INPUT, MX53_ESAI1_IPP_IND_FST_SELECT_INPUT, MX53_ESAI1_IPP_IND_HCKR_SELECT_INPUT, diff --git a/arch/arm/include/asm/arch-mx5/sys_proto.h b/arch/arm/include/asm/arch-mx5/sys_proto.h index 7b5246eea6..93ad1c6b33 100644 --- a/arch/arm/include/asm/arch-mx5/sys_proto.h +++ b/arch/arm/include/asm/arch-mx5/sys_proto.h @@ -24,8 +24,16 @@ #ifndef _SYS_PROTO_H_ #define _SYS_PROTO_H_ -u32 get_cpu_rev(void); +#define MXC_CPU_MX51 0x51 +#define MXC_CPU_MX53 0x53 +#define MXC_CPU_MX6SL 0x60 +#define MXC_CPU_MX6DL 0x61 +#define MXC_CPU_MX6SOLO 0x62 +#define MXC_CPU_MX6Q 0x63 + #define is_soc_rev(rev) ((get_cpu_rev() & 0xFF) - rev) +u32 get_cpu_rev(void); +unsigned imx_ddr_size(void); void sdelay(unsigned long); void set_chipselect_size(int const); diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h b/arch/arm/include/asm/arch-mx6/imx-regs.h index 09ab010138..3eb0081ca8 100644 --- a/arch/arm/include/asm/arch-mx6/imx-regs.h +++ b/arch/arm/include/asm/arch-mx6/imx-regs.h @@ -564,6 +564,8 @@ struct anatop_regs { u32 usb2_misc_clr; /* 0x258 */ u32 usb2_misc_tog; /* 0x25c */ u32 digprog; /* 0x260 */ + u32 reserved1[7]; + u32 digprog_sololite; /* 0x280 */ }; #define ANATOP_PFD_480_PFD0_FRAC_SHIFT 0 diff --git a/arch/arm/include/asm/arch-mx6/mx6dl_pins.h b/arch/arm/include/asm/arch-mx6/mx6dl_pins.h new file mode 100644 index 0000000000..79e2c4f5a4 --- /dev/null +++ b/arch/arm/include/asm/arch-mx6/mx6dl_pins.h @@ -0,0 +1,149 @@ +/* + * Copyright (C) 2012 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + * + */ + +#ifndef __ASM_ARCH_MX6_MX6DL_PINS_H__ +#define __ASM_ARCH_MX6_MX6DL_PINS_H__ + +#include <asm/imx-common/iomux-v3.h> + +/* Use to set PAD control */ +#define PAD_CTL_HYS (1 << 16) +#define PAD_CTL_PUS_100K_DOWN (0 << 14) +#define PAD_CTL_PUS_47K_UP (1 << 14) +#define PAD_CTL_PUS_100K_UP (2 << 14) +#define PAD_CTL_PUS_22K_UP (3 << 14) + +#define PAD_CTL_PUE (1 << 13) +#define PAD_CTL_PKE (1 << 12) +#define PAD_CTL_ODE (1 << 11) +#define PAD_CTL_SPEED_LOW (1 << 6) +#define PAD_CTL_SPEED_MED (2 << 6) +#define PAD_CTL_SPEED_HIGH (3 << 6) +#define PAD_CTL_DSE_DISABLE (0 << 3) +#define PAD_CTL_DSE_240ohm (1 << 3) +#define PAD_CTL_DSE_120ohm (2 << 3) +#define PAD_CTL_DSE_80ohm (3 << 3) +#define PAD_CTL_DSE_60ohm (4 << 3) +#define PAD_CTL_DSE_48ohm (5 << 3) +#define PAD_CTL_DSE_40ohm (6 << 3) +#define PAD_CTL_DSE_34ohm (7 << 3) +#define PAD_CTL_SRE_FAST (1 << 0) +#define PAD_CTL_SRE_SLOW (0 << 0) + +#define IOMUX_CONFIG_SION 0x10 +#define NO_MUX_I 0 +#define NO_PAD_I 0 +enum { + MX6DL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK = IOMUX_PAD(0x03B0, 0x009C, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6DL_PAD_DI0_PIN15__IPU1_DI0_PIN15 = IOMUX_PAD(0x03B4, 0x00A0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6DL_PAD_DI0_PIN2__IPU1_DI0_PIN2 = IOMUX_PAD(0x03B8, 0x00A4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6DL_PAD_DI0_PIN3__IPU1_DI0_PIN3 = IOMUX_PAD(0x03BC, 0x00A8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6DL_PAD_DI0_PIN4__GPIO_4_20 = IOMUX_PAD(0x03C0, 0x00AC, 5, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6DL_PAD_DISP0_DAT0__IPU1_DISP0_DAT_0 = IOMUX_PAD(0x03C4, 0x00B0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6DL_PAD_DISP0_DAT1__IPU1_DISP0_DAT_1 = IOMUX_PAD(0x03C8, 0x00B4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6DL_PAD_DISP0_DAT10__IPU1_DISP0_DAT_10 = IOMUX_PAD(0x03CC, 0x00B8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6DL_PAD_DISP0_DAT11__IPU1_DISP0_DAT_11 = IOMUX_PAD(0x03D0, 0x00BC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6DL_PAD_DISP0_DAT12__IPU1_DISP0_DAT_12 = IOMUX_PAD(0x03D4, 0x00C0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6DL_PAD_DISP0_DAT13__IPU1_DISP0_DAT_13 = IOMUX_PAD(0x03D8, 0x00C4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6DL_PAD_DISP0_DAT14__IPU1_DISP0_DAT_14 = IOMUX_PAD(0x03DC, 0x00C8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6DL_PAD_DISP0_DAT15__IPU1_DISP0_DAT_15 = IOMUX_PAD(0x03E0, 0x00CC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6DL_PAD_DISP0_DAT16__IPU1_DISP0_DAT_16 = IOMUX_PAD(0x03E4, 0x00D0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6DL_PAD_DISP0_DAT17__IPU1_DISP0_DAT_17 = IOMUX_PAD(0x03E8, 0x00D4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6DL_PAD_DISP0_DAT18__IPU1_DISP0_DAT_18 = IOMUX_PAD(0x03EC, 0x00D8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6DL_PAD_DISP0_DAT19__IPU1_DISP0_DAT_19 = IOMUX_PAD(0x03F0, 0x00DC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6DL_PAD_DISP0_DAT2__IPU1_DISP0_DAT_2 = IOMUX_PAD(0x03F4, 0x00E0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6DL_PAD_DISP0_DAT20__IPU1_DISP0_DAT_20 = IOMUX_PAD(0x03F8, 0x00E4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6DL_PAD_DISP0_DAT21__IPU1_DISP0_DAT_21 = IOMUX_PAD(0x03FC, 0x00E8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6DL_PAD_DISP0_DAT22__IPU1_DISP0_DAT_22 = IOMUX_PAD(0x0400, 0x00EC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6DL_PAD_DISP0_DAT23__IPU1_DISP0_DAT_23 = IOMUX_PAD(0x0404, 0x00F0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6DL_PAD_DISP0_DAT3__IPU1_DISP0_DAT_3 = IOMUX_PAD(0x0408, 0x00F4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6DL_PAD_DISP0_DAT4__IPU1_DISP0_DAT_4 = IOMUX_PAD(0x040C, 0x00F8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6DL_PAD_DISP0_DAT5__IPU1_DISP0_DAT_5 = IOMUX_PAD(0x0410, 0x00FC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6DL_PAD_DISP0_DAT6__IPU1_DISP0_DAT_6 = IOMUX_PAD(0x0414, 0x0100, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6DL_PAD_DISP0_DAT7__IPU1_DISP0_DAT_7 = IOMUX_PAD(0x0418, 0x0104, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6DL_PAD_DISP0_DAT8__IPU1_DISP0_DAT_8 = IOMUX_PAD(0x041C, 0x0108, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6DL_PAD_DISP0_DAT9__IPU1_DISP0_DAT_9 = IOMUX_PAD(0x0420, 0x010C, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6DL_PAD_EIM_D16__ECSPI1_SCLK = IOMUX_PAD(0x0514, 0x0144, 1, 0x07D8, 2, 0), + MX6DL_PAD_EIM_D17__ECSPI1_MISO = IOMUX_PAD(0x0518, 0x0148, 1, 0x07DC, 2, 0), + MX6DL_PAD_EIM_D18__ECSPI1_MOSI = IOMUX_PAD(0x051C, 0x014C, 1, 0x07E0, 2, 0), + MX6DL_PAD_EIM_D19__GPIO_3_19 = IOMUX_PAD(0x0520, 0x0150, 5, 0x0000, 0, 0), + MX6DL_PAD_EIM_D21__GPIO_3_21 = IOMUX_PAD(0x0528, 0x0158, 5, 0x0000, 0, 0), + MX6DL_PAD_EIM_D21__I2C1_SCL = IOMUX_PAD(0x0528, 0x0158, 6 | IOMUX_CONFIG_SION, 0x0868, 1, 0), + MX6DL_PAD_EIM_D23__GPIO_3_23 = IOMUX_PAD(0x0530, 0x0160, 5, 0x0000, 0, 0), + MX6DL_PAD_EIM_D26__UART2_TXD = IOMUX_PAD(0x053C, 0x016C, 4, 0x0000, 0, 0), + MX6DL_PAD_EIM_D27__UART2_RXD = IOMUX_PAD(0x0540, 0x0170, 4, 0x0904, 1, 0), + MX6DL_PAD_EIM_D28__I2C1_SDA = IOMUX_PAD(0x0544, 0x0174, 1 | IOMUX_CONFIG_SION, 0x086C, 1, 0), + MX6DL_PAD_EIM_D28__GPIO_3_28 = IOMUX_PAD(0x0544, 0x0174, 5, 0x0000, 0, 0), + MX6DL_PAD_ENET_MDC__ENET_MDC = IOMUX_PAD(0x05B8, 0x01E8, 1, 0x0000, 0, 0), + MX6DL_PAD_ENET_MDIO__ENET_MDIO = IOMUX_PAD(0x05BC, 0x01EC, 1, 0x0810, 0, 0), + MX6DL_PAD_ENET_REF_CLK__ENET_TX_CLK = IOMUX_PAD(0x05C0, 0x01F0, 1, 0x0000, 0, 0), + MX6DL_PAD_ENET_RXD0__GPIO_1_27 = IOMUX_PAD(0x05C8, 0x01F8, 5, 0x0000, 0, 0), + MX6DL_PAD_GPIO_16__GPIO_7_11 = IOMUX_PAD(0x05E4, 0x0214, 5, 0x0000, 0, 0), + MX6DL_PAD_GPIO_16__I2C3_SDA = IOMUX_PAD(0x05E4, 0x0214, 6 | IOMUX_CONFIG_SION, 0x087C, 1, 0), + MX6DL_PAD_GPIO_17__GPIO_7_12 = IOMUX_PAD(0x05E8, 0x0218, 5, 0x0000, 0, 0), + MX6DL_PAD_GPIO_18__GPIO_7_13 = IOMUX_PAD(0x05EC, 0x021C, 5, 0x0000, 0, 0), + MX6DL_PAD_GPIO_19__GPIO_4_5 = IOMUX_PAD(0x05F0, 0x0220, 5, 0x0000, 0, 0), + MX6DL_PAD_GPIO_5__GPIO_1_5 = IOMUX_PAD(0x0600, 0x0230, 5, 0x0000, 0, 0), + MX6DL_PAD_GPIO_5__I2C3_SCL = IOMUX_PAD(0x0600, 0x0230, 6 | IOMUX_CONFIG_SION, 0x0878, 2, 0), + MX6DL_PAD_KEY_COL3__I2C2_SCL = IOMUX_PAD(0x0638, 0x0250, 4 | IOMUX_CONFIG_SION, 0x0870, 1, 0), + MX6DL_PAD_KEY_COL3__GPIO_4_12 = IOMUX_PAD(0x0638, 0x0250, 5, 0x0000, 0, 0), + MX6DL_PAD_KEY_ROW3__I2C2_SDA = IOMUX_PAD(0x064C, 0x0264, 4 | IOMUX_CONFIG_SION, 0x0874, 1, 0), + MX6DL_PAD_KEY_ROW3__GPIO_4_13 = IOMUX_PAD(0x064C, 0x0264, 5, 0x0000, 0, 0), + MX6DL_PAD_NANDF_D1__GPIO_2_1 = IOMUX_PAD(0x0670, 0x0288, 5, 0x0000, 0, 0), + MX6DL_PAD_NANDF_D2__GPIO_2_2 = IOMUX_PAD(0x0674, 0x028C, 5, 0x0000, 0, 0), + MX6DL_PAD_NANDF_D3__GPIO_2_3 = IOMUX_PAD(0x0678, 0x0290, 5, 0x0000, 0, 0), + MX6DL_PAD_NANDF_D4__GPIO_2_4 = IOMUX_PAD(0x067C, 0x0294, 5, 0x0000, 0, 0), + MX6DL_PAD_NANDF_D6__GPIO_2_6 = IOMUX_PAD(0x0684, 0x029C, 5, 0x0000, 0, 0), + MX6DL_PAD_RGMII_RD0__ENET_RGMII_RD0 = IOMUX_PAD(0x0694, 0x02AC, 1, 0x0818, 1, 0), + MX6DL_PAD_RGMII_RD0__GPIO_6_25 = IOMUX_PAD(0x0694, 0x02AC, 5, 0x0000, 0, 0), + MX6DL_PAD_RGMII_RD1__ENET_RGMII_RD1 = IOMUX_PAD(0x0698, 0x02B0, 1, 0x081C, 1, 0), + MX6DL_PAD_RGMII_RD1__GPIO_6_27 = IOMUX_PAD(0x0698, 0x02B0, 5, 0x0000, 0, 0), + MX6DL_PAD_RGMII_RD2__ENET_RGMII_RD2 = IOMUX_PAD(0x069C, 0x02B4, 1, 0x0820, 1, 0), + MX6DL_PAD_RGMII_RD2__GPIO_6_28 = IOMUX_PAD(0x069C, 0x02B4, 5, 0x0000, 0, 0), + MX6DL_PAD_RGMII_RD3__ENET_RGMII_RD3 = IOMUX_PAD(0x06A0, 0x02B8, 1, 0x0824, 1, 0), + MX6DL_PAD_RGMII_RD3__GPIO_6_29 = IOMUX_PAD(0x06A0, 0x02B8, 5, 0x0000, 0, 0), + MX6DL_PAD_RGMII_RX_CTL__RGMII_RX_CTL = IOMUX_PAD(0x06A4, 0x02BC, 1, 0x0828, 1, 0), + MX6DL_PAD_RGMII_RX_CTL__GPIO_6_24 = IOMUX_PAD(0x06A4, 0x02BC, 5, 0x0000, 0, 0), + MX6DL_PAD_RGMII_RXC__ENET_RGMII_RXC = IOMUX_PAD(0x06A8, 0x02C0, 1, 0x0814, 1, 0), + MX6DL_PAD_RGMII_RXC__GPIO_6_30 = IOMUX_PAD(0x06A8, 0x02C0, 5, 0x0000, 0, 0), + MX6DL_PAD_RGMII_TD0__ENET_RGMII_TD0 = IOMUX_PAD(0x06AC, 0x02C4, 1, 0x0000, 0, 0), + MX6DL_PAD_RGMII_TD1__ENET_RGMII_TD1 = IOMUX_PAD(0x06B0, 0x02C8, 1, 0x0000, 0, 0), + MX6DL_PAD_RGMII_TD2__ENET_RGMII_TD2 = IOMUX_PAD(0x06B4, 0x02CC, 1, 0x0000, 0, 0), + MX6DL_PAD_RGMII_TD3__ENET_RGMII_TD3 = IOMUX_PAD(0x06B8, 0x02D0, 1, 0x0000, 0, 0), + MX6DL_PAD_RGMII_TX_CTL__RGMII_TX_CTL = IOMUX_PAD(0x06BC, 0x02D4, 1, 0x0000, 0, 0), + MX6DL_PAD_RGMII_TXC__ENET_RGMII_TXC = IOMUX_PAD(0x06C0, 0x02D8, 1, 0x0000, 0, 0), + MX6DL_PAD_SD1_CMD__GPIO_1_18 = IOMUX_PAD(0x06C8, 0x02E0, 5, 0x0000, 0, 0), + MX6DL_PAD_SD1_DAT3__GPIO_1_21 = IOMUX_PAD(0x06D8, 0x02F0, 5, 0x0000, 0, 0), + MX6DL_PAD_SD3_CLK__USDHC3_CLK = IOMUX_PAD(0x06F4, 0x030C, 0, 0x0934, 1, 0), + MX6DL_PAD_SD3_CMD__USDHC3_CMD = IOMUX_PAD(0x06F8, 0x0310, 0 | IOMUX_CONFIG_SION, 0x0000, 0, 0), + MX6DL_PAD_SD3_DAT0__USDHC3_DAT0 = IOMUX_PAD(0x06FC, 0x0314, 0, 0x0000, 0, 0), + MX6DL_PAD_SD3_DAT1__USDHC3_DAT1 = IOMUX_PAD(0x0700, 0x0318, 0, 0x0000, 0, 0), + MX6DL_PAD_SD3_DAT2__USDHC3_DAT2 = IOMUX_PAD(0x0704, 0x031C, 0, 0x0000, 0, 0), + MX6DL_PAD_SD3_DAT3__USDHC3_DAT3 = IOMUX_PAD(0x0708, 0x0320, 0, 0x0000, 0, 0), + MX6DL_PAD_SD3_DAT5__GPIO_7_0 = IOMUX_PAD(0x0710, 0x0328, 5, 0x0000, 0, 0), + MX6DL_PAD_SD3_DAT6__UART1_RXD = IOMUX_PAD(0x0714, 0x032C, 1, 0x08FC, 2, 0), + MX6DL_PAD_SD3_DAT7__UART1_TXD = IOMUX_PAD(0x0718, 0x0330, 1, 0x0000, 0, 0), + MX6DL_PAD_SD4_CLK__USDHC4_CLK = IOMUX_PAD(0x0720, 0x0338, 0, 0x0938, 1, 0), + MX6DL_PAD_SD4_CMD__USDHC4_CMD = IOMUX_PAD(0x0724, 0x033C, 0 | IOMUX_CONFIG_SION, 0x0000, 0, 0), + MX6DL_PAD_SD4_DAT0__USDHC4_DAT0 = IOMUX_PAD(0x0728, 0x0340, 1, 0x0000, 0, 0), + MX6DL_PAD_SD4_DAT1__USDHC4_DAT1 = IOMUX_PAD(0x072C, 0x0344, 1, 0x0000, 0, 0), + MX6DL_PAD_SD4_DAT2__USDHC4_DAT2 = IOMUX_PAD(0x0730, 0x0348, 1, 0x0000, 0, 0), + MX6DL_PAD_SD4_DAT3__USDHC4_DAT3 = IOMUX_PAD(0x0734, 0x034C, 1, 0x0000, 0, 0), +}; +#endif /* __ASM_ARCH_MX6_MX6DL_PINS_H__ */ diff --git a/arch/arm/include/asm/arch-mx6/sys_proto.h b/arch/arm/include/asm/arch-mx6/sys_proto.h index 711b30dfe2..3193297610 100644 --- a/arch/arm/include/asm/arch-mx6/sys_proto.h +++ b/arch/arm/include/asm/arch-mx6/sys_proto.h @@ -24,9 +24,17 @@ #ifndef _SYS_PROTO_H_ #define _SYS_PROTO_H_ -#define is_soc_rev(rev) ((get_cpu_rev() & 0xFF) - rev) +#define MXC_CPU_MX51 0x51 +#define MXC_CPU_MX53 0x53 +#define MXC_CPU_MX6SL 0x60 +#define MXC_CPU_MX6DL 0x61 +#define MXC_CPU_MX6SOLO 0x62 +#define MXC_CPU_MX6Q 0x63 +#define is_soc_rev(rev) ((get_cpu_rev() & 0xFF) - rev) u32 get_cpu_rev(void); +const char *get_imx_type(u32 imxtype); +unsigned imx_ddr_size(void); void set_vddsoc(u32 mv); diff --git a/arch/arm/include/asm/arch-mxs/imx-regs.h b/arch/arm/include/asm/arch-mxs/imx-regs.h index 5e1901e6c4..9764041b48 100644 --- a/arch/arm/include/asm/arch-mxs/imx-regs.h +++ b/arch/arm/include/asm/arch-mxs/imx-regs.h @@ -26,7 +26,6 @@ #include <asm/arch/regs-apbh.h> #include <asm/arch/regs-base.h> #include <asm/arch/regs-bch.h> -#include <asm/arch/regs-clkctrl-mx28.h> #include <asm/arch/regs-digctl.h> #include <asm/arch/regs-gpmi.h> #include <asm/arch/regs-i2c.h> @@ -34,9 +33,13 @@ #include <asm/arch/regs-lradc.h> #include <asm/arch/regs-ocotp.h> #include <asm/arch/regs-pinctrl.h> -#include <asm/arch/regs-power.h> #include <asm/arch/regs-rtc.h> #include <asm/arch/regs-ssp.h> #include <asm/arch/regs-timrot.h> +#ifdef CONFIG_MX28 +#include <asm/arch/regs-clkctrl-mx28.h> +#include <asm/arch/regs-power-mx28.h> +#endif + #endif /* __IMX_REGS_H__ */ diff --git a/arch/arm/include/asm/arch-mxs/regs-clkctrl-mx28.h b/arch/arm/include/asm/arch-mxs/regs-clkctrl-mx28.h index b662fbe440..23e9adc25a 100644 --- a/arch/arm/include/asm/arch-mxs/regs-clkctrl-mx28.h +++ b/arch/arm/include/asm/arch-mxs/regs-clkctrl-mx28.h @@ -31,9 +31,11 @@ #ifndef __ASSEMBLY__ struct mxs_clkctrl_regs { mxs_reg_32(hw_clkctrl_pll0ctrl0) /* 0x00 */ - mxs_reg_32(hw_clkctrl_pll0ctrl1) /* 0x10 */ + uint32_t hw_clkctrl_pll0ctrl1; /* 0x10 */ + uint32_t reserved_pll0ctrl1[3]; /* 0x14-0x1c */ mxs_reg_32(hw_clkctrl_pll1ctrl0) /* 0x20 */ - mxs_reg_32(hw_clkctrl_pll1ctrl1) /* 0x30 */ + uint32_t hw_clkctrl_pll1ctrl1; /* 0x30 */ + uint32_t reserved_pll1ctrl1[3]; /* 0x34-0x3c */ mxs_reg_32(hw_clkctrl_pll2ctrl0) /* 0x40 */ mxs_reg_32(hw_clkctrl_cpu) /* 0x50 */ mxs_reg_32(hw_clkctrl_hbus) /* 0x60 */ diff --git a/arch/arm/include/asm/arch-mxs/regs-power.h b/arch/arm/include/asm/arch-mxs/regs-power-mx28.h index a46a372682..257ee88e82 100644 --- a/arch/arm/include/asm/arch-mxs/regs-power.h +++ b/arch/arm/include/asm/arch-mxs/regs-power-mx28.h @@ -128,7 +128,7 @@ struct mxs_power_regs { #define POWER_MINPWR_PWD_ANA_CMPS (1 << 10) #define POWER_MINPWR_ENABLE_OSC (1 << 9) #define POWER_MINPWR_SELECT_OSC (1 << 8) -#define POWER_MINPWR_FBG_OFF (1 << 7) +#define POWER_MINPWR_VBG_OFF (1 << 7) #define POWER_MINPWR_DOUBLE_FETS (1 << 6) #define POWER_MINPWR_HALFFETS (1 << 5) #define POWER_MINPWR_LESSANA_I (1 << 4) @@ -268,7 +268,7 @@ struct mxs_power_regs { #define POWER_DCLIMITS_POSLIMIT_BUCK_MASK (0x7f << 8) #define POWER_DCLIMITS_POSLIMIT_BUCK_OFFSET 8 #define POWER_DCLIMITS_NEGLIMIT_MASK 0x7f -#define POWER_DCLIMITS_NETLIMIT_OFFSET 0 +#define POWER_DCLIMITS_NEGLIMIT_OFFSET 0 #define POWER_LOOPCTRL_TOGGLE_DIF (1 << 20) #define POWER_LOOPCTRL_HYST_SIGN (1 << 19) diff --git a/arch/arm/include/asm/arch-omap3/sys_proto.h b/arch/arm/include/asm/arch-omap3/sys_proto.h index 9e52b12aa2..d60f2addb2 100644 --- a/arch/arm/include/asm/arch-omap3/sys_proto.h +++ b/arch/arm/include/asm/arch-omap3/sys_proto.h @@ -32,6 +32,15 @@ struct emu_hal_params { u32 param1; }; +/* Board SDRC timing values */ +struct board_sdrc_timings { + u32 mcfg; + u32 ctrla; + u32 ctrlb; + u32 rfr_ctrl; + u32 mr; +}; + void prcm_init(void); void per_clocks_enable(void); void ehci_clocks_enable(void); @@ -39,8 +48,8 @@ void ehci_clocks_enable(void); void memif_init(void); void sdrc_init(void); void