diff options
Diffstat (limited to 'arch')
214 files changed, 6544 insertions, 2252 deletions
diff --git a/arch/arm/cpu/arm1136/mx35/generic.c b/arch/arm/cpu/arm1136/mx35/generic.c index 986b1f9463..d435e8af69 100644 --- a/arch/arm/cpu/arm1136/mx35/generic.c +++ b/arch/arm/cpu/arm1136/mx35/generic.c @@ -30,6 +30,9 @@ #include <asm/arch/crm_regs.h> #include <asm/arch/clock.h> #include <asm/arch/sys_proto.h> +#ifdef CONFIG_FSL_ESDHC +#include <fsl_esdhc.h> +#endif #include <netdev.h> #define CLK_CODE(arm, ahb, sel) (((arm) << 16) + ((ahb) << 8) + (sel)) @@ -205,7 +208,7 @@ u32 imx_get_uartclk(void) return freq; } -unsigned int mxc_get_main_clock(enum mxc_main_clocks clk) +unsigned int mxc_get_main_clock(enum mxc_main_clock clk) { u32 nfc_pdf, hsp_podf; u32 pll, ret_val = 0, usb_prdf, usb_podf; @@ -270,7 +273,7 @@ unsigned int mxc_get_main_clock(enum mxc_main_clocks clk) return ret_val; } -unsigned int mxc_get_peri_clock(enum mxc_peri_clocks clk) +unsigned int mxc_get_peri_clock(enum mxc_peri_clock clk) { u32 ret_val = 0, pdf, pre_pdf, clk_sel; struct ccm_regs *ccm = @@ -463,7 +466,6 @@ int print_cpuinfo(void) * Initializes on-chip ethernet controllers. * to override, implement board_eth_init() */ - int cpu_eth_init(bd_t *bis) { int rc = -ENODEV; @@ -475,6 +477,17 @@ int cpu_eth_init(bd_t *bis) return rc; } +#ifdef CONFIG_FSL_ESDHC +/* + * Initializes on-chip MMC controllers. + * to override, implement board_mmc_init() + */ +int cpu_mmc_init(bd_t *bis) +{ + return fsl_esdhc_mmc_init(bis); +} +#endif + int get_clocks(void) { #ifdef CONFIG_FSL_ESDHC diff --git a/arch/arm/cpu/arm1136/mx35/iomux.c b/arch/arm/cpu/arm1136/mx35/iomux.c index f93191daef..a302575eda 100644 --- a/arch/arm/cpu/arm1136/mx35/iomux.c +++ b/arch/arm/cpu/arm1136/mx35/iomux.c @@ -44,8 +44,6 @@ enum iomux_reg_addr { #define MUX_INPUT_NUM_MUX \ (((IOMUXSW_INPUT_END - IOMUXSW_INPUT_CTL) >> 2) + 1) -#define PIN_TO_IOMUX_INDEX(pin) ((PIN_TO_IOMUX_PAD(pin) - 0x328) >> 2) - /* * Request ownership for an IO pin. This function has to be the first one * being called before that pin is used. diff --git a/arch/arm/cpu/arm1176/bcm2835/Makefile b/arch/arm/cpu/arm1176/bcm2835/Makefile new file mode 100644 index 0000000000..4ea6d6b89f --- /dev/null +++ b/arch/arm/cpu/arm1176/bcm2835/Makefile @@ -0,0 +1,37 @@ +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License +# version 2 as published by the Free Software Foundation. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(SOC).o + +SOBJS := lowlevel_init.o +COBJS := reset.o timer.o + +SRCS := $(SOBJS:.o=.c) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) + +all: $(obj).depend $(LIB) + +$(LIB): $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/arch/arm/cpu/arm1176/bcm2835/config.mk b/arch/arm/cpu/arm1176/bcm2835/config.mk new file mode 100644 index 0000000000..b87ce244c3 --- /dev/null +++ b/arch/arm/cpu/arm1176/bcm2835/config.mk @@ -0,0 +1,19 @@ +# +# (C) Copyright 2012 Stephen Warren +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License +# version 2 as published by the Free Software Foundation. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# Don't attempt to override the target CPU/ABI options; +# the Raspberry Pi toolchain does the right thing by default. +PLATFORM_RELFLAGS := $(filter-out -msoft-float,$(PLATFORM_RELFLAGS)) +PLATFORM_CPPFLAGS := $(filter-out -march=armv5t,$(PLATFORM_CPPFLAGS)) diff --git a/arch/arm/cpu/arm1176/bcm2835/lowlevel_init.S b/arch/arm/cpu/arm1176/bcm2835/lowlevel_init.S new file mode 100644 index 0000000000..c7b0843281 --- /dev/null +++ b/arch/arm/cpu/arm1176/bcm2835/lowlevel_init.S @@ -0,0 +1,19 @@ +/* + * (C) Copyright 2012 Stephen Warren + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +.globl lowlevel_init +lowlevel_init: + mov pc, lr diff --git a/arch/arm/cpu/arm1176/bcm2835/reset.c b/arch/arm/cpu/arm1176/bcm2835/reset.c new file mode 100644 index 0000000000..8c37ad9fd4 --- /dev/null +++ b/arch/arm/cpu/arm1176/bcm2835/reset.c @@ -0,0 +1,35 @@ +/* + * (C) Copyright 2012 Stephen Warren + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/wdog.h> + +#define RESET_TIMEOUT 10 + +void reset_cpu(ulong addr) +{ + struct bcm2835_wdog_regs *regs = + (struct bcm2835_wdog_regs *)BCM2835_WDOG_PHYSADDR; + uint32_t rstc; + + rstc = readl(®s->rstc); + rstc &= ~BCM2835_WDOG_RSTC_WRCFG_MASK; + rstc |= BCM2835_WDOG_RSTC_WRCFG_FULL_RESET; + + writel(BCM2835_WDOG_PASSWORD | RESET_TIMEOUT, ®s->wdog); + writel(BCM2835_WDOG_PASSWORD | rstc, ®s->rstc); +} diff --git a/arch/arm/cpu/arm1176/bcm2835/timer.c b/arch/arm/cpu/arm1176/bcm2835/timer.c new file mode 100644 index 0000000000..d232d7e067 --- /dev/null +++ b/arch/arm/cpu/arm1176/bcm2835/timer.c @@ -0,0 +1,55 @@ +/* + * (C) Copyright 2012 Stephen Warren + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/timer.h> + +int timer_init(void) +{ + return 0; +} + +ulong get_timer(ulong base) +{ + struct bcm2835_timer_regs *regs = + (struct bcm2835_timer_regs *)BCM2835_TIMER_PHYSADDR; + + return readl(®s->clo) - base; +} + +unsigned long long get_ticks(void) +{ + return get_timer(0); +} + +ulong get_tbclk(void) +{ + return CONFIG_SYS_HZ; +} + +void __udelay(unsigned long usec) +{ + ulong endtime; + signed long diff; + + endtime = get_timer(0) + usec; + + do { + ulong now = get_timer(0); + diff = endtime - now; + } while (diff >= 0); +} diff --git a/arch/arm/cpu/arm1176/cpu.c b/arch/arm/cpu/arm1176/cpu.c index c0fd114e16..532a90b546 100644 --- a/arch/arm/cpu/arm1176/cpu.c +++ b/arch/arm/cpu/arm1176/cpu.c @@ -65,3 +65,10 @@ static void cache_flush (void) /* mem barrier to sync things */ asm ("mcr p15, 0, %0, c7, c10, 4": :"r" (0)); } + +int arch_cpu_init(void) +{ + icache_enable(); + + return 0; +} diff --git a/arch/arm/cpu/arm720t/cpu.c b/arch/arm/cpu/arm720t/cpu.c index 974f2880a4..ce7b3c9c24 100644 --- a/arch/arm/cpu/arm720t/cpu.c +++ b/arch/arm/cpu/arm720t/cpu.c @@ -51,6 +51,8 @@ int cleanup_before_linux (void) /* Nothing more needed */ #elif defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_INTEGRATOR) /* No cleanup before linux for IntegratorAP/CM720T as yet */ +#elif defined(CONFIG_TEGRA) + /* No cleanup before linux for tegra as yet */ #else #error No cleanup_before_linux() defined for this CPU type #endif diff --git a/arch/arm/cpu/arm720t/interrupts.c b/arch/arm/cpu/arm720t/interrupts.c index 464dd30466..c2f898f2cc 100644 --- a/arch/arm/cpu/arm720t/interrupts.c +++ b/arch/arm/cpu/arm720t/interrupts.c @@ -180,6 +180,9 @@ int timer_init (void) PUT32(T0TC, 0); PUT32(T0TCR, 1); /* enable timer0 */ +#elif defined(CONFIG_TEGRA) + /* No timer routines for tegra as yet */ + lastdec = 0; #else #error No timer_init() defined for this CPU type #endif @@ -282,6 +285,8 @@ void __udelay (unsigned long usec) #elif defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_INTEGRATOR) /* No timer routines for IntegratorAP/CM720T as yet */ +#elif defined(CONFIG_TEGRA) + /* No timer routines for tegra as yet */ #else #error Timer routines not defined for this CPU type #endif diff --git a/arch/arm/cpu/arm720t/start.S b/arch/arm/cpu/arm720t/start.S index 3b97e804a6..2f914e9b4e 100644 --- a/arch/arm/cpu/arm720t/start.S +++ b/arch/arm/cpu/arm720t/start.S @@ -51,6 +51,16 @@ _start: b reset ldr pc, _irq ldr pc, _fiq +#ifdef CONFIG_SPL_BUILD +_undefined_instruction: .word _undefined_instruction +_software_interrupt: .word _software_interrupt +_prefetch_abort: .word _prefetch_abort +_data_abort: .word _data_abort +_not_used: .word _not_used +_irq: .word _irq +_fiq: .word _fiq +_pad: .word 0x12345678 /* now 16*4=64 */ +#else _undefined_instruction: .word undefined_instruction _software_interrupt: .word software_interrupt _prefetch_abort: .word prefetch_abort @@ -58,6 +68,8 @@ _data_abort: .word data_abort _not_used: .word not_used _irq: .word irq _fiq: .word fiq +_pad: .word 0x12345678 /* now 16*4=64 */ +#endif /* CONFIG_SPL_BUILD */ .balignl 16,0xdeadbeef @@ -77,7 +89,11 @@ _fiq: .word fiq .globl _TEXT_BASE _TEXT_BASE: +#ifdef CONFIG_SPL_BUILD + .word CONFIG_SPL_TEXT_BASE +#else .word CONFIG_SYS_TEXT_BASE +#endif /* * These are defined in the board-specific linker script. @@ -167,6 +183,7 @@ stack_setup: adr r0, _start cmp r0, r6 + moveq r9, #0 /* no relocation. relocation offset(r9) = 0 */ beq clear_bss /* skip relocation */ mov r1, r6 /* r1 <- scratch for copy_loop */ ldr r3, _bss_start_ofs @@ -398,6 +415,8 @@ lock_loop: ldr r0, VPBDIV_ADR mov r1, #0x01 /* VPB clock is same as process clock */ str r1, [r0] +#elif defined(CONFIG_TEGRA) + /* No cpu_init_crit for tegra as yet */ #else #error No cpu_init_crit() defined for current CPU type #endif @@ -413,7 +432,7 @@ lock_loop: str r1, [r0] #endif -#ifndef CONFIG_LPC2292 +#if !defined(CONFIG_LPC2292) && !defined(CONFIG_TEGRA) mov ip, lr /* * before relocating, we have to setup RAM timing @@ -427,6 +446,7 @@ lock_loop: mov pc, lr +#ifndef CONFIG_SPL_BUILD /* ************************************************************************* * @@ -589,6 +609,7 @@ fiq: bl do_fiq #endif +#endif /* CONFIG_SPL_BUILD */ #if defined(CONFIG_NETARM) .align 5 @@ -620,6 +641,8 @@ reset_cpu: .globl reset_cpu reset_cpu: mov pc, r0 +#elif defined(CONFIG_TEGRA) + /* No specific reset actions for tegra as yet */ #else #error No reset_cpu() defined for current CPU type #endif diff --git a/arch/arm/cpu/arm720t/tegra20/Makefile b/arch/arm/cpu/arm720t/tegra20/Makefile new file mode 100644 index 0000000000..6e484756dd --- /dev/null +++ b/arch/arm/cpu/arm720t/tegra20/Makefile @@ -0,0 +1,48 @@ +# +# (C) Copyright 2010,2011 Nvidia Corporation. +# +# (C) Copyright 2000-2008 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(SOC).o + +COBJS-y += cpu.o +COBJS-$(CONFIG_SPL_BUILD) += spl.o + +SRCS := $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS-y)) + +all: $(obj).depend $(LIB) + +$(LIB): $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/arch/arm/cpu/arm720t/tegra20/board.h b/arch/arm/cpu/arm720t/tegra20/board.h new file mode 100644 index 0000000000..61b91c005f --- /dev/null +++ b/arch/arm/cpu/arm720t/tegra20/board.h @@ -0,0 +1,25 @@ +/* + * (C) Copyright 2010-2011 + * NVIDIA Corporation <www.nvidia.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +void board_init_uart_f(void); +void gpio_config_uart(void); diff --git a/arch/arm/cpu/arm720t/tegra20/config.mk b/arch/arm/cpu/arm720t/tegra20/config.mk new file mode 100644 index 0000000000..62a31d8a62 --- /dev/null +++ b/arch/arm/cpu/arm720t/tegra20/config.mk @@ -0,0 +1,26 @@ +# +# (C) Copyright 2010,2011 +# NVIDIA Corporation <www.nvidia.com> +# +# (C) Copyright 2002 +# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# +USE_PRIVATE_LIBGCC = yes diff --git a/arch/arm/cpu/armv7/tegra2/ap20.c b/arch/arm/cpu/arm720t/tegra20/cpu.c index 1aad3879ee..6d4d66bced 100644 --- a/arch/arm/cpu/armv7/tegra2/ap20.c +++ b/arch/arm/cpu/arm720t/tegra20/cpu.c @@ -22,54 +22,17 @@ */ #include <asm/io.h> -#include <asm/arch/tegra2.h> -#include <asm/arch/ap20.h> +#include <asm/arch/tegra20.h> #include <asm/arch/clk_rst.h> #include <asm/arch/clock.h> -#include <asm/arch/fuse.h> -#include <asm/arch/gp_padctrl.h> #include <asm/arch/pmc.h> #include <asm/arch/pinmux.h> #include <asm/arch/scu.h> -#include <asm/arch/warmboot.h> #include <common.h> - -int tegra_get_chip_type(void) -{ - struct apb_misc_gp_ctlr *gp; - struct fuse_regs *fuse = (struct fuse_regs *)TEGRA2_FUSE_BASE; - uint tegra_sku_id, rev; - - /* - * This is undocumented, Chip ID is bits 15:8 of the register - * APB_MISC + 0x804, and has value 0x20 for Tegra20, 0x30 for - * Tegra30 - */ - gp = (struct apb_misc_gp_ctlr *)TEGRA2_APB_MISC_GP_BASE; - rev = (readl(&gp->hidrev) & HIDREV_CHIPID_MASK) >> HIDREV_CHIPID_SHIFT; - - tegra_sku_id = readl(&fuse->sku_info) & 0xff; - - switch (rev) { - case CHIPID_TEGRA2: - switch (tegra_sku_id) { - case SKU_ID_T20: - return TEGRA_SOC_T20; - case SKU_ID_T25SE: - case SKU_ID_AP25: - case SKU_ID_T25: - case SKU_ID_AP25E: - case SKU_ID_T25E: - return TEGRA_SOC_T25; - } - break; - } - /* unknown sku id */ - return TEGRA_SOC_UNKNOWN; -} +#include "cpu.h" /* Returns 1 if the current CPU executing is a Cortex-A9, else 0 */ -static int ap20_cpu_is_cortexa9(void) +int ap20_cpu_is_cortexa9(void) { u32 id = readb(NV_PA_PG_UP_BASE + PG_UP_TAG_0); return id == (PG_UP_TAG_0_PID_CPU & 0xff); @@ -77,10 +40,8 @@ static int ap20_cpu_is_cortexa9(void) void init_pllx(void) { - struct clk_rst_ctlr *clkrst = - (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; - struct clk_pll_simple *pll = - &clkrst->crc_pll_simple[CLOCK_ID_XCPU - CLOCK_ID_FIRST_SIMPLE]; + struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; + struct clk_pll *pll = &clkrst->crc_pll[CLOCK_ID_XCPU]; u32 reg; /* If PLLX is already enabled, just return */ @@ -144,14 +105,14 @@ static void enable_cpu_clock(int enable) static int is_cpu_powered(void) { - struct pmc_ctlr *pmc = (struct pmc_ctlr *)TEGRA2_PMC_BASE; + struct pmc_ctlr *pmc = (struct pmc_ctlr *)TEGRA20_PMC_BASE; return (readl(&pmc->pmc_pwrgate_status) & CPU_PWRED) ? 1 : 0; } static void remove_cpu_io_clamps(void) { - struct pmc_ctlr *pmc = (struct pmc_ctlr *)TEGRA2_PMC_BASE; + struct pmc_ctlr *pmc = (struct pmc_ctlr *)TEGRA20_PMC_BASE; u32 reg; /* Remove the clamps on the CPU I/O signals */ @@ -165,7 +126,7 @@ static void remove_cpu_io_clamps(void) static void powerup_cpu(void) { - struct pmc_ctlr *pmc = (struct pmc_ctlr *)TEGRA2_PMC_BASE; + struct pmc_ctlr *pmc = (struct pmc_ctlr *)TEGRA20_PMC_BASE; u32 reg; int timeout = IO_STABILIZATION_DELAY; @@ -196,7 +157,7 @@ static void powerup_cpu(void) static void enable_cpu_power_rail(void) { - struct pmc_ctlr *pmc = (struct pmc_ctlr *)TEGRA2_PMC_BASE; + struct pmc_ctlr *pmc = (struct pmc_ctlr *)TEGRA20_PMC_BASE; u32 reg; reg = readl(&pmc->pmc_cntrl); @@ -295,94 +256,3 @@ void halt_avp(void) FLOW_CTLR_HALT_COP_EVENTS); } } - -void enable_scu(void) -{ - struct scu_ctlr *scu = (struct scu_ctlr *)NV_PA_ARM_PERIPHBASE; - u32 reg; - - /* If SCU already setup/enabled, return */ - if (readl(&scu->scu_ctrl) & SCU_CTRL_ENABLE) - return; - - /* Invalidate all ways for all processors */ - writel(0xFFFF, &scu->scu_inv_all); - - /* Enable SCU - bit 0 */ - reg = readl(&scu->scu_ctrl); - reg |= SCU_CTRL_ENABLE; - writel(reg, &scu->scu_ctrl); -} - -static u32 get_odmdata(void) -{ - /* - * ODMDATA is stored in the BCT in IRAM by the BootROM. - * The BCT start and size are stored in the BIT in IRAM. - * Read the data @ bct_start + (bct_size - 12). This works - * on T20 and T30 BCTs, which are locked down. If this changes - * in new chips (T114, etc.), we can revisit this algorithm. - */ - - u32 bct_start, odmdata; - - bct_start = readl(AP20_BASE_PA_SRAM + NVBOOTINFOTABLE_BCTPTR); - odmdata = readl(bct_start + BCT_ODMDATA_OFFSET); - - return odmdata; -} - -void init_pmc_scratch(void) -{ - struct pmc_ctlr *const pmc = (struct pmc_ctlr *)TEGRA2_PMC_BASE; - u32 odmdata; - int i; - - /* SCRATCH0 is initialized by the boot ROM and shouldn't be cleared */ - for (i = 0; i < 23; i++) - writel(0, &pmc->pmc_scratch1+i); - - /* ODMDATA is for kernel use to determine RAM size, LP config, etc. */ - odmdata = get_odmdata(); - writel(odmdata, &pmc->pmc_scratch20); - -#ifdef CONFIG_TEGRA2_LP0 - /* save Sdram params to PMC 2, 4, and 24 for WB0 */ - warmboot_save_sdram_params(); -#endif -} - -void tegra2_start(void) -{ - struct pmux_tri_ctlr *pmt = (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE; - - /* If we are the AVP, start up the first Cortex-A9 */ - if (!ap20_cpu_is_cortexa9()) { - /* enable JTAG */ - writel(0xC0, &pmt->pmt_cfg_ctl); - - /* - * If we are ARM7 - give it a different stack. We are about to - * start up the A9 which will want to use this one. - */ - asm volatile("mov sp, %0\n" - : : "r"(AVP_EARLY_BOOT_STACK_LIMIT)); - - start_cpu((u32)_start); - halt_avp(); - /* not reached */ - } - - /* Init PMC scratch memory */ - init_pmc_scratch(); - - enable_scu(); - - /* enable SMP mode and FW for CPU0, by writing to Auxiliary Ctl reg */ - asm volatile( - "mrc p15, 0, r0, c1, c0, 1\n" - "orr r0, r0, #0x41\n" - "mcr p15, 0, r0, c1, c0, 1\n"); - - /* FIXME: should have ap20's L2 disabled too? */ -} diff --git a/arch/arm/cpu/arm720t/tegra20/cpu.h b/arch/arm/cpu/arm720t/tegra20/cpu.h new file mode 100644 index 0000000000..6804cd7a3d --- /dev/null +++ b/arch/arm/cpu/arm720t/tegra20/cpu.h @@ -0,0 +1,100 @@ +/* + * (C) Copyright 2010-2011 + * NVIDIA Corporation <www.nvidia.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <asm/types.h> + +/* Stabilization delays, in usec */ +#define PLL_STABILIZATION_DELAY (300) +#define IO_STABILIZATION_DELAY (1000) + +#define NVBL_PLLP_KHZ (216000) + +#define PLLX_ENABLED (1 << 30) +#define CCLK_BURST_POLICY 0x20008888 +#define SUPER_CCLK_DIVIDER 0x80000000 + +/* Calculate clock fractional divider value from ref and target frequencies */ +#define CLK_DIVIDER(REF, FREQ) ((((REF) * 2) / FREQ) - 2) + +/* Calculate clock frequency value from reference and clock divider value */ +#define CLK_FREQUENCY(REF, REG) (((REF) * 2) / (REG + 2)) + +/* AVP/CPU ID */ +#define PG_UP_TAG_0_PID_CPU 0x55555555 /* CPU aka "a9" aka "mpcore" */ +#define PG_UP_TAG_0 0x0 + +#define CORESIGHT_UNLOCK 0xC5ACCE55; + +/* AP20-Specific Base Addresses */ + +/* AP20 Base physical address of SDRAM. */ +#define AP20_BASE_PA_SDRAM 0x00000000 +/* AP20 Base physical address of internal SRAM. */ +#define AP20_BASE_PA_SRAM 0x40000000 +/* AP20 Size of internal SRAM (256KB). */ +#define AP20_BASE_PA_SRAM_SIZE 0x00040000 +/* AP20 Base physical address of flash. */ +#define AP20_BASE_PA_NOR_FLASH 0xD0000000 +/* AP20 Base physical address of boot information table. */ +#define AP20_BASE_PA_BOOT_INFO AP20_BASE_PA_SRAM + +/* + * Super-temporary stacks for EXTREMELY early startup. The values chosen for + * these addresses must be valid on ALL SOCs because this value is used before + * we are able to differentiate between the SOC types. + * + * NOTE: The since CPU's stack will eventually be moved from IRAM to SDRAM, its + * stack is placed below the AVP stack. Once the CPU stack has been moved, + * the AVP is free to use the IRAM the CPU stack previously occupied if + * it should need to do so. + * + * NOTE: In multi-processor CPU complex configurations, each processor will have + * its own stack of size CPU_EARLY_BOOT_STACK_SIZE. CPU 0 will have a + * limit of CPU_EARLY_BOOT_STACK_LIMIT. Each successive CPU will have a + * stack limit that is CPU_EARLY_BOOT_STACK_SIZE less then the previous + * CPU. + */ + +/* Common AVP early boot stack limit */ +#define AVP_EARLY_BOOT_STACK_LIMIT \ + (AP20_BASE_PA_SRAM + (AP20_BASE_PA_SRAM_SIZE/2)) +/* Common AVP early boot stack size */ +#define AVP_EARLY_BOOT_STACK_SIZE 0x1000 +/* Common CPU early boot stack limit */ +#define CPU_EARLY_BOOT_STACK_LIMIT \ + (AVP_EARLY_BOOT_STACK_LIMIT - AVP_EARLY_BOOT_STACK_SIZE) +/* Common CPU early boot stack size */ +#define CPU_EARLY_BOOT_STACK_SIZE 0x1000 + +#define EXCEP_VECTOR_CPU_RESET_VECTOR (NV_PA_EVP_BASE + 0x100) +#define CSITE_CPU_DBG0_LAR (NV_PA_CSITE_BASE + 0x10FB0) +#define CSITE_CPU_DBG1_LAR (NV_PA_CSITE_BASE + 0x12FB0) + +#define FLOW_CTLR_HALT_COP_EVENTS (NV_PA_FLOW_BASE + 4) +#define FLOW_MODE_STOP 2 +#define HALT_COP_EVENT_JTAG (1 << 28) +#define HALT_COP_EVENT_IRQ_1 (1 << 11) +#define HALT_COP_EVENT_FIQ_1 (1 << 9) + +void start_cpu(u32 reset_vector); +int ap20_cpu_is_cortexa9(void); +void halt_avp(void) __attribute__ ((noreturn)); diff --git a/arch/arm/cpu/arm720t/tegra20/spl.c b/arch/arm/cpu/arm720t/tegra20/spl.c new file mode 100644 index 0000000000..6c16dce299 --- /dev/null +++ b/arch/arm/cpu/arm720t/tegra20/spl.c @@ -0,0 +1,133 @@ +/* + * (C) Copyright 2012 + * NVIDIA Inc, <www.nvidia.com> + * + * Allen Martin <amartin@nvidia.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> +#include <asm/u-boot.h> +#include <asm/utils.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/clock.h> +#include <nand.h> +#include <mmc.h> +#include <fat.h> +#include <version.h> +#include <i2c.h> +#include <image.h> +#include <malloc.h> +#include <linux/compiler.h> +#include "board.h" +#include "cpu.h" + +#include <asm/io.h> +#include <asm/arch/tegra20.h> +#include <asm/arch/clk_rst.h> +#include <asm/arch/clock.h> +#include <asm/arch/pmc.h> +#include <asm/arch/pinmux.h> +#include <asm/arch/scu.h> +#include <common.h> + +DECLARE_GLOBAL_DATA_PTR; + +/* Define global data structure pointer to it*/ +static gd_t gdata __attribute__ ((section(".data"))); +static bd_t bdata __attribute__ ((section(".data"))); + +inline void hang(void) +{ + puts("### ERROR ### Please RESET the board ###\n"); + for (;;) + ; +} + +void board_init_f(ulong dummy) +{ + board_init_uart_f(); + + /* Initialize periph GPIOs */ +#ifdef CONFIG_SPI_UART_SWITCH + gpio_early_init_uart(); +#else + gpio_config_uart(); +#endif + + /* + * We call relocate_code() with relocation target same as the + * CONFIG_SYS_SPL_TEXT_BASE. This will result in relocation getting + * skipped. Instead, only .bss initialization will happen. That's + * all we need + */ + debug(">>board_init_f()\n"); + relocate_code(CONFIG_SPL_STACK, &gdata, CONFIG_SPL_TEXT_BASE); +} + +/* This requires UART clocks to be enabled */ +static void preloader_console_init(void) +{ + const char *u_boot_rev = U_BOOT_VERSION; + + gd = &gdata; + gd->bd = &bdata; + gd->flags |= GD_FLG_RELOC; + gd->baudrate = CONFIG_BAUDRATE; + + serial_init(); /* serial communications setup */ + + gd->have_console = 1; + + /* Avoid a second "U-Boot" coming from this string */ + u_boot_rev = &u_boot_rev[7]; + + printf("\nU-Boot SPL %s (%s - %s)\n", u_boot_rev, U_BOOT_DATE, + U_BOOT_TIME); +} + +void board_init_r(gd_t *id, ulong dummy) +{ + struct pmux_tri_ctlr *pmt = (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE; + + /* enable JTAG */ + writel(0xC0, &pmt->pmt_cfg_ctl); + + debug(">>spl:board_init_r()\n"); + + mem_malloc_init(CONFIG_SYS_SPL_MALLOC_START, + CONFIG_SYS_SPL_MALLOC_SIZE); + +#ifdef CONFIG_SPL_BOARD_INIT + spl_board_init(); +#endif + + clock_early_init(); + serial_init(); + preloader_console_init(); + + start_cpu((u32)CONFIG_SYS_TEXT_BASE); + halt_avp(); + /* not reached */ +} + +int board_usb_init(const void *blob) +{ + return 0; +} diff --git a/arch/arm/cpu/arm926ejs/at91/Makefile b/arch/arm/cpu/arm926ejs/at91/Makefile index f333753c71..346e58faee 100644 --- a/arch/arm/cpu/arm926ejs/at91/Makefile +++ b/arch/arm/cpu/arm926ejs/at91/Makefile @@ -35,6 +35,7 @@ COBJS-$(CONFIG_AT91SAM9263) += at91sam9263_devices.o COBJS-$(CONFIG_AT91SAM9RL) += at91sam9rl_devices.o COBJS-$(CONFIG_AT91SAM9M10G45) += at91sam9m10g45_devices.o COBJS-$(CONFIG_AT91SAM9G45) += at91sam9m10g45_devices.o +COBJS-$(CONFIG_AT91SAM9X5) += at91sam9x5_devices.o COBJS-$(CONFIG_AT91_EFLASH) += eflash.o COBJS-$(CONFIG_AT91_LED) += led.o COBJS-y += clock.o diff --git a/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c b/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c index 62f76fa8e3..19ec615c72 100644 --- a/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c +++ b/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c @@ -158,6 +158,10 @@ void at91_spi1_hw_init(unsigned long cs_mask) #ifdef CONFIG_MACB void at91_macb_hw_init(void) { + /* Enable EMAC clock */ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + writel(1 << ATMEL_ID_EMAC0, &pmc->pcer); + at91_set_a_periph(AT91_PIO_PORTA, 19, 0); /* ETXCK_EREFCK */ at91_set_a_periph(AT91_PIO_PORTA, 17, 0); /* ERXDV */ at91_set_a_periph(AT91_PIO_PORTA, 14, 0); /* ERX0 */ diff --git a/arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c b/arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c new file mode 100644 index 0000000000..6d77219d0d --- /dev/null +++ b/arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c @@ -0,0 +1,232 @@ +/* + * Copyright (C) 2012 Atmel Corporation + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/arch/at91_common.h> +#include <asm/arch/at91_pmc.h> +#include <asm/arch/gpio.h> +#include <asm/io.h> + +unsigned int get_chip_id(void) +{ + /* The 0x40 is the offset of cidr in DBGU */ + return readl(ATMEL_BASE_DBGU + 0x40) & ~ARCH_ID_VERSION_MASK; +} + +unsigned int get_extension_chip_id(void) +{ + /* The 0x44 is the offset of exid in DBGU */ + return readl(ATMEL_BASE_DBGU + 0x44); +} + +unsigned int has_emac1() +{ + return cpu_is_at91sam9x25(); +} + +unsigned int has_emac0() +{ + return !(cpu_is_at91sam9g15()); +} + +unsigned int has_lcdc() +{ + return cpu_is_at91sam9g15() || cpu_is_at91sam9g35() + || cpu_is_at91sam9x35(); +} + +char *get_cpu_name() +{ + unsigned int extension_id = get_extension_chip_id(); + + if (cpu_is_at91sam9x5()) { + switch (extension_id) { + case ARCH_EXID_AT91SAM9G15: + return CONFIG_SYS_AT91_G15_CPU_NAME; + case ARCH_EXID_AT91SAM9G25: + return CONFIG_SYS_AT91_G25_CPU_NAME; + case ARCH_EXID_AT91SAM9G35: + return CONFIG_SYS_AT91_G35_CPU_NAME; + case ARCH_EXID_AT91SAM9X25: + return CONFIG_SYS_AT91_X25_CPU_NAME; + case ARCH_EXID_AT91SAM9X35: + return CONFIG_SYS_AT91_X35_CPU_NAME; + default: + return CONFIG_SYS_AT91_UNKNOWN_CPU; + } + } else { + return CONFIG_SYS_AT91_UNKNOWN_CPU; + } +} + +void at91_seriald_hw_init(void) +{ + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; + + at91_set_a_periph(AT91_PIO_PORTA, 9, 0); /* DRXD */ + at91_set_a_periph(AT91_PIO_PORTA, 10, 1); /* DTXD */ + + writel(1 << ATMEL_ID_SYS, &pmc->pcer); +} + +void at91_serial0_hw_init(void) +{ + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; + + at91_set_a_periph(AT91_PIO_PORTA, 0, 1); /* TXD */ + at91_set_a_periph(AT91_PIO_PORTA, 1, 0); /* RXD */ + + writel(1 << ATMEL_ID_USART0, &pmc->pcer); +} + +void at91_serial1_hw_init(void) +{ + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; + + at91_set_a_periph(AT91_PIO_PORTA, 5, 1); /* TXD */ + at91_set_a_periph(AT91_PIO_PORTA, 6, 0); /* RXD */ + + writel(1 << ATMEL_ID_USART1, &pmc->pcer); +} + +void at91_serial2_hw_init(void) +{ + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; + + at91_set_a_periph(AT91_PIO_PORTA, 7, 1); /* TXD */ + at91_set_a_periph(AT91_PIO_PORTA, 8, 0); /* RXD */ + + writel(1 << ATMEL_ID_USART2, &pmc->pcer); +} + +#ifdef CONFIG_ATMEL_SPI +void at91_spi0_hw_init(unsigned long cs_mask) +{ + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; + + at91_set_a_periph(AT91_PIO_PORTA, 11, 0); /* SPI0_MISO */ + at91_set_a_periph(AT91_PIO_PORTA, 12, 0); /* SPI0_MOSI */ + at91_set_a_periph(AT91_PIO_PORTA, 13, 0); /* SPI0_SPCK */ + + /* Enable clock */ + writel(1 << ATMEL_ID_SPI0, &pmc->pcer); + + if (cs_mask & (1 << 0)) + at91_set_a_periph(AT91_PIO_PORTA, 14, 0); + if (cs_mask & (1 << 1)) + at91_set_b_periph(AT91_PIO_PORTA, 7, 0); + if (cs_mask & (1 << 2)) + at91_set_b_periph(AT91_PIO_PORTA, 1, 0); + if (cs_mask & (1 << 3)) + at91_set_b_periph(AT91_PIO_PORTB, 3, 0); + if (cs_mask & (1 << 4)) + at91_set_pio_output(AT91_PIO_PORTA, 14, 0); + if (cs_mask & (1 << 5)) + at91_set_pio_output(AT91_PIO_PORTA, 7, 0); + if (cs_mask & (1 << 6)) + at91_set_pio_output(AT91_PIO_PORTA, 1, 0); + if (cs_mask & (1 << 7)) + at91_set_pio_output(AT91_PIO_PORTB, 3, 0); +} + +void at91_spi1_hw_init(unsigned long cs_mask) +{ + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; + + at91_set_b_periph(AT91_PIO_PORTA, 21, 0); /* SPI1_MISO */ + at91_set_b_periph(AT91_PIO_PORTA, 22, 0); /* SPI1_MOSI */ + at91_set_b_periph(AT91_PIO_PORTA, 23, 0); /* SPI1_SPCK */ + + /* Enable clock */ + writel(1 << ATMEL_ID_SPI1, &pmc->pcer); + + if (cs_mask & (1 << 0)) + at91_set_b_periph(AT91_PIO_PORTA, 8, 0); + if (cs_mask & (1 << 1)) + at91_set_b_periph(AT91_PIO_PORTA, 0, 0); + if (cs_mask & (1 << 2)) + at91_set_b_periph(AT91_PIO_PORTA, 31, 0); + if (cs_mask & (1 << 3)) + at91_set_b_periph(AT91_PIO_PORTA, 30, 0); + if (cs_mask & (1 << 4)) + at91_set_pio_output(AT91_PIO_PORTA, 8, 0); + if (cs_mask & (1 << 5)) + at91_set_pio_output(AT91_PIO_PORTA, 0, 0); + if (cs_mask & (1 << 6)) + at91_set_pio_output(AT91_PIO_PORTA, 31, 0); + if (cs_mask & (1 << 7)) + at91_set_pio_output(AT91_PIO_PORTA, 30, 0); +} +#endif + +#ifdef CONFIG_MACB +void at91_macb_hw_init(void) +{ + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; + + if (has_emac0()) { + /* Enable EMAC0 clock */ + writel(1 << ATMEL_ID_EMAC0, &pmc->pcer); + /* EMAC0 pins setup */ + at91_set_a_periph(AT91_PIO_PORTB, 4, 0); /* ETXCK */ + at91_set_a_periph(AT91_PIO_PORTB, 3, 0); /* ERXDV */ + at91_set_a_periph(AT91_PIO_PORTB, 0, 0); /* ERX0 */ + at91_set_a_periph(AT91_PIO_PORTB, 1, 0); /* ERX1 */ + at91_set_a_periph(AT91_PIO_PORTB, 2, 0); /* ERXER */ + at91_set_a_periph(AT91_PIO_PORTB, 7, 0); /* ETXEN */ + at91_set_a_periph(AT91_PIO_PORTB, 9, 0); /* ETX0 */ + at91_set_a_periph(AT91_PIO_PORTB, 10, 0); /* ETX1 */ + at91_set_a_periph(AT91_PIO_PORTB, 5, 0); /* EMDIO */ + at91_set_a_periph(AT91_PIO_PORTB, 6, 0); /* EMDC */ + } + + if (has_emac1()) { + /* Enable EMAC1 clock */ + writel(1 << ATMEL_ID_EMAC1, &pmc->pcer); + /* EMAC1 pins setup */ + at91_set_b_periph(AT91_PIO_PORTC, 29, 0); /* ETXCK */ + at91_set_b_periph(AT91_PIO_PORTC, 28, 0); /* ECRSDV */ + at91_set_b_periph(AT91_PIO_PORTC, 20, 0); /* ERXO */ + at91_set_b_periph(AT91_PIO_PORTC, 21, 0); /* ERX1 */ + at91_set_b_periph(AT91_PIO_PORTC, 16, 0); /* ERXER */ + at91_set_b_periph(AT91_PIO_PORTC, 27, 0); /* ETXEN */ + at91_set_b_periph(AT91_PIO_PORTC, 18, 0); /* ETX0 */ + at91_set_b_periph(AT91_PIO_PORTC, 19, 0); /* ETX1 */ + at91_set_b_periph(AT91_PIO_PORTC, 31, 0); /* EMDIO */ + at91_set_b_periph(AT91_PIO_PORTC, 30, 0); /* EMDC */ + } + +#ifndef CONFIG_RMII + /* Only emac0 support MII */ + if (has_emac0()) { + at91_set_b_periph(AT91_PIO_PORTB, 16, 0); /* ECRS */ + at91_set_b_periph(AT91_PIO_PORTB, 17, 0); /* ECOL */ + at91_set_b_periph(AT91_PIO_PORTB, 13, 0); /* ERX2 */ + at91_set_b_periph(AT91_PIO_PORTB, 14, 0); /* ERX3 */ + at91_set_b_periph(AT91_PIO_PORTB, 15, 0); /* ERXCK */ + at91_set_b_periph(AT91_PIO_PORTB, 11, 0); /* ETX2 */ + at91_set_b_periph(AT91_PIO_PORTB, 12, 0); /* ETX3 */ + at91_set_b_periph(AT91_PIO_PORTB, 8, 0); /* ETXER */ + } +#endif +} +#endif diff --git a/arch/arm/cpu/arm926ejs/at91/clock.c b/arch/arm/cpu/arm926ejs/at91/clock.c index a7085deac0..dc5c6c4b0b 100644 --- a/arch/arm/cpu/arm926ejs/at91/clock.c +++ b/arch/arm/cpu/arm926ejs/at91/clock.c @@ -154,7 +154,8 @@ int at91_clock_init(unsigned long main_clock) * For now, assume this parentage won't change. */ mckr = readl(&pmc->mckr); -#if defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) +#if defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) \ + || defined(CONFIG_AT91SAM9X5) /* plla divisor by 2 */ gd->plla_rate_hz /= (1 << ((mckr & 1 << 12) >> 12)); #endif @@ -168,7 +169,14 @@ int at91_clock_init(unsigned long main_clock) freq / ((mckr & AT91_PMC_MCKR_MDIV_MASK) >> 7) : freq; if (mckr & AT91_PMC_MCKR_MDIV_MASK) freq /= 2; /* processor clock division */ -#elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) +#elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) \ + || defined(CONFIG_AT91SAM9X5) + /* mdiv <==> divisor + * 0 <==> 1 + * 1 <==> 2 + * 2 <==> 4 + * 3 <==> 3 + */ gd->mck_rate_hz = (mckr & AT91_PMC_MCKR_MDIV_MASK) == (AT91_PMC_MCKR_MDIV_2 | AT91_PMC_MCKR_MDIV_4) ? freq / 3 diff --git a/arch/arm/cpu/arm926ejs/davinci/Makefile b/arch/arm/cpu/arm926ejs/davinci/Makefile index da7efac085..c91928e71d 100644 --- a/arch/arm/cpu/arm926ejs/davinci/Makefile +++ b/arch/arm/cpu/arm926ejs/davinci/Makefile @@ -27,7 +27,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(SOC).o -COBJS-y += cpu.o misc.o timer.o psc.o pinmux.o +COBJS-y += cpu.o misc.o timer.o psc.o pinmux.o reset.o COBJS-$(CONFIG_DA850_LOWLEVEL) += da850_lowlevel.o COBJS-$(CONFIG_SOC_DM355) += dm355.o COBJS-$(CONFIG_SOC_DM365) += dm365.o @@ -42,8 +42,6 @@ COBJS-$(CONFIG_SOC_DM365) += dm365_lowlevel.o COBJS-$(CONFIG_SOC_DA8XX) += da850_lowlevel.o endif -SOBJS = reset.o - ifndef CONFIG_SKIP_LOWLEVEL_INIT SOBJS += lowlevel_init.o endif diff --git a/arch/arm/cpu/arm926ejs/davinci/cpu.c b/arch/arm/cpu/arm926ejs/davinci/cpu.c index 6cb857aef5..b31add8deb 100644 --- a/arch/arm/cpu/arm926ejs/davinci/cpu.c +++ b/arch/arm/cpu/arm926ejs/davinci/cpu.c @@ -117,6 +117,17 @@ int clk_get(enum davinci_clk_ids id) out: return pll_out; } + +int set_cpu_clk_info(void) +{ + gd->bd->bi_arm_freq = clk_get(DAVINCI_ARM_CLKID) / 1000000; + /* DDR PHY uses an x2 input clock */ + gd->bd->bi_ddr_freq = cpu_is_da830() ? 0 : + (clk_get(DAVINCI_DDR_CLKID) / 1000000); + gd->bd->bi_dsp_freq = 0; + return 0; +} + #else /* CONFIG_SOC_DA8XX */ static unsigned pll_div(volatile void *pllbase, unsigned offset) @@ -187,16 +198,9 @@ unsigned int davinci_clk_get(unsigned int div) return pll_sysclk_mhz(DAVINCI_PLL_CNTRL0_BASE, div) * 1000000; } #endif -#endif /* !CONFIG_SOC_DA8XX */ int set_cpu_clk_info(void) { -#ifdef CONFIG_SOC_DA8XX - gd->bd->bi_arm_freq = clk_get(DAVINCI_ARM_CLKID) / 1000000; - /* DDR PHY uses an x2 input clock */ - gd->bd->bi_ddr_freq = clk_get(0x10001) / 1000000; -#else - unsigned int pllbase = DAVINCI_PLL_CNTRL0_BASE; #if defined(CONFIG_SOC_DM365) pllbase = DAVINCI_PLL_CNTRL1_BASE; @@ -215,10 +219,12 @@ int set_cpu_clk_info(void) pllbase = DAVINCI_PLL_CNTRL0_BASE; #endif gd->bd->bi_ddr_freq = pll_sysclk_mhz(pllbase, DDR_PLLDIV) / 2; -#endif + return 0; } +#endif /* !CONFIG_SOC_DA8XX */ + /* * Initializes on-chip ethernet controllers. * to override, implement board_eth_init() diff --git a/arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c b/arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c index df7d6a24ba..ff2e2e33df 100644 --- a/arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c +++ b/arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c @@ -190,13 +190,21 @@ int da850_ddr_setup(void) setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_LOCK); setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_POWERDWN); - - setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_IOPWRDWN); } - + setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_IOPWRDWN); writel(CONFIG_SYS_DA850_DDR2_DDRPHYCR, &dv_ddr2_regs_ctrl->ddrphycr); - clrbits_le32(&davinci_syscfg1_regs->ddr_slew, - (1 << DDR_SLEW_CMOSEN_BIT)); + + if (CONFIG_SYS_DA850_DDR2_SDBCR & (1 << DV_DDR_SDCR_DDR2EN_SHIFT)) { + /* DDR2 */ + clrbits_le32(&davinci_syscfg1_regs->ddr_slew, + (1 << DDR_SLEW_DDR_PDENA_BIT) | + (1 << DDR_SLEW_CMOSEN_BIT)); + } else { + /* MOBILE DDR */ + setbits_le32(&davinci_syscfg1_regs->ddr_slew, + (1 << DDR_SLEW_DDR_PDENA_BIT) | + (1 << DDR_SLEW_CMOSEN_BIT)); + } /* * SDRAM Configuration Register (SDCR): @@ -216,7 +224,11 @@ int da850_ddr_setup(void) writel(tmp, &dv_ddr2_regs_ctrl->sdbcr); /* write memory configuration and timing */ - writel(CONFIG_SYS_DA850_DDR2_SDBCR2, &dv_ddr2_regs_ctrl->sdbcr2); + if (!(CONFIG_SYS_DA850_DDR2_SDBCR & (1 << DV_DDR_SDCR_DDR2EN_SHIFT))) { + /* MOBILE DDR only*/ + writel(CONFIG_SYS_DA850_DDR2_SDBCR2, + &dv_ddr2_regs_ctrl->sdbcr2); + } writel(CONFIG_SYS_DA850_DDR2_SDTIMR, &dv_ddr2_regs_ctrl->sdtimr); writel(CONFIG_SYS_DA850_DDR2_SDTIMR2, &dv_ddr2_regs_ctrl->sdtimr2); @@ -240,7 +252,7 @@ int da850_ddr_setup(void) /* disable self refresh */ clrbits_le32(&dv_ddr2_regs_ctrl->sdrcr, - DV_DDR_SDRCR_LPMODEN | DV_DDR_SDRCR_LPMODEN); + DV_DDR_SDRCR_LPMODEN | DV_DDR_SDRCR_MCLKSTOPEN); writel(CONFIG_SYS_DA850_DDR2_PBBPR, &dv_ddr2_regs_ctrl->pbbpr); return 0; diff --git a/arch/arm/cpu/arm926ejs/davinci/da850_pinmux.c b/arch/arm/cpu/arm926ejs/davinci/da850_pinmux.c index fa07fb591f..133265e5b0 100644 --- a/arch/arm/cpu/arm926ejs/davinci/da850_pinmux.c +++ b/arch/arm/cpu/arm926ejs/davinci/da850_pinmux.c @@ -35,6 +35,11 @@ const struct pinmux_config spi1_pins_scs0[] = { }; /* UART pin muxer settings */ +const struct pinmux_config uart0_pins_txrx[] = { + { pinmux(3), 2, 4 }, /* UART0_RXD */ + { pinmux(3), 2, 5 }, /* UART0_TXD */ +}; + const struct pinmux_config uart1_pins_txrx[] = { { pinmux(4), 2, 6 }, /* UART1_RXD */ { pinmux(4), 2, 7 }, /* UART1_TXD */ @@ -169,3 +174,14 @@ const struct pinmux_config emifa_pins_nor[] = { { pinmux(12), 1, 6 }, /* EMA_A[1] */ { pinmux(12), 1, 7 }, /* EMA_A[0] */ }; + +/* MMC0 pin muxer settings */ +const struct pinmux_config mmc0_pins[] = { + { pinmux(10), 2, 0 }, /* MMCSD0_CLK */ + { pinmux(10), 2, 1 }, /* MMCSD0_CMD */ + { pinmux(10), 2, 2 }, /* MMCSD0_DAT_0 */ + { pinmux(10), 2, 3 }, /* MMCSD0_DAT_1 */ + { pinmux(10), 2, 4 }, /* MMCSD0_DAT_2 */ + { pinmux(10), 2, 5 }, /* MMCSD0_DAT_3 */ + /* DA850 supports only 4-bit mode, remaining pins are not configured */ +}; diff --git a/arch/arm/cpu/arm926ejs/davinci/psc.c b/arch/arm/cpu/arm926ejs/davinci/psc.c index 3e925181ea..2ffb42abca 100644 --- a/arch/arm/cpu/arm926ejs/davinci/psc.c +++ b/arch/arm/cpu/arm926ejs/davinci/psc.c @@ -128,6 +128,11 @@ void lpsc_syncreset(unsigned int id) lpsc_transition(id, 0x01); } +void lpsc_disable(unsigned int id) +{ + lpsc_transition(id, 0x0); +} + /* Not all DaVinci chips have a DSP power domain. */ #ifdef CONFIG_SOC_DM644X diff --git a/arch/arm/cpu/arm926ejs/davinci/reset.S b/arch/arm/cpu/arm926ejs/davinci/reset.S deleted file mode 100644 index ba0a7c3b4b..0000000000 --- a/arch/arm/cpu/arm926ejs/davinci/reset.S +++ /dev/null @@ -1,81 +0,0 @@ -/* - * Processor reset using WDT for TI TMS320DM644x SoC. - * - * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> - * - * ----------------------------------------------------- - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -.globl reset_cpu -reset_cpu: - ldr r0, WDT_TGCR - mov r1, $0x08 - str r1, [r0] - ldr r1, [r0] - orr r1, r1, $0x03 - str r1, [r0] - mov r1, $0 - ldr r0, WDT_TIM12 - str r1, [r0] - ldr r0, WDT_TIM34 - str r1, [r0] - ldr r0, WDT_PRD12 - str r1, [r0] - ldr r0, WDT_PRD34 - str r1, [r0] - ldr r0, WDT_TCR - ldr r1, [r0] - orr r1, r1, $0x40 - str r1, [r0] - ldr r0, WDT_WDTCR - ldr r1, [r0] - orr r1, r1, $0x4000 - str r1, [r0] - ldr r1, WDTCR_VAL1 - str r1, [r0] - ldr r1, WDTCR_VAL2 - str r1, [r0] - /* Write an invalid value to the WDKEY field to trigger - * an immediate watchdog reset */ - mov r1, $0x4000 - str r1, [r0] - nop - nop - nop - nop -reset_cpu_loop: - b reset_cpu_loop - -WDT_TGCR: - .word 0x01c21c24 -WDT_TIM12: - .word 0x01c21c10 -WDT_TIM34: - .word 0x01c21c14 -WDT_PRD12: - .word 0x01c21c18 -WDT_PRD34: - .word 0x01c21c1c -WDT_TCR: - .word 0x01c21c20 -WDT_WDTCR: - .word 0x01c21c28 -WDTCR_VAL1: - .word 0xa5c64000 -WDTCR_VAL2: - .word 0xda7e4000 diff --git a/arch/arm/cpu/arm926ejs/davinci/reset.c b/arch/arm/cpu/arm926ejs/davinci/reset.c new file mode 100644 index 0000000000..968fb035c8 --- /dev/null +++ b/arch/arm/cpu/arm926ejs/davinci/reset.c @@ -0,0 +1,33 @@ +/* + * Processor reset using WDT. + * + * Copyright (C) 2012 Dmitry Bondar <bond@inmys.ru> + * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> + * + * This file is released under the terms of GPL v2 and any later version. + * See the file COPYING in the root directory of the source tree for details. +*/ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/timer_defs.h> +#include <asm/arch/hardware.h> + +void reset_cpu(unsigned long a) +{ + struct davinci_timer *const wdttimer = + (struct davinci_timer *)DAVINCI_TIMER1_BASE; + writel(0x08, &wdttimer->tgcr); + writel(readl(&wdttimer->tgcr) | 0x03, &wdttimer->tgcr); + writel(0, &wdttimer->tim12); + writel(0, &wdttimer->tim34); + writel(0, &wdttimer->prd12); + writel(0, &wdttimer->prd34); + writel(readl(&wdttimer->tcr) | 0x40, &wdttimer->tcr); + writel(readl(&wdttimer->wdtcr) | 0x4000, &wdttimer->wdtcr); + writel(0xa5c64000, &wdttimer->wdtcr); + writel(0xda7e4000, &wdttimer->wdtcr); + writel(0x4000, &wdttimer->wdtcr); + while (1) + /*nothing*/; +} diff --git a/arch/arm/cpu/arm926ejs/davinci/spl.c b/arch/arm/cpu/arm926ejs/davinci/spl.c index 74632e5161..03c85c87fb 100644 --- a/arch/arm/cpu/arm926ejs/davinci/spl.c +++ b/arch/arm/cpu/arm926ejs/davinci/spl.c @@ -28,6 +28,7 @@ #include <ns16550.h> #include <malloc.h> #include <spi_flash.h> +#include <mmc.h> #ifdef CONFIG_SPL_LIBCOMMON_SUPPORT @@ -74,12 +75,7 @@ void board_init_f(ulong dummy) void board_init_r(gd_t *id, ulong dummy) { -#ifdef CONFIG_SPL_NAND_LOAD - nand_init(); - puts("Nand boot...\n"); - nand_boot(); -#endif -#ifdef CONFIG_SPL_SPI_LOAD +#ifdef CONFIG_SPL_LIBCOMMON_SUPPORT mem_malloc_init(CONFIG_SYS_TEXT_BASE - CONFIG_SYS_MALLOC_LEN, CONFIG_SYS_MALLOC_LEN); @@ -90,7 +86,19 @@ void board_init_r(gd_t *id, ulong dummy) serial_init(); /* serial communications setup */ gd->have_console = 1; +#endif + +#ifdef CONFIG_SPL_NAND_LOAD + nand_init(); + puts("Nand boot...\n"); + nand_boot(); +#endif +#ifdef CONFIG_SPL_SPI_LOAD puts("SPI boot...\n"); spi_boot(); #endif +#ifdef CONFIG_SPL_MMC_LOAD + puts("MMC boot...