diff options
Diffstat (limited to 'board/atmel')
| -rw-r--r-- | board/atmel/at91sam9x5ek/at91sam9x5ek.c | 111 | ||||
| -rw-r--r-- | board/atmel/common/video_display.c | 2 | ||||
| -rw-r--r-- | board/atmel/sama5d2_xplained/sama5d2_xplained.c | 95 | ||||
| -rw-r--r-- | board/atmel/sama5d3xek/sama5d3xek.c | 83 | ||||
| -rw-r--r-- | board/atmel/sama5d4_xplained/sama5d4_xplained.c | 102 | ||||
| -rw-r--r-- | board/atmel/sama5d4ek/sama5d4ek.c | 97 |
6 files changed, 30 insertions, 460 deletions
diff --git a/board/atmel/at91sam9x5ek/at91sam9x5ek.c b/board/atmel/at91sam9x5ek/at91sam9x5ek.c index be6dd4a6d3..d69831ad15 100644 --- a/board/atmel/at91sam9x5ek/at91sam9x5ek.c +++ b/board/atmel/at91sam9x5ek/at91sam9x5ek.c @@ -13,12 +13,6 @@ #include <asm/arch/clk.h> #include <asm/arch/gpio.h> #include <debug_uart.h> -#include <lcd.h> -#include <atmel_hlcdc.h> -#ifdef CONFIG_LCD_INFO -#include <nand.h> -#include <version.h> -#endif #include <asm/mach-types.h> DECLARE_GLOBAL_DATA_PTR; @@ -86,103 +80,15 @@ static void at91sam9x5ek_nand_hw_init(void) } #endif -#ifdef CONFIG_LCD -vidinfo_t panel_info = { - .vl_col = 800, - .vl_row = 480, - .vl_clk = 24000000, - .vl_sync = LCDC_LCDCFG5_HSPOL | LCDC_LCDCFG5_VSPOL, - .vl_bpix = LCD_BPP, - .vl_tft = 1, - .vl_clk_pol = 1, - .vl_hsync_len = 128, - .vl_left_margin = 64, - .vl_right_margin = 64, - .vl_vsync_len = 2, - .vl_upper_margin = 22, - .vl_lower_margin = 21, - .mmio = ATMEL_BASE_LCDC, -}; - -void lcd_enable(void) -{ - if (has_lcdc()) - at91_pio3_set_a_periph(AT91_PIO_PORTC, 29, 1); /* power up */ -} - -void lcd_disable(void) -{ - if (has_lcdc()) - at91_pio3_set_a_periph(AT91_PIO_PORTC, 29, 0); /* power down */ -} - -static void at91sam9x5ek_lcd_hw_init(void) -{ - if (has_lcdc()) { - at91_pio3_set_a_periph(AT91_PIO_PORTC, 26, 0); /* LCDPWM */ - at91_pio3_set_a_periph(AT91_PIO_PORTC, 27, 0); /* LCDVSYNC */ - at91_pio3_set_a_periph(AT91_PIO_PORTC, 28, 0); /* LCDHSYNC */ - at91_pio3_set_a_periph(AT91_PIO_PORTC, 24, 0); /* LCDDISP */ - at91_pio3_set_a_periph(AT91_PIO_PORTC, 29, 0); /* LCDDEN */ - at91_pio3_set_a_periph(AT91_PIO_PORTC, 30, 0); /* LCDPCK */ - - at91_pio3_set_a_periph(AT91_PIO_PORTC, 0, 0); /* LCDD0 */ - at91_pio3_set_a_periph(AT91_PIO_PORTC, 1, 0); /* LCDD1 */ - at91_pio3_set_a_periph(AT91_PIO_PORTC, 2, 0); /* LCDD2 */ - at91_pio3_set_a_periph(AT91_PIO_PORTC, 3, 0); /* LCDD3 */ - at91_pio3_set_a_periph(AT91_PIO_PORTC, 4, 0); /* LCDD4 */ - at91_pio3_set_a_periph(AT91_PIO_PORTC, 5, 0); /* LCDD5 */ - at91_pio3_set_a_periph(AT91_PIO_PORTC, 6, 0); /* LCDD6 */ - at91_pio3_set_a_periph(AT91_PIO_PORTC, 7, 0); /* LCDD7 */ - at91_pio3_set_a_periph(AT91_PIO_PORTC, 8, 0); /* LCDD8 */ - at91_pio3_set_a_periph(AT91_PIO_PORTC, 9, 0); /* LCDD9 */ - at91_pio3_set_a_periph(AT91_PIO_PORTC, 10, 0); /* LCDD10 */ - at91_pio3_set_a_periph(AT91_PIO_PORTC, 11, 0); /* LCDD11 */ - at91_pio3_set_a_periph(AT91_PIO_PORTC, 12, 0); /* LCDD12 */ - at91_pio3_set_a_periph(AT91_PIO_PORTC, 13, 0); /* LCDD13 */ - at91_pio3_set_a_periph(AT91_PIO_PORTC, 14, 0); /* LCDD14 */ - at91_pio3_set_a_periph(AT91_PIO_PORTC, 15, 0); /* LCDD15 */ - at91_pio3_set_a_periph(AT91_PIO_PORTC, 16, 0); /* LCDD16 */ - at91_pio3_set_a_periph(AT91_PIO_PORTC, 17, 0); /* LCDD17 */ - at91_pio3_set_a_periph(AT91_PIO_PORTC, 18, 0); /* LCDD18 */ - at91_pio3_set_a_periph(AT91_PIO_PORTC, 19, 0); /* LCDD19 */ - at91_pio3_set_a_periph(AT91_PIO_PORTC, 20, 0); /* LCDD20 */ - at91_pio3_set_a_periph(AT91_PIO_PORTC, 21, 0); /* LCDD21 */ - at91_pio3_set_a_periph(AT91_PIO_PORTC, 22, 0); /* LCDD22 */ - at91_pio3_set_a_periph(AT91_PIO_PORTC, 23, 0); /* LCDD23 */ - - at91_periph_clk_enable(ATMEL_ID_LCDC); - } -} - -#ifdef CONFIG_LCD_INFO -void lcd_show_board_info(void) +#ifdef CONFIG_BOARD_LATE_INIT +int board_late_init(void) { - ulong dram_size, nand_size; - int i; - char temp[32]; - - if (has_lcdc()) { - lcd_printf("%s\n", U_BOOT_VERSION); - lcd_printf("(C) 2012 ATMEL Corp\n"); - lcd_printf("at91support@atmel.com\n"); - lcd_printf("%s CPU at %s MHz\n", - get_cpu_name(), - strmhz(temp, get_cpu_clk_rate())); - - dram_size = 0; - for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) - dram_size += gd->bd->bi_dram[i].size; - nand_size = 0; - for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++) - nand_size += get_nand_dev_by_index(i)->size; - lcd_printf(" %ld MB SDRAM, %ld MB NAND\n", - dram_size >> 20, - nand_size >> 20); - } +#ifdef CONFIG_DM_VIDEO + at91_video_show_board_info(); +#endif + return 0; } -#endif /* CONFIG_LCD_INFO */ -#endif /* CONFIG_LCD */ +#endif #ifdef CONFIG_DEBUG_UART_BOARD_INIT void board_debug_uart_init(void) @@ -216,9 +122,6 @@ int board_init(void) #if defined(CONFIG_USB_OHCI_NEW) || defined(CONFIG_USB_EHCI_HCD) at91_uhp_hw_init(); #endif -#ifdef CONFIG_LCD - at91sam9x5ek_lcd_hw_init(); -#endif return 0; } diff --git a/board/atmel/common/video_display.c b/board/atmel/common/video_display.c index 39ad619819..b20abc7386 100644 --- a/board/atmel/common/video_display.c +++ b/board/atmel/common/video_display.c @@ -43,7 +43,7 @@ int at91_video_show_board_info(void) nand_size = 0; #ifdef CONFIG_NAND_ATMEL for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++) - nand_size += nand_info[i]->size; + nand_size += get_nand_dev_by_index(i)->size; #endif len += sprintf(&buf[len], "%ld MB SDRAM, %ld MB NAND\n", diff --git a/board/atmel/sama5d2_xplained/sama5d2_xplained.c b/board/atmel/sama5d2_xplained/sama5d2_xplained.c index 5758653030..778142ac71 100644 --- a/board/atmel/sama5d2_xplained/sama5d2_xplained.c +++ b/board/atmel/sama5d2_xplained/sama5d2_xplained.c @@ -6,10 +6,7 @@ */ #include <common.h> -#include <atmel_hlcdc.h> #include <debug_uart.h> -#include <lcd.h> -#include <version.h> #include <asm/io.h> #include <asm/arch/at91_common.h> #include <asm/arch/atmel_pio4.h> @@ -26,90 +23,15 @@ static void