diff options
Diffstat (limited to 'board/atmel/sama5d2_xplained/sama5d2_xplained.c')
| -rw-r--r-- | board/atmel/sama5d2_xplained/sama5d2_xplained.c | 95 |
1 files changed, 7 insertions, 88 deletions
diff --git a/board/atmel/sama5d2_xplained/sama5d2_xplained.c b/board/atmel/sama5d2_xplained/sama5d2_xplained.c index 5758653030..778142ac71 100644 --- a/board/atmel/sama5d2_xplained/sama5d2_xplained.c +++ b/board/atmel/sama5d2_xplained/sama5d2_xplained.c @@ -6,10 +6,7 @@ */ #include <common.h> -#include <atmel_hlcdc.h> #include <debug_uart.h> -#include <lcd.h> -#include <version.h> #include <asm/io.h> #include <asm/arch/at91_common.h> #include <asm/arch/atmel_pio4.h> @@ -26,90 +23,15 @@ static void board_usb_hw_init(void) atmel_pio4_set_pio_output(AT91_PIO_PORTB, 10, 1); } -#ifdef CONFIG_LCD -vidinfo_t panel_info = { - .vl_col = 480, - .vl_row = 272, - .vl_clk = 9000000, - .vl_bpix = LCD_BPP, - .vl_tft = 1, - .vl_hsync_len = 41, - .vl_left_margin = 2, - .vl_right_margin = 2, - .vl_vsync_len = 11, - .vl_upper_margin = 2, - .vl_lower_margin = 2, - .mmio = ATMEL_BASE_LCDC, -}; - -/* No power up/down pin for the LCD pannel */ -void lcd_enable(void) { /* Empty! */ } -void lcd_disable(void) { /* Empty! */ } - -unsigned int has_lcdc(void) +#ifdef CONFIG_BOARD_LATE_INIT +int board_late_init(void) { - return 1; -} - -static void board_lcd_hw_init(void) -{ - atmel_pio4_set_a_periph(AT91_PIO_PORTC, 28, 0); /* LCDPWM */ - atmel_pio4_set_a_periph(AT91_PIO_PORTC, 29, 0); /* LCDDISP */ - atmel_pio4_set_a_periph(AT91_PIO_PORTC, 30, 0); /* LCDVSYNC */ - atmel_pio4_set_a_periph(AT91_PIO_PORTC, 31, 0); /* LCDHSYNC */ - atmel_pio4_set_a_periph(AT91_PIO_PORTD, 0, 0); /* LCDPCK */ - atmel_pio4_set_a_periph(AT91_PIO_PORTD, 1, 0); /* LCDDEN */ - - /* LCDDAT0 */ - /* LCDDAT1 */ - atmel_pio4_set_a_periph(AT91_PIO_PORTC, 10, 0); /* LCDDAT2 */ - atmel_pio4_set_a_periph(AT91_PIO_PORTC, 11, 0); /* LCDDAT3 */ - atmel_pio4_set_a_periph(AT91_PIO_PORTC, 12, 0); /* LCDDAT4 */ - atmel_pio4_set_a_periph(AT91_PIO_PORTC, 13, 0); /* LCDDAT5 */ - atmel_pio4_set_a_periph(AT91_PIO_PORTC, 14, 0); /* LCDDAT6 */ - atmel_pio4_set_a_periph(AT91_PIO_PORTC, 15, 0); /* LCDDAT7 */ - - /* LCDDAT8 */ - /* LCDDAT9 */ - atmel_pio4_set_a_periph(AT91_PIO_PORTC, 16, 0); /* LCDDAT10 */ - atmel_pio4_set_a_periph(AT91_PIO_PORTC, 17, 0); /* LCDDAT11 */ - atmel_pio4_set_a_periph(AT91_PIO_PORTC, 18, 0); /* LCDDAT12 */ - atmel_pio4_set_a_periph(AT91_PIO_PORTC, 19, 0); /* LCDDAT13 */ - atmel_pio4_set_a_periph(AT91_PIO_PORTC, 20, 0); /* LCDDAT14 */ - atmel_pio4_set_a_periph(AT91_PIO_PORTC, 21, 0); /* LCDDAT15 */ - - /* LCDD16 */ - /* LCDD17 */ - atmel_pio4_set_a_periph(AT91_PIO_PORTC, 22, 0); /* LCDDAT18 */ - atmel_pio4_set_a_periph(AT91_PIO_PORTC, 23, 0); /* LCDDAT19 */ - atmel_pio4_set_a_periph(AT91_PIO_PORTC, 24, 0); /* LCDDAT20 */ - atmel_pio4_set_a_periph(AT91_PIO_PORTC, 25, 0); /* LCDDAT21 */ - atmel_pio4_set_a_periph(AT91_PIO_PORTC, 26, 0); /* LCDDAT22 */ - atmel_pio4_set_a_periph(AT91_PIO_PORTC, 27, 0); /* LCDDAT23 */ - - at91_periph_clk_enable(ATMEL_ID_LCDC); -} - -#ifdef CONFIG_LCD_INFO -void lcd_show_board_info(void) -{ - ulong dram_size; - int i; - char temp[32]; - - lcd_printf("%s\n", U_BOOT_VERSION); - lcd_printf("2015 ATMEL Corp\n"); - lcd_printf("%s CPU at %s MHz\n", get_cpu_name(), - strmhz(temp, get_cpu_clk_rate())); - - dram_size = 0; - for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) - dram_size += gd->bd->bi_dram[i].size; - - lcd_printf("%ld MB SDRAM\n", dram_size >> 20); +#ifdef CONFIG_DM_VIDEO + at91_video_show_board_info(); +#endif + return 0; } -#endif /* CONFIG_LCD_INFO */ -#endif /* CONFIG_LCD */ +#endif #ifdef CONFIG_DEBUG_UART_BOARD_INIT static void board_uart1_hw_init(void) @@ -142,9 +64,6 @@ int board_init(void) /* address of boot parameters */ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; -#ifdef CONFIG_LCD - board_lcd_hw_init(); -#endif #ifdef CONFIG_CMD_USB board_usb_hw_init(); #endif |