summaryrefslogtreecommitdiff
path: root/board/bct-brettl2
diff options
context:
space:
mode:
Diffstat (limited to 'board/bct-brettl2')
-rw-r--r--board/bct-brettl2/Kconfig9
-rw-r--r--board/bct-brettl2/MAINTAINERS6
-rw-r--r--board/bct-brettl2/Makefile13
-rw-r--r--board/bct-brettl2/bct-brettl2.c109
-rw-r--r--board/bct-brettl2/cled.c32
-rw-r--r--board/bct-brettl2/gpio_cfi_flash.c4
-rw-r--r--board/bct-brettl2/smsc9303.c176
-rw-r--r--board/bct-brettl2/smsc9303.h9
8 files changed, 0 insertions, 358 deletions
diff --git a/board/bct-brettl2/Kconfig b/board/bct-brettl2/Kconfig
deleted file mode 100644
index 9c5407e7b2..0000000000
--- a/board/bct-brettl2/Kconfig
+++ /dev/null
@@ -1,9 +0,0 @@
-if TARGET_BCT_BRETTL2
-
-config SYS_BOARD
- default "bct-brettl2"
-
-config SYS_CONFIG_NAME
- default "bct-brettl2"
-
-endif
diff --git a/board/bct-brettl2/MAINTAINERS b/board/bct-brettl2/MAINTAINERS
deleted file mode 100644
index 32245d4bcd..0000000000
--- a/board/bct-brettl2/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-BCT-BRETTL2 BOARD
-M: Peter Meerwald <devel@bct-electronic.com>
-S: Maintained
-F: board/bct-brettl2/
-F: include/configs/bct-brettl2.h
-F: configs/bct-brettl2_defconfig
diff --git a/board/bct-brettl2/Makefile b/board/bct-brettl2/Makefile
deleted file mode 100644
index 28fccc0dcb..0000000000
--- a/board/bct-brettl2/Makefile
+++ /dev/null
@@ -1,13 +0,0 @@
-#
-# U-Boot - Makefile
-#
-# Copyright (c) 2005-2008 Analog Device Inc.
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y := bct-brettl2.o gpio_cfi_flash.o cled.o
-obj-$(CONFIG_BFIN_MAC) += smsc9303.o
diff --git a/board/bct-brettl2/bct-brettl2.c b/board/bct-brettl2/bct-brettl2.c
deleted file mode 100644
index adb8605bb9..0000000000
--- a/board/bct-brettl2/bct-brettl2.c
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
- * U-Boot - main board file for BCT brettl2
- *
- * Copyright (c) 2010 BCT Electronic GmbH
- *
- * Licensed under the GPL-2 or later.
- */
-
-#include <common.h>
-#include <config.h>
-#include <command.h>
-#include <asm/blackfin.h>
-#include <asm/portmux.h>
-#include <asm/gpio.h>
-#include <net.h>
-#include <netdev.h>
-#include <miiphy.h>
-
-#include "../cm-bf537e/gpio_cfi_flash.h"
-#include "smsc9303.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int checkboard(void)
-{
- printf("Board: bct-brettl2 board\n");
- printf(" Support: http://www.bct-electronic.com/\n");
- return 0;
-}
-
-#ifdef CONFIG_BFIN_MAC
-int board_eth_init(bd_t *bis)
-{
- int retry = 3;
- int ret;
-
- ret = bfin_EMAC_initialize(bis);
-
- uchar enetaddr[6];
- if (eth_getenv_enetaddr("ethaddr", enetaddr)) {
- printf("setting MAC %pM\n", enetaddr);
- }
- puts(" ");
-
- puts("initialize SMSC LAN9303i ethernet switch\n");
-
- while (retry-- > 0) {
- if (init_smsc9303i_mii())
- return ret;
- }
-
- return ret;
-}
-#endif
-
-static void init_tlv320aic31(void)
-{
- puts("Audio: setup TIMER0 to enable 16.384 MHz clock for tlv320aic31\n");
- peripheral_request(P_TMR0, "tlv320aic31 clock");
- bfin_write_TIMER0_CONFIG(0x020d);
- bfin_write_TIMER0_PERIOD(0x0008);
- bfin_write_TIMER0_WIDTH(0x0008/2);
- bfin_write_TIMER_ENABLE(bfin_read_TIMER_ENABLE() | 1);
- SSYNC();
- udelay(10000);
-
- puts(" resetting tlv320aic31\n");
-
- gpio_request(GPIO_PF2, "tlv320aic31");
- gpio_direction_output(GPIO_PF2, 0);
- udelay(10000);
- gpio_direction_output(GPIO_PF2, 1);
- udelay(10000);
- gpio_free(GPIO_PF2);
-}
-
-static void init_mute_pin(void)
-{
- printf(" unmute class D amplifier\n");
-
- gpio_request(GPIO_PF5, "mute");
- gpio_direction_output(GPIO_PF5, 1);
- gpio_free(GPIO_PF5);
-}
-
-/* sometimes LEDs (speech, status) are still on after reboot, turn 'em off */
-static void turn_leds_off(void)
-{
- printf(" turn LEDs off\n");
-
- gpio_request(GPIO_PF6, "led");
- gpio_direction_output(GPIO_PF6, 0);
- gpio_free(GPIO_PF6);
-
- gpio_request(GPIO_PF15, "led");
- gpio_direction_output(GPIO_PF15, 0);
- gpio_free(GPIO_PF15);
-}
-
-/* miscellaneous platform dependent initialisations */
-int misc_init_r(void)
-{
- gpio_cfi_flash_init();
- init_tlv320aic31();
- init_mute_pin();
- turn_leds_off();
-
- return 0;
-}
diff --git a/board/bct-brettl2/cled.c b/board/bct-brettl2/cled.c
deleted file mode 100644
index dcb91bdffa..0000000000
--- a/board/bct-brettl2/cled.c
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * cled.c - control color led
- *
- * Copyright (c) 2010 BCT Electronic GmbH
- *
- * Licensed under the GPL-2 or later.