board_usb_hw_init(void) atmel_pio4_set_pio_output(AT91_PIO_PORTB, 10, 1); } -#ifdef CONFIG_LCD -vidinfo_t panel_info = { - .vl_col = 480, - .vl_row = 272, - .vl_clk = 9000000, - .vl_bpix = LCD_BPP, - .vl_tft = 1, - .vl_hsync_len = 41, - .vl_left_margin = 2, - .vl_right_margin = 2, - .vl_vsync_len = 11, - .vl_upper_margin = 2, - .vl_lower_margin = 2, - .mmio = ATMEL_BASE_LCDC, -}; - -/* No power up/down pin for the LCD pannel */ -void lcd_enable(void) { /* Empty! */ } -void lcd_disable(void) { /* Empty! */ } - -unsigned int has_lcdc(void) +#ifdef CONFIG_BOARD_LATE_INIT +int board_late_init(void) { - return 1; -} - -static void board_lcd_hw_init(void) -{ - atmel_pio4_set_a_periph(AT91_PIO_PORTC, 28, 0); /* LCDPWM */ - atmel_pio4_set_a_periph(AT91_PIO_PORTC, 29, 0); /* LCDDISP */ - atmel_pio4_set_a_periph(AT91_PIO_PORTC, 30, 0); /* LCDVSYNC */ - atmel_pio4_set_a_periph(AT91_PIO_PORTC, 31, 0); /* LCDHSYNC */ - atmel_pio4_set_a_periph(AT91_PIO_PORTD, 0, 0); /* LCDPCK */ - atmel_pio4_set_a_periph(AT91_PIO_PORTD, 1, 0); /* LCDDEN */ - - /* LCDDAT0 */ - /* LCDDAT1 */ - atmel_pio4_set_a_periph(AT91_PIO_PORTC, 10, 0); /* LCDDAT2 */ - atmel_pio4_set_a_periph(AT91_PIO_PORTC, 11, 0); /* LCDDAT3 */ - atmel_pio4_set_a_periph(AT91_PIO_PORTC, 12, 0); /* LCDDAT4 */ - atmel_pio4_set_a_periph(AT91_PIO_PORTC, 13, 0); /* LCDDAT5 */ - atmel_pio4_set_a_periph(AT91_PIO_PORTC, 14, 0); /* LCDDAT6 */ - atmel_pio4_set_a_periph(AT91_PIO_PORTC, 15, 0); /* LCDDAT7 */ - - /* LCDDAT8 */ - /* LCDDAT9 */ - atmel_pio4_set_a_periph(AT91_PIO_PORTC, 16, 0); /* LCDDAT10 */ - atmel_pio4_set_a_periph(AT91_PIO_PORTC, 17, 0); /* LCDDAT11 */ - atmel_pio4_set_a_periph(AT91_PIO_PORTC, 18, 0); /* LCDDAT12 */ - atmel_pio4_set_a_periph(AT91_PIO_PORTC, 19, 0); /* LCDDAT13 */ - atmel_pio4_set_a_periph(AT91_PIO_PORTC, 20, 0); /* LCDDAT14 */ - atmel_pio4_set_a_periph(AT91_PIO_PORTC, 21, 0); /* LCDDAT15 */ - - /* LCDD16 */ - /* LCDD17 */ - atmel_pio4_set_a_periph(AT91_PIO_PORTC, 22, 0); /* LCDDAT18 */ - atmel_pio4_set_a_periph(AT91_PIO_PORTC, 23, 0); /* LCDDAT19 */ - atmel_pio4_set_a_periph(AT91_PIO_PORTC, 24, 0); /* LCDDAT20 */ - atmel_pio4_set_a_periph(AT91_PIO_PORTC, 25, 0); /* LCDDAT21 */ - atmel_pio4_set_a_periph(AT91_PIO_PORTC, 26, 0); /* LCDDAT22 */ - atmel_pio4_set_a_periph(AT91_PIO_PORTC, 27, 0); /* LCDDAT23 */ - - at91_periph_clk_enable(ATMEL_ID_LCDC); -} - -#ifdef CONFIG_LCD_INFO -void lcd_show_board_info(void) -{ - ulong dram_size; - int i; - char temp[32]; - - lcd_printf("%s\n", U_BOOT_VERSION); - lcd_printf("2015 ATMEL Corp\n"); - lcd_printf("%s CPU at %s MHz\n", get_cpu_name(), - strmhz(temp, get_cpu_clk_rate())); - - dram_size = 0; - for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) - dram_size += gd->bd->bi_dram[i].size; - - lcd_printf("%ld MB SDRAM\n", dram_size >> 20); +#ifdef CONFIG_DM_VIDEO + at91_video_show_board_info(); +#endif + return 0; } -#endif /* CONFIG_LCD_INFO */ -#endif /* CONFIG_LCD */ +#endif #ifdef