do_sdrc_init(u32, u32); -void get_board_mem_timings(u32 *mcfg, u32 *ctrla, u32 *ctrlb, u32 *rfr_ctrl, - u32 *mr); + +void get_board_mem_timings(struct board_sdrc_timings *timings); void identify_nand_chip(int *mfr, int *id); void emif4_init(void); void gpmc_init(void); diff --git a/arch/arm/include/asm/arch-s5pc1xx/gpio.h b/arch/arm/include/asm/arch-s5pc1xx/gpio.h index 76b901b397..00e498d834 100644 --- a/arch/arm/include/asm/arch-s5pc1xx/gpio.h +++ b/arch/arm/include/asm/arch-s5pc1xx/gpio.h @@ -143,7 +143,12 @@ static inline unsigned int s5p_gpio_base(int nr) return S5PC110_GPIO_BASE; } -#define s5pc110_gpio_get_nr(bank, pin) \ +static inline unsigned int s5p_gpio_part_max(int nr) +{ + return 0; +} + +#define s5pc110_gpio_get_nr(bank, pin) \ ((((((unsigned int)&(((struct s5pc110_gpio *)S5PC110_GPIO_BASE)->bank))\ - S5PC110_GPIO_BASE) / sizeof(struct s5p_gpio_bank)) \ * GPIO_PER_BANK) + pin) diff --git a/arch/arm/include/asm/arch-tegra20/dc.h b/arch/arm/include/asm/arch-tegra20/dc.h new file mode 100644 index 0000000000..37934e1c6c --- /dev/null +++ b/arch/arm/include/asm/arch-tegra20/dc.h @@ -0,0 +1,545 @@ +/* + * (C) Copyright 2010 + * NVIDIA Corporation <www.nvidia.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __ASM_ARCH_TEGRA_DC_H +#define __ASM_ARCH_TEGRA_DC_H + +/* Register definitions for the Tegra display controller */ + +/* CMD register 0x000 ~ 0x43 */ +struct dc_cmd_reg { + /* Address 0x000 ~ 0x002 */ + uint gen_incr_syncpt; /* _CMD_GENERAL_INCR_SYNCPT_0 */ + uint gen_incr_syncpt_ctrl; /* _CMD_GENERAL_INCR_SYNCPT_CNTRL_0 */ + uint gen_incr_syncpt_err; /* _CMD_GENERAL_INCR_SYNCPT_ERROR_0 */ + + uint reserved0[5]; /* reserved_0[5] */ + + /* Address 0x008 ~ 0x00a */ + uint win_a_incr_syncpt; /* _CMD_WIN_A_INCR_SYNCPT_0 */ + uint win_a_incr_syncpt_ctrl; /* _CMD_WIN_A_INCR_SYNCPT_CNTRL_0 */ + uint win_a_incr_syncpt_err; /* _CMD_WIN_A_INCR_SYNCPT_ERROR_0 */ + + uint reserved1[5]; /* reserved_1[5] */ + + /* Address 0x010 ~ 0x012 */ + uint win_b_incr_syncpt; /* _CMD_WIN_B_INCR_SYNCPT_0 */ + uint win_b_incr_syncpt_ctrl; /* _CMD_WIN_B_INCR_SYNCPT_CNTRL_0 */ + uint win_b_incr_syncpt_err; /* _CMD_WIN_B_INCR_SYNCPT_ERROR_0 */ + + uint reserved2[5]; /* reserved_2[5] */ + + /* Address 0x018 ~ 0x01a */ + uint win_c_incr_syncpt; /* _CMD_WIN_C_INCR_SYNCPT_0 */ + uint win_c_incr_syncpt_ctrl; /* _CMD_WIN_C_INCR_SYNCPT_CNTRL_0 */ + uint win_c_incr_syncpt_err; /* _CMD_WIN_C_INCR_SYNCPT_ERROR_0 */ + + uint reserved3[13]; /* reserved_3[13] */ + + /* Address 0x028 */ + uint cont_syncpt_vsync; /* _CMD_CONT_SYNCPT_VSYNC_0 */ + + uint reserved4[7]; /* reserved_4[7] */ + + /* Address 0x030 ~ 0x033 */ + uint ctxsw; /* _CMD_CTXSW_0 */ + uint disp_cmd_opt0; /* _CMD_DISPLAY_COMMAND_OPTION0_0 */ + uint disp_cmd; /* _CMD_DISPLAY_COMMAND_0 */ + uint sig_raise; /* _CMD_SIGNAL_RAISE_0 */ + + uint reserved5[2]; /* reserved_0[2] */ + + /* Address 0x036 ~ 0x03e */ + uint disp_pow_ctrl; /* _CMD_DISPLAY_POWER_CONTROL_0 */ + uint int_stat; /* _CMD_INT_STATUS_0 */ + uint int_mask; /* _CMD_INT_MASK_0 */ + uint int_enb; /* _CMD_INT_ENABLE_0 */ + uint int_type; /* _CMD_INT_TYPE_0 */ + uint int_polarity; /* _CMD_INT_POLARITY_0 */ + uint sig_raise1; /* _CMD_SIGNAL_RAISE1_0 */ + uint sig_raise2; /* _CMD_SIGNAL_RAISE2_0 */ + uint sig_raise3; /* _CMD_SIGNAL_RAISE3_0 */ + + uint reserved6; /* reserved_6 */ + + /* Address 0x040 ~ 0x043 */ + uint state_access; /* _CMD_STATE_ACCESS_0 */ + uint state_ctrl; /* _CMD_STATE_CONTROL_0 */ + uint disp_win_header; /* _CMD_DISPLAY_WINDOW_HEADER_0 */ + uint reg_act_ctrl; /* _CMD_REG_ACT_CONTROL_0 */ +}; + +enum { + PIN_REG_COUNT = 4, + PIN_OUTPUT_SEL_COUNT = 7, +}; + +/* COM register 0x300 ~ 0x329 */ +struct dc_com_reg { + /* Address 0x300 ~ 0x301 */ + uint crc_ctrl; /* _COM_CRC_CONTROL_0 */ + uint crc_checksum; /* _COM_CRC_CHECKSUM_0 */ + + /* _COM_PIN_OUTPUT_ENABLE0/1/2/3_0: Address 0x302 ~ 0x305 */ + uint pin_output_enb[PIN_REG_COUNT]; + + /* _COM_PIN_OUTPUT_POLARITY0/1/2/3_0: Address 0x306 ~ 0x309 */ + uint pin_output_polarity[PIN_REG_COUNT]; + + /* _COM_PIN_OUTPUT_DATA0/1/2/3_0: Address 0x30a ~ 0x30d */ + uint pin_output_data[PIN_REG_COUNT]; + + /* _COM_PIN_INPUT_ENABLE0_0: Address 0x30e ~ 0x311 */ + uint pin_input_enb[PIN_REG_COUNT]; + + /* Address 0x312 ~ 0x313 */ + uint pin_input_data0; /* _COM_PIN_INPUT_DATA0_0 */ + uint pin_input_data1; /* _COM_PIN_INPUT_DATA1_0 */ + + /* _COM_PIN_OUTPUT_SELECT0/1/2/3/4/5/6_0: Address 0x314 ~ 0x31a */ + uint pin_output_sel[PIN_OUTPUT_SEL_COUNT]; + + /* Address 0x31b ~ 0x329 */ + uint pin_misc_ctrl; /* _COM_PIN_MISC_CONTROL_0 */ + uint pm0_ctrl; /* _COM_PM0_CONTROL_0 */ + uint pm0_duty_cycle; /* _COM_PM0_DUTY_CYCLE_0 */ + uint pm1_ctrl; /* _COM_PM1_CONTROL_0 */ + uint pm1_duty_cycle; /* _COM_PM1_DUTY_CYCLE_0 */ + uint spi_ctrl; /* _COM_SPI_CONTROL_0 */ + uint spi_start_byte; /* _COM_SPI_START_BYTE_0 */ + uint hspi_wr_data_ab; /* _COM_HSPI_WRITE_DATA_AB_0 */ + uint hspi_wr_data_cd; /* _COM_HSPI_WRITE_DATA_CD */ + uint hspi_cs_dc; /* _COM_HSPI_CS_DC_0 */ + uint scratch_reg_a; /* _COM_SCRATCH_REGISTER_A_0 */ + uint scratch_reg_b; /* _COM_SCRATCH_REGISTER_B_0 */ + uint gpio_ctrl; /* _COM_GPIO_CTRL_0 */ + uint gpio_debounce_cnt; /* _COM_GPIO_DEBOUNCE_COUNTER_0 */ + uint crc_checksum_latched; /* _COM_CRC_CHECKSUM_LATCHED_0 */ +}; + +enum dc_disp_h_pulse_pos { + H_PULSE0_POSITION_A, + H_PULSE0_POSITION_B, + H_PULSE0_POSITION_C, + H_PULSE0_POSITION_D, + H_PULSE0_POSITION_COUNT, +}; + +struct _disp_h_pulse { + /* _DISP_H_PULSE0/1/2_CONTROL_0 */ + uint h_pulse_ctrl; + /* _DISP_H_PULSE0/1/2_POSITION_A/B/C/D_0 */ + uint h_pulse_pos[H_PULSE0_POSITION_COUNT]; +}; + +enum dc_disp_v_pulse_pos { + V_PULSE0_POSITION_A, + V_PULSE0_POSITION_B, + V_PULSE0_POSITION_C, + V_PULSE0_POSITION_COUNT, +}; + +struct _disp_v_pulse0 { + /* _DISP_H_PULSE0/1_CONTROL_0 */ + uint v_pulse_ctrl; + /* _DISP_H_PULSE0/1_POSITION_A/B/C_0 */ + uint v_pulse_pos[V_PULSE0_POSITION_COUNT]; +}; + +struct _disp_v_pulse2 { + /* _DISP_H_PULSE2/3_CONTROL_0 */ + uint v_pulse_ctrl; + /* _DISP_H_PULSE2/3_POSITION_A_0 */ + uint v_pulse_pos_a; +}; + +enum dc_disp_h_pulse_reg { + H_PULSE0, + H_PULSE1, + H_PULSE2, + H_PULSE_COUNT, +}; + +enum dc_disp_pp_select { + PP_SELECT_A, + PP_SELECT_B, + PP_SELECT_C, + PP_SELECT_D, + PP_SELECT_COUNT, +}; + +/* DISP register 0x400 ~ 0x4c1 */ +struct dc_disp_reg { + /* Address 0x400 ~ 0x40a */ + uint disp_signal_opt0; /* _DISP_DISP_SIGNAL_OPTIONS0_0 */ + uint disp_signal_opt1; /* _DISP_DISP_SIGNAL_OPTIONS1_0 */ + uint disp_win_opt; /* _DISP_DISP_WIN_OPTIONS_0 */ + uint mem_high_pri; /* _DISP_MEM_HIGH_PRIORITY_0 */ + uint mem_high_pri_timer; /* _DISP_MEM_HIGH_PRIORITY_TIMER_0 */ + uint disp_timing_opt; /* _DISP_DISP_TIMING_OPTIONS_0 */ + uint ref_to_sync; /* _DISP_REF_TO_SYNC_0 */ + uint sync_width; /* _DISP_SYNC_WIDTH_0 */ + uint back_porch; /* _DISP_BACK_PORCH_0 */ + uint disp_active; /* _DISP_DISP_ACTIVE_0 */ + uint front_porch; /* _DISP_FRONT_PORCH_0 */ + + /* Address 0x40b ~ 0x419: _DISP_H_PULSE0/1/2_ */ + struct _disp_h_pulse h_pulse[H_PULSE_COUNT]; + + /* Address 0x41a ~ 0x421 */ + struct _disp_v_pulse0 v_pulse0; /* _DISP_V_PULSE0_ */ + struct _disp_v_pulse0 v_pulse1; /* _DISP_V_PULSE1_ */ + + /* Address 0x422 ~ 0x425 */ + struct _disp_v_pulse2 v_pulse3; /* _DISP_V_PULSE2_ */ + struct _disp_v_pulse2 v_pulse4; /* _DISP_V_PULSE3_ */ + + /* Address 0x426 ~ 0x429 */ + uint m0_ctrl; /* _DISP_M0_CONTROL_0 */ + uint m1_ctrl; /* _DISP_M1_CONTROL_0 */ + uint di_ctrl; /* _DISP_DI_CONTROL_0 */ + uint pp_ctrl; /* _DISP_PP_CONTROL_0 */ + + /* Address 0x42a ~ 0x42d: _DISP_PP_SELECT_A/B/C/D_0 */ + uint pp_select[PP_SELECT_COUNT]; + + /* Address 0x42e ~ 0x435 */ + uint disp_clk_ctrl; /* _DISP_DISP_CLOCK_CONTROL_0 */ + uint disp_interface_ctrl; /* _DISP_DISP_INTERFACE_CONTROL_0 */ + uint disp_color_ctrl; /* _DISP_DISP_COLOR_CONTROL_0 */ + uint shift_clk_opt; /* _DISP_SHIFT_CLOCK_OPTIONS_0 */ + uint data_enable_opt; /* _DISP_DATA_ENABLE_OPTIONS_0 */ + uint serial_interface_opt; /* _DISP_SERIAL_INTERFACE_OPTIONS_0 */ + uint lcd_spi_opt; /* _DISP_LCD_SPI_OPTIONS_0 */ + uint border_color; /* _DISP_BORDER_COLOR_0 */ + + /* Address 0x436 ~ 0x439 */ + uint color_key0_lower; /* _DISP_COLOR_KEY0_LOWER_0 */ + uint color_key0_upper; /* _DISP_COLOR_KEY0_UPPER_0 */ + uint color_key1_lower; /* _DISP_COLOR_KEY1_LOWER_0 */ + uint color_key1_upper; /* _DISP_COLOR_KEY1_UPPER_0 */ + + uint reserved0[2]; /* reserved_0[2] */ + + /* Address 0x43c ~ 0x442 */ + uint cursor_foreground; /* _DISP_CURSOR_FOREGROUND_0 */ + uint cursor_background; /* _DISP_CURSOR_BACKGROUND_0 */ + uint cursor_start_addr; /* _DISP_CURSOR_START_ADDR_0 */ + uint cursor_start_addr_ns; /* _DISP_CURSOR_START_ADDR_NS_0 */ + uint cursor_pos; /* _DISP_CURSOR_POSITION_0 */ + uint cursor_pos_ns; /* _DISP_CURSOR_POSITION_NS_0 */ + uint seq_ctrl; /* _DISP_INIT_SEQ_CONTROL_0 */ + + /* Address 0x442 ~ 0x446 */ + uint spi_init_seq_data_a; /* _DISP_SPI_INIT_SEQ_DATA_A_0 */ + uint spi_init_seq_data_b; /* _DISP_SPI_INIT_SEQ_DATA_B_0 */ + uint spi_init_seq_data_c; /* _DISP_SPI_INIT_SEQ_DATA_C_0 */ + uint spi_init_seq_data_d; /* _DISP_SPI_INIT_SEQ_DATA_D_0 */ + + uint reserved1[0x39]; /* reserved1[0x39], */ + + /* Address 0x480 ~ 0x484 */ + uint dc_mccif_fifoctrl; /* _DISP_DC_MCCIF_FIFOCTRL_0 */ + uint mccif_disp0a_hyst; /* _DISP_MCCIF_DISPLAY0A_HYST_0 */ + uint mccif_disp0b_hyst; /* _DISP_MCCIF_DISPLAY0B_HYST_0 */ + uint mccif_disp0c_hyst; /* _DISP_MCCIF_DISPLAY0C_HYST_0 */ + uint mccif_disp1b_hyst; /* _DISP_MCCIF_DISPLAY1B_HYST_0 */ + + uint reserved2[0x3b]; /* reserved2[0x3b] */ + + /* Address 0x4c0 ~ 0x4c1 */ + uint dac_crt_ctrl; /* _DISP_DAC_CRT_CTRL_0 */ + uint disp_misc_ctrl; /* _DISP_DISP_MISC_CONTROL_0 */ +}; + +enum dc_winc_filter_p { + WINC_FILTER_COUNT = 0x10, +}; + +/* Window A/B/C register 0x500 ~ 0x628 */ +struct dc_winc_reg { + + /* Address 0x500 */ + uint color_palette; /* _WINC_COLOR_PALETTE_0 */ + + uint reserved0[0xff]; /* reserved_0[0xff] */ + + /* Address 0x600 */ + uint palette_color_ext; /* _WINC_PALETTE_COLOR_EXT_0 */ + + /* _WINC_H_FILTER_P00~0F_0 */ + /* Address 0x601 ~ 0x610 */ + uint h_filter_p[WINC_FILTER_COUNT]; + + /* Address 0x611 ~ 0x618 */ + uint csc_yof; /* _WINC_CSC_YOF_0 */ + uint csc_kyrgb; /* _WINC_CSC_KYRGB_0 */ + uint csc_kur; /* _WINC_CSC_KUR_0 */ + uint csc_kvr; /* _WINC_CSC_KVR_0 */ + uint csc_kug; /* _WINC_CSC_KUG_0 */ + uint csc_kvg; /* _WINC_CSC_KVG_0 */ + uint csc_kub; /* _WINC_CSC_KUB_0 */ + uint csc_kvb; /* _WINC_CSC_KVB_0 */ + + /* Address 0x619 ~ 0x628: _WINC_V_FILTER_P00~0F_0 */ + uint v_filter_p[WINC_FILTER_COUNT]; +}; + +/* WIN A/B/C Register 0x700 ~ 0x714*/ +struct dc_win_reg { + /* Address 0x700 ~ 0x714 */ + uint win_opt; /* _WIN_WIN_OPTIONS_0 */ + uint byte_swap; /* _WIN_BYTE_SWAP_0 */ + uint buffer_ctrl; /* _WIN_BUFFER_CONTROL_0 */ + uint color_depth; /* _WIN_COLOR_DEPTH_0 */ + uint pos; /* _WIN_POSITION_0 */ + uint size; /* _WIN_SIZE_0 */ + uint prescaled_size; /* _WIN_PRESCALED_SIZE_0 */ + uint h_initial_dda; /* _WIN_H_INITIAL_DDA_0 */ + uint v_initial_dda; /* _WIN_V_INITIAL_DDA_0 */ + uint dda_increment; /* _WIN_DDA_INCREMENT_0 */ + uint line_stride; /* _WIN_LINE_STRIDE_0 */ + uint buf_stride; /* _WIN_BUF_STRIDE_0 */ + uint uv_buf_stride; /* _WIN_UV_BUF_STRIDE_0 */ + uint buffer_addr_mode; /* _WIN_BUFFER_ADDR_MODE_0 */ + uint dv_ctrl; /* _WIN_DV_CONTROL_0 */ + uint blend_nokey; /* _WIN_BLEND_NOKEY_0 */ + uint blend_1win; /* _WIN_BLEND_1WIN_0 */ + uint blend_2win_x; /* _WIN_BLEND_2WIN_X_0 */ + uint blend_2win_y; /* _WIN_BLEND_2WIN_Y_0 */ + uint blend_3win_xy; /* _WIN_BLEND_3WIN_XY_0 */ + uint hp_fetch_ctrl; /* _WIN_HP_FETCH_CONTROL_0 */ +}; + +/* WINBUF A/B/C Register 0x800 ~ 0x80a */ +struct dc_winbuf_reg { + /* Address 0x800 ~ 0x80a */ + uint start_addr; /* _WINBUF_START_ADDR_0 */ + uint start_addr_ns; /* _WINBUF_START_ADDR_NS_0 */ + uint start_addr_u; /* _WINBUF_START_ADDR_U_0 */ + uint start_addr_u_ns; /* _WINBUF_START_ADDR_U_NS_0 */ + uint start_addr_v; /* _WINBUF_START_ADDR_V_0 */ + uint start_addr_v_ns; /* _WINBUF_START_ADDR_V_NS_0 */ + uint addr_h_offset; /* _WINBUF_ADDR_H_OFFSET_0 */ + uint addr_h_offset_ns; /* _WINBUF_ADDR_H_OFFSET_NS_0 */ + uint addr_v_offset; /* _WINBUF_ADDR_V_OFFSET_0 */ + uint addr_v_offset_ns; /* _WINBUF_ADDR_V_OFFSET_NS_0 */ + uint uflow_status; /* _WINBUF_UFLOW_STATUS_0 */ +}; + +/* Display Controller (DC_) regs */ +struct dc_ctlr { + struct dc_cmd_reg cmd; /* CMD register 0x000 ~ 0x43 */ + uint reserved0[0x2bc]; + + struct dc_com_reg com; /* COM register 0x300 ~ 0x329 */ + uint reserved1[0xd6]; + + struct dc_disp_reg disp; /* DISP register 0x400 ~ 0x4c1 */ + uint reserved2[0x3e]; + + struct dc_winc_reg winc; /* Window A/B/C 0x500 ~ 0x628 */ + uint reserved3[0xd7]; + + struct dc_win_reg win; /* WIN A/B/C 0x700 ~ 0x714*/ + uint reserved4[0xeb]; + + struct dc_winbuf_reg winbuf; /* WINBUF A/B/C 0x800 ~ 0x80a */ +}; + +#define BIT(pos) (1U << pos) + +/* DC_CMD_DISPLAY_COMMAND 0x032 */ +#define CTRL_MODE_SHIFT 5 +#define CTRL_MODE_MASK (0x3 << CTRL_MODE_SHIFT) +enum { + CTRL_MODE_STOP, + CTRL_MODE_C_DISPLAY, + CTRL_MODE_NC_DISPLAY, +}; + +/* _WIN_COLOR_DEPTH_0 */ +enum win_color_depth_id { + COLOR_DEPTH_P1, + COLOR_DEPTH_P2, + COLOR_DEPTH_P4, + COLOR_DEPTH_P8, + COLOR_DEPTH_B4G4R4A4, + COLOR_DEPTH_B5G5R5A, + COLOR_DEPTH_B5G6R5, + COLOR_DEPTH_AB5G5R5, + COLOR_DEPTH_B8G8R8A8 = 12, + COLOR_DEPTH_R8G8B8A8, + COLOR_DEPTH_B6x2G6x2R6x2A8, + COLOR_DEPTH_R6x2G6x2B6x2A8, + COLOR_DEPTH_YCbCr422, + COLOR_DEPTH_YUV422, + COLOR_DEPTH_YCbCr420P, + COLOR_DEPTH_YUV420P, + COLOR_DEPTH_YCbCr422P, + COLOR_DEPTH_YUV422P, + COLOR_DEPTH_YCbCr422R, + COLOR_DEPTH_YUV422R, + COLOR_DEPTH_YCbCr422RA, + COLOR_DEPTH_YUV422RA, +}; + +/* DC_CMD_DISPLAY_POWER_CONTROL 0x036 */ +#define PW0_ENABLE BIT(0) +#define PW1_ENABLE BIT(2) +#define PW2_ENABLE BIT(4) +#define PW3_ENABLE BIT(6) +#define PW4_ENABLE BIT(8) +#define PM0_ENABLE BIT(16) +#define PM1_ENABLE BIT(18) +#define SPI_ENABLE BIT(24) +#define HSPI_ENABLE BIT(25) + +/* DC_CMD_STATE_CONTROL 0x041 */ +#define GENERAL_ACT_REQ BIT(0) +#define WIN_A_ACT_REQ BIT(1) +#define WIN_B_ACT_REQ BIT(2) +#define WIN_C_ACT_REQ BIT(3) +#define GENERAL_UPDATE BIT(8) +#define WIN_A_UPDATE BIT(9) +#define WIN_B_UPDATE BIT(10) +#define WIN_C_UPDATE BIT(11) + +/* DC_CMD_DISPLAY_WINDOW_HEADER 0x042 */ +#define WINDOW_A_SELECT BIT(4) +#define WINDOW_B_SELECT BIT(5) +#define WINDOW_C_SELECT BIT(6) + +/* DC_DISP_DISP_CLOCK_CONTROL 0x42e */ +#define SHIFT_CLK_DIVIDER_SHIFT 0 +#define SHIFT_CLK_DIVIDER_MASK (0xff << SHIFT_CLK_DIVIDER_SHIFT) +#define PIXEL_CLK_DIVIDER_SHIFT 8 +#define PIXEL_CLK_DIVIDER_MSK (0xf << PIXEL_CLK_DIVIDER_SHIFT) +enum { + PIXEL_CLK_DIVIDER_PCD1, + PIXEL_CLK_DIVIDER_PCD1H, + PIXEL_CLK_DIVIDER_PCD2, + PIXEL_CLK_DIVIDER_PCD3, + PIXEL_CLK_DIVIDER_PCD4, + PIXEL_CLK_DIVIDER_PCD6, + PIXEL_CLK_DIVIDER_PCD8, + PIXEL_CLK_DIVIDER_PCD9, + PIXEL_CLK_DIVIDER_PCD12, + PIXEL_CLK_DIVIDER_PCD16, + PIXEL_CLK_DIVIDER_PCD18, + PIXEL_CLK_DIVIDER_PCD24, + PIXEL_CLK_DIVIDER_PCD13, +}; + +/* DC_DISP_DISP_INTERFACE_CONTROL 0x42f */ +#define DATA_FORMAT_SHIFT 0 +#define DATA_FORMAT_MASK (0xf << DATA_FORMAT_SHIFT) +enum { + DATA_FORMAT_DF1P1C, + DATA_FORMAT_DF1P2C24B, + DATA_FORMAT_DF1P2C18B, + DATA_FORMAT_DF1P2C16B, + DATA_FORMAT_DF2S, + DATA_FORMAT_DF3S, + DATA_FORMAT_DFSPI, + DATA_FORMAT_DF1P3C24B, + DATA_FORMAT_DF1P3C18B, +}; +#define DATA_ALIGNMENT_SHIFT 8 +enum { + DATA_ALIGNMENT_MSB, + DATA_ALIGNMENT_LSB, +}; +#define