\n"); + spl_mmc_load(); +#endif } diff --git a/arch/arm/cpu/arm926ejs/mx25/generic.c b/arch/arm/cpu/arm926ejs/mx25/generic.c index 8b07dae2b9..a412a8fe20 100644 --- a/arch/arm/cpu/arm926ejs/mx25/generic.c +++ b/arch/arm/cpu/arm926ejs/mx25/generic.c @@ -186,6 +186,14 @@ int print_cpuinfo(void) } #endif +void enable_caches(void) +{ +#ifndef CONFIG_SYS_DCACHE_OFF + /* Enable D-cache. I-cache is already enabled in start.S */ + dcache_enable(); +#endif +} + int cpu_eth_init(bd_t *bis) { #if defined(CONFIG_FEC_MXC) diff --git a/arch/arm/cpu/arm926ejs/mx27/generic.c b/arch/arm/cpu/arm926ejs/mx27/generic.c index 65c4813784..41bb84bb6e 100644 --- a/arch/arm/cpu/arm926ejs/mx27/generic.c +++ b/arch/arm/cpu/arm926ejs/mx27/generic.c @@ -24,6 +24,7 @@ #include <asm/io.h> #include <asm/arch/imx-regs.h> #include <asm/arch/clock.h> +#include <asm/arch/gpio.h> #ifdef CONFIG_MXC_MMC #include <asm/arch/mxcmmc.h> #endif @@ -209,7 +210,7 @@ int cpu_mmc_init(bd_t *bis) void imx_gpio_mode(int gpio_mode) { - struct gpio_regs *regs = (struct gpio_regs *)IMX_GPIO_BASE; + struct gpio_port_regs *regs = (struct gpio_port_regs *)IMX_GPIO_BASE; unsigned int pin = gpio_mode & GPIO_PIN_MASK; unsigned int port = (gpio_mode & GPIO_PORT_MASK) >> GPIO_PORT_SHIFT; unsigned int ocr = (gpio_mode & GPIO_OCR_MASK) >> GPIO_OCR_SHIFT; @@ -228,11 +229,11 @@ void imx_gpio_mode(int gpio_mode) /* Data direction */ if (gpio_mode & GPIO_OUT) { - writel(readl(®s->port[port].ddir) | 1 << pin, - ®s->port[port].ddir); + writel(readl(®s->port[port].gpio_dir) | 1 << pin, + ®s->port[port].gpio_dir); } else { - writel(readl(®s->port[port].ddir) & ~(1 << pin), - ®s->port[port].ddir); + writel(readl(®s->port[port].gpio_dir) & ~(1 << pin), + ®s->port[port].gpio_dir); } /* Primary / alternate function */ diff --git a/arch/arm/cpu/arm926ejs/mx28/Makefile b/arch/arm/cpu/arm926ejs/mxs/Makefile index 674a3af1be..eeecf89f8b 100644 --- a/arch/arm/cpu/arm926ejs/mx28/Makefile +++ b/arch/arm/cpu/arm926ejs/mxs/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(SOC).o -COBJS = clock.o mx28.o iomux.o timer.o +COBJS = clock.o mxs.o iomux.o timer.o ifdef CONFIG_SPL_BUILD COBJS += spl_boot.o spl_lradc_init.o spl_mem_init.o spl_power_init.o diff --git a/arch/arm/cpu/arm926ejs/mx28/clock.c b/arch/arm/cpu/arm926ejs/mxs/clock.c index 0439f9c0ea..bfea6abeb0 100644 --- a/arch/arm/cpu/arm926ejs/mx28/clock.c +++ b/arch/arm/cpu/arm926ejs/mxs/clock.c @@ -43,8 +43,8 @@ static uint32_t mx28_get_pclk(void) { - struct mx28_clkctrl_regs *clkctrl_regs = - (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE; + struct mxs_clkctrl_regs *clkctrl_regs = + (struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE; uint32_t clkctrl, clkseq, div; uint8_t clkfrac, frac; @@ -75,8 +75,8 @@ static uint32_t mx28_get_pclk(void) static uint32_t mx28_get_hclk(void) { - struct mx28_clkctrl_regs *clkctrl_regs = - (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE; + struct mxs_clkctrl_regs *clkctrl_regs = + (struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE; uint32_t div; uint32_t clkctrl; @@ -93,8 +93,8 @@ static uint32_t mx28_get_hclk(void) static uint32_t mx28_get_emiclk(void) { - struct mx28_clkctrl_regs *clkctrl_regs = - (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE; + struct mxs_clkctrl_regs *clkctrl_regs = + (struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE; uint32_t clkctrl, clkseq, div; uint8_t clkfrac, frac; @@ -118,8 +118,8 @@ static uint32_t mx28_get_emiclk(void) static uint32_t mx28_get_gpmiclk(void) { - struct mx28_clkctrl_regs *clkctrl_regs = - (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE; + struct mxs_clkctrl_regs *clkctrl_regs = + (struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE; uint32_t clkctrl, clkseq, div; uint8_t clkfrac, frac; @@ -145,8 +145,8 @@ static uint32_t mx28_get_gpmiclk(void) */ void mx28_set_ioclk(enum mxs_ioclock io, uint32_t freq) { - struct mx28_clkctrl_regs *clkctrl_regs = - (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE; + struct mxs_clkctrl_regs *clkctrl_regs = + (struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE; uint32_t div; int io_reg; @@ -178,8 +178,8 @@ void mx28_set_ioclk(enum mxs_ioclock io, uint32_t freq) */ static uint32_t mx28_get_ioclk(enum mxs_ioclock io) { - struct mx28_clkctrl_regs *clkctrl_regs = - (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE; + struct mxs_clkctrl_regs *clkctrl_regs = + (struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE; uint8_t ret; int io_reg; @@ -199,15 +199,15 @@ static uint32_t mx28_get_ioclk(enum mxs_ioclock io) */ void mx28_set_sspclk(enum mxs_sspclock ssp, uint32_t freq, int xtal) { - struct mx28_clkctrl_regs *clkctrl_regs = - (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE; + struct mxs_clkctrl_regs *clkctrl_regs = + (struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE; uint32_t clk, clkreg; if (ssp > MXC_SSPCLK3) return; clkreg = (uint32_t)(&clkctrl_regs->hw_clkctrl_ssp0) + - (ssp * sizeof(struct mx28_register_32)); + (ssp * sizeof(struct mxs_register_32)); clrbits_le32(clkreg, CLKCTRL_SSP_CLKGATE); while (readl(clkreg) & CLKCTRL_SSP_CLKGATE) @@ -243,8 +243,8 @@ void mx28_set_sspclk(enum mxs_sspclock ssp, uint32_t freq, int xtal) */ static uint32_t mx28_get_sspclk(enum mxs_sspclock ssp) { - struct mx28_clkctrl_regs *clkctrl_regs = - (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE; + struct mxs_clkctrl_regs *clkctrl_regs = + (struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE; uint32_t clkreg; uint32_t clk, tmp; @@ -256,7 +256,7 @@ static uint32_t mx28_get_sspclk(enum mxs_sspclock ssp) return XTAL_FREQ_KHZ; clkreg = (uint32_t)(&clkctrl_regs->hw_clkctrl_ssp0) + - (ssp * sizeof(struct mx28_register_32)); + (ssp * sizeof(struct mxs_register_32)); tmp = readl(clkreg) & CLKCTRL_SSP_DIV_MASK; @@ -273,12 +273,12 @@ static uint32_t mx28_get_sspclk(enum mxs_sspclock ssp) */ void mx28_set_ssp_busclock(unsigned int bus, uint32_t freq) { - struct mx28_ssp_regs *ssp_regs; + struct mxs_ssp_regs *ssp_regs; const uint32_t sspclk = mx28_get_sspclk(bus); uint32_t reg; uint32_t divide, rate, tgtclk; - ssp_regs = (struct mx28_ssp_regs *)(MXS_SSP0_BASE + (bus * 0x2000)); + ssp_regs = (struct mxs_ssp_regs *)(MXS_SSP0_BASE + (bus * 0x2000)); /* * SSP bit rate = SSPCLK / (CLOCK_DIVIDE * (1 + CLOCK_RATE)), diff --git a/arch/arm/cpu/arm926ejs/mx28/iomux.c b/arch/arm/cpu/arm926ejs/mxs/iomux.c index 12916b6d60..73f1446907 100644 --- a/arch/arm/cpu/arm926ejs/mx28/iomux.c +++ b/arch/arm/cpu/arm926ejs/mxs/iomux.c @@ -43,7 +43,7 @@ int mxs_iomux_setup_pad(iomux_cfg_t pad) { u32 reg, ofs, bp, bm; void *iomux_base = (void *)MXS_PINCTRL_BASE; - struct mx28_register_32 *mxs_reg; + struct mxs_register_32 *mxs_reg; /* muxsel */ ofs = 0x100; @@ -70,7 +70,7 @@ int mxs_iomux_setup_pad(iomux_cfg_t pad) /* vol */ if (PAD_VOL_VALID(pad)) { bp = PAD_PIN(pad) % 8 * 4 + 2; - mxs_reg = (struct mx28_register_32 *)(iomux_base + ofs); + mxs_reg = (struct mxs_register_32 *)(iomux_base + ofs); if (PAD_VOL(pad)) writel(1 << bp, &mxs_reg->reg_set); else @@ -82,7 +82,7 @@ int mxs_iomux_setup_pad(iomux_cfg_t pad) ofs = PULL_OFFSET; ofs += PAD_BANK(pad) * 0x10; bp = PAD_PIN(pad); - mxs_reg = (struct mx28_register_32 *)(iomux_base + ofs); + mxs_reg = (struct mxs_register_32 *)(iomux_base + ofs); if (PAD_PULL(pad)) writel(1 << bp, &mxs_reg->reg_set); else diff --git a/arch/arm/cpu/arm926ejs/mx28/mx28.c b/arch/arm/cpu/arm926ejs/mxs/mxs.c index ff25772099..6ce8019b83 100644 --- a/arch/arm/cpu/arm926ejs/mx28/mx28.c +++ b/arch/arm/cpu/arm926ejs/mxs/mxs.c @@ -41,8 +41,8 @@ DECLARE_GLOBAL_DATA_PTR; /* 1 second delay should be plenty of time for block reset. */ #define RESET_MAX_TIMEOUT 1000000 -#define MX28_BLOCK_SFTRST (1 << 31) -#define MX28_BLOCK_CLKGATE (1 << 30) +#define MXS_BLOCK_SFTRST (1 << 31) +#define MXS_BLOCK_CLKGATE (1 << 30) /* Lowlevel init isn't used on i.MX28, so just have a dummy here */ inline void lowlevel_init(void) {} @@ -51,10 +51,10 @@ void reset_cpu(ulong ignored) __attribute__((noreturn)); void reset_cpu(ulong ignored) { - struct mx28_rtc_regs *rtc_regs = - (struct mx28_rtc_regs *)MXS_RTC_BASE; - struct mx28_lcdif_regs *lcdif_regs = - (struct mx28_lcdif_regs *)MXS_LCDIF_BASE; + struct mxs_rtc_regs *rtc_regs = + (struct mxs_rtc_regs *)MXS_RTC_BASE; + struct mxs_lcdif_regs *lcdif_regs = + (struct mxs_lcdif_regs *)MXS_LCDIF_BASE; /* * Shut down the LCD controller as it interferes with BootROM boot mode @@ -81,7 +81,8 @@ void enable_caches(void) #endif } -int mx28_wait_mask_set(struct mx28_register_32 *reg, uint32_t mask, int timeout) +int mxs_wait_mask_set(struct mxs_register_32 *reg, uint32_t mask, unsigned + int timeout) { while (--timeout) { if ((readl(®->reg) & mask) == mask) @@ -92,7 +93,8 @@ int mx28_wait_mask_set(struct mx28_register_32 *reg, uint32_t mask, int timeout) return !timeout; } -int mx28_wait_mask_clr(struct mx28_register_32 *reg, uint32_t mask, int timeout) +int mxs_wait_mask_clr(struct mxs_register_32 *reg, uint32_t mask, unsigned + int timeout) { while (--timeout) { if ((readl(®->reg) & mask) == 0) @@ -103,34 +105,34 @@ int mx28_wait_mask_clr(struct mx28_register_32 *reg, uint32_t mask, int timeout) return !timeout; } -int mx28_reset_block(struct mx28_register_32 *reg) +int mxs_reset_block(struct mxs_register_32 *reg) { /* Clear SFTRST */ - writel(MX28_BLOCK_SFTRST, ®->reg_clr); + writel(MXS_BLOCK_SFTRST, ®->reg_clr); - if (mx28_wait_mask_clr(reg, MX28_BLOCK_SFTRST, RESET_MAX_TIMEOUT)) + if (mxs_wait_mask_clr(reg, MXS_BLOCK_SFTRST, RESET_MAX_TIMEOUT)) return 1; /* Clear CLKGATE */ - writel(MX28_BLOCK_CLKGATE, ®->reg_clr); + writel(MXS_BLOCK_CLKGATE, ®->reg_clr); /* Set SFTRST */ - writel(MX28_BLOCK_SFTRST, ®->reg_set); + writel(MXS_BLOCK_SFTRST, ®->reg_set); /* Wait for CLKGATE being set */ - if (mx28_wait_mask_set(reg, MX28_BLOCK_CLKGATE, RESET_MAX_TIMEOUT)) + if (mxs_wait_mask_set(reg, MXS_BLOCK_CLKGATE, RESET_MAX_TIMEOUT)) return 1; /* Clear SFTRST */ - writel(MX28_BLOCK_SFTRST, ®->reg_clr); + writel(MXS_BLOCK_SFTRST, ®->reg_clr); - if (mx28_wait_mask_clr(reg, MX28_BLOCK_SFTRST, RESET_MAX_TIMEOUT)) + if (mxs_wait_mask_clr(reg, MXS_BLOCK_SFTRST, RESET_MAX_TIMEOUT)) return 1; /* Clear CLKGATE */ - writel(MX28_BLOCK_CLKGATE, ®->reg_clr); + writel(MXS_BLOCK_CLKGATE, ®->reg_clr); - if (mx28_wait_mask_clr(reg, MX28_BLOCK_CLKGATE, RESET_MAX_TIMEOUT)) + if (mxs_wait_mask_clr(reg, MXS_BLOCK_CLKGATE, RESET_MAX_TIMEOUT)) return 1; return 0; @@ -155,8 +157,8 @@ int arch_misc_init(void) int arch_cpu_init(void) { - struct mx28_clkctrl_regs *clkctrl_regs = - (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE; + struct mxs_clkctrl_regs *clkctrl_regs = + (struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE; extern uint32_t _start; mx28_fixup_vt((uint32_t)&_start); @@ -188,14 +190,48 @@ int arch_cpu_init(void) } #if defined(CONFIG_DISPLAY_CPUINFO) -int print_cpuinfo(void) +static const char *get_cpu_type(void) { - struct mx28_spl_data *data = (struct mx28_spl_data *) - ((CONFIG_SYS_TEXT_BASE - sizeof(struct mx28_spl_data)) & ~0xf); + struct mxs_digctl_regs *digctl_regs = + (struct mxs_digctl_regs *)MXS_DIGCTL_BASE; + + switch (readl(&digctl_regs->hw_digctl_chipid) & HW_DIGCTL_CHIPID_MASK) { + case HW_DIGCTL_CHIPID_MX28: + return "28"; + default: + return "??"; + } +} - printf("Freescale i.MX28 family at %d MHz\n", - mxc_get_clock(MXC_ARM_CLK) / 1000000); - printf("BOOT: %s\n", mx28_boot_modes[data->boot_mode_idx].mode); +static const char *get_cpu_rev(void) +{ + struct mxs_digctl_regs *digctl_regs = + (struct mxs_digctl_regs *)MXS_DIGCTL_BASE; + uint8_t rev = readl(&digctl_regs->hw_digctl_chipid) & 0x000000FF; + + switch (readl(&digctl_regs->hw_digctl_chipid) & HW_DIGCTL_CHIPID_MASK) { + case HW_DIGCTL_CHIPID_MX28: + switch (rev) { + case 0x1: + return "1.2"; + default: + return "??"; + } + default: + return "??"; + } +} + +int print_cpuinfo(void) +{ + struct mxs_spl_data *data = (struct mxs_spl_data *) + ((CONFIG_SYS_TEXT_BASE - sizeof(struct mxs_spl_data)) & ~0xf); + + printf("CPU: Freescale i.MX%s rev%s at %d MHz\n", + get_cpu_type(), + get_cpu_rev(), + mxc_get_clock(MXC_ARM_CLK) / 1000000); + printf("BOOT: %s\n", mxs_boot_modes[data->boot_mode_idx].mode); return 0; } #endif @@ -212,11 +248,11 @@ int do_mx28_showclocks(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) /* * Initializes on-chip ethernet controllers. */ -#ifdef CONFIG_CMD_NET +#if defined(CONFIG_MX28) && defined(CONFIG_CMD_NET) int cpu_eth_init(bd_t *bis) { - struct mx28_clkctrl_regs *clkctrl_regs = - (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE; + struct mxs_clkctrl_regs *clkctrl_regs = + (struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE; /* Turn on ENET clocks */ clrbits_le32(&clkctrl_regs->hw_clkctrl_enet, @@ -257,15 +293,15 @@ void mx28_adjust_mac(int dev_id, unsigned char *mac) #define MXS_OCOTP_MAX_TIMEOUT 1000000 void imx_get_mac_from_fuse(int dev_id, unsigned char *mac) { - struct mx28_ocotp_regs *ocotp_regs = - (struct mx28_ocotp_regs *)MXS_OCOTP_BASE; + struct mxs_ocotp_regs *ocotp_regs = + (struct mxs_ocotp_regs *)MXS_OCOTP_BASE; uint32_t data; memset(mac, 0, 6); writel(OCOTP_CTRL_RD_BANK_OPEN, &ocotp_regs->hw_ocotp_ctrl_set); - if (mx28_wait_mask_clr(&ocotp_regs->hw_ocotp_ctrl_reg, OCOTP_CTRL_BUSY, + if (mxs_wait_mask_clr(&ocotp_regs->hw_ocotp_ctrl_reg, OCOTP_CTRL_BUSY, MXS_OCOTP_MAX_TIMEOUT)) { printf("MXS FEC: Can't get MAC from OCOTP\n"); return; @@ -286,13 +322,13 @@ void imx_get_mac_from_fuse(int dev_id, unsigned char *mac) } #endif -int mx28_dram_init(void) +int mxs_dram_init(void) { - struct mx28_spl_data *data = (struct mx28_spl_data *) - ((CONFIG_SYS_TEXT_BASE - sizeof(struct mx28_spl_data)) & ~0xf); + struct mxs_spl_data *data = (struct mxs_spl_data *) + ((CONFIG_SYS_TEXT_BASE - sizeof(struct mxs_spl_data)) & ~0xf); if (data->mem_dram_size == 0) { - printf("MX28:\n" + printf("MXS:\n" "Error, the RAM size passed up from SPL is 0!\n"); hang(); } diff --git a/arch/arm/cpu/arm926ejs/mx28/mx28_init.h b/arch/arm/cpu/arm926ejs/mxs/mxs_init.h index e3a4493fbd..2ddc5bc0c6 100644 --- a/arch/arm/cpu/arm926ejs/mx28/mx28_init.h +++ b/arch/arm/cpu/arm926ejs/mxs/mxs_init.h @@ -28,18 +28,18 @@ void early_delay(int delay); -void mx28_power_init(void); +void mxs_power_init(void); #ifdef CONFIG_SPL_MX28_PSWITCH_WAIT -void mx28_power_wait_pswitch(void); +void mxs_power_wait_pswitch(void); #else -static inline void mx28_power_wait_pswitch(void) { } +static inline void mxs_power_wait_pswitch(void) { } #endif -void mx28_mem_init(void); -uint32_t mx28_mem_get_size(void); +void mxs_mem_init(void); +uint32_t mxs_mem_get_size(void); -void mx28_lradc_init(void); -void mx28_lradc_enable_batt_measurement(void); +void mxs_lradc_init(void); +void mxs_lradc_enable_batt_measurement(void); #endif /* __M28_INIT_H__ */ diff --git a/arch/arm/cpu/arm926ejs/mx28/spl_boot.c b/arch/arm/cpu/arm926ejs/mxs/spl_boot.c index a6dfca3f51..ddafddbf2b 100644 --- a/arch/arm/cpu/arm926ejs/mx28/spl_boot.c +++ b/arch/arm/cpu/arm926ejs/mxs/spl_boot.c @@ -26,12 +26,11 @@ #include <common.h> #include <config.h> #include <asm/io.h> -#include <asm/arch/iomux-mx28.h> #include <asm/arch/imx-regs.h> #include <asm/arch/sys_proto.h> #include <asm/gpio.h> -#include "mx28_init.h" +#include "mxs_init.h" /* * This delay function is intended to be used only in early stage of boot, where @@ -58,7 +57,7 @@ const iomux_cfg_t iomux_boot[] = { MX28_PAD_LCD_D05__GPIO_1_5 | MUX_CONFIG_BOOTMODE_PAD, }; -uint8_t mx28_get_bootmode_index(void) +uint8_t mxs_get_bootmode_index(void) { uint8_t bootmode = 0; int i; @@ -83,31 +82,31 @@ uint8_t mx28_get_bootmode_index(void) bootmode |= (gpio_get_value(MX28_PAD_LCD_D04__GPIO_1_4) ? 1 : 0) << 4; bootmode |= (gpio_get_value(MX28_PAD_LCD_D05__GPIO_1_5) ? 1 : 0) << 5; - for (i = 0; i < ARRAY_SIZE(mx28_boot_modes); i++) { - masked = bootmode & mx28_boot_modes[i].boot_mask; - if (masked == mx28_boot_modes[i].boot_pads) + for (i = 0; i < ARRAY_SIZE(mxs_boot_modes); i++) { + masked = bootmode & mxs_boot_modes[i].boot_mask; + if (masked == mxs_boot_modes[i].boot_pads) break; } return i; } -void mx28_common_spl_init(const iomux_cfg_t *iomux_setup, +void mxs_common_spl_init(const iomux_cfg_t *iomux_setup, const unsigned int iomux_size) { - struct mx28_spl_data *data = (struct mx28_spl_data *) - ((CONFIG_SYS_TEXT_BASE - sizeof(struct mx28_spl_data)) & ~0xf); - uint8_t bootmode = mx28_get_bootmode_index(); + struct mxs_spl_data *data = (struct mxs_spl_data *) + ((CONFIG_SYS_TEXT_BASE - sizeof(struct mxs_spl_data)) & ~0xf); + uint8_t bootmode = mxs_get_bootmode_index(); mxs_iomux_setup_multiple_pads(iomux_setup, iomux_size); - mx28_power_init(); + mxs_power_init(); - mx28_mem_init(); - data->mem_dram_size = mx28_mem_get_size(); + mxs_mem_init(); + data->mem_dram_size = mxs_mem_get_size(); data->boot_mode_idx = bootmode; - mx28_power_wait_pswitch(); + mxs_power_wait_pswitch(); } /* Support aparatus */ diff --git a/arch/arm/cpu/arm926ejs/mx28/spl_lradc_init.c b/arch/arm/cpu/arm926ejs/mxs/spl_lradc_init.c index 88a603c11d..d90f0a1310 100644 --- a/arch/arm/cpu/arm926ejs/mx28/spl_lradc_init.c +++ b/arch/arm/cpu/arm926ejs/mxs/spl_lradc_init.c @@ -28,11 +28,11 @@ #include <asm/io.h> #include <asm/arch/imx-regs.h> -#include "mx28_init.h" +#include "mxs_init.h" -void mx28_lradc_init(void) +void mxs_lradc_init(void) { - struct mx28_lradc_regs *regs = (struct mx28_lradc_regs *)MXS_LRADC_BASE; + struct mxs_lradc_regs *regs = (struct mxs_lradc_regs *)MXS_LRADC_BASE; writel(LRADC_CTRL0_SFTRST, ®s->hw_lradc_ctrl0_clr); writel(LRADC_CTRL0_CLKGATE, ®s->hw_lradc_ctrl0_clr); @@ -49,9 +49,9 @@ void mx28_lradc_init(void) LRADC_CTRL4_LRADC6SELECT_CHANNEL10); } -void mx28_lradc_enable_batt_measurement(void) +void mxs_lradc_enable_batt_measurement(void) { - struct mx28_lradc_regs *regs = (struct mx28_lradc_regs *)MXS_LRADC_BASE; + struct mxs_lradc_regs *regs = (struct mxs_lradc_regs *)MXS_LRADC_BASE; /* Check if the channel is present at all. */ if (!(readl(®s->hw_lradc_status) & LRADC_STATUS_CHANNEL7_PRESENT)) diff --git a/arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c b/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c index e17a4d7c7f..e693145b90 100644 --- a/arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c +++ b/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c @@ -26,12 +26,11 @@ #include <common.h> #include <config.h> #include <asm/io.h> -#include <asm/arch/iomux-mx28.h> #include <asm/arch/imx-regs.h> -#include "mx28_init.h" +#include "mxs_init.h" -uint32_t dram_vals[] = { +static uint32_t mx28_dram_vals[] = { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, @@ -82,26 +81,26 @@ uint32_t dram_vals[] = { 0x00000000, 0x00010001 }; -void __mx28_adjust_memory_params(uint32_t *dram_vals) +void __mxs_adjust_memory_params(uint32_t *dram_vals) { } -void mx28_adjust_memory_params(uint32_t *dram_vals) - __attribute__((weak, alias("__mx28_adjust_memory_params"))); +void mxs_adjust_memory_params(uint32_t *dram_vals) + __attribute__((weak, alias("__mxs_adjust_memory_params"))); -void init_m28_200mhz_ddr2(void) +void init_mx28_200mhz_ddr2(void) { int i; - mx28_adjust_memory_params(dram_vals); + mxs_adjust_memory_params(mx28_dram_vals); - for (i = 0; i < ARRAY_SIZE(dram_vals); i++) - writel(dram_vals[i], MXS_DRAM_BASE + (4 * i)); + for (i = 0; i < ARRAY_SIZE(mx28_dram_vals); i++) + writel(mx28_dram_vals[i], MXS_DRAM_BASE + (4 * i)); } -void mx28_mem_init_clock(void) +void mxs_mem_init_clock(void) { - struct mx28_clkctrl_regs *clkctrl_regs = - (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE; + struct mxs_clkctrl_regs *clkctrl_regs = + (struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE; /* Gate EMI clock */ writeb(CLKCTRL_FRAC_CLKGATE, @@ -129,10 +128,10 @@ void mx28_mem_init_clock(void) early_delay(10000); } -void mx28_mem_setup_cpu_and_hbus(void) +void mxs_mem_setup_cpu_and_hbus(void) { - struct mx28_clkctrl_regs *clkctrl_regs = - (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE; + struct mxs_clkctrl_regs *clkctrl_regs = + (struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE; /* Set fractional divider for ref_cpu to 480 * 18 / 19 = 454MHz * and ungate CPU clock */ @@ -161,10 +160,10 @@ void mx28_mem_setup_cpu_and_hbus(void) early_delay(15000); } -void mx28_mem_setup_vdda(void) +void mxs_mem_setup_vdda(void) { - struct mx28_power_regs *power_regs = - (struct mx28_power_regs *)MXS_POWER_BASE; + struct mxs_power_regs *power_regs = + (struct mxs_power_regs *)MXS_POWER_BASE; writel((0xc << POWER_VDDACTRL_TRG_OFFSET) | (0x7 << POWER_VDDACTRL_BO_OFFSET_OFFSET) | @@ -172,10 +171,10 @@ void mx28_mem_setup_vdda(void) &power_regs->hw_power_vddactrl); } -void mx28_mem_setup_vddd(void) +void mxs_mem_setup_vddd(void) { - struct mx28_power_regs *power_regs = - (struct mx28_power_regs *)MXS_POWER_BASE; + struct mxs_power_regs *power_regs = + (struct mxs_power_regs *)MXS_POWER_BASE; writel((0x1c << POWER_VDDDCTRL_TRG_OFFSET) | (0x7 << POWER_VDDDCTRL_BO_OFFSET_OFFSET) | @@ -183,7 +182,7 @@ void mx28_mem_setup_vddd(void) &power_regs->hw_power_vdddctrl); } -uint32_t mx28_mem_get_size(void) +uint32_t mxs_mem_get_size(void) { uint32_t sz, da; uint32_t *vt = (uint32_t *)0x20; @@ -202,12 +201,12 @@ uint32_t mx28_mem_get_size(void) return sz; } -void mx28_mem_init(void) +void mxs_mem_init(void) { - struct mx28_clkctrl_regs *clkctrl_regs = - (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE; - struct mx28_pinctrl_regs *pinctrl_regs = - (struct mx28_pinctrl_regs *)MXS_PINCTRL_BASE; + struct mxs_clkctrl_regs *clkctrl_regs = + (struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE; + struct mxs_pinctrl_regs *pinctrl_regs = + (struct mxs_pinctrl_regs *)MXS_PINCTRL_BASE; /* Set DDR2 mode */ writel(PINCTRL_EMI_DS_CTRL_DDR_MODE_DDR2, @@ -219,9 +218,9 @@ void mx28_mem_init(void) early_delay(11000); - mx28_mem_init_clock(); + mxs_mem_init_clock(); - mx28_mem_setup_vdda(); + mxs_mem_setup_vdda(); /* * Configure the DRAM registers @@ -230,7 +229,7 @@ void mx28_mem_init(void) /* Clear START bit from DRAM_CTL16 */ clrbits_le32(MXS_DRAM_BASE + 0x40, 1); - init_m28_200mhz_ddr2(); + init_mx28_200mhz_ddr2(); /* Clear SREFRESH bit from DRAM_CTL17 */ clrbits_le32(MXS_DRAM_BASE + 0x44, 1); @@ -242,9 +241,9 @@ void mx28_mem_init(void) while (!(readl(MXS_DRAM_BASE + 0xe8) & (1 << 20))) ; - mx28_mem_setup_vddd(); + mxs_mem_setup_vddd(); early_delay(10000); - mx28_mem_setup_cpu_and_hbus(); + mxs_mem_setup_cpu_and_hbus(); } diff --git a/arch/arm/cpu/arm926ejs/mx28/spl_power_init.c b/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c index 4b09b0c3ba..4b917bd186 100644 --- a/arch/arm/cpu/arm926ejs/mx28/spl_power_init.c +++ b/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c @@ -28,22 +28,22 @@ #include <asm/io.h> #include <asm/arch/imx-regs.h> -#include "mx28_init.h" +#include "mxs_init.h" -void mx28_power_clock2xtal(void) +void mxs_power_clock2xtal(void) { - struct mx28_clkctrl_regs *clkctrl_regs = - (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE; + struct mxs_clkctrl_regs *clkctrl_regs = + (struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE; /* Set XTAL as CPU reference clock */ writel(CLKCTRL_CLKSEQ_BYPASS_CPU, &clkctrl_regs->hw_clkctrl_clkseq_set); } -void mx28_power_clock2pll(void) +void mxs_power_clock2pll(void) { - struct mx28_clkctrl_regs *clkctrl_regs = - (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE; + struct mxs_clkctrl_regs *clkctrl_regs = + (struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE; setbits_le32(&clkctrl_regs->hw_clkctrl_pll0ctrl0, CLKCTRL_PLL0CTRL0_POWER); @@ -52,10 +52,10 @@ void mx28_power_clock2pll(void) CLKCTRL_CLKSEQ_BYPASS_CPU); } -void mx28_power_clear_auto_restart(void) +void mxs_power_clear_auto_restart(void) { - struct mx28_rtc_regs *rtc_regs = - (struct mx28_rtc_regs *)MXS_RTC_BASE; + struct mxs_rtc_regs *rtc_regs = + (struct mxs_rtc_regs *)MXS_RTC_BASE; writel(RTC_CTRL_SFTRST, &rtc_regs->hw_rtc_ctrl_clr); while (readl(&rtc_regs->hw_rtc_ctrl) & RTC_CTRL_SFTRST) @@ -85,10 +85,10 @@ void mx28_power_clear_auto_restart(void) ; } -void mx28_power_set_linreg(void) +void mxs_power_set_linreg(void) { - struct mx28_power_regs *power_regs = - (struct mx28_power_regs *)MXS_POWER_BASE; + struct mxs_power_regs *power_regs = + (struct mxs_power_regs *)MXS_POWER_BASE; /* Set linear regulator 25mV below switching converter */ clrsetbits_le32(&power_regs->hw_power_vdddctrl, @@ -104,10 +104,10 @@ void mx28_power_set_linreg(void) POWER_VDDIOCTRL_LINREG_OFFSET_1STEPS_BELOW); } -int mx28_get_batt_volt(void) +int mxs_get_batt_volt(void) { - struct mx28_power_regs *power_regs = - (struct mx28_power_regs *)MXS_POWER_BASE; + struct mxs_power_regs *power_regs = + (struct mxs_power_regs *)MXS_POWER_BASE; uint32_t volt = readl(&power_regs->hw_power_battmonitor); volt &= POWER_BATTMONITOR_BATT_VAL_MASK; volt >>= POWER_BATTMONITOR_BATT_VAL_OFFSET; @@ -115,16 +115,16 @@ int mx28_get_batt_volt(void) return volt; } -int mx28_is_batt_ready(void) +int mxs_is_batt_ready(void) { - return (mx28_get_batt_volt() >= 3600); + return (mxs_get_batt_volt() >= 3600); } -int mx28_is_batt_good(void) +int mxs_is_batt_good(void) { - struct mx28_power_regs *power_regs = - (struct mx28_power_regs *)MXS_POWER_BASE; - uint32_t volt = mx28_get_batt_volt(); + struct mxs_power_regs *power_regs = + (struct mxs_power_regs *)MXS_POWER_BASE; + uint32_t volt = mxs_get_batt_volt(); if ((volt >= 2400) && (volt <= 4300)) return 1; @@ -145,7 +145,7 @@ int mx28_is_batt_good(void) early_delay(500000); - volt = mx28_get_batt_volt(); + volt = mxs_get_batt_volt(); if (volt >= 3500) return 0; @@ -160,10 +160,10 @@ int mx28_is_batt_good(void) return 0; } -void mx28_power_setup_5v_detect(void) +void mxs_power_setup_5v_detect(void) { - struct mx28_power_regs *power_regs = - (struct mx28_power_regs *)MXS_POWER_BASE; + struct mxs_power_regs *power_regs = + (struct mxs_power_regs *)MXS_POWER_BASE; /* Start 5V detection */ clrsetbits_le32(&power_regs->hw_power_5vctrl, @@ -172,10 +172,10 @@ void mx28_power_setup_5v_detect(void) POWER_5VCTRL_PWRUP_VBUS_CMPS); } -void mx28_src_power_init(void) +void mxs_src_power_init(void) { - struct mx28_power_regs *power_regs = - (struct mx28_power_regs *)MXS_POWER_BASE; + struct mxs_power_regs *power_regs = + (struct mxs_power_regs *)MXS_POWER_BASE; /* Improve efficieny and reduce transient ripple */ writel(POWER_LOOPCTRL_TOGGLE_DIF | POWER_LOOPCTRL_EN_CM_HYST | @@ -203,10 +203,10 @@ void mx28_src_power_init(void) clrbits_le32(&power_regs->hw_power_5vctrl, POWER_5VCTRL_DCDC_XFER); } -void mx28_power_init_4p2_params(void) +void mxs_power_init_4p2_params(void) { - struct mx28_power_regs *power_regs = - (struct mx28_power_regs *)MXS_POWER_BASE; + struct mxs_power_regs *power_regs = + (struct mxs_power_regs *)MXS_POWER_BASE; /* Setup 4P2 parameters */ clrsetbits_le32(&power_regs->hw_power_dcdc4p2, @@ -227,10 +227,10 @@ void mx28_power_init_4p2_params(void) 0x3f << POWER_5VCTRL_CHARGE_4P2_ILIMIT_OFFSET); } -void mx28_enable_4p2_dcdc_input(int xfer) +void mxs_enable_4p2_dcdc_input(int xfer) { - struct mx28_power_regs *power_regs = - (struct mx28_power_regs *)MXS_POWER_BASE; + struct mxs_power_regs *power_regs = + (struct mxs_power_regs *)MXS_POWER_BASE; uint32_t tmp, vbus_thresh, vbus_5vdetect, pwd_bo; uint32_t prev_5v_brnout, prev_5v_droop; @@ -323,10 +323,10 @@ void mx28_enable_4p2_dcdc_input(int xfer) POWER_CTRL_ENIRQ_VDD5V_DROOP); } -void mx28_power_init_4p2_regulator(void) +void mxs_power_init_4p2_regulator(void) { - struct mx28_power_regs *power_regs = - (struct mx28_power_regs *)MXS_POWER_BASE; + struct mxs_power_regs *power_regs = + (struct mxs_power_regs *)MXS_POWER_BASE; uint32_t tmp, tmp2; setbits_le32(&power_regs->hw_power_dcdc4p2, POWER_DCDC4P2_ENABLE_4P2); @@ -346,7 +346,7 @@ void mx28_power_init_4p2_regulator(void) * gradually to avoid large inrush current from the 5V cable which can * cause transients/problems */ - mx28_enable_4p2_dcdc_input(0); + mxs_enable_4p2_dcdc_input(0); if (readl(&power_regs->hw_power_ctrl) & POWER_CTRL_VBUS_VALID_IRQ) { /* @@ -407,17 +407,17 @@ void mx28_power_init_4p2_regulator(void) writel(POWER_CTRL_DCDC4P2_BO_IRQ, &power_regs->hw_power_ctrl_clr); } -void mx28_power_init_dcdc_4p2_source(void) +void mxs_power_init_dcdc_4p2_source(void) { - struct mx28_power_regs *power_regs = - (struct mx28_power_regs *)MXS_POWER_BASE; + struct mxs_power_regs *power_regs = + (struct mxs_power_regs *)MXS_POWER_BASE; if (!(readl(&power_regs->hw_power_dcdc4p2) & POWER_DCDC4P2_ENABLE_DCDC)) { hang(); } - mx28_enable_4p2_dcdc_input(1); + mxs_enable_4p2_dcdc_input(1); if (readl(&power_regs->hw_power_ctrl) & POWER_CTRL_VBUS_VALID_IRQ) { clrbits_le32(&power_regs->hw_power_dcdc4p2, @@ -429,10 +429,10 @@ void mx28_power_init_dcdc_4p2_source(void) } } -void mx28_power_enable_4p2(void) +void mxs_power_enable_4p2(void) { - struct mx28_power_regs *power_regs = - (struct mx28_power_regs *)MXS_POWER_BASE; + struct mxs_power_regs *power_regs = + (struct mxs_power_regs *)MXS_POWER_BASE; uint32_t vdddctrl, vddactrl, vddioctrl; uint32_t tmp; @@ -451,11 +451,11 @@ void mx28_power_enable_4p2(void) setbits_le32(&power_regs->hw_power_vddioctrl, POWER_VDDIOCTRL_DISABLE_FET | POWER_VDDIOCTRL_PWDN_BRNOUT); - mx28_power_init_4p2_params(); - mx28_power_init_4p2_regulator(); + mxs_power_init_4p2_params(); + mxs_power_init_4p2_regulator(); /* Shutdown battery (none present) */ - if (!mx28_is_batt_ready()) { + if (!mxs_is_batt_ready()) { clrbits_le32(&power_regs->hw_power_dcdc4p2, POWER_DCDC4P2_BO_MASK); writel(POWER_CTRL_DCDC4P2_BO_IRQ, @@ -464,7 +464,7 @@ void mx28_power_enable_4p2(void) &power_regs->hw_power_ctrl_clr); } - mx28_power_init_dcdc_4p2_source(); + mxs_power_init_dcdc_4p2_source(); writel(vdddctrl, &power_regs->hw_power_vdddctrl); early_delay(20); @@ -488,10 +488,10 @@ void mx28_power_enable_4p2(void) &power_regs->hw_power_charge_clr); } -void mx28_boot_valid_5v(void) +void mxs_boot_valid_5v(void) { - struct mx28_power_regs *power_regs = - (struct mx28_power_regs *)MXS_POWER_BASE; + struct mxs_power_regs *power_regs = + (struct mxs_power_regs *)MXS_POWER_BASE; /* * Use VBUSVALID level instead of VDD5V_GT_VDDIO level to trigger a 5V @@ -508,22 +508,22 @@ void mx28_boot_valid_5v(void) writel(POWER_CTRL_VBUS_VALID_IRQ | POWER_CTRL_VDD5V_GT_VDDIO_IRQ, &power_regs->hw_power_ctrl_clr); - mx28_power_enable_4p2(); + mxs_power_enable_4p2(); } -void mx28_powerdown(void) +void mxs_powerdown(void) { - struct mx28_power_regs *power_regs = - (struct mx28_power_regs *)MXS_POWER_BASE; + struct mxs_power_regs *power_regs = + (struct mxs_power_regs *)MXS_POWER_BASE; writel(POWER_RESET_UNLOCK_KEY, &power_regs->hw_power_reset); writel(POWER_RESET_UNLOCK_KEY | POWER_RESET_PWD_OFF, &power_regs->hw_power_reset); } -void mx28_batt_boot(void) +void mxs_batt_boot(void) { - struct mx28_power_regs *power_regs = - (struct mx28_power_regs *)MXS_POWER_BASE; + struct mxs_power_regs *power_regs = + (struct mxs_power_regs *)MXS_POWER_BASE; clrbits_le32(&power_regs->hw_power_5vctrl, POWER_5VCTRL_PWDN_5VBRNOUT); clrbits_le32(&power_regs->hw_power_5vctrl, POWER_5VCTRL_ENABLE_DCDC); @@ -542,7 +542,7 @@ void mx28_batt_boot(void) clrsetbits_le32(&power_regs->hw_power_minpwr, POWER_MINPWR_HALFFETS, POWER_MINPWR_DOUBLE_FETS); - mx28_power_set_linreg(); + mxs_power_set_linreg(); clrbits_le32(&power_regs->hw_power_vdddctrl, POWER_VDDDCTRL_DISABLE_FET | POWER_VDDDCTRL_ENABLE_LINREG); @@ -564,10 +564,10 @@ void mx28_batt_boot(void) 0x8 << POWER_5VCTRL_CHARGE_4P2_ILIMIT_OFFSET); } -void mx28_handle_5v_conflict(void) +void mxs_handle_5v_conflict(void) { - struct mx28_power_regs *power_regs = - (struct mx28_power_regs *)MXS_POWER_BASE; + struct mxs_power_regs *power_regs = + (struct mxs_power_regs *)MXS_POWER_BASE; uint32_t tmp; setbits_le32(&power_regs->hw_power_vddioctrl, @@ -577,52 +577,56 @@ void mx28_handle_5v_conflict(void) tmp = readl(&power_regs->hw_power_sts); if (tmp & POWER_STS_VDDIO_BO) { - mx28_powerdown(); + /* + * VDDIO has a brownout, then the VDD5V_GT_VDDIO becomes + * unreliable + */ + mxs_powerdown(); break; } if (tmp & POWER_STS_VDD5V_GT_VDDIO) { - mx28_boot_valid_5v(); + mxs_boot_valid_5v(); break; } else { - mx28_powerdown(); + mxs_powerdown(); break; } if (tmp & POWER_STS_PSWITCH_MASK) { - mx28_batt_boot(); + mxs_batt_boot(); break; } } } -void mx28_5v_boot(void) +void mxs_5v_boot(void) { - struct mx28_power_regs *power_regs = - (struct mx28_power_regs *)MXS_POWER_BASE; + struct mxs_power_regs *power_regs = + (struct mxs_power_regs *)MXS_POWER_BASE; /* * NOTE: In original IMX-Bootlets, this also checks for VBUSVALID, * but their implementation always returns 1 so we omit it here. */ if (readl(&power_regs->hw_power_sts) & POWER_STS_VDD5V_GT_VDDIO) { - mx28_boot_valid_5v(); + mxs_boot_valid_5v(); return; } early_delay(1000); if (readl(&power_regs->hw_power_sts) & POWER_STS_VDD5V_GT_VDDIO) { - mx28_boot_valid_5v(); + mxs_boot_valid_5v(); return; } - mx28_handle_5v_conflict(); + mxs_handle_5v_conflict(); } -void mx28_init_batt_bo(void) +void mxs_init_batt_bo(void) { - struct mx28_power_regs *power_regs = - (struct mx28_power_regs *)MXS_POWER_BASE; + struct mxs_power_regs *power_regs = + (struct mxs_power_regs *)MXS_POWER_BASE; /* Brownout at 3V */ clrsetbits_le32(&power_regs->hw_power_battmonitor, @@ -633,10 +637,10 @@ void mx28_init_batt_bo(void) writel(POWER_CTRL_ENIRQ_BATT_BO, &power_regs->hw_power_ctrl_clr); } -void mx28_switch_vddd_to_dcdc_source(void) +void mxs_switch_vddd_to_dcdc_source(void) { - struct mx28_power_regs *power_regs = - (struct mx28_power_regs *)MXS_POWER_BASE; + struct mxs_power_regs *power_regs = + (struct mxs_power_regs *)MXS_POWER_BASE; clrsetbits_le32(&power_regs->hw_power_vdddctrl, POWER_VDDDCTRL_LINREG_OFFSET_MASK, @@ -647,51 +651,48 @@ void mx28_switch_vddd_to_dcdc_source(void) POWER_VDDDCTRL_DISABLE_STEPPING); } -void mx28_power_configure_power_source(void) +void mxs_power_configure_power_source(void) { int batt_ready, batt_good; - struct mx28_power_regs *power_regs = - (struct mx28_power_regs *)MXS_POWER_BASE; - struct mx28_lradc_regs *lradc_regs = - (struct mx28_lradc_regs *)MXS_LRADC_BASE; + struct mxs_power_regs *power_regs = + (struct mxs_power_regs *)MXS_POWER_BASE; + struct mxs_lradc_regs *lradc_regs = + (struct mxs_lradc_regs *)MXS_LRADC_BASE; - mx28_src_power_init(); - - batt_ready = mx28_is_batt_ready(); + mxs_src_power_init(); if (readl(&power_regs->hw_power_sts) & POWER_STS_VDD5V_GT_VDDIO) { - batt_good = mx28_is_batt_good(); + batt_ready = mxs_is_batt_ready(); if (batt_ready) { /* 5V source detected, good battery detected. */ - mx28_batt_boot(); + mxs_batt_boot(); } else { - if (batt_good) { - /* 5V source detected, low battery detceted. */ - } else { + batt_good = mxs_is_batt_good(); + if (!batt_good) { /* 5V source detected, bad battery detected. */ writel(LRADC_CONVERSION_AUTOMATIC, &lradc_regs->hw_lradc_conversion_clr); clrbits_le32(&power_regs->hw_power_battmonitor, POWER_BATTMONITOR_BATT_VAL_MASK); } - mx28_5v_boot(); + mxs_5v_boot(); } } else { /* 5V not detected, booting from battery. */ - mx28_batt_boot(); + mxs_batt_boot(); } - mx28_power_clock2pll(); + mxs_power_clock2pll(); - mx28_init_batt_bo(); + mxs_init_batt_bo(); - mx28_switch_vddd_to_dcdc_source(); + mxs_switch_vddd_to_dcdc_source(); } -void mx28_enable_output_rail_protection(void) +void mxs_enable_output_rail_protection(void) { - struct mx28_power_regs *power_regs = - (struct mx28_power_regs *)MXS_POWER_BASE; + struct mxs_power_regs *power_regs = + (struct mxs_power_regs *)MXS_POWER_BASE; writel(POWER_CTRL_VDDD_BO_IRQ | POWER_CTRL_VDDA_BO_IRQ | POWER_CTRL_VDDIO_BO_IRQ, &power_regs->hw_power_ctrl_clr); @@ -706,17 +707,17 @@ void mx28_enable_output_rail_protection(void) POWER_VDDIOCTRL_PWDN_BRNOUT); } -int mx28_get_vddio_power_source_off(void) +int mxs_get_vddio_power_source_off(void) { - struct mx28_power_regs *power_regs = - (struct mx28_power_regs *)MXS_POWER_BASE; + struct mxs_power_regs *power_regs = + (struct mxs_power_regs *)MXS_POWER_BASE; uint32_t tmp; if (readl(&power_regs->hw_power_sts) & POWER_STS_VDD5V_GT_VDDIO) { tmp = readl(&power_regs->hw_power_vddioctrl); if (tmp & POWER_VDDIOCTRL_DISABLE_FET) { if ((tmp & POWER_VDDIOCTRL_LINREG_OFFSET_MASK) == - POWER_VDDDCTRL_LINREG_OFFSET_0STEPS) { + POWER_VDDIOCTRL_LINREG_OFFSET_0STEPS) { return 1; } } @@ -724,7 +725,7 @@ int mx28_get_vddio_power_source_off(void) if (!(readl(&power_regs->hw_power_5vctrl) & POWER_5VCTRL_ENABLE_DCDC)) { if ((tmp & POWER_VDDIOCTRL_LINREG_OFFSET_MASK) == - POWER_VDDDCTRL_LINREG_OFFSET_0STEPS) { + POWER_VDDIOCTRL_LINREG_OFFSET_0STEPS) { return 1; } } @@ -734,10 +735,10 @@ int mx28_get_vddio_power_source_off(void) } -int mx28_get_vddd_power_source_off(void) +int mxs_get_vddd_power_source_off(void) { - struct mx28_power_regs *power_regs = - (struct mx28_power_regs *)MXS_POWER_BASE; + struct mxs_power_regs *power_regs = + (struct mxs_power_regs *)MXS_POWER_BASE; uint32_t tmp; tmp = readl(&power_regs->hw_power_vdddctrl); @@ -765,21 +766,21 @@ int mx28_get_vddd_power_source_off(void) return 0; } -void mx28_power_set_vddio(uint32_t new_target, uint32_t new_brownout) +void mxs_power_set_vddio(uint32_t new_target, uint32_t new_brownout) { - struct mx28_power_regs *power_regs = - (struct mx28_power_regs *)MXS_POWER_BASE; + struct mxs_power_regs *power_regs = + (struct mxs_power_regs *)MXS_POWER_BASE; uint32_t cur_target, diff, bo_int = 0; uint32_t powered_by_linreg = 0; - new_brownout = new_target - new_brownout; + new_brownout = (new_target - new_brownout + 25) / 50; cur_target = readl(&power_regs->hw_power_vddioctrl); cur_target &= POWER_VDDIOCTRL_TRG_MASK; cur_target *= 50; /* 50 mV step*/ cur_target += 2800; /* 2800 mV lowest */ - powered_by_linreg = mx28_get_vddio_power_source_off(); + powered_by_linreg = mxs_get_vddio_power_source_off(); if (new_target > cur_target) { if (powered_by_linreg) { @@ -858,25 +859,25 @@ void mx28_power_set_vddio(uint32_t new_target, uint32_t new_brownout) } clrsetbits_le32(&power_regs->hw_power_vddioctrl, - POWER_VDDDCTRL_BO_OFFSET_MASK, - new_brownout << POWER_VDDDCTRL_BO_OFFSET_OFFSET); + POWER_VDDIOCTRL_BO_OFFSET_MASK, + new_brownout << POWER_VDDIOCTRL_BO_OFFSET_OFFSET); } -void mx28_power_set_vddd(uint32_t new_target, uint32_t new_brownout) +void mxs_power_set_vddd(uint32_t new_target, uint32_t new_brownout) { - struct mx28_power_regs *power_regs = - (struct mx28_power_regs *)MXS_POWER_BASE; + struct mxs_power_regs *power_regs = + (struct mxs_power_regs *)MXS_POWER_BASE; uint32_t cur_target, diff, bo_int = 0; uint32_t powered_by_linreg = 0; - new_brownout = new_target - new_brownout; + new_brownout = (new_target - new_brownout + 12) / 25; cur_target = readl(&power_regs->hw_power_vdddctrl); cur_target &= POWER_VDDDCTRL_TRG_MASK; cur_target *= 25; /* 25 mV step*/ cur_target += 800; /* 800 mV lowest */ - powered_by_linreg = mx28_get_vddd_power_source_off(); + powered_by_linreg = mxs_get_vddd_power_source_off(); if (new_target > cur_target) { if (powered_by_linreg) { bo_int = readl(&power_regs->hw_power_vdddctrl); @@ -959,31 +960,31 @@ void mx28_power_set_vddd(uint32_t new_target, uint32_t new_brownout) new_brownout << POWER_VDDDCTRL_BO_OFFSET_OFFSET); } -void mx28_setup_batt_detect(void) +void mxs_setup_batt_detect(void) { - mx28_lradc_init(); - mx28_lradc_enable_batt_measurement(); + mxs_lradc_init(); + mxs_lradc_enable_batt_measurement(); early_delay(10); } -void mx28_power_init(void) +void mxs_power_init(void) { - struct mx28_power_regs *power_regs = - (struct mx28_power_regs *)MXS_POWER_BASE; + struct mxs_power_regs *power_regs = + (struct mxs_power_regs *)MXS_POWER_BASE; - mx28_power_clock2xtal(); - mx28_power_clear_auto_restart(); - mx28_power_set_linreg(); - mx28_power_setup_5v_detect(); + mxs_power_clock2xtal(); + mxs_power_clear_auto_restart(); + mxs_power_set_linreg(); + mxs_power_setup_5v_detect(); - mx28_setup_batt_detect(); + mxs_setup_batt_detect(); - mx28_power_configure_power_source(); - mx28_enable_output_rail_protection(); + mxs_power_configure_power_source(); + mxs_enable_output_rail_protection(); - mx28_power_set_vddio(3300, 3150); + mxs_power_set_vddio(3300, 3150); - mx28_power_set_vddd(1350, 1200); + mxs_power_set_vddd(1350, 1200); writel(POWER_CTRL_VDDD_BO_IRQ | POWER_CTRL_VDDA_BO_IRQ | POWER_CTRL_VDDIO_BO_IRQ | POWER_CTRL_VDD5V_DROOP_IRQ | @@ -996,10 +997,10 @@ void mx28_power_init(void) } #ifdef CONFIG_SPL_MX28_PSWITCH_WAIT -void mx28_power_wait_pswitch(void) +void mxs_power_wait_pswitch(void) { - struct mx28_power_regs *power_regs = - (struct mx28_power_regs *)MXS_POWER_BASE; + struct mxs_power_regs *power_regs = + (struct mxs_power_regs *)MXS_POWER_BASE; while (!(readl(&power_regs->hw_power_sts) & POWER_STS_PSWITCH_MASK)) ; diff --git a/arch/arm/cpu/arm926ejs/mx28/start.S b/arch/arm/cpu/arm926ejs/mxs/start.S index e572b786bb..7ccd337174 100644 --- a/arch/arm/cpu/arm926ejs/mx28/start.S +++ b/arch/arm/cpu/arm926ejs/mxs/start.S @@ -180,14 +180,6 @@ _reset: orr r0,r0,#0xd3 msr cpsr,r0 - /* - * we do sys-critical inits only at reboot, - * not when booting from ram! - */ -#ifndef CONFIG_SKIP_LOWLEVEL_INIT - bl cpu_init_crit -#endif - bl board_init_ll /* @@ -207,40 +199,6 @@ _reset: pop {r0-r12,r14} bx lr -/* - ************************************************************************* - * - * CPU_init_critical registers - * - * setup important registers - * setup memory timing - * - ************************************************************************* - */ -#ifndef CONFIG_SKIP_LOWLEVEL_INIT -cpu_init_crit: - /* - * flush v4 I/D caches - */ - mov r0, #0 - mcr p15, 0, r0, c7, c7, 0 /* flush v3/v4 cache */ - mcr p15, 0, r0, c8, c7, 0 /* flush v4 TLB */ - - /* - * disable MMU stuff and caches - */ - mrc p15, 0, r0, c1, c0, 0 - bic r0, r0, #0x00002300 /* clear bits 13, 9:8 (--V- --RS) */ - bic r0, r0, #0x00000087 /* clear bits 7, 2:0 (B--- -CAM) */ - orr r0, r0, #0x00000002 /* set bit 2 (A) Align */ - orr r0, r0, #0x00001000 /* set bit 12 (I) I-Cache */ - mcr p15, 0, r0, c1, c0, 0 - - mov pc, lr /* back to my caller */ - - .align 5 -#endif /* CONFIG_SKIP_LOWLEVEL_INIT */ - _hang: ldr sp, _TEXT_BASE /* switch to abort stack */ 1: diff --git a/arch/arm/cpu/arm926ejs/mx28/timer.c b/arch/arm/cpu/arm926ejs/mxs/timer.c index 5b73f4a2b3..4ed75e604c 100644 --- a/arch/arm/cpu/arm926ejs/mx28/timer.c +++ b/arch/arm/cpu/arm926ejs/mxs/timer.c @@ -62,11 +62,11 @@ static inline unsigned long us_to_tick(unsigned long us) int timer_init(void) { - struct mx28_timrot_regs *timrot_regs = - (struct mx28_timrot_regs *)MXS_TIMROT_BASE; + struct mxs_timrot_regs *timrot_regs = + (struct mxs_timrot_regs *)MXS_TIMROT_BASE; /* Reset Timers and Rotary Encoder module */ - mx28_reset_block(&timrot_regs->hw_timrot_rotctrl_reg); + mxs_reset_block(&timrot_regs->hw_timrot_rotctrl_reg); /* Set fixed_count to 0 */ writel(0, &timrot_regs->hw_timrot_fixed_count0); @@ -84,8 +84,8 @@ int timer_init(void) unsigned long long get_ticks(void) { - struct mx28_timrot_regs *timrot_regs = - (struct mx28_timrot_regs *)MXS_TIMROT_BASE; + struct mxs_timrot_regs *timrot_regs = + (struct mxs_timrot_regs *)MXS_TIMROT_BASE; /* Current tick value */ uint32_t now = readl(&timrot_regs->hw_timrot_running_count0); diff --git a/arch/arm/cpu/arm926ejs/mxs/u-boot-imx28.bd b/arch/arm/cpu/arm926ejs/mxs/u-boot-imx28.bd new file mode 100644 index 0000000000..c60615a456 --- /dev/null +++ b/arch/arm/cpu/arm926ejs/mxs/u-boot-imx28.bd @@ -0,0 +1,14 @@ +sources { + u_boot_spl="spl/u-boot-spl.bin"; + u_boot="u-boot.bin"; +} + +section (0) { + load u_boot_spl > 0x0000; + load ivt (entry = 0x0014) > 0x8000; + hab call 0x8000; + + load u_boot > 0x40000100; + load ivt (entry = 0x40000100) > 0x8000; + hab call 0x8000; +} diff --git a/arch/arm/cpu/arm926ejs/mx28/u-boot-spl.lds b/arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds index 0fccd52968..f8ea38c03d 100644 --- a/arch/arm/cpu/arm926ejs/mx28/u-boot-spl.lds +++ b/arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds @@ -37,7 +37,7 @@ SECTIONS . = ALIGN(4); .text : { - arch/arm/cpu/arm926ejs/mx28/start.o (.text) + arch/arm/cpu/arm926ejs/mxs/start.o (.text) *(.text) } diff --git a/arch/arm/cpu/armv7/Makefile b/arch/arm/cpu/armv7/Makefile index 6b2addca11..4fdbee4bc0 100644 --- a/arch/arm/cpu/armv7/Makefile +++ b/arch/arm/cpu/armv7/Makefile @@ -32,8 +32,12 @@ COBJS += cache_v7.o COBJS += cpu.o COBJS += syslib.o +ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TEGRA20),) +SOBJS += lowlevel_init.o +endif + SRCS := $(START:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) +OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS)) START := $(addprefix $(obj),$(START)) all: $(obj).depend $(START) $(LIB) diff --git a/arch/arm/cpu/armv7/am33xx/board.c b/arch/arm/cpu/armv7/am33xx/board.c index 71309a7f47..b387ac27ec 100644 --- a/arch/arm/cpu/armv7/am33xx/board.c +++ b/arch/arm/cpu/armv7/am33xx/board.c @@ -17,15 +17,22 @@ */ #include <common.h> +#include <errno.h> #include <asm/arch/cpu.h> #include <asm/arch/hardware.h> #include <asm/arch/omap.h> #include <asm/arch/ddr_defs.h> #include <asm/arch/clock.h> +#include <asm/arch/gpio.h> #include <asm/arch/mmc_host_def.h> -#include <asm/arch/common_def.h> +#include <asm/arch/sys_proto.h> #include <asm/io.h> #include <asm/omap_common.h> +#include <asm/emif.h> +#include <asm/gpio.h> +#include <i2c.h> +#include <miiphy.h> +#include <cpsw.h> DECLARE_GLOBAL_DATA_PTR; @@ -33,6 +40,78 @@ struct wd_timer *wdtimer = (struct wd_timer *)WDT_BASE; struct gptimer *timer_base = (struct gptimer *)CONFIG_SYS_TIMERBASE; struct uart_sys *uart_base = (struct uart_sys *)DEFAULT_UART_BASE; +static const struct gpio_bank gpio_bank_am33xx[4] = { + { (void *)AM33XX_GPIO0_BASE, METHOD_GPIO_24XX }, + { (void *)AM33XX_GPIO1_BASE, METHOD_GPIO_24XX }, + { (void *)AM33XX_GPIO2_BASE, METHOD_GPIO_24XX }, + { (void *)AM33XX_GPIO3_BASE, METHOD_GPIO_24XX }, +}; + +const struct gpio_bank *const omap_gpio_bank = gpio_bank_am33xx; + +/* MII mode defines */ +#define MII_MODE_ENABLE 0x0 +#define RGMII_MODE_ENABLE 0xA + +/* GPIO that controls power to DDR on EVM-SK */ +#define GPIO_DDR_VTT_EN 7 + +static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE; + +static struct am335x_baseboard_id __attribute__((section (".data"))) header; + +static inline int board_is_bone(void) +{ + return !strncmp(header.name, "A335BONE", HDR_NAME_LEN); +} + +static inline int board_is_evm_sk(void) +{ + return !strncmp("A335X_SK", header.name, HDR_NAME_LEN); +} + +/* + * Read header information from EEPROM into global structure. + */ +static int read_eeprom(void) +{ + /* Check if baseboard eeprom is available */ + if (i2c_probe(CONFIG_SYS_I2C_EEPROM_ADDR)) { + puts("Could not probe the EEPROM; something fundamentally " + "wrong on the I2C bus.\n"); + return -ENODEV; + } + + /* read the eeprom using i2c */ + if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, 2, (uchar *)&header, + sizeof(header))) { + puts("Could not read the EEPROM; something fundamentally" + " wrong on the I2C bus.\n"); + return -EIO; + } + + if (header.magic != 0xEE3355AA) { + /* + * read the eeprom using i2c again, + * but use only a 1 byte address + */ + if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, 1, + (uchar *)&header, sizeof(header))) { + puts("Could not read the EEPROM; something " + "fundamentally wrong on the I2C bus.\n"); + return -EIO; + } + + if (header.magic != 0xEE3355AA) { + printf("Incorrect magic number (0x%x) in EEPROM\n", + header.magic); + return -EINVAL; + } + } + + return 0; +} + /* UART Defines */ #ifdef CONFIG_SPL_BUILD #define UART_RESET (0x1 << 1) @@ -57,6 +136,18 @@ static void init_timer(void) #endif /* + * Determine what type of DDR we have. + */ +static short inline board_memory_type(void) +{ + /* The following boards are known to use DDR3. */ + if (board_is_evm_sk()) + return EMIF_REG_SDRAM_TYPE_DDR3; + + return EMIF_REG_SDRAM_TYPE_DDR2; +} + +/* * early system init of muxing and clocks. */ void s_init(void) @@ -97,17 +188,36 @@ void s_init(void) preloader_console_init(); - config_ddr(); -#endif + /* Initalize the board header */ + enable_i2c0_pin_mux(); + i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); + if (read_eeprom() < 0) + puts("Could not get board ID.\n"); + + enable_board_pin_mux(&header); + if (board_is_evm_sk()) { + /* + * EVM SK 1.2A and later use gpio0_7 to enable DDR3. + * This is safe enough to do on older revs. + */ + gpio_request(GPIO_DDR_VTT_EN, "ddr_vtt_en"); + gpio_direction_output(GPIO_DDR_VTT_EN, 1); + } - /* Enable MMC0 */ - enable_mmc0_pin_mux(); + config_ddr(board_memory_type()); +#endif } #if defined(CONFIG_OMAP_HSMMC) && !defined(CONFIG_SPL_BUILD) int board_mmc_init(bd_t *bis) { - return omap_mmc_init(0, 0, 0); + int ret; + + ret = omap_mmc_init(0, 0, 0); + if (ret) + return ret; + + return omap_mmc_init(1, 0, 0); } #endif @@ -116,3 +226,93 @@ void setup_clocks_for_console(void) /* Not yet implemented */ return; } + +/* + * Basic board specific setup. Pinmux has been handled already. + */ +int board_init(void) +{ + i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); + if (read_eeprom() < 0) + puts("Could not get board ID.