CONFIG_DEBUG_UART_BOARD_INIT static void board_uart1_hw_init(void) @@ -142,9 +64,6 @@ int board_init(void) /* address of boot parameters */ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; -#ifdef CONFIG_LCD - board_lcd_hw_init(); -#endif #ifdef CONFIG_CMD_USB board_usb_hw_init(); #endif diff --git a/board/atmel/sama5d3xek/sama5d3xek.c b/board/atmel/sama5d3xek/sama5d3xek.c index 6d473fc06d..98d846fd79 100644 --- a/board/atmel/sama5d3xek/sama5d3xek.c +++ b/board/atmel/sama5d3xek/sama5d3xek.c @@ -13,9 +13,7 @@ #include <asm/arch/gpio.h> #include <asm/arch/clk.h> #include <debug_uart.h> -#include <lcd.h> #include <linux/ctype.h> -#include <atmel_hlcdc.h> #include <phy.h> #include <micrel.h> #include <spl.h> @@ -132,80 +130,6 @@ static void sama5d3xek_mci_hw_init(void) } #endif -#ifdef CONFIG_LCD -vidinfo_t panel_info = { - .vl_col = 800, - .vl_row = 480, - .vl_clk = 24000000, - .vl_bpix = LCD_BPP, - .vl_tft = 1, - .vl_hsync_len = 128, - .vl_left_margin = 64, - .vl_right_margin = 64, - .vl_vsync_len = 2, - .vl_upper_margin = 22, - .vl_lower_margin = 21, - .mmio = ATMEL_BASE_LCDC, -}; - -void lcd_enable(void) -{ -} - -void lcd_disable(void) -{ -} - -static void sama5d3xek_lcd_hw_init(void) -{ - gd->fb_base = CONFIG_SAMA5D3_LCD_BASE; - - /* The higher 8 bit of LCD is board related */ - at91_pio3_set_c_periph(AT91_PIO_PORTC, 14, 0); /* LCDD16 */ - at91_pio3_set_c_periph(AT91_PIO_PORTC, 13, 0); /* LCDD17 */ - at91_pio3_set_c_periph(AT91_PIO_PORTC, 12, 0); /* LCDD18 */ - at91_pio3_set_c_periph(AT91_PIO_PORTC, 11, 0); /* LCDD19 */ - at91_pio3_set_c_periph(AT91_PIO_PORTC, 10, 0); /* LCDD20 */ - at91_pio3_set_c_periph(AT91_PIO_PORTC, 15, 0); /* LCDD21 */ - at91_pio3_set_c_periph(AT91_PIO_PORTE, 27, 0); /* LCDD22 */ - at91_pio3_set_c_periph(AT91_PIO_PORTE, 28, 0); /* LCDD23 */ - - /* Configure lower 16 bit of LCD and enable clock */ - at91_lcd_hw_init(); -} - -#ifdef CONFIG_LCD_INFO -#include <nand.h> -#include <version.h> - -void lcd_show_board_info(void) -{ - ulong dram_size; - uint64_t nand_size; - int i; - char temp[32]; - - lcd_printf("%s\n", U_BOOT_VERSION); - lcd_printf("(C) 2013 ATMEL Corp\n"); - lcd_printf("at91@atmel.com\n"); - lcd_printf("%s CPU at %s MHz\n", get_cpu_name(), - strmhz(temp, get_cpu_clk_rate())); - - dram_size = 0; - for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) - dram_size += gd->bd->bi_dram[i].size; - - nand_size = 0; -#ifdef CONFIG_NAND_ATMEL - for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++) - nand_size += get_nand_dev_by_index(i)->size; -#endif - lcd_printf("%ld MB SDRAM, %lld MB NAND\n", - dram_size >> 20, nand_size >> 20); -} -#endif /* CONFIG_LCD_INFO */ -#endif /* CONFIG_LCD */ - #ifdef CONFIG_DEBUG_UART_BOARD_INIT void board_debug_uart_init(void) { @@ -240,10 +164,6 @@ int board_init(void) #ifdef CONFIG_GENERIC_ATMEL_MCI sama5d3xek_mci_hw_init(); #endif -#ifdef CONFIG_LCD - if (has_lcdc()) - sama5d3xek_lcd_hw_init(); -#endif