DATA_ORDER_SHIFT 9 +enum { + DATA_ORDER_RED_BLUE, + DATA_ORDER_BLUE_RED, +}; + +/* DC_DISP_DATA_ENABLE_OPTIONS 0x432 */ +#define DE_SELECT_SHIFT 0 +#define DE_SELECT_MASK (0x3 << DE_SELECT_SHIFT) +#define DE_SELECT_ACTIVE_BLANK 0x0 +#define DE_SELECT_ACTIVE 0x1 +#define DE_SELECT_ACTIVE_IS 0x2 +#define DE_CONTROL_SHIFT 2 +#define DE_CONTROL_MASK (0x7 << DE_CONTROL_SHIFT) +enum { + DE_CONTROL_ONECLK, + DE_CONTROL_NORMAL, + DE_CONTROL_EARLY_EXT, + DE_CONTROL_EARLY, + DE_CONTROL_ACTIVE_BLANK, +}; + +/* DC_WIN_WIN_OPTIONS 0x700 */ +#define H_DIRECTION BIT(0) +enum { + H_DIRECTION_INCREMENT, + H_DIRECTION_DECREMENT, +}; +#define V_DIRECTION BIT(2) +enum { + V_DIRECTION_INCREMENT, + V_DIRECTION_DECREMENT, +}; +#define COLOR_EXPAND BIT(6) +#define CP_ENABLE BIT(16) +#define DV_ENABLE BIT(20) +#define WIN_ENABLE BIT(30) + +/* DC_WIN_BYTE_SWAP 0x701 */ +#define BYTE_SWAP_SHIFT 0 +#define BYTE_SWAP_MASK (3 << BYTE_SWAP_SHIFT) +enum { + BYTE_SWAP_NOSWAP, + BYTE_SWAP_SWAP2, + BYTE_SWAP_SWAP4, + BYTE_SWAP_SWAP4HW +}; + +/* DC_WIN_POSITION 0x704 */ +#define H_POSITION_SHIFT 0 +#define H_POSITION_MASK (0x1FFF << H_POSITION_SHIFT) +#define V_POSITION_SHIFT 16 +#define V_POSITION_MASK (0x1FFF << V_POSITION_SHIFT) + +/* DC_WIN_SIZE 0x705 */ +#define H_SIZE_SHIFT 0 +#define H_SIZE_MASK (0x1FFF << H_SIZE_SHIFT) +#define V_SIZE_SHIFT 16 +#define V_SIZE_MASK (0x1FFF << V_SIZE_SHIFT) + +/* DC_WIN_PRESCALED_SIZE 0x706 */ +#define H_PRESCALED_SIZE_SHIFT 0 +#define H_PRESCALED_SIZE_MASK (0x7FFF << H_PRESCALED_SIZE) +#define V_PRESCALED_SIZE_SHIFT 16 +#define V_PRESCALED_SIZE_MASK (0x1FFF << V_PRESCALED_SIZE) + +/* DC_WIN_DDA_INCREMENT 0x709 */ +#define H_DDA_INC_SHIFT 0 +#define H_DDA_INC_MASK (0xFFFF << H_DDA_INC_SHIFT) +#define V_DDA_INC_SHIFT 16 +#define V_DDA_INC_MASK (0xFFFF << V_DDA_INC_SHIFT) + +#endif /* __ASM_ARCH_TEGRA_DC_H */ diff --git a/arch/arm/include/asm/arch-tegra20/display.h b/arch/arm/include/asm/arch-tegra20/display.h new file mode 100644 index 0000000000..c8709590c7 --- /dev/null +++ b/arch/arm/include/asm/arch-tegra20/display.h @@ -0,0 +1,152 @@ +/* + * (C) Copyright 2010 + * NVIDIA Corporation <www.nvidia.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __ASM_ARCH_TEGRA_DISPLAY_H +#define __ASM_ARCH_TEGRA_DISPLAY_H + +#include <asm/arch/dc.h> +#include <fdtdec.h> + +/* This holds information about a window which can be displayed */ +struct disp_ctl_win { + enum win_color_depth_id fmt; /* Color depth/format */ + unsigned bpp; /* Bits per pixel */ + phys_addr_t phys_addr; /* Physical address in memory */ + unsigned x; /* Horizontal address offset (bytes) */ + unsigned y; /* Veritical address offset (bytes) */ + unsigned w; /* Width of source window */ + unsigned h; /* Height of source window */ + unsigned stride; /* Number of bytes per line */ + unsigned out_x; /* Left edge of output window (col) */ + unsigned out_y; /* Top edge of output window (row) */ + unsigned out_w; /* Width of output window in pixels */ + unsigned out_h; /* Height of output window in pixels */ +}; + +#define FDT_LCD_TIMINGS 4 + +enum { + FDT_LCD_TIMING_REF_TO_SYNC, + FDT_LCD_TIMING_SYNC_WIDTH, + FDT_LCD_TIMING_BACK_PORCH, + FDT_LCD_TIMING_FRONT_PORCH, + + FDT_LCD_TIMING_COUNT, +}; + +enum lcd_cache_t { + FDT_LCD_CACHE_OFF = 0, + FDT_LCD_CACHE_WRITE_THROUGH = 1 << 0, + FDT_LCD_CACHE_WRITE_BACK = 1 << 1, + FDT_LCD_CACHE_FLUSH = 1 << 2, + FDT_LCD_CACHE_WRITE_BACK_FLUSH = FDT_LCD_CACHE_WRITE_BACK | + FDT_LCD_CACHE_FLUSH, +}; + +/* Information about the display controller */ +struct fdt_disp_config { + int valid; /* config is valid */ + int width; /* width in pixels */ + int height; /* height in pixels */ + int bpp; /* number of bits per pixel */ + + /* + * log2 of number of bpp, in general, unless it bpp is 24 in which + * case this field holds 24 also! This is a U-Boot thing. + */ + int log2_bpp; + struct disp_ctlr *disp; /* Display controller to use */ + fdt_addr_t frame_buffer; /* Address of frame buffer */ + unsigned pixel_clock; /* Pixel clock in Hz */ + uint horiz_timing[FDT_LCD_TIMING_COUNT]; /* Horizontal timing */ + uint vert_timing[FDT_LCD_TIMING_COUNT]; /* Vertical timing */ + int panel_node; /* node offset of panel information */ +}; + +/* Information about the LCD panel */ +struct fdt_panel_config { + int pwm_channel; /* PWM channel to use for backlight */ + enum lcd_cache_t cache_type; + + struct fdt_gpio_state backlight_en; /* GPIO for backlight enable */ + struct fdt_gpio_state lvds_shutdown; /* GPIO for lvds shutdown */ + struct fdt_gpio_state backlight_vdd; /* GPIO for backlight vdd */ + struct fdt_gpio_state panel_vdd; /* GPIO for panel vdd */ + /* + * Panel required timings + * Timing 1: delay between panel_vdd-rise and data-rise + * Timing 2: delay between data-rise and backlight_vdd-rise + * Timing 3: delay between backlight_vdd and pwm-rise + * Timing 4: delay between pwm-rise and backlight_en-rise + */ + uint panel_timings[FDT_LCD_TIMINGS]; +}; + +/** + * Register a new display based on device tree configuration. + * + * The frame buffer can be positioned by U-Boot or overriden by the fdt. + * You should pass in the U-Boot address here, and check the contents of + * struct fdt_disp_config to see what was actually chosen. + * + * @param blob Device tree blob + * @param default_lcd_base Default address of LCD frame buffer + * @return 0 if ok, -1 on error (unsupported bits per pixel) + */ +int tegra_display_probe(const void *blob, void *default_lcd_base); + +/** + * Return the current display configuration + * + * @return pointer to display configuration, or NULL if there is no valid + * config + */ +struct fdt_disp_config *tegra_display_get_config(void); + +/** + * Perform the next stage of the LCD init if it is time to do so. + * + * LCD init can be time-consuming because of the number of delays we need + * while waiting for the backlight power supply, etc. This function can + * be called at various times during U-Boot operation to advance the + * initialization of the LCD to the next stage if sufficient time has + * passed since the last stage. It keeps track of what stage it is up to + * and the time that it is permitted to move to the next stage. + * + * The final call should have wait=1 to complete the init. + * + * @param blob fdt blob containing LCD information + * @param wait 1 to wait until all init is complete, and then return + * 0 to return immediately, potentially doing nothing if it is + * not yet time for the next init. + */ +int tegra_lcd_check_next_stage(const void *blob, int wait); + +/** + * Set up the maximum LCD size so we can size the frame buffer. + * + * @param blob fdt blob containing LCD information + */ +void tegra_lcd_early_init(const void *blob); + +#endif /*__ASM_ARCH_TEGRA_DISPLAY_H*/ diff --git a/arch/arm/include/asm/arch-tegra20/pinmux.h b/arch/arm/include/asm/arch-tegra20/pinmux.h index 03fa7ca643..797e158e68 100644 --- a/arch/arm/include/asm/arch-tegra20/pinmux.h +++ b/arch/arm/include/asm/arch-tegra20/pinmux.h @@ -339,7 +339,7 @@ void pinmux_set_pullupdown(enum pmux_pingrp pin, enum pmux_pull pupd); void pinmux_set_func(enum pmux_pingrp pin, enum pmux_func func); /* Set the complete configuration for a pin group */ -void pinmux_config_pingroup(struct pingroup_config *config); +void pinmux_config_pingroup(const struct pingroup_config *config); void pinmux_set_tristate(enum pmux_pingrp pin, int enable); @@ -349,6 +349,6 @@ void pinmux_set_tristate(enum pmux_pingrp pin, int enable); * @param config List of config items * @param len Number of config items in list */ -void pinmux_config_table(struct pingroup_config *config, int len); +void pinmux_config_table(const