summaryrefslogtreecommitdiff
path: root/arch
diff options
context:
space:
mode:
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/cpu/armv7/am33xx/Makefile1
-rw-r--r--arch/arm/cpu/armv7/am33xx/elm.c196
-rw-r--r--arch/arm/cpu/armv7/am33xx/mem.c52
-rw-r--r--arch/arm/include/asm/arch-am33xx/mem.h5
-rw-r--r--arch/arm/include/asm/omap_elm.h (renamed from arch/arm/include/asm/arch-am33xx/elm.h)0
-rw-r--r--arch/arm/include/asm/omap_gpmc.h16
-rw-r--r--arch/powerpc/cpu/mpc8xxx/fsl_ifc.c24
-rw-r--r--arch/powerpc/include/asm/fsl_ifc.h2
8 files changed, 71 insertions, 225 deletions
diff --git a/arch/arm/cpu/armv7/am33xx/Makefile b/arch/arm/cpu/armv7/am33xx/Makefile
index 966fcab71b..5566310d94 100644
--- a/arch/arm/cpu/armv7/am33xx/Makefile
+++ b/arch/arm/cpu/armv7/am33xx/Makefile
@@ -19,4 +19,3 @@ obj-y += ddr.o
obj-y += emif4.o
obj-y += board.o
obj-y += mux.o
-obj-$(CONFIG_NAND_OMAP_GPMC) += elm.o
diff --git a/arch/arm/cpu/armv7/am33xx/elm.c b/arch/arm/cpu/armv7/am33xx/elm.c
deleted file mode 100644
index 8f1d6afdd3..0000000000
--- a/arch/arm/cpu/armv7/am33xx/elm.c
+++ /dev/null
@@ -1,196 +0,0 @@
-/*
- * (C) Copyright 2010-2011 Texas Instruments, <www.ti.com>
- * Mansoor Ahamed <mansoor.ahamed@ti.com>
- *
- * BCH Error Location Module (ELM) support.
- *
- * NOTE:
- * 1. Supports only continuous mode. Dont see need for page mode in uboot
- * 2. Supports only syndrome polynomial 0. i.e. poly local variable is
- * always set to ELM_DEFAULT_POLY. Dont see need for other polynomial
- * sets in uboot
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/errno.h>
-#include <asm/arch/cpu.h>
-#include <asm/omap_gpmc.h>
-#include <asm/arch/elm.h>
-
-#define ELM_DEFAULT_POLY (0)
-
-struct elm *elm_cfg;
-
-/**
- * elm_load_syndromes - Load BCH syndromes based on nibble selection
- * @syndrome: BCH syndrome
- * @nibbles:
- * @poly: Syndrome Polynomial set to use
- *
- * Load BCH syndromes based on nibble selection
- */
-static void elm_load_syndromes(u8 *syndrome, u32 nibbles, u8 poly)
-{
- u32 *ptr;
- u32 val;
-
- /* reg 0 */
- ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[0];
- val = syndrome[0] | (syndrome[1] << 8) | (syndrome[2] << 16) |
- (syndrome[3] << 24);
- writel(val, ptr);
- /* reg 1 */
- ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[1];
- val = syndrome[4] | (syndrome[5] << 8) | (syndrome[6] << 16) |
- (syndrome[7] << 24);
- writel(val, ptr);
-
- /* BCH 8-bit with 26 nibbles (4*8=32) */
- if (nibbles > 13) {
- /* reg 2 */
- ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[2];
- val = syndrome[8] | (syndrome[9] << 8) | (syndrome[10] << 16) |
- (syndrome[11] << 24);
- writel(val, ptr);
- /* reg 3 */
- ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[3];
- val = syndrome[12] | (syndrome[13] << 8) |
- (syndrome[14] << 16) | (syndrome[15] << 24);
- writel(val, ptr);
- }
-
- /* BCH 16-bit with 52 nibbles (7*8=56) */
- if (nibbles > 26) {
- /* reg 4 */
- ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[4];
- val = syndrome[16] | (syndrome[17] << 8) |
- (syndrome[18] << 16) | (syndrome[19] << 24);
- writel(val, ptr);
-
- /* reg 5 */
- ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[5];
- val = syndrome[20] | (syndrome[21] << 8) |
- (syndrome[22] << 16) | (syndrome[23] << 24);