- */
-
-#include <common.h>
-#include <command.h>
-#include <asm/blackfin.h>
-#include <asm/io.h>
-
-int do_cled(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
- ulong addr = 0x20000000 + 0x200000; /* AMS2 */
- uchar data;
-
- if (argc < 2)
- return cmd_usage(cmdtp);
-
- data = simple_strtoul(argv[1], NULL, 10);
- outb(data, addr);
-
- printf("cled, write %02x\n", data);
-
- return 0;
-}
-
-U_BOOT_CMD(cled, 2, 0, do_cled,
- "set/clear color LED",
- "");
diff --git a/board/bct-brettl2/gpio_cfi_flash.c b/board/bct-brettl2/gpio_cfi_flash.c
deleted file mode 100644
index b385c7fc0e..0000000000
--- a/board/bct-brettl2/gpio_cfi_flash.c
+++ /dev/null
@@ -1,4 +0,0 @@
-#define GPIO_PIN_1 GPIO_PG5
-#define GPIO_PIN_2 GPIO_PG6
-#define GPIO_PIN_3 GPIO_PG7
-#include "../cm-bf537e/gpio_cfi_flash.c"
diff --git a/board/bct-brettl2/smsc9303.c b/board/bct-brettl2/smsc9303.c
deleted file mode 100644
index 15eea7a484..0000000000
--- a/board/bct-brettl2/smsc9303.c
+++ /dev/null
@@ -1,176 +0,0 @@
-/*
- * smsc9303.c - routines to initialize SMSC 9303 switch
- *
- * Copyright (c) 2010 BCT Electronic GmbH
- *
- * Licensed under the GPL-2 or later.
- */
-
-#include <common.h>
-#include <config.h>
-#include <miiphy.h>
-
-#include <asm/blackfin.h>
-#include <asm/gpio.h>
-
-static int smc9303i_write_mii(unsigned char addr, unsigned char reg, unsigned short data)
-{
- const char *devname = miiphy_get_current_dev();
-
- if (!devname)
- return 0;
-
- if (miiphy_write(devname, addr, reg, data) != 0)
- return 0;
-
- return 1;
-}
-
-static int smc9303i_write_reg(unsigned short reg, unsigned int data)
-{
- const char *devname = miiphy_get_current_dev();
- unsigned char mii_addr = 0x10 | (reg >> 6);
- unsigned char mii_reg = (reg & 0x3c) >> 1;
-
- if (!devname)
- return 0;
-
- if (miiphy_write(devname, mii_addr, mii_reg|0, data & 0xffff) != 0)
- return 0;
-
- if (miiphy_write(devname, mii_addr, mii_reg|1, data >> 16) != 0)
- return 0;
-
- return 1;
-}
-
-static int smc9303i_read_reg(unsigned short reg, unsigned int *data)
-{
- const char *devname = miiphy_get_current_dev();
- unsigned char mii_addr = 0x10 | (reg >> 6);
- unsigned char mii_reg = (reg & 0x3c) >> 1;
- unsigned short tmp1, tmp2;
-
- if (!devname)
- return 0;
-
- if (miiphy_read(devname, mii_addr, mii_reg|0, &tmp1) != 0)
- return 0;
-
- if (miiphy_read(devname, mii_addr, mii_reg|1, &tmp2) != 0)
- return 0;
-
- *data = (tmp2 << 16) | tmp1;
-
- return 1;
-}
-
-#if 0
-static int smc9303i_read_mii(unsigned char addr, unsigned char reg, unsigned short *data)
-{
- const char *devname = miiphy_get_current_dev();
-
- if (!devname)
- return 0;
-
- if (miiphy_read(devname, addr, reg, data) != 0)
- return 0;
-
- return 1;
-}
-#endif
-
-typedef struct {
- unsigned short reg;
- unsigned int value;
-} smsc9303i_config_entry1_t;
-
-static const smsc9303i_config_entry1_t smsc9303i_config_table1[] =
-{
- {0x1a0, 0x00000006}, /* Port 1 Manual Flow Control Register */
- {0x1a4, 0x00000006}, /* Port 2 Manual Flow Control Register */
- {0x1a8, 0x00000006}, /* Port 0 Manual Flow Control Register */
-};
-
-typedef struct