struct pingroup_config *config, int len); #endif /* PINMUX_H */ diff --git a/arch/arm/include/asm/arch-tegra20/pwm.h b/arch/arm/include/asm/arch-tegra20/pwm.h new file mode 100644 index 0000000000..9e03837ccb --- /dev/null +++ b/arch/arm/include/asm/arch-tegra20/pwm.h @@ -0,0 +1,75 @@ +/* + * Tegra pulse width frequency modulator definitions + * + * Copyright (c) 2011 The Chromium OS Authors. + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __ASM_ARCH_TEGRA_PWM_H +#define __ASM_ARCH_TEGRA_PWM_H + +/* This is a single PWM channel */ +struct pwm_ctlr { + uint control; /* Control register */ + uint reserved[3]; /* Space space */ +}; + +#define PWM_NUM_CHANNELS 4 + +/* PWM_CONTROLLER_PWM_CSR_0/1/2/3_0 */ +#define PWM_ENABLE_SHIFT 31 +#define PWM_ENABLE_MASK (0x1 << PWM_ENABLE_SHIFT) + +#define PWM_WIDTH_SHIFT 16 +#define PWM_WIDTH_MASK (0x7FFF << PWM_WIDTH_SHIFT) + +#define PWM_DIVIDER_SHIFT 0 +#define PWM_DIVIDER_MASK (0x1FFF << PWM_DIVIDER_SHIFT) + +/** + * Program the PWM with the given parameters. + * + * @param channel PWM channel to update + * @param rate Clock rate to use for PWM + * @param pulse_width high pulse width: 0=always low, 1=1/256 pulse high, + * n = n/256 pulse high + * @param freq_divider frequency divider value (1 to use rate as is) + */ +void pwm_enable(unsigned channel, int rate, int pulse_width, int freq_divider); + +/** + * Request a pwm channel as referenced by a device tree node. + * + * This channel can then be passed to pwm_enable(). + * + * @param blob Device tree blob + * @param node Node containing reference to pwm + * @param prop_name Property name of pwm reference + * @return channel number, if ok, else -1 + */ +int pwm_request(const void *blob, int node, const char *prop_name); + +/** + * Set up the pwm controller, by looking it up in the fdt. + * + * @return 0 if ok, -1 if the device tree node was not found or invalid. + */ +int pwm_init(const void *blob); + +#endif /* __ASM_ARCH_TEGRA_PWM_H */ diff --git a/arch/arm/include/asm/global_data.h b/arch/arm/include/asm/global_data.h index 2b9af93806..41a26edfb5 100644 --- a/arch/arm/include/asm/global_data.h +++ b/arch/arm/include/asm/global_data.h @@ -73,6 +73,7 @@ typedef struct global_data { unsigned long reloc_off; #if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF)) unsigned long tlb_addr; + unsigned long tlb_size; #endif const void *fdt_blob; /* Our device tree, NULL if none */ void **jt; /* jump table */ diff --git a/arch/arm/include/asm/omap_gpio.h b/arch/arm/include/asm/omap_gpio.h index 516cc4260c..1ebfa8694f 100644 --- a/arch/arm/include/asm/omap_gpio.h +++ b/arch/arm/include/asm/omap_gpio.h @@ -49,4 +49,11 @@ extern const struct gpio_bank *const omap_gpio_bank; #define METHOD_GPIO_24XX 4 +/** + * Check if gpio is valid. + * + * @param gpio GPIO number + * @return 1 if ok, 0 on error + */ +int gpio_is_valid(int gpio); #endif /* _GPIO_H_ */ diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h index 2b28a261ba..78ca8e0a6d 100644 --- a/arch/arm/include/asm/system.h +++ b/arch/arm/include/asm/system.h @@ -75,6 +75,37 @@ static inline void set_cr(unsigned int val) isb(); } +/* options available for data cache on each page */ +enum dcache_option { + DCACHE_OFF = 0x12, + DCACHE_WRITETHROUGH = 0x1a, + DCACHE_WRITEBACK = 0x1e, +}; + +/* Size of an MMU section */ +enum { + MMU_SECTION_SHIFT = 20, + MMU_SECTION_SIZE = 1 << MMU_SECTION_SHIFT, +}; + +/** + * Change the cache settings for a region. + * + * \param start start address of memory region to change + * \param size size of memory region to change + * \param option dcache option to select + */ +void mmu_set_region_dcache_behaviour(u32 start, int size, + enum dcache_option option); + +/** + * Register an update to the page tables, and flush the TLB + * + * \param start start address of update in page table + * \param stop stop address of update in page table + */ +void mmu_page_table_flush(unsigned long start, unsigned long stop); + #endif /* __ASSEMBLY__ */ #define arch_align_stack(x) (x) diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile index 3422ac1c5f..57111afd90 100644 --- a/arch/arm/lib/Makefile +++ b/arch/arm/lib/Makefile @@ -36,18 +36,21 @@ GLSOBJS += _umodsi3.o GLCOBJS += div0.o +SOBJS-y += crt0.o + ifndef CONFIG_SPL_BUILD COBJS-y += board.o COBJS-y += bootm.o COBJS-$(CONFIG_SYS_L2_PL310) += cache-pl310.o -COBJS-y += interrupts.o -COBJS-y += reset.o SOBJS-$(CONFIG_USE_ARCH_MEMSET) += memset.o SOBJS-$(CONFIG_USE_ARCH_MEMCPY) += memcpy.o else COBJS-$(CONFIG_SPL_FRAMEWORK) += spl.o endif +COBJS-y += interrupts.o +COBJS-y += reset.o + COBJS-y += cache.o COBJS-y += cache-cp15.o diff --git a/arch/arm/lib/board.c b/arch/arm/lib/board.c index e0cb6353a3..cfe32cc926 100644 --- a/arch/arm/lib/board.c +++ b/arch/arm/lib/board.c @@ -40,6 +40,7 @@ #include <common.h> #include <command.h> +#include <environment.h> #include <malloc.h> #include <stdio_dev.h> #include <version.h> @@ -231,15 +232,23 @@ int __power_init_board(void) int power_init_board(void) __attribute__((weak, alias("__power_init_board"))); + /* Record the board_init_f() bootstage (after arch_cpu_init()) */ +static int mark_bootstage(void) +{ + bootstage_mark_name(BOOTSTAGE_ID_START_UBOOT_F, "board_init_f"); + + return 0; +} + init_fnc_t *init_sequence[] = { arch_cpu_init, /* basic arch cpu dependent setup */ - -#if defined(CONFIG_BOARD_EARLY_INIT_F) - board_early_init_f, -#endif + mark_bootstage, #ifdef CONFIG_OF_CONTROL fdtdec_check_fdt, #endif +#if defined(CONFIG_BOARD_EARLY_INIT_F) + board_early_init_f, +#endif timer_init, /* initialize timer */ #ifdef CONFIG_BOARD_POSTCLK_INIT board_postclk_init, @@ -277,13 +286,6 @@ void board_init_f(ulong bootflag) void *new_fdt = NULL; size_t fdt_size = 0; - bootstage_mark_name(BOOTSTAGE_ID_START_UBOOT_F, "board_init_f"); - - /* Pointer is writable since we allocated a register for it */ - gd = (gd_t *) ((CONFIG_SYS_INIT_SP_ADDR) & ~0x07); - /* compiler optimization barrier needed for GCC >= 3.4 */ - __asm__ __volatile__("": : :"memory"); - memset((void *)gd, 0, sizeof(gd_t)); gd->mon_len = _bss_end_ofs; @@ -353,13 +355,14 @@ void board_init_f(ulong bootflag) #if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF)) /* reserve TLB table */ - addr -= (4096 * 4); + gd->tlb_size = 4096 * 4; + addr -= gd->tlb_size; /* round down to next 64 kB limit */ addr &= ~(0x10000 - 1); gd->tlb_addr = addr; - debug("TLB table at: %08lx\n", addr); + debug("TLB table from %08lx to %08lx\n", addr, addr + gd->tlb_size); #endif /* round down to next 4 kB limit */ @@ -465,10 +468,6 @@ void board_init_f(ulong bootflag) gd->fdt_blob = new_fdt; } memcpy(id, (void *)gd, sizeof(gd_t)); - - relocate_code(addr_sp, id, addr); - - /* NOTREACHED - relocate_code() does not return */ } #if !defined(CONFIG_SYS_NO_FLASH) @@ -476,7 +475,38 @@ static char *failed = "*** failed ***\n"; #endif /* - ************************************************************************ + * Tell if it's OK to load the environment early in boot. + * + * If CONFIG_OF_CONFIG is defined, we'll check with the FDT to see + * if this is OK (defaulting to saying it's not OK). + * + * NOTE: Loading the environment early can be a bad idea if security is + * important, since no verification is done on the environment. + * + * @return 0 if environment should not be loaded, !