- writel(val, ptr);
-
- /* reg 6 */
- ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[6];
- val = syndrome[24] | (syndrome[25] << 8) |
- (syndrome[26] << 16) | (syndrome[27] << 24);
- writel(val, ptr);
- }
-}
-
-/**
- * elm_check_errors - Check for BCH errors and return error locations
- * @syndrome: BCH syndrome
- * @nibbles:
- * @error_count: Returns number of errrors in the syndrome
- * @error_locations: Returns error locations (in decimal) in this array
- *
- * Check the provided syndrome for BCH errors and return error count
- * and locations in the array passed. Returns -1 if error is not correctable,
- * else returns 0
- */
-int elm_check_error(u8 *syndrome, u32 nibbles, u32 *error_count,
- u32 *error_locations)
-{
- u8 poly = ELM_DEFAULT_POLY;
- s8 i;
- u32 location_status;
-
- elm_load_syndromes(syndrome, nibbles, poly);
-
- /* start processing */
- writel((readl(&elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[6])
- | ELM_SYNDROME_FRAGMENT_6_SYNDROME_VALID),
- &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[6]);
-
- /* wait for processing to complete */
- while ((readl(&elm_cfg->irqstatus) & (0x1 << poly)) != 0x1)
- ;
- /* clear status */
- writel((readl(&elm_cfg->irqstatus) | (0x1 << poly)),
- &elm_cfg->irqstatus);
-
- /* check if correctable */
- location_status = readl(&elm_cfg->error_location[poly].location_status);
- if (!(location_status & ELM_LOCATION_STATUS_ECC_CORRECTABLE_MASK))
- return -1;
-
- /* get error count */
- *error_count = readl(&elm_cfg->error_location[poly].location_status) &
- ELM_LOCATION_STATUS_ECC_NB_ERRORS_MASK;
-
- for (i = 0; i < *error_count; i++) {
- error_locations[i] =
- readl(&elm_cfg->error_location[poly].error_location_x[i]);
- }
-
- return 0;
-}
-
-
-/**
- * elm_config - Configure ELM module
- * @level: 4 / 8 / 16 bit BCH
- *
- * Configure ELM module based on BCH level.
- * Set mode as continuous mode.
- * Currently we are using only syndrome 0 and syndromes 1 to 6 are not used.
- * Also, the mode is set only for syndrome 0
- */
-int elm_config(enum bch_level level)
-{
- u32 val;
- u8 poly = ELM_DEFAULT_POLY;
- u32 buffer_size = 0x7FF;
-
- /* config size and level */
- val = (u32)(level) & ELM_LOCATION_CONFIG_ECC_BCH_LEVEL_MASK;
- val |= ((buffer_size << ELM_LOCATION_CONFIG_ECC_SIZE_POS) &
- ELM_LOCATION_CONFIG_ECC_SIZE_MASK);
- writel(val, &elm_cfg->location_config);
-
- /* config continous mode */
- /* enable interrupt generation for syndrome polynomial set */
- writel((readl(&elm_cfg->irqenable) | (0x1 << poly)),
- &elm_cfg->irqenable);
- /* set continuous mode for the syndrome polynomial set */
- writel((readl(&elm_cfg->page_ctrl) & ~(0x1 << poly)),
- &elm_cfg->page_ctrl);
-
- return 0;
-}
-
-/**
- * elm_reset - Do a soft reset of ELM
- *
- * Perform a soft reset of ELM and return after reset is done.
- */
-void elm_reset(void)
-{
- /* initiate reset */
- writel((readl(&elm_cfg->sysconfig) | ELM_SYSCONFIG_SOFTRESET),
- &elm_cfg->sysconfig);
-
- /* wait for reset complete and normal operation */
- while ((readl(&elm_cfg->sysstatus) & ELM_SYSSTATUS_RESETDONE) !=
- ELM_SYSSTATUS_RESETDONE)
- ;
-}
-
-/**
- * elm_init - Initialize ELM module
- *
- * Initialize ELM support. Currently it does only base address init
- * and ELM reset.
