diff options
Diffstat (limited to 'board/amlogic/p200/README.nanopi-k2')
| -rw-r--r-- | board/amlogic/p200/README.nanopi-k2 | 98 |
1 files changed, 0 insertions, 98 deletions
diff --git a/board/amlogic/p200/README.nanopi-k2 b/board/amlogic/p200/README.nanopi-k2 deleted file mode 100644 index c8dec3569b..0000000000 --- a/board/amlogic/p200/README.nanopi-k2 +++ /dev/null @@ -1,98 +0,0 @@ -U-Boot for NanoPi-K2 -==================== - -NanoPi-K2 is a single board computer manufactured by FriendlyElec -with the following specifications: - - - Amlogic S905 ARM Cortex-A53 quad-core SoC @ 1.5GHz - - ARM Mali 450 GPU - - 2GB DDR3 SDRAM - - Gigabit Ethernet - - HDMI 2.0 4K/60Hz display - - 40-pin GPIO header - - 4 x USB 2.0 Host, 1 x USB OTG - - eMMC, microSD - - Infrared receiver - -Schematics are available on the manufacturer website. - -Currently the u-boot port supports the following devices: - - serial - - eMMC, microSD - - Ethernet - -u-boot compilation -================== - - > export CROSS_COMPILE=aarch64-none-elf- - > make nanopi-k2_defconfig - > make - -Image creation -============== - -Amlogic doesn't provide sources for the firmware and for tools needed -to create the bootloader image, so it is necessary to obtain them from -the git tree published by the board vendor: - - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz - > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz - > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz - > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH - > git clone https://github.com/BayLibre/u-boot.git -b libretech-cc amlogic-u-boot - > git clone https://github.com/friendlyarm/u-boot.git -b nanopi-k2-v2015.01 amlogic-u-boot - > cd amlogic-u-boot - > sed -i 's/aarch64-linux-gnu-/aarch64-none-elf-/' Makefile - > sed -i 's/arm-linux-/arm-none-eabi-/' arch/arm/cpu/armv8/gxb/firmware/scp_task/Makefile - > make nanopi-k2_defconfig - > make - > export FIPDIR=$PWD/fip - -Go back to mainline U-Boot source tree then : - > mkdir fip - - > cp $FIPDIR/gxb/bl2.bin fip/ - > cp $FIPDIR/gxb/acs.bin fip/ - > cp $FIPDIR/gxb/bl21.bin fip/ - > cp $FIPDIR/gxb/bl30.bin fip/ - > cp $FIPDIR/gxb/bl301.bin fip/ - > cp $FIPDIR/gxb/bl31.img fip/ - > cp u-boot.bin fip/bl33.bin - - > $FIPDIR/blx_fix.sh \ - fip/bl30.bin \ - fip/zero_tmp \ - fip/bl30_zero.bin \ - fip/bl301.bin \ - fip/bl301_zero.bin \ - fip/bl30_new.bin \ - bl30 - - > $FIPDIR/fip_create \ - --bl30 fip/bl30_new.bin \ - --bl31 fip/bl31.img \ - --bl33 fip/bl33.bin \ - fip/fip.bin - - > python $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 - - > $FIPDIR/blx_fix.sh \ - fip/bl2_acs.bin \ - fip/zero_tmp \ - fip/bl2_zero.bin \ - fip/bl21.bin \ - fip/bl21_zero.bin \ - fip/bl2_new.bin \ - bl2 - - > cat fip/bl2_new.bin fip/fip.bin > fip/boot_new.bin - - > $FIPDIR/gxb/aml_encrypt_gxb --bootsig \ - --input fip/boot_new.bin - --output fip/u-boot.bin - -and then write the image to SD with: - - > DEV=/dev/your_sd_device - > dd if=fip/u-boot.bin of=$DEV conv=fsync,notrunc bs=512 seek=1 |