=0 if it is ok to load + */ +static int should_load_env(void) +{ +#ifdef CONFIG_OF_CONTROL + return fdtdec_get_config_int(gd->fdt_blob, "load-environment", 0); +#elif defined CONFIG_DELAY_ENVIRONMENT + return 0; +#else + return 1; +#endif +} + +#if defined(CONFIG_DISPLAY_BOARDINFO_LATE) && defined(CONFIG_OF_CONTROL) +static void display_fdt_model(const void *blob) +{ + const char *model; + + model = (char *)fdt_getprop(blob, 0, "model", NULL); + printf("Model: %s\n", model ? model : "<unknown>"); +} +#endif + +/************************************************************************ * * This is the next part if the initialization sequence: we are now * running from RAM and have a "normal" C environment, i. e. global @@ -493,8 +523,6 @@ void board_init_r(gd_t *id, ulong dest_addr) ulong flash_size; #endif - gd = id; - gd->flags |= GD_FLG_RELOC; /* tell others: relocation done */ bootstage_mark_name(BOOTSTAGE_ID_START_UBOOT_R, "board_init_r"); @@ -571,8 +599,8 @@ void board_init_r(gd_t *id, ulong dest_addr) #endif #ifdef CONFIG_GENERIC_MMC - puts("MMC: "); - mmc_initialize(gd->bd); + puts("MMC: "); + mmc_initialize(gd->bd); #endif #ifdef CONFIG_HAS_DATAFLASH @@ -581,7 +609,10 @@ void board_init_r(gd_t *id, ulong dest_addr) #endif /* initialize environment */ - env_relocate(); + if (should_load_env()) + env_relocate(); + else + set_default_env(NULL); #if defined(CONFIG_CMD_PCI) || defined(CONFIG_PCI) arm_pci_init(); @@ -598,6 +629,15 @@ void board_init_r(gd_t *id, ulong dest_addr) console_init_r(); /* fully init console as a device */ +#ifdef CONFIG_DISPLAY_BOARDINFO_LATE +# ifdef CONFIG_OF_CONTROL + /* Put this here so it appears on the LCD, now it is ready */ + display_fdt_model(gd->fdt_blob); +# else + checkboard(); +# endif +#endif + #if defined(CONFIG_ARCH_MISC_INIT) /* miscellaneous arch dependent initialisations */ arch_misc_init(); diff --git a/arch/arm/lib/cache-cp15.c b/arch/arm/lib/cache-cp15.c index 939de10e03..1cab27c226 100644 --- a/arch/arm/lib/cache-cp15.c +++ b/arch/arm/lib/cache-cp15.c @@ -26,12 +26,6 @@ #if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF)) -#if defined(CONFIG_SYS_ARM_CACHE_WRITETHROUGH) -#define CACHE_SETUP 0x1a -#else -#define CACHE_SETUP 0x1e -#endif - DECLARE_GLOBAL_DATA_PTR; void __arm_init_before_mmu(void) @@ -50,9 +44,41 @@ static void cp_delay (void) asm volatile("" : : : "memory"); } -static inline void dram_bank_mmu_setup(int bank) +void set_section_dcache(int section, enum dcache_option option) +{ + u32 *page_table = (u32 *)gd->tlb_addr; + u32 value; + + value = (section << MMU_SECTION_SHIFT) | (3 << 10); + value |= option; + page_table[section] = value; +} + +void __mmu_page_table_flush(unsigned long start, unsigned long stop) +{ + debug("%s: Warning: not implemented\n", __func__); +} + +void mmu_page_table_flush(unsigned long start, unsigned long stop) + __attribute__((weak, alias("__mmu_page_table_flush"))); + +void mmu_set_region_dcache_behaviour(u32 start, int size, + enum dcache_option option) { u32 *page_table = (u32 *)gd->tlb_addr; + u32 upto, end; + + end = ALIGN(start + size, MMU_SECTION_SIZE) >> MMU_SECTION_SHIFT; + start = start >> MMU_SECTION_SHIFT; + debug("%s: start=%x, size=%x, option=%d\n", __func__, start, size, + option); + for (upto = start; upto < end; upto++) + set_section_dcache(upto, option); + mmu_page_table_flush((u32)&page_table[start], (u32)&page_table[end]); +} + +static inline void dram_bank_mmu_setup(int bank) +{ bd_t *bd = gd->bd; int i; @@ -60,21 +86,24 @@ static inline void dram_bank_mmu_setup(int bank) for (i = bd->bi_dram[bank].start >> 20; i < (bd->bi_dram[bank].start + bd->bi_dram[bank].size) >> 20; i++) { - page_table[i] = i << 20 | (3 << 10) | CACHE_SETUP; +#if defined(CONFIG_SYS_ARM_CACHE_WRITETHROUGH) + set_section_dcache(i, DCACHE_WRITETHROUGH); +#else + set_section_dcache(i, DCACHE_WRITEBACK); +#endif } } /* to activate the MMU we need to set up virtual memory: use 1M areas */ static inline void mmu_setup(void) { - u32 *page_table = (u32 *)gd->tlb_addr; int i; u32 reg; arm_init_before_mmu(); /* Set up an identity-mapping for all 4GB, rw for everyone */ for (i = 0; i < 4096; i++) - page_table[i] = i << 20 | (3 << 10) | 0x12; + set_section_dcache(i, DCACHE_OFF); for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) { dram_bank_mmu_setup(i); @@ -82,7 +111,7 @@ static inline void mmu_setup(void) /* Copy the page table address to cp15 */ asm volatile("mcr p15, 0, %0, c2, c0, 0" - : : "r" (page_table) : "memory"); + : : "r" (gd->tlb_addr) : "memory"); /* Set the access control to all-supervisor */ asm volatile("mcr p15, 0, %0, c3, c0, 0" : : "r" (~0)); @@ -124,8 +153,11 @@ static void cache_disable(uint32_t cache_bit) return; /* if disabling data cache, disable mmu too */ cache_bit |= CR_M; - flush_dcache_all(); } + reg = get_cr(); + cp_delay(); + if (cache_bit == (CR_C | CR_M)) + flush_dcache_all(); set_cr(reg & ~cache_bit); } #endif diff --git a/arch/arm/lib/crt0.S b/arch/arm/lib/crt0.S new file mode 100644 index 0000000000..4f60958b1d --- /dev/null +++ b/arch/arm/lib/crt0.S @@ -0,0 +1,173 @@ +/* + * crt0 - C-runtime startup Code for ARM U-Boot + * + * Copyright (c) 2012 Albert ARIBAUD <albert.u.boot@aribaud.net> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <asm-offsets.h> + +/* + * This file handles the target-independent stages of the U-Boot + * start-up where a C runtime environment is needed. Its entry point + * is _main and is branched into from the target's start.S file. + * + * _main execution sequence is: + * + * 1. Set up initial environment for calling board_init_f(). + * This environment only provides a stack and a place to store + * the GD ('global data') structure, both located in some readily + * available RAM (SRAM, locked cache...). In this context, VARIABLE + * global data, initialized or not (BSS), are UNAVAILABLE; only + * CONSTANT initialized data are available. + * + * 2. Call board_init_f(). This function prepares the hardware for + * execution from system RAM (DRAM, DDR...) As system RAM may not + * be available yet, , board_init_f() must use the current GD to + * store any data which must be passed on to later stages. These + * data include the relocation destination, the future stack, and + * the future GD location. + * + * (the following applies only to non-SPL builds) + * + * 3. Set up intermediate environment where the stack and GD are the + * ones allocated by board_init_f() in system RAM, but BSS and + * initialized non-const data are still not available. + * + * 4. Call relocate_code(). This function relocates U-Boot from its + * current location into the relocation destination computed by + * board_init_f(). + * + * 5. Set up final environment for calling board_init_r(). This + * environment has BSS (initialized to 0), initialized non-const + * data (initialized to their intended value), and stack in system + * RAM. GD has retained values set by board_init_f(). Some CPUs + * have some work left to do at this point regarding memory, so + * call c_runtime_cpu_setup. + * + * 6. Branch to either nand_boot() or board_init_r(). + */ + +/* + * declare nand_boot() or board_init_r() to jump to at end of crt0 + */ + +#if defined(CONFIG_NAND_SPL) + +.globl nand_boot + +#elif ! defined(CONFIG_SPL_BUILD) + +.globl board_init_r + +#endif + +/* + * start and end of BSS + */ + +.globl __bss_start +.globl __bss_end__ + +/* + * entry point of crt0 sequence + */ + +.global _main + +_main: + +/* + * Set up initial C runtime environment and call board_init_f(0). + */ + +#if defined(CONFIG_NAND_SPL) + /* deprecated, use instead CONFIG_SPL_BUILD */ + ldr sp, =(CONFIG_SYS_INIT_SP_ADDR) +#elif defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_STACK) + ldr sp, =(CONFIG_SPL_STACK) +#else + ldr sp, =(CONFIG_SYS_INIT_SP_ADDR) +#endif + bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ + sub sp, #GD_SIZE /* allocate one GD above SP */ + bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ + mov r8, sp /* GD is above SP */ + mov r0, #0 + bl