- */
-void elm_init(void)
-{
- elm_cfg = (struct elm *)ELM_BASE;
- elm_reset();
-}
diff --git a/arch/arm/cpu/armv7/am33xx/mem.c b/arch/arm/cpu/armv7/am33xx/mem.c
index b6eb46678f..56c9e7dbce 100644
--- a/arch/arm/cpu/armv7/am33xx/mem.c
+++ b/arch/arm/cpu/armv7/am33xx/mem.c
@@ -22,17 +22,6 @@
struct gpmc *gpmc_cfg;
-#if defined(CONFIG_CMD_NAND)
-static const u32 gpmc_m_nand[GPMC_MAX_REG] = {
- M_NAND_GPMC_CONFIG1,
- M_NAND_GPMC_CONFIG2,
- M_NAND_GPMC_CONFIG3,
- M_NAND_GPMC_CONFIG4,
- M_NAND_GPMC_CONFIG5,
- M_NAND_GPMC_CONFIG6, 0
-};
-#endif
-
void enable_gpmc_cs_config(const u32 *gpmc_config, struct gpmc_cs *cs, u32 base,
u32 size)
@@ -61,11 +50,34 @@ void gpmc_init(void)
{
/* putting a blanket check on GPMC based on ZeBu for now */
gpmc_cfg = (struct gpmc *)GPMC_BASE;
-
-#ifdef CONFIG_CMD_NAND
- const u32 *gpmc_config = NULL;
- u32 base = 0;
+#if defined(CONFIG_NOR)
+/* configure GPMC for NOR */
+ const u32 gpmc_regs[GPMC_MAX_REG] = { STNOR_GPMC_CONFIG1,
+ STNOR_GPMC_CONFIG2,
+ STNOR_GPMC_CONFIG3,
+ STNOR_GPMC_CONFIG4,
+ STNOR_GPMC_CONFIG5,
+ STNOR_GPMC_CONFIG6,
+ STNOR_GPMC_CONFIG7
+ };
+ u32 size = GPMC_SIZE_16M;
+ u32 base = CONFIG_SYS_FLASH_BASE;
+#elif defined(CONFIG_NAND)
+/* configure GPMC for NAND */
+ const u32 gpmc_regs[GPMC_MAX_REG] = { M_NAND_GPMC_CONFIG1,
+ M_NAND_GPMC_CONFIG2,
+ M_NAND_GPMC_CONFIG3,
+ M_NAND_GPMC_CONFIG4,
+ M_NAND_GPMC_CONFIG5,
+ M_NAND_GPMC_CONFIG6,
+ 0
+ };
+ u32 size = GPMC_SIZE_256M;
+ u32 base = CONFIG_SYS_NAND_BASE;
+#else
+ const u32 gpmc_regs[GPMC_MAX_REG] = { 0, 0, 0, 0, 0, 0, 0 };
u32 size = 0;
+ u32 base = 0;
#endif
/* global settings */
writel(0x00000008, &gpmc_cfg->sysconfig);
@@ -81,12 +93,6 @@ void gpmc_init(void)
*/
writel(0, &gpmc_cfg->cs[0].config7);
sdelay(1000);
-
-#ifdef CONFIG_CMD_NAND
- gpmc_config = gpmc_m_nand;
-
- base = PISMO1_NAND_BASE;
- size = PISMO1_NAND_SIZE;
- enable_gpmc_cs_config(gpmc_config, &gpmc_cfg->cs[0], base, size);
-#endif
+ /* enable chip-select specific configurations */
+ enable_gpmc_cs_config(gpmc_regs, &gpmc_cfg->cs[0], base, size);
}
diff --git a/arch/arm/include/asm/arch-am33xx/mem.h b/arch/arm/include/asm/arch-am33xx/mem.h
index 983ea28dc0..e7e8c58b00 100644
--- a/arch/arm/include/asm/arch-am33xx/mem.h
+++ b/arch/arm/include/asm/arch-am33xx/mem.h
@@ -68,9 +68,4 @@
#define PISMO2_NAND_CS0 7
#define PISMO2_NAND_CS1 8
-/* make it readable for the gpmc_init */
-#define PISMO1_NOR_BASE FLASH_BASE
-#define PISMO1_NAND_BASE CONFIG_SYS_NAND_BASE
-#define PISMO1_NAND_SIZE GPMC_SIZE_256M
-
#endif /* endif _MEM_H_ */
diff --git a/arch/arm/include/asm/arch-am33xx/elm.h b/arch/arm/include/asm/omap_elm.h