\n"); + + gd->bd->bi_boot_params = PHYS_DRAM_1 + 0x100; + + return 0; +} + +#ifdef CONFIG_DRIVER_TI_CPSW +static void cpsw_control(int enabled) +{ + /* VTP can be added here */ + + return; +} + +static struct cpsw_slave_data cpsw_slaves[] = { + { + .slave_reg_ofs = 0x208, + .sliver_reg_ofs = 0xd80, + .phy_id = 0, + }, + { + .slave_reg_ofs = 0x308, + .sliver_reg_ofs = 0xdc0, + .phy_id = 1, + }, +}; + +static struct cpsw_platform_data cpsw_data = { + .mdio_base = AM335X_CPSW_MDIO_BASE, + .cpsw_base = AM335X_CPSW_BASE, + .mdio_div = 0xff, + .channels = 8, + .cpdma_reg_ofs = 0x800, + .slaves = 1, + .slave_data = cpsw_slaves, + .ale_reg_ofs = 0xd00, + .ale_entries = 1024, + .host_port_reg_ofs = 0x108, + .hw_stats_reg_ofs = 0x900, + .mac_control = (1 << 5), + .control = cpsw_control, + .host_port_num = 0, + .version = CPSW_CTRL_VERSION_2, +}; + +int board_eth_init(bd_t *bis) +{ + uint8_t mac_addr[6]; + uint32_t mac_hi, mac_lo; + + if (!eth_getenv_enetaddr("ethaddr", mac_addr)) { + debug("<ethaddr> not set. Reading from E-fuse\n"); + /* try reading mac address from efuse */ + mac_lo = readl(&cdev->macid0l); + mac_hi = readl(&cdev->macid0h); + mac_addr[0] = mac_hi & 0xFF; + mac_addr[1] = (mac_hi & 0xFF00) >> 8; + mac_addr[2] = (mac_hi & 0xFF0000) >> 16; + mac_addr[3] = (mac_hi & 0xFF000000) >> 24; + mac_addr[4] = mac_lo & 0xFF; + mac_addr[5] = (mac_lo & 0xFF00) >> 8; + + if (is_valid_ether_addr(mac_addr)) + eth_setenv_enetaddr("ethaddr", mac_addr); + else + return -1; + } + + if (board_is_bone()) { + writel(MII_MODE_ENABLE, &cdev->miisel); + cpsw_slaves[0].phy_if = cpsw_slaves[1].phy_if = + PHY_INTERFACE_MODE_MII; + } else { + writel(RGMII_MODE_ENABLE, &cdev->miisel); + cpsw_slaves[0].phy_if = cpsw_slaves[1].phy_if = + PHY_INTERFACE_MODE_RGMII; + } + + return cpsw_register(&cpsw_data); +} +#endif diff --git a/arch/arm/cpu/armv7/am33xx/clock.c b/arch/arm/cpu/armv7/am33xx/clock.c index bbb9c1353f..2b19506a34 100644 --- a/arch/arm/cpu/armv7/am33xx/clock.c +++ b/arch/arm/cpu/armv7/am33xx/clock.c @@ -24,6 +24,7 @@ #define PRCM_MOD_EN 0x2 #define PRCM_FORCE_WAKEUP 0x2 +#define PRCM_FUNCTL 0x0 #define PRCM_EMIF_CLK_ACTIVITY BIT(2) #define PRCM_L3_GCLK_ACTIVITY BIT(4) @@ -38,7 +39,7 @@ #define CLK_MODE_SEL 0x7 #define CLK_MODE_MASK 0xfffffff8 #define CLK_DIV_SEL 0xFFFFFFE0 - +#define CPGMAC0_IDLE 0x30000 const struct cm_perpll *cmper = (struct cm_perpll *)CM_PER; const struct cm_wkuppll *cmwkup = (struct cm_wkuppll *)CM_WKUP; @@ -70,6 +71,10 @@ static void enable_interface_clocks(void) writel(PRCM_MOD_EN, &cmper->l4hsclkctrl); while (readl(&cmper->l4hsclkctrl) != PRCM_MOD_EN) ; + + writel(PRCM_MOD_EN, &cmwkup->wkgpio0clkctrl); + while (readl(&cmwkup->wkgpio0clkctrl) != PRCM_MOD_EN) + ; } /* @@ -118,6 +123,36 @@ static void enable_per_clocks(void) writel(PRCM_MOD_EN, &cmwkup->wkup_i2c0ctrl); while (readl(&cmwkup->wkup_i2c0ctrl) != PRCM_MOD_EN) ; + + /* gpio1 module */ + writel(PRCM_MOD_EN, &cmper->gpio1clkctrl); + while (readl(&cmper->gpio1clkctrl) != PRCM_MOD_EN) + ; + + /* gpio2 module */ + writel(PRCM_MOD_EN, &cmper->gpio2clkctrl); + while (readl(&cmper->gpio2clkctrl) != PRCM_MOD_EN) + ; + + /* gpio3 module */ + writel(PRCM_MOD_EN, &cmper->gpio3clkctrl); + while (readl(&cmper->gpio3clkctrl) != PRCM_MOD_EN) + ; + + /* i2c1 */ + writel(PRCM_MOD_EN, &cmper->i2c1clkctrl); + while (readl(&cmper->i2c1clkctrl) != PRCM_MOD_EN) + ; + + /* Ethernet */ + writel(PRCM_MOD_EN, &cmper->cpgmac0clkctrl); + while ((readl(&cmper->cpgmac0clkctrl) & CPGMAC0_IDLE) != PRCM_FUNCTL) + ; + + /* spi0 */ + writel(PRCM_MOD_EN, &cmper->spi0clkctrl); + while (readl(&cmper->spi0clkctrl) != PRCM_MOD_EN) + ; } static void mpu_pll_config(void) @@ -216,7 +251,7 @@ static void per_pll_config(void) ; } -static void ddr_pll_config(void) +void ddr_pll_config(unsigned int ddrpll_m) { u32 clkmode, clksel, div_m2; @@ -234,7 +269,7 @@ static void ddr_pll_config(void) ; clksel = clksel & (~CLK_SEL_MASK); - clksel = clksel | ((DDRPLL_M << CLK_SEL_SHIFT) | DDRPLL_N); + clksel = clksel | ((ddrpll_m << CLK_SEL_SHIFT) | DDRPLL_N); writel(clksel, &cmwkup->clkseldpllddr); div_m2 = div_m2 & CLK_DIV_SEL; @@ -255,11 +290,6 @@ void enable_emif_clocks(void) writel(PRCM_MOD_EN, &cmper->emiffwclkctrl); /* Enable EMIF0 Clock */ writel(PRCM_MOD_EN, &cmper->emifclkctrl); - /* Poll for emif_gclk & L3_G clock are active */ - while ((readl(&cmper->l3clkstctrl) & (PRCM_EMIF_CLK_ACTIVITY | - PRCM_L3_GCLK_ACTIVITY)) != (PRCM_EMIF_CLK_ACTIVITY | - PRCM_L3_GCLK_ACTIVITY)) - ; /* Poll if module is functional */ while ((readl(&cmper->emifclkctrl)) != PRCM_MOD_EN) ; @@ -273,7 +303,6 @@ void pll_init() mpu_pll_config(); core_pll_config(); per_pll_config(); - ddr_pll_config(); /* Enable the required interconnect clocks */ enable_interface_clocks(); diff --git a/arch/arm/cpu/armv7/am33xx/ddr.c b/arch/arm/cpu/armv7/am33xx/ddr.c index ed982c11e8..fd9fc4a720 100644 --- a/arch/arm/cpu/armv7/am33xx/ddr.c +++ b/arch/arm/cpu/armv7/am33xx/ddr.c @@ -17,13 +17,15 @@ http://www.ti.com/ #include <asm/arch/cpu.h> #include <asm/arch/ddr_defs.h> +#include <asm/arch/sys_proto.h> #include <asm/io.h> +#include <asm/emif.h> /** * Base address for EMIF instances */ -static struct emif_regs *emif_reg = { - (struct emif_regs *)EMIF4_0_CFG_BASE}; +static struct emif_reg_struct *emif_reg = { + (struct emif_reg_struct *)EMIF4_0_CFG_BASE}; /** * Base address for DDR instance @@ -39,109 +41,79 @@ static struct ddr_cmdtctrl *ioctrl_reg = { (struct ddr_cmdtctrl *)DDR_CONTROL_BASE_ADDR}; /** - * As a convention, all functions here return 0 on success - * -1 on failure. - */ - -/** * Configure SDRAM */ -int config_sdram(struct sdram_config *cfg) +void config_sdram(const struct emif_regs *regs) { - writel(cfg->sdrcr, &emif_reg->sdrcr); - writel(cfg->sdrcr2, &emif_reg->sdrcr2); - writel(cfg->refresh, &emif_reg->sdrrcr); - writel(cfg->refresh_sh, &emif_reg->sdrrcsr); - - return 0; + writel(regs->ref_ctrl, &emif_reg->emif_sdram_ref_ctrl); + writel(regs->ref_ctrl, &emif_reg->emif_sdram_ref_ctrl_shdw); + if (regs->zq_config){ + writel(regs->zq_config, &emif_reg->emif_zq_config); + writel(regs->sdram_config, &cstat->secure_emif_sdram_config); + } + writel(regs->sdram_config, &emif_reg->emif_sdram_config); } /** * Set SDRAM timings */ -int set_sdram_timings(struct sdram_timing *t) +void set_sdram_timings(const struct emif_regs *regs) { - writel(t->time1, &emif_reg->sdrtim1); - writel(t->time1_sh, &emif_reg->sdrtim1sr); - writel(t->time2, &emif_reg->sdrtim2); - writel(t->time2_sh, &emif_reg->sdrtim2sr); - writel(t->time3, &emif_reg->sdrtim3); - writel(t->time3_sh, &emif_reg->sdrtim3sr); - - return 0; + writel(regs->sdram_tim1, &emif_reg->emif_sdram_tim_1); + writel(regs->sdram_tim1, &emif_reg->emif_sdram_tim_1_shdw); + writel(regs->sdram_tim2, &emif_reg->emif_sdram_tim_2); + writel(regs->sdram_tim2, &emif_reg->emif_sdram_tim_2_shdw); + writel(regs->sdram_tim3, &emif_reg->emif_sdram_tim_3); + writel(regs->sdram_tim3, &emif_reg->emif_sdram_tim_3_shdw); } /** * Configure DDR PHY */ -int config_ddr_phy(struct ddr_phy_control *p) +void config_ddr_phy(const struct emif_regs *regs) { - writel(p->reg, &emif_reg->ddrphycr); - writel(p->reg_sh, &emif_reg->ddrphycsr); - - return 0; + writel(regs->emif_ddr_phy_ctlr_1, &emif_reg->emif_ddr_phy_ctrl_1); + writel(regs->emif_ddr_phy_ctlr_1, &emif_reg->emif_ddr_phy_ctrl_1_shdw); } /** * Configure DDR CMD control registers */ -int config_cmd_ctrl(struct cmd_control *cmd) +void config_cmd_ctrl(const struct cmd_control *cmd) { writel(cmd->cmd0csratio, &ddr_reg[0]->cm0csratio); - writel(cmd->cmd0csforce, &ddr_reg[0]->cm0csforce); - writel(cmd->cmd0csdelay, &ddr_reg[0]->cm0csdelay); writel(cmd->cmd0dldiff, &ddr_reg[0]->cm0dldiff); writel(cmd->cmd0iclkout, &ddr_reg[0]->cm0iclkout); writel(cmd->cmd1csratio, &ddr_reg[0]->cm1csratio); - writel(cmd->cmd1csforce, &ddr_reg[0]->cm1csforce); - writel(cmd->cmd1csdelay, &ddr_reg[0]->cm1csdelay); writel(cmd->cmd1dldiff, &ddr_reg[0]->cm1dldiff); writel(cmd->cmd1iclkout, &ddr_reg[0]->cm1iclkout); writel(cmd->cmd2csratio, &ddr_reg[0]->cm2csratio); - writel(cmd->cmd2csforce, &ddr_reg[0]->cm2csforce); - writel(cmd->cmd2csdelay, &ddr_reg[0]->cm2csdelay); writel(cmd->cmd2dldiff, &ddr_reg[0]->cm2dldiff); writel(cmd->cmd2iclkout, &ddr_reg[0]->cm2iclkout); - - return 0; } /** * Configure DDR DATA registers */ -int config_ddr_data(int macrono, struct ddr_data *data) +void config_ddr_data(int macrono, const struct ddr_data *data) { writel(data->datardsratio0, &ddr_reg[macrono]->dt0rdsratio0); - writel(data->datardsratio1, &ddr_reg[macrono]->dt0rdsratio1); - writel(data->datawdsratio0, &ddr_reg[macrono]->dt0wdsratio0); - writel(data->datawdsratio1, &ddr_reg[macrono]->dt0wdsratio1); - writel(data->datawiratio0, &ddr_reg[macrono]->dt0wiratio0); - writel(data->datawiratio1, &ddr_reg[macrono]->dt0wiratio1); writel(data->datagiratio0, &ddr_reg[macrono]->dt0giratio0); - writel(data->datagiratio1, &ddr_reg[macrono]->dt0giratio1); - writel(data->datafwsratio0, &ddr_reg[macrono]->dt0fwsratio0); - writel(data->datafwsratio1, &ddr_reg[macrono]->dt0fwsratio1); - writel(data->datawrsratio0, &ddr_reg[macrono]->dt0wrsratio0); - writel(data->datawrsratio1, &ddr_reg[macrono]->dt0wrsratio1); - + writel(data->datauserank0delay, &ddr_reg[macrono]->dt0rdelays0); writel(data->datadldiff0, &ddr_reg[macrono]->dt0dldiff0); - - return 0; } -int config_io_ctrl(struct ddr_ioctrl *ioctrl) +void config_io_ctrl(unsigned long val) { - writel(ioctrl->cmd1ctl, &ioctrl_reg->cm0ioctl); - writel(ioctrl->cmd2ctl, &ioctrl_reg->cm1ioctl); - writel(ioctrl->cmd3ctl, &ioctrl_reg->cm2ioctl); - writel(ioctrl->data1ctl, &ioctrl_reg->dt0ioctl); - writel(ioctrl->data2ctl, &ioctrl_reg->dt1ioctl); - - return 0; + writel(val, &ioctrl_reg->cm0ioctl); + writel(val, &ioctrl_reg->cm1ioctl); + writel(val, &ioctrl_reg->cm2ioctl); + writel(val, &ioctrl_reg->dt0ioctl); + writel(val, &ioctrl_reg->dt1ioctl); } diff --git a/arch/arm/cpu/armv7/am33xx/emif4.c b/arch/arm/cpu/armv7/am33xx/emif4.c index 2f4164df82..b2d7c0d956 100644 --- a/arch/arm/cpu/armv7/am33xx/emif4.c +++ b/arch/arm/cpu/armv7/am33xx/emif4.c @@ -21,15 +21,12 @@ #include <asm/arch/ddr_defs.h> #include <asm/arch/hardware.h> #include <asm/arch/clock.h> +#include <asm/arch/sys_proto.h> #include <asm/io.h> +#include <asm/emif.h> DECLARE_GLOBAL_DATA_PTR; -struct ddr_regs *ddrregs = (struct ddr_regs *)DDR_PHY_BASE_ADDR; -struct vtp_reg *vtpreg = (struct vtp_reg *)VTP0_CTRL_ADDR; -struct ddr_ctrl *ddrctrl = (struct ddr_ctrl *)DDR_CTRL_ADDR; - - int dram_init(void) { /* dram_init must store complete ramsize in gd->ram_size */ @@ -47,58 +44,80 @@ void dram_init_banksize(void) #ifdef CONFIG_SPL_BUILD -static void data_macro_config(int dataMacroNum) -{ - struct ddr_data data; - - data.datardsratio0 = ((DDR2_RD_DQS<<30)|(DDR2_RD_DQS<<20) - |(DDR2_RD_DQS<<10)|(DDR2_RD_DQS<<0)); - data.datardsratio1 = DDR2_RD_DQS>>2; - data.datawdsratio0 = ((DDR2_WR_DQS<<30)|(DDR2_WR_DQS<<20) - |(DDR2_WR_DQS<<10)|(DDR2_WR_DQS<<0)); - data.datawdsratio1 = DDR2_WR_DQS>>2; - data.datawiratio0 = ((DDR2_PHY_WRLVL<<30)|(DDR2_PHY_WRLVL<<20) - |(DDR2_PHY_WRLVL<<10)|(DDR2_PHY_WRLVL<<0)); - data.datawiratio1 = DDR2_PHY_WRLVL>>2; - data.datagiratio0 = ((DDR2_PHY_GATELVL<<30)|(DDR2_PHY_GATELVL<<20) - |(DDR2_PHY_GATELVL<<10)|(DDR2_PHY_GATELVL<<0)); - data.datagiratio1 = DDR2_PHY_GATELVL>>2; - data.datafwsratio0 = ((DDR2_PHY_FIFO_WE<<30)|(DDR2_PHY_FIFO_WE<<20) - |(DDR2_PHY_FIFO_WE<<10)|(DDR2_PHY_FIFO_WE<<0)); - data.datafwsratio1 = DDR2_PHY_FIFO_WE>>2; - data.datawrsratio0 = ((DDR2_PHY_WR_DATA<<30)|(DDR2_PHY_WR_DATA<<20) - |(DDR2_PHY_WR_DATA<<10)|(DDR2_PHY_WR_DATA<<0)); - data.datawrsratio1 = DDR2_PHY_WR_DATA>>2; - data.datadldiff0 = PHY_DLL_LOCK_DIFF; - - config_ddr_data(dataMacroNum, &data); -} - -static void cmd_macro_config(void) -{ - struct cmd_control cmd; - - cmd.cmd0csratio = DDR2_RATIO; - cmd.cmd0csforce = CMD_FORCE; - cmd.cmd0csdelay = CMD_DELAY; - cmd.cmd0dldiff = DDR2_DLL_LOCK_DIFF; - cmd.cmd0iclkout = DDR2_INVERT_CLKOUT; - - cmd.cmd1csratio = DDR2_RATIO; - cmd.cmd1csforce = CMD_FORCE; - cmd.cmd1csdelay = CMD_DELAY; - cmd.cmd1dldiff = DDR2_DLL_LOCK_DIFF; - cmd.cmd1iclkout = DDR2_INVERT_CLKOUT; - - cmd.cmd2csratio = DDR2_RATIO; - cmd.cmd2csforce = CMD_FORCE; - cmd.cmd2csdelay = CMD_DELAY; - cmd.cmd2dldiff = DDR2_DLL_LOCK_DIFF; - cmd.cmd2iclkout = DDR2_INVERT_CLKOUT; - - config_cmd_ctrl(&cmd); - -} +static struct vtp_reg *vtpreg = (struct vtp_reg *)VTP0_CTRL_ADDR; +static struct ddr_ctrl *ddrctrl = (struct ddr_ctrl *)DDR_CTRL_ADDR; + +static const struct ddr_data ddr2_data = { + .datardsratio0 = ((DDR2_RD_DQS<<30)|(DDR2_RD_DQS<<20) + |(DDR2_RD_DQS<<10)|(DDR2_RD_DQS<<0)), + .datawdsratio0 = ((DDR2_WR_DQS<<30)|(DDR2_WR_DQS<<20) + |(DDR2_WR_DQS<<10)|(DDR2_WR_DQS<<0)), + .datawiratio0 = ((DDR2_PHY_WRLVL<<30)|(DDR2_PHY_WRLVL<<20) + |(DDR2_PHY_WRLVL<<10)|(DDR2_PHY_WRLVL<<0)), + .datagiratio0 = ((DDR2_PHY_GATELVL<<30)|(DDR2_PHY_GATELVL<<20) + |(DDR2_PHY_GATELVL<<10)|(DDR2_PHY_GATELVL<<0)), + .datafwsratio0 = ((DDR2_PHY_FIFO_WE<<30)|(DDR2_PHY_FIFO_WE<<20) + |(DDR2_PHY_FIFO_WE<<10)|(DDR2_PHY_FIFO_WE<<0)), + .datawrsratio0 = ((DDR2_PHY_WR_DATA<<30)|(DDR2_PHY_WR_DATA<<20) + |(DDR2_PHY_WR_DATA<<10)|(DDR2_PHY_WR_DATA<<0)), + .datauserank0delay = DDR2_PHY_RANK0_DELAY, + .datadldiff0 = PHY_DLL_LOCK_DIFF, +}; + +static const struct cmd_control ddr2_cmd_ctrl_data = { + .cmd0csratio = DDR2_RATIO, + .cmd0dldiff = DDR2_DLL_LOCK_DIFF, + .cmd0iclkout = DDR2_INVERT_CLKOUT, + + .cmd1csratio = DDR2_RATIO, + .cmd1dldiff = DDR2_DLL_LOCK_DIFF, + .cmd1iclkout = DDR2_INVERT_CLKOUT, + + .cmd2csratio = DDR2_RATIO, + .cmd2dldiff = DDR2_DLL_LOCK_DIFF, + .cmd2iclkout = DDR2_INVERT_CLKOUT, +}; + +static const struct emif_regs ddr2_emif_reg_data = { + .sdram_config = DDR2_EMIF_SDCFG, + .ref_ctrl = DDR2_EMIF_SDREF, + .sdram_tim1 = DDR2_EMIF_TIM1, + .sdram_tim2 = DDR2_EMIF_TIM2, + .sdram_tim3 = DDR2_EMIF_TIM3, + .emif_ddr_phy_ctlr_1 = DDR2_EMIF_READ_LATENCY, +}; + +static const struct ddr_data ddr3_data = { + .datardsratio0 = DDR3_RD_DQS, + .datawdsratio0 = DDR3_WR_DQS, + .datafwsratio0 = DDR3_PHY_FIFO_WE, + .datawrsratio0 = DDR3_PHY_WR_DATA, + .datadldiff0 = PHY_DLL_LOCK_DIFF, +}; + +static const struct cmd_control ddr3_cmd_ctrl_data = { + .cmd0csratio = DDR3_RATIO, + .cmd0dldiff = DDR3_DLL_LOCK_DIFF, + .cmd0iclkout = DDR3_INVERT_CLKOUT, + + .cmd1csratio = DDR3_RATIO, + .cmd1dldiff = DDR3_DLL_LOCK_DIFF, + .cmd1iclkout = DDR3_INVERT_CLKOUT, + + .cmd2csratio = DDR3_RATIO, + .cmd2dldiff = DDR3_DLL_LOCK_DIFF, + .cmd2iclkout = DDR3_INVERT_CLKOUT, +}; + +static struct emif_regs ddr3_emif_reg_data = { + .sdram_config = DDR3_EMIF_SDCFG, + .ref_ctrl = DDR3_EMIF_SDREF, + .sdram_tim1 = DDR3_EMIF_TIM1, + .sdram_tim2 = DDR3_EMIF_TIM2, + .sdram_tim3 = DDR3_EMIF_TIM3, + .zq_config = DDR3_ZQ_CFG, + .emif_ddr_phy_ctlr_1 = DDR3_EMIF_READ_LATENCY, +}; static void config_vtp(void) { @@ -115,87 +134,46 @@ static void config_vtp(void) ; } -static void config_emif_ddr2(void) -{ - int i; - int ret; - struct sdram_config cfg; - struct sdram_timing tmg; - struct ddr_phy_control phyc; - - /*Program EMIF0 CFG Registers*/ - phyc.reg = EMIF_READ_LATENCY; - phyc.reg_sh = EMIF_READ_LATENCY; - phyc.reg2 = EMIF_READ_LATENCY; - - tmg.time1 = EMIF_TIM1; - tmg.time1_sh = EMIF_TIM1; - tmg.time2 = EMIF_TIM2; - tmg.time2_sh = EMIF_TIM2; - tmg.time3 = EMIF_TIM3; - tmg.time3_sh = EMIF_TIM3; - - cfg.sdrcr = EMIF_SDCFG; - cfg.sdrcr2 = EMIF_SDCFG; - cfg.refresh = 0x00004650; - cfg.refresh_sh = 0x00004650; - - /* Program EMIF instance */ - ret = config_ddr_phy(&phyc); - if (ret < 0) - printf("Couldn't configure phyc\n"); - - ret = config_sdram(&cfg); - if (ret < 0) - printf("Couldn't configure SDRAM\n"); - - ret = set_sdram_timings(&tmg); - if (ret < 0) - printf("Couldn't configure timings\n"); - - /* Delay */ - for (i = 0; i < 5000; i++) - ; - - cfg.refresh = EMIF_SDREF; - cfg.refresh_sh = EMIF_SDREF; - cfg.sdrcr = EMIF_SDCFG; - cfg.sdrcr2 = EMIF_SDCFG; - - ret = config_sdram(&cfg); - if (ret < 0) - printf("Couldn't configure SDRAM\n"); -} - -void config_ddr(void) +void config_ddr(short ddr_type) { - int data_macro_0 = 0; - int data_macro_1 = 1; - struct ddr_ioctrl ioctrl; + int ddr_pll, ioctrl_val; + const struct emif_regs *emif_regs; + const struct ddr_data *ddr_data; + const struct cmd_control *cmd_ctrl_data; + + if (ddr_type == EMIF_REG_SDRAM_TYPE_DDR2) { + ddr_pll = 266; + cmd_ctrl_data = &ddr2_cmd_ctrl_data; + ddr_data = &ddr2_data; + ioctrl_val = DDR2_IOCTRL_VALUE; + emif_regs = &ddr2_emif_reg_data; + } else if (ddr_type == EMIF_REG_SDRAM_TYPE_DDR3) { + ddr_pll = 303; + cmd_ctrl_data = &ddr3_cmd_ctrl_data; + ddr_data = &ddr3_data; + ioctrl_val = DDR3_IOCTRL_VALUE; + emif_regs = &ddr3_emif_reg_data; + } else { + puts("Unknown memory type"); + hang(); + } enable_emif_clocks(); - + ddr_pll_config(ddr_pll); config_vtp(); + config_cmd_ctrl(cmd_ctrl_data); - cmd_macro_config(); - - data_macro_config(data_macro_0); - data_macro_config(data_macro_1); + config_ddr_data(0, ddr_data); + config_ddr_data(1, ddr_data); - writel(PHY_RANK0_DELAY, &ddrregs->dt0rdelays0); - writel(PHY_RANK0_DELAY, &ddrregs->dt1rdelays0); + config_io_ctrl(ioctrl_val); - ioctrl.cmd1ctl = DDR_IOCTRL_VALUE; - ioctrl.cmd2ctl = DDR_IOCTRL_VALUE; - ioctrl.cmd3ctl = DDR_IOCTRL_VALUE; - ioctrl.data1ctl = DDR_IOCTRL_VALUE; - ioctrl.data2ctl = DDR_IOCTRL_VALUE; + /* Set CKE to be controlled by EMIF/DDR PHY */ + writel(DDR_CKE_CTRL_NORMAL, &ddrctrl->ddrckectrl); - config_io_ctrl(&ioctrl); - - writel(readl(&ddrctrl->ddrioctrl) & 0xefffffff, &ddrctrl->ddrioctrl); - writel(readl(&ddrctrl->ddrckectrl) | 0x00000001, &ddrctrl->ddrckectrl); - - config_emif_ddr2(); + /* Program EMIF instance */ + config_ddr_phy(emif_regs); + set_sdram_timings(emif_regs); + config_sdram(emif_regs); } #endif diff --git a/arch/arm/cpu/armv7/config.mk b/arch/arm/cpu/armv7/config.mk index 560c084dc9..5407cb68a8 100644 --- a/arch/arm/cpu/armv7/config.mk +++ b/arch/arm/cpu/armv7/config.mk @@ -26,8 +26,6 @@ PLATFORM_RELFLAGS += -fno-common -ffixed-r8 -msoft-float # supported by more tool-chains PF_CPPFLAGS_ARMV7 := $(call cc-option, -march=armv7-a, -march=armv5) PLATFORM_CPPFLAGS += $(PF_CPPFLAGS_ARMV7) -PF_CPPFLAGS_NO_UNALIGNED := $(call cc-option, -mno-unaligned-access,) -PLATFORM_CPPFLAGS += $(PF_CPPFLAGS_NO_UNALIGNED) # ========================================================================= # diff --git a/arch/arm/cpu/armv7/cpu.c b/arch/arm/cpu/armv7/cpu.c index c6fa8ef136..39a80237cd 100644 --- a/arch/arm/cpu/armv7/cpu.c +++ b/arch/arm/cpu/armv7/cpu.c @@ -36,13 +36,9 @@ #include <asm/system.h> #include <asm/cache.h> #include <asm/armv7.h> +#include <linux/compiler.h> -void save_boot_params_default(u32 r0, u32 r1, u32 r2, u32 r3) -{ -} - -void save_boot_params(u32 r0, u32 r1, u32 r2, u32 r3) - __attribute__((weak, alias("save_boot_params_default"))); +void __weak cpu_cache_initialization(void){} int cleanup_before_linux(void) { @@ -81,5 +77,10 @@ int cleanup_before_linux(void) */ invalidate_dcache_all(); + /* + * Some CPU need more cache attention before starting the kernel. + */ + cpu_cache_initialization(); + return 0; } diff --git a/arch/arm/cpu/armv7/exynos/clock.c b/arch/arm/cpu/armv7/exynos/clock.c index f7829b2cc7..4f3b451be9 100644 --- a/arch/arm/cpu/armv7/exynos/clock.c +++ b/arch/arm/cpu/armv7/exynos/clock.c @@ -98,7 +98,7 @@ static unsigned long exynos5_get_pll_clk(int pllreg) struct exynos5_clock *clk = (struct exynos5_clock *)samsung_get_base_clock(); unsigned long r, m, p, s, k = 0, mask, fout; - unsigned int freq; + unsigned int freq, pll_div2_sel, fout_sel; switch (pllreg) { case APLL: @@ -115,6 +115,9 @@ static unsigned long exynos5_get_pll_clk(int pllreg) r = readl(&clk->vpll_con0); k = readl(&clk->vpll_con1); break; + case BPLL: + r = readl(&clk->bpll_con0); + break; default: printf("Unsupported PLL (%d)\n", pllreg); return 0; @@ -125,8 +128,9 @@ static unsigned long exynos5_get_pll_clk(int pllreg) * MPLL_CON: MIDV [25:16] * EPLL_CON: MIDV [24:16] * VPLL_CON: MIDV [24:16] + * BPLL_CON: MIDV [25:16] */ - if (pllreg == APLL || pllreg == MPLL) + if (pllreg == APLL || pllreg == MPLL || pllreg == BPLL) mask = 0x3ff; else mask = 0x1ff; @@ -155,6 +159,29 @@ static unsigned long exynos5_get_pll_clk(int pllreg) fout = m * (freq / (p * (1 << (s - 1)))); } + /* According to the user manual, in EVT1 MPLL and BPLL always gives + * 1.6GHz clock, so divide by 2 to get 800MHz MPLL clock.*/ + if (pllreg == MPLL || pllreg == BPLL) { + pll_div2_sel = readl(&clk->pll_div2_sel); + + switch (pllreg) { + case MPLL: + fout_sel = (pll_div2_sel >> MPLL_FOUT_SEL_SHIFT) + & MPLL_FOUT_SEL_MASK; + break; + case BPLL: + fout_sel = (pll_div2_sel >> BPLL_FOUT_SEL_SHIFT) + & BPLL_FOUT_SEL_MASK; + break; + default: + fout_sel = -1; + break; + } + + if (fout_sel == 0) + fout /= 2; + } + return fout; } @@ -456,6 +483,48 @@ static unsigned long exynos4_get_lcd_clk(void) return pclk; } +/* get_lcd_clk: return lcd clock frequency */ +static unsigned long exynos5_get_lcd_clk(void) +{ + struct exynos5_clock *clk = + (struct exynos5_clock *)samsung_get_base_clock(); + unsigned long pclk, sclk; + unsigned int sel; + unsigned int ratio; + + /* + * CLK_SRC_LCD0 + * FIMD0_SEL [3:0] + */ + sel = readl(&clk->src_disp1_0); + sel = sel & 0xf; + + /* + * 0x6: SCLK_MPLL + * 0x7: SCLK_EPLL + * 0x8: SCLK_VPLL + */ + if (sel == 0x6) + sclk = get_pll_clk(MPLL); + else if (sel == 0x7) + sclk = get_pll_clk(EPLL); + else if (sel == 0x8) + sclk = get_pll_clk(VPLL); + else + return 0; + + /* + * CLK_DIV_LCD0 + * FIMD0_RATIO [3:0] + */ + ratio = readl(&clk->div_disp1_0); + ratio = ratio & 0xf; + + pclk = sclk / (ratio + 1); + + return pclk; +} + void exynos4_set_lcd_clk(void) { struct exynos4_clock *clk = @@ -518,6 +587,68 @@ void exynos4_set_lcd_clk(void) writel(cfg, &clk->div_lcd0); } +void exynos5_set_lcd_clk(void) +{ + struct exynos5_clock *clk = + (struct exynos5_clock *)samsung_get_base_clock(); + unsigned int cfg = 0; + + /* + * CLK_GATE_BLOCK + * CLK_CAM [0] + * CLK_TV [1] + * CLK_MFC [2] + * CLK_G3D [3] + * CLK_LCD0 [4] + * CLK_LCD1 [5] + * CLK_GPS [7] + */ + cfg = readl(&clk->gate_block); + cfg |= 1 << 4; + writel(cfg, &clk->gate_block); + + /* + * CLK_SRC_LCD0 + * FIMD0_SEL [3:0] + * MDNIE0_SEL [7:4] + * MDNIE_PWM0_SEL [8:11] + * MIPI0_SEL [12:15] + * set lcd0 src clock 0x6: SCLK_MPLL + */ + cfg = readl(&clk->src_disp1_0); + cfg &= ~(0xf); + cfg |= 0x8; + writel(cfg, &clk->src_disp1_0); + + /* + * CLK_GATE_IP_LCD0 + * CLK_FIMD0 [0] + * CLK_MIE0 [1] + * CLK_MDNIE0 [2] + * CLK_DSIM0 [3] + * CLK_SMMUFIMD0 [4] + * CLK_PPMULCD0 [5] + * Gating all clocks for FIMD0 + */ + cfg = readl(&clk->gate_ip_disp1); + cfg |= 1 << 0; + writel(cfg, &clk->gate_ip_disp1); + + /* + * CLK_DIV_LCD0 + * FIMD0_RATIO [3:0] + * MDNIE0_RATIO [7:4] + * MDNIE_PWM0_RATIO [11:8] + * MDNIE_PWM_PRE_RATIO [15:12] + * MIPI0_RATIO [19:16] + * MIPI0_PRE_RATIO [23:20] + * set fimd ratio + */ + cfg &= ~(0xf); + cfg |= 0x0; + writel(cfg, &clk->div_disp1_0); +} + void exynos4_set_mipi_clk(void) { struct exynos4_clock *clk = @@ -656,13 +787,15 @@ unsigned long get_lcd_clk(void) if (cpu_is_exynos4()) return exynos4_get_lcd_clk(); else - return 0; + return exynos5_get_lcd_clk(); } void set_lcd_clk(void) { if (cpu_is_exynos4()) exynos4_set_lcd_clk(); + else + exynos5_set_lcd_clk(); } void set_mipi_clk(void) diff --git a/arch/arm/cpu/armv7/exynos/pinmux.c b/arch/arm/cpu/armv7/exynos/pinmux.c index d28f05557f..7776add9db 100644 --- a/arch/arm/cpu/armv7/exynos/pinmux.c +++ b/arch/arm/cpu/armv7/exynos/pinmux.c @@ -40,8 +40,8 @@ static void exynos5_uart_config(int peripheral) count = 4; break; case PERIPH_ID_UART1: - bank = &gpio1->a0; - start = 4; + bank = &gpio1->d0; + start = 0; count = 4; break; case PERIPH_ID_UART2: @@ -66,23 +66,27 @@ static int exynos5_mmc_config(int peripheral, int flags) struct exynos5_gpio_part1 *gpio1 = (struct exynos5_gpio_part1 *) samsung_get_base_gpio_part1(); struct s5p_gpio_bank *bank, *bank_ext; - int i; + int i, start = 0, gpio_func = 0; switch (peripheral) { case PERIPH_ID_SDMMC0: bank = &gpio1->c0; bank_ext = &gpio1->c1; + start = 0; + gpio_func = GPIO_FUNC(0x2); break; case PERIPH_ID_SDMMC1: - bank = &gpio1->c1; + bank = &gpio1->c2; bank_ext = NULL; break; case PERIPH_ID_SDMMC2: - bank = &gpio1->c2; - bank_ext = &gpio1->c3; + bank = &gpio1->c3; + bank_ext = &gpio1->c4; + start = 3; + gpio_func = GPIO_FUNC(0x3); break; case PERIPH_ID_SDMMC3: - bank = &gpio1->c3; + bank = &gpio1->c4; bank_ext = NULL; break; } @@ -92,8 +96,8 @@ static int exynos5_mmc_config(int peripheral, int flags) return -1; } if (flags & PINMUX_FLAG_8BIT_MODE) { - for (i = 3; i <= 6; i++) { - s5p_gpio_cfg_pin(bank_ext, i, GPIO_FUNC(0x3)); + for (i = start; i <= (start + 3); i++) { + s5p_gpio_cfg_pin(bank_ext, i, gpio_func); s5p_gpio_set_pull(bank_ext, i, GPIO_PULL_UP); s5p_gpio_set_drv(bank_ext, i, GPIO_DRV_4X); } diff --git a/arch/arm/cpu/armv7/exynos/power.c b/arch/arm/cpu/armv7/exynos/power.c index 4116781a36..d4bce6d4dd 100644 --- a/arch/arm/cpu/armv7/exynos/power.c +++ b/arch/arm/cpu/armv7/exynos/power.c @@ -74,3 +74,24 @@ void set_usbhost_phy_ctrl(unsigned int enable) if (cpu_is_exynos5()) exynos5_set_usbhost_phy_ctrl(enable); } + +static void exynos5_dp_phy_control(unsigned int enable) +{ + unsigned int cfg; + struct exynos5_power *power = + (struct exynos5_power *)samsung_get_base_power(); + + cfg = readl(&power->dptx_phy_control); + if (enable) + cfg |= EXYNOS_DP_PHY_ENABLE; + else + cfg &= ~EXYNOS_DP_PHY_ENABLE; + + writel(cfg, &power->dptx_phy_control); +} + +void set_dp_phy_ctrl(unsigned int enable) +{ + if (cpu_is_exynos5()) + exynos5_dp_phy_control(enable); +} diff --git a/arch/arm/cpu/armv7/exynos/soc.c b/arch/arm/cpu/armv7/exynos/soc.c index dcfcec22dc..ab65b8d3a8 100644 --- a/arch/arm/cpu/armv7/exynos/soc.c +++ b/arch/arm/cpu/armv7/exynos/soc.c @@ -28,3 +28,11 @@ void reset_cpu(ulong addr) { writel(0x1, samsung_get_base_swreset()); } + +#ifndef CONFIG_SYS_DCACHE_OFF +void enable_caches(void) +{ + /* Enable D-cache. I-cache is already enabled in start.S */ + dcache_enable(); +} +#endif diff --git a/arch/arm/cpu/armv7/exynos/system.c b/arch/arm/cpu/armv7/exynos/system.c index 4426611d1b..8424c57e95 100644 --- a/arch/arm/cpu/armv7/exynos/system.c +++ b/arch/arm/cpu/armv7/exynos/system.c @@ -62,8 +62,26 @@ static void exynos4_set_system_display(void) writel(cfg, &sysreg->display_ctrl); } +static void exynos5_set_system_display(void) +{ + struct exynos5_sysreg *sysreg = + (struct exynos5_sysreg *)samsung_get_base_sysreg(); + unsigned int cfg = 0; + + /* + * system register path set + * 0: MIE/MDNIE + * 1: FIMD Bypass + */ + cfg = readl(&sysreg->disp1blk_cfg); + cfg |= (1 << 15); + writel(cfg, &sysreg->disp1blk_cfg); +} + void set_system_display_ctrl(void) { if (cpu_is_exynos4()) exynos4_set_system_display(); + else + exynos5_set_system_display(); } diff --git a/arch/arm/cpu/armv7/imx-common/Makefile b/arch/arm/cpu/armv7/imx-common/Makefile index bf36be5767..16fba8da93 100644 --- a/arch/arm/cpu/armv7/imx-common/Makefile +++ b/arch/arm/cpu/armv7/imx-common/Makefile @@ -29,6 +29,7 @@ LIB = $(obj)libimx-common.o COBJS-y = iomux-v3.o timer.o cpu.o speed.o COBJS-$(CONFIG_I2C_MXC) += i2c.o +COBJS-$(CONFIG_CMD_BMODE) += cmd_bmode.o COBJS := $(sort $(COBJS-y)) SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) diff --git a/arch/arm/cpu/armv7/imx-common/cmd_bmode.c b/arch/arm/cpu/armv7/imx-common/cmd_bmode.c new file mode 100644 index 0000000000..02fe72ed7f --- /dev/null +++ b/arch/arm/cpu/armv7/imx-common/cmd_bmode.c @@ -0,0 +1,119 @@ +/* + * Copyright (C) 2012 Boundary Devices Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> +#include <asm/errno.h> +#include <asm/io.h> +#include <asm/imx-common/boot_mode.h> +#include <malloc.h> + +static const struct boot_mode *modes[2]; + +static const struct boot_mode *search_modes(char *arg) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(modes); i++) { + const struct boot_mode *p = modes[i]; + if (p) { + while (p->name) { + if (!strcmp(p->name, arg)) + return p; + p++; + } + } + } + return NULL; +} + +static int create_usage(char *dest) +{ + int i; + int size = 0; + + for (i = 0; i < ARRAY_SIZE(modes); i++) { + const struct boot_mode *p = modes[i]; + if (p) { + while (p->name) { + int len = strlen(p->name); + if (dest) { + memcpy(dest, p->name, len); + dest += len; + *dest++ = '|'; + } + size += len + 1; + p++; + } + } + } + if (dest) + memcpy(dest - 1, " [noreset]", 11); /* include trailing 0 */ + size += 10; + return size; +} + +static int do_boot_mode(cmd_tbl_t *cmdtp, int flag, int argc, + char * const argv[]) +{ + const struct boot_mode *p; + int reset_requested = 1; + + if (argc < 2) + return CMD_RET_USAGE; + p = search_modes(argv[1]); + if (!p) + return CMD_RET_USAGE; + if (argc == 3) { + if (strcmp(argv[2], "noreset")) + return CMD_RET_USAGE; + reset_requested = 0; + } + + boot_mode_apply(p->cfg_val); + if (reset_requested && p->cfg_val) + do_reset(NULL, 0, 0, NULL); + return 0; +} + +U_BOOT_CMD( + bmode, 3, 0, do_boot_mode, + NULL, + ""); + +void add_board_boot_modes(const struct boot_mode *p) +{ + int size; + char *dest; + + if (__u_boot_cmd_bmode.usage) { + free(__u_boot_cmd_bmode.usage); + __u_boot_cmd_bmode.usage = NULL; + } + + modes[0] = p; + modes[1] = soc_boot_modes; + size = create_usage(NULL); + dest = malloc(size); + if (dest) { + create_usage(dest); + __u_boot_cmd_bmode.usage = dest; + } +} diff --git a/arch/arm/cpu/armv7/imx-common/cpu.c b/arch/arm/cpu/armv7/imx-common/cpu.c index b3195dd6fb..fa1d468041 100644 --- a/arch/arm/cpu/armv7/imx-common/cpu.c +++ b/arch/arm/cpu/armv7/imx-common/cpu.c @@ -66,7 +66,7 @@ char *get_reset_cause(void) #if defined(CONFIG_DISPLAY_CPUINFO) -static char *get_imx_type(u32 imxtype) +static const char *get_imx_type(u32 imxtype) { switch (imxtype) { case 0x63: @@ -80,7 +80,7 @@ static char *get_imx_type(u32 imxtype) case 0x53: return "53"; default: - return "unknown"; + return "??"; } } @@ -111,18 +111,16 @@ int cpu_eth_init(bd_t *bis) return rc; } +#ifdef CONFIG_FSL_ESDHC /* * Initializes on-chip MMC controllers. * to override, implement board_mmc_init() */ int cpu_mmc_init(bd_t *bis) { -#ifdef CONFIG_FSL_ESDHC return fsl_esdhc_mmc_init(bis); -#else - return 0; -#endif } +#endif void reset_cpu(ulong addr) { diff --git a/arch/arm/cpu/armv7/imx-common/timer.c b/arch/arm/cpu/armv7/imx-common/timer.c index 1645ff83f4..e2725e1a64 100644 --- a/arch/arm/cpu/armv7/imx-common/timer.c +++ b/arch/arm/cpu/armv7/imx-common/timer.c @@ -61,7 +61,7 @@ static inline unsigned long long tick_to_time(unsigned long long tick) static inline unsigned long long us_to_tick(unsigned long long usec) { - usec *= CLK_32KHZ; + usec = usec * CLK_32KHZ + 999999; do_div(usec, 1000000); return usec; diff --git a/arch/arm/cpu/armv7/lowlevel_init.S b/arch/arm/cpu/armv7/lowlevel_init.S new file mode 100644 index 0000000000..0d45528e99 --- /dev/null +++ b/arch/arm/cpu/armv7/lowlevel_init.S @@ -0,0 +1,51 @@ +/* + * A lowlevel_init function that sets up the stack to call a C function to + * perform further init. + * + * (C) Copyright 2010 + * Texas Instruments, <www.ti.com> + * + * Author : + * Aneesh V <aneesh@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <asm-offsets.h> +#include <config.h> +#include <linux/linkage.h> + +ENTRY(lowlevel_init) + /* + * Setup a temporary stack + */ + ldr sp, =CONFIG_SYS_INIT_SP_ADDR + bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ + + /* + * Save the old lr(passed in ip) and the current lr to stack + */ + push {ip, lr} + + /* + * go setup pll, mux, memory + */ + bl s_init + pop {ip, pc} +ENDPROC(lowlevel_init) diff --git a/arch/arm/cpu/armv7/mx5/lowlevel_init.S b/arch/arm/cpu/armv7/mx5/lowlevel_init.S index 683a7b53af..a40b84feeb 100644 --- a/arch/arm/cpu/armv7/mx5/lowlevel_init.S +++ b/arch/arm/cpu/armv7/mx5/lowlevel_init.S @@ -36,9 +36,9 @@ /* reconfigure L2 cache aux control reg */ mov r0, #0xC0 /* tag RAM */ add r0, r0, #0x4 /* data RAM */ - orr r0, r0, #(1 << 24) /* disable write allocate delay */ - orr r0, r0, #(1 << 23) /* disable write allocate combine */ - orr r0, r0, #(1 << 22) /* disable write allocate */ + orr r0, r0, #1 << 24 /* disable write allocate delay */ + orr r0, r0, #1 << 23 /* disable write allocate combine */ + orr r0, r0, #1 << 22 /* disable write allocate */ #if defined(CONFIG_MX51) ldr r1, =0x0 @@ -46,7 +46,7 @@ cmp r3, #0x10 /* disable write combine for TO 2 and lower revs */ - orrls r0, r0, #(1 << 25) + orrls r0, r0, #1 << 25 #endif mcr 15, 1, r0, c9, c0, 2 @@ -247,9 +247,9 @@ movhi r1, #0 #else mov r1, #0 - #endif str r1, [r0, #CLKCTL_CACRR] + /* Switch ARM back to PLL 1 */ mov r1, #0 str r1, [r0, #CLKCTL_CCSR] @@ -288,9 +288,9 @@ /* Switch peripheral to PLL2 */ ldr r0, =CCM_BASE_ADDR ldr r1, =0x00808145 - orr r1, r1, #(2 << 10) - orr r1, r1, #(0 << 16) - orr r1, r1, #(1 << 19) + orr r1, r1, #2 << 10 + orr r1, r1, #0 << 16 + orr r1, r1, #1 << 19 str r1, [r0, #CLKCTL_CBCDR] ldr r1, =0x00016154 @@ -331,10 +331,10 @@ ENTRY(lowlevel_init) #if defined(CONFIG_MX51) ldr r0, =GPIO1_BASE_ADDR ldr r1, [r0, #0x0] - orr r1, r1, #(1 << 23) + orr r1, r1, #1 << 23 str r1, [r0, #0x0] ldr r1, [r0, #0x4] - orr r1, r1, #(1 << 23) + orr r1, r1, #1 << 23 str r1, [r0, #0x4] #endif @@ -351,16 +351,16 @@ ENTRY(lowlevel_init) ENDPROC(lowlevel_init) /* Board level setting value */ -W_DP_OP_864: .word DP_OP_864 -W_DP_MFD_864: .word DP_MFD_864 -W_DP_MFN_864: .word DP_MFN_864 -W_DP_MFN_800_DIT: .word DP_MFN_800_DIT -W_DP_OP_800: .word DP_OP_800 -W_DP_MFD_800: .word DP_MFD_800 -W_DP_MFN_800: .word DP_MFN_800 -W_DP_OP_665: .word DP_OP_665 -W_DP_MFD_665: .word DP_MFD_665 -W_DP_MFN_665: .word DP_MFN_665 -W_DP_OP_216: .word DP_OP_216 -W_DP_MFD_216: .word DP_MFD_216 -W_DP_MFN_216: .word DP_MFN_216 +W_DP_OP_864: .word DP_OP_864 +W_DP_MFD_864: .word DP_MFD_864 +W_DP_MFN_864: .word DP_MFN_864 +W_DP_MFN_800_DIT: .word DP_MFN_800_DIT +W_DP_OP_800: .word DP_OP_800 +W_DP_MFD_800: .word DP_MFD_800 +W_DP_MFN_800: .word DP_MFN_800 +W_DP_OP_665: .word DP_OP_665 +W_DP_MFD_665: .word DP_MFD_665 +W_DP_MFN_665: .word DP_MFN_665 +W_DP_OP_216: .word DP_OP_216 +W_DP_MFD_216: .word DP_MFD_216 +W_DP_MFN_216: .word DP_MFN_216 diff --git a/arch/arm/cpu/armv7/mx5/soc.c b/arch/arm/cpu/armv7/mx5/soc.c index 3f5a4f726c..263658aa4b 100644 --- a/arch/arm/cpu/armv7/mx5/soc.c +++ b/arch/arm/cpu/armv7/mx5/soc.c @@ -30,6 +30,7 @@ #include <asm/errno.h> #include <asm/io.h> +#include <asm/imx-common/boot_mode.h> #if !(defined(CONFIG_MX51) || defined(CONFIG_MX53)) #error "CPU_TYPE not defined" @@ -71,6 +72,14 @@ u32 get_cpu_rev(void) return system_rev; } +#ifndef CONFIG_SYS_DCACHE_OFF +void enable_caches(void) +{ + /* Enable D-cache. I-cache is already enabled in start.S */ + dcache_enable(); +} +#endif + #if defined(CONFIG_FEC_MXC) void imx_get_mac_from_fuse(int dev_id, unsigned char *mac) { @@ -115,3 +124,33 @@ void set_chipselect_size(int const cs_size) writel(reg, &iomuxc_regs->gpr1); } + +#ifdef CONFIG_MX53 +void boot_mode_apply(unsigned cfg_val) +{ + writel(cfg_val, &((struct srtc_regs *)SRTC_BASE_ADDR)->lpgr); +} +/* + * cfg_val will be used for + * Boot_cfg3[7:0]:Boot_cfg2[7:0]:Boot_cfg1[7:0] + * + * If bit 28 of LPGR is set upon watchdog reset, + * bits[25:0] of LPGR will move to SBMR. + */ +const struct boot_mode soc_boot_modes[] = { + {"normal", MAKE_CFGVAL(0x00, 0x00, 0x00, 0x00)}, + /* usb or serial download */ + {"usb", MAKE_CFGVAL(0x00, 0x00, 0x00, 0x13)}, + {"sata", MAKE_CFGVAL(0x28, 0x00, 0x00, 0x12)}, + {"escpi1:0", MAKE_CFGVAL(0x38, 0x20, 0x00, 0x12)}, + {"escpi1:1", MAKE_CFGVAL(0x38, 0x20, 0x04, 0x12)}, + {"escpi1:2", MAKE_CFGVAL(0x38, 0x20, 0x08, 0x12)}, + {"escpi1:3", MAKE_CFGVAL(0x38, 0x20, 0x0c, 0x12)}, + /* 4 bit bus width */ + {"esdhc1", MAKE_CFGVAL(0x40, 0x20, 0x00, 0x12)}, + {"esdhc2", MAKE_CFGVAL(0x40, 0x20, 0x08, 0x12)}, + {"esdhc3", MAKE_CFGVAL(0x40, 0x20, 0x10, 0x12)}, + {"esdhc4", MAKE_CFGVAL(0x40, 0x20, 0x18, 0x12)}, + {NULL, 0}, +}; +#endif diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c index 84b458c7eb..7380ffe46c 100644 --- a/arch/arm/cpu/armv7/mx6/soc.c +++ b/arch/arm/cpu/armv7/mx6/soc.c @@ -29,6 +29,7 @@ #include <asm/arch/imx-regs.h> #include <asm/arch/clock.h> #include <asm/arch/sys_proto.h> +#include <asm/imx-common/boot_mode.h> u32 get_cpu_rev(void) { @@ -141,3 +142,38 @@ void imx_get_mac_from_fuse(int dev_id, unsigned char *mac) } #endif + +void boot_mode_apply(unsigned cfg_val) +{ + unsigned reg; + struct src_regs *psrc = (struct src_regs *)SRC_BASE_ADDR; + writel(cfg_val, &psrc->gpr9); + reg = readl(&psrc->gpr10); + if (cfg_val) + reg |= 1 << 28; + else + reg &= ~(1 << 28); + writel(reg, &psrc->gpr10); +} +/* + * cfg_val will be used for + * Boot_cfg4[7:0]:Boot_cfg3[7:0]:Boot_cfg2[7:0]:Boot_cfg1[7:0] + * After reset, if GPR10[28] is 1, ROM will copy GPR9[25:0] + * to SBMR1, which will determine the boot device. + */ +const struct boot_mode soc_boot_modes[] = { + {"normal", MAKE_CFGVAL(0x00, 0x00, 0x00, 0x00)}, + /* reserved value should start rom usb */ + {"usb", MAKE_CFGVAL(0x01, 0x00, 0x00, 0x00)}, + {"sata", MAKE_CFGVAL(0x20, 0x00, 0x00, 0x00)}, + {"escpi1:0", MAKE_CFGVAL(0x30, 0x00, 0x00, 0x08)}, + {"escpi1:1", MAKE_CFGVAL(0x30, 0x00, 0x00, 0x18)}, + {"escpi1:2", MAKE_CFGVAL(0x30, 0x00, 0x00, 0x28)}, + {"escpi1:3", MAKE_CFGVAL(0x30, 0x00, 0x00, 0x38)}, + /* 4 bit bus width */ + {"esdhc1", MAKE_CFGVAL(0x40, 0x20, 0x00, 0x00)}, + {"esdhc2", MAKE_CFGVAL(0x40, 0x28, 0x00, 0x00)}, + {"esdhc3", MAKE_CFGVAL(0x40, 0x30, 0x00, 0x00)}, + {"esdhc4", MAKE_CFGVAL(0x40, 0x38, 0x00, 0x00)}, + {NULL, 0}, +}; diff --git a/arch/arm/cpu/armv7/omap-common/Makefile b/arch/arm/cpu/armv7/omap-common/Makefile index 2a6625f1c4..d37b22d98a 100644 --- a/arch/arm/cpu/armv7/omap-common/Makefile +++ b/arch/arm/cpu/armv7/omap-common/Makefile @@ -29,9 +29,6 @@ SOBJS := reset.o COBJS := timer.o COBJS += utils.o -ifdef CONFIG_OMAP -COBJS += gpio.o -endif ifneq ($(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX),) COBJS += hwinit-common.o diff --git a/arch/arm/cpu/armv7/omap-common/gpio.c b/arch/arm/cpu/armv7/omap-common/gpio.c deleted file mode 100644 index fc89f2a42b..0000000000 --- a/arch/arm/cpu/armv7/omap-common/gpio.c +++ /dev/null @@ -1,243 +0,0 @@ -/* - * Copyright (c) 2009 Wind River Systems, Inc. - * Tom Rix <Tom.Rix@windriver.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - * This work is derived from the linux 2.6.27 kernel source - * To fetch, use the kernel repository - * git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git - * Use the v2.6.27 tag. - * - * Below is the original's header including its copyright - * - * linux/arch/arm/plat-omap/gpio.c - * - * Support functions for OMAP GPIO - * - * Copyright (C) 2003-2005 Nokia Corporation - * Written by Juha Yrjölä <juha.yrjola@nokia.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <common.h> -#include <asm/gpio.h> -#include <asm/io.h> -#include <asm/errno.h> - -#define OMAP_GPIO_DIR_OUT 0 -#define OMAP_GPIO_DIR_IN 1 - -static inline const struct gpio_bank *get_gpio_bank(int gpio) -{ - return &omap_gpio_bank[gpio >> 5]; -} - -static inline int get_gpio_index(int gpio) -{ - return gpio & 0x1f; -} - -static inline int gpio_valid(int gpio) -{ - if (gpio < 0) - return -1; - if (gpio < 192) - return 0; - return -1; -} - -static int check_gpio(int gpio) -{ - if (gpio_valid(gpio) < 0) { - printf("ERROR : check_gpio: invalid GPIO %d\n", gpio); - return -1; - } - return 0; -} - -static void _set_gpio_direction(const struct gpio_bank *bank, int gpio, - int is_input) -{ - void *reg = bank->base; - u32 l; - - switch (bank->method) { - case METHOD_GPIO_24XX: - reg += OMAP_GPIO_OE; - break; - default: - return; - } - l = __raw_readl(reg); - if (is_input) - l |= 1 << gpio; - else - l &= ~(1 << gpio); - __raw_writel(l, reg); -} - -/** - * Get the direction of the GPIO by reading the GPIO_OE register - * corresponding to the specified bank. - */ -static int _get_gpio_direction(const struct gpio_bank *bank, int gpio) -{ - void *reg = bank->base; - u32 v; - - switch (bank->method) { - case METHOD_GPIO_24XX: - reg += OMAP_GPIO_OE; - break; - default: - return -1; - } - - v = __raw_readl(reg); - - if (v & (1 << gpio)) - return OMAP_GPIO_DIR_IN; - else - return OMAP_GPIO_DIR_OUT; -} - -static void _set_gpio_dataout(const struct gpio_bank *bank, int gpio, - int enable) -{ - void *reg = bank->base; - u32 l = 0; - - switch (bank->method) { - case METHOD_GPIO_24XX: - if (enable) - reg += OMAP_GPIO_SETDATAOUT; - else - reg += OMAP_GPIO_CLEARDATAOUT; - l = 1 << gpio; - break; - default: - printf("omap3-gpio unknown bank method %s %d\n", - __FILE__, __LINE__); - return; - } - __raw_writel(l, reg); -} - -/** - * Set value of the specified gpio - */ -int gpio_set_value(unsigned gpio, int value) -{ - const struct gpio_bank *bank; - - if (check_gpio(gpio) < 0) - return -1; - bank = get_gpio_bank(gpio); - _set_gpio_dataout(bank, get_gpio_index(gpio), value); - - return 0; -} - -/** - * Get value of the specified gpio - */ -int gpio_get_value(unsigned gpio) -{ - const struct gpio_bank *bank; - void *reg; - int input; - - if (check_gpio(gpio) < 0) - return -1; - bank = get_gpio_bank(gpio); - reg = bank->base; - switch (bank->method) { - case METHOD_GPIO_24XX: - input = _get_gpio_direction(bank, get_gpio_index(gpio)); - switch (input) { - case OMAP_GPIO_DIR_IN: - reg += OMAP_GPIO_DATAIN; - break; - case OMAP_GPIO_DIR_OUT: - reg += OMAP_GPIO_DATAOUT; - break; - default: - return -1; - } - break; - default: - return -1; - } - return (__raw_readl(reg) - & (1 << get_gpio_index(gpio))) != 0; -} - -/** - * Set gpio direction as input - */ -int gpio_direction_input(unsigned gpio) -{ - const struct gpio_bank *bank; - - if (check_gpio(gpio) < 0) - return -1; - - bank = get_gpio_bank(gpio); - _set_gpio_direction(bank, get_gpio_index(gpio), 1); - - return 0; -} - -/** - * Set gpio direction as output - */ -int gpio_direction_output(unsigned gpio, int value) -{ - const struct gpio_bank *bank; - - if (check_gpio(gpio) < 0) - return -1; - - bank = get_gpio_bank(gpio); - _set_gpio_dataout(bank, get_gpio_index(gpio), value); - _set_gpio_direction(bank, get_gpio_index(gpio), 0); - - return 0; -} - -/** - * Request a gpio before using it. - * - * NOTE: Argument 'label' is unused. - */ -int gpio_request(unsigned gpio, const char *label) -{ - if (check_gpio(gpio) < 0) - return -1; - - return 0; -} - -/** - * Reset and free the gpio after using it. - */ -int gpio_free(unsigned gpio) -{ - return 0; -} diff --git a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S index ccc6bb6b85..1ece073630 100644 --- a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S +++ b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S @@ -78,24 +78,6 @@ ENTRY(save_boot_params) bx lr ENDPROC(save_boot_params) -ENTRY(lowlevel_init) - /* - * Setup a temporary stack - */ - ldr sp, =LOW_LEVEL_SRAM_STACK - - /* - * Save the old lr(passed in ip) and the current lr to stack - */ - push {ip, lr} - - /* - * go setup pll, mux, memory - */ - bl s_init - pop {ip, pc} -ENDPROC(lowlevel_init) - ENTRY(set_pl310_ctrl_reg) PUSH {r4-r11, lr} @ save registers - ROM code may pollute @ our registers diff --git a/arch/arm/cpu/armv7/s5p-common/pwm.c b/arch/arm/cpu/armv7/s5p-common/pwm.c index 58d279e003..44d7bc360e 100644 --- a/arch/arm/cpu/armv7/s5p-common/pwm.c +++ b/arch/arm/cpu/armv7/s5p-common/pwm.c @@ -170,7 +170,7 @@ int pwm_init(int pwm_id, int div, int invert) timer_rate_hz = get_pwm_clk() / ((prescaler + 1) * (div + 1)); - timer_rate_hz = timer_rate_hz / 100; + timer_rate_hz = timer_rate_hz / CONFIG_SYS_HZ; /* set count value */ offset = pwm_id * 3; diff --git a/arch/arm/cpu/armv7/s5p-common/timer.c b/arch/arm/cpu/armv7/s5p-common/timer.c index 359c21f5e0..bb0e795e66 100644 --- a/arch/arm/cpu/armv7/s5p-common/timer.c +++ b/arch/arm/cpu/armv7/s5p-common/timer.c @@ -31,6 +31,8 @@ DECLARE_GLOBAL_DATA_PTR; +unsigned long get_current_tick(void); + /* macro to read the 16 bit timer */ static inline struct s5p_timer *s5p_get_base_timer(void) { @@ -44,6 +46,8 @@ int timer_init(void) pwm_config(4, 0, 0); pwm_enable(4); + reset_timer_masked(); + return 0; } @@ -72,16 +76,16 @@ void __udelay(unsigned long usec) * 3. finish normalize. */ tmo = usec / 1000; - tmo *= (CONFIG_SYS_HZ * count_value / 10); + tmo *= (CONFIG_SYS_HZ * count_value); tmo /= 1000; } else { /* else small number, don't kill it prior to HZ multiply */ - tmo = usec * CONFIG_SYS_HZ * count_value / 10; + tmo = usec * CONFIG_SYS_HZ * count_value; tmo /= (1000 * 1000); } /* get current timestamp */ - tmp = get_timer(0); + tmp = get_current_tick(); /* if setting this fordward will roll time stamp */ /* reset "advancing" timestamp to 0, set lastinc value */ @@ -92,7 +96,7 @@ void __udelay(unsigned long usec) tmo += tmp; /* loop till event */ - while (get_timer_masked() < tmo) + while (get_current_tick() < tmo) ; /* nop */ } @@ -108,6 +112,14 @@ void reset_timer_masked(void) unsigned long get_timer_masked(void) { struct s5p_timer *const timer = s5p_get_base_timer(); + unsigned long count_value = readl(&timer->tcntb4); + + return get_current_tick() / count_value; +} + +unsigned long get_current_tick(void) +{ + struct s5p_timer *const timer = s5p_get_base_timer(); unsigned long now = readl(&timer->tcnto4); unsigned long count_value = readl(&timer->tcntb4); diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S index aee27fdc4d..32658eb7a5 100644 --- a/arch/arm/cpu/armv7/start.S +++ b/arch/arm/cpu/armv7/start.S @@ -133,7 +133,6 @@ reset: orr r0, r0, #0xd3 msr cpsr,r0 -#if !defined(CONFIG_TEGRA2) /* * Setup vector: * (OMAP4 spl TEXT_BASE is not 32 byte aligned. @@ -149,7 +148,6 @@ reset: ldr r0, =_start mcr p15, 0, r0, c12, c0, 0 @Set VBAR #endif -#endif /* !Tegra2 */ /* the mask ROM code should have PLL and others stable */ #ifndef CONFIG_SKIP_LOWLEVEL_INIT @@ -282,14 +280,14 @@ jump_2_ram: /* * Move vector table */ -#if !defined(CONFIG_TEGRA2) +#if !defined(CONFIG_TEGRA20) #if !(defined(CONFIG_OMAP44XX) && defined(CONFIG_SPL_BUILD)) /* Set vector address in CP15 VBAR register */ ldr r0, =_start add r0, r0, r9 mcr p15, 0, r0, c12, c0, 0 @Set VBAR #endif -#endif /* !Tegra2 */ +#endif /* !Tegra20 */ ldr r0, _board_init_r_ofs adr r1, _start @@ -307,6 +305,20 @@ ENDPROC(relocate_code) /************************************************************************* * + * void save_boot_params(u32 r0, u32 r1, u32 r2, u32 r3) + * __attribute__((weak)); + * + * Stack pointer is not yet initialized at this moment + * Don't save anything to stack even if compiled with -O0 + * + *************************************************************************/ +ENTRY(save_boot_params) + bx lr @ back to my caller +ENDPROC(save_boot_params) + .weak save_boot_params + +/************************************************************************* + * * cpu_init_cp15 * * Setup CP15 registers (cache, MMU, TLBs). The I-cache is turned on unless diff --git a/arch/arm/cpu/armv7/tegra2/Makefile b/arch/arm/cpu/armv7/tegra20/Makefile index 80da4536d3..5f4035d79c 100644 --- a/arch/arm/cpu/armv7/tegra2/Makefile +++ b/arch/arm/cpu/armv7/tegra20/Makefile @@ -23,27 +23,16 @@ # MA 02111-1307 USA # -# The AVP is ARMv4T architecture so we must use special compiler -# flags for any startup files it might use. -CFLAGS_arch/arm/cpu/armv7/tegra2/ap20.o += -march=armv4t -CFLAGS_arch/arm/cpu/armv7/tegra2/clock.o += -march=armv4t -CFLAGS_arch/arm/cpu/armv7/tegra2/warmboot_avp.o += -march=armv4t - include $(TOPDIR)/config.mk LIB = $(obj)lib$(SOC).o -SOBJS := lowlevel_init.o -COBJS-y := ap20.o board.o clock.o funcmux.o pinmux.o sys_info.o timer.o -COBJS-$(CONFIG_TEGRA_CLOCK_SCALING) += emc.o -COBJS-$(CONFIG_TEGRA_PMU) += pmu.o COBJS-$(CONFIG_USB_EHCI_TEGRA) += usb.o -COBJS-$(CONFIG_TEGRA2_LP0) += crypto.o warmboot.o warmboot_avp.o COBJS-$(CONFIG_CMD_ENTERRCM) += cmd_enterrcm.o COBJS := $(COBJS-y) -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS)) +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) all: $(obj).depend $(LIB) diff --git a/arch/arm/cpu/armv7/tegra2/cmd_enterrcm.c b/arch/arm/cpu/armv7/tegra20/cmd_enterrcm.c index 2fcd107df5..75cadb03ec 100644 --- a/arch/arm/cpu/armv7/tegra2/cmd_enterrcm.c +++ b/arch/arm/cpu/armv7/tegra20/cmd_enterrcm.c @@ -40,13 +40,13 @@ */ #include <common.h> -#include <asm/arch/tegra2.h> +#include <asm/arch/tegra20.h> #include <asm/arch/pmc.h> static int do_enterrcm(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - struct pmc_ctlr *pmc = (struct pmc_ctlr *)TEGRA2_PMC_BASE; + struct pmc_ctlr *pmc = (struct pmc_ctlr *)TEGRA20_PMC_BASE; puts("Entering RCM...\n"); udelay(50000); diff --git a/arch/arm/cpu/armv7/tegra2/config.mk b/arch/arm/cpu/armv7/tegra20/config.mk index 4dd8cb8442..6432e754e8 100644 --- a/arch/arm/cpu/armv7/tegra2/config.mk +++ b/arch/arm/cpu/armv7/tegra20/config.mk @@ -23,16 +23,4 @@ # Foundation, Inc., 59 Temple Place, Suite 330, Boston, # MA 02111-1307 USA # - -# Tegra has an ARMv4T CPU which runs board_init_f(), so we must build these -# files with compatible flags -ifdef CONFIG_TEGRA2 -CFLAGS_arch/arm/lib/board.o += -march=armv4t -CFLAGS_arch/arm/lib/memset.o += -march=armv4t -CFLAGS_lib/string.o += -march=armv4t -CFLAGS_common/cmd_nvedit.o += -march=armv4t -endif - -USE_PRIVATE_LIBGCC = yes - CONFIG_ARCH_DEVICE_TREE := tegra20 diff --git a/arch/arm/cpu/armv7/tegra2/usb.c b/arch/arm/cpu/armv7/tegra20/usb.c index 5f2b243750..178bb130c2 100644 --- a/arch/arm/cpu/armv7/tegra2/usb.c +++ b/arch/arm/cpu/armv7/tegra20/usb.c @@ -24,7 +24,7 @@ #include <common.h> #include <asm/io.h> #include <asm-generic/gpio.h> -#include <asm/arch/tegra2.h> +#include <asm/arch/tegra20.h> #include <asm/arch/clk_rst.h> #include <asm/arch/clock.h> #include <asm/arch/gpio.h> diff --git a/arch/arm/cpu/armv7/u8500/Makefile b/arch/arm/cpu/armv7/u8500/Makefile index 270aa40c88..ce8af96038 100644 --- a/arch/arm/cpu/armv7/u8500/Makefile +++ b/arch/arm/cpu/armv7/u8500/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(SOC).o -COBJS = timer.o clock.o +COBJS = timer.o clock.o prcmu.o cpu.o SOBJS = lowlevel.