diff options
Diffstat (limited to 'board/Marvell/dkb/dkb.c')
-rw-r--r-- | board/Marvell/dkb/dkb.c | 85 |
1 files changed, 0 insertions, 85 deletions
diff --git a/board/Marvell/dkb/dkb.c b/board/Marvell/dkb/dkb.c deleted file mode 100644 index c0c31259a3..0000000000 --- a/board/Marvell/dkb/dkb.c +++ /dev/null @@ -1,85 +0,0 @@ -/* - * (C) Copyright 2011 - * Marvell Semiconductor <www.marvell.com> - * Written-by: Lei Wen <leiwen@marvell.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <mvmfp.h> -#include <i2c.h> -#include <asm/arch/mfp.h> -#include <asm/arch/cpu.h> -#ifdef CONFIG_GENERIC_MMC -#include <sdhci.h> -#endif - -DECLARE_GLOBAL_DATA_PTR; - -int board_early_init_f(void) -{ - u32 mfp_cfg[] = { - /* Enable Console on UART2 */ - MFP47_UART2_RXD, - MFP48_UART2_TXD, - - /* I2C */ - MFP53_CI2C_SCL, - MFP54_CI2C_SDA, - - /* MMC1 */ - MFP_MMC1_DAT7, - MFP_MMC1_DAT6, - MFP_MMC1_DAT5, - MFP_MMC1_DAT4, - MFP_MMC1_DAT3, - MFP_MMC1_DAT2, - MFP_MMC1_DAT1, - MFP_MMC1_DAT0, - MFP_MMC1_CMD, - MFP_MMC1_CLK, - MFP_MMC1_CD, - MFP_MMC1_WP, - - MFP_EOC /*End of configureation*/ - }; - /* configure MFP's */ - mfp_config(mfp_cfg); - - return 0; -} - -int board_init(void) -{ - /* arch number of Board */ - gd->bd->bi_arch_number = MACH_TYPE_TTC_DKB; - /* adress of boot parameters */ - gd->bd->bi_boot_params = panth_sdram_base(0) + 0x100; - return 0; -} - -#ifdef CONFIG_GENERIC_MMC -#define I2C_SLAVE_ADDR 0x34 -#define LDO13_REG 0x28 -#define LDO_V30 0x6 -#define LDO_VOLTAGE(x) ((x & 0x7) << 1) -#define LDO_EN 0x1 -int board_mmc_init(bd_t *bd) -{ - ulong mmc_base_address[CONFIG_SYS_MMC_NUM] = CONFIG_SYS_MMC_BASE; - u8 i, data; - - /* set LDO 13 to 3.0v */ - data = LDO_VOLTAGE(LDO_V30) | LDO_EN; - i2c_write(I2C_SLAVE_ADDR, LDO13_REG, 1, &data, 1); - - for (i = 0; i < CONFIG_SYS_MMC_NUM; i++) { - if (mv_sdh_init(mmc_base_address[i], 0, 0, - SDHCI_QUIRK_32BIT_DMA_ADDR)) - return 1; - } - - return 0; -} -#endif |