index 45454eaf0f..45454eaf0f 100644
--- a/arch/arm/include/asm/arch-am33xx/elm.h
+++ b/arch/arm/include/asm/omap_elm.h
diff --git a/arch/arm/include/asm/omap_gpmc.h b/arch/arm/include/asm/omap_gpmc.h
index dd40cb6c16..d4143ecd80 100644
--- a/arch/arm/include/asm/omap_gpmc.h
+++ b/arch/arm/include/asm/omap_gpmc.h
@@ -68,4 +68,20 @@
}
#endif
+enum omap_ecc {
+ /* 1-bit ECC calculation by Software, Error detection by Software */
+ OMAP_ECC_HAM1_CODE_SW = 1, /* avoid un-initialized int can be 0x0 */
+ /* 1-bit ECC calculation by GPMC, Error detection by Software */
+ /* ECC layout compatible to legacy ROMCODE. */
+ OMAP_ECC_HAM1_CODE_HW,
+ /* 4-bit ECC calculation by GPMC, Error detection by Software */
+ OMAP_ECC_BCH4_CODE_HW_DETECTION_SW,
+ /* 4-bit ECC calculation by GPMC, Error detection by ELM */
+ OMAP_ECC_BCH4_CODE_HW,
+ /* 8-bit ECC calculation by GPMC, Error detection by Software */
+ OMAP_ECC_BCH8_CODE_HW_DETECTION_SW,
+ /* 8-bit ECC calculation by GPMC, Error detection by ELM */
+ OMAP_ECC_BCH8_CODE_HW,
+};
+
#endif /* __ASM_OMAP_GPMC_H */
diff --git a/arch/powerpc/cpu/mpc8xxx/fsl_ifc.c b/arch/powerpc/cpu/mpc8xxx/fsl_ifc.c
index 2d0fb433bc..64a52258a0 100644
--- a/arch/powerpc/cpu/mpc8xxx/fsl_ifc.c
+++ b/arch/powerpc/cpu/mpc8xxx/fsl_ifc.c
@@ -34,6 +34,9 @@ void init_early_memctl_regs(void)
#ifdef CONFIG_SYS_CSPR0_EXT
set_ifc_cspr_ext(IFC_CS0, CONFIG_SYS_CSPR0_EXT);
#endif
+#ifdef CONFIG_SYS_CSOR0_EXT
+ set_ifc_csor_ext(IFC_CS0, CONFIG_SYS_CSOR0_EXT);
+#endif
set_ifc_cspr(IFC_CS0, CONFIG_SYS_CSPR0);
set_ifc_amask(IFC_CS0, CONFIG_SYS_AMASK0);
set_ifc_csor(IFC_CS0, CONFIG_SYS_CSOR0);
@@ -43,6 +46,9 @@ void init_early_memctl_regs(void)
#ifdef CONFIG_SYS_CSPR1_EXT
set_ifc_cspr_ext(IFC_CS1, CONFIG_SYS_CSPR1_EXT);
#endif
+#ifdef CONFIG_SYS_CSOR1_EXT
+ set_ifc_csor_ext(IFC_CS1, CONFIG_SYS_CSOR1_EXT);
+#endif
#if defined(CONFIG_SYS_CSPR1) && defined(CONFIG_SYS_CSOR1)
set_ifc_ftim(IFC_CS1, IFC_FTIM0, CONFIG_SYS_CS1_FTIM0);
set_ifc_ftim(IFC_CS1, IFC_FTIM1, CONFIG_SYS_CS1_FTIM1);
@@ -57,6 +63,9 @@ void init_early_memctl_regs(void)
#ifdef CONFIG_SYS_CSPR2_EXT
set_ifc_cspr_ext(IFC_CS2, CONFIG_SYS_CSPR2_EXT);
#endif
+#ifdef CONFIG_SYS_CSOR2_EXT
+ set_ifc_csor_ext(IFC_CS2, CONFIG_SYS_CSOR2_EXT);
+#endif
#if defined(CONFIG_SYS_CSPR2) && defined(CONFIG_SYS_CSOR2)
set_ifc_ftim(IFC_CS2, IFC_FTIM0, CONFIG_SYS_CS2_FTIM0);
set_ifc_ftim(IFC_CS2, IFC_FTIM1, CONFIG_SYS_CS2_FTIM1);
@@ -71,6 +80,9 @@ void init_early_memctl_regs(void)
#ifdef CONFIG_SYS_CSPR3_EXT
set_ifc_cspr_ext(IFC_CS3, CONFIG_SYS_CSPR3_EXT);