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) diff --git a/arch/arm/cpu/armv7/u8500/clock.c b/arch/arm/cpu/armv7/u8500/clock.c index 9e3b87394d..fcfd61a1f4 100644 --- a/arch/arm/cpu/armv7/u8500/clock.c +++ b/arch/arm/cpu/armv7/u8500/clock.c @@ -54,3 +54,37 @@ void u8500_clock_enable(int periph, int cluster, int kern) if (cluster != -1) writel(1 << cluster, &clkrst->pcken); } + +void db8500_clocks_init(void) +{ + /* + * Enable all clocks. This is u-boot, we can enable it all. There is no + * powersave in u-boot. + */ + + u8500_clock_enable(1, 9, -1); /* GPIO0 */ + u8500_clock_enable(2, 11, -1);/* GPIO1 */ + u8500_clock_enable(3, 8, -1); /* GPIO2 */ + u8500_clock_enable(5, 1, -1); /* GPIO3 */ + u8500_clock_enable(3, 6, 6); /* UART2 */ + u8500_clock_enable(3, 3, 3); /* I2C0 */ + u8500_clock_enable(1, 5, 5); /* SDI0 */ + u8500_clock_enable(2, 4, 2); /* SDI4 */ + u8500_clock_enable(6, 6, -1); /* MTU0 */ + u8500_clock_enable(3, 4, 4); /* SDI2 */ + + /* + * Enabling clocks for all devices which are AMBA devices in the + * kernel. Otherwise they will not get probe()'d because the + * peripheral ID register will not be powered. + */ + + /* XXX: some of these differ between ED/V1 */ + + u8500_clock_enable(1, 1, 1); /* UART1 */ + u8500_clock_enable(1, 0, 0); /* UART0 */ + u8500_clock_enable(3, 2, 2); /* SSP1 */ + u8500_clock_enable(3, 1, 1); /* SSP0 */ + u8500_clock_enable(2, 8, -1); /* SPI0 */ + u8500_clock_enable(2, 5, 3); /* MSP2 */ +} diff --git a/arch/arm/cpu/armv7/u8500/cpu.c b/arch/arm/cpu/armv7/u8500/cpu.c new file mode 100644 index 0000000000..6f95c30673 --- /dev/null +++ b/arch/arm/cpu/armv7/u8500/cpu.c @@ -0,0 +1,192 @@ +/* + * Copyright (C) 2012 Linaro Limited + * Mathieu Poirier <mathieu.poirier@linaro.org> + * + * Based on original code from Joakim Axelsson at ST-Ericsson + * (C) Copyright 2010 ST-Ericsson + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/prcmu.h> +#include <asm/arch/clock.h> +#include <asm/arch/hardware.h> + +#include <asm/arch/hardware.h> + +#define CPUID_DB8500V1 0x411fc091 +#define CPUID_DB8500V2 0x412fc091 +#define ASICID_DB8500V11 0x008500A1 + +#define CACHE_CONTR_BASE 0xA0412000 +/* Cache controller register offsets + * as found in ARM's technical reference manual + */ +#define CACHE_INVAL_BY_WAY (CACHE_CONTR_BASE + 0x77C) +#define CACHE_LOCKDOWN_BY_D (CACHE_CONTR_BASE + 0X900) +#define CACHE_LOCKDOWN_BY_I (CACHE_CONTR_BASE + 0X904) + +static unsigned int read_asicid(void); + +static inline unsigned int read_cpuid(void) +{ + unsigned int val; + + /* Main ID register (MIDR) */ + asm("mrc p15, 0, %0, c0, c0, 0" + : "=r" (val) + : + : "cc"); + + return val; +} + +static int cpu_is_u8500v11(void) +{ + return read_asicid() == ASICID_DB8500V11; +} + +static int cpu_is_u8500v2(void) +{ + return read_cpuid() == CPUID_DB8500V2; +} + +static unsigned int read_asicid(void) +{ + unsigned int *address; + + if (cpu_is_u8500v2()) + address = (void *) U8500_ASIC_ID_LOC_V2; + else + address = (void *) U8500_ASIC_ID_LOC_ED_V1; + + return readl(address); +} + +void cpu_cache_initialization(void) +{ + unsigned int value; + /* invalidate all cache entries */ + writel(0xFFFF, CACHE_INVAL_BY_WAY); + + /* ways are set to '0' when they are totally + * cleaned and invalidated + */ + do { + value = readl(CACHE_INVAL_BY_WAY); + } while (value & 0xFF); + + /* Invalidate register 9 D and I lockdown */ + writel(0xFF, CACHE_LOCKDOWN_BY_D); + writel(0xFF, CACHE_LOCKDOWN_BY_I); +} + +#ifdef CONFIG_ARCH_CPU_INIT +/* + * SOC specific cpu init + */ +int arch_cpu_init(void) +{ + db8500_prcmu_init(); + db8500_clocks_init(); + + return 0; +} +#endif /* CONFIG_ARCH_CPU_INIT */ + +#ifdef CONFIG_MMC + +int u8500_mmc_power_init(void) +{ + int ret; + int enable, voltage; + int ab8500_revision; + + if (!cpu_is_u8500v11() && !cpu_is_u8500v2()) + return 0; + + /* Get AB8500 revision */ + ret = ab8500_read(AB8500_MISC, AB8500_REV_REG); + if (ret < 0) + goto out; + + ab8500_revision = ret; + + /* + * On v1.1 HREF boards (HREF+), Vaux3 needs to be enabled for the SD + * card to work. This is done by enabling the regulators in the AB8500 + * via PRCMU I2C transactions. + * + * This code is derived from the handling of AB8500_LDO_VAUX3 in + * ab8500_ldo_enable() and ab8500_ldo_disable() in Linux. + * + * Turn off and delay is required to have it work across soft reboots. + */ + + /* Turn off (read-modify-write) */ + ret = ab8500_read(AB8500_REGU_CTRL2, + AB8500_REGU_VRF1VAUX3_REGU_REG); + if (ret < 0) + goto out; + + enable = ret; + + /* Turn off */ + ret = ab8500_write(AB8500_REGU_CTRL2, + AB8500_REGU_VRF1VAUX3_REGU_REG, + enable & ~LDO_VAUX3_ENABLE_MASK); + if (ret < 0) + goto out; + + udelay(10 * 1000); + + /* Set the voltage to 2.91 V or 2.9 V without overriding VRF1 value */ + ret = ab8500_read(AB8500_REGU_CTRL2, + AB8500_REGU_VRF1VAUX3_SEL_REG); + if (ret < 0) + goto out; + + voltage = ret; + + if (ab8500_revision < 0x20) { + voltage &= ~LDO_VAUX3_SEL_MASK; + voltage |= LDO_VAUX3_SEL_2V9; + } else { + voltage &= ~LDO_VAUX3_V2_SEL_MASK; + voltage |= LDO_VAUX3_V2_SEL_2V91; + } + + ret = ab8500_write(AB8500_REGU_CTRL2, + AB8500_REGU_VRF1VAUX3_SEL_REG, voltage); + if (ret < 0) + goto out; + + /* Turn on the supply */ + enable &= ~LDO_VAUX3_ENABLE_MASK; + enable |= LDO_VAUX3_ENABLE_VAL; + + ret = ab8500_write(AB8500_REGU_CTRL2, + AB8500_REGU_VRF1VAUX3_REGU_REG, enable); + +out: + return ret; +} +#endif /* CONFIG_MMC */ diff --git a/arch/arm/cpu/armv7/u8500/prcmu.c b/arch/arm/cpu/armv7/u8500/prcmu.c new file mode 100644 index 0000000000..934428fb89 --- /dev/null +++ b/arch/arm/cpu/armv7/u8500/prcmu.c @@ -0,0 +1,229 @@ +/* + * Copyright (C) 2009 ST-Ericsson SA + * + * Adapted from the Linux version: + * Author: Kumar Sanghvi <kumar.sanghvi@stericsson.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + */ + +/* + * NOTE: This currently does not support the I2C workaround access method. + */ + +#include <common.h> +#include <config.h> +#include <asm/io.h> +#include <asm/arch/hardware.h> +#include <asm/types.h> +#include <asm/io.h> +#include <asm/errno.h> +#include <asm/arch/prcmu.h> + +/* CPU mailbox registers */ +#define PRCMU_I2C_WRITE(slave) \ + (((slave) << 1) | I2CWRITE | (1 << 6)) +#define PRCMU_I2C_READ(slave) \ + (((slave) << 1) | I2CREAD | (1 << 6)) + +#define I2C_MBOX_BIT (1 << 5) + +static int prcmu_is_ready(void) +{ + int ready = readb(PRCM_XP70_CUR_PWR_STATE) == AP_EXECUTE; + if (!ready) + printf("PRCMU firmware not ready\n"); + return ready; +} + +static int wait_for_i2c_mbx_rdy(void) +{ + int timeout = 10000; + + if (readl(PRCM_ARM_IT1_VAL) & I2C_MBOX_BIT) { + printf("prcmu: warning i2c mailbox was not acked\n"); + /* clear mailbox 5 ack irq */ + writel(I2C_MBOX_BIT, PRCM_ARM_IT1_CLEAR); + } + + /* check any already on-going transaction */ + while ((readl(PRCM_MBOX_CPU_VAL) & I2C_MBOX_BIT) && timeout) + timeout--; + + if (timeout == 0) + return -1; + + return 0; +} + +static int wait_for_i2c_req_done(void) +{ + int timeout = 10000; + + /* Set an interrupt to XP70 */ + writel(I2C_MBOX_BIT, PRCM_MBOX_CPU_SET); + + /* wait for mailbox 5 (i2c) ack */ + while (!(readl(PRCM_ARM_IT1_VAL) & I2C_MBOX_BIT) && timeout) + timeout--; + + if (timeout == 0) + return -1; + + return 0; +} + +/** + * prcmu_i2c_read - PRCMU - 4500 communication using PRCMU I2C + * @reg: - db8500 register bank to be accessed + * @slave: - db8500 register to be accessed + * Returns: ACK_MB5 value containing the status + */ +int prcmu_i2c_read(u8 reg, u16 slave) +{ + uint8_t i2c_status; + uint8_t i2c_val; + int ret; + + if (!prcmu_is_ready()) + return -1; + + debug("\nprcmu_4500_i2c_read:bank=%x;reg=%x;\n", + reg, slave); + + ret = wait_for_i2c_mbx_rdy(); + if (ret) { + printf("prcmu_i2c_read: mailbox became not ready\n"); + return ret; + } + + /* prepare the data for mailbox 5 */ + writeb(PRCMU_I2C_READ(reg), PRCM_REQ_MB5_I2COPTYPE_REG); + writeb((1 << 3) | 0x0, PRCM_REQ_MB5_BIT_FIELDS); + writeb(slave, PRCM_REQ_MB5_I2CSLAVE); + writeb(0, PRCM_REQ_MB5_I2CVAL); + + ret = wait_for_i2c_req_done(); + if (ret) { + printf("prcmu_i2c_read: mailbox request timed out\n"); + return ret; + } + + /* retrieve values */ + debug("ack-mb5:transfer status = %x\n", + readb(PRCM_ACK_MB5_STATUS)); + debug("ack-mb5:reg bank = %x\n", readb(PRCM_ACK_MB5) >> 1); + debug("ack-mb5:slave_add = %x\n", + readb(PRCM_ACK_MB5_SLAVE)); + debug("ack-mb5:reg_val = %d\n", readb(PRCM_ACK_MB5_VAL)); + + i2c_status = readb(PRCM_ACK_MB5_STATUS); + i2c_val = readb(PRCM_ACK_MB5_VAL); + /* clear mailbox 5 ack irq */ + writel(I2C_MBOX_BIT, PRCM_ARM_IT1_CLEAR); + + if (i2c_status == I2C_RD_OK) + return i2c_val; + + printf("prcmu_i2c_read:read return status= %d\n", i2c_status); + return -1; +} + +/** + * prcmu_i2c_write - PRCMU-db8500 communication using PRCMU I2C + * @reg: - db8500 register bank to be accessed + * @slave: - db800 register to be written to + * @reg_data: - the data to write + * Returns: ACK_MB5 value containing the status + */ +int prcmu_i2c_write(u8 reg, u16 slave, u8 reg_data) +{ + uint8_t i2c_status; + int ret; + + if (!prcmu_is_ready()) + return -1; + + debug("\nprcmu_4500_i2c_write:bank=%x;reg=%x;\n", + reg, slave); + + ret = wait_for_i2c_mbx_rdy(); + if (ret) { + printf("prcmu_i2c_write: mailbox became not ready\n"); + return ret; + } + + /* prepare the data for mailbox 5 */ + writeb(PRCMU_I2C_WRITE(reg), PRCM_REQ_MB5_I2COPTYPE_REG); + writeb((1 << 3) | 0x0, PRCM_REQ_MB5_BIT_FIELDS); + writeb(slave, PRCM_REQ_MB5_I2CSLAVE); + writeb(reg_data, PRCM_REQ_MB5_I2CVAL); + + ret = wait_for_i2c_req_done(); + if (ret) { + printf("prcmu_i2c_write: mailbox request timed out\n"); + return ret; + } + + /* retrieve values */ + debug("ack-mb5:transfer status = %x\n", + readb(PRCM_ACK_MB5_STATUS)); + debug("ack-mb5:reg bank = %x\n", readb(PRCM_ACK_MB5) >> 1); + debug("ack-mb5:slave_add = %x\n", + readb(PRCM_ACK_MB5_SLAVE)); + debug("ack-mb5:reg_val = %d\n", readb(PRCM_ACK_MB5_VAL)); + + i2c_status = readb(PRCM_ACK_MB5_STATUS); + debug("\ni2c_status = %x\n", i2c_status); + /* clear mailbox 5 ack irq */ + writel(I2C_MBOX_BIT, PRCM_ARM_IT1_CLEAR); + + if (i2c_status == I2C_WR_OK) + return 0; + + printf("%s: i2c_status : 0x%x\n", __func__, i2c_status); + return -1; +} + +void u8500_prcmu_enable(u32 *reg) +{ + writel(readl(reg) | (1 << 8), reg); +} + +void db8500_prcmu_init(void) +{ + /* Enable timers */ + writel(1 << 17, PRCM_TCR); + + u8500_prcmu_enable((u32 *)PRCM_PER1CLK_MGT_REG); + u8500_prcmu_enable((u32 *)PRCM_PER2CLK_MGT_REG); + u8500_prcmu_enable((u32 *)PRCM_PER3CLK_MGT_REG); + /* PER4CLK does not exist */ + u8500_prcmu_enable((u32 *)PRCM_PER5CLK_MGT_REG); + u8500_prcmu_enable((u32 *)PRCM_PER6CLK_MGT_REG); + /* Only exists in ED but is always ok to write to */ + u8500_prcmu_enable((u32 *)PRCM_PER7CLK_MGT_REG); + + u8500_prcmu_enable((u32 *)PRCM_UARTCLK_MGT_REG); + u8500_prcmu_enable((u32 *)PRCM_I2CCLK_MGT_REG); + + u8500_prcmu_enable((u32 *)PRCM_SDMMCCLK_MGT_REG); + + /* Clean up the mailbox interrupts after pre-u-boot code. */ + writel(I2C_MBOX_BIT, PRCM_ARM_IT1_CLEAR); +} diff --git a/arch/arm/cpu/tegra20-common/Makefile b/arch/arm/cpu/tegra20-common/Makefile new file mode 100644 index 0000000000..43c96c6864 --- /dev/null +++ b/arch/arm/cpu/tegra20-common/Makefile @@ -0,0 +1,55 @@ +# +# (C) Copyright 2010,2011 Nvidia Corporation. +# +# (C) Copyright 2000-2008 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +# The AVP is ARMv4T architecture so we must use special compiler +# flags for any startup files it might use. +CFLAGS_arch/arm/cpu/tegra20-common/warmboot_avp.o += -march=armv4t + +LIB = $(obj)lib$(SOC)-common.o + +SOBJS += lowlevel_init.o +COBJS-y += ap20.o board.o clock.o funcmux.o pinmux.o sys_info.o timer.o +COBJS-$(CONFIG_TEGRA20_LP0) += warmboot.o crypto.o warmboot_avp.o +COBJS-$(CONFIG_TEGRA_CLOCK_SCALING) += emc.o +COBJS-$(CONFIG_TEGRA_PMU) += pmu.o + +SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS-y)) + +all: $(obj).depend $(LIB) + +$(LIB): $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/arch/arm/cpu/tegra20-common/ap20.c b/arch/arm/cpu/tegra20-common/ap20.c new file mode 100644 index 0000000000..00588dae52 --- /dev/null +++ b/arch/arm/cpu/tegra20-common/ap20.c @@ -0,0 +1,131 @@ +/* +* (C) Copyright 2010-2011 +* NVIDIA Corporation <www.nvidia.com> +* +* See file CREDITS for list of people who contributed to this +* project. +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License as +* published by the Free Software Foundation; either version 2 of +* the License, or (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 59 Temple Place, Suite 330, Boston, +* MA 02111-1307 USA +*/ +#include <asm/io.h> +#include <asm/arch/ap20.h> +#include <asm/arch/fuse.h> +#include <asm/arch/gp_padctrl.h> +#include <asm/arch/pmc.h> +#include <asm/arch/scu.h> +#include <asm/arch/warmboot.h> +#include <common.h> + +int tegra_get_chip_type(void) +{ + struct apb_misc_gp_ctlr *gp; + struct fuse_regs *fuse = (struct fuse_regs *)TEGRA20_FUSE_BASE; + uint tegra_sku_id, rev; + + /* + * This is undocumented, Chip ID is bits 15:8 of the register + * APB_MISC + 0x804, and has value 0x20 for Tegra20, 0x30 for + * Tegra30 + */ + gp = (struct apb_misc_gp_ctlr *)TEGRA20_APB_MISC_GP_BASE; + rev = (readl(&gp->hidrev) & HIDREV_CHIPID_MASK) >> HIDREV_CHIPID_SHIFT; + + tegra_sku_id = readl(&fuse->sku_info) & 0xff; + + switch (rev) { + case CHIPID_TEGRA20: + switch (tegra_sku_id) { + case SKU_ID_T20: + return TEGRA_SOC_T20; + case SKU_ID_T25SE: + case SKU_ID_AP25: + case SKU_ID_T25: + case SKU_ID_AP25E: + case SKU_ID_T25E: + return TEGRA_SOC_T25; + } + break; + } + /* unknown sku id */ + return TEGRA_SOC_UNKNOWN; +} + +static void enable_scu(void) +{ + struct scu_ctlr *scu = (struct scu_ctlr *)NV_PA_ARM_PERIPHBASE; + u32 reg; + + /* If SCU already setup/enabled, return */ + if (readl(&scu->scu_ctrl) & SCU_CTRL_ENABLE) + return; + + /* Invalidate all ways for all processors */ + writel(0xFFFF, &scu->scu_inv_all); + + /* Enable SCU - bit 0 */ + reg = readl(&scu->scu_ctrl); + reg |= SCU_CTRL_ENABLE; + writel(reg, &scu->scu_ctrl); +} + +static u32 get_odmdata(void) +{ + /* + * ODMDATA is stored in the BCT in IRAM by the BootROM. + * The BCT start and size are stored in the BIT in IRAM. + * Read the data @ bct_start + (bct_size - 12). This works + * on T20 and T30 BCTs, which are locked down. If this changes + * in new chips (T114, etc.), we can revisit this algorithm. + */ + + u32 bct_start, odmdata; + + bct_start = readl(AP20_BASE_PA_SRAM + NVBOOTINFOTABLE_BCTPTR); + odmdata = readl(bct_start + BCT_ODMDATA_OFFSET); + + return odmdata; +} + +static void init_pmc_scratch(void) +{ + struct pmc_ctlr *const pmc = (struct pmc_ctlr *)TEGRA20_PMC_BASE; + u32 odmdata; + int i; + + /* SCRATCH0 is initialized by the boot ROM and shouldn't be cleared */ + for (i = 0; i < 23; i++) + writel(0, &pmc->pmc_scratch1+i); + + /* ODMDATA is for kernel use to determine RAM size, LP config, etc. */ + odmdata = get_odmdata(); + writel(odmdata, &pmc->pmc_scratch20); +} + +void s_init(void) +{ + /* Init PMC scratch memory */ + init_pmc_scratch(); + + enable_scu(); + + /* enable SMP mode and FW for CPU0, by writing to Auxiliary Ctl reg */ + asm volatile( + "mrc p15, 0, r0, c1, c0, 1\n" + "orr r0, r0, #0x41\n" + "mcr p15, 0, r0, c1, c0, 1\n"); + + /* FIXME: should have ap20's L2 disabled too? */ +} diff --git a/arch/arm/cpu/armv7/tegra2/board.c b/arch/arm/cpu/tegra20-common/board.c index 923678d063..598023aba9 100644 --- a/arch/arm/cpu/armv7/tegra2/board.c +++ b/arch/arm/cpu/tegra20-common/board.c @@ -23,12 +23,12 @@ #include <common.h> #include <asm/io.h> -#include <asm/arch/ap20.h> #include <asm/arch/clock.h> #include <asm/arch/funcmux.h> #include <asm/arch/pmc.h> #include <asm/arch/sys_proto.h> -#include <asm/arch/tegra2.h> +#include <asm/arch/tegra20.h> +#include <asm/arch/warmboot.h> DECLARE_GLOBAL_DATA_PTR; @@ -47,7 +47,7 @@ enum { unsigned int query_sdram_size(void) { - struct pmc_ctlr *const pmc = (struct pmc_ctlr *)TEGRA2_PMC_BASE; + struct pmc_ctlr *const pmc = (struct pmc_ctlr *)TEGRA20_PMC_BASE; u32 reg; reg = readl(&pmc->pmc_scratch20); @@ -80,33 +80,12 @@ int checkboard(void) } #endif /* CONFIG_DISPLAY_BOARDINFO */ -#ifdef CONFIG_ARCH_CPU_INIT -/* - * Note this function is executed by the ARM7TDMI AVP. It does not return - * in this case. It is also called once the A9 starts up, but does nothing in - * that case. - */ -int arch_cpu_init(void) -{ - /* Fire up the Cortex A9 */ - tegra2_start(); - - /* We didn't do this init in start.S, so do it now */ - cpu_init_cp15(); - - /* Initialize essential common plls */ - clock_early_init(); - - return 0; -} -#endif - static int uart_configs[] = { -#if defined(CONFIG_TEGRA2_UARTA_UAA_UAB) +#if defined(CONFIG_TEGRA20_UARTA_UAA_UAB) FUNCMUX_UART1_UAA_UAB, -#elif defined(CONFIG_TEGRA2_UARTA_GPU) +#elif defined(CONFIG_TEGRA20_UARTA_GPU) FUNCMUX_UART1_GPU, -#elif defined(CONFIG_TEGRA2_UARTA_SDIO1) +#elif defined(CONFIG_TEGRA20_UARTA_SDIO1) FUNCMUX_UART1_SDIO1, #else FUNCMUX_UART1_IRRX_IRTX, @@ -146,13 +125,13 @@ void board_init_uart_f(void) { int uart_ids = 0; /* bit mask of which UART ids to enable */ -#ifdef CONFIG_TEGRA2_ENABLE_UARTA +#ifdef CONFIG_TEGRA20_ENABLE_UARTA uart_ids |= UARTA; #endif -#ifdef CONFIG_TEGRA2_ENABLE_UARTB +#ifdef CONFIG_TEGRA20_ENABLE_UARTB uart_ids |= UARTB; #endif -#ifdef CONFIG_TEGRA2_ENABLE_UARTD +#ifdef CONFIG_TEGRA20_ENABLE_UARTD uart_ids |= UARTD; #endif setup_uarts(uart_ids); diff --git a/arch/arm/cpu/armv7/tegra2/clock.c b/arch/arm/cpu/tegra20-common/clock.c index 602589cde0..24038745bd 100644 --- a/arch/arm/cpu/armv7/tegra2/clock.c +++ b/arch/arm/cpu/tegra20-common/clock.c @@ -19,13 +19,13 @@ * MA 02111-1307 USA */ -/* Tegra2 Clock control functions */ +/* Tegra20 Clock control functions */ #include <asm/io.h> #include <asm/arch/clk_rst.h> #include <asm/arch/clock.h> #include <asm/arch/timer.h> -#include <asm/arch/tegra2.h> +#include <asm/arch/tegra20.h> #include <common.h> #include <div64.h> #include <fdtdec.h> @@ -49,7 +49,7 @@ static unsigned osc_freq[CLOCK_OSC_FREQ_COUNT] = { }; /* - * Clock types that we can use as a source. The Tegra2 has muxes for the + * Clock types that we can use as a source. The Tegra20 has muxes for the * peripheral clocks, and in most cases there are four options for the clock * source. This gives us a clock 'type' and exploits what commonality exists * in the device. @@ -848,7 +848,7 @@ void reset_cmplx_set_enable(int cpu, int which, int reset) (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; u32 mask; - /* Form the mask, which depends on the cpu chosen. Tegra2 has 2 */ + /* Form the mask, which depends on the cpu chosen. Tegra20 has 2 */ assert(cpu >= 0 && cpu < 2); mask = which << cpu; @@ -976,7 +976,7 @@ void clock_ll_start_uart(enum periph_id periph_id) * the same but we are very cautious so we check that a valid clock ID is * provided. * - * @param clk_id Clock ID according to tegra2 device tree binding + * @param clk_id Clock ID according to tegra20 device tree binding * @return peripheral ID, or PERIPH_ID_NONE if the clock ID is invalid */ static enum periph_id clk_id_to_periph_id(int clk_id) diff --git a/arch/arm/cpu/armv7/tegra2/crypto.c b/arch/arm/cpu/tegra20-common/crypto.c index 5f0b240e27..5f0b240e27 100644 --- a/arch/arm/cpu/armv7/tegra2/crypto.c +++ b/arch/arm/cpu/tegra20-common/crypto.c diff --git a/arch/arm/cpu/armv7/tegra2/crypto.h b/arch/arm/cpu/tegra20-common/crypto.h index aff67e77b0..aff67e77b0 100644 --- a/arch/arm/cpu/armv7/tegra2/crypto.h +++ b/arch/arm/cpu/tegra20-common/crypto.h diff --git a/arch/arm/cpu/armv7/tegra2/emc.c b/arch/arm/cpu/tegra20-common/emc.c index c0e5c565f1..ffc05e453a 100644 --- a/arch/arm/cpu/armv7/tegra2/emc.c +++ b/arch/arm/cpu/tegra20-common/emc.c @@ -27,7 +27,7 @@ #include <asm/arch/apb_misc.h> #include <asm/arch/clock.h> #include <asm/arch/emc.h> -#include <asm/arch/tegra2.h> +#include <asm/arch/tegra20.h> /* * The EMC registers have shadow registers. When the EMC clock is updated diff --git a/arch/arm/cpu/armv7/tegra2/funcmux.c b/arch/arm/cpu/tegra20-common/funcmux.c index 4a31a4cf0c..8cfed645ce 100644 --- a/arch/arm/cpu/armv7/tegra2/funcmux.c +++ b/arch/arm/cpu/tegra20-common/funcmux.c @@ -19,7 +19,7 @@ * MA 02111-1307 USA */ -/* Tegra2 high-level function multiplexing */ +/* Tegra20 high-level function multiplexing */ #include <common.h> #include <asm/arch/clock.h> #include <asm/arch/funcmux.h> diff --git a/arch/arm/cpu/armv7/tegra2/lowlevel_init.S b/arch/arm/cpu/tegra20-common/lowlevel_init.S index d117f23a62..d117f23a62 100644 --- a/arch/arm/cpu/armv7/tegra2/lowlevel_init.S +++ b/arch/arm/cpu/tegra20-common/lowlevel_init.S diff --git a/arch/arm/cpu/armv7/tegra2/pinmux.c b/arch/arm/cpu/tegra20-common/pinmux.c index b053f90608..70e84dfa17 100644 --- a/arch/arm/cpu/armv7/tegra2/pinmux.c +++ b/arch/arm/cpu/tegra20-common/pinmux.c @@ -19,10 +19,10 @@ * MA 02111-1307 USA */ -/* Tegra2 pin multiplexing functions */ +/* Tegra20 pin multiplexing functions */ #include <asm/io.h> -#include <asm/arch/tegra2.h> +#include <asm/arch/tegra20.h> #include <asm/arch/pinmux.h> #include <common.h> diff --git a/arch/arm/cpu/armv7/tegra2/pmu.c b/arch/arm/cpu/tegra20-common/pmu.c index 46738023ff..53505e9c50 100644 --- a/arch/arm/cpu/armv7/tegra2/pmu.c +++ b/arch/arm/cpu/tegra20-common/pmu.c @@ -25,7 +25,7 @@ #include <tps6586x.h> #include <asm/io.h> #include <asm/arch/ap20.h> -#include <asm/arch/tegra2.h> +#include <asm/arch/tegra20.h> #include <asm/arch/tegra_i2c.h> #include <asm/arch/sys_proto.h> diff --git a/arch/arm/cpu/armv7/tegra2/sys_info.c b/arch/arm/cpu/tegra20-common/sys_info.c index 6d11dc16bf..1a0bb561a7 100644 --- a/arch/arm/cpu/armv7/tegra2/sys_info.c +++ b/arch/arm/cpu/tegra20-common/sys_info.c @@ -27,7 +27,7 @@ /* Print CPU information */ int print_cpuinfo(void) { - puts("TEGRA2\n"); + puts("TEGRA20\n"); /* TBD: Add printf of major/minor rev info, stepping, etc. */ return 0; diff --git a/arch/arm/cpu/armv7/tegra2/timer.c b/arch/arm/cpu/tegra20-common/timer.c index b12b12cc30..562e414012 100644 --- a/arch/arm/cpu/armv7/tegra2/timer.c +++ b/arch/arm/cpu/tegra20-common/timer.c @@ -37,7 +37,7 @@ #include <common.h> #include <asm/io.h> -#include <asm/arch/tegra2.h> +#include <asm/arch/tegra20.h> #include <asm/arch/timer.h> DECLARE_GLOBAL_DATA_PTR; diff --git a/arch/arm/cpu/armv7/tegra2/warmboot.c b/arch/arm/cpu/tegra20-common/warmboot.c index 25d896888a..809ea0133e 100644 --- a/arch/arm/cpu/armv7/tegra2/warmboot.c +++ b/arch/arm/cpu/tegra20-common/warmboot.c @@ -29,7 +29,7 @@ #include <asm/arch/clock.h> #include <asm/arch/pmc.h> #include <asm/arch/pinmux.h> -#include <asm/arch/tegra2.h> +#include <asm/arch/tegra20.h> #include <asm/arch/fuse.h> #include <asm/arch/emc.h> #include <asm/arch/gp_padctrl.h> @@ -39,7 +39,7 @@ DECLARE_GLOBAL_DATA_PTR; #ifndef CONFIG_TEGRA_CLOCK_SCALING -#error "You must enable CONFIG_TEGRA_CLOCK_SCALING to use CONFIG_TEGRA2_LP0" +#error "You must enable CONFIG_TEGRA_CLOCK_SCALING to use CONFIG_TEGRA20_LP0" #endif /* @@ -139,9 +139,9 @@ int warmboot_save_sdram_params(void) u32 ram_code; struct sdram_params sdram; struct pmux_tri_ctlr *pmt = (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE; - struct pmc_ctlr *pmc = (struct pmc_ctlr *)TEGRA2_PMC_BASE; + struct pmc_ctlr *pmc = (struct pmc_ctlr *)TEGRA20_PMC_BASE; struct apb_misc_gp_ctlr *gp = - (struct apb_misc_gp_ctlr *)TEGRA2_APB_MISC_GP_BASE; + (struct apb_misc_gp_ctlr *)TEGRA20_APB_MISC_GP_BASE; struct emc_ctlr *emc = emc_get_controller(gd->fdt_blob); union scratch2_reg scratch2; union scratch4_reg scratch4; @@ -205,7 +205,7 @@ static u32 get_major_version(void) { u32 major_id; struct apb_misc_gp_ctlr *gp = - (struct apb_misc_gp_ctlr *)TEGRA2_APB_MISC_GP_BASE; + (struct apb_misc_gp_ctlr *)TEGRA20_APB_MISC_GP_BASE; major_id = (readl(&gp->hidrev) & HIDREV_MAJORPREV_MASK) >> HIDREV_MAJORPREV_SHIFT; @@ -229,7 +229,7 @@ static int is_failure_analysis_mode(struct fuse_regs *fuse) static int ap20_is_odm_production_mode(void) { - struct fuse_regs *fuse = (struct fuse_regs *)TEGRA2_FUSE_BASE; + struct fuse_regs *fuse = (struct fuse_regs *)TEGRA20_FUSE_BASE; if (!is_failure_analysis_mode(fuse) && is_odm_production_mode_fuse_set(fuse)) @@ -240,7 +240,7 @@ static int ap20_is_odm_production_mode(void) static int ap20_is_production_mode(void) { - struct fuse_regs *fuse = (struct fuse_regs *)TEGRA2_FUSE_BASE; + struct fuse_regs *fuse = (struct fuse_regs *)TEGRA20_FUSE_BASE; if (get_major_version() == 0) return 1; @@ -257,11 +257,11 @@ static enum fuse_operating_mode fuse_get_operation_mode(void) { u32 chip_id; struct apb_misc_gp_ctlr *gp = - (struct apb_misc_gp_ctlr *)TEGRA2_APB_MISC_GP_BASE; + (struct apb_misc_gp_ctlr *)TEGRA20_APB_MISC_GP_BASE; chip_id = (readl(&gp->hidrev) & HIDREV_CHIPID_MASK) >> HIDREV_CHIPID_SHIFT; - if (chip_id == CHIPID_TEGRA2) { + if (chip_id == CHIPID_TEGRA20) { if (ap20_is_odm_production_mode()) { printf("!! odm_production_mode is not supported !!\n"); return MODE_UNDEFINED; diff --git a/arch/arm/cpu/armv7/tegra2/warmboot_avp.c b/arch/arm/cpu/tegra20-common/warmboot_avp.c index 70bcd8e5f3..cd01908a46 100644 --- a/arch/arm/cpu/armv7/tegra2/warmboot_avp.c +++ b/arch/arm/cpu/tegra20-common/warmboot_avp.c @@ -29,7 +29,7 @@ #include <asm/arch/flow.h> #include <asm/arch/pinmux.h> #include <asm/arch/pmc.h> -#include <asm/arch/tegra2.h> +#include <asm/arch/tegra20.h> #include <asm/arch/warmboot.h> #include "warmboot_avp.h" @@ -38,7 +38,7 @@ void wb_start(void) { struct pmux_tri_ctlr *pmt = (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE; - struct pmc_ctlr *pmc = (struct pmc_ctlr *)TEGRA2_PMC_BASE; + struct pmc_ctlr *pmc = (struct pmc_ctlr *)TEGRA20_PMC_BASE; struct flow_ctlr *flow = (struct flow_ctlr *)NV_PA_FLOW_BASE; struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; diff --git a/arch/arm/cpu/armv7/tegra2/warmboot_avp.h b/arch/arm/cpu/tegra20-common/warmboot_avp.h index 4b71c07843..4b71c07843 100644 --- a/arch/arm/cpu/armv7/tegra2/warmboot_avp.h +++ b/arch/arm/cpu/tegra20-common/warmboot_avp.h diff --git a/arch/arm/include/asm/arch-am33xx/common_def.h b/arch/arm/include/asm/arch-am33xx/common_def.h deleted file mode 100644 index aa3b554536..0000000000 --- a/arch/arm/include/asm/arch-am33xx/common_def.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * common_def.h - * - * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __COMMON_DEF_H__ -#define __COMMON_DEF_H__ - -extern void enable_uart0_pin_mux(void); -extern void enable_mmc0_pin_mux(void); -extern void enable_i2c0_pin_mux(void); - -#endif/*__COMMON_DEF_H__ */ diff --git a/arch/arm/include/asm/arch-am33xx/cpu.h b/arch/arm/include/asm/arch-am33xx/cpu.h index a027e3128f..6cfbef76a7 100644 --- a/arch/arm/include/asm/arch-am33xx/cpu.h +++ b/arch/arm/include/asm/arch-am33xx/cpu.h @@ -234,6 +234,39 @@ struct vtp_reg { struct ctrl_stat { unsigned int resv1[16]; unsigned int statusreg; /* ofset 0x40 */ + unsigned int resv2[51]; + unsigned int secure_emif_sdram_config; /* offset 0x0110 */ +}; + +/* AM33XX GPIO registers */ +#define OMAP_GPIO_REVISION 0x0000 +#define OMAP_GPIO_SYSCONFIG 0x0010 +#define OMAP_GPIO_SYSSTATUS 0x0114 +#define OMAP_GPIO_IRQSTATUS1 0x002c +#define OMAP_GPIO_IRQSTATUS2 0x0030 +#define OMAP_GPIO_CTRL 0x0130 +#define OMAP_GPIO_OE 0x0134 +#define OMAP_GPIO_DATAIN 0x0138 +#define OMAP_GPIO_DATAOUT 0x013c +#define OMAP_GPIO_LEVELDETECT0 0x0140 +#define OMAP_GPIO_LEVELDETECT1 0x0144 +#define OMAP_GPIO_RISINGDETECT 0x0148 +#define OMAP_GPIO_FALLINGDETECT 0x014c +#define OMAP_GPIO_DEBOUNCE_EN 0x0150 +#define OMAP_GPIO_DEBOUNCE_VAL 0x0154 +#define OMAP_GPIO_CLEARDATAOUT 0x0190 +#define OMAP_GPIO_SETDATAOUT 0x0194 + +/* Control Device Register */ +struct ctrl_dev { + unsigned int deviceid; /* offset 0x00 */ + unsigned int resv1[11]; + unsigned int macid0l; /* offset 0x30 */ + unsigned int macid0h; /* offset 0x34 */ + unsigned int macid1l; /* offset 0x38 */ + unsigned int macid1h; /* offset 0x3c */ + unsigned int resv2[4]; + unsigned int miisel; /* offset 0x50 */ }; #endif /* __ASSEMBLY__ */ #endif /* __KERNEL_STRICT_NAMES */ diff --git a/arch/arm/include/asm/arch-am33xx/ddr_defs.h b/arch/arm/include/asm/arch-am33xx/ddr_defs.h index 388336f9d7..6b22c45f77 100644 --- a/arch/arm/include/asm/arch-am33xx/ddr_defs.h +++ b/arch/arm/include/asm/arch-am33xx/ddr_defs.h @@ -20,158 +20,104 @@ #define _DDR_DEFS_H #include <asm/arch/hardware.h> +#include <asm/emif.h> /* AM335X EMIF Register values */ -#define EMIF_SDMGT 0x80000000 -#define EMIF_SDRAM 0x00004650 -#define EMIF_PHYCFG 0x2 -#define DDR_PHY_RESET (0x1 << 10) -#define DDR_FUNCTIONAL_MODE_EN 0x1 -#define DDR_PHY_READY (0x1 << 2) #define VTP_CTRL_READY (0x1 << 5) #define VTP_CTRL_ENABLE (0x1 << 6) -#define VTP_CTRL_LOCK_EN (0x1 << 4) #define VTP_CTRL_START_EN (0x1) -#define DDR2_RATIO 0x80 -#define CMD_FORCE 0x00 -#define CMD_DELAY 0x00 - -#define EMIF_READ_LATENCY 0x05 -#define EMIF_TIM1 0x0666B3D6 -#define EMIF_TIM2 0x143731DA -#define EMIF_TIM3 0x00000347 -#define EMIF_SDCFG 0x43805332 -#define EMIF_SDREF 0x0000081a +#define PHY_DLL_LOCK_DIFF 0x0 +#define DDR_CKE_CTRL_NORMAL 0x1 + +#define DDR2_EMIF_READ_LATENCY 0x100005 /* Enable Dynamic Power Down */ +#define DDR2_EMIF_TIM1 0x0666B3C9 +#define DDR2_EMIF_TIM2 0x243631CA +#define DDR2_EMIF_TIM3 0x0000033F +#define DDR2_EMIF_SDCFG 0x41805332 +#define DDR2_EMIF_SDREF 0x0000081a #define DDR2_DLL_LOCK_DIFF 0x0 -#define DDR2_RD_DQS 0x12 -#define DDR2_PHY_FIFO_WE 0x80 - +#define DDR2_RATIO 0x80 #define DDR2_INVERT_CLKOUT 0x00 +#define DDR2_RD_DQS 0x12 #define DDR2_WR_DQS 0x00 #define DDR2_PHY_WRLVL 0x00 #define DDR2_PHY_GATELVL 0x00 #define DDR2_PHY_WR_DATA 0x40 -#define PHY_RANK0_DELAY 0x01 -#define PHY_DLL_LOCK_DIFF 0x0 -#define DDR_IOCTRL_VALUE 0x18B - -/** - * This structure represents the EMIF registers on AM33XX devices. - */ -struct emif_regs { - unsigned int sdrrev; /* offset 0x00 */ - unsigned int sdrstat; /* offset 0x04 */ - unsigned int sdrcr; /* offset 0x08 */ - unsigned int sdrcr2; /* offset 0x0C */ - unsigned int sdrrcr; /* offset 0x10 */ - unsigned int sdrrcsr; /* offset 0x14 */ - unsigned int sdrtim1; /* offset 0x18 */ - unsigned int sdrtim1sr; /* offset 0x1C */ - unsigned int sdrtim2; /* offset 0x20 */ - unsigned int sdrtim2sr; /* offset 0x24 */ - unsigned int sdrtim3; /* offset 0x28 */ - unsigned int sdrtim3sr; /* offset 0x2C */ - unsigned int res1[2]; - unsigned int sdrmcr; /* offset 0x38 */ - unsigned int sdrmcsr; /* offset 0x3C */ - unsigned int res2[8]; - unsigned int sdritr; /* offset 0x60 */ - unsigned int res3[32]; - unsigned int ddrphycr; /* offset 0xE4 */ - unsigned int ddrphycsr; /* offset 0xE8 */ - unsigned int ddrphycr2; /* offset 0xEC */ -}; - -/** - * Encapsulates DDR PHY control and corresponding shadow registers. - */ -struct ddr_phy_control { - unsigned long reg; - unsigned long reg_sh; - unsigned long reg2; -}; - -/** - * Encapsulates SDRAM timing and corresponding shadow registers. - */ -struct sdram_timing { - unsigned long time1; - unsigned long time1_sh; - unsigned long time2; - unsigned long time2_sh; - unsigned long time3; - unsigned long time3_sh; -}; - -/** - * Encapsulates SDRAM configuration. - * (Includes refresh control registers) */ -struct sdram_config { - unsigned long sdrcr; - unsigned long sdrcr2; - unsigned long refresh; - unsigned long refresh_sh; -}; +#define DDR2_PHY_FIFO_WE 0x80 +#define DDR2_PHY_RANK0_DELAY 0x1 +#define DDR2_IOCTRL_VALUE 0x18B + +/* Micron MT41J128M16JT-125 */ +#define DDR3_EMIF_READ_LATENCY 0x06 +#define DDR3_EMIF_TIM1 0x0888A39B +#define DDR3_EMIF_TIM2 0x26337FDA +#define DDR3_EMIF_TIM3 0x501F830F +#define DDR3_EMIF_SDCFG 0x61C04AB2 +#define DDR3_EMIF_SDREF 0x0000093B +#define DDR3_ZQ_CFG 0x50074BE4 +#define DDR3_DLL_LOCK_DIFF 0x1 +#define DDR3_RATIO 0x40 +#define DDR3_INVERT_CLKOUT 0x1 +#define DDR3_RD_DQS 0x3B +#define DDR3_WR_DQS 0x85 +#define DDR3_PHY_WR_DATA 0xC1 +#define DDR3_PHY_FIFO_WE 0x100 +#define DDR3_IOCTRL_VALUE 0x18B /** * Configure SDRAM */ -int config_sdram(struct sdram_config *cfg); +void config_sdram(const struct emif_regs *regs); /** * Set SDRAM timings */ -int set_sdram_timings(struct sdram_timing *val); +void set_sdram_timings(const struct emif_regs *regs); /** * Configure DDR PHY */ -int config_ddr_phy(struct ddr_phy_control *cfg); +void config_ddr_phy(const struct emif_regs *regs); /** * This structure represents the DDR registers on AM33XX devices. + * We make use of DDR_PHY_BASE_ADDR2 to address the DATA1 registers that + * correspond to DATA1 registers defined here. */ struct ddr_regs { unsigned int resv0[7]; unsigned int cm0csratio; /* offset 0x01C */ - unsigned int cm0csforce; /* offset 0x020 */ - unsigned int cm0csdelay; /* offset 0x024 */ + unsigned int resv1[2]; unsigned int cm0dldiff; /* offset 0x028 */ unsigned int cm0iclkout; /* offset 0x02C */ - unsigned int resv1[8]; + unsigned int resv2[8]; unsigned int cm1csratio; /* offset 0x050 */ - unsigned int cm1csforce; /* offset 0x054 */ - unsigned int cm1csdelay; /* offset 0x058 */ + unsigned int resv3[2]; unsigned int cm1dldiff; /* offset 0x05C */ unsigned int cm1iclkout; /* offset 0x060 */ - unsigned int resv2[8]; + unsigned int resv4[8]; unsigned int cm2csratio; /* offset 0x084 */ - unsigned int cm2csforce; /* offset 0x088 */ - unsigned int cm2csdelay; /* offset 0x08C */ + unsigned int resv5[2]; unsigned int cm2dldiff; /* offset 0x090 */ unsigned int cm2iclkout; /* offset 0x094 */ - unsigned int resv3[12]; + unsigned int resv6[12]; unsigned int dt0rdsratio0; /* offset 0x0C8 */ - unsigned int dt0rdsratio1; /* offset 0x0CC */ - unsigned int resv4[3]; + unsigned int resv7[4]; unsigned int dt0wdsratio0; /* offset 0x0DC */ - unsigned int dt0wdsratio1; /* offset 0x0E0 */ - unsigned int resv5[3]; + unsigned int resv8[4]; unsigned int dt0wiratio0; /* offset 0x0F0 */ - unsigned int dt0wiratio1; /* offset 0x0F4 */ + unsigned int resv9; + unsigned int dt0wimode0; /* offset 0x0F8 */ unsigned int dt0giratio0; /* offset 0x0FC */ - unsigned int dt0giratio1; /* offset 0x100 */ - unsigned int resv6[1]; + unsigned int resv10; + unsigned int dt0gimode0; /* offset 0x104 */ unsigned int dt0fwsratio0; /* offset 0x108 */ - unsigned int dt0fwsratio1; /* offset 0x10C */ - unsigned int resv7[4]; + unsigned int resv11[4]; + unsigned int dt0dqoffset; /* offset 0x11C */ unsigned int dt0wrsratio0; /* offset 0x120 */ - unsigned int dt0wrsratio1; /* offset 0x124 */ - unsigned int resv8[3]; + unsigned int resv12[4]; unsigned int dt0rdelays0; /* offset 0x134 */ unsigned int dt0dldiff0; /* offset 0x138 */ - unsigned int resv9[39]; - unsigned int dt1rdelays0; /* offset 0x1D8 */ }; /** @@ -200,29 +146,24 @@ struct cmd_control { */ struct ddr_data { unsigned long datardsratio0; - unsigned long datardsratio1; unsigned long datawdsratio0; - unsigned long datawdsratio1; unsigned long datawiratio0; - unsigned long datawiratio1; unsigned long datagiratio0; - unsigned long datagiratio1; unsigned long datafwsratio0; - unsigned long datafwsratio1; unsigned long datawrsratio0; - unsigned long datawrsratio1; + unsigned long datauserank0delay; unsigned long datadldiff0; }; /** * Configure DDR CMD control registers */ -int config_cmd_ctrl(struct cmd_control *cmd); +void config_cmd_ctrl(const struct cmd_control *cmd); /** * Configure DDR DATA registers */ -int config_ddr_data(int data_macrono, struct ddr_data *data); +void config_ddr_data(int data_macrono, const struct ddr_data *data); /** * This structure represents the DDR io control on AM33XX devices. @@ -238,20 +179,9 @@ struct ddr_cmdtctrl { }; /** - * Encapsulates DDR CMD & DATA io control registers. - */ -struct ddr_ioctrl { - unsigned long cmd1ctl; - unsigned long cmd2ctl; - unsigned long cmd3ctl; - unsigned long data1ctl; - unsigned long data2ctl; -}; - -/** * Configure DDR io control registers */ -int config_io_ctrl(struct ddr_ioctrl *ioctrl); +void config_io_ctrl(unsigned long val); struct ddr_ctrl { unsigned int ddrioctrl; @@ -259,6 +189,6 @@ struct ddr_ctrl { unsigned int ddrckectrl; }; -void config_ddr(void); +void config_ddr(short ddr_type); #endif /* _DDR_DEFS_H */ diff --git a/arch/arm/include/asm/arch-am33xx/gpio.h b/arch/arm/include/asm/arch-am33xx/gpio.h new file mode 100644 index 0000000000..1a211e95e8 --- /dev/null +++ b/arch/arm/include/asm/arch-am33xx/gpio.h @@ -0,0 +1,29 @@ +/* + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ +#ifndef _GPIO_AM33xx_H +#define _GPIO_AM33xx_H + +#include <asm/omap_gpio.h> + +#define AM33XX_GPIO0_BASE 0x44E07000 +#define AM33XX_GPIO1_BASE 0x4804C000 +#define AM33XX_GPIO2_BASE 0x481AC000 +#define AM33XX_GPIO3_BASE 0x481AE000 + +#endif /* _GPIO_AM33xx_H */ diff --git a/arch/arm/include/asm/arch-am33xx/hardware.h b/arch/arm/include/asm/arch-am33xx/hardware.h index 0ec22eb918..62332f2ded 100644 --- a/arch/arm/include/asm/arch-am33xx/hardware.h +++ b/arch/arm/include/asm/arch-am33xx/hardware.h @@ -19,8 +19,9 @@ #ifndef __AM33XX_HARDWARE_H #define __AM33XX_HARDWARE_H +#include <asm/arch/omap.h> + /* Module base addresses */ -#define LOW_LEVEL_SRAM_STACK 0x4030B7FC #define UART0_BASE 0x44E09000 /* DM Timer base addresses */ @@ -46,6 +47,7 @@ /* Control Module Base Address */ #define CTRL_BASE 0x44E10000 +#define CTRL_DEVICE_BASE 0x44E10600 /* PRCM Base Address */ #define PRCM_BASE 0x44E00000 @@ -53,7 +55,6 @@ /* EMIF Base address */ #define EMIF4_0_CFG_BASE 0x4C000000 #define EMIF4_1_CFG_BASE 0x4D000000 -#define DMM_BASE 0x4E000000 /* PLL related registers */ #define CM_PER 0x44E00000 @@ -78,4 +79,8 @@ #define DDRPHY_0_CONFIG_BASE (CTRL_BASE + 0x1400) #define DDRPHY_CONFIG_BASE DDRPHY_0_CONFIG_BASE +/* CPSW Config space */ +#define AM335X_CPSW_BASE 0x4A100000 +#define AM335X_CPSW_MDIO_BASE 0x4A101000 + #endif /* __AM33XX_HARDWARE_H */ diff --git a/arch/arm/include/asm/arch-am33xx/mmc_host_def.h b/arch/arm/include/asm/arch-am33xx/mmc_host_def.h index 26cc300e70..1f597c0eec 100644 --- a/arch/arm/include/asm/arch-am33xx/mmc_host_def.h +++ b/arch/arm/include/asm/arch-am33xx/mmc_host_def.h @@ -20,8 +20,7 @@ * OMAP HSMMC register definitions */ #define OMAP_HSMMC1_BASE 0x48060100 -#define OMAP_HSMMC2_BASE 0x481D8000 -#define OMAP_HSMMC3_BASE 0x47C24000 +#define OMAP_HSMMC2_BASE 0x481D8100 typedef struct hsmmc { unsigned char res1[0x10]; diff --git a/arch/arm/include/asm/arch-am33xx/omap.h b/arch/arm/include/asm/arch-am33xx/omap.h index fc2b7a5a28..850f8a551d 100644 --- a/arch/arm/include/asm/arch-am33xx/omap.h +++ b/arch/arm/include/asm/arch-am33xx/omap.h @@ -30,7 +30,6 @@ */ #define NON_SECURE_SRAM_START 0x40304000 #define NON_SECURE_SRAM_END 0x4030E000 -#define LOW_LEVEL_SRAM_STACK 0x4030B7FC /* ROM code defines */ /* Boot device */ diff --git a/arch/arm/include/asm/arch-am33xx/sys_proto.h b/arch/arm/include/asm/arch-am33xx/sys_proto.h index 6c58f1b30f..819ea650f0 100644 --- a/arch/arm/include/asm/arch-am33xx/sys_proto.h +++ b/arch/arm/include/asm/arch-am33xx/sys_proto.h @@ -19,6 +19,24 @@ #ifndef _SYS_PROTO_H_ #define _SYS_PROTO_H_ +/* + * AM335x parts define a system EEPROM that defines certain sub-fields. + * We use these fields to in turn see what board we are on, and what + * that might require us to set or not set. + */ +#define HDR_NO_OF_MAC_ADDR 3 +#define HDR_ETH_ALEN 6 +#define HDR_NAME_LEN 8 + +struct am335x_baseboard_id { + unsigned int magic; + char name[HDR_NAME_LEN]; + char version[4]; + char serial[12]; + char config[32]; + char mac_addr[HDR_NO_OF_MAC_ADDR][HDR_ETH_ALEN]; +}; + #define BOARD_REV_ID 0x0 u32 get_cpu_rev(void); @@ -28,6 +46,18 @@ u32 get_sysboot_value(void); int print_cpuinfo(void); #endif +extern struct ctrl_stat *cstat; u32 get_device_type(void); void setup_clocks_for_console(void); +void ddr_pll_config(unsigned int ddrpll_M); + +/* + * We have three pin mux functions that must exist. We must be able to enable + * uart0, for initial output and i2c0 to read the main EEPROM. We then have a + * main pinmux function that can be overridden to enable all other pinmux that + * is required on the board. + */ +void enable_uart0_pin_mux(void); +void enable_i2c0_pin_mux(void); +void enable_board_pin_mux(struct am335x_baseboard_id *header); #endif diff --git a/arch/arm/include/asm/arch-at91/at91sam9_matrix.h b/arch/arm/include/asm/arch-at91/at91sam9_matrix.h index 6d97189d27..b9a93b0c8f 100644 --- a/arch/arm/include/asm/arch-at91/at91sam9_matrix.h +++ b/arch/arm/include/asm/arch-at91/at91sam9_matrix.h @@ -23,6 +23,8 @@ #include <asm/arch/at91cap9_matrix.h> #elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) #include <asm/arch/at91sam9g45_matrix.h> +#elif defined(CONFIG_AT91SAM9X5) +#include <asm/arch/at91sam9x5_matrix.h> #else #error "Unsupported AT91SAM9/CAP9 processor" #endif diff --git a/arch/arm/include/asm/arch-at91/at91sam9x5.h b/arch/arm/include/asm/arch-at91/at91sam9x5.h new file mode 100644 index 0000000000..0e728c96dc --- /dev/null +++ b/arch/arm/include/asm/arch-at91/at91sam9x5.h @@ -0,0 +1,170 @@ +/* + * Chip-specific header file for the AT91SAM9x5 family + * + * Copyright (C) 2012 Atmel Corporation. + * + * Definitions for the SoC: + * AT91SAM9x5 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __AT91SAM9X5_H__ +#define __AT91SAM9X5_H__ + +/* + * Peripheral identifiers/interrupts. + */ +#define ATMEL_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ +#define ATMEL_ID_SYS 1 /* System Controller Interrupt */ +#define ATMEL_ID_PIOAB 2 /* Parallel I/O Controller A and B */ +#define ATMEL_ID_PIOCD 3 /* Parallel I/O Controller C and D */ +#define ATMEL_ID_SMD 4 /* SMD Soft Modem (SMD) */ +#define ATMEL_ID_USART0 5 /* USART 0 */ +#define ATMEL_ID_USART1 6 /* USART 1 */ +#define ATMEL_ID_USART2 7 /* USART 2 */ +#define ATMEL_ID_TWI0 9 /* Two-Wire Interface 0 */ +#define ATMEL_ID_TWI1 10 /* Two-Wire Interface 1 */ +#define ATMEL_ID_TWI2 11 /* Two-Wire Interface 2 */ +#define ATMEL_ID_HSMCI0 12 /* High Speed Multimedia Card Interface 0 */ +#define ATMEL_ID_SPI0 13 /* Serial Peripheral Interface 0 */ +#define ATMEL_ID_SPI1 14 /* Serial Peripheral Interface 1 */ +#define ATMEL_ID_UART0 15 /* UART 0 */ +#define ATMEL_ID_UART1 16 /* UART 1 */ +#define ATMEL_ID_TC01 17 /* Timer Counter 0, 1, 2, 3, 4 and 5 */ +#define ATMEL_ID_PWM 18 /* Pulse Width Modulation Controller */ +#define ATMEL_ID_ADC 19 /* ADC Controller */ +#define ATMEL_ID_DMAC0 20 /* DMA Controller 0 */ +#define ATMEL_ID_DMAC1 21 /* DMA Controller 1 */ +#define ATMEL_ID_UHPHS 22 /* USB Host High Speed */ +#define ATMEL_ID_UDPHS 23 /* USB Device High Speed */ +#define ATMEL_ID_EMAC0 24 /* Ethernet MAC0 */ +#define ATMEL_ID_LCDC 25 /* LCD Controller */ +#define ATMEL_ID_HSMCI1 26 /* High Speed Multimedia Card Interface 1 */ +#define ATMEL_ID_EMAC1 27 /* Ethernet MAC1 */ +#define ATMEL_ID_SSC 28 /* Synchronous Serial Controller */ +#define ATMEL_ID_IRQ 31 /* Advanced Interrupt Controller */ + +/* + * User Peripheral physical base addresses. + */ +#define ATMEL_BASE_SPI0 0xf0000000 +#define ATMEL_BASE_SPI1 0xf0004000 +#define ATMEL_BASE_HSMCI0 0xf0008000 +#define ATMEL_BASE_HSMCI1 0xf000c000 +#define ATMEL_BASE_SSC 0xf0010000 +#define ATMEL_BASE_CAN0 0xf8000000 +#define ATMEL_BASE_CAN1 0xf8004000 +#define ATMEL_BASE_TC0 0xf8008000 +#define ATMEL_BASE_TC1 0xf8008040 +#define ATMEL_BASE_TC2 0xf8008080 +#define ATMEL_BASE_TC3 0xf800c000 +#define ATMEL_BASE_TC4 0xf800c040 +#define ATMEL_BASE_TC5 0xf800c080 +#define ATMEL_BASE_TWI0 0xf8010000 +#define ATMEL_BASE_TWI1 0xf8014000 +#define ATMEL_BASE_TWI2 0xf8018000 +#define ATMEL_BASE_USART0 0xf801c000 +#define ATMEL_BASE_USART1 0xf8020000 +#define ATMEL_BASE_USART2 0xf8024000 +#define ATMEL_BASE_USART3 0xf8028000 +#define ATMEL_BASE_EMAC0 0xf802c000 +#define ATMEL_BASE_EMAC1 0xf8030000 +#define ATMEL_BASE_PWM 0xf8034000 +#define ATMEL_BASE_LCDC 0xf8038000 +#define ATMEL_BASE_UDPHS 0xf803c000 +#define ATMEL_BASE_UART0 0xf8040000 +#define ATMEL_BASE_UART1 0xf8044000 +#define ATMEL_BASE_ISI 0xf8048000 +#define ATMEL_BASE_ADC 0xf804c000 +#define ATMEL_BASE_SYS 0xffffc000 + +/* + * System Peripherals + */ +#define ATMEL_BASE_MATRIX 0xffffde00 +#define ATMEL_BASE_PMECC 0xffffe000 +#define ATMEL_BASE_PMERRLOC 0xffffe600 +#define ATMEL_BASE_DDRSDRC 0xffffe800 +#define ATMEL_BASE_SMC 0xffffea00 +#define ATMEL_BASE_DMAC0 0xffffec00 +#define ATMEL_BASE_DMAC1 0xffffee00 +#define ATMEL_BASE_AIC 0xfffff000 +#define ATMEL_BASE_DBGU 0xfffff200 +#define ATMEL_BASE_PIOA 0xfffff400 +#define ATMEL_BASE_PIOB 0xfffff600 +#define ATMEL_BASE_PIOC 0xfffff800 +#define ATMEL_BASE_PIOD 0xfffffa00 +#define ATMEL_BASE_PMC 0xfffffc00 +#define ATMEL_BASE_RSTC 0xfffffe00 +#define ATMEL_BASE_SHDWC 0xfffffe10 +#define ATMEL_BASE_PIT 0xfffffe30 +#define ATMEL_BASE_WDT 0xfffffe40 +#define ATMEL_BASE_GPBR 0xfffffe60 +#define ATMEL_BASE_RTC 0xfffffeb0 + +/* + * Internal Memory. + */ +#define ATMEL_BASE_ROM 0x00100000 /* Internal ROM base address */ +#define ATMEL_BASE_SRAM 0x00300000 /* Internal SRAM base address */ +#define ATMEL_BASE_SMD 0x00400000 /* SMD Controller */ +#define ATMEL_BASE_UDPHS_FIFO 0x00500000 /* USB Device HS controller */ +#define ATMEL_BASE_OHCI 0x00600000 /* USB Host controller (OHCI) */ +#define ATMEL_BASE_EHCI 0x00700000 /* USB Host controller (EHCI) */ + +/* 9x5 series chip id definitions */ +#define ARCH_ID_AT91SAM9X5 0x819a05a0 +#define ARCH_ID_VERSION_MASK 0x1f +#define ARCH_EXID_AT91SAM9G15 0x00000000 +#define ARCH_EXID_AT91SAM9G35 0x00000001 +#define ARCH_EXID_AT91SAM9X35 0x00000002 +#define ARCH_EXID_AT91SAM9G25 0x00000003 +#define ARCH_EXID_AT91SAM9X25 0x00000004 + +#define cpu_is_at91sam9x5() (get_chip_id() == ARCH_ID_AT91SAM9X5) +#define cpu_is_at91sam9g15() (cpu_is_at91sam9x5() && \ + (get_extension_chip_id() == ARCH_EXID_AT91SAM9G15)) +#define cpu_is_at91sam9g25() (cpu_is_at91sam9x5() && \ + (get_extension_chip_id() == ARCH_EXID_AT91SAM9G25)) +#define cpu_is_at91sam9g35() (cpu_is_at91sam9x5() && \ + (get_extension_chip_id() == ARCH_EXID_AT91SAM9G35)) +#define cpu_is_at91sam9x25() (cpu_is_at91sam9x5() && \ + (get_extension_chip_id() == ARCH_EXID_AT91SAM9X25)) +#define cpu_is_at91sam9x35() (cpu_is_at91sam9x5() && \ + (get_extension_chip_id() == ARCH_EXID_AT91SAM9X35)) + +/* + * Cpu Name + */ +#define CONFIG_SYS_AT91_G15_CPU_NAME "AT91SAM9G15" +#define CONFIG_SYS_AT91_G25_CPU_NAME "AT91SAM9G25" +#define CONFIG_SYS_AT91_G35_CPU_NAME "AT91SAM9G35" +#define CONFIG_SYS_AT91_X25_CPU_NAME "AT91SAM9X25" +#define CONFIG_SYS_AT91_X35_CPU_NAME "AT91SAM9X35" +#define CONFIG_SYS_AT91_UNKNOWN_CPU "Unknown CPU type" +#define ATMEL_CPU_NAME get_cpu_name() + +/* + * Other misc defines + */ +#define ATMEL_PIO_PORTS 4 +#define CPU_HAS_PIO3 +#define PIO_SCDR_DIV (0x3fff << 0) /* Slow Clock Divider Mask */ + +/* + * at91sam9x5 specific prototypes + */ +#ifndef __ASSEMBLY__ +unsigned int get_chip_id(void); +unsigned int get_extension_chip_id(void); +unsigned int has_emac1(void); +unsigned int has_emac0(void); +unsigned int has_lcdc(void); +char *get_cpu_name(void); +#endif + +#endif diff --git a/arch/arm/include/asm/arch-at91/at91sam9x5_matrix.h b/arch/arm/include/asm/arch-at91/at91sam9x5_matrix.h new file mode 100644 index 0000000000..d6ce6fad55 --- /dev/null +++ b/arch/arm/include/asm/arch-at91/at91sam9x5_matrix.h @@ -0,0 +1,91 @@ +/* + * Matrix-centric header file for the AT91SAM9X5 family + * + * Copyright (C) 2012 Atmel Corporation. + * + * Memory Controllers (MATRIX, EBI) - System peripherals registers. + * Based on AT91SAM9X5 preliminary datasheet. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __AT91SAM9X5_MATRIX_H__ +#define __AT91SAM9X5_MATRIX_H__ + +#ifndef __ASSEMBLY__ + +struct at91_matrix { + u32 mcfg[16]; + u32 scfg[16]; + u32 pras[16][2]; + u32 mrcr; /* 0x100 Master Remap Control */ + u32 filler[7]; + u32 ebicsa; + u32 filler4[47]; + u32 wpmr; + u32 wpsr; +}; + +#endif /* __ASSEMBLY__ */ + +#define AT91_MATRIX_ULBT_INFINITE (0 << 0) +#define AT91_MATRIX_ULBT_SINGLE (1 << 0) +#define AT91_MATRIX_ULBT_FOUR (2 << 0) +#define AT91_MATRIX_ULBT_EIGHT (3 << 0) +#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0) +#define AT91_MATRIX_ULBT_THIRTYTWO (5 << 0) +#define AT91_MATRIX_ULBT_SIXTYFOUR (6 << 0) +#define AT91_MATRIX_ULBT_128 (7 << 0) + +#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16) +#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16) +#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16) +#define AT91_MATRIX_FIXED_DEFMSTR_SHIFT 18 + +#define AT91_MATRIX_M0PR_SHIFT 0 +#define AT91_MATRIX_M1PR_SHIFT 4 +#define AT91_MATRIX_M2PR_SHIFT 8 +#define AT91_MATRIX_M3PR_SHIFT 12 +#define AT91_MATRIX_M4PR_SHIFT 16 +#define AT91_MATRIX_M5PR_SHIFT 20 +#define AT91_MATRIX_M6PR_SHIFT 24 +#define AT91_MATRIX_M7PR_SHIFT 28 + +#define AT91_MATRIX_M8PR_SHIFT 0 /* register B */ +#define AT91_MATRIX_M9PR_SHIFT 4 /* register B */ +#define AT91_MATRIX_M10PR_SHIFT 8 /* register B */ +#define AT91_MATRIX_M11PR_SHIFT 12 /* register B */ + +#define AT91_MATRIX_RCB0 (1 << 0) +#define AT91_MATRIX_RCB1 (1 << 1) +#define AT91_MATRIX_RCB2 (1 << 2) +#define AT91_MATRIX_RCB3 (1 << 3) +#define AT91_MATRIX_RCB4 (1 << 4) +#define AT91_MATRIX_RCB5 (1 << 5) +#define AT91_MATRIX_RCB6 (1 << 6) +#define AT91_MATRIX_RCB7 (1 << 7) +#define AT91_MATRIX_RCB8 (1 << 8) +#define AT91_MATRIX_RCB9 (1 << 9) +#define AT91_MATRIX_RCB10 (1 << 10) + +#define AT91_MATRIX_EBI_CS1A_SMC (0 << 1) +#define AT91_MATRIX_EBI_CS1A_SDRAMC (1 << 1) +#define AT91_MATRIX_EBI_CS3A_SMC (0 << 3) +#define AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA (1 << 3) +#define AT91_MATRIX_EBI_DBPU_ON (0 << 8) +#define AT91_MATRIX_EBI_DBPU_OFF (1 << 8) +#define AT91_MATRIX_EBI_DBPD_ON (0 << 9) +#define AT91_MATRIX_EBI_DBPD_OFF (1 << 9) +#define AT91_MATRIX_EBI_VDDIOMSEL_1_8V (0 << 16) +#define AT91_MATRIX_EBI_VDDIOMSEL_3_3V (1 << 16) +#define AT91_MATRIX_EBI_EBI_IOSR_REDUCED (0 << 17) +#define AT91_MATRIX_EBI_EBI_IOSR_NORMAL (1 << 17) +#define AT91_MATRIX_NFD0_ON_D0 (0 << 24) +#define AT91_MATRIX_NFD0_ON_D16 (1 << 24) +#define AT91_MATRIX_MP_OFF (0 << 25) +#define AT91_MATRIX_MP_ON (1 << 25) + +#endif diff --git a/arch/arm/include/asm/arch-at91/hardware.h b/arch/arm/include/asm/arch-at91/hardware.h index 85c2889e5c..4c4ee703a6 100644 --- a/arch/arm/include/asm/arch-at91/hardware.h +++ b/arch/arm/include/asm/arch-at91/hardware.h @@ -37,6 +37,8 @@ # include <asm/arch/at91sam9rl.h> #elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) # include <asm/arch/at91sam9g45.h> +#elif defined(CONFIG_AT91SAM9X5) +# include <asm/arch/at91sam9x5.h> #elif defined(CONFIG_AT91CAP9) # include <asm/arch/at91cap9.h> #elif defined(CONFIG_AT91X40) diff --git a/arch/arm/include/asm/arch-bcm2835/gpio.h b/arch/arm/include/asm/arch-bcm2835/gpio.h new file mode 100644 index 0000000000..0e708560a6 --- /dev/null +++ b/arch/arm/include/asm/arch-bcm2835/gpio.h @@ -0,0 +1,66 @@ +/* + * Copyright (C) 2012 Vikram Narayananan + * <vikram186@gmail.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _BCM2835_GPIO_H_ +#define _BCM2835_GPIO_H_ + +#define BCM2835_GPIO_BASE 0x20200000 +#define BCM2835_GPIO_COUNT 54 + +#define BCM2835_GPIO_FSEL_MASK 0x7 +#define BCM2835_GPIO_INPUT 0x0 +#define BCM2835_GPIO_OUTPUT 0x1 +#define BCM2835_GPIO_ALT0 0x4 +#define BCM2835_GPIO_ALT1 0x5 +#define BCM2835_GPIO_ALT2 0x6 +#define BCM2835_GPIO_ALT3 0x7 +#define BCM2835_GPIO_ALT4 0x3 +#define BCM2835_GPIO_ALT5 0x2 + +#define BCM2835_GPIO_COMMON_BANK(gpio) ((gpio < 32) ? 0 : 1) +#define BCM2835_GPIO_COMMON_SHIFT(gpio) (gpio & 0x1f) + +#define BCM2835_GPIO_FSEL_BANK(gpio) (gpio / 10) +#define BCM2835_GPIO_FSEL_SHIFT(gpio) ((gpio % 10) * 3) + +struct bcm2835_gpio_regs { + u32 gpfsel[6]; + u32 reserved1; + u32 gpset[2]; + u32 reserved2; + u32 gpclr[2]; + u32 reserved3; + u32 gplev[2]; + u32 reserved4; + u32 gpeds[2]; + u32 reserved5; + u32 gpren[2]; + u32 reserved6; + u32 gpfen[2]; + u32 reserved7; + u32 gphen[2]; + u32 reserved8; + u32 gplen[2]; + u32 reserved9; + u32 gparen[2]; + u32 reserved10; + u32 gppud; + u32 gppudclk[2]; +}; + +#endif /* _BCM2835_GPIO_H_ */ diff --git a/arch/arm/include/asm/arch-bcm2835/timer.h b/arch/arm/include/asm/arch-bcm2835/timer.h new file mode 100644 index 0000000000..30c70e03df --- /dev/null +++ b/arch/arm/include/asm/arch-bcm2835/timer.h @@ -0,0 +1,37 @@ +/* + * (C) Copyright 2012 Stephen Warren + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _BCM2835_TIMER_H +#define _BCM2835_TIMER_H + +#define BCM2835_TIMER_PHYSADDR 0x20003000 + +struct bcm2835_timer_regs { + u32 cs; + u32 clo; + u32 chi; + u32 c0; + u32 c1; + u32 c2; + u32 c3; +}; + +#define BCM2835_TIMER_CS_M3 (1 << 3) +#define BCM2835_TIMER_CS_M2 (1 << 2) +#define BCM2835_TIMER_CS_M1 (1 << 1) +#define BCM2835_TIMER_CS_M0 (1 << 0) + +#endif diff --git a/arch/arm/include/asm/arch-bcm2835/wdog.h b/arch/arm/include/asm/arch-bcm2835/wdog.h new file mode 100644 index 0000000000..303a65f32e --- /dev/null +++ b/arch/arm/include/asm/arch-bcm2835/wdog.h @@ -0,0 +1,36 @@ +/* + * (C) Copyright 2012 Stephen Warren + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _BCM2835_TIMER_H +#define _BCM2835_TIMER_H + +#define BCM2835_WDOG_PHYSADDR 0x20100000 + +struct bcm2835_wdog_regs { + u32 unknown0[7]; + u32 rstc; + u32 unknown1; + u32 wdog; +}; + +#define BCM2835_WDOG_PASSWORD 0x5a000000 + +#define BCM2835_WDOG_RSTC_WRCFG_MASK 0x00000030 +#define BCM2835_WDOG_RSTC_WRCFG_FULL_RESET 0x00000020 + +#define BCM2835_WDOG_WDOG_TIMEOUT_MASK 0x0000ffff + +#endif diff --git a/arch/arm/include/asm/arch-davinci/da8xx-usb.h b/arch/arm/include/asm/arch-davinci/da8xx-usb.h new file mode 100644 index 0000000000..eb79bf8b90 --- /dev/null +++ b/arch/arm/include/asm/arch-davinci/da8xx-usb.h @@ -0,0 +1,105 @@ +/* + * da8xx-usb.h -- TI's DA8xx platform specific usb wrapper definitions. + * + * Author: Ajay Kumar Gupta <ajay.gupta@ti.com> + * + * Based on drivers/usb/musb/davinci.h + * + * Copyright (C) 2009 Texas Instruments Incorporated + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#ifndef __DA8XX_MUSB_H__ +#define __DA8XX_MUSB_H__ + +#include <asm/arch/hardware.h> +#include <asm/arch/gpio.h> + +/* Base address of da8xx usb0 wrapper */ +#define DA8XX_USB_OTG_BASE 0x01E00000 + +/* Base address of da8xx musb core */ +#define DA8XX_USB_OTG_CORE_BASE (DA8XX_USB_OTG_BASE + 0x400) + +/* Timeout for DA8xx usb module */ +#define DA8XX_USB_OTG_TIMEOUT 0x3FFFFFF + +/* + * DA8xx platform USB wrapper register overlay. + */ +struct da8xx_usb_regs { + dv_reg revision; + dv_reg control; + dv_reg status; + dv_reg emulation; + dv_reg mode; + dv_reg autoreq; + dv_reg srpfixtime; + dv_reg teardown; + dv_reg intsrc; + dv_reg intsrc_set; + dv_reg intsrc_clr; + dv_reg intmsk; + dv_reg intmsk_set; + dv_reg intmsk_clr; + dv_reg intsrcmsk; + dv_reg eoi; + dv_reg intvector; + dv_reg grndis_size[4]; +}; + +#define da8xx_usb_regs ((struct da8xx_usb_regs *)DA8XX_USB_OTG_BASE) + +/* DA8XX interrupt bits definitions */ +#define DA8XX_USB_TX_ENDPTS_MASK 0x1f /* ep0 + 4 tx */ +#define DA8XX_USB_RX_ENDPTS_MASK 0x1e /* 4 rx */ +#define DA8XX_USB_TXINT_SHIFT 0 +#define DA8XX_USB_RXINT_SHIFT 8 + +#define DA8XX_USB_USBINT_MASK 0x01ff0000 /* 8 Mentor, DRVVBUS */ +#define DA8XX_USB_TXINT_MASK \ + (DA8XX_USB_TX_ENDPTS_MASK << DA8XX_USB_TXINT_SHIFT) +#define DA8XX_USB_RXINT_MASK \ + (DA8XX_USB_RX_ENDPTS_MASK << DA8XX_USB_RXINT_SHIFT) + +/* DA8xx CFGCHIP2 (USB 2.0 PHY Control) register bits */ +#define CFGCHIP2_PHYCLKGD (1 << 17) +#define CFGCHIP2_VBUSSENSE (1 << 16) +#define CFGCHIP2_RESET (1 << 15) +#define CFGCHIP2_OTGMODE (3 << 13) +#define CFGCHIP2_NO_OVERRIDE (0 << 13) +#define CFGCHIP2_FORCE_HOST (1 << 13) +#define CFGCHIP2_FORCE_DEVICE (2 << 13) +#define CFGCHIP2_FORCE_HOST_VBUS_LOW (3 << 13) +#define CFGCHIP2_USB1PHYCLKMUX (1 << 12) +#define CFGCHIP2_USB2PHYCLKMUX (1 << 11) +#define CFGCHIP2_PHYPWRDN (1 << 10) +#define CFGCHIP2_OTGPWRDN (1 << 9) +#define CFGCHIP2_DATPOL (1 << 8) +#define CFGCHIP2_USB1SUSPENDM (1 << 7) +#define CFGCHIP2_PHY_PLLON (1 << 6) /* override PLL suspend */ +#define CFGCHIP2_SESENDEN (1 << 5) /* Vsess_end comparator */ +#define CFGCHIP2_VBDTCTEN (1 << 4) /* Vbus comparator */ +#define CFGCHIP2_REFFREQ (0xf << 0) +#define CFGCHIP2_REFFREQ_12MHZ (1 << 0) +#define CFGCHIP2_REFFREQ_24MHZ (2 << 0) +#define CFGCHIP2_REFFREQ_48MHZ (3 << 0) + +#define DA8XX_USB_VBUS_GPIO (1 << 15) + +int usb_phy_on(void); +void usb_phy_off(void); + +#endif /* __DA8XX_MUSB_H__ */ diff --git a/arch/arm/include/asm/arch-davinci/hardware.h b/arch/arm/include/asm/arch-davinci/hardware.h index b145c6e7f1..6eed6c95a7 100644 --- a/arch/arm/include/asm/arch-davinci/hardware.h +++ b/arch/arm/include/asm/arch-davinci/hardware.h @@ -306,6 +306,7 @@ typedef volatile unsigned int * dv_reg_p; void lpsc_on(unsigned int id); void lpsc_syncreset(unsigned int id); +void lpsc_disable(unsigned int id); void dsp_on(void); void davinci_enable_uart0(void); @@ -441,21 +442,51 @@ struct davinci_pllc_regs { #define davinci_pllc1_regs ((struct davinci_pllc_regs *)DAVINCI_PLL_CNTRL1_BASE) #define DAVINCI_PLLC_DIV_MASK 0x1f -#define ASYNC3 get_async3_src() -#define PLL1_SYSCLK2 ((1 << 16) | 0x2) -#define DAVINCI_SPI1_CLKID (cpu_is_da830() ? 2 : ASYNC3) -/* Clock IDs */ +/* + * A clock ID is a 32-bit number where bit 16 represents the PLL controller + * (clear is PLLC0, set is PLLC1) and the low 16 bits represent the divisor, + * counting from 1. Clock IDs may be passed to clk_get(). + */ + +/* flags to select PLL controller */ +#define DAVINCI_PLLC0_FLAG (0) +#define DAVINCI_PLLC1_FLAG (1 << 16) + enum davinci_clk_ids { - DAVINCI_SPI0_CLKID = 2, - DAVINCI_UART2_CLKID = 2, - DAVINCI_MMC_CLKID = 2, - DAVINCI_MDIO_CLKID = 4, - DAVINCI_ARM_CLKID = 6, - DAVINCI_PLLM_CLKID = 0xff, - DAVINCI_PLLC_CLKID = 0x100, - DAVINCI_AUXCLK_CLKID = 0x101 + /* + * Clock IDs for PLL outputs. Each may be switched on/off + * independently, and each may map to one or more peripherals. + */ + DAVINCI_PLL0_SYSCLK2 = DAVINCI_PLLC0_FLAG | 2, + DAVINCI_PLL0_SYSCLK4 = DAVINCI_PLLC0_FLAG | 4, + DAVINCI_PLL0_SYSCLK6 = DAVINCI_PLLC0_FLAG | 6, + DAVINCI_PLL1_SYSCLK1 = DAVINCI_PLLC1_FLAG | 1, + DAVINCI_PLL1_SYSCLK2 = DAVINCI_PLLC1_FLAG | 2, + + /* map peripherals to clock IDs */ + DAVINCI_ARM_CLKID = DAVINCI_PLL0_SYSCLK6, + DAVINCI_DDR_CLKID = DAVINCI_PLL1_SYSCLK1, + DAVINCI_MDIO_CLKID = DAVINCI_PLL0_SYSCLK4, + DAVINCI_MMC_CLKID = DAVINCI_PLL0_SYSCLK2, + DAVINCI_SPI0_CLKID = DAVINCI_PLL0_SYSCLK2, + DAVINCI_MMCSD_CLKID = DAVINCI_PLL0_SYSCLK2, + + /* special clock ID - output of PLL multiplier */ + DAVINCI_PLLM_CLKID = 0x0FF, + + /* special clock ID - output of PLL post divisor */ + DAVINCI_PLLC_CLKID = 0x100, + + /* special clock ID - PLL bypass */ + DAVINCI_AUXCLK_CLKID = 0x101, }; +#define DAVINCI_UART2_CLKID (cpu_is_da830() ? DAVINCI_PLL0_SYSCLK2 \ + : get_async3_src()) + +#define DAVINCI_SPI1_CLKID (cpu_is_da830() ? DAVINCI_PLL0_SYSCLK2 \ + : get_async3_src()) + int clk_get(enum davinci_clk_ids id); /* Boot config */ @@ -505,6 +536,7 @@ struct davinci_syscfg1_regs { ((struct davinci_syscfg1_regs *)DAVINCI_SYSCFG1_BASE) #define DDR_SLEW_CMOSEN_BIT 4 +#define DDR_SLEW_DDR_PDENA_BIT 5 #define VTP_POWERDWN (1 << 6) #define VTP_LOCK (1 << 7) @@ -570,10 +602,10 @@ static inline int cpu_is_da850(void) return ((part_no == 0xb7d1) ? 1 : 0); } -static inline int get_async3_src(void) +static inline enum davinci_clk_ids get_async3_src(void) { return (REG(&davinci_syscfg_regs->cfgchip3) & 0x10) ? - PLL1_SYSCLK2 : 2; + DAVINCI_PLL1_SYSCLK2 : DAVINCI_PLL0_SYSCLK2; } #endif /* CONFIG_SOC_DA8XX */ diff --git a/arch/arm/include/asm/arch-davinci/pinmux_defs.h b/arch/arm/include/asm/arch-davinci/pinmux_defs.h index 07aceaab03..a851f1f50f 100644 --- a/arch/arm/include/asm/arch-davinci/pinmux_defs.h +++ b/arch/arm/include/asm/arch-davinci/pinmux_defs.h @@ -28,6 +28,7 @@ extern const struct pinmux_config spi1_pins_base[3]; extern const struct pinmux_config spi1_pins_scs0[1]; /* UART pin muxer settings */ +extern const struct pinmux_config uart0_pins_txrx[2]; extern const struct pinmux_config uart1_pins_txrx[2]; extern const struct pinmux_config uart2_pins_txrx[2]; extern const struct pinmux_config uart2_pins_rtscts[2]; @@ -48,4 +49,7 @@ extern const struct pinmux_config emifa_pins_cs4[1]; extern const struct pinmux_config emifa_pins_nand[12]; extern const struct pinmux_config emifa_pins_nor[43]; +/* MMC pin muxer settings */ +extern const struct pinmux_config mmc0_pins[6]; + #endif diff --git a/arch/arm/include/asm/arch-exynos/clk.h b/arch/arm/include/asm/arch-exynos/clk.h index 72dc655ec1..552902573f 100644 --- a/arch/arm/include/asm/arch-exynos/clk.h +++ b/arch/arm/include/asm/arch-exynos/clk.h @@ -27,6 +27,7 @@ #define EPLL 2 #define HPLL 3 #define VPLL 4 +#define BPLL 5 unsigned long get_pll_clk(int pllreg); unsigned long get_arm_clk(void); diff --git a/arch/arm/include/asm/arch-exynos/clock.h b/arch/arm/include/asm/arch-exynos/clock.h index 50da958034..fce38efbb2 100644 --- a/arch/arm/include/asm/arch-exynos/clock.h +++ b/arch/arm/include/asm/arch-exynos/clock.h @@ -273,8 +273,7 @@ struct exynos5_clock { unsigned int clkout_cmu_cpu_div_stat; unsigned char res8[0x5f8]; unsigned int armclk_stopctrl; - unsigned int atclk_stopctrl; - unsigned char res9[0x8]; + unsigned char res9[0x0c]; unsigned int parityfail_status; unsigned int parityfail_clear; unsigned char res10[0x8]; @@ -323,259 +322,283 @@ struct exynos5_clock { unsigned char res19[0xf8]; unsigned int div_core0; unsigned int div_core1; - unsigned char res20[0xf8]; + unsigned int div_sysrgt; + unsigned char res20[0xf4]; unsigned int div_stat_core0; unsigned int div_stat_core1; - unsigned char res21[0x2f8]; + unsigned int div_stat_sysrgt; + unsigned char res21[0x2f4]; unsigned int gate_ip_core; - unsigned char res22[0xfc]; + unsigned int gate_ip_sysrgt; + unsigned char res22[0x8]; + unsigned int c2c_monitor; + unsigned char res23[0xec]; unsigned int clkout_cmu_core; unsigned int clkout_cmu_core_div_stat; - unsigned char res23[0x5f8]; + unsigned char res24[0x5f8]; unsigned int dcgidx_map0; unsigned int dcgidx_map1; unsigned int dcgidx_map2; - unsigned char res24[0x14]; + unsigned char res25[0x14]; unsigned int dcgperf_map0; unsigned int dcgperf_map1; - unsigned char res25[0x18]; + unsigned char res26[0x18]; unsigned int dvcidx_map; - unsigned char res26[0x1c]; + unsigned char res27[0x1c]; unsigned int freq_cpu; unsigned int freq_dpm; - unsigned char res27[0x18]; + unsigned char res28[0x18]; unsigned int dvsemclk_en; unsigned int maxperf; - unsigned char res28[0x3478]; + unsigned char res29[0xf78]; + unsigned int c2c_config; + unsigned char res30[0x24fc]; unsigned int div_acp; - unsigned char res29[0xfc]; + unsigned char res31[0xfc]; unsigned int div_stat_acp; - unsigned char res30[0x1fc]; + unsigned char res32[0x1fc]; unsigned int gate_ip_acp; - unsigned char res31[0x1fc]; + unsigned char res33[0xfc]; + unsigned int div_syslft; + unsigned char res34[0xc]; + unsigned int div_stat_syslft; + unsigned char res35[0x1c]; + unsigned int gate_ip_syslft; + unsigned char res36[0xcc]; unsigned int clkout_cmu_acp; unsigned int clkout_cmu_acp_div_stat; - unsigned char res32[0x38f8]; + unsigned char res37[0x8]; + unsigned int ufmc_config; + unsigned char res38[0x38ec]; unsigned int div_isp0; unsigned int div_isp1; unsigned int div_isp2; - unsigned char res33[0xf4]; + unsigned char res39[0xf4]; unsigned int div_stat_isp0; unsigned int div_stat_isp1; unsigned int div_stat_isp2; - unsigned char res34[0x3f4]; + unsigned char res40[0x3f4]; unsigned int gate_ip_isp0; unsigned int gate_ip_isp1; - unsigned char res35[0xf8]; + unsigned char res41[0xf8]; unsigned int gate_sclk_isp; - unsigned char res36[0xc]; + unsigned char res42[0xc]; unsigned int mcuisp_pwr_ctrl; - unsigned char res37[0xec]; + unsigned char res43[0xec]; unsigned int clkout_cmu_isp; unsigned int clkout_cmu_isp_div_stat; - unsigned char res38[0x3618]; + unsigned char res44[0x3618]; unsigned int cpll_lock; - unsigned char res39[0xc]; + unsigned char res45[0xc]; unsigned int epll_lock; - unsigned char res40[0xc]; + unsigned char res46[0xc]; unsigned int vpll_lock; - unsigned char res41[0xdc]; + unsigned char res47[0xc]; + unsigned int gpll_lock; + unsigned char res48[0xcc]; unsigned int cpll_con0; unsigned int cpll_con1; - unsigned char res42[0x8]; + unsigned char res49[0x8]; unsigned int epll_con0; unsigned int epll_con1; unsigned int epll_con2; - unsigned char res43[0x4]; + unsigned char res50[0x4]; unsigned int vpll_con0; unsigned int vpll_con1; unsigned int vpll_con2; - unsigned char res44[0xc4]; + unsigned char res51[0x4]; + unsigned int gpll_con0; + unsigned int gpll_con1; + unsigned char res52[0xb8]; unsigned int src_top0; unsigned int src_top1; unsigned int src_top2; unsigned int src_top3; unsigned int src_gscl; - unsigned int src_disp0_0; - unsigned int src_disp0_1; + unsigned char res53[0x8]; unsigned int src_disp1_0; - unsigned int src_disp1_1; - unsigned char res46[0xc]; + unsigned char res54[0x10]; unsigned int src_mau; unsigned int src_fsys; - unsigned char res47[0x8]; + unsigned int src_gen; + unsigned char res55[0x4]; unsigned int src_peric0; unsigned int src_peric1; - unsigned char res48[0x18]; + unsigned char res56[0x18]; unsigned int sclk_src_isp; - unsigned char res49[0x9c]; + unsigned char res57[0x9c]; unsigned int src_mask_top; - unsigned char res50[0xc]; + unsigned char res58[0xc]; unsigned int src_mask_gscl; - unsigned int src_mask_disp0_0; - unsigned int src_mask_disp0_1; + unsigned char res59[0x8]; unsigned int src_mask_disp1_0; - unsigned int src_mask_disp1_1; - unsigned int src_mask_maudio; - unsigned char res52[0x8]; + unsigned char res60[0x4]; + unsigned int src_mask_mau; + unsigned char res61[0x8]; unsigned int src_mask_fsys; - unsigned char res53[0xc]; + unsigned int src_mask_gen; + unsigned char res62[0x8]; unsigned int src_mask_peric0; unsigned int src_mask_peric1; - unsigned char res54[0x18]; + unsigned char res63[0x18]; unsigned int src_mask_isp; - unsigned char res55[0x9c]; + unsigned char res67[0x9c]; unsigned int mux_stat_top0; unsigned int mux_stat_top1; unsigned int mux_stat_top2; unsigned int mux_stat_top3; - unsigned char res56[0xf0]; + unsigned char res68[0xf0]; unsigned int div_top0; unsigned int div_top1; - unsigned char res57[0x8]; + unsigned char res69[0x8]; unsigned int div_gscl; - unsigned int div_disp0_0; - unsigned int div_disp0_1; + unsigned char res70[0x8]; unsigned int div_disp1_0; - unsigned int div_disp1_1; - unsigned char res59[0x8]; + unsigned char res71[0xc]; unsigned int div_gen; - unsigned char res60[0x4]; + unsigned char res72[0x4]; unsigned int div_mau; unsigned int div_fsys0; unsigned int div_fsys1; unsigned int div_fsys2; - unsigned int div_fsys3; + unsigned char res73[0x4]; unsigned int div_peric0; unsigned int div_peric1; unsigned int div_peric2; unsigned int div_peric3; unsigned int div_peric4; unsigned int div_peric5; - unsigned char res61[0x10]; + unsigned char res74[0x10]; unsigned int sclk_div_isp; - unsigned char res62[0xc]; + unsigned char res75[0xc]; unsigned int div2_ratio0; unsigned int div2_ratio1; - unsigned char res63[0x8]; + unsigned char res76[0x8]; unsigned int div4_ratio; - unsigned char res64[0x6c]; + unsigned char res77[0x6c]; unsigned int div_stat_top0; unsigned int div_stat_top1; - unsigned char res65[0x8]; + unsigned char res78[0x8]; unsigned int div_stat_gscl; - unsigned int div_stat_disp0_0; - unsigned int div_stat_disp0_1; + unsigned char res79[0x8]; unsigned int div_stat_disp1_0; - unsigned int div_stat_disp1_1; - unsigned char res67[0x8]; + unsigned char res80[0xc]; unsigned int div_stat_gen; - unsigned char res68[0x4]; - unsigned int div_stat_maudio; + unsigned char res81[0x4]; + unsigned int div_stat_mau; unsigned int div_stat_fsys0; unsigned int div_stat_fsys1; unsigned int div_stat_fsys2; - unsigned int div_stat_fsys3; + unsigned char res82[0x4]; unsigned int div_stat_peric0; unsigned int div_stat_peric1; unsigned int div_stat_peric2; unsigned int div_stat_peric3; unsigned int div_stat_peric4; unsigned int div_stat_peric5; - unsigned char res69[0x10]; + unsigned char res83[0x10]; unsigned int sclk_div_stat_isp; - unsigned char res70[0xc]; + unsigned char res84[0xc]; unsigned int div2_stat0; unsigned int div2_stat1; - unsigned char res71[0x8]; + unsigned char res85[0x8]; unsigned int div4_stat; - unsigned char res72[0x180]; - unsigned int gate_top_sclk_disp0; + unsigned char res86[0x184]; unsigned int gate_top_sclk_disp1; unsigned int gate_top_sclk_gen; - unsigned char res74[0xc]; + unsigned char res87[0xc]; unsigned int gate_top_sclk_mau; unsigned int gate_top_sclk_fsys; - unsigned char res75[0xc]; + unsigned char res88[0xc]; unsigned int gate_top_sclk_peric; - unsigned char res76[0x1c]; + unsigned char res89[0x1c]; unsigned int gate_top_sclk_isp; - unsigned char res77[0xac]; + unsigned char res90[0xac]; unsigned int gate_ip_gscl; - unsigned int gate_ip_disp0; + unsigned char res91[0x4]; unsigned int gate_ip_disp1; unsigned int gate_ip_mfc; unsigned int gate_ip_g3d; unsigned int gate_ip_gen; - unsigned char res79[0xc]; + unsigned char res92[0xc]; unsigned int gate_ip_fsys; - unsigned char res80[0x4]; - unsigned int gate_ip_gps; + unsigned char res93[0x8]; unsigned int gate_ip_peric; - unsigned char res81[0xc]; + unsigned char res94[0xc]; unsigned int gate_ip_peris; - unsigned char res82[0x1c]; + unsigned char res95[0x1c]; unsigned int gate_block; - unsigned char res83[0x7c]; + unsigned char res96[0x1c]; + unsigned int mcuiop_pwr_ctrl; + unsigned char res97[0x5c]; unsigned int clkout_cmu_top; unsigned int clkout_cmu_top_div_stat; - unsigned char res84[0x37f8]; + unsigned char res98[0x37f8]; unsigned int src_lex; - unsigned char res85[0x2fc]; + unsigned char res99[0x1fc]; + unsigned int mux_stat_lex; + unsigned char res100[0xfc]; unsigned int div_lex; - unsigned char res86[0xfc]; + unsigned char res101[0xfc]; unsigned int div_stat_lex; - unsigned char res87[0x1fc]; + unsigned char res102[0x1fc]; unsigned int gate_ip_lex; - unsigned char res88[0x1fc]; + unsigned char res103[0x1fc]; unsigned int clkout_cmu_lex; unsigned int clkout_cmu_lex_div_stat; - unsigned char res89[0x3af8]; + unsigned char res104[0x3af8]; unsigned int div_r0x; - unsigned char res90[0xfc]; + unsigned char res105[0xfc]; unsigned int div_stat_r0x; - unsigned char res91[0x1fc]; + unsigned char res106[0x1fc]; unsigned int gate_ip_r0x; - unsigned char res92[0x1fc]; + unsigned char res107[0x1fc]; unsigned int clkout_cmu_r0x; unsigned int clkout_cmu_r0x_div_stat; - unsigned char res94[0x3af8]; + unsigned char res108[0x3af8]; unsigned int div_r1x; - unsigned char res95[0xfc]; + unsigned char res109[0xfc]; unsigned int div_stat_r1x; - unsigned char res96[0x1fc]; + unsigned char res110[0x1fc]; unsigned int gate_ip_r1x; - unsigned char res97[0x1fc]; + unsigned char res111[0x1fc]; unsigned int clkout_cmu_r1x; unsigned int clkout_cmu_r1x_div_stat; - unsigned char res98[0x3608]; + unsigned char res112[0x3608]; unsigned int bpll_lock; - unsigned char res99[0xfc]; + unsigned char res113[0xfc]; unsigned int bpll_con0; unsigned int bpll_con1; - unsigned char res100[0xe8]; + unsigned char res114[0xe8]; unsigned int src_cdrex; - unsigned char res101[0x1fc]; + unsigned char res115[0x1fc]; unsigned int mux_stat_cdrex; - unsigned char res102[0xfc]; + unsigned char res116[0xfc]; unsigned int div_cdrex; - unsigned int div_cdrex2; - unsigned char res103[0xf8]; + unsigned char res117[0xfc]; unsigned int div_stat_cdrex; - unsigned char res104[0x2fc]; + unsigned char res118[0x2fc]; unsigned int gate_ip_cdrex; - unsigned char res105[0xc]; - unsigned int c2c_monitor; - unsigned int dmc_pwr_ctrl; - unsigned char res106[0x4]; + unsigned char res119[0x10]; + unsigned int dmc_freq_ctrl; + unsigned char res120[0x4]; unsigned int drex2_pause; - unsigned char res107[0xe0]; + unsigned char res121[0xe0]; unsigned int clkout_cmu_cdrex; unsigned int clkout_cmu_cdrex_div_stat; - unsigned char res108[0x8]; + unsigned char res122[0x8]; unsigned int lpddr3phy_ctrl; - unsigned char res109[0xf5f8]; + unsigned int lpddr3phy_con0; + unsigned int lpddr3phy_con1; + unsigned int lpddr3phy_con2; + unsigned int lpddr3phy_con3; + unsigned int pll_div2_sel; + unsigned char res123[0xf5d8]; }; #endif +#define MPLL_FOUT_SEL_SHIFT 4 +#define MPLL_FOUT_SEL_MASK 0x1 +#define BPLL_FOUT_SEL_SHIFT 0 +#define BPLL_FOUT_SEL_MASK 0x1 #endif diff --git a/arch/arm/include/asm/arch-exynos/cpu.h b/arch/arm/include/asm/arch-exynos/cpu.h index 0e6ea87079..2cd4ae1526 100644 --- a/arch/arm/include/asm/arch-exynos/cpu.h +++ b/arch/arm/include/asm/arch-exynos/cpu.h @@ -56,6 +56,7 @@ #define EXYNOS4_USBPHY_CONTROL 0x10020704 #define EXYNOS4_GPIO_PART4_BASE DEVICE_NOT_AVAILABLE +#define EXYNOS4_DP_BASE DEVICE_NOT_AVAILABLE /* EXYNOS5 */ #define EXYNOS5_I2C_SPACING 0x10000 @@ -83,6 +84,7 @@ #define EXYNOS5_PWMTIMER_BASE 0x12DD0000 #define EXYNOS5_GPIO_PART2_BASE 0x13400000 #define EXYNOS5_FIMD_BASE 0x14400000 +#define EXYNOS5_DP_BASE 0x145B0000 #define EXYNOS5_ADC_BASE DEVICE_NOT_AVAILABLE #define EXYNOS5_MODEM_BASE DEVICE_NOT_AVAILABLE @@ -150,6 +152,7 @@ static inline unsigned int samsung_get_base_##device(void) \ SAMSUNG_BASE(adc, ADC_BASE) SAMSUNG_BASE(clock, CLOCK_BASE) +SAMSUNG_BASE(dp, DP_BASE) SAMSUNG_BASE(sysreg, SYSREG_BASE) SAMSUNG_BASE(fimd, FIMD_BASE) SAMSUNG_BASE(i2c, I2C_BASE) diff --git a/arch/arm/include/asm/arch-exynos/dmc.h b/arch/arm/include/asm/arch-exynos/dmc.h index bd52d16c9d..f65c676cc5 100644 --- a/arch/arm/include/asm/arch-exynos/dmc.h +++ b/arch/arm/include/asm/arch-exynos/dmc.h @@ -251,5 +251,70 @@ struct exynos5_phy_control { unsigned int phy_con41; unsigned int phy_con42; }; + +enum ddr_mode { + DDR_MODE_DDR2, + DDR_MODE_DDR3, + DDR_MODE_LPDDR2, + DDR_MODE_LPDDR3, + + DDR_MODE_COUNT, +}; + +enum mem_manuf { + MEM_MANUF_AUTODETECT, + MEM_MANUF_ELPIDA, + MEM_MANUF_SAMSUNG, + + MEM_MANUF_COUNT, +}; + +/* CONCONTROL register fields */ +#define CONCONTROL_DFI_INIT_START_SHIFT 28 +#define CONCONTROL_RD_FETCH_SHIFT 12 +#define CONCONTROL_RD_FETCH_MASK (0x7 << CONCONTROL_RD_FETCH_SHIFT) +#define CONCONTROL_AREF_EN_SHIFT 5 + +/* PRECHCONFIG register field */ +#define PRECHCONFIG_TP_CNT_SHIFT 24 + +/* PWRDNCONFIG register field */ +#define PWRDNCONFIG_DPWRDN_CYC_SHIFT 0 +#define PWRDNCONFIG_DSREF_CYC_SHIFT 16 + +/* PHY_CON0 register fields */ +#define PHY_CON0_T_WRRDCMD_SHIFT 17 +#define PHY_CON0_T_WRRDCMD_MASK (0x7 << PHY_CON0_T_WRRDCMD_SHIFT) +#define PHY_CON0_CTRL_DDR_MODE_SHIFT 11 + +/* PHY_CON1 register fields */ +#define PHY_CON1_RDLVL_RDDATA_ADJ_SHIFT 0 + +/* PHY_CON12 register fields */ +#define PHY_CON12_CTRL_START_POINT_SHIFT 24 +#define PHY_CON12_CTRL_INC_SHIFT 16 +#define PHY_CON12_CTRL_FORCE_SHIFT 8 +#define PHY_CON12_CTRL_START_SHIFT 6 +#define PHY_CON12_CTRL_START_MASK (1 << PHY_CON12_CTRL_START_SHIFT) +#define PHY_CON12_CTRL_DLL_ON_SHIFT 5 +#define PHY_CON12_CTRL_DLL_ON_MASK (1 << PHY_CON12_CTRL_DLL_ON_SHIFT) +#define PHY_CON12_CTRL_REF_SHIFT 1 + +/* PHY_CON16 register fields */ +#define PHY_CON16_ZQ_MODE_DDS_SHIFT 24 +#define PHY_CON16_ZQ_MODE_DDS_MASK (0x7 << PHY_CON16_ZQ_MODE_DDS_SHIFT) + +#define PHY_CON16_ZQ_MODE_TERM_SHIFT 21 +#define PHY_CON16_ZQ_MODE_TERM_MASK (0x7 << PHY_CON16_ZQ_MODE_TERM_SHIFT) + +#define PHY_CON16_ZQ_MODE_NOTERM_MASK (1 << 19) + +/* PHY_CON42 register fields */ +#define PHY_CON42_CTRL_BSTLEN_SHIFT 8 +#define PHY_CON42_CTRL_BSTLEN_MASK (0xff << PHY_CON42_CTRL_BSTLEN_SHIFT) + +#define PHY_CON42_CTRL_RDLAT_SHIFT 0 +#define PHY_CON42_CTRL_RDLAT_MASK (0x1f << PHY_CON42_CTRL_RDLAT_SHIFT) + #endif #endif diff --git a/arch/arm/include/asm/arch-exynos/dp.h b/arch/arm/include/asm/arch-exynos/dp.h new file mode 100644 index 0000000000..69c65f7a76 --- /dev/null +++ b/arch/arm/include/asm/arch-exynos/dp.h @@ -0,0 +1,751 @@ +/* + * Copyright (C) 2012 Samsung Electronics + * + * Author: Donghwa Lee <dh09.lee@samsung.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __ASM_ARM_ARCH_DP_H_ +#define __ASM_ARM_ARCH_DP_H_ + +#ifndef __ASSEMBLY__ + +struct exynos_dp { + unsigned char res1[0x10]; + unsigned int tx_version; + unsigned int tx_sw_reset; + unsigned int func_en1; + unsigned int func_en2; + unsigned int video_ctl1; + unsigned int video_ctl2; + unsigned int video_ctl3; + unsigned int video_ctl4; + unsigned int color_blue_cb; + unsigned int color_green_y; + unsigned int color_red_cr; + unsigned int video_ctl8; + unsigned char res2[0x4]; + unsigned int video_ctl10; + unsigned int total_ln_cfg_l; + unsigned int total_ln_cfg_h; + unsigned int active_ln_cfg_l; + unsigned int active_ln_cfg_h; + unsigned int vfp_cfg; + unsigned int vsw_cfg; + unsigned int vbp_cfg; + unsigned int total_pix_cfg_l; + unsigned int total_pix_cfg_h; + unsigned int active_pix_cfg_l; + unsigned int active_pix_cfg_h; + unsigned int hfp_cfg_l; + unsigned int hfp_cfg_h; + unsigned int hsw_cfg_l; + unsigned int hsw_cfg_h; + unsigned int hbp_cfg_l; + unsigned int hbp_cfg_h; + unsigned int video_status; + unsigned int total_ln_sta_l; + unsigned int total_ln_sta_h; + unsigned int active_ln_sta_l; + unsigned int active_ln_sta_h; + + unsigned int vfp_sta; + unsigned int vsw_sta; + unsigned int vbp_sta; + + unsigned int total_pix_sta_l; + unsigned int total_pix_sta_h; + unsigned int active_pix_sta_l; + unsigned int active_pix_sta_h; + + unsigned int hfp_sta_l; + unsigned int hfp_sta_h; + unsigned int hsw_sta_l; + unsigned int hsw_sta_h; + unsigned int hbp_sta_l; + unsigned int hbp_sta_h; + + unsigned char res3[0x288]; + + unsigned int lane_map; + unsigned char res4[0x10]; + unsigned int analog_ctl1; + unsigned int analog_ctl2; + unsigned int analog_ctl3; + + unsigned int pll_filter_ctl1; + unsigned int amp_tuning_ctl; + unsigned char res5[0xc]; + + unsigned int aux_hw_retry_ctl; + unsigned char res6[0x2c]; + unsigned int int_state; + unsigned int common_int_sta1; + unsigned int common_int_sta2; + unsigned int common_int_sta3; + unsigned int common_int_sta4; + unsigned char res7[0x8]; + + unsigned int int_sta; + unsigned char res8[0x1c]; + unsigned int int_ctl; + unsigned char res9[0x200]; + unsigned int sys_ctl1; + unsigned int sys_ctl2; + unsigned int sys_ctl3; + unsigned int sys_ctl4; + unsigned int vid_ctl; + unsigned char res10[0x2c]; + unsigned int pkt_send_ctl; + unsigned char res[0x4]; + unsigned int hdcp_ctl; + unsigned char res11[0x34]; + unsigned int link_bw_set; + + unsigned int lane_count_set; + unsigned int training_ptn_set; + unsigned int ln0_link_training_ctl; + unsigned int ln1_link_training_ctl; + unsigned int ln2_link_training_ctl; + unsigned int ln3_link_training_ctl; + unsigned int dn_spread_ctl; + unsigned int hw_link_training_ctl; + unsigned char res12[0x1c]; + + unsigned int debug_ctl; + unsigned int hpd_deglitch_l; + unsigned int hpd_deglitch_h; + + unsigned char res13[0x14]; + unsigned int link_debug_ctl; + + unsigned char res14[0x1c]; + + unsigned int m_vid0; + unsigned int m_vid1; + unsigned int m_vid2; + unsigned int n_vid0; + unsigned int n_vid1; + unsigned int n_vid2; + unsigned int m_vid_mon; + unsigned int pll_ctl; + unsigned int phy_pd; + unsigned int phy_test; + unsigned char res15[0x8]; + + unsigned int video_fifo_thrd; + unsigned char res16[0x8]; + unsigned int audio_margin; + + unsigned int dn_spread_ctl1; + unsigned int dn_spread_ctl2; + unsigned char res17[0x18]; + unsigned int m_cal_ctl; + unsigned int m_vid_gen_filter_th; + unsigned char res18[0x10]; + unsigned int m_aud_gen_filter_th; + unsigned char res50[0x4]; + + unsigned int aux_ch_sta; + unsigned int aux_err_num; + unsigned int aux_ch_defer_ctl; + unsigned int aux_rx_comm; + unsigned int buffer_data_ctl; + + unsigned int aux_ch_ctl1; + unsigned int aux_addr_7_0; + unsigned int aux_addr_15_8; + unsigned int aux_addr_19_16; + unsigned int aux_ch_ctl2; + unsigned char res19[0x18]; + unsigned int buf_data0; + unsigned char res20[0x3c]; + + unsigned int soc_general_ctl; + unsigned char res21[0x8c]; + unsigned int crc_con; + unsigned int crc_result; + unsigned char res22[0x8]; + + unsigned int common_int_mask1; + unsigned int common_int_mask2; + unsigned int common_int_mask3; + unsigned int common_int_mask4; + unsigned int int_sta_mask1; + unsigned int int_sta_mask2; + unsigned int int_sta_mask3; + unsigned int int_sta_mask4; + unsigned int int_sta_mask; + unsigned int crc_result2; + unsigned int scrambler_reset_cnt; + + unsigned int pn_inv; + unsigned int psr_config; + unsigned int psr_command0; + unsigned int psr_command1; + unsigned int psr_crc_mon0; + unsigned int psr_crc_mon1; + + unsigned char res24[0x30]; + unsigned int phy_bist_ctrl; + unsigned char res25[0xc]; + unsigned int phy_ctrl; + unsigned char res26[0x1c]; + unsigned int test_pattern_gen_en; + unsigned int test_pattern_gen_ctrl; +}; + +#endif /* __ASSEMBLY__ */ + +/* For DP VIDEO CTL 1 */ +#define VIDEO_EN_MASK (0x01 << 7) +#define VIDEO_MUTE_MASK (0x01 << 6) + +/* For DP VIDEO CTL 4 */ +#define VIDEO_BIST_MASK (0x1 << 3) + +/* EXYNOS_DP_ANALOG_CTL_1 */ +#define SEL_BG_NEW_BANDGAP (0x0 << 6) +#define SEL_BG_INTERNAL_RESISTOR (0x1 << 6) +#define TX_TERMINAL_CTRL_73_OHM (0x0 << 4) +#define TX_TERMINAL_CTRL_61_OHM (0x1 << 4) +#define TX_TERMINAL_CTRL_50_OHM (0x2 << 4) +#define TX_TERMINAL_CTRL_45_OHM (0x3 << 4) +#define SWING_A_30PER_G_INCREASE (0x1 << 3) +#define SWING_A_30PER_G_NORMAL (0x0 << 3) + +/* EXYNOS_DP_ANALOG_CTL_2 */ +#define CPREG_BLEED (0x1 << 4) +#define SEL_24M (0x1 << 3) +#define TX_DVDD_BIT_1_0000V (0x3 << 0) +#define TX_DVDD_BIT_1_0625V (0x4 << 0) +#define TX_DVDD_BIT_1_1250V (0x5 << 0) + +/* EXYNOS_DP_ANALOG_CTL_3 */ +#define DRIVE_DVDD_BIT_1_0000V (0x3 << 5) +#define DRIVE_DVDD_BIT_1_0625V (0x4 << 5) +#define DRIVE_DVDD_BIT_1_1250V (0x5 << 5) +#define SEL_CURRENT_DEFAULT (0x0 << 3) +#define VCO_BIT_000_MICRO (0x0 << 0) +#define VCO_BIT_200_MICRO (0x1 << 0) +#define VCO_BIT_300_MICRO (0x2 << 0) +#define VCO_BIT_400_MICRO (0x3 << 0) +#define VCO_BIT_500_MICRO (0x4 << 0) +#define VCO_BIT_600_MICRO (0x5 << 0) +#define VCO_BIT_700_MICRO (0x6 << 0) +#define VCO_BIT_900_MICRO (0x7 << 0) + +/* EXYNOS_DP_PLL_FILTER_CTL_1 */ +#define PD_RING_OSC (0x1 << 6) +#define AUX_TERMINAL_CTRL_52_OHM (0x3 << 4) +#define AUX_TERMINAL_CTRL_69_OHM (0x2 << 4) +#define AUX_TERMINAL_CTRL_102_OHM (0x1 << 4) +#define AUX_TERMINAL_CTRL_200_OHM (0x0 << 4) +#define TX_CUR1_1X (0x0 << 2) +#define TX_CUR1_2X (0x1 << 2) +#define TX_CUR1_3X (0x2 << 2) +#define TX_CUR_1_MA (0x0 << 0) +#define TX_CUR_2_MA (0x1 << 0) +#define TX_CUR_3_MA (0x2 << 0) +#define TX_CUR_4_MA (0x3 << 0) + +/* EXYNOS_DP_PLL_FILTER_CTL_2 */ +#define CH3_AMP_0_MV (0x3 << 12) +#define CH2_AMP_0_MV (0x3 << 8) +#define CH1_AMP_0_MV (0x3 << 4) +#define CH0_AMP_0_MV (0x3 << 0) + +/* EXYNOS_DP_PLL_CTL */ +#define DP_PLL_PD (0x1 << 7) +#define DP_PLL_RESET (0x1 << 6) +#define DP_PLL_LOOP_BIT_DEFAULT (0x1 << 4) +#define DP_PLL_REF_BIT_1_1250V (0x5 << 0) +#define DP_PLL_REF_BIT_1_2500V (0x7 << 0) + +/* EXYNOS_DP_INT_CTL */ +#define SOFT_INT_CTRL (0x1 << 2) +#define INT_POL (0x1 << 0) + +/* DP TX SW RESET */ +#define RESET_DP_TX (0x01 << 0) + +/* DP FUNC_EN_1 */ +#define MASTER_VID_FUNC_EN_N (0x1 << 7) +#define SLAVE_VID_FUNC_EN_N (0x1 << 5) +#define AUD_FIFO_FUNC_EN_N (0x1 << 4) +#define AUD_FUNC_EN_N (0x1 << 3) +#define HDCP_FUNC_EN_N (0x1 << 2) +#define CRC_FUNC_EN_N (0x1 << 1) +#define SW_FUNC_EN_N (0x1 << 0) + +/* DP FUNC_EN_2 */ +#define SSC_FUNC_EN_N (0x1 << 7) +#define AUX_FUNC_EN_N (0x1 << 2) +#define SERDES_FIFO_FUNC_EN_N (0x1 << 1) +#define LS_CLK_DOMAIN_FUNC_EN_N (0x1 << 0) + +/* EXYNOS_DP_PHY_PD */ +#define PHY_PD (0x1 << 5) +#define AUX_PD (0x1 << 4) +#define CH3_PD (0x1 << 3) +#define CH2_PD (0x1 << 2) +#define CH1_PD (0x1 << 1) +#define CH0_PD (0x1 << 0) + +/* EXYNOS_DP_COMMON_INT_STA_1 */ +#define VSYNC_DET (0x1 << 7) +#define PLL_LOCK_CHG (0x1 << 6) +#define SPDIF_ERR (0x1 << 5) +#define SPDIF_UNSTBL (0x1 << 4) +#define VID_FORMAT_CHG (0x1 << 3) +#define AUD_CLK_CHG (0x1 << 2) +#define VID_CLK_CHG (0x1 << 1) +#define SW_INT (0x1 << 0) + +/* EXYNOS_DP_DEBUG_CTL */ +#define PLL_LOCK (0x1 << 4) +#define F_PLL_LOCK (0x1 << 3) +#define PLL_LOCK_CTRL (0x1 << 2) + +/* EXYNOS_DP_FUNC_EN_2 */ +#define SSC_FUNC_EN_N (0x1 << 7) +#define AUX_FUNC_EN_N (0x1 << 2) +#define SERDES_FIFO_FUNC_EN_N (0x1 << 1) +#define LS_CLK_DOMAIN_FUNC_EN_N (0x1 << 0) + +/* EXYNOS_DP_COMMON_INT_STA_4 */ +#define PSR_ACTIVE (0x1 << 7) +#define PSR_INACTIVE (0x1 << 6) +#define SPDIF_BI_PHASE_ERR (0x1 << 5) +#define HOTPLUG_CHG (0x1 << 2) +#define HPD_LOST (0x1 << 1) +#define PLUG (0x1 << 0) + +/* EXYNOS_DP_INT_STA */ +#define INT_HPD (0x1 << 6) +#define HW_TRAINING_FINISH (0x1 << 5) +#define RPLY_RECEIV (0x1 << 1) +#define AUX_ERR (0x1 << 0) + +/* EXYNOS_DP_SYS_CTL_3 */ +#define HPD_STATUS (0x1 << 6) +#define F_HPD (0x1 << 5) +#define HPD_CTRL (0x1 << 4) +#define HDCP_RDY (0x1 << 3) +#define STRM_VALID (0x1 << 2) +#define F_VALID (0x1 << 1) +#define VALID_CTRL (0x1 << 0) + +/* EXYNOS_DP_AUX_HW_RETRY_CTL */ +#define AUX_BIT_PERIOD_EXPECTED_DELAY(x) (((x) & 0x7) << 8) +#define AUX_HW_RETRY_INTERVAL_MASK (0x3 << 3) +#define AUX_HW_RETRY_INTERVAL_600_MICROSECONDS (0x0 << 3) +#define AUX_HW_RETRY_INTERVAL_800_MICROSECONDS (0x1 << 3) +#define AUX_HW_RETRY_INTERVAL_1000_MICROSECONDS (0x2 << 3) +#define AUX_HW_RETRY_INTERVAL_1800_MICROSECONDS (0x3 << 3) +#define AUX_HW_RETRY_COUNT_SEL(x) (((x) & 0x7) << 0) + +/* EXYNOS_DP_AUX_CH_DEFER_CTL */ +#define DEFER_CTRL_EN (0x1 << 7) +#define DEFER_COUNT(x) (((x) & 0x7f) << 0) + +#define COMMON_INT_MASK_1 (0) +#define COMMON_INT_MASK_2 (0) +#define COMMON_INT_MASK_3 (0) +#define COMMON_INT_MASK_4 (0) +#define INT_STA_MASK (0) + +/* EXYNOS_DP_BUFFER_DATA_CTL */ +#define BUF_CLR (0x1 << 7) +#define BUF_DATA_COUNT(x) (((x) & 0x1f) << 0) + +/* EXYNOS_DP_AUX_ADDR_7_0 */ +#define AUX_ADDR_7_0(x) (((x) >> 0) & 0xff) + +/* EXYNOS_DP_AUX_ADDR_15_8 */ +#define AUX_ADDR_15_8(x) (((x) >> 8) & 0xff) + +/* EXYNOS_DP_AUX_ADDR_19_16 */ +#define AUX_ADDR_19_16(x) (((x) >> 16) & 0x0f) + +/* EXYNOS_DP_AUX_CH_CTL_1 */ +#define AUX_LENGTH(x) (((x - 1) & 0xf) << 4) +#define AUX_TX_COMM_MASK (0xf << 0) +#define AUX_TX_COMM_DP_TRANSACTION (0x1 << 3) +#define AUX_TX_COMM_I2C_TRANSACTION (0x0 << 3) +#define AUX_TX_COMM_MOT (0x1 << 2) +#define AUX_TX_COMM_WRITE (0x0 << 0) +#define AUX_TX_COMM_READ (0x1 << 0) + +/* EXYNOS_DP_AUX_CH_CTL_2 */ +#define ADDR_ONLY (0x1 << 1) +#define AUX_EN (0x1 << 0) + +/* EXYNOS_DP_AUX_CH_STA */ +#define AUX_BUSY (0x1 << 4) +#define AUX_STATUS_MASK (0xf << 0) + +/* EXYNOS_DP_AUX_RX_COMM */ +#define AUX_RX_COMM_I2C_DEFER (0x2 << 2) +#define AUX_RX_COMM_AUX_DEFER (0x2 << 0) + +/* EXYNOS_DP_PHY_TEST */ +#define MACRO_RST (0x1 << 5) +#define CH1_TEST (0x1 << 1) +#define CH0_TEST (0x1 << 0) + +/* EXYNOS_DP_TRAINING_PTN_SET */ +#define SCRAMBLER_TYPE (0x1 << 9) +#define HW_LINK_TRAINING_PATTERN (0x1 << 8) +#define SCRAMBLING_DISABLE (0x1 << 5) +#define SCRAMBLING_ENABLE (0x0 << 5) +#define LINK_QUAL_PATTERN_SET_MASK (0x3 << 2) +#define LINK_QUAL_PATTERN_SET_PRBS7 (0x3 << 2) +#define LINK_QUAL_PATTERN_SET_D10_2 (0x1 << 2) +#define LINK_QUAL_PATTERN_SET_DISABLE (0x0 << 2) +#define SW_TRAINING_PATTERN_SET_MASK (0x3 << 0) +#define SW_TRAINING_PATTERN_SET_PTN2 (0x2 << 0) +#define SW_TRAINING_PATTERN_SET_PTN1 (0x1 << 0) +#define SW_TRAINING_PATTERN_SET_NORMAL (0x0 << 0) + +/* EXYNOS_DP_TOTAL_LINE_CFG */ +#define TOTAL_LINE_CFG_L(x) ((x) & 0xff) +#define TOTAL_LINE_CFG_H(x) ((((x) >> 8)) & 0xff) +#define ACTIVE_LINE_CFG_L(x) ((x) & 0xff) +#define ACTIVE_LINE_CFG_H(x) (((x) >> 8) & 0xff) +#define TOTAL_PIXEL_CFG_L(x) ((x) & 0xff) +#define TOTAL_PIXEL_CFG_H(x) ((((x) >> 8)) & 0xff) +#define ACTIVE_PIXEL_CFG_L(x) ((x) & 0xff) +#define ACTIVE_PIXEL_CFG_H(x) ((((x) >> 8)) & 0xff) + +#define H_F_PORCH_CFG_L(x) ((x) & 0xff) +#define H_F_PORCH_CFG_H(x) ((((x) >> 8)) & 0xff) +#define H_SYNC_PORCH_CFG_L(x) ((x) & 0xff) +#define H_SYNC_PORCH_CFG_H(x) ((((x) >> 8)) & 0xff) +#define H_B_PORCH_CFG_L(x) ((x) & 0xff) +#define H_B_PORCH_CFG_H(x) ((((x) >> 8)) & 0xff) + +/* EXYNOS_DP_LN0_LINK_TRAINING_CTL */ +#define MAX_PRE_EMPHASIS_REACH_0 (0x1 << 5) +#define PRE_EMPHASIS_SET_0_SET(x) (((x) & 0x3) << 3) +#define PRE_EMPHASIS_SET_0_GET(x) (((x) >> 3) & 0x3) +#define PRE_EMPHASIS_SET_0_MASK (0x3 << 3) +#define PRE_EMPHASIS_SET_0_SHIFT (3) +#define PRE_EMPHASIS_SET_0_LEVEL_3 (0x3 << 3) +#define PRE_EMPHASIS_SET_0_LEVEL_2 (0x2 << 3) +#define PRE_EMPHASIS_SET_0_LEVEL_1 (0x1 << 3) +#define PRE_EMPHASIS_SET_0_LEVEL_0 (0x0 << 3) +#define MAX_DRIVE_CURRENT_REACH_0 (0x1 << 2) +#define DRIVE_CURRENT_SET_0_MASK (0x3 << 0) +#define DRIVE_CURRENT_SET_0_SET(x) (((x) & 0x3) << 0) +#define DRIVE_CURRENT_SET_0_GET(x) (((x) >> 0) & 0x3) +#define DRIVE_CURRENT_SET_0_LEVEL_3 (0x3 << 0) +#define DRIVE_CURRENT_SET_0_LEVEL_2 (0x2 << 0) +#define DRIVE_CURRENT_SET_0_LEVEL_1 (0x1 << 0) +#define DRIVE_CURRENT_SET_0_LEVEL_0 (0x0 << 0) + +/* EXYNOS_DP_LN1_LINK_TRAINING_CTL */ +#define MAX_PRE_EMPHASIS_REACH_1 (0x1 << 5) +#define PRE_EMPHASIS_SET_1_SET(x) (((x) & 0x3) << 3) +#define PRE_EMPHASIS_SET_1_GET(x) (((x) >> 3) & 0x3) +#define PRE_EMPHASIS_SET_1_MASK (0x3 << 3) +#define PRE_EMPHASIS_SET_1_SHIFT (3) +#define PRE_EMPHASIS_SET_1_LEVEL_3 (0x3 << 3) +#define PRE_EMPHASIS_SET_1_LEVEL_2 (0x2 << 3) +#define PRE_EMPHASIS_SET_1_LEVEL_1 (0x1 << 3) +#define PRE_EMPHASIS_SET_1_LEVEL_0 (0x0 << 3) +#define MAX_DRIVE_CURRENT_REACH_1 (0x1 << 2) +#define DRIVE_CURRENT_SET_1_MASK (0x3 << 0) +#define DRIVE_CURRENT_SET_1_SET(x) (((x) & 0x3) << 0) +#define DRIVE_CURRENT_SET_1_GET(x) (((x) >> 0) & 0x3) +#define DRIVE_CURRENT_SET_1_LEVEL_3 (0x3 << 0) +#define DRIVE_CURRENT_SET_1_LEVEL_2 (0x2 << 0) +#define DRIVE_CURRENT_SET_1_LEVEL_1 (0x1 << 0) +#define DRIVE_CURRENT_SET_1_LEVEL_0 (0x0 << 0) + +/* EXYNOS_DP_LN2_LINK_TRAINING_CTL */ +#define MAX_PRE_EMPHASIS_REACH_2 (0x1 << 5) +#define PRE_EMPHASIS_SET_2_SET(x) (((x) & 0x3) << 3) +#define PRE_EMPHASIS_SET_2_GET(x) (((x) >> 3) & 0x3) +#define PRE_EMPHASIS_SET_2_MASK (0x3 << 3) +#define PRE_EMPHASIS_SET_2_SHIFT (3) +#define PRE_EMPHASIS_SET_2_LEVEL_3 (0x3 << 3) +#define PRE_EMPHASIS_SET_2_LEVEL_2 (0x2 << 3) +#define PRE_EMPHASIS_SET_2_LEVEL_1 (0x1 << 3) +#define PRE_EMPHASIS_SET_2_LEVEL_0 (0x0 << 3) +#define MAX_DRIVE_CURRENT_REACH_2 (0x1 << 2) +#define DRIVE_CURRENT_SET_2_MASK (0x3 << 0) +#define DRIVE_CURRENT_SET_2_SET(x) (((x) & 0x3) << 0) +#define DRIVE_CURRENT_SET_2_GET(x) (((x) >> 0) & 0x3) +#define DRIVE_CURRENT_SET_2_LEVEL_3 (0x3 << 0) +#define DRIVE_CURRENT_SET_2_LEVEL_2 (0x2 << 0) +#define DRIVE_CURRENT_SET_2_LEVEL_1 (0x1 << 0) +#define DRIVE_CURRENT_SET_2_LEVEL_0 (0x0 << 0) + +/* EXYNOS_DP_LN3_LINK_TRAINING_CTL */ +#define MAX_PRE_EMPHASIS_REACH_3 (0x1 << 5) +#define PRE_EMPHASIS_SET_3_SET(x) (((x) & 0x3) << 3) +#define PRE_EMPHASIS_SET_3_GET(x) (((x) >> 3) & 0x3) +#define PRE_EMPHASIS_SET_3_MASK (0x3 << 3) +#define PRE_EMPHASIS_SET_3_SHIFT (3) +#define PRE_EMPHASIS_SET_3_LEVEL_3 (0x3 << 3) +#define PRE_EMPHASIS_SET_3_LEVEL_2 (0x2 << 3) +#define PRE_EMPHASIS_SET_3_LEVEL_1 (0x1 << 3) +#define PRE_EMPHASIS_SET_3_LEVEL_0 (0x0 << 3) +#define MAX_DRIVE_CURRENT_REACH_3 (0x1 << 2) +#define DRIVE_CURRENT_SET_3_MASK (0x3 << 0) +#define DRIVE_CURRENT_SET_3_SET(x) (((x) & 0x3) << 0) +#define DRIVE_CURRENT_SET_3_GET(x) (((x) >> 0) & 0x3) +#define DRIVE_CURRENT_SET_3_LEVEL_3 (0x3 << 0) +#define DRIVE_CURRENT_SET_3_LEVEL_2 (0x2 << 0) +#define DRIVE_CURRENT_SET_3_LEVEL_1 (0x1 << 0) +#define DRIVE_CURRENT_SET_3_LEVEL_0 (0x0 << 0) + +/* EXYNOS_DP_VIDEO_CTL_10 */ +#define FORMAT_SEL (0x1 << 4) +#define INTERACE_SCAN_CFG (0x1 << 2) +#define INTERACE_SCAN_CFG_SHIFT (2) +#define VSYNC_POLARITY_CFG (0x1 << 1) +#define V_S_POLARITY_CFG_SHIFT (1) +#define HSYNC_POLARITY_CFG (0x1 << 0) +#define H_S_POLARITY_CFG_SHIFT (0) + +/* EXYNOS_DP_SOC_GENERAL_CTL */ +#define AUDIO_MODE_SPDIF_MODE (0x1 << 8) +#define AUDIO_MODE_MASTER_MODE (0x0 << 8) +#define MASTER_VIDEO_INTERLACE_EN (0x1 << 4) +#define VIDEO_MASTER_CLK_SEL (0x1 << 2) +#define VIDEO_MASTER_MODE_EN (0x1 << 1) +#define VIDEO_MODE_MASK (0x1 << 0) +#define VIDEO_MODE_SLAVE_MODE (0x1 << 0) +#define VIDEO_MODE_MASTER_MODE (0x0 << 0) + +/* EXYNOS_DP_VIDEO_CTL_1 */ +#define VIDEO_EN (0x1 << 7) +#define HDCP_VIDEO_MUTE (0x1 << 6) + +/* EXYNOS_DP_VIDEO_CTL_2 */ +#define IN_D_RANGE_MASK (0x1 << 7) +#define IN_D_RANGE_SHIFT (7) +#define IN_D_RANGE_CEA (0x1 << 7) +#define IN_D_RANGE_VESA (0x0 << 7) +#define IN_BPC_MASK (0x7 << 4) +#define IN_BPC_SHIFT (4) +#define IN_BPC_12_BITS (0x3 << 4) +#define IN_BPC_10_BITS (0x2 << 4) +#define IN_BPC_8_BITS (0x1 << 4) +#define IN_BPC_6_BITS (0x0 << 4) +#define IN_COLOR_F_MASK (0x3 << 0) +#define IN_COLOR_F_SHIFT (0) +#define IN_COLOR_F_YCBCR444 (0x2 << 0) +#define IN_COLOR_F_YCBCR422 (0x1 << 0) +#define IN_COLOR_F_RGB (0x0 << 0) + +/* EXYNOS_DP_VIDEO_CTL_3 */ +#define IN_YC_COEFFI_MASK (0x1 << 7) +#define IN_YC_COEFFI_SHIFT (7) +#define IN_YC_COEFFI_ITU709 (0x1 << 7) +#define IN_YC_COEFFI_ITU601 (0x0 << 7) +#define VID_CHK_UPDATE_TYPE_MASK (0x1 << 4) +#define VID_CHK_UPDATE_TYPE_SHIFT (4) +#define VID_CHK_UPDATE_TYPE_1 (0x1 << 4) +#define VID_CHK_UPDATE_TYPE_0 (0x0 << 4) + +/* EXYNOS_DP_TEST_PATTERN_GEN_EN */ +#define TEST_PATTERN_GEN_EN (0x1 << 0) +#define TEST_PATTERN_GEN_DIS (0x0 << 0) + +/* EXYNOS_DP_TEST_PATTERN_GEN_CTRL */ +#define TEST_PATTERN_MODE_COLOR_SQUARE (0x3 << 0) +#define TEST_PATTERN_MODE_BALCK_WHITE_V_LINES (0x2 << 0) +#define TEST_PATTERN_MODE_COLOR_RAMP (0x1 << 0) + +/* EXYNOS_DP_VIDEO_CTL_4 */ +#define BIST_EN (0x1 << 3) +#define BIST_WIDTH_MASK (0x1 << 2) +#define BIST_WIDTH_BAR_32_PIXEL (0x0 << 2) +#define BIST_WIDTH_BAR_64_PIXEL (0x1 << 2) +#define BIST_TYPE_MASK (0x3 << 0) +#define BIST_TYPE_COLOR_BAR (0x0 << 0) +#define BIST_TYPE_WHITE_GRAY_BLACK_BAR (0x1 << 0) +#define BIST_TYPE_MOBILE_WHITE_BAR (0x2 << 0) + +/* EXYNOS_DP_SYS_CTL_1 */ +#define DET_STA (0x1 << 2) +#define FORCE_DET (0x1 << 1) +#define DET_CTRL (0x1 << 0) + +/* EXYNOS_DP_SYS_CTL_2 */ +#define CHA_CRI(x) (((x) & 0xf) << 4) +#define CHA_STA (0x1 << 2) +#define FORCE_CHA (0x1 << 1) +#define CHA_CTRL (0x1 << 0) + +/* EXYNOS_DP_SYS_CTL_3 */ +#define HPD_STATUS (0x1 << 6) +#define F_HPD (0x1 << 5) +#define HPD_CTRL (0x1 << 4) +#define HDCP_RDY (0x1 << 3) +#define STRM_VALID (0x1 << 2) +#define F_VALID (0x1 << 1) +#define VALID_CTRL (0x1 << 0) + +/* EXYNOS_DP_SYS_CTL_4 */ +#define FIX_M_AUD (0x1 << 4) +#define ENHANCED (0x1 << 3) +#define FIX_M_VID (0x1 << 2) +#define M_VID_UPDATE_CTRL (0x3 << 0) + +/* EXYNOS_M_VID_X */ +#define M_VID0_CFG(x) ((x) & 0xff) +#define M_VID1_CFG(x) (((x) >> 8) & 0xff) +#define M_VID2_CFG(x) (((x) >> 16) & 0xff) + +/* EXYNOS_M_VID_X */ +#define N_VID0_CFG(x) ((x) & 0xff) +#define N_VID1_CFG(x) (((x) >> 8) & 0xff) +#define N_VID2_CFG(x) (((x) >> 16) & 0xff) + +/* DPCD_TRAINING_PATTERN_SET */ +#define DPCD_SCRAMBLING_DISABLED (0x1 << 5) +#define DPCD_SCRAMBLING_ENABLED (0x0 << 5) +#define DPCD_TRAINING_PATTERN_2 (0x2 << 0) +#define DPCD_TRAINING_PATTERN_1 (0x1 << 0) +#define DPCD_TRAINING_PATTERN_DISABLED (0x0 << 0) + +/* Definition for DPCD Register */ +#define DPCD_DPCD_REV (0x0000) +#define DPCD_MAX_LINK_RATE (0x0001) +#define DPCD_MAX_LANE_COUNT (0x0002) +#define DPCD_LINK_BW_SET (0x0100) +#define DPCD_LANE_COUNT_SET (0x0101) +#define DPCD_TRAINING_PATTERN_SET (0x0102) +#define DPCD_TRAINING_LANE0_SET (0x0103) +#define DPCD_LANE0_1_STATUS (0x0202) +#define DPCD_LN_ALIGN_UPDATED (0x0204) +#define DPCD_ADJUST_REQUEST_LANE0_1 (0x0206) +#define DPCD_ADJUST_REQUEST_LANE2_3 (0x0207) +#define DPCD_TEST_REQUEST (0x0218) +#define DPCD_TEST_RESPONSE (0x0260) +#define DPCD_TEST_EDID_CHECKSUM (0x0261) +#define DPCD_SINK_POWER_STATE (0x0600) + +/* DPCD_TEST_REQUEST */ +#define DPCD_TEST_EDID_READ (0x1 << 2) + +/* DPCD_TEST_RESPONSE */ +#define DPCD_TEST_EDID_CHECKSUM_WRITE (0x1 << 2) + +/* DPCD_SINK_POWER_STATE */ +#define DPCD_SET_POWER_STATE_D0 (0x1 << 0) +#define DPCD_SET_POWER_STATE_D4 (0x2 << 0) + +/* I2C EDID Chip ID, Slave Address */ +#define I2C_EDID_DEVICE_ADDR (0x50) +#define I2C_E_EDID_DEVICE_ADDR (0x30) +#define EDID_BLOCK_LENGTH (0x80) +#define EDID_HEADER_PATTERN (0x00) +#define EDID_EXTENSION_FLAG (0x7e) +#define EDID_CHECKSUM (0x7f) + +/* DPCD_LANE0_1_STATUS */ +#define DPCD_LANE1_SYMBOL_LOCKED (0x1 << 6) +#define DPCD_LANE1_CHANNEL_EQ_DONE (0x1 << 5) +#define DPCD_LANE1_CR_DONE (0x1 << 4) +#define DPCD_LANE0_SYMBOL_LOCKED (0x1 << 2) +#define DPCD_LANE0_CHANNEL_EQ_DONE (0x1 << 1) +#define DPCD_LANE0_CR_DONE (0x1 << 0) + +/* DPCD_ADJUST_REQUEST_LANE0_1 */ +#define DPCD_PRE_EMPHASIS_LANE1_MASK (0x3 << 6) +#define DPCD_PRE_EMPHASIS_LANE1(x) (((x) >> 6) & 0x3) +#define DPCD_PRE_EMPHASIS_LANE1_LEVEL_3 (0x3 << 6) +#define DPCD_PRE_EMPHASIS_LANE1_LEVEL_2 (0x2 << 6) +#define DPCD_PRE_EMPHASIS_LANE1_LEVEL_1 (0x1 << 6) +#define DPCD_PRE_EMPHASIS_LANE1_LEVEL_0 (0x0 << 6) +#define DPCD_VOLTAGE_SWING_LANE1_MASK (0x3 << 4) +#define DPCD_VOLTAGE_SWING_LANE1(x) (((x) >> 4) & 0x3) +#define DPCD_VOLTAGE_SWING_LANE1_LEVEL_3 (0x3 << 4) +#define DPCD_VOLTAGE_SWING_LANE1_LEVEL_2 (0x2 << 4) +#define DPCD_VOLTAGE_SWING_LANE1_LEVEL_1 (0x1 << 4) +#define DPCD_VOLTAGE_SWING_LANE1_LEVEL_0 (0x0 << 4) +#define DPCD_PRE_EMPHASIS_LANE0_MASK (0x3 << 2) +#define DPCD_PRE_EMPHASIS_LANE0(x) (((x) >> 2) & 0x3) +#define DPCD_PRE_EMPHASIS_LANE0_LEVEL_3 (0x3 << 2) +#define DPCD_PRE_EMPHASIS_LANE0_LEVEL_2 (0x2 << 2) +#define DPCD_PRE_EMPHASIS_LANE0_LEVEL_1 (0x1 << 2) +#define DPCD_PRE_EMPHASIS_LANE0_LEVEL_0 (0x0 << 2) +#define DPCD_VOLTAGE_SWING_LANE0_MASK (0x3 << 0) +#define DPCD_VOLTAGE_SWING_LANE0(x) (((x) >> 0) & 0x3) +#define DPCD_VOLTAGE_SWING_LANE0_LEVEL_3 (0x3 << 0) +#define DPCD_VOLTAGE_SWING_LANE0_LEVEL_2 (0x2 << 0) +#define DPCD_VOLTAGE_SWING_LANE0_LEVEL_1 (0x1 << 0) +#define DPCD_VOLTAGE_SWING_LANE0_LEVEL_0 (0x0 << 0) + +/* DPCD_ADJUST_REQUEST_LANE2_3 */ +#define DPCD_PRE_EMPHASIS_LANE2_MASK (0x3 << 6) +#define DPCD_PRE_EMPHASIS_LANE2(x) (((x) >> 6) & 0x3) +#define DPCD_PRE_EMPHASIS_LANE2_LEVEL_3 (0x3 << 6) +#define DPCD_PRE_EMPHASIS_LANE2_LEVEL_2 (0x2 << 6) +#define DPCD_PRE_EMPHASIS_LANE2_LEVEL_1 (0x1 << 6) +#define DPCD_PRE_EMPHASIS_LANE2_LEVEL_0 (0x0 << 6) +#define DPCD_VOLTAGE_SWING_LANE2_MASK (0x3 << 4) +#define DPCD_VOLTAGE_SWING_LANE2(x) (((x) >> 4) & 0x3) +#define DPCD_VOLTAGE_SWING_LANE2_LEVEL_3 (0x3 << 4) +#define DPCD_VOLTAGE_SWING_LANE2_LEVEL_2 (0x2 << 4) +#define DPCD_VOLTAGE_SWING_LANE2_LEVEL_1 (0x1 << 4) +#define DPCD_VOLTAGE_SWING_LANE2_LEVEL_0 (0x0 << 4) +#define DPCD_PRE_EMPHASIS_LANE3_MASK (0x3 << 2) +#define DPCD_PRE_EMPHASIS_LANE3(x) (((x) >> 2) & 0x3) +#define DPCD_PRE_EMPHASIS_LANE3_LEVEL_3 (0x3 << 2) +#define DPCD_PRE_EMPHASIS_LANE3_LEVEL_2 (0x2 << 2) +#define DPCD_PRE_EMPHASIS_LANE3_LEVEL_1 (0x1 << 2) +#define DPCD_PRE_EMPHASIS_LANE3_LEVEL_0 (0x0 << 2) +#define DPCD_VOLTAGE_SWING_LANE3_MASK (0x3 << 0) +#define DPCD_VOLTAGE_SWING_LANE3(x) (((x) >> 0) & 0x3) +#define DPCD_VOLTAGE_SWING_LANE3_LEVEL_3 (0x3 << 0) +#define DPCD_VOLTAGE_SWING_LANE3_LEVEL_2 (0x2 << 0) +#define DPCD_VOLTAGE_SWING_LANE3_LEVEL_1 (0x1 << 0) +#define DPCD_VOLTAGE_SWING_LANE3_LEVEL_0 (0x0 << 0) + +/* DPCD_LANE_COUNT_SET */ +#define DPCD_ENHANCED_FRAME_EN (0x1 << 7) +#define DPCD_LN_COUNT_SET(x) ((x) & 0x1f) + +/* DPCD_LANE_ALIGN__STATUS_UPDATED */ +#define DPCD_LINK_STATUS_UPDATED (0x1 << 7) +#define DPCD_DOWNSTREAM_PORT_STATUS_CHANGED (0x1 << 6) +#define DPCD_INTERLANE_ALIGN_DONE (0x1 << 0) + +/* DPCD_TRAINING_LANE0_SET */ +#define DPCD_PRE_EMPHASIS_SET_PATTERN_2_LEVEL_3 (0x3 << 3) +#define DPCD_PRE_EMPHASIS_SET_PATTERN_2_LEVEL_2 (0x2 << 3) +#define DPCD_PRE_EMPHASIS_SET_PATTERN_2_LEVEL_1 (0x1 << 3) +#define DPCD_PRE_EMPHASIS_SET_PATTERN_2_LEVEL_0 (0x0 << 3) +#define DPCD_VOLTAGE_SWING_SET_PATTERN_1_LEVEL_3 (0x3 << 0) +#define DPCD_VOLTAGE_SWING_SET_PATTERN_1_LEVEL_2 (0x2 << 0) +#define DPCD_VOLTAGE_SWING_SET_PATTERN_1_LEVEL_1 (0x1 << 0) +#define DPCD_VOLTAGE_SWING_SET_PATTERN_1_LEVEL_0 (0x0 << 0) + +#define DPCD_REQ_ADJ_SWING (0x00) +#define DPCD_REQ_ADJ_EMPHASIS (0x01) + +#define DP_LANE_STAT_CR_DONE (0x01 << 0) +#define DP_LANE_STAT_CE_DONE (0x01 << 1) +#define DP_LANE_STAT_SYM_LOCK (0x01 << 2) + +#endif diff --git a/arch/arm/include/asm/arch-exynos/dp_info.h b/arch/arm/include/asm/arch-exynos/dp_info.h new file mode 100644 index 0000000000..35694980fa --- /dev/null +++ b/arch/arm/include/asm/arch-exynos/dp_info.h @@ -0,0 +1,214 @@ +/* + * Copyright (C) 2012 Samsung Electronics + * + * Author: Donghwa Lee <dh09.lee@samsung.