diff options
Diffstat (limited to 'board/evb64260/i2c.c')
| -rw-r--r-- | board/evb64260/i2c.c | 65 |
1 files changed, 30 insertions, 35 deletions
diff --git a/board/evb64260/i2c.c b/board/evb64260/i2c.c index 88d0dac469..8119fced48 100644 --- a/board/evb64260/i2c.c +++ b/board/evb64260/i2c.c @@ -20,29 +20,25 @@ static void i2c_init(int speed, int slaveaddr) { unsigned int n, m, freq, margin, power; - unsigned int actualFreq, actualN=0, actualM=0; + unsigned int actualn = 0, actualm = 0; unsigned int control, status; - unsigned int minMargin = 0xffffffff; + unsigned int minmargin = 0xffffffff; unsigned int tclk = 125000000; DP(puts("i2c_init\n")); - for(n = 0 ; n < 8 ; n++) - { - for(m = 0 ; m < 16 ; m++) - { - power = 2<<n; /* power = 2^(n+1) */ - freq = tclk/(10*(m+1)*power); + for (n = 0 ; n < 8 ; n++) { + for (m = 0 ; m < 16 ; m++) { + power = 2 << n; /* power = 2^(n+1) */ + freq = tclk / (10 * (m + 1) * power); if (speed > freq) margin = speed - freq; else margin = freq - speed; - if(margin < minMargin) - { - minMargin = margin; - actualFreq = freq; - actualN = n; - actualM = m; + if (margin < minmargin) { + minmargin = margin; + actualn = n; + actualm = m; } } } @@ -59,7 +55,7 @@ i2c_init(int speed, int slaveaddr) DP(puts("set baudrate\n")); - GT_REG_WRITE(I2C_STATUS_BAUDE_RATE, (actualM << 3) | actualN); + GT_REG_WRITE(I2C_STATUS_BAUDE_RATE, (actualm << 3) | actualn); GT_REG_WRITE(I2C_CONTROL, (0x1 << 2) | (0x1 << 6)); udelay(I2C_DELAY * 10); @@ -91,13 +87,13 @@ i2c_start(void) udelay(I2C_DELAY); if (count > 20) { GT_REG_WRITE(I2C_CONTROL, (0x1 << 4)); /*stop*/ - return (status); + return status; } GT_REG_READ(I2C_STATUS_BAUDE_RATE, &status); count++; } - return (0); + return 0; } static uchar @@ -110,9 +106,8 @@ i2c_select_device(uchar dev_addr, uchar read, int ten_bit) /* Output slave address */ - if (ten_bit) { + if (ten_bit) bits = 10; - } data = (dev_addr << 1); /* set the read bit */ @@ -129,7 +124,7 @@ i2c_select_device(uchar dev_addr, uchar read, int ten_bit) udelay(I2C_DELAY); if (count > 20) { GT_REG_WRITE(I2C_CONTROL, (0x1 << 4)); /*stop*/ - return(status); + return status; } GT_REG_READ(I2C_STATUS_BAUDE_RATE, &status); count++; @@ -137,14 +132,14 @@ i2c_select_device(uchar dev_addr, uchar read, int ten_bit) if (bits == 10) { printf("10 bit I2C addressing not yet implemented\n"); - return (0xff); + return 0xff; } - return (0); + return 0; } static uchar -i2c_get_data(uchar* return_data, int len) { +i2c_get_data(uchar *return_data, int len) { unsigned int data, status = 0; int count = 0; @@ -163,7 +158,7 @@ i2c_get_data(uchar* return_data, int len) { count++; while ((status & 0xff) != 0x50) { udelay(I2C_DELAY); - if(count > 2) { + if (count > 2) { GT_REG_WRITE(I2C_CONTROL, (0x1 << 4)); /*stop*/ return 0; } @@ -178,16 +173,16 @@ i2c_get_data(uchar* return_data, int len) { RESET_REG_BITS(I2C_CONTROL, BIT2|BIT3); while ((status & 0xff) != 0x58) { udelay(I2C_DELAY); - if(count > 200) { + if (count > 200) { GT_REG_WRITE(I2C_CONTROL, (0x1 << 4)); /*stop*/ - return (status); + return status; } GT_REG_READ(I2C_STATUS_BAUDE_RATE, &status); count++; } GT_REG_WRITE(I2C_CONTROL, (0x1 << 4)); /* stop */ - return (0); + return 0; } static uchar @@ -213,9 +208,9 @@ i2c_write_data(unsigned int data, int len) count++; while ((status & 0xff) != 0x28) { udelay(I2C_DELAY); - if(count > 20) { + if (count > 20) { GT_REG_WRITE(I2C_CONTROL, (0x1 << 4)); /*stop*/ - return (status); + return status; } GT_REG_READ(I2C_STATUS_BAUDE_RATE, &status); count++; @@ -227,7 +222,7 @@ i2c_write_data(unsigned int data, int len) udelay(I2C_DELAY * 10); - return (0); + return 0; } static uchar @@ -254,19 +249,19 @@ i2c_set_dev_offset(uchar dev_addr, unsigned int offset, int ten_bit) return status; } - return (0); + return 0; } uchar -i2c_read(uchar dev_addr, unsigned int offset, int len, uchar* data, +i2c_read(uchar dev_addr, unsigned int offset, int len, uchar *data, int ten_bit) { uchar status = 0; - unsigned int i2cFreq = 400000; + unsigned int i2cfreq = 400000; DP(puts("i2c_read\n")); - i2c_init(i2cFreq,0); + i2c_init(i2cfreq, 0); status = i2c_start(); @@ -285,7 +280,7 @@ i2c_read(uchar dev_addr, unsigned int offset, int len, uchar* data, return status; } - i2c_init(i2cFreq,0); + i2c_init(i2cfreq, 0); status = i2c_start(); if (status) { |