-{
- unsigned char addr;
- unsigned char reg;
- unsigned short value;
-} smsc9303i_config_entry2_t;
-
-static const smsc9303i_config_entry2_t smsc9303i_config_table2[] =
-{
- {0x01, 0x00, 0x0100}, /* Port0 PHY Basic Control Register */
- {0x02, 0x00, 0x1100}, /* Port1 PHY Basic Control Register */
- {0x03, 0x00, 0x1100}, /* Port2 PHY Basic Control Register */
-
- {0x01, 0x04, 0x0001}, /* Port0 PHY Auto-Negotiation Advertisement Register */
- {0x02, 0x04, 0x2de1}, /* Port1 PHY Auto-Negotiation Advertisement Register */
- {0x03, 0x04, 0x2de1}, /* Port2 PHY Auto-Negotiation Advertisement Register */
-
- {0x01, 0x11, 0x0000}, /* Port0 PHY Mode Control/Status Register */
- {0x02, 0x11, 0x0000}, /* Port1 PHY Mode Control/Status Register */
- {0x03, 0x11, 0x0000}, /* Port2 PHY Mode Control/Status Register */
-
- {0x01, 0x12, 0x0021}, /* Port0 PHY Special Modes Register */
- {0x02, 0x12, 0x00e2}, /* Port1 PHY Special Modes Register */
- {0x03, 0x12, 0x00e3}, /* Port2 PHY Special Modes Register */
- {0x01, 0x1b, 0x0000}, /* Port0 PHY Special Control/Status Indication Register */
- {0x02, 0x1b, 0x0000}, /* Port1 PHY Special Control/Status Indication Register */
- {0x03, 0x1b, 0x0000}, /* Port2 PHY Special Control/Status Indication Register */
- {0x01, 0x1e, 0x0000}, /* Port0 PHY Interrupt Source Flags Register */
- {0x02, 0x1e, 0x0000}, /* Port1 PHY Interrupt Source Flags Register */
- {0x03, 0x1e, 0x0000}, /* Port2 PHY Interrupt Source Flags Register */
-};
-
-int init_smsc9303i_mii(void)
-{
- unsigned int data;
- unsigned int i;
-
- printf(" reset SMSC LAN9303i\n");
-
- gpio_request(GPIO_PG10, "smsc9303");
- gpio_direction_output(GPIO_PG10, 0);
- udelay(10000);
- gpio_direction_output(GPIO_PG10, 1);
- udelay(10000);
-
- gpio_free(GPIO_PG10);
-
-#if defined(CONFIG_MII_INIT)
- mii_init();
-#endif
-
- printf(" write SMSC LAN9303i configuration\n");
-
- if (!smc9303i_read_reg(0x50, &data))
- return 0;
-
- if ((data >> 16) != 0x9303) {
- /* chip id not found */
- printf(" error identifying SMSC LAN9303i\n");
- return 0;
- }
-
- for (i = 0; i < ARRAY_SIZE(smsc9303i_config_table1); i++) {
- const smsc9303i_config_entry1_t *entry = &smsc9303i_config_table1[i];
-
- if (!smc9303i_write_reg(entry->reg, entry->value)) {
- printf(" error writing SMSC LAN9303i configuration\n");
- return 0;
- }
- }
-
- for (i = 0; i < ARRAY_SIZE(smsc9303i_config_table2); i++) {
- const smsc9303i_config_entry2_t *entry = &smsc9303i_config_table2[i];
-
- if (!smc9303i_write_mii(entry->addr, entry->reg, entry->value)) {
- printf(" error writing SMSC LAN9303i configuration\n");
- return 0;
- }
- }
-
- return 1;
-}
diff --git a/board/bct-brettl2/smsc9303.h b/board/bct-brettl2/smsc9303.h
deleted file mode 100644
index a4ba40ef73..0000000000
--- a/board/bct-brettl2/smsc9303.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * smsc9303.h - routines to initialize SMSC 9303 switch
- *
- * Copyright (c) 2010 BCT Electronic GmbH
- *
- * Licensed under the GPL-2 or later.
- */
-
-int init_smsc9303i_mii(void);
generated by cgit (git 2.34.1) at 2024-12-29 06:18:08 +0000