return 0; } @@ -269,6 +189,9 @@ int board_late_init(void) strcat(name, "ek.dtb"); env_set("dtb_name", name); #endif +#ifdef CONFIG_DM_VIDEO + at91_video_show_board_info(); +#endif return 0; } #endif diff --git a/board/atmel/sama5d4_xplained/sama5d4_xplained.c b/board/atmel/sama5d4_xplained/sama5d4_xplained.c index 9236a28549..78eddb8beb 100644 --- a/board/atmel/sama5d4_xplained/sama5d4_xplained.c +++ b/board/atmel/sama5d4_xplained/sama5d4_xplained.c @@ -14,11 +14,7 @@ #include <asm/arch/clk.h> #include <asm/arch/sama5d3_smc.h> #include <asm/arch/sama5d4.h> -#include <atmel_hlcdc.h> #include <debug_uart.h> -#include <lcd.h> -#include <nand.h> -#include <version.h> DECLARE_GLOBAL_DATA_PTR; @@ -73,98 +69,15 @@ static void sama5d4_xplained_usb_hw_init(void) } #endif -#ifdef CONFIG_LCD -vidinfo_t panel_info = { - .vl_col = 480, - .vl_row = 272, - .vl_clk = 9000000, - .vl_bpix = LCD_BPP, - .vl_tft = 1, - .vl_hsync_len = 41, - .vl_left_margin = 2, - .vl_right_margin = 2, - .vl_vsync_len = 11, - .vl_upper_margin = 2, - .vl_lower_margin = 2, - .mmio = ATMEL_BASE_LCDC, -}; - -/* No power up/down pin for the LCD pannel */ -void lcd_enable(void) { /* Empty! */ } -void lcd_disable(void) { /* Empty! */ } - -unsigned int has_lcdc(void) +#ifdef CONFIG_BOARD_LATE_INIT +int board_late_init(void) { - return 1; -} - -static void sama5d4_xplained_lcd_hw_init(void) -{ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 24, 0); /* LCDPWM */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 25, 0); /* LCDDISP */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 26, 0); /* LCDVSYNC */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 27, 0); /* LCDHSYNC */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 28, 0); /* LCDDOTCK */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 29, 0); /* LCDDEN */ - - at91_pio3_set_a_periph(AT91_PIO_PORTA, 0, 0); /* LCDD0 */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 1, 0); /* LCDD1 */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 2, 0); /* LCDD2 */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 3, 0); /* LCDD3 */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 4, 0); /* LCDD4 */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 5, 0); /* LCDD5 */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 6, 0); /* LCDD6 */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 7, 0); /* LCDD7 */ - - at91_pio3_set_a_periph(AT91_PIO_PORTA, 8, 0); /* LCDD9 */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 9, 0); /* LCDD8 */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 10, 0); /* LCDD10 */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 11, 0); /* LCDD11 */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 12, 0); /* LCDD12 */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 13, 0); /* LCDD13 */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 14, 0); /* LCDD14 */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 15, 0); /* LCDD15 */ - - at91_pio3_set_a_periph(AT91_PIO_PORTA, 16, 0); /* LCDD16 */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 17, 0); /* LCDD17 */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 18, 0); /* LCDD18 */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 19, 0); /* LCDD19 */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 20, 0); /* LCDD20 */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 21, 0); /* LCDD21 */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 22, 0); /* LCDD22 */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 23, 0); /* LCDD23 */ - - /* Enable clock */ - at91_periph_clk_enable(ATMEL_ID_LCDC); -} - -#ifdef CONFIG_LCD_INFO -void lcd_show_board_info(void) -{ - ulong dram_size, nand_size; - int i; - char temp[32]; - - lcd_printf("%s\n", U_BOOT_VERSION); - lcd_printf("2014 ATMEL Corp\n"); - lcd_printf("%s CPU at %s MHz\n", get_cpu_name(), - strmhz(temp, get_cpu_clk_rate())); - - dram_size = 0; - for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) - dram_size += gd->bd->bi_dram[i].size; - - nand_size = 0; -#ifdef CONFIG_NAND_ATMEL - for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++) - nand_size += get_nand_dev_by_index(i)->size; +#ifdef CONFIG_DM_VIDEO + at91_video_show_board_info(); #endif - lcd_printf("%ld MB SDRAM, %ld MB NAND\n", - dram_size >> 20, nand_size >> 20); + return 0; } -#endif /* CONFIG_LCD_INFO */ - -#endif /* CONFIG_LCD */ +#endif #ifdef CONFIG_DEBUG_UART_BOARD_INIT static void sama5d4_xplained_serial3_hw_init(void) @@ -212,9 +125,6 @@ int board_init(void) #ifdef CONFIG_NAND_ATMEL sama5d4_xplained_nand_hw_init(); #endif -#ifdef CONFIG_LCD - sama5d4_xplained_lcd_hw_init(); -#endif #ifdef CONFIG_CMD_USB sama5d4_xplained_usb_hw_init(); #endif diff --git a/board/atmel/sama5d4ek/sama5d4ek.c b/board/atmel/sama5d4ek/sama5d4ek.c index ee07038e2e..48c43f0163 100644 --- a/board/atmel/sama5d4ek/sama5d4ek.c +++ b/board/atmel/sama5d4ek/sama5d4ek.c @@ -14,11 +14,7 @@ #include <asm/arch/clk.h> #include <asm/arch/sama5d3_smc.h> #include <asm/arch/sama5d4.h> -#include <atmel_hlcdc.h> #include <debug_uart.h> -#include <lcd.h> -#include <nand.h> -#include <version.h> DECLARE_GLOBAL_DATA_PTR; @@ -74,93 +70,15 @@ static void sama5d4ek_usb_hw_init(void) } #endif -#ifdef CONFIG_LCD -vidinfo_t panel_info = { - .vl_col = 800, - .vl_row = 480, - .vl_clk = 33260000, - .vl_bpix = LCD_BPP, - .vl_tft = 1, - .vl_hsync_len = 5, - .vl_left_margin = 128, - .vl_right_margin = 0, - .vl_vsync_len = 5, - .vl_upper_margin = 23, - .vl_lower_margin = 22, - .mmio = ATMEL_BASE_LCDC, -}; - -/* No power up/down pin for the LCD pannel */ -void lcd_enable(void) { /* Empty! */ } -void lcd_disable(void) { /* Empty! */ } - -unsigned int has_lcdc(void) +#ifdef CONFIG_BOARD_LATE_INIT +int board_late_init(void) { - return 1; -} - -static void