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _DP_INFO_H +#define _DP_INFO_H + +#define msleep(a) udelay(a * 1000) + +#define DP_TIMEOUT_LOOP_COUNT 100 +#define MAX_CR_LOOP 5 +#define MAX_EQ_LOOP 4 + +#define EXYNOS_DP_SUCCESS 0 + +enum { + DP_DISABLE, + DP_ENABLE, +}; + +struct edp_disp_info { + char *name; + unsigned int h_total; + unsigned int h_res; + unsigned int h_sync_width; + unsigned int h_back_porch; + unsigned int h_front_porch; + unsigned int v_total; + unsigned int v_res; + unsigned int v_sync_width; + unsigned int v_back_porch; + unsigned int v_front_porch; + + unsigned int v_sync_rate; +}; + +struct edp_link_train_info { + unsigned int lt_status; + + unsigned int ep_loop; + unsigned int cr_loop[4]; + +}; + +struct edp_video_info { + unsigned int master_mode; + unsigned int bist_mode; + unsigned int bist_pattern; + + unsigned int h_sync_polarity; + unsigned int v_sync_polarity; + unsigned int interlaced; + + unsigned int color_space; + unsigned int dynamic_range; + unsigned int ycbcr_coeff; + unsigned int color_depth; +}; + +struct edp_device_info { + struct edp_disp_info disp_info; + struct edp_link_train_info lt_info; + struct edp_video_info video_info; + + /*below info get from panel during training*/ + unsigned char lane_bw; + unsigned char lane_cnt; + unsigned char dpcd_rev; + /*support enhanced frame cap */ + unsigned char dpcd_efc; +}; + +enum analog_power_block { + AUX_BLOCK, + CH0_BLOCK, + CH1_BLOCK, + CH2_BLOCK, + CH3_BLOCK, + ANALOG_TOTAL, + POWER_ALL +}; + +enum pll_status { + PLL_UNLOCKED = 0, + PLL_LOCKED +}; + +enum { + COLOR_RGB, + COLOR_YCBCR422, + COLOR_YCBCR444 +}; + +enum { + VESA, + CEA +}; + +enum { + COLOR_YCBCR601, + COLOR_YCBCR709 +}; + +enum { + COLOR_6, + COLOR_8, + COLOR_10, + COLOR_12 +}; + +enum { + DP_LANE_BW_1_62 = 0x06, + DP_LANE_BW_2_70 = 0x0a, +}; + +enum { + DP_LANE_CNT_1 = 1, + DP_LANE_CNT_2 = 2, + DP_LANE_CNT_4 = 4, +}; + +enum { + DP_DPCD_REV_10 = 0x10, + DP_DPCD_REV_11 = 0x11, +}; + +enum { + DP_LT_NONE, + DP_LT_START, + DP_LT_CR, + DP_LT_ET, + DP_LT_FINISHED, + DP_LT_FAIL, +}; + +enum { + PRE_EMPHASIS_LEVEL_0, + PRE_EMPHASIS_LEVEL_1, + PRE_EMPHASIS_LEVEL_2, + PRE_EMPHASIS_LEVEL_3, +}; + +enum { + PRBS7, + D10_2, + TRAINING_PTN1, + TRAINING_PTN2, + DP_NONE +}; + +enum { + VOLTAGE_LEVEL_0, + VOLTAGE_LEVEL_1, + VOLTAGE_LEVEL_2, + VOLTAGE_LEVEL_3, +}; + +enum pattern_type { + NO_PATTERN, + COLOR_RAMP, + BALCK_WHITE_V_LINES, + COLOR_SQUARE, + INVALID_PATTERN, + COLORBAR_32, + COLORBAR_64, + WHITE_GRAY_BALCKBAR_32, + WHITE_GRAY_BALCKBAR_64, + MOBILE_WHITEBAR_32, + MOBILE_WHITEBAR_64 +}; + +enum { + CALCULATED_M, + REGISTER_M +}; + +enum { + VIDEO_TIMING_FROM_CAPTURE, + VIDEO_TIMING_FROM_REGISTER +}; + + +struct exynos_dp_platform_data { + struct edp_device_info *edp_dev_info; + void (*phy_enable)(unsigned int); +}; + +#ifdef CONFIG_EXYNOS_DP +unsigned int exynos_init_dp(void); +#else +unsigned int exynos_init_dp(void) +{ + return 0; +} +#endif + +#endif /* _DP_INFO_H */ diff --git a/arch/arm/include/asm/arch-exynos/fb.h b/arch/arm/include/asm/arch-exynos/fb.h index b10b0da07e..01445afde9 100644 --- a/arch/arm/include/asm/arch-exynos/fb.h +++ b/arch/arm/include/asm/arch-exynos/fb.h @@ -23,7 +23,7 @@ #define __ASM_ARM_ARCH_FB_H_ #ifndef __ASSEMBLY__ -struct exynos4_fb { +struct exynos_fb { unsigned int vidcon0; unsigned int vidcon1; unsigned int vidcon2; @@ -151,9 +151,23 @@ struct exynos4_fb { unsigned char res15[156]; unsigned int dualrgb; + unsigned char res16[16]; + unsigned int dp_mie_clkcon; }; #endif +/* LCD IF register offset */ +#define EXYNOS4_LCD_IF_BASE_OFFSET 0x0 +#define EXYNOS5_LCD_IF_BASE_OFFSET 0x20000 + +static inline unsigned int exynos_fimd_get_base_offset(void) +{ + if (cpu_is_exynos5()) + return EXYNOS5_LCD_IF_BASE_OFFSET; + else + return EXYNOS4_LCD_IF_BASE_OFFSET; +} + /* * Register offsets */ @@ -253,6 +267,8 @@ struct exynos4_fb { /* VIDTCON2 */ #define EXYNOS_VIDTCON2_LINEVAL(x) (((x) & 0x7ff) << 11) #define EXYNOS_VIDTCON2_HOZVAL(x) (((x) & 0x7ff) << 0) +#define EXYNOS_VIDTCON2_LINEVAL_E(x) ((((x) & 0x800) >> 11) << 23) +#define EXYNOS_VIDTCON2_HOZVAL_E(x) ((((x) & 0x800) >> 11) << 22) /* Window 0~4 Control - WINCONx */ #define EXYNOS_WINCON_DATAPATH_DMA (0 << 22) @@ -330,6 +346,8 @@ struct exynos4_fb { #define EXYNOS_VIDOSD_TOP_Y(x) (((x) & 0x7ff) << 0) #define EXYNOS_VIDOSD_RIGHT_X(x) (((x) & 0x7ff) << 11) #define EXYNOS_VIDOSD_BOTTOM_Y(x) (((x) & 0x7ff) << 0) +#define EXYNOS_VIDOSD_RIGHT_X_E(x) (((x) & 0x1) << 23) +#define EXYNOS_VIDOSD_BOTTOM_Y_E(x) (((x) & 0x1) << 22) /* VIDOSD0C, VIDOSDxD */ #define EXYNOS_VIDOSD_SIZE(x) (((x) & 0xffffff) << 0) @@ -354,6 +372,8 @@ struct exynos4_fb { /* Buffer Size */ #define EXYNOS_VIDADDR_OFFSIZE(x) (((x) & 0x1fff) << 13) #define EXYNOS_VIDADDR_PAGEWIDTH(x) (((x) & 0x1fff) << 0) +#define EXYNOS_VIDADDR_OFFSIZE_E(x) ((((x) & 0x2000) >> 13) << 27) +#define EXYNOS_VIDADDR_PAGEWIDTH_E(x) ((((x) & 0x2000) >> 13) << 26) /* WIN Color Map */ #define EXYNOS_WINMAP_COLOR(x) ((x) & 0xffffff) @@ -443,4 +463,9 @@ struct exynos4_fb { #define EXYNOS_I80START_TRIG (1 << 1) #define EXYNOS_I80STATUS_TRIG_DONE (1 << 2) +/* DP_MIE_CLKCON */ +#define EXYNOS_DP_MIE_DISABLE (0 << 0) +#define EXYNOS_DP_CLK_ENABLE (1 << 1) +#define EXYNOS_MIE_CLK_ENABLE (3 << 0) + #endif /* _REGS_FB_H */ diff --git a/arch/arm/include/asm/arch-exynos/gpio.h b/arch/arm/include/asm/arch-exynos/gpio.h index 7a9bb90a0c..97be4eac05 100644 --- a/arch/arm/include/asm/arch-exynos/gpio.h +++ b/arch/arm/include/asm/arch-exynos/gpio.h @@ -100,7 +100,9 @@ struct exynos5_gpio_part1 { struct s5p_gpio_bank y4; struct s5p_gpio_bank y5; struct s5p_gpio_bank y6; - struct s5p_gpio_bank res1[0x980]; + struct s5p_gpio_bank res1[0x3]; + struct s5p_gpio_bank c4; + struct s5p_gpio_bank res2[0x48]; struct s5p_gpio_bank x0; struct s5p_gpio_bank x1; struct s5p_gpio_bank x2; @@ -122,9 +124,10 @@ struct exynos5_gpio_part2 { struct exynos5_gpio_part3 { struct s5p_gpio_bank v0; struct s5p_gpio_bank v1; + struct s5p_gpio_bank res1[0x1]; struct s5p_gpio_bank v2; struct s5p_gpio_bank v3; - struct s5p_gpio_bank res1[0x20]; + struct s5p_gpio_bank res2[0x1]; struct s5p_gpio_bank v4; }; diff --git a/arch/arm/include/asm/arch-exynos/power.h b/arch/arm/include/asm/arch-exynos/power.h index e5467e242d..d2fdb59817 100644 --- a/arch/arm/include/asm/arch-exynos/power.h +++ b/arch/arm/include/asm/arch-exynos/power.h @@ -859,4 +859,9 @@ void set_usbhost_phy_ctrl(unsigned int enable); #define POWER_USB_HOST_PHY_CTRL_EN (1 << 0) #define POWER_USB_HOST_PHY_CTRL_DISABLE (0 << 0) + +void set_dp_phy_ctrl(unsigned int enable); + +#define EXYNOS_DP_PHY_ENABLE (1 << 0) + #endif diff --git a/arch/arm/include/asm/arch-exynos/pwm_backlight.h b/arch/arm/include/asm/arch-exynos/pwm_backlight.h new file mode 100644 index 0000000000..368ffc5cd7 --- /dev/null +++ b/arch/arm/include/asm/arch-exynos/pwm_backlight.h @@ -0,0 +1,34 @@ +/* + * Copyright (C) 2012 Samsung Electronics + * + * Author: Donghwa Lee <dh09.lee@samsung.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _PWM_BACKLIGHT_H_ +#define _PWM_BACKLIGHT_H_ + +struct pwm_backlight_data { + int pwm_id; + int period; + int max_brightness; + int brightness; +}; + +extern int exynos_pwm_backlight_init(struct pwm_backlight_data *pd); + +#endif /* _PWM_BACKLIGHT_H_ */ diff --git a/arch/arm/include/asm/arch-exynos/spl.h b/arch/arm/include/asm/arch-exynos/spl.h new file mode 100644 index 0000000000..306b41d825 --- /dev/null +++ b/arch/arm/include/asm/arch-exynos/spl.h @@ -0,0 +1,97 @@ +/* + * Copyright (c) 2012 The Chromium OS Authors. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __ASM_ARCH_EXYNOS_SPL_H__ +#define __ASM_ARCH_EXYNOS_SPL_H__ + +#include <asm/arch-exynos/dmc.h> + +enum boot_mode { + /* + * Assign the OM pin values for respective boot modes. + * Exynos4 does not support spi boot and the mmc boot OM + * pin values are the same across Exynos4 and Exynos5. + */ + BOOT_MODE_MMC = 4, + BOOT_MODE_SERIAL = 20, + /* Boot based on Operating Mode pin settings */ + BOOT_MODE_OM = 32, + BOOT_MODE_USB, /* Boot using USB download */ +}; + +#ifndef __ASSEMBLY__ +/* Parameters of early board initialization in SPL */ +struct spl_machine_param { + /* Add fields as and when required */ + u32 signature; + u32 version; /* Version number */ + u32 size; /* Size of block */ + /** + * Parameters we expect, in order, terminated with \0. Each parameter + * is a single character representing one 32-bit word in this + * structure. + * + * Valid characters in this string are: + * + * Code Name + * v mem_iv_size + * m mem_type + * u uboot_size + * b boot_source + * f frequency_mhz (memory frequency in MHz) + * a ARM clock frequency in MHz + * s serial base address + * i i2c base address for early access (meant for PMIC) + * r board rev GPIO numbers used to read board revision + * (lower halfword=bit 0, upper=bit 1) + * M Memory Manufacturer name + * \0 termination + */ + char params[12]; /* Length must be word-aligned */ + u32 mem_iv_size; /* Memory channel interleaving size */ + enum ddr_mode mem_type; /* Type of on-board memory */ + /* + * U-boot size - The iROM mmc copy function used by the SPL takes a + * block count paramter to describe the u-boot size unlike the spi + * boot copy function which just uses the u-boot size directly. Align + * the u-boot size to block size (512 bytes) when populating the SPL + * table only for mmc boot. + */ + u32 uboot_size; + enum boot_mode boot_source; /* Boot device */ + enum mem_manuf mem_manuf; /* Memory Manufacturer */ + unsigned frequency_mhz; /* Frequency of memory in MHz */ + unsigned arm_freq_mhz; /* ARM Frequency in MHz */ + u32 serial_base; /* Serial base address */ + u32 i2c_base; /* i2c base address */ +} __attribute__((__packed__)); +#endif + +/** + * Validate signature and return a pointer to the parameter table. If the + * signature is invalid, call panic() and never return. + * + * @return pointer to the parameter table if signature matched or never return. + */ +struct spl_machine_param *spl_get_machine_params(void); + +#endif /* __ASM_ARCH_EXYNOS_SPL_H__ */ diff --git a/arch/arm/include/asm/arch-imx/imx-regs.h b/arch/arm/include/asm/arch-imx/imx-regs.h index ec94ba913f..4de0779d28 100644 --- a/arch/arm/include/asm/arch-imx/imx-regs.h +++ b/arch/arm/include/asm/arch-imx/imx-regs.h @@ -1,5 +1,8 @@ #ifndef _IMX_REGS_H #define _IMX_REGS_H + +#define ARCH_MXC + /* ------------------------------------------------------------------------ * Motorola IMX system registers * ------------------------------------------------------------------------ diff --git a/arch/arm/include/asm/arch-mx25/gpio.h b/arch/arm/include/asm/arch-mx25/gpio.h index dc6edc7c85..61c0b0d723 100644 --- a/arch/arm/include/asm/arch-mx25/gpio.h +++ b/arch/arm/include/asm/arch-mx25/gpio.h @@ -25,21 +25,6 @@ #ifndef __ASM_ARCH_MX25_GPIO_H #define __ASM_ARCH_MX25_GPIO_H -/* Converts a GPIO port number and the internal bit position - * to the GPIO number - */ -#define MXC_GPIO_PORT_TO_NUM(port, bit) (((port - 1) << 5) + (bit & 0x1f)) - -/* GPIO registers */ -struct gpio_regs { - u32 gpio_dr; /* data */ - u32 gpio_dir; /* direction */ - u32 psr; /* pad satus */ - u32 icr1; /* interrupt config 1 */ - u32 icr2; /* interrupt config 2 */ - u32 imr; /* interrupt mask */ - u32 isr; /* interrupt status */ - u32 edge_sel; /* edge select */ -}; +#include <asm/imx-common/gpio.h> #endif diff --git a/arch/arm/include/asm/arch-mx25/imx-regs.h b/arch/arm/include/asm/arch-mx25/imx-regs.h index cf925d70d5..672f9d74b8 100644 --- a/arch/arm/include/asm/arch-mx25/imx-regs.h +++ b/arch/arm/include/asm/arch-mx25/imx-regs.h @@ -172,6 +172,8 @@ struct aips_regs { #endif +#define ARCH_MXC + /* AIPS 1 */ #define IMX_AIPS1_BASE (0x43F00000) #define IMX_MAX_BASE (0x43F04000) diff --git a/arch/arm/include/asm/arch-mx27/gpio.h b/arch/arm/include/asm/arch-mx27/gpio.h new file mode 100644 index 0000000000..4b4eb0d5c0 --- /dev/null +++ b/arch/arm/include/asm/arch-mx27/gpio.h @@ -0,0 +1,55 @@ +/* + * Copyright (C) 2012 + * Philippe Reynes <tremyfr@yahoo.fr> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + +#ifndef __ASM_ARCH_MX27_GPIO_H +#define __ASM_ARCH_MX27_GPIO_H + +/* GPIO registers */ +struct gpio_regs { + u32 gpio_dir; /* DDIR */ + u32 ocr1; + u32 ocr2; + u32 iconfa1; + u32 iconfa2; + u32 iconfb1; + u32 iconfb2; + u32 gpio_dr; /* DR */ + u32 gius; + u32 gpio_psr; /* SSR */ + u32 icr1; + u32 icr2; + u32 imr; + u32 isr; + u32 gpr; + u32 swr; + u32 puen; + u32 res[0x2f]; +}; + +/* This structure is used by the function imx_gpio_mode */ +struct gpio_port_regs { + struct gpio_regs port[6]; +}; + +#endif diff --git a/arch/arm/include/asm/arch-mx27/imx-regs.h b/arch/arm/include/asm/arch-mx27/imx-regs.h index ced5b2a38c..2f6c823722 100644 --- a/arch/arm/include/asm/arch-mx27/imx-regs.h +++ b/arch/arm/include/asm/arch-mx27/imx-regs.h @@ -24,6 +24,8 @@ #ifndef _IMX_REGS_H #define _IMX_REGS_H +#include <asm/arch/regs-rtc.h> + #ifndef __ASSEMBLY__ extern void imx_gpio_mode (int gpio_mode); @@ -162,29 +164,6 @@ struct gpt_regs { #define PORTE 4 #define PORTF 5 -struct gpio_regs { - struct { - u32 ddir; - u32 ocr1; - u32 ocr2; - u32 iconfa1; - u32 iconfa2; - u32 iconfb1; - u32 iconfb2; - u32 dr; - u32 gius; - u32 ssr; - u32 icr1; - u32 icr2; - u32 imr; - u32 isr; - u32 gpr; - u32 swr; - u32 puen; - u32 res[0x2f]; - } port[6]; -}; - /* IIM Control Registers */ struct iim_regs { u32 iim_stat; @@ -217,6 +196,8 @@ struct fuse_bank0_regs { #endif +#define ARCH_MXC + #define IMX_IO_BASE 0x10000000 #define IMX_AIPI1_BASE (0x00000 + IMX_IO_BASE) @@ -224,6 +205,7 @@ struct fuse_bank0_regs { #define IMX_TIM1_BASE (0x03000 + IMX_IO_BASE) #define IMX_TIM2_BASE (0x04000 + IMX_IO_BASE) #define IMX_TIM3_BASE (0x05000 + IMX_IO_BASE) +#define IMX_RTC_BASE (0x07000 + IMX_IO_BASE) #define UART1_BASE (0x0a000 + IMX_IO_BASE) #define UART2_BASE (0x0b000 + IMX_IO_BASE) #define UART3_BASE (0x0c000 + IMX_IO_BASE) @@ -471,6 +453,13 @@ struct fuse_bank0_regs { #define TSTAT_CAPT (1 << 1) /* Capture event */ #define TSTAT_COMP 1 /* Compare event */ +#define GPIO1_BASE_ADDR 0x10015000 +#define GPIO2_BASE_ADDR 0x10015100 +#define GPIO3_BASE_ADDR 0x10015200 +#define GPIO4_BASE_ADDR 0x10015300 +#define GPIO5_BASE_ADDR 0x10015400 +#define GPIO6_BASE_ADDR 0x10015500 + #define GPIO_PIN_MASK 0x1f #define GPIO_PORT_SHIFT 5 diff --git a/arch/arm/include/asm/arch-mx27/regs-rtc.h b/arch/arm/include/asm/arch-mx27/regs-rtc.h new file mode 100644 index 0000000000..4f92d0f8f5 --- /dev/null +++ b/arch/arm/include/asm/arch-mx27/regs-rtc.h @@ -0,0 +1,40 @@ +/* + * Freescale i.MX27 RTC Register Definitions + * + * Copyright (C) 2012 Philippe Reynes <tremyfr@yahoo.fr> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#ifndef __MX27_REGS_RTC_H__ +#define __MX27_REGS_RTC_H__ + +#ifndef __ASSEMBLY__ +struct rtc_regs { + u32 hourmin; + u32 seconds; + u32 alrm_hm; + u32 alrm_sec; + u32 rtcctl; + u32 rtcisr; + u32 rtcienr; + u32 stpwch; + u32 dayr; + u32 dayalarm; +}; +#endif /* __ASSEMBLY__*/ + +#endif /* __MX28_REGS_RTC_H__ */ diff --git a/arch/arm/include/asm/arch-mx31/gpio.h b/arch/arm/include/asm/arch-mx31/gpio.h index 95b73bfc34..55c0afa809 100644 --- a/arch/arm/include/asm/arch-mx31/gpio.h +++ b/arch/arm/include/asm/arch-mx31/gpio.h @@ -25,11 +25,6 @@ #ifndef __ASM_ARCH_MX31_GPIO_H #define __ASM_ARCH_MX31_GPIO_H -/* GPIO Registers */ -struct gpio_regs { - u32 gpio_dr; - u32 gpio_dir; - u32 gpio_psr; -}; +#include <asm/imx-common/gpio.h> #endif diff --git a/arch/arm/include/asm/arch-mx31/imx-regs.h b/arch/arm/include/asm/arch-mx31/imx-regs.h index 7ddbbd627c..1dd952c55f 100644 --- a/arch/arm/include/asm/arch-mx31/imx-regs.h +++ b/arch/arm/include/asm/arch-mx31/imx-regs.h @@ -541,6 +541,8 @@ struct esdc_regs { #endif +#define ARCH_MXC + #define __REG(x) (*((volatile u32 *)(x))) #define __REG16(x) (*((volatile u16 *)(x))) #define __REG8(x) (*((volatile u8 *)(x))) @@ -669,7 +671,7 @@ struct esdc_regs { #define IPU_CONF_PF_EN (1<<3) #define IPU_CONF_ROT_EN (1<<2) #define IPU_CONF_IC_EN (1<<1) -#define IPU_CONF_SCI_EN (1<<0) +#define IPU_CONF_CSI_EN (1<<0) #define ARM_PPMRR 0x40000015 diff --git a/arch/arm/include/asm/arch-mx35/clock.h b/arch/arm/include/asm/arch-mx35/clock.h index 4c0ddfd440..e94f124479 100644 --- a/arch/arm/include/asm/arch-mx35/clock.h +++ b/arch/arm/include/asm/arch-mx35/clock.h @@ -25,7 +25,7 @@ #define __ASM_ARCH_CLOCK_H enum mxc_clock { - MXC_ARM_CLK = 0, + MXC_ARM_CLK, MXC_AHB_CLK, MXC_IPG_CLK, MXC_IPG_PERCLK, @@ -36,7 +36,31 @@ enum mxc_clock { MXC_FEC_CLK, }; -unsigned int imx_decode_pll(unsigned int pll, unsigned int f_ref); +enum mxc_main_clock { + CPU_CLK, + AHB_CLK, + IPG_CLK, + IPG_PER_CLK, + NFC_CLK, + USB_CLK, + HSP_CLK, +}; + +enum mxc_peri_clock { + UART1_BAUD, + UART2_BAUD, + UART3_BAUD, + SSI1_BAUD, + SSI2_BAUD, + CSI_BAUD, + MSHC_CLK, + ESDHC1_CLK, + ESDHC2_CLK, + ESDHC3_CLK, + SPDIF_CLK, + SPI1_CLK, + SPI2_CLK, +}; u32 imx_get_uartclk(void); u32 imx_get_fecclk(void); diff --git a/arch/arm/include/asm/arch-mx35/crm_regs.h b/arch/arm/include/asm/arch-mx35/crm_regs.h index e903cf1c4c..7a2d1bbbf1 100644 --- a/arch/arm/include/asm/arch-mx35/crm_regs.h +++ b/arch/arm/include/asm/arch-mx35/crm_regs.h @@ -158,8 +158,8 @@ #define MXC_CCM_CGR0_CSPI2_MASK (0x3 << 12) #define MXC_CCM_CGR0_ECT_OFFSET 14 #define MXC_CCM_CGR0_ECT_MASK (0x3 << 14) -#define MXC_CCM_CGR0_EDI0_OFFSET 16 -#define MXC_CCM_CGR0_EDI0_MASK (0x3 << 16) +#define MXC_CCM_CGR0_EDIO_OFFSET 16 +#define MXC_CCM_CGR0_EDIO_MASK (0x3 << 16) #define MXC_CCM_CGR0_EMI_OFFSET 18 #define MXC_CCM_CGR0_EMI_MASK (0x3 << 18) #define MXC_CCM_CGR0_EPIT1_OFFSET 20 diff --git a/arch/arm/include/asm/arch-mx35/gpio.h b/arch/arm/include/asm/arch-mx35/gpio.h index 7bcc3e8688..1deb2927a0 100644 --- a/arch/arm/include/asm/arch-mx35/gpio.h +++ b/arch/arm/include/asm/arch-mx35/gpio.h @@ -25,16 +25,6 @@ #ifndef __ASM_ARCH_MX35_GPIO_H #define __ASM_ARCH_MX35_GPIO_H -/* GPIO registers */ -struct gpio_regs { - u32 gpio_dr; /* data */ - u32 gpio_dir; /* direction */ - u32 psr; /* pad satus */ - u32 icr1; /* interrupt config 1 */ - u32 icr2; /* interrupt config 2 */ - u32 imr; /* interrupt mask */ - u32 isr; /* interrupt status */ - u32 edge_sel; /* edge select */ -}; +#include <asm/imx-common/gpio.h> #endif diff --git a/arch/arm/include/asm/arch-mx35/imx-regs.h b/arch/arm/include/asm/arch-mx35/imx-regs.h index 314600621c..2c6e59c324 100644 --- a/arch/arm/include/asm/arch-mx35/imx-regs.h +++ b/arch/arm/include/asm/arch-mx35/imx-regs.h @@ -25,6 +25,8 @@ #ifndef __ASM_ARCH_MX35_H #define __ASM_ARCH_MX35_H +#define ARCH_MXC + /* * IRAM */ @@ -72,7 +74,6 @@ #define MMC_SDHC2_BASE_ADDR 0x53FB8000 #define MMC_SDHC3_BASE_ADDR 0x53FBC000 #define IPU_CTRL_BASE_ADDR 0x53FC0000 -#define GPIO3_BASE_ADDR 0x53FA4000 #define GPIO1_BASE_ADDR 0x53FCC000 #define GPIO2_BASE_ADDR 0x53FD0000 #define SDMA_BASE_ADDR 0x53FD4000 @@ -177,7 +178,7 @@ #define IPU_CONF_PF_EN (1<<3) #define IPU_CONF_ROT_EN (1<<2) #define IPU_CONF_IC_EN (1<<1) -#define IPU_CONF_SCI_EN (1<<0) +#define IPU_CONF_CSI_EN (1<<0) /* * CSPI register definitions @@ -216,32 +217,6 @@ #if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__)) #include <asm/types.h> -enum mxc_main_clocks { - CPU_CLK, - AHB_CLK, - IPG_CLK, - IPG_PER_CLK, - NFC_CLK, - USB_CLK, - HSP_CLK, -}; - -enum mxc_peri_clocks { - UART1_BAUD, - UART2_BAUD, - UART3_BAUD, - SSI1_BAUD, - SSI2_BAUD, - CSI_BAUD, - MSHC_CLK, - ESDHC1_CLK, - ESDHC2_CLK, - ESDHC3_CLK, - SPDIF_CLK, - SPI1_CLK, - SPI2_CLK, -}; - /* Clock Control Module (CCM) registers */ struct ccm_regs { u32 ccmr; /* Control */ diff --git a/arch/arm/include/asm/arch-mx35/mx35_pins.h b/arch/arm/include/asm/arch-mx35/mx35_pins.h index 8c38139118..00e5e75835 100644 --- a/arch/arm/include/asm/arch-mx35/mx35_pins.h +++ b/arch/arm/include/asm/arch-mx35/mx35_pins.h @@ -347,9 +347,6 @@ typedef enum iomux_pins { MX35_PIN_FEC_TDATA2 = _MXC_BUILD_GPIO_PIN(2, 21, 0x31C, 0x780), MX35_PIN_FEC_RDATA3 = _MXC_BUILD_GPIO_PIN(2, 22, 0x320, 0x784), MX35_PIN_FEC_TDATA3 = _MXC_BUILD_GPIO_PIN(2, 23, 0x324, 0x788), - - MX35_PIN_RTS2_UART3_RXD_MUX = _MXC_BUILD_NON_GPIO_PIN(0x1a0, 0x5e4), - MX35_PIN_CTS2_UART3_TXD_MUX = _MXC_BUILD_NON_GPIO_PIN(0x1a4, 0x5e8), } iomux_pin_name_t; #endif diff --git a/arch/arm/include/asm/arch-mx35/sys_proto.h b/arch/arm/include/asm/arch-mx35/sys_proto.h index 422eb520aa..9c0d51321d 100644 --- a/arch/arm/include/asm/arch-mx35/sys_proto.h +++ b/arch/arm/include/asm/arch-mx35/sys_proto.h @@ -26,6 +26,5 @@ u32 get_cpu_rev(void); #define is_soc_rev(rev) ((get_cpu_rev() & 0xFF) - rev) -void sdelay(unsigned long); #endif diff --git a/arch/arm/include/asm/arch-mx5/clock.h b/arch/arm/include/asm/arch-mx5/clock.h index 36ea03082f..8d8fa18fc5 100644 --- a/arch/arm/include/asm/arch-mx5/clock.h +++ b/arch/arm/include/asm/arch-mx5/clock.h @@ -38,8 +38,6 @@ enum mxc_clock { MXC_PERIPH_CLK, }; -unsigned int imx_decode_pll(unsigned int pll, unsigned int f_ref); - u32 imx_get_uartclk(void); u32 imx_get_fecclk(void); unsigned int mxc_get_clock(enum mxc_clock clk); diff --git a/arch/arm/include/asm/arch-mx5/gpio.h b/arch/arm/include/asm/arch-mx5/gpio.h index 1dc34e9164..b1b1218083 100644 --- a/arch/arm/include/asm/arch-mx5/gpio.h +++ b/arch/arm/include/asm/arch-mx5/gpio.h @@ -25,11 +25,6 @@ #ifndef __ASM_ARCH_MX5_GPIO_H #define __ASM_ARCH_MX5_GPIO_H -/* GPIO registers */ -struct gpio_regs { - u32 gpio_dr; - u32 gpio_dir; - u32 gpio_psr; -}; +#include <asm/imx-common/gpio.h> #endif diff --git a/arch/arm/include/asm/arch-mx5/imx-regs.h b/arch/arm/include/asm/arch-mx5/imx-regs.h index 7f66b61b3c..d1ef15d043 100644 --- a/arch/arm/include/asm/arch-mx5/imx-regs.h +++ b/arch/arm/include/asm/arch-mx5/imx-regs.h @@ -23,6 +23,8 @@ #ifndef __ASM_ARCH_MX5_IMX_REGS_H__ #define __ASM_ARCH_MX5_IMX_REGS_H__ +#define ARCH_MXC + #if defined(CONFIG_MX51) #define IRAM_BASE_ADDR 0x1FFE0000 /* internal ram */ #define IPU_SOC_BASE_ADDR 0x40000000 @@ -459,6 +461,24 @@ struct src { u32 simr; }; +struct srtc_regs { + u32 lpscmr; /* 0x00 */ + u32 lpsclr; /* 0x04 */ + u32 lpsar; /* 0x08 */ + u32 lpsmcr; /* 0x0c */ + u32 lpcr; /* 0x10 */ + u32 lpsr; /* 0x14 */ + u32 lppdr; /* 0x18 */ + u32 lpgr; /* 0x1c */ + u32 hpcmr; /* 0x20 */ + u32 hpclr; /* 0x24 */ + u32 hpamr; /* 0x28 */ + u32 hpalr; /* 0x2c */ + u32 hpcr; /* 0x30 */ + u32 hpisr; /* 0x34 */ + u32 hpienr; /* 0x38 */ +}; + /* CSPI registers */ struct cspi_regs { u32 rxdata; diff --git a/arch/arm/include/asm/arch-mx5/iomux-mx51.h b/arch/arm/include/asm/arch-mx5/iomux-mx51.h new file mode 100644 index 0000000000..4f37295994 --- /dev/null +++ b/arch/arm/include/asm/arch-mx5/iomux-mx51.h @@ -0,0 +1,164 @@ +/* + * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com> + * Copyright (C) 2010 Freescale Semiconductor, Inc. + * Copyright (C) 2009-2012 Genesi USA, Inc. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/* + * The vast majority of this file is taken from the Linux kernel at + * commit 5d23b39 + */ + +#ifndef __IOMUX_MX51_H__ +#define __IOMUX_MX51_H__ + +#include <asm/imx-common/iomux-v3.h> + +#define PAD_CTL_DVS (1 << 13) +#define PAD_CTL_INPUT_DDR (1 << 9) +#define PAD_CTL_HYS (1 << 8) + +#define PAD_CTL_PKE (1 << 7) +#define PAD_CTL_PUE (1 << 6 | PAD_CTL_PKE) +#define PAD_CTL_PUS_100K_DOWN (0 << 4 | PAD_CTL_PUE) +#define PAD_CTL_PUS_47K_UP (1 << 4 | PAD_CTL_PUE) +#define PAD_CTL_PUS_100K_UP (2 << 4 | PAD_CTL_PUE) +#define PAD_CTL_PUS_22K_UP (3 << 4 | PAD_CTL_PUE) + +#define PAD_CTL_ODE (1 << 3) + +#define PAD_CTL_DSE_LOW (0 << 1) +#define PAD_CTL_DSE_MED (1 << 1) +#define PAD_CTL_DSE_HIGH (2 << 1) +#define PAD_CTL_DSE_MAX (3 << 1) + +#define PAD_CTL_SRE_FAST (1 << 0) +#define PAD_CTL_SRE_SLOW (0 << 0) + +/* Pad control groupings */ +#define MX51_UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_DSE_HIGH | \ + PAD_CTL_HYS | PAD_CTL_SRE_FAST) +#define MX51_I2C_PAD_CTRL (PAD_CTL_SRE_FAST | PAD_CTL_ODE | \ + PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP | \ + PAD_CTL_HYS) +#define MX51_ESDHC_PAD_CTRL (PAD_CTL_SRE_FAST | PAD_CTL_ODE | \ + PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP | \ + PAD_CTL_HYS) +#define MX51_USBH1_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_SRE_FAST | \ + PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP | \ + PAD_CTL_HYS | PAD_CTL_PUE) +#define MX51_ECSPI_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_HYS | \ + PAD_CTL_DSE_HIGH | PAD_CTL_SRE_FAST) +#define MX51_SDHCI_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_DSE_HIGH | \ + PAD_CTL_PUS_47K_UP | PAD_CTL_PUE | \ + PAD_CTL_SRE_FAST | PAD_CTL_DVS) +#define MX51_GPIO_PAD_CTRL (PAD_CTL_DSE_HIGH | PAD_CTL_PKE | PAD_CTL_SRE_FAST) + +#define __NA_ 0x000 + +/* + * The naming convention for the pad modes is MX51_PAD_<padname>__<padmode> + * If <padname> or <padmode> refers to a GPIO, it is named GPIO<unit>_<num> + * See also iomux-v3.h + */ + +/* PAD MUX ALT INPSE PATH PADCTRL */ +enum { + MX51_PAD_EIM_D16__USBH2_DATA0 = IOMUX_PAD(0x3f0, 0x05c, 2, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_EIM_D17__USBH2_DATA1 = IOMUX_PAD(0x3f4, 0x060, 2, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_EIM_D18__USBH2_DATA2 = IOMUX_PAD(0x3f8, 0x064, 2, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_EIM_D19__USBH2_DATA3 = IOMUX_PAD(0x3fc, 0x068, 2, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_EIM_D20__USBH2_DATA4 = IOMUX_PAD(0x400, 0x06c, 2, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_EIM_D21__USBH2_DATA5 = IOMUX_PAD(0x404, 0x070, 2, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_EIM_D22__USBH2_DATA6 = IOMUX_PAD(0x408, 0x074, 2, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_EIM_D23__USBH2_DATA7 = IOMUX_PAD(0x40c, 0x078, 2, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_EIM_D27__GPIO2_9 = IOMUX_PAD(0x41c, 0x088, 1, __NA_, 0, MX51_GPIO_PAD_CTRL), + MX51_PAD_EIM_A24__USBH2_CLK = IOMUX_PAD(0x450, 0x0bc, 2, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_EIM_A25__USBH2_DIR = IOMUX_PAD(0x454, 0x0c0, 2, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_EIM_A26__GPIO2_20 = IOMUX_PAD(0x458, 0x0c4, 1, __NA_, 0, MX51_GPIO_PAD_CTRL), + MX51_PAD_EIM_A26__USBH2_STP = IOMUX_PAD(0x458, 0x0c4, 2, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_EIM_A27__USBH2_NXT = IOMUX_PAD(0x45c, 0x0c8, 2, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_EIM_CS0__GPIO2_25 = IOMUX_PAD(0x474, 0x0e0, 1, __NA_, 0, MX51_GPIO_PAD_CTRL), + MX51_PAD_EIM_CS2__SD1_CD = IOMUX_PAD(0x47c, 0x0e8, 1, __NA_, 0, MX51_ESDHC_PAD_CTRL), + MX51_PAD_EIM_CS3__GPIO2_28 = IOMUX_PAD(0x480, 0x0ec, 1, __NA_, 0, MX51_GPIO_PAD_CTRL), + MX51_PAD_EIM_CS4__GPIO2_29 = IOMUX_PAD(0x484, 0x0f0, 1, __NA_, 0, MX51_GPIO_PAD_CTRL), + MX51_PAD_NANDF_WE_B__PATA_DIOW = IOMUX_PAD(0x4e4, 0x108, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_RE_B__PATA_DIOR = IOMUX_PAD(0x4e8, 0x10c, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_ALE__PATA_BUFFER_EN = IOMUX_PAD(0x4ec, 0x110, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_CLE__PATA_RESET_B = IOMUX_PAD(0x4f0, 0x114, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_WP_B__PATA_DMACK = IOMUX_PAD(0x4f4, 0x118, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_RB0__PATA_DMARQ = IOMUX_PAD(0x4f8, 0x11c, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_RB1__PATA_IORDY = IOMUX_PAD(0x4fc, 0x120, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_GPIO_NAND__PATA_INTRQ = IOMUX_PAD(0x514, 0x12c, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_CS2__PATA_CS_0 = IOMUX_PAD(0x520, 0x138, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_CS3__PATA_CS_1 = IOMUX_PAD(0x524, 0x13c, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_CS4__PATA_DA_0 = IOMUX_PAD(0x528, 0x140, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_CS5__PATA_DA_1 = IOMUX_PAD(0x52c, 0x144, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_CS6__PATA_DA_2 = IOMUX_PAD(0x530, 0x148, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_D15__PATA_DATA15 = IOMUX_PAD(0x53c, 0x154, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_D14__PATA_DATA14 = IOMUX_PAD(0x540, 0x158, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_D13__PATA_DATA13 = IOMUX_PAD(0x544, 0x15c, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_D12__PATA_DATA12 = IOMUX_PAD(0x548, 0x160, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_D11__PATA_DATA11 = IOMUX_PAD(0x54c, 0x164, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_D10__PATA_DATA10 = IOMUX_PAD(0x550, 0x168, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_D9__PATA_DATA9 = IOMUX_PAD(0x554, 0x16c, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_D8__PATA_DATA8 = IOMUX_PAD(0x558, 0x170, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_D7__PATA_DATA7 = IOMUX_PAD(0x55c, 0x174, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_D6__PATA_DATA6 = IOMUX_PAD(0x560, 0x178, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_D5__PATA_DATA5 = IOMUX_PAD(0x564, 0x17c, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_D4__PATA_DATA4 = IOMUX_PAD(0x568, 0x180, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_D3__PATA_DATA3 = IOMUX_PAD(0x56c, 0x184, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_D2__PATA_DATA2 = IOMUX_PAD(0x570, 0x188, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_D1__PATA_DATA1 = IOMUX_PAD(0x574, 0x18c, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_D0__PATA_DATA0 = IOMUX_PAD(0x578, 0x190, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI = IOMUX_PAD(0x600, 0x210, 0, __NA_, 0, MX51_ECSPI_PAD_CTRL), + MX51_PAD_CSPI1_MISO__ECSPI1_MISO = IOMUX_PAD(0x604, 0x214, 0, __NA_, 0, MX51_ECSPI_PAD_CTRL), + MX51_PAD_CSPI1_SS0__GPIO4_24 = IOMUX_PAD(0x608, 0x218, 3, __NA_, 0, MX51_GPIO_PAD_CTRL), + MX51_PAD_CSPI1_SS1__GPIO4_25 = IOMUX_PAD(0x60c, 0x21c, 3, __NA_, 0, MX51_GPIO_PAD_CTRL), + MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK = IOMUX_PAD(0x614, 0x224, 0, __NA_, 0, MX51_ECSPI_PAD_CTRL), + MX51_PAD_UART1_RXD__UART1_RXD = IOMUX_PAD(0x618, 0x228, 0, 0x9e4, 0, MX51_UART_PAD_CTRL), + MX51_PAD_UART1_TXD__UART1_TXD = IOMUX_PAD(0x61c, 0x22c, 0, __NA_, 0, MX51_UART_PAD_CTRL), + MX51_PAD_UART1_RTS__UART1_RTS = IOMUX_PAD(0x620, 0x230, 0, 0x9e0, 0, MX51_UART_PAD_CTRL), + MX51_PAD_UART1_CTS__UART1_CTS = IOMUX_PAD(0x624, 0x234, 0, __NA_, 0, MX51_UART_PAD_CTRL), + MX51_PAD_USBH1_CLK__USBH1_CLK = IOMUX_PAD(0x678, 0x278, 0, __NA_, 0, MX51_USBH1_PAD_CTRL), + MX51_PAD_USBH1_DIR__USBH1_DIR = IOMUX_PAD(0x67c, 0x27c, 0, __NA_, 0, MX51_USBH1_PAD_CTRL), + MX51_PAD_USBH1_STP__USBH1_STP = IOMUX_PAD(0x680, 0x280, 0, __NA_, 0, MX51_USBH1_PAD_CTRL), + MX51_PAD_USBH1_STP__GPIO1_27 = IOMUX_PAD(0x680, 0x280, 2, __NA_, 0, MX51_GPIO_PAD_CTRL), + MX51_PAD_USBH1_NXT__USBH1_NXT = IOMUX_PAD(0x684, 0x284, 0, __NA_, 0, MX51_USBH1_PAD_CTRL), + MX51_PAD_USBH1_DATA0__USBH1_DATA0 = IOMUX_PAD(0x688, 0x288, 0, __NA_, 0, MX51_USBH1_PAD_CTRL), + MX51_PAD_USBH1_DATA1__USBH1_DATA1 = IOMUX_PAD(0x68c, 0x28c, 0, __NA_, 0, MX51_USBH1_PAD_CTRL), + MX51_PAD_USBH1_DATA2__USBH1_DATA2 = IOMUX_PAD(0x690, 0x290, 0, __NA_, 0, MX51_USBH1_PAD_CTRL), + MX51_PAD_USBH1_DATA3__USBH1_DATA3 = IOMUX_PAD(0x694, 0x294, 0, __NA_, 0, MX51_USBH1_PAD_CTRL), + MX51_PAD_USBH1_DATA4__USBH1_DATA4 = IOMUX_PAD(0x698, 0x298, 0, __NA_, 0, MX51_USBH1_PAD_CTRL), + MX51_PAD_USBH1_DATA5__USBH1_DATA5 = IOMUX_PAD(0x69c, 0x29c, 0, __NA_, 0, MX51_USBH1_PAD_CTRL), + MX51_PAD_USBH1_DATA6__USBH1_DATA6 = IOMUX_PAD(0x6a0, 0x2a0, 0, __NA_, 0, MX51_USBH1_PAD_CTRL), + MX51_PAD_USBH1_DATA7__USBH1_DATA7 = IOMUX_PAD(0x6a4, 0x2a4, 0, __NA_, 0, MX51_USBH1_PAD_CTRL), + MX51_PAD_SD1_CMD__SD1_CMD = IOMUX_PAD(0x79c, 0x394, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL), + MX51_PAD_SD1_CLK__SD1_CLK = IOMUX_PAD(0x7a0, 0x398, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL | PAD_CTL_HYS), + MX51_PAD_SD1_DATA0__SD1_DATA0 = IOMUX_PAD(0x7a4, 0x39c, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL), + MX51_PAD_SD1_DATA1__SD1_DATA1 = IOMUX_PAD(0x7a8, 0x3a0, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL), + MX51_PAD_SD1_DATA2__SD1_DATA2 = IOMUX_PAD(0x7ac, 0x3a4, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL), + MX51_PAD_SD1_DATA3__SD1_DATA3 = IOMUX_PAD(0x7b0, 0x3a8, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL), + MX51_PAD_GPIO1_0__SD1_CD = IOMUX_PAD(0x7b4, 0x3ac, 0, __NA_, 0, MX51_ESDHC_PAD_CTRL), + MX51_PAD_GPIO1_1__SD1_WP = IOMUX_PAD(0x7b8, 0x3b0, 0, __NA_, 0, MX51_ESDHC_PAD_CTRL), + MX51_PAD_SD2_CMD__SD2_CMD = IOMUX_PAD(0x7bc, 0x3b4, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL), + MX51_PAD_SD2_CLK__SD2_CLK = IOMUX_PAD(0x7c0, 0x3b8, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL | PAD_CTL_HYS), + MX51_PAD_SD2_DATA0__SD2_DATA0 = IOMUX_PAD(0x7c4, 0x3bc, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL), + MX51_PAD_SD2_DATA1__SD2_DATA1 = IOMUX_PAD(0x7c8, 0x3c0, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL), + MX51_PAD_SD2_DATA2__SD2_DATA2 = IOMUX_PAD(0x7cc, 0x3c4, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL), + MX51_PAD_SD2_DATA3__SD2_DATA3 = IOMUX_PAD(0x7d0, 0x3c8, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL), + MX51_PAD_GPIO1_3__GPIO1_3 = IOMUX_PAD(0x7d8, 0x3d0, 0, __NA_, 0, MX51_GPIO_PAD_CTRL), + MX51_PAD_GPIO1_5__GPIO1_5 = IOMUX_PAD(0x808, 0x3dc, 0, __NA_, 0, MX51_GPIO_PAD_CTRL), + MX51_PAD_GPIO1_6__GPIO1_6 = IOMUX_PAD(0x80c, 0x3e0, 0, __NA_, 0, MX51_GPIO_PAD_CTRL), + MX51_PAD_GPIO1_7__SD2_WP = IOMUX_PAD(0x810, 0x3e4, 6, __NA_, 0, MX51_ESDHC_PAD_CTRL), + MX51_PAD_GPIO1_8__SD2_CD = IOMUX_PAD(0x814, 0x3e8, 6, __NA_, 0, MX51_ESDHC_PAD_CTRL), +}; + +#endif /* __IOMUX_MX51_H__ */ diff --git a/arch/arm/include/asm/arch-mx6/gpio.h b/arch/arm/include/asm/arch-mx6/gpio.h index 20c4e57484..24c10f8bce 100644 --- a/arch/arm/include/asm/arch-mx6/gpio.h +++ b/arch/arm/include/asm/arch-mx6/gpio.h @@ -25,11 +25,6 @@ #ifndef __ASM_ARCH_MX6_GPIO_H #define __ASM_ARCH_MX6_GPIO_H -/* GPIO registers */ -struct gpio_regs { - u32 gpio_dr; - u32 gpio_dir; - u32 gpio_psr; -}; +#include <asm/imx-common/gpio.h> #endif /* __ASM_ARCH_MX6_GPIO_H */ diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h b/arch/arm/include/asm/arch-mx6/imx-regs.h index 5d77603ebf..8834c59dcc 100644 --- a/arch/arm/include/asm/arch-mx6/imx-regs.h +++ b/arch/arm/include/asm/arch-mx6/imx-regs.h @@ -19,6 +19,8 @@ #ifndef __ASM_ARCH_MX6_IMX_REGS_H__ #define __ASM_ARCH_MX6_IMX_REGS_H__ +#define ARCH_MXC + #define CONFIG_SYS_CACHELINE_SIZE 32 #define ROMCP_ARB_BASE_ADDR 0x00000000 @@ -172,8 +174,6 @@ #define IMX_IIM_BASE OCOTP_BASE_ADDR #define FEC_QUIRK_ENET_MAC -#define GPIO_NUMBER(port, index) ((((port)-1)*32)+((index)&31)) - #if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__)) #include <asm/types.h> @@ -448,5 +448,26 @@ struct iomuxc_base_regs { u32 daisy[104]; /* 0x7b0..94c */ }; +struct src_regs { + u32 scr; /* 0x00 */ + u32 sbmr1; /* 0x04 */ + u32 srsr; /* 0x08 */ + u32 reserved1; /* 0x0c */ + u32 reserved2; /* 0x10 */ + u32 sisr; /* 0x14 */ + u32 simr; /* 0x18 */ + u32 sbmr2; /* 0x1c */ + u32 gpr1; /* 0x20 */ + u32 gpr2; /* 0x24 */ + u32 gpr3; /* 0x28 */ + u32 gpr4; /* 0x2c */ + u32 gpr5; /* 0x30 */ + u32 gpr6; /* 0x34 */ + u32 gpr7; /* 0x38 */ + u32 gpr8; /* 0x3c */ + u32 gpr9; /* 0x40 */ + u32 gpr10; /* 0x44 */ +}; + #endif /* __ASSEMBLER__*/ #endif /* __ASM_ARCH_MX6_IMX_REGS_H__ */ diff --git a/arch/arm/include/asm/arch-mx6/iomux.h b/arch/arm/include/asm/arch-mx6/iomux.h new file mode 100644 index 0000000000..a1255f9bd5 --- /dev/null +++ b/arch/arm/include/asm/arch-mx6/iomux.h @@ -0,0 +1,129 @@ +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __ASM_ARCH_IOMUX_H__ +#define __ASM_ARCH_IOMUX_H__ +/* + * IOMUXC_GPR13 bit fields + */ +#define IOMUXC_GPR13_SDMA_STOP_REQ (1<<30) +#define IOMUXC_GPR13_CAN2_STOP_REQ (1<<29) +#define IOMUXC_GPR13_CAN1_STOP_REQ (1<<28) +#define IOMUXC_GPR13_ENET_STOP_REQ (1<<27) +#define IOMUXC_GPR13_SATA_PHY_8_MASK (7<<24) +#define IOMUXC_GPR13_SATA_PHY_7_MASK (0x1f<<19) +#define IOMUXC_GPR13_SATA_PHY_6_SHIFT 16 +#define IOMUXC_GPR13_SATA_PHY_6_MASK (7<<IOMUXC_GPR13_SATA_PHY_6_SHIFT) +#define IOMUXC_GPR13_SATA_SPEED_MASK (1<<15) +#define IOMUXC_GPR13_SATA_PHY_5_MASK (1<<14) +#define IOMUXC_GPR13_SATA_PHY_4_MASK (7<<11) +#define IOMUXC_GPR13_SATA_PHY_3_MASK (0x1f<<7) +#define IOMUXC_GPR13_SATA_PHY_2_MASK (0x1f<<2) +#define IOMUXC_GPR13_SATA_PHY_1_MASK (3<<0) + +#define IOMUXC_GPR13_SATA_PHY_8_RXEQ_0P5DB (0b000<<24) +#define IOMUXC_GPR13_SATA_PHY_8_RXEQ_1P0DB (0b001<<24) +#define IOMUXC_GPR13_SATA_PHY_8_RXEQ_1P5DB (0b010<<24) +#define IOMUXC_GPR13_SATA_PHY_8_RXEQ_2P0DB (0b011<<24) +#define IOMUXC_GPR13_SATA_PHY_8_RXEQ_2P5DB (0b100<<24) +#define IOMUXC_GPR13_SATA_PHY_8_RXEQ_3P0DB (0b101<<24) +#define IOMUXC_GPR13_SATA_PHY_8_RXEQ_3P5DB (0b110<<24) +#define IOMUXC_GPR13_SATA_PHY_8_RXEQ_4P0DB (0b111<<24) + +#define IOMUXC_GPR13_SATA_PHY_7_SATA1I (0b10000<<19) +#define IOMUXC_GPR13_SATA_PHY_7_SATA1M (0b10000<<19) +#define IOMUXC_GPR13_SATA_PHY_7_SATA1X (0b11010<<19) +#define IOMUXC_GPR13_SATA_PHY_7_SATA2I (0b10010<<19) +#define IOMUXC_GPR13_SATA_PHY_7_SATA2M (0b10010<<19) +#define IOMUXC_GPR13_SATA_PHY_7_SATA2X (0b11010<<19) + +#define IOMUXC_GPR13_SATA_SPEED_1P5G (0<<15) +#define IOMUXC_GPR13_SATA_SPEED_3G (1<<15) + +#define IOMUXC_GPR13_SATA_SATA_PHY_5_SS_DISABLED (0<<14) +#define IOMUXC_GPR13_SATA_SATA_PHY_5_SS_ENABLED (1<<14) + +#define IOMUXC_GPR13_SATA_SATA_PHY_4_ATTEN_16_16 (0<<11) +#define IOMUXC_GPR13_SATA_SATA_PHY_4_ATTEN_14_16 (1<<11) +#define IOMUXC_GPR13_SATA_SATA_PHY_4_ATTEN_12_16 (2<<11) +#define IOMUXC_GPR13_SATA_SATA_PHY_4_ATTEN_10_16 (3<<11) +#define IOMUXC_GPR13_SATA_SATA_PHY_4_ATTEN_9_16 (4<<11) +#define IOMUXC_GPR13_SATA_SATA_PHY_4_ATTEN_8_16 (5<<11) + +#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_0P00_DB (0b0000<<7) +#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_0P37_DB (0b0001<<7) +#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_0P74_DB (0b0010<<7) +#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_1P11_DB (0b0011<<7) +#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_1P48_DB (0b0100<<7) +#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_1P85_DB (0b0101<<7) +#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_2P22_DB (0b0110<<7) +#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_2P59_DB (0b0111<<7) +#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_2P96_DB (0b1000<<7) +#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_3P33_DB (0b1001<<7) +#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_3P70_DB (0b1010<<7) +#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_4P07_DB (0b1011<<7) +#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_4P44_DB (0b1100<<7) +#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_4P81_DB (0b1101<<7) +#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_5P28_DB (0b1110<<7) +#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_5P75_DB (0b1111<<7) + +#define IOMUXC_GPR13_SATA_PHY_2_TX_0P937V (0b00000<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_0P947V (0b00001<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_0P957V (0b00010<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_0P966V (0b00011<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_0P976V (0b00100<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_0P986V (0b00101<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_0P996V (0b00110<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_1P005V (0b00111<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_1P015V (0b01000<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_1P025V (0b01001<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_1P035V (0b01010<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_1P045V (0b01011<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_1P054V (0b01100<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_1P064V (0b01101<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_1P074V (0b01110<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_1P084V (0b01111<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_1P094V (0b10000<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_1P104V (0b10001<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_1P113V (0b10010<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_1P123V (0b10011<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_1P133V (0b10100<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_1P143V (0b10101<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_1P152V (0b10110<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_1P162V (0b10111<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_1P172V (0b11000<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_1P182V (0b11001<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_1P191V (0b11010<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_1P201V (0b11011<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_1P211V (0b11100<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_1P221V (0b11101<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_1P230V (0b11110<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_1P240V (0b11111<<2) + +#define IOMUXC_GPR13_SATA_PHY_1_FAST 0 +#define IOMUXC_GPR13_SATA_PHY_1_MEDIUM 1 +#define IOMUXC_GPR13_SATA_PHY_1_SLOW 2 + +#define IOMUXC_GPR13_SATA_MASK (IOMUXC_GPR13_SATA_PHY_8_MASK \ + |IOMUXC_GPR13_SATA_PHY_7_MASK \ + |IOMUXC_GPR13_SATA_PHY_6_MASK \ + |IOMUXC_GPR13_SATA_SPEED_MASK \ + |IOMUXC_GPR13_SATA_PHY_5_MASK \ + |IOMUXC_GPR13_SATA_PHY_4_MASK \ + |IOMUXC_GPR13_SATA_PHY_3_MASK \ + |IOMUXC_GPR13_SATA_PHY_2_MASK \ + |IOMUXC_GPR13_SATA_PHY_1_MASK) +#endif /* __ASM_ARCH_IOMUX_H__ */ diff --git a/arch/arm/include/asm/arch-mx28/clock.h b/arch/arm/include/asm/arch-mxs/clock.h index 1700fe3915..1700fe3915 100644 --- a/arch/arm/include/asm/arch-mx28/clock.h +++ b/arch/arm/include/asm/arch-mxs/clock.h diff --git a/arch/arm/include/asm/arch-mx28/dma.h b/arch/arm/include/asm/arch-mxs/dma.h index 4a1820bdee..a0a0ea5010 100644 --- a/arch/arm/include/asm/arch-mx28/dma.h +++ b/arch/arm/include/asm/arch-mxs/dma.h @@ -27,6 +27,7 @@ #define __DMA_H__ #include <linux/list.h> +#include <linux/compiler.h> #ifndef CONFIG_ARCH_DMA_PIO_WORDS #define DMA_PIO_WORDS 15 @@ -109,7 +110,7 @@ struct mxs_dma_desc { dma_addr_t address; void *buffer; struct list_head node; -}; +} __aligned(MXS_DMA_ALIGNMENT); /** * MXS DMA channel diff --git a/arch/arm/include/asm/arch-mx28/gpio.h b/arch/arm/include/asm/arch-mxs/gpio.h index be1c944eb7..be1c944eb7 100644 --- a/arch/arm/include/asm/arch-mx28/gpio.h +++ b/arch/arm/include/asm/arch-mxs/gpio.h diff --git a/arch/arm/include/asm/arch-mx28/imx-regs.h b/arch/arm/include/asm/arch-mxs/imx-regs.h index 37d0a93768..5e1901e6c4 100644 --- a/arch/arm/include/asm/arch-mx28/imx-regs.h +++ b/arch/arm/include/asm/arch-mxs/imx-regs.h @@ -26,7 +26,7 @@ #include <asm/arch/regs-apbh.h> #include <asm/arch/regs-base.h> #include <asm/arch/regs-bch.h> -#include <asm/arch/regs-clkctrl.h> +#include <asm/arch/regs-clkctrl-mx28.h> #include <asm/arch/regs-digctl.h> #include <asm/arch/regs-gpmi.h> #include <asm/arch/regs-i2c.h> diff --git a/arch/arm/include/asm/arch-mx28/iomux-mx28.h b/arch/arm/include/asm/arch-mxs/iomux-mx28.h index b42820de74..b42820de74 100644 --- a/arch/arm/include/asm/arch-mx28/iomux-mx28.h +++ b/arch/arm/include/asm/arch-mxs/iomux-mx28.h diff --git a/arch/arm/include/asm/arch-mx28/iomux.h b/arch/arm/include/asm/arch-mxs/iomux.h index 7abdf58b8b..7abdf58b8b 100644 --- a/arch/arm/include/asm/arch-mx28/iomux.h +++ b/arch/arm/include/asm/arch-mxs/iomux.h diff --git a/arch/arm/include/asm/arch-mx28/regs-apbh.h b/arch/arm/include/asm/arch-mxs/regs-apbh.h index 91d7bc8400..e18e677e33 100644 --- a/arch/arm/include/asm/arch-mx28/regs-apbh.h +++ b/arch/arm/include/asm/arch-mxs/regs-apbh.h @@ -29,143 +29,143 @@ #include <asm/arch/regs-common.h> #ifndef __ASSEMBLY__ -struct mx28_apbh_regs { - mx28_reg_32(hw_apbh_ctrl0) - mx28_reg_32(hw_apbh_ctrl1) - mx28_reg_32(hw_apbh_ctrl2) - mx28_reg_32(hw_apbh_channel_ctrl) - mx28_reg_32(hw_apbh_devsel) - mx28_reg_32(hw_apbh_dma_burst_size) - mx28_reg_32(hw_apbh_debug) +struct mxs_apbh_regs { + mxs_reg_32(hw_apbh_ctrl0) + mxs_reg_32(hw_apbh_ctrl1) + mxs_reg_32(hw_apbh_ctrl2) + mxs_reg_32(hw_apbh_channel_ctrl) + mxs_reg_32(hw_apbh_devsel) + mxs_reg_32(hw_apbh_dma_burst_size) + mxs_reg_32(hw_apbh_debug) uint32_t reserved[36]; union { struct { - mx28_reg_32(hw_apbh_ch_curcmdar) - mx28_reg_32(hw_apbh_ch_nxtcmdar) - mx28_reg_32(hw_apbh_ch_cmd) - mx28_reg_32(hw_apbh_ch_bar) - mx28_reg_32(hw_apbh_ch_sema) - mx28_reg_32(hw_apbh_ch_debug1) - mx28_reg_32(hw_apbh_ch_debug2) + mxs_reg_32(hw_apbh_ch_curcmdar) + mxs_reg_32(hw_apbh_ch_nxtcmdar) + mxs_reg_32(hw_apbh_ch_cmd) + mxs_reg_32(hw_apbh_ch_bar) + mxs_reg_32(hw_apbh_ch_sema) + mxs_reg_32(hw_apbh_ch_debug1) + mxs_reg_32(hw_apbh_ch_debug2) } ch[16]; struct { - mx28_reg_32(hw_apbh_ch0_curcmdar) - mx28_reg_32(hw_apbh_ch0_nxtcmdar) - mx28_reg_32(hw_apbh_ch0_cmd) - mx28_reg_32(hw_apbh_ch0_bar) - mx28_reg_32(hw_apbh_ch0_sema) - mx28_reg_32(hw_apbh_ch0_debug1) - mx28_reg_32(hw_apbh_ch0_debug2) - mx28_reg_32(hw_apbh_ch1_curcmdar) - mx28_reg_32(hw_apbh_ch1_nxtcmdar) - mx28_reg_32(hw_apbh_ch1_cmd) - mx28_reg_32(hw_apbh_ch1_bar) - mx28_reg_32(hw_apbh_ch1_sema) - mx28_reg_32(hw_apbh_ch1_debug1) - mx28_reg_32(hw_apbh_ch1_debug2) - mx28_reg_32(hw_apbh_ch2_curcmdar) - mx28_reg_32(hw_apbh_ch2_nxtcmdar) - mx28_reg_32(hw_apbh_ch2_cmd) - mx28_reg_32(hw_apbh_ch2_bar) - mx28_reg_32(hw_apbh_ch2_sema) - mx28_reg_32(hw_apbh_ch2_debug1) - mx28_reg_32(hw_apbh_ch2_debug2) - mx28_reg_32(hw_apbh_ch3_curcmdar) - mx28_reg_32(hw_apbh_ch3_nxtcmdar) - mx28_reg_32(hw_apbh_ch3_cmd) - mx28_reg_32(hw_apbh_ch3_bar) - mx28_reg_32(hw_apbh_ch3_sema) - mx28_reg_32(hw_apbh_ch3_debug1) - mx28_reg_32(hw_apbh_ch3_debug2) - mx28_reg_32(hw_apbh_ch4_curcmdar) - mx28_reg_32(hw_apbh_ch4_nxtcmdar) - mx28_reg_32(hw_apbh_ch4_cmd) - mx28_reg_32(hw_apbh_ch4_bar) - mx28_reg_32(hw_apbh_ch4_sema) - mx28_reg_32(hw_apbh_ch4_debug1) - mx28_reg_32(hw_apbh_ch4_debug2) - mx28_reg_32(hw_apbh_ch5_curcmdar) - mx28_reg_32(hw_apbh_ch5_nxtcmdar) - mx28_reg_32(hw_apbh_ch5_cmd) - mx28_reg_32(hw_apbh_ch5_bar) - mx28_reg_32(hw_apbh_ch5_sema) - mx28_reg_32(hw_apbh_ch5_debug1) - mx28_reg_32(hw_apbh_ch5_debug2) - mx28_reg_32(hw_apbh_ch6_curcmdar) - mx28_reg_32(hw_apbh_ch6_nxtcmdar) - mx28_reg_32(hw_apbh_ch6_cmd) - mx28_reg_32(hw_apbh_ch6_bar) - mx28_reg_32(hw_apbh_ch6_sema) - mx28_reg_32(hw_apbh_ch6_debug1) - mx28_reg_32(hw_apbh_ch6_debug2) - mx28_reg_32(hw_apbh_ch7_curcmdar) - mx28_reg_32(hw_apbh_ch7_nxtcmdar) - mx28_reg_32(hw_apbh_ch7_cmd) - mx28_reg_32(hw_apbh_ch7_bar) - mx28_reg_32(hw_apbh_ch7_sema) - mx28_reg_32(hw_apbh_ch7_debug1) - mx28_reg_32(hw_apbh_ch7_debug2) - mx28_reg_32(hw_apbh_ch8_curcmdar) - mx28_reg_32(hw_apbh_ch8_nxtcmdar) - mx28_reg_32(hw_apbh_ch8_cmd) - mx28_reg_32(hw_apbh_ch8_bar) - mx28_reg_32(hw_apbh_ch8_sema) - mx28_reg_32(hw_apbh_ch8_debug1) - mx28_reg_32(hw_apbh_ch8_debug2) - mx28_reg_32(hw_apbh_ch9_curcmdar) - mx28_reg_32(hw_apbh_ch9_nxtcmdar) - mx28_reg_32(hw_apbh_ch9_cmd) - mx28_reg_32(hw_apbh_ch9_bar) - mx28_reg_32(hw_apbh_ch9_sema) - mx28_reg_32(hw_apbh_ch9_debug1) - mx28_reg_32(hw_apbh_ch9_debug2) - mx28_reg_32(hw_apbh_ch10_curcmdar) - mx28_reg_32(hw_apbh_ch10_nxtcmdar) - mx28_reg_32(hw_apbh_ch10_cmd) - mx28_reg_32(hw_apbh_ch10_bar) - mx28_reg_32(hw_apbh_ch10_sema) - mx28_reg_32(hw_apbh_ch10_debug1) - mx28_reg_32(hw_apbh_ch10_debug2) - mx28_reg_32(hw_apbh_ch11_curcmdar) - mx28_reg_32(hw_apbh_ch11_nxtcmdar) - mx28_reg_32(hw_apbh_ch11_cmd) - mx28_reg_32(hw_apbh_ch11_bar) - mx28_reg_32(hw_apbh_ch11_sema) - mx28_reg_32(hw_apbh_ch11_debug1) - mx28_reg_32(hw_apbh_ch11_debug2) - mx28_reg_32(hw_apbh_ch12_curcmdar) - mx28_reg_32(hw_apbh_ch12_nxtcmdar) - mx28_reg_32(hw_apbh_ch12_cmd) - mx28_reg_32(hw_apbh_ch12_bar) - mx28_reg_32(hw_apbh_ch12_sema) - mx28_reg_32(hw_apbh_ch12_debug1) - mx28_reg_32(hw_apbh_ch12_debug2) - mx28_reg_32(hw_apbh_ch13_curcmdar) - mx28_reg_32(hw_apbh_ch13_nxtcmdar) - mx28_reg_32(hw_apbh_ch13_cmd) - mx28_reg_32(hw_apbh_ch13_bar) - mx28_reg_32(hw_apbh_ch13_sema) - mx28_reg_32(hw_apbh_ch13_debug1) - mx28_reg_32(hw_apbh_ch13_debug2) - mx28_reg_32(hw_apbh_ch14_curcmdar) - mx28_reg_32(hw_apbh_ch14_nxtcmdar) - mx28_reg_32(hw_apbh_ch14_cmd) - mx28_reg_32(hw_apbh_ch14_bar) - mx28_reg_32(hw_apbh_ch14_sema) - mx28_reg_32(hw_apbh_ch14_debug1) - mx28_reg_32(hw_apbh_ch14_debug2) - mx28_reg_32(hw_apbh_ch15_curcmdar) - mx28_reg_32(hw_apbh_ch15_nxtcmdar) - mx28_reg_32(hw_apbh_ch15_cmd) - mx28_reg_32(hw_apbh_ch15_bar) - mx28_reg_32(hw_apbh_ch15_sema) - mx28_reg_32(hw_apbh_ch15_debug1) - mx28_reg_32(hw_apbh_ch15_debug2) + mxs_reg_32(hw_apbh_ch0_curcmdar) + mxs_reg_32(hw_apbh_ch0_nxtcmdar) + mxs_reg_32(hw_apbh_ch0_cmd) + mxs_reg_32(hw_apbh_ch0_bar) + mxs_reg_32(hw_apbh_ch0_sema) + mxs_reg_32(hw_apbh_ch0_debug1) + mxs_reg_32(hw_apbh_ch0_debug2) + mxs_reg_32(hw_apbh_ch1_curcmdar) + mxs_reg_32(hw_apbh_ch1_nxtcmdar) + mxs_reg_32(hw_apbh_ch1_cmd) + mxs_reg_32(hw_apbh_ch1_bar) + mxs_reg_32(hw_apbh_ch1_sema) + mxs_reg_32(hw_apbh_ch1_debug1) + mxs_reg_32(hw_apbh_ch1_debug2) + mxs_reg_32(hw_apbh_ch2_curcmdar) + mxs_reg_32(hw_apbh_ch2_nxtcmdar) + mxs_reg_32(hw_apbh_ch2_cmd) + mxs_reg_32(hw_apbh_ch2_bar) + mxs_reg_32(hw_apbh_ch2_sema) + mxs_reg_32(hw_apbh_ch2_debug1) + mxs_reg_32(hw_apbh_ch2_debug2) + mxs_reg_32(hw_apbh_ch3_curcmdar) + mxs_reg_32(hw_apbh_ch3_nxtcmdar) + mxs_reg_32(hw_apbh_ch3_cmd) + mxs_reg_32(hw_apbh_ch3_bar) + mxs_reg_32(hw_apbh_ch3_sema) + mxs_reg_32(hw_apbh_ch3_debug1) + mxs_reg_32(hw_apbh_ch3_debug2) + mxs_reg_32(hw_apbh_ch4_curcmdar) + mxs_reg_32(hw_apbh_ch4_nxtcmdar) + mxs_reg_32(hw_apbh_ch4_cmd) + mxs_reg_32(hw_apbh_ch4_bar) + mxs_reg_32(hw_apbh_ch4_sema) + mxs_reg_32(hw_apbh_ch4_debug1) + mxs_reg_32(hw_apbh_ch4_debug2) + mxs_reg_32(hw_apbh_ch5_curcmdar) + mxs_reg_32(hw_apbh_ch5_nxtcmdar) + mxs_reg_32(hw_apbh_ch5_cmd) + mxs_reg_32(hw_apbh_ch5_bar) + mxs_reg_32(hw_apbh_ch5_sema) + mxs_reg_32(hw_apbh_ch5_debug1) + mxs_reg_32(hw_apbh_ch5_debug2) + mxs_reg_32(hw_apbh_ch6_curcmdar) + mxs_reg_32(hw_apbh_ch6_nxtcmdar) + mxs_reg_32(hw_apbh_ch6_cmd) + mxs_reg_32(hw_apbh_ch6_bar) + mxs_reg_32(hw_apbh_ch6_sema) + mxs_reg_32(hw_apbh_ch6_debug1) + mxs_reg_32(hw_apbh_ch6_debug2) + mxs_reg_32(hw_apbh_ch7_curcmdar) + mxs_reg_32(hw_apbh_ch7_nxtcmdar) + mxs_reg_32(hw_apbh_ch7_cmd) + mxs_reg_32(hw_apbh_ch7_bar) + mxs_reg_32(hw_apbh_ch7_sema) + mxs_reg_32(hw_apbh_ch7_debug1) + mxs_reg_32(hw_apbh_ch7_debug2) + mxs_reg_32(hw_apbh_ch8_curcmdar) + mxs_reg_32(hw_apbh_ch8_nxtcmdar) + mxs_reg_32(hw_apbh_ch8_cmd) + mxs_reg_32(hw_apbh_ch8_bar) + mxs_reg_32(hw_apbh_ch8_sema) + mxs_reg_32(hw_apbh_ch8_debug1) + mxs_reg_32(hw_apbh_ch8_debug2) + mxs_reg_32(hw_apbh_ch9_curcmdar) + mxs_reg_32(hw_apbh_ch9_nxtcmdar) + mxs_reg_32(hw_apbh_ch9_cmd) + mxs_reg_32(hw_apbh_ch9_bar) + mxs_reg_32(hw_apbh_ch9_sema) + mxs_reg_32(hw_apbh_ch9_debug1) + mxs_reg_32(hw_apbh_ch9_debug2) + mxs_reg_32(hw_apbh_ch10_curcmdar) + mxs_reg_32(hw_apbh_ch10_nxtcmdar) + mxs_reg_32(hw_apbh_ch10_cmd) + mxs_reg_32(hw_apbh_ch10_bar) + mxs_reg_32(hw_apbh_ch10_sema) + mxs_reg_32(hw_apbh_ch10_debug1) + mxs_reg_32(hw_apbh_ch10_debug2) + mxs_reg_32(hw_apbh_ch11_curcmdar) + mxs_reg_32(hw_apbh_ch11_nxtcmdar) + mxs_reg_32(hw_apbh_ch11_cmd) + mxs_reg_32(hw_apbh_ch11_bar) + mxs_reg_32(hw_apbh_ch11_sema) + mxs_reg_32(hw_apbh_ch11_debug1) + mxs_reg_32(hw_apbh_ch11_debug2) + mxs_reg_32(hw_apbh_ch12_curcmdar) + mxs_reg_32(hw_apbh_ch12_nxtcmdar) + mxs_reg_32(hw_apbh_ch12_cmd) + mxs_reg_32(hw_apbh_ch12_bar) + mxs_reg_32(hw_apbh_ch12_sema) + mxs_reg_32(hw_apbh_ch12_debug1) + mxs_reg_32(hw_apbh_ch12_debug2) + mxs_reg_32(hw_apbh_ch13_curcmdar) + mxs_reg_32(hw_apbh_ch13_nxtcmdar) + mxs_reg_32(hw_apbh_ch13_cmd) + mxs_reg_32(hw_apbh_ch13_bar) + mxs_reg_32(hw_apbh_ch13_sema) + mxs_reg_32(hw_apbh_ch13_debug1) + mxs_reg_32(hw_apbh_ch13_debug2) + mxs_reg_32(hw_apbh_ch14_curcmdar) + mxs_reg_32(hw_apbh_ch14_nxtcmdar) + mxs_reg_32(hw_apbh_ch14_cmd) + mxs_reg_32(hw_apbh_ch14_bar) + mxs_reg_32(hw_apbh_ch14_sema) + mxs_reg_32(hw_apbh_ch14_debug1) + mxs_reg_32(hw_apbh_ch14_debug2) + mxs_reg_32(hw_apbh_ch15_curcmdar) + mxs_reg_32(hw_apbh_ch15_nxtcmdar) + mxs_reg_32(hw_apbh_ch15_cmd) + mxs_reg_32(hw_apbh_ch15_bar) + mxs_reg_32(hw_apbh_ch15_sema) + mxs_reg_32(hw_apbh_ch15_debug1) + mxs_reg_32(hw_apbh_ch15_debug2) }; }; - mx28_reg_32(hw_apbh_version) + mxs_reg_32(hw_apbh_version) }; #endif diff --git a/arch/arm/include/asm/arch-mx28/regs-base.h b/arch/arm/include/asm/arch-mxs/regs-base.h index dbdcc2b5bd..dbdcc2b5bd 100644 --- a/arch/arm/include/asm/arch-mx28/regs-base.h +++ b/arch/arm/include/asm/arch-mxs/regs-base.h diff --git a/arch/arm/include/asm/arch-mx28/regs-bch.h b/arch/arm/include/asm/arch-mxs/regs-bch.h index 9243bdd1c0..40baa4d1f9 100644 --- a/arch/arm/include/asm/arch-mx28/regs-bch.h +++ b/arch/arm/include/asm/arch-mxs/regs-bch.h @@ -29,31 +29,31 @@ #include <asm/arch/regs-common.h> #ifndef __ASSEMBLY__ -struct mx28_bch_regs { - mx28_reg_32(hw_bch_ctrl) - mx28_reg_32(hw_bch_status0) - mx28_reg_32(hw_bch_mode) - mx28_reg_32(hw_bch_encodeptr) - mx28_reg_32(hw_bch_dataptr) - mx28_reg_32(hw_bch_metaptr) +struct mxs_bch_regs { + mxs_reg_32(hw_bch_ctrl) + mxs_reg_32(hw_bch_status0) + mxs_reg_32(hw_bch_mode) + mxs_reg_32(hw_bch_encodeptr) + mxs_reg_32(hw_bch_dataptr) + mxs_reg_32(hw_bch_metaptr) uint32_t reserved[4]; - mx28_reg_32(hw_bch_layoutselect) - mx28_reg_32(hw_bch_flash0layout0) - mx28_reg_32(hw_bch_flash0layout1) - mx28_reg_32(hw_bch_flash1layout0) - mx28_reg_32(hw_bch_flash1layout1) - mx28_reg_32(hw_bch_flash2layout0) - mx28_reg_32(hw_bch_flash2layout1) - mx28_reg_32(hw_bch_flash3layout0) - mx28_reg_32(hw_bch_flash3layout1) - mx28_reg_32(hw_bch_dbgkesread) - mx28_reg_32(hw_bch_dbgcsferead) - mx28_reg_32(hw_bch_dbgsyndegread) - mx28_reg_32(hw_bch_dbgahbmread) - mx28_reg_32(hw_bch_blockname) - mx28_reg_32(hw_bch_version) + mxs_reg_32(hw_bch_layoutselect) + mxs_reg_32(hw_bch_flash0layout0) + mxs_reg_32(hw_bch_flash0layout1) + mxs_reg_32(hw_bch_flash1layout0) + mxs_reg_32(hw_bch_flash1layout1) + mxs_reg_32(hw_bch_flash2layout0) + mxs_reg_32(hw_bch_flash2layout1) + mxs_reg_32(hw_bch_flash3layout0) + mxs_reg_32(hw_bch_flash3layout1) + mxs_reg_32(hw_bch_dbgkesread) + mxs_reg_32(hw_bch_dbgcsferead) + mxs_reg_32(hw_bch_dbgsyndegread) + mxs_reg_32(hw_bch_dbgahbmread) + mxs_reg_32(hw_bch_blockname) + mxs_reg_32(hw_bch_version) }; #endif diff --git a/arch/arm/include/asm/arch-mx28/regs-clkctrl.h b/arch/arm/include/asm/arch-mxs/regs-clkctrl-mx28.h index 3c4947df26..b662fbe440 100644 --- a/arch/arm/include/asm/arch-mx28/regs-clkctrl.h +++ b/arch/arm/include/asm/arch-mxs/regs-clkctrl-mx28.h @@ -29,39 +29,39 @@ #include <asm/arch/regs-common.h> #ifndef __ASSEMBLY__ -struct mx28_clkctrl_regs { - mx28_reg_32(hw_clkctrl_pll0ctrl0) /* 0x00 */ - mx28_reg_32(hw_clkctrl_pll0ctrl1) /* 0x10 */ - mx28_reg_32(hw_clkctrl_pll1ctrl0) /* 0x20 */ - mx28_reg_32(hw_clkctrl_pll1ctrl1) /* 0x30 */ - mx28_reg_32(hw_clkctrl_pll2ctrl0) /* 0x40 */ - mx28_reg_32(hw_clkctrl_cpu) /* 0x50 */ - mx28_reg_32(hw_clkctrl_hbus) /* 0x60 */ - mx28_reg_32(hw_clkctrl_xbus) /* 0x70 */ - mx28_reg_32(hw_clkctrl_xtal) /* 0x80 */ - mx28_reg_32(hw_clkctrl_ssp0) /* 0x90 */ - mx28_reg_32(hw_clkctrl_ssp1) /* 0xa0 */ - mx28_reg_32(hw_clkctrl_ssp2) /* 0xb0 */ - mx28_reg_32(hw_clkctrl_ssp3) /* 0xc0 */ - mx28_reg_32(hw_clkctrl_gpmi) /* 0xd0 */ - mx28_reg_32(hw_clkctrl_spdif) /* 0xe0 */ - mx28_reg_32(hw_clkctrl_emi) /* 0xf0 */ - mx28_reg_32(hw_clkctrl_saif0) /* 0x100 */ - mx28_reg_32(hw_clkctrl_saif1) /* 0x110 */ - mx28_reg_32(hw_clkctrl_lcdif) /* 0x120 */ - mx28_reg_32(hw_clkctrl_etm) /* 0x130 */ - mx28_reg_32(hw_clkctrl_enet) /* 0x140 */ - mx28_reg_32(hw_clkctrl_hsadc) /* 0x150 */ - mx28_reg_32(hw_clkctrl_flexcan) /* 0x160 */ +struct mxs_clkctrl_regs { + mxs_reg_32(hw_clkctrl_pll0ctrl0) /* 0x00 */ + mxs_reg_32(hw_clkctrl_pll0ctrl1) /* 0x10 */ + mxs_reg_32(hw_clkctrl_pll1ctrl0) /* 0x20 */ + mxs_reg_32(hw_clkctrl_pll1ctrl1) /* 0x30 */ + mxs_reg_32(hw_clkctrl_pll2ctrl0) /* 0x40 */ + mxs_reg_32(hw_clkctrl_cpu) /* 0x50 */ + mxs_reg_32(hw_clkctrl_hbus) /* 0x60 */ + mxs_reg_32(hw_clkctrl_xbus) /* 0x70 */ + mxs_reg_32(hw_clkctrl_xtal) /* 0x80 */ + mxs_reg_32(hw_clkctrl_ssp0) /* 0x90 */ + mxs_reg_32(hw_clkctrl_ssp1) /* 0xa0 */ + mxs_reg_32(hw_clkctrl_ssp2) /* 0xb0 */ + mxs_reg_32(hw_clkctrl_ssp3) /* 0xc0 */ + mxs_reg_32(hw_clkctrl_gpmi) /* 0xd0 */ + mxs_reg_32(hw_clkctrl_spdif) /* 0xe0 */ + mxs_reg_32(hw_clkctrl_emi) /* 0xf0 */ + mxs_reg_32(hw_clkctrl_saif0) /* 0x100 */ + mxs_reg_32(hw_clkctrl_saif1) /* 0x110 */ + mxs_reg_32(hw_clkctrl_lcdif) /* 0x120 */ + mxs_reg_32(hw_clkctrl_etm) /* 0x130 */ + mxs_reg_32(hw_clkctrl_enet) /* 0x140 */ + mxs_reg_32(hw_clkctrl_hsadc) /* 0x150 */ + mxs_reg_32(hw_clkctrl_flexcan) /* 0x160 */ uint32_t reserved[16]; - mx28_reg_8(hw_clkctrl_frac0) /* 0x1b0 */ - mx28_reg_8(hw_clkctrl_frac1) /* 0x1c0 */ - mx28_reg_32(hw_clkctrl_clkseq) /* 0x1d0 */ - mx28_reg_32(hw_clkctrl_reset) /* 0x1e0 */ - mx28_reg_32(hw_clkctrl_status) /* 0x1f0 */ - mx28_reg_32(hw_clkctrl_version) /* 0x200 */ + mxs_reg_8(hw_clkctrl_frac0) /* 0x1b0 */ + mxs_reg_8(hw_clkctrl_frac1) /* 0x1c0 */ + mxs_reg_32(hw_clkctrl_clkseq) /* 0x1d0 */ + mxs_reg_32(hw_clkctrl_reset) /* 0x1e0 */ + mxs_reg_32(hw_clkctrl_status) /* 0x1f0 */ + mxs_reg_32(hw_clkctrl_version) /* 0x200 */ }; #endif diff --git a/arch/arm/include/asm/arch-mx28/regs-common.h b/arch/arm/include/asm/arch-mxs/regs-common.h index d2e19538af..bcea419f99 100644 --- a/arch/arm/include/asm/arch-mx28/regs-common.h +++ b/arch/arm/include/asm/arch-mxs/regs-common.h @@ -1,5 +1,5 @@ /* - * Freescale i.MX28 Register Accessors + * Freescale i.MXS Register Accessors * * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> * on behalf of DENX Software Engineering GmbH @@ -20,11 +20,11 @@ * */ -#ifndef __MX28_REGS_COMMON_H__ -#define __MX28_REGS_COMMON_H__ +#ifndef __MXS_REGS_COMMON_H__ +#define __MXS_REGS_COMMON_H__ /* - * The i.MX28 has interesting feature when it comes to register access. There + * The i.MXS has interesting feature when it comes to register access. There * are four kinds of access to one particular register. Those are: * * 1) Common read/write access. To use this mode, just write to the address of @@ -47,36 +47,36 @@ * */ -#define __mx28_reg_8(name) \ +#define __mxs_reg_8(name) \ uint8_t name[4]; \ uint8_t name##_set[4]; \ uint8_t name##_clr[4]; \ uint8_t name##_tog[4]; \ -#define __mx28_reg_32(name) \ +#define __mxs_reg_32(name) \ uint32_t name; \ uint32_t name##_set; \ uint32_t name##_clr; \ uint32_t name##_tog; -struct mx28_register_8 { - __mx28_reg_8(reg) +struct mxs_register_8 { + __mxs_reg_8(reg) }; -struct mx28_register_32 { - __mx28_reg_32(reg) +struct mxs_register_32 { + __mxs_reg_32(reg) }; -#define mx28_reg_8(name) \ +#define mxs_reg_8(name) \ union { \ - struct { __mx28_reg_8(name) }; \ - struct mx28_register_8 name##_reg; \ + struct { __mxs_reg_8(name) }; \ + struct mxs_register_8 name##_reg; \ }; -#define mx28_reg_32(name) \ +#define mxs_reg_32(name) \ union { \ - struct { __mx28_reg_32(name) }; \ - struct mx28_register_32 name##_reg; \ + struct { __mxs_reg_32(name) }; \ + struct mxs_register_32 name##_reg; \ }; -#endif /* __MX28_REGS_COMMON_H__ */ +#endif /* __MXS_REGS_COMMON_H__ */ diff --git a/arch/arm/include/asm/arch-mx28/regs-digctl.h b/arch/arm/include/asm/arch-mxs/regs-digctl.h index 9a63594d04..e7cc4b45d5 100644 --- a/arch/arm/include/asm/arch-mx28/regs-digctl.h +++ b/arch/arm/include/asm/arch-mxs/regs-digctl.h @@ -25,17 +25,17 @@ #include <asm/arch/regs-common.h> #ifndef __ASSEMBLY__ -struct mx28_digctl_regs { - mx28_reg_32(hw_digctl_ctrl) /* 0x000 */ - mx28_reg_32(hw_digctl_status) /* 0x010 */ - mx28_reg_32(hw_digctl_hclkcount) /* 0x020 */ - mx28_reg_32(hw_digctl_ramctrl) /* 0x030 */ - mx28_reg_32(hw_digctl_emi_status) /* 0x040 */ - mx28_reg_32(hw_digctl_read_margin) /* 0x050 */ +struct mxs_digctl_regs { + mxs_reg_32(hw_digctl_ctrl) /* 0x000 */ + mxs_reg_32(hw_digctl_status) /* 0x010 */ + mxs_reg_32(hw_digctl_hclkcount) /* 0x020 */ + mxs_reg_32(hw_digctl_ramctrl) /* 0x030 */ + mxs_reg_32(hw_digctl_emi_status) /* 0x040 */ + mxs_reg_32(hw_digctl_read_margin) /* 0x050 */ uint32_t hw_digctl_writeonce; /* 0x060 */ uint32_t reserved_writeonce[3]; - mx28_reg_32(hw_digctl_bist_ctl) /* 0x070 */ - mx28_reg_32(hw_digctl_bist_status) /* 0x080 */ + mxs_reg_32(hw_digctl_bist_ctl) /* 0x070 */ + mxs_reg_32(hw_digctl_bist_status) /* 0x080 */ uint32_t hw_digctl_entropy; /* 0x090 */ uint32_t reserved_entropy[3]; uint32_t hw_digctl_entropy_latched; /* 0x0a0 */ @@ -43,7 +43,7 @@ struct mx28_digctl_regs { uint32_t reserved1[4]; - mx28_reg_32(hw_digctl_microseconds) /* 0x0c0 */ + mxs_reg_32(hw_digctl_microseconds) /* 0x0c0 */ uint32_t hw_digctl_dbgrd; /* 0x0d0 */ uint32_t reserved_hw_digctl_dbgrd[3]; uint32_t hw_digctl_dbg; /* 0x0e0 */ @@ -51,21 +51,21 @@ struct mx28_digctl_regs { uint32_t reserved2[4]; - mx28_reg_32(hw_digctl_usb_loopback) /* 0x100 */ - mx28_reg_32(hw_digctl_ocram_status0) /* 0x110 */ - mx28_reg_32(hw_digctl_ocram_status1) /* 0x120 */ - mx28_reg_32(hw_digctl_ocram_status2) /* 0x130 */ - mx28_reg_32(hw_digctl_ocram_status3) /* 0x140 */ - mx28_reg_32(hw_digctl_ocram_status4) /* 0x150 */ - mx28_reg_32(hw_digctl_ocram_status5) /* 0x160 */ - mx28_reg_32(hw_digctl_ocram_status6) /* 0x170 */ - mx28_reg_32(hw_digctl_ocram_status7) /* 0x180 */ - mx28_reg_32(hw_digctl_ocram_status8) /* 0x190 */ - mx28_reg_32(hw_digctl_ocram_status9) /* 0x1a0 */ - mx28_reg_32(hw_digctl_ocram_status10) /* 0x1b0 */ - mx28_reg_32(hw_digctl_ocram_status11) /* 0x1c0 */ - mx28_reg_32(hw_digctl_ocram_status12) /* 0x1d0 */ - mx28_reg_32(hw_digctl_ocram_status13) /* 0x1e0 */ + mxs_reg_32(hw_digctl_usb_loopback) /* 0x100 */ + mxs_reg_32(hw_digctl_ocram_status0) /* 0x110 */ + mxs_reg_32(hw_digctl_ocram_status1) /* 0x120 */ + mxs_reg_32(hw_digctl_ocram_status2) /* 0x130 */ + mxs_reg_32(hw_digctl_ocram_status3) /* 0x140 */ + mxs_reg_32(hw_digctl_ocram_status4) /* 0x150 */ + mxs_reg_32(hw_digctl_ocram_status5) /* 0x160 */ + mxs_reg_32(hw_digctl_ocram_status6) /* 0x170 */ + mxs_reg_32(hw_digctl_ocram_status7) /* 0x180 */ + mxs_reg_32(hw_digctl_ocram_status8) /* 0x190 */ + mxs_reg_32(hw_digctl_ocram_status9) /* 0x1a0 */ + mxs_reg_32(hw_digctl_ocram_status10) /* 0x1b0 */ + mxs_reg_32(hw_digctl_ocram_status11) /* 0x1c0 */ + mxs_reg_32(hw_digctl_ocram_status12) /* 0x1d0 */ + mxs_reg_32(hw_digctl_ocram_status13) /* 0x1e0 */ uint32_t reserved3[36]; @@ -75,7 +75,7 @@ struct mx28_digctl_regs { uint32_t reserved_hw_digctl_scratch1[3]; uint32_t hw_digctl_armcache; /* 0x2a0 */ uint32_t reserved_hw_digctl_armcache[3]; - mx28_reg_32(hw_digctl_debug_trap) /* 0x2b0 */ + mxs_reg_32(hw_digctl_debug_trap) /* 0x2b0 */ uint32_t hw_digctl_debug_trap_l0_addr_low; /* 0x2c0 */ uint32_t reserved_hw_digctl_debug_trap_l0_addr_low[3]; uint32_t hw_digctl_debug_trap_l0_addr_high; /* 0x2d0 */ @@ -152,4 +152,8 @@ struct mx28_digctl_regs { }; #endif +/* Product code identification */ +#define HW_DIGCTL_CHIPID_MASK (0xffff << 16) +#define HW_DIGCTL_CHIPID_MX28 (0x2800 << 16) + #endif /* __MX28_REGS_DIGCTL_H__ */ diff --git a/arch/arm/include/asm/arch-mx28/regs-gpmi.h b/arch/arm/include/asm/arch-mxs/regs-gpmi.h index 1b487f46c6..624d618560 100644 --- a/arch/arm/include/asm/arch-mx28/regs-gpmi.h +++ b/arch/arm/include/asm/arch-mxs/regs-gpmi.h @@ -29,23 +29,23 @@ #include <asm/arch/regs-common.h> #ifndef __ASSEMBLY__ -struct mx28_gpmi_regs { - mx28_reg_32(hw_gpmi_ctrl0) - mx28_reg_32(hw_gpmi_compare) - mx28_reg_32(hw_gpmi_eccctrl) - mx28_reg_32(hw_gpmi_ecccount) - mx28_reg_32(hw_gpmi_payload) - mx28_reg_32(hw_gpmi_auxiliary) - mx28_reg_32(hw_gpmi_ctrl1) - mx28_reg_32(hw_gpmi_timing0) - mx28_reg_32(hw_gpmi_timing1) +struct mxs_gpmi_regs { + mxs_reg_32(hw_gpmi_ctrl0) + mxs_reg_32(hw_gpmi_compare) + mxs_reg_32(hw_gpmi_eccctrl) + mxs_reg_32(hw_gpmi_ecccount) + mxs_reg_32(hw_gpmi_payload) + mxs_reg_32(hw_gpmi_auxiliary) + mxs_reg_32(hw_gpmi_ctrl1) + mxs_reg_32(hw_gpmi_timing0) + mxs_reg_32(hw_gpmi_timing1) uint32_t reserved[4]; - mx28_reg_32(hw_gpmi_data) - mx28_reg_32(hw_gpmi_stat) - mx28_reg_32(hw_gpmi_debug) - mx28_reg_32(hw_gpmi_version) + mxs_reg_32(hw_gpmi_data) + mxs_reg_32(hw_gpmi_stat) + mxs_reg_32(hw_gpmi_debug) + mxs_reg_32(hw_gpmi_version) }; #endif diff --git a/arch/arm/include/asm/arch-mx28/regs-i2c.h b/arch/arm/include/asm/arch-mxs/regs-i2c.h index 2e2e81453d..067cfd3947 100644 --- a/arch/arm/include/asm/arch-mx28/regs-i2c.h +++ b/arch/arm/include/asm/arch-mxs/regs-i2c.h @@ -26,21 +26,21 @@ #include <asm/arch/regs-common.h> #ifndef __ASSEMBLY__ -struct mx28_i2c_regs { - mx28_reg_32(hw_i2c_ctrl0) - mx28_reg_32(hw_i2c_timing0) - mx28_reg_32(hw_i2c_timing1) - mx28_reg_32(hw_i2c_timing2) - mx28_reg_32(hw_i2c_ctrl1) - mx28_reg_32(hw_i2c_stat) - mx28_reg_32(hw_i2c_queuectrl) - mx28_reg_32(hw_i2c_queuestat) - mx28_reg_32(hw_i2c_queuecmd) - mx28_reg_32(hw_i2c_queuedata) - mx28_reg_32(hw_i2c_data) - mx28_reg_32(hw_i2c_debug0) - mx28_reg_32(hw_i2c_debug1) - mx28_reg_32(hw_i2c_version) +struct mxs_i2c_regs { + mxs_reg_32(hw_i2c_ctrl0) + mxs_reg_32(hw_i2c_timing0) + mxs_reg_32(hw_i2c_timing1) + mxs_reg_32(hw_i2c_timing2) + mxs_reg_32(hw_i2c_ctrl1) + mxs_reg_32(hw_i2c_stat) + mxs_reg_32(hw_i2c_queuectrl) + mxs_reg_32(hw_i2c_queuestat) + mxs_reg_32(hw_i2c_queuecmd) + mxs_reg_32(hw_i2c_queuedata) + mxs_reg_32(hw_i2c_data) + mxs_reg_32(hw_i2c_debug0) + mxs_reg_32(hw_i2c_debug1) + mxs_reg_32(hw_i2c_version) }; #endif diff --git a/arch/arm/include/asm/arch-mx28/regs-lcdif.h b/arch/arm/include/asm/arch-mxs/regs-lcdif.h index cb47e41fdc..b90b2d437a 100644 --- a/arch/arm/include/asm/arch-mx28/regs-lcdif.h +++ b/arch/arm/include/asm/arch-mxs/regs-lcdif.h @@ -29,39 +29,39 @@ #include <asm/arch/regs-common.h> #ifndef __ASSEMBLY__ -struct mx28_lcdif_regs { - mx28_reg_32(hw_lcdif_ctrl) /* 0x00 */ - mx28_reg_32(hw_lcdif_ctrl1) /* 0x10 */ - mx28_reg_32(hw_lcdif_ctrl2) /* 0x20 */ - mx28_reg_32(hw_lcdif_transfer_count) /* 0x30 */ - mx28_reg_32(hw_lcdif_cur_buf) /* 0x40 */ - mx28_reg_32(hw_lcdif_next_buf) /* 0x50 */ - mx28_reg_32(hw_lcdif_timing) /* 0x60 */ - mx28_reg_32(hw_lcdif_vdctrl0) /* 0x70 */ - mx28_reg_32(hw_lcdif_vdctrl1) /* 0x80 */ - mx28_reg_32(hw_lcdif_vdctrl2) /* 0x90 */ - mx28_reg_32(hw_lcdif_vdctrl3) /* 0xa0 */ - mx28_reg_32(hw_lcdif_vdctrl4) /* 0xb0 */ - mx28_reg_32(hw_lcdif_dvictrl0) /* 0xc0 */ - mx28_reg_32(hw_lcdif_dvictrl1) /* 0xd0 */ - mx28_reg_32(hw_lcdif_dvictrl2) /* 0xe0 */ - mx28_reg_32(hw_lcdif_dvictrl3) /* 0xf0 */ - mx28_reg_32(hw_lcdif_dvictrl4) /* 0x100 */ - mx28_reg_32(hw_lcdif_csc_coeffctrl0) /* 0x110 */ - mx28_reg_32(hw_lcdif_csc_coeffctrl1) /* 0x120 */ - mx28_reg_32(hw_lcdif_csc_coeffctrl2) /* 0x130 */ - mx28_reg_32(hw_lcdif_csc_coeffctrl3) /* 0x140 */ - mx28_reg_32(hw_lcdif_csc_coeffctrl4) /* 0x150 */ - mx28_reg_32(hw_lcdif_csc_offset) /* 0x160 */ - mx28_reg_32(hw_lcdif_csc_limit) /* 0x170 */ - mx28_reg_32(hw_lcdif_data) /* 0x180 */ - mx28_reg_32(hw_lcdif_bm_error_stat) /* 0x190 */ - mx28_reg_32(hw_lcdif_crc_stat) /* 0x1a0 */ - mx28_reg_32(hw_lcdif_lcdif_stat) /* 0x1b0 */ - mx28_reg_32(hw_lcdif_version) /* 0x1c0 */ - mx28_reg_32(hw_lcdif_debug0) /* 0x1d0 */ - mx28_reg_32(hw_lcdif_debug1) /* 0x1e0 */ - mx28_reg_32(hw_lcdif_debug2) /* 0x1f0 */ +struct mxs_lcdif_regs { + mxs_reg_32(hw_lcdif_ctrl) /* 0x00 */ + mxs_reg_32(hw_lcdif_ctrl1) /* 0x10 */ + mxs_reg_32(hw_lcdif_ctrl2) /* 0x20 */ + mxs_reg_32(hw_lcdif_transfer_count) /* 0x30 */ + mxs_reg_32(hw_lcdif_cur_buf) /* 0x40 */ + mxs_reg_32(hw_lcdif_next_buf) /* 0x50 */ + mxs_reg_32(hw_lcdif_timing) /* 0x60 */ + mxs_reg_32(hw_lcdif_vdctrl0) /* 0x70 */ + mxs_reg_32(hw_lcdif_vdctrl1) /* 0x80 */ + mxs_reg_32(hw_lcdif_vdctrl2) /* 0x90 */ + mxs_reg_32(hw_lcdif_vdctrl3) /* 0xa0 */ + mxs_reg_32(hw_lcdif_vdctrl4) /* 0xb0 */ + mxs_reg_32(hw_lcdif_dvictrl0) /* 0xc0 */ + mxs_reg_32(hw_lcdif_dvictrl1) /* 0xd0 */ + mxs_reg_32(hw_lcdif_dvictrl2) /* 0xe0 */ + mxs_reg_32(hw_lcdif_dvictrl3) /* 0xf0 */ + mxs_reg_32(hw_lcdif_dvictrl4) /* 0x100 */ + mxs_reg_32(hw_lcdif_csc_coeffctrl0) /* 0x110 */ + mxs_reg_32(hw_lcdif_csc_coeffctrl1) /* 0x120 */ + mxs_reg_32(hw_lcdif_csc_coeffctrl2) /* 0x130 */ + mxs_reg_32(hw_lcdif_csc_coeffctrl3) /* 0x140 */ + mxs_reg_32(hw_lcdif_csc_coeffctrl4) /* 0x150 */ + mxs_reg_32(hw_lcdif_csc_offset) /* 0x160 */ + mxs_reg_32(hw_lcdif_csc_limit) /* 0x170 */ + mxs_reg_32(hw_lcdif_data) /* 0x180 */ + mxs_reg_32(hw_lcdif_bm_error_stat) /* 0x190 */ + mxs_reg_32(hw_lcdif_crc_stat) /* 0x1a0 */ + mxs_reg_32(hw_lcdif_lcdif_stat) /* 0x1b0 */ + mxs_reg_32(hw_lcdif_version) /* 0x1c0 */ + mxs_reg_32(hw_lcdif_debug0) /* 0x1d0 */ + mxs_reg_32(hw_lcdif_debug1) /* 0x1e0 */ + mxs_reg_32(hw_lcdif_debug2) /* 0x1f0 */ }; #endif diff --git a/arch/arm/include/asm/arch-mx28/regs-lradc.h b/arch/arm/include/asm/arch-mxs/regs-lradc.h index 16e2bbf4cb..28d8382422 100644 --- a/arch/arm/include/asm/arch-mx28/regs-lradc.h +++ b/arch/arm/include/asm/arch-mxs/regs-lradc.h @@ -29,31 +29,31 @@ #include <asm/arch/regs-common.h> #ifndef __ASSEMBLY__ -struct mx28_lradc_regs { - mx28_reg_32(hw_lradc_ctrl0); - mx28_reg_32(hw_lradc_ctrl1); - mx28_reg_32(hw_lradc_ctrl2); - mx28_reg_32(hw_lradc_ctrl3); - mx28_reg_32(hw_lradc_status); - mx28_reg_32(hw_lradc_ch0); - mx28_reg_32(hw_lradc_ch1); - mx28_reg_32(hw_lradc_ch2); - mx28_reg_32(hw_lradc_ch3); - mx28_reg_32(hw_lradc_ch4); - mx28_reg_32(hw_lradc_ch5); - mx28_reg_32(hw_lradc_ch6); - mx28_reg_32(hw_lradc_ch7); - mx28_reg_32(hw_lradc_delay0); - mx28_reg_32(hw_lradc_delay1); - mx28_reg_32(hw_lradc_delay2); - mx28_reg_32(hw_lradc_delay3); - mx28_reg_32(hw_lradc_debug0); - mx28_reg_32(hw_lradc_debug1); - mx28_reg_32(hw_lradc_conversion); - mx28_reg_32(hw_lradc_ctrl4); - mx28_reg_32(hw_lradc_treshold0); - mx28_reg_32(hw_lradc_treshold1); - mx28_reg_32(hw_lradc_version); +struct mxs_lradc_regs { + mxs_reg_32(hw_lradc_ctrl0); + mxs_reg_32(hw_lradc_ctrl1); + mxs_reg_32(hw_lradc_ctrl2); + mxs_reg_32(hw_lradc_ctrl3); + mxs_reg_32(hw_lradc_status); + mxs_reg_32(hw_lradc_ch0); + mxs_reg_32(hw_lradc_ch1); + mxs_reg_32(hw_lradc_ch2); + mxs_reg_32(hw_lradc_ch3); + mxs_reg_32(hw_lradc_ch4); + mxs_reg_32(hw_lradc_ch5); + mxs_reg_32(hw_lradc_ch6); + mxs_reg_32(hw_lradc_ch7); + mxs_reg_32(hw_lradc_delay0); + mxs_reg_32(hw_lradc_delay1); + mxs_reg_32(hw_lradc_delay2); + mxs_reg_32(hw_lradc_delay3); + mxs_reg_32(hw_lradc_debug0); + mxs_reg_32(hw_lradc_debug1); + mxs_reg_32(hw_lradc_conversion); + mxs_reg_32(hw_lradc_ctrl4); + mxs_reg_32(hw_lradc_treshold0); + mxs_reg_32(hw_lradc_treshold1); + mxs_reg_32(hw_lradc_version); }; #endif diff --git a/arch/arm/include/asm/arch-mx28/regs-ocotp.h b/arch/arm/include/asm/arch-mxs/regs-ocotp.h index 2738035519..3269892f99 100644 --- a/arch/arm/include/asm/arch-mx28/regs-ocotp.h +++ b/arch/arm/include/asm/arch-mxs/regs-ocotp.h @@ -29,50 +29,50 @@ #include <asm/arch/regs-common.h> #ifndef __ASSEMBLY__ -struct mx28_ocotp_regs { - mx28_reg_32(hw_ocotp_ctrl) /* 0x0 */ - mx28_reg_32(hw_ocotp_data) /* 0x10 */ - mx28_reg_32(hw_ocotp_cust0) /* 0x20 */ - mx28_reg_32(hw_ocotp_cust1) /* 0x30 */ - mx28_reg_32(hw_ocotp_cust2) /* 0x40 */ - mx28_reg_32(hw_ocotp_cust3) /* 0x50 */ - mx28_reg_32(hw_ocotp_crypto0) /* 0x60 */ - mx28_reg_32(hw_ocotp_crypto1) /* 0x70 */ - mx28_reg_32(hw_ocotp_crypto2) /* 0x80 */ - mx28_reg_32(hw_ocotp_crypto3) /* 0x90 */ - mx28_reg_32(hw_ocotp_hwcap0) /* 0xa0 */ - mx28_reg_32(hw_ocotp_hwcap1) /* 0xb0 */ - mx28_reg_32(hw_ocotp_hwcap2) /* 0xc0 */ - mx28_reg_32(hw_ocotp_hwcap3) /* 0xd0 */ - mx28_reg_32(hw_ocotp_hwcap4) /* 0xe0 */ - mx28_reg_32(hw_ocotp_hwcap5) /* 0xf0 */ - mx28_reg_32(hw_ocotp_swcap) /* 0x100 */ - mx28_reg_32(hw_ocotp_custcap) /* 0x110 */ - mx28_reg_32(hw_ocotp_lock) /* 0x120 */ - mx28_reg_32(hw_ocotp_ops0) /* 0x130 */ - mx28_reg_32(hw_ocotp_ops1) /* 0x140 */ - mx28_reg_32(hw_ocotp_ops2) /* 0x150 */ - mx28_reg_32(hw_ocotp_ops3) /* 0x160 */ - mx28_reg_32(hw_ocotp_un0) /* 0x170 */ - mx28_reg_32(hw_ocotp_un1) /* 0x180 */ - mx28_reg_32(hw_ocotp_un2) /* 0x190 */ - mx28_reg_32(hw_ocotp_rom0) /* 0x1a0 */ - mx28_reg_32(hw_ocotp_rom1) /* 0x1b0 */ - mx28_reg_32(hw_ocotp_rom2) /* 0x1c0 */ - mx28_reg_32(hw_ocotp_rom3) /* 0x1d0 */ - mx28_reg_32(hw_ocotp_rom4) /* 0x1e0 */ - mx28_reg_32(hw_ocotp_rom5) /* 0x1f0 */ - mx28_reg_32(hw_ocotp_rom6) /* 0x200 */ - mx28_reg_32(hw_ocotp_rom7) /* 0x210 */ - mx28_reg_32(hw_ocotp_srk0) /* 0x220 */ - mx28_reg_32(hw_ocotp_srk1) /* 0x230 */ - mx28_reg_32(hw_ocotp_srk2) /* 0x240 */ - mx28_reg_32(hw_ocotp_srk3) /* 0x250 */ - mx28_reg_32(hw_ocotp_srk4) /* 0x260 */ - mx28_reg_32(hw_ocotp_srk5) /* 0x270 */ - mx28_reg_32(hw_ocotp_srk6) /* 0x280 */ - mx28_reg_32(hw_ocotp_srk7) /* 0x290 */ - mx28_reg_32(hw_ocotp_version) /* 0x2a0 */ +struct mxs_ocotp_regs { + mxs_reg_32(hw_ocotp_ctrl) /* 0x0 */ + mxs_reg_32(hw_ocotp_data) /* 0x10 */ + mxs_reg_32(hw_ocotp_cust0) /* 0x20 */ + mxs_reg_32(hw_ocotp_cust1) /* 0x30 */ + mxs_reg_32(hw_ocotp_cust2) /* 0x40 */ + mxs_reg_32(hw_ocotp_cust3) /* 0x50 */ + mxs_reg_32(hw_ocotp_crypto0) /* 0x60 */ + mxs_reg_32(hw_ocotp_crypto1) /* 0x70 */ + mxs_reg_32(hw_ocotp_crypto2) /* 0x80 */ + mxs_reg_32(hw_ocotp_crypto3) /* 0x90 */ + mxs_reg_32(hw_ocotp_hwcap0) /* 0xa0 */ + mxs_reg_32(hw_ocotp_hwcap1) /* 0xb0 */ + mxs_reg_32(hw_ocotp_hwcap2) /* 0xc0 */ + mxs_reg_32(hw_ocotp_hwcap3) /* 0xd0 */ + mxs_reg_32(hw_ocotp_hwcap4) /* 0xe0 */ + mxs_reg_32(hw_ocotp_hwcap5) /* 0xf0 */ + mxs_reg_32(hw_ocotp_swcap) /* 0x100 */ + mxs_reg_32(hw_ocotp_custcap) /* 0x110 */ + mxs_reg_32(hw_ocotp_lock) /* 0x120 */ + mxs_reg_32(hw_ocotp_ops0) /* 0x130 */ + mxs_reg_32(hw_ocotp_ops1) /* 0x140 */ + mxs_reg_32(hw_ocotp_ops2) /* 0x150 */ + mxs_reg_32(hw_ocotp_ops3) /* 0x160 */ + mxs_reg_32(hw_ocotp_un0) /* 0x170 */ + mxs_reg_32(hw_ocotp_un1) /* 0x180 */ + mxs_reg_32(hw_ocotp_un2) /* 0x190 */ + mxs_reg_32(hw_ocotp_rom0) /* 0x1a0 */ + mxs_reg_32(hw_ocotp_rom1) /* 0x1b0 */ + mxs_reg_32(hw_ocotp_rom2) /* 0x1c0 */ + mxs_reg_32(hw_ocotp_rom3) /* 0x1d0 */ + mxs_reg_32(hw_ocotp_rom4) /* 0x1e0 */ + mxs_reg_32(hw_ocotp_rom5) /* 0x1f0 */ + mxs_reg_32(hw_ocotp_rom6) /* 0x200 */ + mxs_reg_32(hw_ocotp_rom7) /* 0x210 */ + mxs_reg_32(hw_ocotp_srk0) /* 0x220 */ + mxs_reg_32(hw_ocotp_srk1) /* 0x230 */ + mxs_reg_32(hw_ocotp_srk2) /* 0x240 */ + mxs_reg_32(hw_ocotp_srk3) /* 0x250 */ + mxs_reg_32(hw_ocotp_srk4) /* 0x260 */ + mxs_reg_32(hw_ocotp_srk5) /* 0x270 */ + mxs_reg_32(hw_ocotp_srk6) /* 0x280 */ + mxs_reg_32(hw_ocotp_srk7) /* 0x290 */ + mxs_reg_32(hw_ocotp_version) /* 0x2a0 */ }; #endif diff --git a/arch/arm/include/asm/arch-mx28/regs-pinctrl.h b/arch/arm/include/asm/arch-mxs/regs-pinctrl.h index 80dcdf6619..d5841709c4 100644 --- a/arch/arm/include/asm/arch-mx28/regs-pinctrl.h +++ b/arch/arm/include/asm/arch-mxs/regs-pinctrl.h @@ -29,130 +29,130 @@ #include <asm/arch/regs-common.h> #ifndef __ASSEMBLY__ -struct mx28_pinctrl_regs { - mx28_reg_32(hw_pinctrl_ctrl) /* 0x0 */ +struct mxs_pinctrl_regs { + mxs_reg_32(hw_pinctrl_ctrl) /* 0x0 */ uint32_t reserved1[60]; - mx28_reg_32(hw_pinctrl_muxsel0) /* 0x100 */ - mx28_reg_32(hw_pinctrl_muxsel1) /* 0x110 */ - mx28_reg_32(hw_pinctrl_muxsel2) /* 0x120 */ - mx28_reg_32(hw_pinctrl_muxsel3) /* 0x130 */ - mx28_reg_32(hw_pinctrl_muxsel4) /* 0x140 */ - mx28_reg_32(hw_pinctrl_muxsel5) /* 0x150 */ - mx28_reg_32(hw_pinctrl_muxsel6) /* 0x160 */ - mx28_reg_32(hw_pinctrl_muxsel7) /* 0x170 */ - mx28_reg_32(hw_pinctrl_muxsel8) /* 0x180 */ - mx28_reg_32(hw_pinctrl_muxsel9) /* 0x190 */ - mx28_reg_32(hw_pinctrl_muxsel10) /* 0x1a0 */ - mx28_reg_32(hw_pinctrl_muxsel11) /* 0x1b0 */ - mx28_reg_32(hw_pinctrl_muxsel12) /* 0x1c0 */ - mx28_reg_32(hw_pinctrl_muxsel13) /* 0x1d0 */ + mxs_reg_32(hw_pinctrl_muxsel0) /* 0x100 */ + mxs_reg_32(hw_pinctrl_muxsel1) /* 0x110 */ + mxs_reg_32(hw_pinctrl_muxsel2) /* 0x120 */ + mxs_reg_32(hw_pinctrl_muxsel3) /* 0x130 */ + mxs_reg_32(hw_pinctrl_muxsel4) /* 0x140 */ + mxs_reg_32(hw_pinctrl_muxsel5) /* 0x150 */ + mxs_reg_32(hw_pinctrl_muxsel6) /* 0x160 */ + mxs_reg_32(hw_pinctrl_muxsel7) /* 0x170 */ + mxs_reg_32(hw_pinctrl_muxsel8) /* 0x180 */ + mxs_reg_32(hw_pinctrl_muxsel9) /* 0x190 */ + mxs_reg_32(hw_pinctrl_muxsel10) /* 0x1a0 */ + mxs_reg_32(hw_pinctrl_muxsel11) /* 0x1b0 */ + mxs_reg_32(hw_pinctrl_muxsel12) /* 0x1c0 */ + mxs_reg_32(hw_pinctrl_muxsel13) /* 0x1d0 */ uint32_t reserved2[72]; - mx28_reg_32(hw_pinctrl_drive0) /* 0x300 */ - mx28_reg_32(hw_pinctrl_drive1) /* 0x310 */ - mx28_reg_32(hw_pinctrl_drive2) /* 0x320 */ - mx28_reg_32(hw_pinctrl_drive3) /* 0x330 */ - mx28_reg_32(hw_pinctrl_drive4) /* 0x340 */ - mx28_reg_32(hw_pinctrl_drive5) /* 0x350 */ - mx28_reg_32(hw_pinctrl_drive6) /* 0x360 */ - mx28_reg_32(hw_pinctrl_drive7) /* 0x370 */ - mx28_reg_32(hw_pinctrl_drive8) /* 0x380 */ - mx28_reg_32(hw_pinctrl_drive9) /* 0x390 */ - mx28_reg_32(hw_pinctrl_drive10) /* 0x3a0 */ - mx28_reg_32(hw_pinctrl_drive11) /* 0x3b0 */ - mx28_reg_32(hw_pinctrl_drive12) /* 0x3c0 */ - mx28_reg_32(hw_pinctrl_drive13) /* 0x3d0 */ - mx28_reg_32(hw_pinctrl_drive14) /* 0x3e0 */ - mx28_reg_32(hw_pinctrl_drive15) /* 0x3f0 */ - mx28_reg_32(hw_pinctrl_drive16) /* 0x400 */ - mx28_reg_32(hw_pinctrl_drive17) /* 0x410 */ - mx28_reg_32(hw_pinctrl_drive18) /* 0x420 */ - mx28_reg_32(hw_pinctrl_drive19) /* 0x430 */ + mxs_reg_32(hw_pinctrl_drive0) /* 0x300 */ + mxs_reg_32(hw_pinctrl_drive1) /* 0x310 */ + mxs_reg_32(hw_pinctrl_drive2) /* 0x320 */ + mxs_reg_32(hw_pinctrl_drive3) /* 0x330 */ + mxs_reg_32(hw_pinctrl_drive4) /* 0x340 */ + mxs_reg_32(hw_pinctrl_drive5) /* 0x350 */ + mxs_reg_32(hw_pinctrl_drive6) /* 0x360 */ + mxs_reg_32(hw_pinctrl_drive7) /* 0x370 */ + mxs_reg_32(hw_pinctrl_drive8) /* 0x380 */ + mxs_reg_32(hw_pinctrl_drive9) /* 0x390 */ + mxs_reg_32(hw_pinctrl_drive10) /* 0x3a0 */ + mxs_reg_32(hw_pinctrl_drive11) /* 0x3b0 */ + mxs_reg_32(hw_pinctrl_drive12) /* 0x3c0 */ + mxs_reg_32(hw_pinctrl_drive13) /* 0x3d0 */ + mxs_reg_32(hw_pinctrl_drive14) /* 0x3e0 */ + mxs_reg_32(hw_pinctrl_drive15) /* 0x3f0 */ + mxs_reg_32(hw_pinctrl_drive16) /* 0x400 */ + mxs_reg_32(hw_pinctrl_drive17) /* 0x410 */ + mxs_reg_32(hw_pinctrl_drive18) /* 0x420 */ + mxs_reg_32(hw_pinctrl_drive19) /* 0x430 */ uint32_t reserved3[112]; - mx28_reg_32(hw_pinctrl_pull0) /* 0x600 */ - mx28_reg_32(hw_pinctrl_pull1) /* 0x610 */ - mx28_reg_32(hw_pinctrl_pull2) /* 0x620 */ - mx28_reg_32(hw_pinctrl_pull3) /* 0x630 */ - mx28_reg_32(hw_pinctrl_pull4) /* 0x640 */ - mx28_reg_32(hw_pinctrl_pull5) /* 0x650 */ - mx28_reg_32(hw_pinctrl_pull6) /* 0x660 */ + mxs_reg_32(hw_pinctrl_pull0) /* 0x600 */ + mxs_reg_32(hw_pinctrl_pull1) /* 0x610 */ + mxs_reg_32(hw_pinctrl_pull2) /* 0x620 */ + mxs_reg_32(hw_pinctrl_pull3) /* 0x630 */ + mxs_reg_32(hw_pinctrl_pull4) /* 0x640 */ + mxs_reg_32(hw_pinctrl_pull5) /* 0x650 */ + mxs_reg_32(hw_pinctrl_pull6) /* 0x660 */ uint32_t reserved4[36]; - mx28_reg_32(hw_pinctrl_dout0) /* 0x700 */ - mx28_reg_32(hw_pinctrl_dout1) /* 0x710 */ - mx28_reg_32(hw_pinctrl_dout2) /* 0x720 */ - mx28_reg_32(hw_pinctrl_dout3) /* 0x730 */ - mx28_reg_32(hw_pinctrl_dout4) /* 0x740 */ + mxs_reg_32(hw_pinctrl_dout0) /* 0x700 */ + mxs_reg_32(hw_pinctrl_dout1) /* 0x710 */ + mxs_reg_32(hw_pinctrl_dout2) /* 0x720 */ + mxs_reg_32(hw_pinctrl_dout3) /* 0x730 */ + mxs_reg_32(hw_pinctrl_dout4) /* 0x740 */ uint32_t reserved5[108]; - mx28_reg_32(hw_pinctrl_din0) /* 0x900 */ - mx28_reg_32(hw_pinctrl_din1) /* 0x910 */ - mx28_reg_32(hw_pinctrl_din2) /* 0x920 */ - mx28_reg_32(hw_pinctrl_din3) /* 0x930 */ - mx28_reg_32(hw_pinctrl_din4) /* 0x940 */ + mxs_reg_32(hw_pinctrl_din0) /* 0x900 */ + mxs_reg_32(hw_pinctrl_din1) /* 0x910 */ + mxs_reg_32(hw_pinctrl_din2) /* 0x920 */ + mxs_reg_32(hw_pinctrl_din3) /* 0x930 */ + mxs_reg_32(hw_pinctrl_din4) /* 0x940 */ uint32_t reserved6[108]; - mx28_reg_32(hw_pinctrl_doe0) /* 0xb00 */ - mx28_reg_32(hw_pinctrl_doe1) /* 0xb10 */ - mx28_reg_32(hw_pinctrl_doe2) /* 0xb20 */ - mx28_reg_32(hw_pinctrl_doe3) /* 0xb30 */ - mx28_reg_32(hw_pinctrl_doe4) /* 0xb40 */ + mxs_reg_32(hw_pinctrl_doe0) /* 0xb00 */ + mxs_reg_32(hw_pinctrl_doe1) /* 0xb10 */ + mxs_reg_32(hw_pinctrl_doe2) /* 0xb20 */ + mxs_reg_32(hw_pinctrl_doe3) /* 0xb30 */ + mxs_reg_32(hw_pinctrl_doe4) /* 0xb40 */ uint32_t reserved7[300]; - mx28_reg_32(hw_pinctrl_pin2irq0) /* 0x1000 */ - mx28_reg_32(hw_pinctrl_pin2irq1) /* 0x1010 */ - mx28_reg_32(hw_pinctrl_pin2irq2) /* 0x1020 */ - mx28_reg_32(hw_pinctrl_pin2irq3) /* 0x1030 */ - mx28_reg_32(hw_pinctrl_pin2irq4) /* 0x1040 */ + mxs_reg_32(hw_pinctrl_pin2irq0) /* 0x1000 */ + mxs_reg_32(hw_pinctrl_pin2irq1) /* 0x1010 */ + mxs_reg_32(hw_pinctrl_pin2irq2) /* 0x1020 */ + mxs_reg_32(hw_pinctrl_pin2irq3) /* 0x1030 */ + mxs_reg_32(hw_pinctrl_pin2irq4) /* 0x1040 */ uint32_t reserved8[44]; - mx28_reg_32(hw_pinctrl_irqen0) /* 0x1100 */ - mx28_reg_32(hw_pinctrl_irqen1) /* 0x1110 */ - mx28_reg_32(hw_pinctrl_irqen2) /* 0x1120 */ - mx28_reg_32(hw_pinctrl_irqen3) /* 0x1130 */ - mx28_reg_32(hw_pinctrl_irqen4) /* 0x1140 */ + mxs_reg_32(hw_pinctrl_irqen0) /* 0x1100 */ + mxs_reg_32(hw_pinctrl_irqen1) /* 0x1110 */ + mxs_reg_32(hw_pinctrl_irqen2) /* 0x1120 */ + mxs_reg_32(hw_pinctrl_irqen3) /* 0x1130 */ + mxs_reg_32(hw_pinctrl_irqen4) /* 0x1140 */ uint32_t reserved9[44]; - mx28_reg_32(hw_pinctrl_irqlevel0) /* 0x1200 */ - mx28_reg_32(hw_pinctrl_irqlevel1) /* 0x1210 */ - mx28_reg_32(hw_pinctrl_irqlevel2) /* 0x1220 */ - mx28_reg_32(hw_pinctrl_irqlevel3) /* 0x1230 */ - mx28_reg_32(hw_pinctrl_irqlevel4) /* 0x1240 */ + mxs_reg_32(hw_pinctrl_irqlevel0) /* 0x1200 */ + mxs_reg_32(hw_pinctrl_irqlevel1) /* 0x1210 */ + mxs_reg_32(hw_pinctrl_irqlevel2) /* 0x1220 */ + mxs_reg_32(hw_pinctrl_irqlevel3) /* 0x1230 */ + mxs_reg_32(hw_pinctrl_irqlevel4) /* 0x1240 */ uint32_t reserved10[44]; - mx28_reg_32(hw_pinctrl_irqpol0) /* 0x1300 */ - mx28_reg_32(hw_pinctrl_irqpol1) /* 0x1310 */ - mx28_reg_32(hw_pinctrl_irqpol2) /* 0x1320 */ - mx28_reg_32(hw_pinctrl_irqpol3) /* 0x1330 */ - mx28_reg_32(hw_pinctrl_irqpol4) /* 0x1340 */ + mxs_reg_32(hw_pinctrl_irqpol0) /* 0x1300 */ + mxs_reg_32(hw_pinctrl_irqpol1) /* 0x1310 */ + mxs_reg_32(hw_pinctrl_irqpol2) /* 0x1320 */ + mxs_reg_32(hw_pinctrl_irqpol3) /* 0x1330 */ + mxs_reg_32(hw_pinctrl_irqpol4) /* 0x1340 */ uint32_t reserved11[44]; - mx28_reg_32(hw_pinctrl_irqstat0) /* 0x1400 */ - mx28_reg_32(hw_pinctrl_irqstat1) /* 0x1410 */ - mx28_reg_32(hw_pinctrl_irqstat2) /* 0x1420 */ - mx28_reg_32(hw_pinctrl_irqstat3) /* 0x1430 */ - mx28_reg_32(hw_pinctrl_irqstat4) /* 0x1440 */ + mxs_reg_32(hw_pinctrl_irqstat0) /* 0x1400 */ + mxs_reg_32(hw_pinctrl_irqstat1) /* 0x1410 */ + mxs_reg_32(hw_pinctrl_irqstat2) /* 0x1420 */ + mxs_reg_32(hw_pinctrl_irqstat3) /* 0x1430 */ + mxs_reg_32(hw_pinctrl_irqstat4) /* 0x1440 */ uint32_t reserved12[380]; - mx28_reg_32(hw_pinctrl_emi_odt_ctrl) /* 0x1a40 */ + mxs_reg_32(hw_pinctrl_emi_odt_ctrl) /* 0x1a40 */ uint32_t reserved13[76]; - mx28_reg_32(hw_pinctrl_emi_ds_ctrl) /* 0x1b80 */ + mxs_reg_32(hw_pinctrl_emi_ds_ctrl) /* 0x1b80 */ }; #endif diff --git a/arch/arm/include/asm/arch-mx28/regs-power.h b/arch/arm/include/asm/arch-mxs/regs-power.h index 8eadc6d552..a46a372682 100644 --- a/arch/arm/include/asm/arch-mx28/regs-power.h +++ b/arch/arm/include/asm/arch-mxs/regs-power.h @@ -25,11 +25,11 @@ #include <asm/arch/regs-common.h> #ifndef __ASSEMBLY__ -struct mx28_power_regs { - mx28_reg_32(hw_power_ctrl) - mx28_reg_32(hw_power_5vctrl) - mx28_reg_32(hw_power_minpwr) - mx28_reg_32(hw_power_charge) +struct mxs_power_regs { + mxs_reg_32(hw_power_ctrl) + mxs_reg_32(hw_power_5vctrl) + mxs_reg_32(hw_power_minpwr) + mxs_reg_32(hw_power_charge) uint32_t hw_power_vdddctrl; uint32_t reserved_vddd[3]; uint32_t hw_power_vddactrl; @@ -44,23 +44,23 @@ struct mx28_power_regs { uint32_t reserved_misc[3]; uint32_t hw_power_dclimits; uint32_t reserved_dclimits[3]; - mx28_reg_32(hw_power_loopctrl) + mxs_reg_32(hw_power_loopctrl) uint32_t hw_power_sts; uint32_t reserved_sts[3]; - mx28_reg_32(hw_power_speed) + mxs_reg_32(hw_power_speed) uint32_t hw_power_battmonitor; uint32_t reserved_battmonitor[3]; uint32_t reserved[4]; - mx28_reg_32(hw_power_reset) - mx28_reg_32(hw_power_debug) - mx28_reg_32(hw_power_thermal) - mx28_reg_32(hw_power_usb1ctrl) - mx28_reg_32(hw_power_special) - mx28_reg_32(hw_power_version) - mx28_reg_32(hw_power_anaclkctrl) - mx28_reg_32(hw_power_refctrl) + mxs_reg_32(hw_power_reset) + mxs_reg_32(hw_power_debug) + mxs_reg_32(hw_power_thermal) + mxs_reg_32(hw_power_usb1ctrl) + mxs_reg_32(hw_power_special) + mxs_reg_32(hw_power_version) + mxs_reg_32(hw_power_anaclkctrl) + mxs_reg_32(hw_power_refctrl) }; #endif diff --git a/arch/arm/include/asm/arch-mx28/regs-rtc.h b/arch/arm/include/asm/arch-mxs/regs-rtc.h index e605a03953..6b2dd332e3 100644 --- a/arch/arm/include/asm/arch-mx28/regs-rtc.h +++ b/arch/arm/include/asm/arch-mxs/regs-rtc.h @@ -26,21 +26,21 @@ #include <asm/arch/regs-common.h> #ifndef __ASSEMBLY__ -struct mx28_rtc_regs { - mx28_reg_32(hw_rtc_ctrl) - mx28_reg_32(hw_rtc_stat) - mx28_reg_32(hw_rtc_milliseconds) - mx28_reg_32(hw_rtc_seconds) - mx28_reg_32(hw_rtc_rtc_alarm) - mx28_reg_32(hw_rtc_watchdog) - mx28_reg_32(hw_rtc_persistent0) - mx28_reg_32(hw_rtc_persistent1) - mx28_reg_32(hw_rtc_persistent2) - mx28_reg_32(hw_rtc_persistent3) - mx28_reg_32(hw_rtc_persistent4) - mx28_reg_32(hw_rtc_persistent5) - mx28_reg_32(hw_rtc_debug) - mx28_reg_32(hw_rtc_version) +struct mxs_rtc_regs { + mxs_reg_32(hw_rtc_ctrl) + mxs_reg_32(hw_rtc_stat) + mxs_reg_32(hw_rtc_milliseconds) + mxs_reg_32(hw_rtc_seconds) + mxs_reg_32(hw_rtc_rtc_alarm) + mxs_reg_32(hw_rtc_watchdog) + mxs_reg_32(hw_rtc_persistent0) + mxs_reg_32(hw_rtc_persistent1) + mxs_reg_32(hw_rtc_persistent2) + mxs_reg_32(hw_rtc_persistent3) + mxs_reg_32(hw_rtc_persistent4) + mxs_reg_32(hw_rtc_persistent5) + mxs_reg_32(hw_rtc_debug) + mxs_reg_32(hw_rtc_version) }; #endif diff --git a/arch/arm/include/asm/arch-mx28/regs-ssp.h b/arch/arm/include/asm/arch-mxs/regs-ssp.h index be71d48947..cf52a28c3b 100644 --- a/arch/arm/include/asm/arch-mx28/regs-ssp.h +++ b/arch/arm/include/asm/arch-mxs/regs-ssp.h @@ -28,27 +28,27 @@ #include <asm/arch/regs-common.h> #ifndef __ASSEMBLY__ -struct mx28_ssp_regs { - mx28_reg_32(hw_ssp_ctrl0) - mx28_reg_32(hw_ssp_cmd0) - mx28_reg_32(hw_ssp_cmd1) - mx28_reg_32(hw_ssp_xfer_size) - mx28_reg_32(hw_ssp_block_size) - mx28_reg_32(hw_ssp_compref) - mx28_reg_32(hw_ssp_compmask) - mx28_reg_32(hw_ssp_timing) - mx28_reg_32(hw_ssp_ctrl1) - mx28_reg_32(hw_ssp_data) - mx28_reg_32(hw_ssp_sdresp0) - mx28_reg_32(hw_ssp_sdresp1) - mx28_reg_32(hw_ssp_sdresp2) - mx28_reg_32(hw_ssp_sdresp3) - mx28_reg_32(hw_ssp_ddr_ctrl) - mx28_reg_32(hw_ssp_dll_ctrl) - mx28_reg_32(hw_ssp_status) - mx28_reg_32(hw_ssp_dll_sts) - mx28_reg_32(hw_ssp_debug) - mx28_reg_32(hw_ssp_version) +struct mxs_ssp_regs { + mxs_reg_32(hw_ssp_ctrl0) + mxs_reg_32(hw_ssp_cmd0) + mxs_reg_32(hw_ssp_cmd1) + mxs_reg_32(hw_ssp_xfer_size) + mxs_reg_32(hw_ssp_block_size) + mxs_reg_32(hw_ssp_compref) + mxs_reg_32(hw_ssp_compmask) + mxs_reg_32(hw_ssp_timing) + mxs_reg_32(hw_ssp_ctrl1) + mxs_reg_32(hw_ssp_data) + mxs_reg_32(hw_ssp_sdresp0) + mxs_reg_32(hw_ssp_sdresp1) + mxs_reg_32(hw_ssp_sdresp2) + mxs_reg_32(hw_ssp_sdresp3) + mxs_reg_32(hw_ssp_ddr_ctrl) + mxs_reg_32(hw_ssp_dll_ctrl) + mxs_reg_32(hw_ssp_status) + mxs_reg_32(hw_ssp_dll_sts) + mxs_reg_32(hw_ssp_debug) + mxs_reg_32(hw_ssp_version) }; #endif