#endif
+#ifdef CONFIG_SYS_CSOR3_EXT
+ set_ifc_csor_ext(IFC_CS3, CONFIG_SYS_CSOR3_EXT);
+#endif
#if defined(CONFIG_SYS_CSPR3) && defined(CONFIG_SYS_CSOR3)
set_ifc_ftim(IFC_CS3, IFC_FTIM0, CONFIG_SYS_CS3_FTIM0);
set_ifc_ftim(IFC_CS3, IFC_FTIM1, CONFIG_SYS_CS3_FTIM1);
@@ -85,6 +97,9 @@ void init_early_memctl_regs(void)
#ifdef CONFIG_SYS_CSPR4_EXT
set_ifc_cspr_ext(IFC_CS4, CONFIG_SYS_CSPR4_EXT);
#endif
+#ifdef CONFIG_SYS_CSOR4_EXT
+ set_ifc_csor_ext(IFC_CS4, CONFIG_SYS_CSOR4_EXT);
+#endif
#if defined(CONFIG_SYS_CSPR4) && defined(CONFIG_SYS_CSOR4)
set_ifc_ftim(IFC_CS4, IFC_FTIM0, CONFIG_SYS_CS4_FTIM0);
set_ifc_ftim(IFC_CS4, IFC_FTIM1, CONFIG_SYS_CS4_FTIM1);
@@ -99,6 +114,9 @@ void init_early_memctl_regs(void)
#ifdef CONFIG_SYS_CSPR5_EXT
set_ifc_cspr_ext(IFC_CS5, CONFIG_SYS_CSPR5_EXT);
#endif
+#ifdef CONFIG_SYS_CSOR5_EXT
+ set_ifc_csor_ext(IFC_CS5, CONFIG_SYS_CSOR5_EXT);
+#endif
#if defined(CONFIG_SYS_CSPR5) && defined(CONFIG_SYS_CSOR5)
set_ifc_ftim(IFC_CS5, IFC_FTIM0, CONFIG_SYS_CS5_FTIM0);
set_ifc_ftim(IFC_CS5, IFC_FTIM1, CONFIG_SYS_CS5_FTIM1);
@@ -113,6 +131,9 @@ void init_early_memctl_regs(void)
#ifdef CONFIG_SYS_CSPR6_EXT
set_ifc_cspr_ext(IFC_CS6, CONFIG_SYS_CSPR6_EXT);
#endif
+#ifdef CONFIG_SYS_CSOR6_EXT
+ set_ifc_csor_ext(IFC_CS6, CONFIG_SYS_CSOR6_EXT);
+#endif
#if defined(CONFIG_SYS_CSPR6) && defined(CONFIG_SYS_CSOR6)
set_ifc_ftim(IFC_CS6, IFC_FTIM0, CONFIG_SYS_CS6_FTIM0);
set_ifc_ftim(IFC_CS6, IFC_FTIM1, CONFIG_SYS_CS6_FTIM1);
@@ -127,6 +148,9 @@ void init_early_memctl_regs(void)
#ifdef CONFIG_SYS_CSPR7_EXT
set_ifc_cspr_ext(IFC_CS7, CONFIG_SYS_CSPR7_EXT);
#endif
+#ifdef CONFIG_SYS_CSOR7_EXT
+ set_ifc_csor_ext(IFC_CS7, CONFIG_SYS_CSOR7_EXT);
+#endif
#if defined(CONFIG_SYS_CSPR7) && defined(CONFIG_SYS_CSOR7)
set_ifc_ftim(IFC_CS7, IFC_FTIM0, CONFIG_SYS_CS7_FTIM0);
set_ifc_ftim(IFC_CS7, IFC_FTIM1, CONFIG_SYS_CS7_FTIM1);
diff --git a/arch/powerpc/include/asm/fsl_ifc.h b/arch/powerpc/include/asm/fsl_ifc.h
index a945e4b2d4..182b1a6333 100644
--- a/arch/powerpc/include/asm/fsl_ifc.h
+++ b/arch/powerpc/include/asm/fsl_ifc.h
@@ -77,6 +77,7 @@
#define CSOR_NAND_PGS_512 0x00000000
#define CSOR_NAND_PGS_2K 0x00080000
#define CSOR_NAND_PGS_4K 0x00100000
+#define CSOR_NAND_PGS_8K 0x00180000
/* Spare region Size */
#define CSOR_NAND_SPRZ_MASK 0x0000E000
#define CSOR_NAND_SPRZ_SHIFT 13
@@ -86,6 +87,7 @@
#define CSOR_NAND_SPRZ_210 0x00006000
#define CSOR_NAND_SPRZ_218 0x00008000
#define CSOR_NAND_SPRZ_224 0x0000A000
+#define CSOR_NAND_SPRZ_CSOR_EXT 0x0000C000
/* Pages Per Block */
#define CSOR_NAND_PB_MASK 0x00000700
#define CSOR_NAND_PB_SHIFT 8