sama5d4ek_lcd_hw_init(void) -{ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 24, 0); /* LCDPWM */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 25, 0); /* LCDDISP */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 26, 0); /* LCDVSYNC */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 27, 0); /* LCDHSYNC */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 28, 0); /* LCDDOTCK */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 29, 0); /* LCDDEN */ - - at91_pio3_set_a_periph(AT91_PIO_PORTA, 2, 0); /* LCDD2 */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 3, 0); /* LCDD3 */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 4, 0); /* LCDD4 */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 5, 0); /* LCDD5 */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 6, 0); /* LCDD6 */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 7, 0); /* LCDD7 */ - - at91_pio3_set_a_periph(AT91_PIO_PORTA, 10, 0); /* LCDD10 */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 11, 0); /* LCDD11 */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 12, 0); /* LCDD12 */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 13, 0); /* LCDD13 */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 14, 0); /* LCDD14 */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 15, 0); /* LCDD15 */ - - at91_pio3_set_a_periph(AT91_PIO_PORTA, 18, 0); /* LCDD18 */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 19, 0); /* LCDD19 */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 20, 0); /* LCDD20 */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 21, 0); /* LCDD21 */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 22, 0); /* LCDD22 */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 23, 0); /* LCDD23 */ - - /* Enable clock */ - at91_periph_clk_enable(ATMEL_ID_LCDC); -} - -#ifdef CONFIG_LCD_INFO -void lcd_show_board_info(void) -{ - ulong dram_size, nand_size; - int i; - char temp[32]; - - lcd_printf("%s\n", U_BOOT_VERSION); - lcd_printf("2014 ATMEL Corp\n"); - lcd_printf("at91@atmel.com\n"); - lcd_printf("%s CPU at %s MHz\n", get_cpu_name(), - strmhz(temp, get_cpu_clk_rate())); - - dram_size = 0; - for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) - dram_size += gd->bd->bi_dram[i].size; - - nand_size = 0; -#ifdef CONFIG_NAND_ATMEL - for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++) - nand_size += get_nand_dev_by_index(i)->size; +#ifdef CONFIG_DM_VIDEO + at91_video_show_board_info(); #endif - lcd_printf("%ld MB SDRAM, %ld MB NAND\n", - dram_size >> 20, nand_size >> 20); + return 0; } -#endif /* CONFIG_LCD_INFO */ - -#endif /* CONFIG_LCD */ +#endif #ifdef CONFIG_DEBUG_UART_BOARD_INIT static void sama5d4ek_serial3_hw_init(void) @@ -196,9 +114,6 @@ int board_init(void) #ifdef CONFIG_NAND_ATMEL sama5d4ek_nand_hw_init(); #endif -#ifdef CONFIG_LCD - sama5d4ek_lcd_hw_init(); -#endif #ifdef CONFIG_CMD_USB sama5d4ek_usb_hw_init(); #endif |