diff --git a/arch/arm/include/asm/arch-mx28/regs-timrot.h b/arch/arm/include/asm/arch-mxs/regs-timrot.h index 3e8dfe782f..529a3bcdd1 100644 --- a/arch/arm/include/asm/arch-mx28/regs-timrot.h +++ b/arch/arm/include/asm/arch-mxs/regs-timrot.h @@ -28,26 +28,26 @@ #include <asm/arch/regs-common.h> #ifndef __ASSEMBLY__ -struct mx28_timrot_regs { - mx28_reg_32(hw_timrot_rotctrl) - mx28_reg_32(hw_timrot_rotcount) - mx28_reg_32(hw_timrot_timctrl0) - mx28_reg_32(hw_timrot_running_count0) - mx28_reg_32(hw_timrot_fixed_count0) - mx28_reg_32(hw_timrot_match_count0) - mx28_reg_32(hw_timrot_timctrl1) - mx28_reg_32(hw_timrot_running_count1) - mx28_reg_32(hw_timrot_fixed_count1) - mx28_reg_32(hw_timrot_match_count1) - mx28_reg_32(hw_timrot_timctrl2) - mx28_reg_32(hw_timrot_running_count2) - mx28_reg_32(hw_timrot_fixed_count2) - mx28_reg_32(hw_timrot_match_count2) - mx28_reg_32(hw_timrot_timctrl3) - mx28_reg_32(hw_timrot_running_count3) - mx28_reg_32(hw_timrot_fixed_count3) - mx28_reg_32(hw_timrot_match_count3) - mx28_reg_32(hw_timrot_version) +struct mxs_timrot_regs { + mxs_reg_32(hw_timrot_rotctrl) + mxs_reg_32(hw_timrot_rotcount) + mxs_reg_32(hw_timrot_timctrl0) + mxs_reg_32(hw_timrot_running_count0) + mxs_reg_32(hw_timrot_fixed_count0) + mxs_reg_32(hw_timrot_match_count0) + mxs_reg_32(hw_timrot_timctrl1) + mxs_reg_32(hw_timrot_running_count1) + mxs_reg_32(hw_timrot_fixed_count1) + mxs_reg_32(hw_timrot_match_count1) + mxs_reg_32(hw_timrot_timctrl2) + mxs_reg_32(hw_timrot_running_count2) + mxs_reg_32(hw_timrot_fixed_count2) + mxs_reg_32(hw_timrot_match_count2) + mxs_reg_32(hw_timrot_timctrl3) + mxs_reg_32(hw_timrot_running_count3) + mxs_reg_32(hw_timrot_fixed_count3) + mxs_reg_32(hw_timrot_match_count3) + mxs_reg_32(hw_timrot_version) }; #endif diff --git a/arch/arm/include/asm/arch-mx28/regs-usb.h b/arch/arm/include/asm/arch-mxs/regs-usb.h index ea61de80d8..d8bcd77d4d 100644 --- a/arch/arm/include/asm/arch-mx28/regs-usb.h +++ b/arch/arm/include/asm/arch-mxs/regs-usb.h @@ -23,7 +23,7 @@ #ifndef __REGS_USB_H__ #define __REGS_USB_H__ -struct mx28_usb_regs { +struct mxs_usb_regs { uint32_t hw_usbctrl_id; /* 0x000 */ uint32_t hw_usbctrl_hwgeneral; /* 0x004 */ uint32_t hw_usbctrl_hwhost; /* 0x008 */ diff --git a/arch/arm/include/asm/arch-mx28/regs-usbphy.h b/arch/arm/include/asm/arch-mxs/regs-usbphy.h index 0291d815c6..288e8fa6d0 100644 --- a/arch/arm/include/asm/arch-mx28/regs-usbphy.h +++ b/arch/arm/include/asm/arch-mxs/regs-usbphy.h @@ -23,17 +23,17 @@ #ifndef __REGS_USBPHY_H__ #define __REGS_USBPHY_H__ -struct mx28_usbphy_regs { - mx28_reg_32(hw_usbphy_pwd) - mx28_reg_32(hw_usbphy_tx) - mx28_reg_32(hw_usbphy_rx) - mx28_reg_32(hw_usbphy_ctrl) - mx28_reg_32(hw_usbphy_status) - mx28_reg_32(hw_usbphy_debug) - mx28_reg_32(hw_usbphy_debug0_status) - mx28_reg_32(hw_usbphy_debug1) - mx28_reg_32(hw_usbphy_version) - mx28_reg_32(hw_usbphy_ip) +struct mxs_usbphy_regs { + mxs_reg_32(hw_usbphy_pwd) + mxs_reg_32(hw_usbphy_tx) + mxs_reg_32(hw_usbphy_rx) + mxs_reg_32(hw_usbphy_ctrl) + mxs_reg_32(hw_usbphy_status) + mxs_reg_32(hw_usbphy_debug) + mxs_reg_32(hw_usbphy_debug0_status) + mxs_reg_32(hw_usbphy_debug1) + mxs_reg_32(hw_usbphy_version) + mxs_reg_32(hw_usbphy_ip) }; #define USBPHY_PWD_RXPWDRX (1 << 20) diff --git a/arch/arm/include/asm/arch-mx28/sys_proto.h b/arch/arm/include/asm/arch-mxs/sys_proto.h index e701c6409e..9bddc12d4d 100644 --- a/arch/arm/include/asm/arch-mx28/sys_proto.h +++ b/arch/arm/include/asm/arch-mxs/sys_proto.h @@ -1,5 +1,5 @@ /* - * Freescale i.MX28 MX28 specific functions + * Freescale i.MX23/i.MX28 specific functions * * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> * on behalf of DENX Software Engineering GmbH @@ -20,32 +20,32 @@ * */ -#ifndef __MX28_H__ -#define __MX28_H__ +#ifndef __SYS_PROTO_H__ +#define __SYS_PROTO_H__ -int mx28_reset_block(struct mx28_register_32 *reg); -int mx28_wait_mask_set(struct mx28_register_32 *reg, +int mxs_reset_block(struct mxs_register_32 *reg); +int mxs_wait_mask_set(struct mxs_register_32 *reg, uint32_t mask, - int timeout); -int mx28_wait_mask_clr(struct mx28_register_32 *reg, + unsigned int timeout); +int mxs_wait_mask_clr(struct mxs_register_32 *reg, uint32_t mask, - int timeout); + unsigned int timeout); int mxsmmc_initialize(bd_t *bis, int id, int (*wp)(int)); #ifdef CONFIG_SPL_BUILD #include <asm/arch/iomux-mx28.h> -void mx28_common_spl_init(const iomux_cfg_t *iomux_setup, +void mxs_common_spl_init(const iomux_cfg_t *iomux_setup, const unsigned int iomux_size); #endif -struct mx28_pair { +struct mxs_pair { uint8_t boot_pads; uint8_t boot_mask; const char *mode; }; -static const struct mx28_pair mx28_boot_modes[] = { +static const struct mxs_pair mxs_boot_modes[] = { { 0x00, 0x0f, "USB #0" }, { 0x01, 0x1f, "I2C #0, master, 3V3" }, { 0x11, 0x1f, "I2C #0, master, 1V8" }, @@ -64,11 +64,11 @@ static const struct mx28_pair mx28_boot_modes[] = { { 0x00, 0x00, "Reserved/Unknown/Wrong" }, }; -struct mx28_spl_data { +struct mxs_spl_data { uint8_t boot_mode_idx; uint32_t mem_dram_size; }; -int mx28_dram_init(void); +int mxs_dram_init(void); -#endif /* __MX28_H__ */ +#endif /* __SYS_PROTO_H__ */ diff --git a/arch/arm/include/asm/arch-omap3/mem.h b/arch/arm/include/asm/arch-omap3/mem.h index 9f6992a121..12dcf4ed1e 100644 --- a/arch/arm/include/asm/arch-omap3/mem.h +++ b/arch/arm/include/asm/arch-omap3/mem.h @@ -294,6 +294,35 @@ enum { #define NUMONYX_RASWIDTH_165 15 #define NUMONYX_V_MCFG_165(size) MCFG((size), NUMONYX_RASWIDTH_165) +/* NUMONYX part of IGEP v2 (200MHz optimized) 5 ns */ +#define NUMONYX_TDAL_200 6 /* Twr/Tck + Trp/tck */ + /* 15/5 + 15/5 = 3 + 3 -> 6 */ +#define NUMONYX_TDPL_200 3 /* 15/5 = 3 -> 3 (Twr) */ +#define NUMONYX_TRRD_200 2 /* 10/5 = 2 */ +#define NUMONYX_TRCD_200 4 /* 16.2/5 = 3.24 -> 4 */ +#define NUMONYX_TRP_200 3 /* 15/5 = 3 */ +#define NUMONYX_TRAS_200 8 /* 40/5 = 8 */ +#define NUMONYX_TRC_200 11 /* 55/5 = 11 */ +#define NUMONYX_TRFC_200 28 /* 140/5 = 28 */ + +#define NUMONYX_V_ACTIMA_200 \ + ACTIM_CTRLA(NUMONYX_TRFC_200, NUMONYX_TRC_200, \ + NUMONYX_TRAS_200, NUMONYX_TRP_200, \ + NUMONYX_TRCD_200, NUMONYX_TRRD_200, \ + NUMONYX_TDPL_200, NUMONYX_TDAL_200) + +#define NUMONYX_TWTR_200 2 +#define NUMONYX_TCKE_200 2 +#define NUMONYX_TXP_200 3 +#define NUMONYX_XSR_200 40 + +#define NUMONYX_V_ACTIMB_200 \ + ACTIM_CTRLB(NUMONYX_TWTR_200, NUMONYX_TCKE_200, \ + NUMONYX_TXP_200, NUMONYX_XSR_200) + +#define NUMONYX_RASWIDTH_200 15 +#define NUMONYX_V_MCFG_200(size) MCFG((size), NUMONYX_RASWIDTH_200) + /* * GPMC settings - * Definitions is as per the following format diff --git a/arch/arm/include/asm/arch-omap4/omap.h b/arch/arm/include/asm/arch-omap4/omap.h index 03bd923145..d4b5076108 100644 --- a/arch/arm/include/asm/arch-omap4/omap.h +++ b/arch/arm/include/asm/arch-omap4/omap.h @@ -172,7 +172,6 @@ struct control_lpddr2io_regs { /* base address for indirect vectors (internal boot mode) */ #define SRAM_ROM_VECT_BASE 0x4030D000 /* Temporary SRAM stack used while low level init is done */ -#define LOW_LEVEL_SRAM_STACK NON_SECURE_SRAM_END #define SRAM_SCRATCH_SPACE_ADDR NON_SECURE_SRAM_START /* SRAM scratch space entries */ #define OMAP4_SRAM_SCRATCH_OMAP4_REV SRAM_SCRATCH_SPACE_ADDR diff --git a/arch/arm/include/asm/arch-omap5/omap.h b/arch/arm/include/asm/arch-omap5/omap.h index 7f05cb5b4a..9dce49ac4b 100644 --- a/arch/arm/include/asm/arch-omap5/omap.h +++ b/arch/arm/include/asm/arch-omap5/omap.h @@ -262,8 +262,6 @@ struct omap_sys_ctrl_regs { #define NON_SECURE_SRAM_END 0x40320000 /* Not inclusive */ /* base address for indirect vectors (internal boot mode) */ #define SRAM_ROM_VECT_BASE 0x4031F000 -/* Temporary SRAM stack used while low level init is done */ -#define LOW_LEVEL_SRAM_STACK NON_SECURE_SRAM_END #define SRAM_SCRATCH_SPACE_ADDR NON_SECURE_SRAM_START /* diff --git a/arch/arm/include/asm/arch-pxa/regs-usb.h b/arch/arm/include/asm/arch-pxa/regs-usb.h new file mode 100644 index 0000000000..dda7954994 --- /dev/null +++ b/arch/arm/include/asm/arch-pxa/regs-usb.h @@ -0,0 +1,159 @@ +/* + * PXA25x UDC definitions + * + * Copyright (C) 2012 Łukasz Dałek <luk0104@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __REGS_USB_H__ +#define __REGS_USB_H__ + +struct pxa25x_udc_regs { + /* UDC Control Register */ + uint32_t udccr; /* 0x000 */ + uint32_t reserved1; + + /* UDC Control Function Register */ + uint32_t udccfr; /* 0x008 */ + uint32_t reserved2; + + /* UDC Endpoint Control/Status Registers */ + uint32_t udccs[16]; /* 0x010 - 0x04c */ + + /* UDC Interrupt Control/Status Registers */ + uint32_t uicr0; /* 0x050 */ + uint32_t uicr1; /* 0x054 */ + uint32_t usir0; /* 0x058 */ + uint32_t usir1; /* 0x05c */ + + /* UDC Frame Number/Byte Count Registers */ + uint32_t ufnrh; /* 0x060 */ + uint32_t ufnrl; /* 0x064 */ + uint32_t ubcr2; /* 0x068 */ + uint32_t ubcr4; /* 0x06c */ + uint32_t ubcr7; /* 0x070 */ + uint32_t ubcr9; /* 0x074 */ + uint32_t ubcr12; /* 0x078 */ + uint32_t ubcr14; /* 0x07c */ + + /* UDC Endpoint Data Registers */ + uint32_t uddr0; /* 0x080 */ + uint32_t reserved3[7]; + uint32_t uddr5; /* 0x0a0 */ + uint32_t reserved4[7]; + uint32_t uddr10; /* 0x0c0 */ + uint32_t reserved5[7]; + uint32_t uddr15; /* 0x0e0 */ + uint32_t reserved6[7]; + uint32_t uddr1; /* 0x100 */ + uint32_t reserved7[31]; + uint32_t uddr2; /* 0x180 */ + uint32_t reserved8[31]; + uint32_t uddr3; /* 0x200 */ + uint32_t reserved9[127]; + uint32_t uddr4; /* 0x400 */ + uint32_t reserved10[127]; + uint32_t uddr6; /* 0x600 */ + uint32_t reserved11[31]; + uint32_t uddr7; /* 0x680 */ + uint32_t reserved12[31]; + uint32_t uddr8; /* 0x700 */ + uint32_t reserved13[127]; + uint32_t uddr9; /* 0x900 */ + uint32_t reserved14[127]; + uint32_t uddr11; /* 0xb00 */ + uint32_t reserved15[31]; + uint32_t uddr12; /* 0xb80 */ + uint32_t reserved16[31]; + uint32_t uddr13; /* 0xc00 */ + uint32_t reserved17[127]; + uint32_t uddr14; /* 0xe00 */ + +}; + +#define PXA25X_UDC_BASE 0x40600000 + +#define UDCCR_UDE (1 << 0) +#define UDCCR_UDA (1 << 1) +#define UDCCR_RSM (1 << 2) +#define UDCCR_RESIR (1 << 3) +#define UDCCR_SUSIR (1 << 4) +#define UDCCR_SRM (1 << 5) +#define UDCCR_RSTIR (1 << 6) +#define UDCCR_REM (1 << 7) + +/* Bulk IN endpoint 1/6/11 */ +#define UDCCS_BI_TSP (1 << 7) +#define UDCCS_BI_FST (1 << 5) +#define UDCCS_BI_SST (1 << 4) +#define UDCCS_BI_TUR (1 << 3) +#define UDCCS_BI_FTF (1 << 2) +#define UDCCS_BI_TPC (1 << 1) +#define UDCCS_BI_TFS (1 << 0) + +/* Bulk OUT endpoint 2/7/12 */ +#define UDCCS_BO_RSP (1 << 7) +#define UDCCS_BO_RNE (1 << 6) +#define UDCCS_BO_FST (1 << 5) +#define UDCCS_BO_SST (1 << 4) +#define UDCCS_BO_DME (1 << 3) +#define UDCCS_BO_RPC (1 << 1) +#define UDCCS_BO_RFS (1 << 0) + +/* Isochronous OUT endpoint 4/9/14 */ +#define UDCCS_IO_RSP (1 << 7) +#define UDCCS_IO_RNE (1 << 6) +#define UDCCS_IO_DME (1 << 3) +#define UDCCS_IO_ROF (1 << 2) +#define UDCCS_IO_RPC (1 << 1) +#define UDCCS_IO_RFS (1 << 0) + +/* Control endpoint 0 */ +#define UDCCS0_OPR (1 << 0) +#define UDCCS0_IPR (1 << 1) +#define UDCCS0_FTF (1 << 2) +#define UDCCS0_DRWF (1 << 3) +#define UDCCS0_SST (1 << 4) +#define UDCCS0_FST (1 << 5) +#define UDCCS0_RNE (1 << 6) +#define UDCCS0_SA (1 << 7) + +#define UICR0_IM0 (1 << 0) + +#define USIR0_IR0 (1 << 0) +#define USIR0_IR1 (1 << 1) +#define USIR0_IR2 (1 << 2) +#define USIR0_IR3 (1 << 3) +#define USIR0_IR4 (1 << 4) +#define USIR0_IR5 (1 << 5) +#define USIR0_IR6 (1 << 6) +#define USIR0_IR7 (1 << 7) + +#define UDCCFR_AREN (1 << 7) /* ACK response enable (now) */ +#define UDCCFR_ACM (1 << 2) /* ACK control mode (wait for AREN) */ +/* + * Intel(R) PXA255 Processor Specification, September 2003 (page 31) + * define new "must be one" bits in UDCCFR (see Table 12-13.) + */ +#define UDCCFR_MB1 (0xff & ~(UDCCFR_AREN | UDCCFR_ACM)) + +#define UFNRH_SIR (1 << 7) /* SOF interrupt request */ +#define UFNRH_SIM (1 << 6) /* SOF interrupt mask */ +#define UFNRH_IPE14 (1 << 5) /* ISO packet error, ep14 */ +#define UFNRH_IPE9 (1 << 4) /* ISO packet error, ep9 */ +#define UFNRH_IPE4 (1 << 3) /* ISO packet error, ep4 */ + +#endif /* __REGS_USB_H__ */ diff --git a/arch/arm/include/asm/arch-tegra2/ap20.h b/arch/arm/include/asm/arch-tegra20/ap20.h index d222c44233..c84d22f97b 100644 --- a/arch/arm/include/asm/arch-tegra2/ap20.h +++ b/arch/arm/include/asm/arch-tegra20/ap20.h @@ -95,8 +95,8 @@ #define HALT_COP_EVENT_IRQ_1 (1 << 11) #define HALT_COP_EVENT_FIQ_1 (1 << 9) -/* Start up the tegra2 SOC */ -void tegra2_start(void); +/* Start up the tegra20 SOC */ +void tegra20_start(void); /* This is the main entry into U-Boot, used by the Cortex-A9 */ extern void _start(void); diff --git a/arch/arm/include/asm/arch-tegra2/apb_misc.h b/arch/arm/include/asm/arch-tegra20/apb_misc.h index eb69d18d01..eb69d18d01 100644 --- a/arch/arm/include/asm/arch-tegra2/apb_misc.h +++ b/arch/arm/include/asm/arch-tegra20/apb_misc.h diff --git a/arch/arm/include/asm/arch-tegra2/board.h b/arch/arm/include/asm/arch-tegra20/board.h index a90d36c708..a90d36c708 100644 --- a/arch/arm/include/asm/arch-tegra2/board.h +++ b/arch/arm/include/asm/arch-tegra20/board.h diff --git a/arch/arm/include/asm/arch-tegra2/clk_rst.h b/arch/arm/include/asm/arch-tegra20/clk_rst.h index 8c3be91514..8c3be91514 100644 --- a/arch/arm/include/asm/arch-tegra2/clk_rst.h +++ b/arch/arm/include/asm/arch-tegra20/clk_rst.h diff --git a/arch/arm/include/asm/arch-tegra2/clock.h b/arch/arm/include/asm/arch-tegra20/clock.h index ff83bbf293..ff83bbf293 100644 --- a/arch/arm/include/asm/arch-tegra2/clock.h +++ b/arch/arm/include/asm/arch-tegra20/clock.h diff --git a/arch/arm/include/asm/arch-tegra2/emc.h b/arch/arm/include/asm/arch-tegra20/emc.h index deb3d36ed2..deb3d36ed2 100644 --- a/arch/arm/include/asm/arch-tegra2/emc.h +++ b/arch/arm/include/asm/arch-tegra20/emc.h diff --git a/arch/arm/include/asm/arch-tegra2/flow.h b/arch/arm/include/asm/arch-tegra20/flow.h index cce6cbf7d0..cce6cbf7d0 100644 --- a/arch/arm/include/asm/arch-tegra2/flow.h +++ b/arch/arm/include/asm/arch-tegra20/flow.h diff --git a/arch/arm/include/asm/arch-tegra2/funcmux.h b/arch/arm/include/asm/arch-tegra20/funcmux.h index dcd512f084..258f7b641a 100644 --- a/arch/arm/include/asm/arch-tegra2/funcmux.h +++ b/arch/arm/include/asm/arch-tegra20/funcmux.h @@ -19,7 +19,7 @@ * MA 02111-1307 USA */ -/* Tegra2 high-level function multiplexing */ +/* Tegra20 high-level function multiplexing */ #ifndef __FUNCMUX_H #define __FUNCMUX_H diff --git a/arch/arm/include/asm/arch-tegra2/fuse.h b/arch/arm/include/asm/arch-tegra20/fuse.h index b7e3808a4f..b7e3808a4f 100644 --- a/arch/arm/include/asm/arch-tegra2/fuse.h +++ b/arch/arm/include/asm/arch-tegra20/fuse.h diff --git a/arch/arm/include/asm/arch-tegra2/gp_padctrl.h b/arch/arm/include/asm/arch-tegra20/gp_padctrl.h index 1755ab2eaa..865af5bc79 100644 --- a/arch/arm/include/asm/arch-tegra2/gp_padctrl.h +++ b/arch/arm/include/asm/arch-tegra20/gp_padctrl.h @@ -68,6 +68,6 @@ struct apb_misc_gp_ctlr { #define HIDREV_MAJORPREV_MASK (0xf << HIDREV_MAJORPREV_SHIFT) /* CHIPID field returned from APB_MISC_GP_HIDREV register */ -#define CHIPID_TEGRA2 0x20 +#define CHIPID_TEGRA20 0x20 #endif diff --git a/arch/arm/include/asm/arch-tegra2/gpio.h b/arch/arm/include/asm/arch-tegra20/gpio.h index 40ddb02565..06be4c28be 100644 --- a/arch/arm/include/asm/arch-tegra2/gpio.h +++ b/arch/arm/include/asm/arch-tegra20/gpio.h @@ -281,7 +281,7 @@ enum gpio_pin { }; /* - * Tegra2-specific GPIO API + * Tegra20-specific GPIO API */ void gpio_info(void); diff --git a/arch/arm/include/asm/arch-tegra20/hardware.h b/arch/arm/include/asm/arch-tegra20/hardware.h new file mode 100644 index 0000000000..8c47578338 --- /dev/null +++ b/arch/arm/include/asm/arch-tegra20/hardware.h @@ -0,0 +1,29 @@ +/* +* (C) Copyright 2010-2011 +* NVIDIA Corporation <www.nvidia.com> +* +* See file CREDITS for list of people who contributed to this +* project. +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License as +* published by the Free Software Foundation; either version 2 of +* the License, or (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 59 Temple Place, Suite 330, Boston, +* MA 02111-1307 USA +*/ + +#ifndef __TEGRA2_HW_H +#define __TEGRA2_HW_H + +/* include tegra specific hardware definitions */ + +#endif /* __TEGRA2_HW_H */ diff --git a/arch/arm/include/asm/arch-tegra2/mmc.h b/arch/arm/include/asm/arch-tegra20/mmc.h index c1f12dbe49..916a353a97 100644 --- a/arch/arm/include/asm/arch-tegra2/mmc.h +++ b/arch/arm/include/asm/arch-tegra20/mmc.h @@ -19,9 +19,9 @@ * MA 02111-1307 USA */ -#ifndef _TEGRA2_MMC_H_ -#define _TEGRA2_MMC_H_ +#ifndef _TEGRA20_MMC_H_ +#define _TEGRA20_MMC_H_ -int tegra2_mmc_init(int dev_index, int bus_width, int pwr_gpio, int cd_gpio); +int tegra20_mmc_init(int dev_index, int bus_width, int pwr_gpio, int cd_gpio); -#endif /* TEGRA2_MMC_H_ */ +#endif /* TEGRA20_MMC_H_ */ diff --git a/arch/arm/include/asm/arch-tegra2/pinmux.h b/arch/arm/include/asm/arch-tegra20/pinmux.h index 03fa7ca643..03fa7ca643 100644 --- a/arch/arm/include/asm/arch-tegra2/pinmux.h +++ b/arch/arm/include/asm/arch-tegra20/pinmux.h diff --git a/arch/arm/include/asm/arch-tegra2/pmc.h b/arch/arm/include/asm/arch-tegra20/pmc.h index b1d47cd2e3..b1d47cd2e3 100644 --- a/arch/arm/include/asm/arch-tegra2/pmc.h +++ b/arch/arm/include/asm/arch-tegra20/pmc.h diff --git a/arch/arm/include/asm/arch-tegra2/pmu.h b/arch/arm/include/asm/arch-tegra20/pmu.h index 390815fc24..390815fc24 100644 --- a/arch/arm/include/asm/arch-tegra2/pmu.h +++ b/arch/arm/include/asm/arch-tegra20/pmu.h diff --git a/arch/arm/include/asm/arch-tegra2/scu.h b/arch/arm/include/asm/arch-tegra20/scu.h index 787ded0fe0..787ded0fe0 100644 --- a/arch/arm/include/asm/arch-tegra2/scu.h +++ b/arch/arm/include/asm/arch-tegra20/scu.h diff --git a/arch/arm/include/asm/arch-tegra2/sdram_param.h b/arch/arm/include/asm/arch-tegra20/sdram_param.h index 6c427d0841..6c427d0841 100644 --- a/arch/arm/include/asm/arch-tegra2/sdram_param.h +++ b/arch/arm/include/asm/arch-tegra20/sdram_param.h diff --git a/arch/arm/include/asm/arch-tegra2/sys_proto.h b/arch/arm/include/asm/arch-tegra20/sys_proto.h index c11534e585..643d5424b8 100644 --- a/arch/arm/include/asm/arch-tegra2/sys_proto.h +++ b/arch/arm/include/asm/arch-tegra20/sys_proto.h @@ -24,12 +24,12 @@ #ifndef _SYS_PROTO_H_ #define _SYS_PROTO_H_ -struct tegra2_sysinfo { +struct tegra20_sysinfo { char *board_string; }; void invalidate_dcache(void); -extern const struct tegra2_sysinfo sysinfo; +extern const struct tegra20_sysinfo sysinfo; #endif diff --git a/arch/arm/include/asm/arch-tegra2/tegra2.h b/arch/arm/include/asm/arch-tegra20/tegra20.h index 13d68c017c..6750754bae 100644 --- a/arch/arm/include/asm/arch-tegra2/tegra2.h +++ b/arch/arm/include/asm/arch-tegra20/tegra20.h @@ -21,8 +21,8 @@ * MA 02111-1307 USA */ -#ifndef _TEGRA2_H_ -#define _TEGRA2_H_ +#ifndef _TEGRA20_H_ +#define _TEGRA20_H_ #define NV_PA_SDRAM_BASE 0x00000000 #define NV_PA_ARM_PERIPHBASE 0x50040000 @@ -33,21 +33,21 @@ #define NV_PA_GPIO_BASE 0x6000D000 #define NV_PA_EVP_BASE 0x6000F000 #define NV_PA_APB_MISC_BASE 0x70000000 -#define TEGRA2_APB_MISC_GP_BASE (NV_PA_APB_MISC_BASE + 0x0800) +#define TEGRA20_APB_MISC_GP_BASE (NV_PA_APB_MISC_BASE + 0x0800) #define NV_PA_APB_UARTA_BASE (NV_PA_APB_MISC_BASE + 0x6000) #define NV_PA_APB_UARTB_BASE (NV_PA_APB_MISC_BASE + 0x6040) #define NV_PA_APB_UARTC_BASE (NV_PA_APB_MISC_BASE + 0x6200) #define NV_PA_APB_UARTD_BASE (NV_PA_APB_MISC_BASE + 0x6300) #define NV_PA_APB_UARTE_BASE (NV_PA_APB_MISC_BASE + 0x6400) -#define TEGRA2_SPI_BASE (NV_PA_APB_MISC_BASE + 0xC380) -#define TEGRA2_PMC_BASE (NV_PA_APB_MISC_BASE + 0xE400) -#define TEGRA2_FUSE_BASE (NV_PA_APB_MISC_BASE + 0xF800) +#define TEGRA20_SPI_BASE (NV_PA_APB_MISC_BASE + 0xC380) +#define TEGRA20_PMC_BASE (NV_PA_APB_MISC_BASE + 0xE400) +#define TEGRA20_FUSE_BASE (NV_PA_APB_MISC_BASE + 0xF800) #define NV_PA_CSITE_BASE 0x70040000 #define TEGRA_USB1_BASE 0xC5000000 #define TEGRA_USB3_BASE 0xC5008000 #define TEGRA_USB_ADDR_MASK 0xFFFFC000 -#define TEGRA2_SDRC_CS0 NV_PA_SDRAM_BASE +#define TEGRA20_SDRC_CS0 NV_PA_SDRAM_BASE #define LOW_LEVEL_SRAM_STACK 0x4000FFFC #define EARLY_AVP_STACK (NV_PA_SDRAM_BASE + 0x20000) #define EARLY_CPU_STACK (EARLY_AVP_STACK - 4096) @@ -85,7 +85,7 @@ enum { }; #else /* __ASSEMBLY__ */ -#define PRM_RSTCTRL TEGRA2_PMC_BASE +#define PRM_RSTCTRL TEGRA20_PMC_BASE #endif -#endif /* TEGRA2_H */ +#endif /* TEGRA20_H */ diff --git a/arch/arm/include/asm/arch-tegra2/tegra_i2c.h b/arch/arm/include/asm/arch-tegra20/tegra_i2c.h index cfb136c466..6abfe4e80b 100644 --- a/arch/arm/include/asm/arch-tegra2/tegra_i2c.h +++ b/arch/arm/include/asm/arch-tegra20/tegra_i2c.h @@ -1,5 +1,5 @@ /* - * NVIDIA Tegra2 I2C controller + * NVIDIA Tegra20 I2C controller * * Copyright 2010-2011 NVIDIA Corporation * diff --git a/arch/arm/include/asm/arch-tegra2/tegra_spi.h b/arch/arm/include/asm/arch-tegra20/tegra_spi.h index 892d90c00b..8978beacc5 100644 --- a/arch/arm/include/asm/arch-tegra2/tegra_spi.h +++ b/arch/arm/include/asm/arch-tegra20/tegra_spi.h @@ -1,5 +1,5 @@ /* - * NVIDIA Tegra2 SPI-FLASH controller + * NVIDIA Tegra20 SPI-FLASH controller * * Copyright 2010-2012 NVIDIA Corporation * @@ -70,6 +70,6 @@ struct spi_tegra { #define SPI_STAT_CUR_BLKCNT (1 << 15) #define SPI_TIMEOUT 1000 -#define TEGRA2_SPI_MAX_FREQ 52000000 +#define TEGRA20_SPI_MAX_FREQ 52000000 #endif /* _TEGRA_SPI_H_ */ diff --git a/arch/arm/include/asm/arch-tegra2/timer.h b/arch/arm/include/asm/arch-tegra20/timer.h index adefa2c6c1..43f7ab4efa 100644 --- a/arch/arm/include/asm/arch-tegra2/timer.h +++ b/arch/arm/include/asm/arch-tegra20/timer.h @@ -19,10 +19,10 @@ * MA 02111-1307 USA */ -/* Tegra2 timer functions */ +/* Tegra20 timer functions */ -#ifndef _TEGRA2_TIMER_H -#define _TEGRA2_TIMER_H +#ifndef _TEGRA20_TIMER_H +#define _TEGRA20_TIMER_H /* returns the current monotonic timer value in microseconds */ unsigned long timer_get_us(void); diff --git a/arch/arm/include/asm/arch-tegra2/uart-spi-switch.h b/arch/arm/include/asm/arch-tegra20/uart-spi-switch.h index 82ac180acd..82ac180acd 100644 --- a/arch/arm/include/asm/arch-tegra2/uart-spi-switch.h +++ b/arch/arm/include/asm/arch-tegra20/uart-spi-switch.h diff --git a/arch/arm/include/asm/arch-tegra2/uart.h b/arch/arm/include/asm/arch-tegra20/uart.h index aea29a7588..aea29a7588 100644 --- a/arch/arm/include/asm/arch-tegra2/uart.h +++ b/arch/arm/include/asm/arch-tegra20/uart.h diff --git a/arch/arm/include/asm/arch-tegra2/usb.h b/arch/arm/include/asm/arch-tegra20/usb.h index 638033be50..638033be50 100644 --- a/arch/arm/include/asm/arch-tegra2/usb.h +++ b/arch/arm/include/asm/arch-tegra20/usb.h diff --git a/arch/arm/include/asm/arch-tegra2/warmboot.h b/arch/arm/include/asm/arch-tegra20/warmboot.h index 99ac2e7d23..99ac2e7d23 100644 --- a/arch/arm/include/asm/arch-tegra2/warmboot.h +++ b/arch/arm/include/asm/arch-tegra20/warmboot.h diff --git a/arch/arm/include/asm/arch-u8500/clock.h b/arch/arm/include/asm/arch-u8500/clock.h index b00ab0d215..2a14784093 100644 --- a/arch/arm/include/asm/arch-u8500/clock.h +++ b/arch/arm/include/asm/arch-u8500/clock.h @@ -64,9 +64,6 @@ struct prcmu { extern void u8500_clock_enable(int periph, int kern, int cluster); -static inline void u8500_prcmu_enable(unsigned int *reg) -{ - writel(readl(reg) | (1 << 8), reg); -} +void db8500_clocks_init(void); #endif /* __ASM_ARCH_CLOCK */ diff --git a/arch/arm/include/asm/arch-u8500/db8500_gpio.h b/arch/arm/include/asm/arch-u8500/db8500_gpio.h new file mode 100644 index 0000000000..7c85a89172 --- /dev/null +++ b/arch/arm/include/asm/arch-u8500/db8500_gpio.h @@ -0,0 +1,42 @@ +/* + * Structures and registers for GPIO access in the Nomadik SoC + * + * Code ported from Nomadik GPIO driver in ST-Ericsson Linux kernel code. + * The purpose is that GPIO config found in kernel should work by simply + * copy-paste it to U-boot. + * + * Ported to U-boot by: + * Copyright (C) 2010 Joakim Axelsson <joakim.axelsson AT stericsson.com> + * Copyright (C) 2008 STMicroelectronics + * Author: Prafulla WADASKAR <prafulla.wadaskar@st.com> + * Copyright (C) 2009 Alessandro Rubini <rubini@unipv.it> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __DB8500_GPIO_H__ +#define __DB8500_GPIO_H__ + +/* Alternate functions: function C is set in hw by setting both A and B */ +enum db8500_gpio_alt { + DB8500_GPIO_ALT_GPIO = 0, + DB8500_GPIO_ALT_A = 1, + DB8500_GPIO_ALT_B = 2, + DB8500_GPIO_ALT_C = (DB8500_GPIO_ALT_A | DB8500_GPIO_ALT_B) +}; + +enum db8500_gpio_pull { + DB8500_GPIO_PULL_NONE, + DB8500_GPIO_PULL_UP, + DB8500_GPIO_PULL_DOWN +}; + +void db8500_gpio_set_pull(unsigned gpio, enum db8500_gpio_pull pull); +void db8500_gpio_make_input(unsigned gpio); +int db8500_gpio_get_input(unsigned gpio); +void db8500_gpio_make_output(unsigned gpio, int val); +void db8500_gpio_set_output(unsigned gpio, int val); + +#endif /* __DB8500_GPIO_H__ */ diff --git a/arch/arm/include/asm/arch-u8500/db8500_pincfg.h b/arch/arm/include/asm/arch-u8500/db8500_pincfg.h new file mode 100644 index 0000000000..64957016c1 --- /dev/null +++ b/arch/arm/include/asm/arch-u8500/db8500_pincfg.h @@ -0,0 +1,170 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * Code ported from Nomadik GPIO driver in ST-Ericsson Linux kernel code. + * The purpose is that GPIO config found in kernel should work by simply + * copy-paste it to U-boot. Ported 2010 to U-boot by: + * Author: Joakim Axelsson <joakim.axelsson AT stericsson.com> + * + * License terms: GNU General Public License, version 2 + * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson + * + * + * Based on arch/arm/mach-pxa/include/mach/mfp.h: + * Copyright (C) 2007 Marvell International Ltd. + * eric miao <eric.miao@marvell.com> + */ + +#ifndef __DB8500_PINCFG_H +#define __DB8500_PINCFG_H + +#include "db8500_gpio.h" + +/* + * U-boot info: + * SLPM (sleep mode) config will be ignored by U-boot but it is still + * possible to configure it in order to keep cut-n-paste compability + * with Linux kernel config. + * + * pin configurations are represented by 32-bit integers: + * + * bit 0.. 8 - Pin Number (512 Pins Maximum) + * bit 9..10 - Alternate Function Selection + * bit 11..12 - Pull up/down state + * bit 13 - Sleep mode behaviour (not used in U-boot) + * bit 14 - Direction + * bit 15 - Value (if output) + * bit 16..18 - SLPM pull up/down state (not used in U-boot) + * bit 19..20 - SLPM direction (not used in U-boot) + * bit 21..22 - SLPM Value (if output) (not used in U-boot) + * + * to facilitate the definition, the following macros are provided + * + * PIN_CFG_DEFAULT - default config (0): + * pull up/down = disabled + * sleep mode = input/wakeup + * direction = input + * value = low + * SLPM direction = same as normal + * SLPM pull = same as normal + * SLPM value = same as normal + * + * PIN_CFG - default config with alternate function + * PIN_CFG_PULL - default config with alternate function and pull up/down + */ + +/* Sleep mode */ +enum db8500_gpio_slpm { + DB8500_GPIO_SLPM_INPUT, + DB8500_GPIO_SLPM_WAKEUP_ENABLE = DB8500_GPIO_SLPM_INPUT, + DB8500_GPIO_SLPM_NOCHANGE, + DB8500_GPIO_SLPM_WAKEUP_DISABLE = DB8500_GPIO_SLPM_NOCHANGE, +}; + +#define PIN_NUM_MASK 0x1ff +#define PIN_NUM(x) ((x) & PIN_NUM_MASK) + +#define PIN_ALT_SHIFT 9 +#define PIN_ALT_MASK (0x3 << PIN_ALT_SHIFT) +#define PIN_ALT(x) (((x) & PIN_ALT_MASK) >> PIN_ALT_SHIFT) +#define PIN_GPIO (DB8500_GPIO_ALT_GPIO << PIN_ALT_SHIFT) +#define PIN_ALT_A (DB8500_GPIO_ALT_A << PIN_ALT_SHIFT) +#define PIN_ALT_B (DB8500_GPIO_ALT_B << PIN_ALT_SHIFT) +#define PIN_ALT_C (DB8500_GPIO_ALT_C << PIN_ALT_SHIFT) + +#define PIN_PULL_SHIFT 11 +#define PIN_PULL_MASK (0x3 << PIN_PULL_SHIFT) +#define PIN_PULL(x) (((x) & PIN_PULL_MASK) >> PIN_PULL_SHIFT) +#define PIN_PULL_NONE (DB8500_GPIO_PULL_NONE << PIN_PULL_SHIFT) +#define PIN_PULL_UP (DB8500_GPIO_PULL_UP << PIN_PULL_SHIFT) +#define PIN_PULL_DOWN (DB8500_GPIO_PULL_DOWN << PIN_PULL_SHIFT) + +#define PIN_SLPM_SHIFT 13 +#define PIN_SLPM_MASK (0x1 << PIN_SLPM_SHIFT) +#define PIN_SLPM(x) (((x) & PIN_SLPM_MASK) >> PIN_SLPM_SHIFT) +#define PIN_SLPM_MAKE_INPUT (DB8500_GPIO_SLPM_INPUT << PIN_SLPM_SHIFT) +#define PIN_SLPM_NOCHANGE (DB8500_GPIO_SLPM_NOCHANGE << PIN_SLPM_SHIFT) +/* These two replace the above in DB8500v2+ */ +#define PIN_SLPM_WAKEUP_ENABLE \ + (DB8500_GPIO_SLPM_WAKEUP_ENABLE << PIN_SLPM_SHIFT) +#define PIN_SLPM_WAKEUP_DISABLE \ + (DB8500_GPIO_SLPM_WAKEUP_DISABLE << PIN_SLPM_SHIFT) + +#define PIN_DIR_SHIFT 14 +#define PIN_DIR_MASK (0x1 << PIN_DIR_SHIFT) +#define PIN_DIR(x) (((x) & PIN_DIR_MASK) >> PIN_DIR_SHIFT) +#define PIN_DIR_INPUT (0 << PIN_DIR_SHIFT) +#define PIN_DIR_OUTPUT (1 << PIN_DIR_SHIFT) + +#define PIN_VAL_SHIFT 15 +#define PIN_VAL_MASK (0x1 << PIN_VAL_SHIFT) +#define PIN_VAL(x) (((x) & PIN_VAL_MASK) >> PIN_VAL_SHIFT) +#define PIN_VAL_LOW (0 << PIN_VAL_SHIFT) +#define PIN_VAL_HIGH (1 << PIN_VAL_SHIFT) + +#define PIN_SLPM_PULL_SHIFT 16 +#define PIN_SLPM_PULL_MASK (0x7 << PIN_SLPM_PULL_SHIFT) +#define PIN_SLPM_PULL(x) \ + (((x) & PIN_SLPM_PULL_MASK) >> PIN_SLPM_PULL_SHIFT) +#define PIN_SLPM_PULL_NONE \ + ((1 + DB8500_GPIO_PULL_NONE) << PIN_SLPM_PULL_SHIFT) +#define PIN_SLPM_PULL_UP \ + ((1 + DB8500_GPIO_PULL_UP) << PIN_SLPM_PULL_SHIFT) +#define PIN_SLPM_PULL_DOWN \ + ((1 + DB8500_GPIO_PULL_DOWN) << PIN_SLPM_PULL_SHIFT) + +#define PIN_SLPM_DIR_SHIFT 19 +#define PIN_SLPM_DIR_MASK (0x3 << PIN_SLPM_DIR_SHIFT) +#define PIN_SLPM_DIR(x) \ + (((x) & PIN_SLPM_DIR_MASK) >> PIN_SLPM_DIR_SHIFT) +#define PIN_SLPM_DIR_INPUT ((1 + 0) << PIN_SLPM_DIR_SHIFT) +#define PIN_SLPM_DIR_OUTPUT ((1 + 1) << PIN_SLPM_DIR_SHIFT) + +#define PIN_SLPM_VAL_SHIFT 21 +#define PIN_SLPM_VAL_MASK (0x3 << PIN_SLPM_VAL_SHIFT) +#define PIN_SLPM_VAL(x) \ + (((x) & PIN_SLPM_VAL_MASK) >> PIN_SLPM_VAL_SHIFT) +#define PIN_SLPM_VAL_LOW ((1 + 0) << PIN_SLPM_VAL_SHIFT) +#define PIN_SLPM_VAL_HIGH ((1 + 1) << PIN_SLPM_VAL_SHIFT) + +/* Shortcuts. Use these instead of separate DIR, PULL, and VAL. */ +#define PIN_INPUT_PULLDOWN (PIN_DIR_INPUT | PIN_PULL_DOWN) +#define PIN_INPUT_PULLUP (PIN_DIR_INPUT | PIN_PULL_UP) +#define PIN_INPUT_NOPULL (PIN_DIR_INPUT | PIN_PULL_NONE) +#define PIN_OUTPUT_LOW (PIN_DIR_OUTPUT | PIN_VAL_LOW) +#define PIN_OUTPUT_HIGH (PIN_DIR_OUTPUT | PIN_VAL_HIGH) + +#define PIN_SLPM_INPUT_PULLDOWN (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_DOWN) +#define PIN_SLPM_INPUT_PULLUP (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_UP) +#define PIN_SLPM_INPUT_NOPULL (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_NONE) +#define PIN_SLPM_OUTPUT_LOW (PIN_SLPM_DIR_OUTPUT | PIN_SLPM_VAL_LOW) +#define PIN_SLPM_OUTPUT_HIGH (PIN_SLPM_DIR_OUTPUT | PIN_SLPM_VAL_HIGH) + +#define PIN_CFG_DEFAULT (0) + +#define PIN_CFG(num, alt) \ + (PIN_CFG_DEFAULT |\ + (PIN_NUM(num) | PIN_##alt)) + +#define PIN_CFG_INPUT(num, alt, pull) \ + (PIN_CFG_DEFAULT |\ + (PIN_NUM(num) | PIN_##alt | PIN_INPUT_##pull)) + +#define PIN_CFG_OUTPUT(num, alt, val) \ + (PIN_CFG_DEFAULT |\ + (PIN_NUM(num) | PIN_##alt | PIN_OUTPUT_##val)) + +#define PIN_CFG_PULL(num, alt, pull) \ + ((PIN_CFG_DEFAULT & ~PIN_PULL_MASK) |\ + (PIN_NUM(num) | PIN_##alt | PIN_PULL_##pull)) + +/** + * db8500_gpio_config_pins - configure several pins at once + * @cfgs: array of pin configurations + * @num: number of elments in the array + * + * Configures several GPIO pins. + */ +void db8500_gpio_config_pins(unsigned long *cfgs, size_t num); + +#endif diff --git a/arch/arm/include/asm/arch-u8500/hardware.h b/arch/arm/include/asm/arch-u8500/hardware.h index 6bb95ec070..ee0341932c 100644 --- a/arch/arm/include/asm/arch-u8500/hardware.h +++ b/arch/arm/include/asm/arch-u8500/hardware.h @@ -62,7 +62,7 @@ /* Per4 */ #define U8500_PRCMU_BASE (U8500_PER4_BASE + 0x07000) -#define U8500_PRCMU_TCDM_BASE (U8500_PER4_BASE + 0x0f000) +#define U8500_PRCMU_TCDM_BASE (U8500_PER4_BASE + 0x68000) /* Per3 */ #define U8500_UART2_BASE (U8500_PER3_BASE + 0x7000) @@ -77,7 +77,34 @@ #define U8500_CLKRST1_BASE (U8500_PER1_BASE + 0xf000) /* Last page of Boot ROM */ -#define U8500_BOOTROM_BASE 0x9001f000 -#define U8500_BOOTROM_ASIC_ID_OFFSET 0x0ff4 +#define U8500_BOOTROM_BASE 0x90000000 +#define U8500_ASIC_ID_LOC_ED_V1 (U8500_BOOTROM_BASE + 0x1FFF4) +#define U8500_ASIC_ID_LOC_V2 (U8500_BOOTROM_BASE + 0x1DBF4) + +/* AB8500 specifics */ + +/* address bank */ +#define AB8500_REGU_CTRL2 0x0004 +#define AB8500_MISC 0x0010 + +/* registers */ +#define AB8500_REGU_VRF1VAUX3_REGU_REG 0x040A +#define AB8500_REGU_VRF1VAUX3_SEL_REG 0x0421 +#define AB8500_REV_REG 0x1080 + +#define AB8500_GPIO_SEL2_REG 0x1001 +#define AB8500_GPIO_DIR2_REG 0x1011 +#define AB8500_GPIO_DIR4_REG 0x1013 +#define AB8500_GPIO_SEL4_REG 0x1003 +#define AB8500_GPIO_OUT2_REG 0x1021 +#define AB8500_GPIO_OUT4_REG 0x1023 + +#define LDO_VAUX3_ENABLE_MASK 0x3 +#define LDO_VAUX3_ENABLE_VAL 0x1 +#define LDO_VAUX3_SEL_MASK 0xf +#define LDO_VAUX3_SEL_2V9 0xd +#define LDO_VAUX3_V2_SEL_MASK 0x7 +#define LDO_VAUX3_V2_SEL_2V91 0x7 + #endif /* __ASM_ARCH_HARDWARE_H */ diff --git a/arch/arm/include/asm/arch-u8500/prcmu.h b/arch/arm/include/asm/arch-u8500/prcmu.h new file mode 100644 index 0000000000..e9dcc9325c --- /dev/null +++ b/arch/arm/include/asm/arch-u8500/prcmu.h @@ -0,0 +1,76 @@ +/* + * Copyright (C) 2009 ST-Ericsson SA + * + * Copied from the Linux version: + * Author: Kumar Sanghvi <kumar.sanghvi@stericsson.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#ifndef __MACH_PRCMU_FW_V1_H +#define __MACH_PRCMU_FW_V1_H + +#define AP_EXECUTE 2 +#define I2CREAD 1 +#define I2C_WR_OK 1 +#define I2C_RD_OK 2 +#define I2CWRITE 0 + +#define PRCMU_BASE U8500_PRCMU_BASE +#define PRCMU_BASE_TCDM U8500_PRCMU_TCDM_BASE +#define PRCM_UARTCLK_MGT_REG (PRCMU_BASE + 0x018) +#define PRCM_MSPCLK_MGT_REG (PRCMU_BASE + 0x01C) +#define PRCM_I2CCLK_MGT_REG (PRCMU_BASE + 0x020) +#define PRCM_SDMMCCLK_MGT_REG (PRCMU_BASE + 0x024) +#define PRCM_PER1CLK_MGT_REG (PRCMU_BASE + 0x02C) +#define PRCM_PER2CLK_MGT_REG (PRCMU_BASE + 0x030) +#define PRCM_PER3CLK_MGT_REG (PRCMU_BASE + 0x034) +#define PRCM_PER5CLK_MGT_REG (PRCMU_BASE + 0x038) +#define PRCM_PER6CLK_MGT_REG (PRCMU_BASE + 0x03C) +#define PRCM_PER7CLK_MGT_REG (PRCMU_BASE + 0x040) +#define PRCM_MBOX_CPU_VAL (PRCMU_BASE + 0x0FC) +#define PRCM_MBOX_CPU_SET (PRCMU_BASE + 0x100) + +#define PRCM_ARM_IT1_CLEAR (PRCMU_BASE + 0x48C) +#define PRCM_ARM_IT1_VAL (PRCMU_BASE + 0x494) +#define PRCM_TCR (PRCMU_BASE + 0x1C8) +#define PRCM_REQ_MB5 (PRCMU_BASE_TCDM + 0xE44) +#define PRCM_ACK_MB5 (PRCMU_BASE_TCDM + 0xDF4) +#define PRCM_XP70_CUR_PWR_STATE (PRCMU_BASE_TCDM + 0xFFC) +/* Mailbox 5 Requests */ +#define PRCM_REQ_MB5_I2COPTYPE_REG (PRCM_REQ_MB5 + 0x0) +#define PRCM_REQ_MB5_BIT_FIELDS (PRCM_REQ_MB5 + 0x1) +#define PRCM_REQ_MB5_I2CSLAVE (PRCM_REQ_MB5 + 0x2) +#define PRCM_REQ_MB5_I2CVAL (PRCM_REQ_MB5 + 0x3) + +/* Mailbox 5 ACKs */ +#define PRCM_ACK_MB5_STATUS (PRCM_ACK_MB5 + 0x1) +#define PRCM_ACK_MB5_SLAVE (PRCM_ACK_MB5 + 0x2) +#define PRCM_ACK_MB5_VAL (PRCM_ACK_MB5 + 0x3) + +#define LOW_POWER_WAKEUP 1 +#define EXE_WAKEUP 0 + +#define REQ_MB5 5 + +#define ab8500_read prcmu_i2c_read +#define ab8500_write prcmu_i2c_write + +int prcmu_i2c_read(u8 reg, u16 slave); +int prcmu_i2c_write(u8 reg, u16 slave, u8 reg_data); + +void u8500_prcmu_enable(u32 *reg); +void db8500_prcmu_init(void); + +#endif /* __MACH_PRCMU_FW_V1_H */ diff --git a/arch/arm/include/asm/arch-u8500/sys_proto.h b/arch/arm/include/asm/arch-u8500/sys_proto.h index bac5e79990..a8ef9e5f44 100644 --- a/arch/arm/include/asm/arch-u8500/sys_proto.h +++ b/arch/arm/include/asm/arch-u8500/sys_proto.h @@ -23,5 +23,6 @@ #define _SYS_PROTO_H_ void gpio_init(void); +int u8500_mmc_power_init(void); #endif /* _SYS_PROTO_H_ */ diff --git a/arch/arm/include/asm/emif.h b/arch/arm/include/asm/emif.h index 674c3de661..ed251ec8ec 100644 --- a/arch/arm/include/asm/emif.h +++ b/arch/arm/include/asm/emif.h @@ -19,7 +19,7 @@ #define EMIF1_BASE 0x4c000000 #define EMIF2_BASE 0x4d000000 -/* Registers shifts and masks */ +/* Registers shifts, masks and values */ /* EMIF_MOD_ID_REV */ #define EMIF_REG_SCHEME_SHIFT 30 @@ -46,6 +46,12 @@ /* SDRAM_CONFIG */ #define EMIF_REG_SDRAM_TYPE_SHIFT 29 #define EMIF_REG_SDRAM_TYPE_MASK (0x7 << 29) +#define EMIF_REG_SDRAM_TYPE_DDR1 0 +#define EMIF_REG_SDRAM_TYPE_LPDDR1 1 +#define EMIF_REG_SDRAM_TYPE_DDR2 2 +#define EMIF_REG_SDRAM_TYPE_DDR3 3 +#define EMIF_REG_SDRAM_TYPE_LPDDR2_S4 4 +#define EMIF_REG_SDRAM_TYPE_LPDDR2_S2 5 #define EMIF_REG_IBANK_POS_SHIFT 27 #define EMIF_REG_IBANK_POS_MASK (0x3 << 27) #define EMIF_REG_DDR_TERM_SHIFT 24 diff --git a/arch/arm/include/asm/imx-common/boot_mode.h b/arch/arm/include/asm/imx-common/boot_mode.h new file mode 100644 index 0000000000..6d2df7411b --- /dev/null +++ b/arch/arm/include/asm/imx-common/boot_mode.h @@ -0,0 +1,36 @@ +/* + * Copyright (C) 2012 Boundary Devices Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _ASM_BOOT_MODE_H +#define _ASM_BOOT_MODE_H +#define MAKE_CFGVAL(cfg1, cfg2, cfg3, cfg4) \ + ((cfg4) << 24) | ((cfg3) << 16) | ((cfg2) << 8) | (cfg1) + +struct boot_mode { + const char *name; + unsigned cfg_val; +}; + +void add_board_boot_modes(const struct boot_mode *p); +void boot_mode_apply(unsigned cfg_val); +extern const struct boot_mode soc_boot_modes[]; +#endif diff --git a/arch/arm/include/asm/imx-common/gpio.h b/arch/arm/include/asm/imx-common/gpio.h new file mode 100644 index 0000000000..65226d9b44 --- /dev/null +++ b/arch/arm/include/asm/imx-common/gpio.h @@ -0,0 +1,39 @@ +/* + * Copyright (C) 2011 + * Stefano Babic, DENX Software Engineering, <sbabic@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + +#ifndef __ASM_ARCH_IMX_GPIO_H +#define __ASM_ARCH_IMX_GPIO_H + +#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__)) +/* GPIO registers */ +struct gpio_regs { + u32 gpio_dr; /* data */ + u32 gpio_dir; /* direction */ + u32 gpio_psr; /* pad satus */ +}; +#endif + +#define IMX_GPIO_NR(port, index) ((((port)-1)*32)+((index)&31)) + +#endif diff --git a/arch/arm/include/asm/imx-common/iomux-v3.h b/arch/arm/include/asm/imx-common/iomux-v3.h index 788b413219..4558f4fba2 100644 --- a/arch/arm/include/asm/imx-common/iomux-v3.h +++ b/arch/arm/include/asm/imx-common/iomux-v3.h @@ -100,115 +100,4 @@ typedef u64 iomux_v3_cfg_t; int imx_iomux_v3_setup_pad(iomux_v3_cfg_t pad); int imx_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t *pad_list, unsigned count); -/* - * IOMUXC_GPR13 bit fields - */ -#define IOMUXC_GPR13_SDMA_STOP_REQ (1<<30) -#define IOMUXC_GPR13_CAN2_STOP_REQ (1<<29) -#define IOMUXC_GPR13_CAN1_STOP_REQ (1<<28) -#define IOMUXC_GPR13_ENET_STOP_REQ (1<<27) -#define IOMUXC_GPR13_SATA_PHY_8_MASK (7<<24) -#define IOMUXC_GPR13_SATA_PHY_7_MASK (0x1f<<19) -#define IOMUXC_GPR13_SATA_PHY_6_SHIFT 16 -#define IOMUXC_GPR13_SATA_PHY_6_MASK (7<<IOMUXC_GPR13_SATA_PHY_6_SHIFT) -#define IOMUXC_GPR13_SATA_SPEED_MASK (1<<15) -#define IOMUXC_GPR13_SATA_PHY_5_MASK (1<<14) -#define IOMUXC_GPR13_SATA_PHY_4_MASK (7<<11) -#define IOMUXC_GPR13_SATA_PHY_3_MASK (0x1f<<7) -#define IOMUXC_GPR13_SATA_PHY_2_MASK (0x1f<<2) -#define IOMUXC_GPR13_SATA_PHY_1_MASK (3<<0) - -#define IOMUXC_GPR13_SATA_PHY_8_RXEQ_0P5DB (0b000<<24) -#define IOMUXC_GPR13_SATA_PHY_8_RXEQ_1P0DB (0b001<<24) -#define IOMUXC_GPR13_SATA_PHY_8_RXEQ_1P5DB (0b010<<24) -#define IOMUXC_GPR13_SATA_PHY_8_RXEQ_2P0DB (0b011<<24) -#define IOMUXC_GPR13_SATA_PHY_8_RXEQ_2P5DB (0b100<<24) -#define IOMUXC_GPR13_SATA_PHY_8_RXEQ_3P0DB (0b101<<24) -#define IOMUXC_GPR13_SATA_PHY_8_RXEQ_3P5DB (0b110<<24) -#define IOMUXC_GPR13_SATA_PHY_8_RXEQ_4P0DB (0b111<<24) - -#define IOMUXC_GPR13_SATA_PHY_7_SATA1I (0b10000<<19) -#define IOMUXC_GPR13_SATA_PHY_7_SATA1M (0b10000<<19) -#define IOMUXC_GPR13_SATA_PHY_7_SATA1X (0b11010<<19) -#define IOMUXC_GPR13_SATA_PHY_7_SATA2I (0b10010<<19) -#define IOMUXC_GPR13_SATA_PHY_7_SATA2M (0b10010<<19) -#define IOMUXC_GPR13_SATA_PHY_7_SATA2X (0b11010<<19) - -#define IOMUXC_GPR13_SATA_SPEED_1P5G (0<<15) -#define IOMUXC_GPR13_SATA_SPEED_3G (1<<15) - -#define IOMUXC_GPR13_SATA_SATA_PHY_5_SS_DISABLED (0<<14) -#define IOMUXC_GPR13_SATA_SATA_PHY_5_SS_ENABLED (1<<14) - -#define IOMUXC_GPR13_SATA_SATA_PHY_4_ATTEN_16_16 (0<<11) -#define IOMUXC_GPR13_SATA_SATA_PHY_4_ATTEN_14_16 (1<<11) -#define IOMUXC_GPR13_SATA_SATA_PHY_4_ATTEN_12_16 (2<<11) -#define IOMUXC_GPR13_SATA_SATA_PHY_4_ATTEN_10_16 (3<<11) -#define IOMUXC_GPR13_SATA_SATA_PHY_4_ATTEN_9_16 (4<<11) -#define IOMUXC_GPR13_SATA_SATA_PHY_4_ATTEN_8_16 (5<<11) - -#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_0P00_DB (0b0000<<7) -#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_0P37_DB (0b0001<<7) -#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_0P74_DB (0b0010<<7) -#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_1P11_DB (0b0011<<7) -#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_1P48_DB (0b0100<<7) -#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_1P85_DB (0b0101<<7) -#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_2P22_DB (0b0110<<7) -#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_2P59_DB (0b0111<<7) -#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_2P96_DB (0b1000<<7) -#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_3P33_DB (0b1001<<7) -#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_3P70_DB (0b1010<<7) -#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_4P07_DB (0b1011<<7) -#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_4P44_DB (0b1100<<7) -#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_4P81_DB (0b1101<<7) -#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_5P28_DB (0b1110<<7) -#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_5P75_DB (0b1111<<7) - -#define IOMUXC_GPR13_SATA_PHY_2_TX_0P937V (0b00000<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_0P947V (0b00001<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_0P957V (0b00010<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_0P966V (0b00011<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_0P976V (0b00100<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_0P986V (0b00101<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_0P996V (0b00110<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_1P005V (0b00111<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_1P015V (0b01000<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_1P025V (0b01001<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_1P035V (0b01010<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_1P045V (0b01011<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_1P054V (0b01100<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_1P064V (0b01101<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_1P074V (0b01110<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_1P084V (0b01111<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_1P094V (0b10000<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_1P104V (0b10001<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_1P113V (0b10010<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_1P123V (0b10011<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_1P133V (0b10100<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_1P143V (0b10101<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_1P152V (0b10110<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_1P162V (0b10111<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_1P172V (0b11000<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_1P182V (0b11001<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_1P191V (0b11010<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_1P201V (0b11011<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_1P211V (0b11100<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_1P221V (0b11101<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_1P230V (0b11110<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_1P240V (0b11111<<2) - -#define IOMUXC_GPR13_SATA_PHY_1_FAST 0 -#define IOMUXC_GPR13_SATA_PHY_1_MEDIUM 1 -#define IOMUXC_GPR13_SATA_PHY_1_SLOW 2 - -#define IOMUXC_GPR13_SATA_MASK (IOMUXC_GPR13_SATA_PHY_8_MASK \ - |IOMUXC_GPR13_SATA_PHY_7_MASK \ - |IOMUXC_GPR13_SATA_PHY_6_MASK \ - |IOMUXC_GPR13_SATA_SPEED_MASK \ - |IOMUXC_GPR13_SATA_PHY_5_MASK \ - |IOMUXC_GPR13_SATA_PHY_4_MASK \ - |IOMUXC_GPR13_SATA_PHY_3_MASK \ - |IOMUXC_GPR13_SATA_PHY_2_MASK \ - |IOMUXC_GPR13_SATA_PHY_1_MASK) - #endif /* __MACH_IOMUX_V3_H__*/ diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h index 4e95eee59b..71ef9b077f 100644 --- a/arch/arm/include/asm/omap_common.h +++ b/arch/arm/include/asm/omap_common.h @@ -67,7 +67,7 @@ void preloader_console_init(void); #elif defined(CONFIG_AM33XX) /* AM33XX */ #define BOOT_DEVICE_NAND 5 #define BOOT_DEVICE_MMC1 8 -#define BOOT_DEVICE_MMC2 0 +#define BOOT_DEVICE_MMC2 9 /* eMMC or daughter card */ #define BOOT_DEVICE_UART 65 #define BOOT_DEVICE_MMC2_2 0xFF #endif diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile index 39a9550376..bd3b77f2e6 100644 --- a/arch/arm/lib/Makefile +++ b/arch/arm/lib/Makefile @@ -26,7 +26,6 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(ARCH).o LIBGCC = $(obj)libgcc.o -ifndef CONFIG_SPL_BUILD GLSOBJS += _ashldi3.o GLSOBJS += _ashrdi3.o GLSOBJS += _divsi3.o @@ -37,6 +36,7 @@ GLSOBJS += _umodsi3.o GLCOBJS += div0.o +ifndef CONFIG_SPL_BUILD COBJS-y += board.o COBJS-y += bootm.o COBJS-$(CONFIG_SYS_L2_PL310) += cache-pl310.o diff --git a/arch/powerpc/include/asm/u-boot.h b/arch/powerpc/include/asm/u-boot.h index 1552054117..b2fa2b574b 100644 --- a/arch/powerpc/include/asm/u-boot.h +++ b/arch/powerpc/include/asm/u-boot.h @@ -63,6 +63,7 @@ typedef struct bd_info { unsigned long bi_vcofreq; /* VCO Freq, in MHz */ #endif unsigned long bi_bootflags; /* boot / reboot flag (Unused) */ + unsigned long bi_ip_addr; /* IP Address */ unsigned char bi_enetaddr[6]; /* OLD: see README.enetaddr */ unsigned short bi_ethspeed; /* Ethernet speed in Mbps */ unsigned long bi_intfreq; /* Internal Freq, in MHz */ diff --git a/arch/powerpc/lib/ticks.S b/arch/powerpc/lib/ticks.S index b8d25b7f46..17810395b8 100644 --- a/arch/powerpc/lib/ticks.S +++ b/arch/powerpc/lib/ticks.S @@ -47,7 +47,9 @@ get_ticks: */ .globl wait_ticks wait_ticks: - mflr r8 /* save link register */ + stwu r1, -16(r1) + mflr r0 /* save link register */ + stw r0, 20(r1) /* Use r0 or GDB will be unhappy */ mr r7, r3 /* save tick count */ bl get_ticks /* Get start time */ @@ -61,5 +63,6 @@ wait_ticks: subfe. r3, r3, r6 bge 1b /* Loop until time expired */ - mtlr r8 /* restore link register */ + mtlr r0 /* restore link register */ + addi r1,r1,16 blr |