board_init_f + +#if ! defined(CONFIG_SPL_BUILD) + +/* + * Set up intermediate environment (new sp and gd) and call + * relocate_code(addr_sp, gd, addr_moni). Trick here is that + * we'll return 'here' but relocated. + */ + + ldr sp, [r8, #GD_START_ADDR_SP] /* r8 = gd->start_addr_sp */ + bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ + ldr r8, [r8, #GD_BD] /* r8 = gd->bd */ + sub r8, r8, #GD_SIZE /* new GD is below bd */ + + adr lr, here + ldr r0, [r8, #GD_RELOC_OFF] /* lr = gd->start_addr_sp */ + add lr, lr, r0 + ldr r0, [r8, #GD_START_ADDR_SP] /* r0 = gd->start_addr_sp */ + mov r1, r8 /* r1 = gd */ + ldr r2, [r8, #GD_RELOCADDR] /* r2 = gd->relocaddr */ + b relocate_code +here: + +/* Set up final (full) environment */ + + bl c_runtime_cpu_setup /* we still call old routine here */ + + ldr r0, =__bss_start /* this is auto-relocated! */ + ldr r1, =__bss_end__ /* this is auto-relocated! */ + + mov r2, #0x00000000 /* prepare zero to clear BSS */ + +clbss_l:cmp r0, r1 /* while not at end of BSS */ + strlo r2, [r0] /* clear 32-bit BSS word */ + addlo r0, r0, #4 /* move to next */ + blo clbss_l + + bl coloured_LED_init + bl red_led_on + +#if defined(CONFIG_NAND_SPL) + + /* call _nand_boot() */ + ldr pc, =nand_boot + +#else + + /* call board_init_r(gd_t *id, ulong dest_addr) */ + mov r0, r8 /* gd_t */ + ldr r1, [r8, #GD_RELOCADDR] /* dest_addr */ + /* call board_init_r */ + ldr pc, =board_init_r /* this is auto-relocated! */ + +#endif + + /* we should not return here. */ + +#endif diff --git a/arch/m68k/lib/board.c b/arch/m68k/lib/board.c index 794b8679fe..e934cb6c25 100644 --- a/arch/m68k/lib/board.c +++ b/arch/m68k/lib/board.c @@ -402,14 +402,14 @@ void board_init_r (gd_t *id, ulong dest_addr) gd->flags |= GD_FLG_RELOC; /* tell others: relocation done */ - serial_initialize(); - debug ("Now running in RAM - U-Boot at: %08lx\n", dest_addr); WATCHDOG_RESET (); gd->reloc_off = dest_addr - CONFIG_SYS_MONITOR_BASE; + serial_initialize(); + monitor_flash_len = (ulong)&__init_end - dest_addr; #if defined(CONFIG_NEEDS_MANUAL_RELOC) diff --git a/arch/sh/include/asm/cpu_sh4.h b/arch/sh/include/asm/cpu_sh4.h index f1f49fe7fa..af5c56f21e 100644 --- a/arch/sh/include/asm/cpu_sh4.h +++ b/arch/sh/include/asm/cpu_sh4.h @@ -48,6 +48,8 @@ # include <asm/cpu_sh7724.h> #elif defined (CONFIG_CPU_SH7734) # include <asm/cpu_sh7734.h> +#elif defined (CONFIG_CPU_SH7752) +# include <asm/cpu_sh7752.h> #elif defined (CONFIG_CPU_SH7757) # include <asm/cpu_sh7757.h> #elif defined (CONFIG_CPU_SH7763) diff --git a/arch/sh/include/asm/cpu_sh7752.h b/arch/sh/include/asm/cpu_sh7752.h new file mode 100644 index 0000000000..f0ad0e891c --- /dev/null +++ b/arch/sh/include/asm/cpu_sh7752.h @@ -0,0 +1,211 @@ +/* + * Copyright (C) 2012 Renesas Solutions Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#ifndef _ASM_CPU_SH7752_H_ +#define _ASM_CPU_SH7752_H_ + +#define CCR 0xFF00001C +#define WTCNT 0xFFCC0000 +#define CCR_CACHE_INIT 0x0000090b +#define CACHE_OC_NUM_WAYS 1 + +#ifndef __ASSEMBLY__ /* put C only stuff in this section */ +/* MMU */ +struct mmu_regs { + unsigned int reserved[4]; + unsigned int mmucr; +}; +#define MMU_BASE ((struct mmu_regs *)0xff000000) + +/* Watchdog */ +#define WTCSR0 0xffcc0002 +#define WRSTCSR_R 0xffcc0003 +#define WRSTCSR_W 0xffcc0002 +#define WTCSR_PREFIX 0xa500 +#define WRSTCSR_PREFIX 0x6900 +#define WRSTCSR_WOVF_PREFIX 0x9600 + +/* SCIF */ +#define SCIF0_BASE 0xfe4b0000 /* The real name is SCIF2 */ +#define SCIF1_BASE 0xfe4c0000 /* The real name is SCIF3 */ +#define SCIF2_BASE 0xfe4d0000 /* The real name is SCIF4 */ + +/* TMU0 */ +#define TMU_BASE 0xFE430000 + +/* ETHER, GETHER MAC address */ +struct ether_mac_regs { + unsigned int reserved[114]; + unsigned int mahr; + unsigned int reserved2; + unsigned int malr; +}; +#define GETHER0_MAC_BASE ((struct ether_mac_regs *)0xfee0400) +#define GETHER1_MAC_BASE ((struct ether_mac_regs *)0xfee0c00) +#define ETHER0_MAC_BASE ((struct ether_mac_regs *)0xfef0000) +#define ETHER1_MAC_BASE ((struct ether_mac_regs *)0xfef0800) + +/* GETHER */ +struct gether_control_regs { + unsigned int gbecont; +}; +#define GETHER_CONTROL_BASE ((struct gether_control_regs *)0xffc10100) +#define GBECONT_RMII1 0x00020000 +#define GBECONT_RMII0 0x00010000 + +/* SerMux */ +struct sermux_regs { + unsigned char smr0; + unsigned char smr1; + unsigned char smr2; + unsigned char smr3; + unsigned char smr4; + unsigned char smr5; +}; +#define SERMUX_BASE ((struct sermux_regs *)0xfe470000) + + +/* USB0/1 */ +struct usb_common_regs { + unsigned short reserved[129]; + unsigned short suspmode; +}; +#define USB0_COMMON_BASE ((struct usb_common_regs *)0xfe450000) +#define USB1_COMMON_BASE ((struct usb_common_regs *)0xfe4f0000) + +struct usb0_phy_regs { + unsigned short reset; + unsigned short reserved[4]; + unsigned short portsel; +}; +#define USB0_PHY_BASE ((struct usb0_phy_regs *)0xfe5f0000) + +struct usb1_port_regs { + unsigned int port1sel; + unsigned int reserved; + unsigned int usb1intsts; +}; +#define USB1_PORT_BASE ((struct usb1_port_regs *)0xfe4f2000) + +struct usb1_alignment_regs { + unsigned int ehcidatac; /* 0xfe4fe018 */ + unsigned int reserved[63]; + unsigned int ohcidatac; +}; +#define USB1_ALIGNMENT_BASE ((struct usb1_alignment_regs *)0xfe4fe018) + +/* GPIO */ +struct gpio_regs { + unsigned short pacr; + unsigned short pbcr; + unsigned short pccr; + unsigned short pdcr; + unsigned short pecr; + unsigned short pfcr; + unsigned short pgcr; + unsigned short phcr; + unsigned short picr; + unsigned short pjcr; + unsigned short pkcr; + unsigned short plcr; + unsigned short pmcr; + unsigned short pncr; + unsigned short pocr; + unsigned short reserved; + unsigned short pqcr; + unsigned short prcr; + unsigned short pscr; + unsigned short ptcr; + unsigned short pucr; + unsigned short pvcr; + unsigned short pwcr; + unsigned short pxcr; + unsigned short pycr; + unsigned short pzcr; + unsigned char padr; + unsigned char reserved_a; + unsigned char pbdr; + unsigned char reserved_b; + unsigned char pcdr; + unsigned char reserved_c; + unsigned char pddr; + unsigned char reserved_d; + unsigned char pedr; + unsigned char reserved_e; + unsigned char pfdr; + unsigned char reserved_f; + unsigned char pgdr; + unsigned char reserved_g; + unsigned char phdr; + unsigned char reserved_h; + unsigned char pidr; + unsigned char reserved_i; + unsigned char pjdr; + unsigned char reserved_j; + unsigned char pkdr; + unsigned char reserved_k; + unsigned char pldr; + unsigned char reserved_l; + unsigned char pmdr; + unsigned char reserved_m; + unsigned char pndr; + unsigned char reserved_n; + unsigned char podr; + unsigned char reserved_o; + unsigned char ppdr; + unsigned char reserved_p; + unsigned char pqdr; + unsigned char reserved_q; + unsigned char prdr; + unsigned char reserved_r; + unsigned char psdr; + unsigned char reserved_s; + unsigned char ptdr; + unsigned char reserved_t; + unsigned char pudr; + unsigned char reserved_u; + unsigned char pvdr; + unsigned char reserved_v; + unsigned char pwdr; + unsigned char reserved_w; + unsigned char pxdr; + unsigned char reserved_x; + unsigned char pydr; + unsigned char reserved_y; + unsigned char pzdr; + unsigned char reserved_z; + unsigned short ncer; + unsigned short ncmcr; + unsigned short nccsr; + unsigned char reserved2[2]; + unsigned short psel0; /* +0x70 */ + unsigned short psel1; + unsigned short psel2; + unsigned short psel3; + unsigned short psel4; + unsigned short psel5; + unsigned short psel6; + unsigned short reserved3[2]; + unsigned short psel7; +}; +#define GPIO_BASE ((struct gpio_regs *)0xffec0000) + +#endif /* ifndef __ASSEMBLY__ */ +#endif /* _ASM_CPU_SH7752_H_ */ |