diff options
Diffstat (limited to 'board/fads')
-rw-r--r-- | board/fads/fads.c | 40 | ||||
-rw-r--r-- | board/fads/fads.h | 156 | ||||
-rw-r--r-- | board/fads/flash.c | 28 |
3 files changed, 112 insertions, 112 deletions
diff --git a/board/fads/fads.c b/board/fads/fads.c index 9e601df1bc..278fa2ab2e 100644 --- a/board/fads/fads.c +++ b/board/fads/fads.c @@ -190,7 +190,7 @@ static const uint edo_70ns[] = /* ------------------------------------------------------------------------- */ static int _draminit (uint base, uint noMbytes, uint edo, uint delay) { - volatile immap_t *immap = (immap_t *) CFG_IMMR; + volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; volatile memctl8xx_t *memctl = &immap->im_memctl; /* init upm */ @@ -283,7 +283,7 @@ static int _draminit (uint base, uint noMbytes, uint edo, uint delay) static void _dramdisable(void) { - volatile immap_t *immap = (immap_t *)CFG_IMMR; + volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; volatile memctl8xx_t *memctl = &immap->im_memctl; memctl->memc_br2 = 0x00000000; @@ -423,7 +423,7 @@ static const uint sdram_table[] = static int _initsdram(uint base, uint noMbytes) { - volatile immap_t *immap = (immap_t *)CFG_IMMR; + volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; volatile memctl8xx_t *memctl = &immap->im_memctl; upmconfig(UPMB, (uint *)sdram_table,sizeof(sdram_table)/sizeof(uint)); @@ -501,7 +501,7 @@ static int _initsdram(uint base, uint noMbytes) static int _initsdram(uint base, uint noMbytes) { - volatile immap_t *immap = (immap_t *)CFG_IMMR; + volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; volatile memctl8xx_t *memctl = &immap->im_memctl; upmconfig(UPMB, (uint *)sdram_table,sizeof(sdram_table)/sizeof(uint)); @@ -564,7 +564,7 @@ static int _initsdram(uint base, uint noMbytes) static void _sdramdisable(void) { - volatile immap_t *immap = (immap_t *)CFG_IMMR; + volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; volatile memctl8xx_t *memctl = &immap->im_memctl; memctl->memc_br4 = 0x00000000; @@ -576,7 +576,7 @@ static void _sdramdisable(void) static int initsdram(uint base, uint *noMbytes) { - uint m = CFG_SDRAM_SIZE>>20; + uint m = CONFIG_SYS_SDRAM_SIZE>>20; /* _initsdram needs access to sdram */ *((uint *)BCSR1) |= BCSR1_SDRAM_EN; /* enable sdram */ @@ -688,7 +688,7 @@ int testdram (void) * Check Board Identity: */ -#if defined(CONFIG_FADS) && defined(CFG_DAUGHTERBOARD) +#if defined(CONFIG_FADS) && defined(CONFIG_SYS_DAUGHTERBOARD) static void checkdboard(void) { /* get db type from BCSR 3 */ @@ -722,7 +722,7 @@ static void checkdboard(void) default : printf("0x%x", k); } } -#endif /* defined(CONFIG_FADS) && defined(CFG_DAUGHTERBOARD) */ +#endif /* defined(CONFIG_FADS) && defined(CONFIG_SYS_DAUGHTERBOARD) */ int checkboard (void) { @@ -780,8 +780,8 @@ int checkboard (void) #if defined(CONFIG_CMD_PCMCIA) -#ifdef CFG_PCMCIA_MEM_ADDR -volatile unsigned char *pcmcia_mem = (unsigned char*)CFG_PCMCIA_MEM_ADDR; +#ifdef CONFIG_SYS_PCMCIA_MEM_ADDR +volatile unsigned char *pcmcia_mem = (unsigned char*)CONFIG_SYS_PCMCIA_MEM_ADDR; #endif int pcmcia_init(void) @@ -792,10 +792,10 @@ int pcmcia_init(void) /* ** Enable the PCMCIA for a Flash card. */ - pcmp = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia)); + pcmp = (pcmconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia)); #if 0 - pcmp->pcmc_pbr0 = CFG_PCMCIA_MEM_ADDR; + pcmp->pcmc_pbr0 = CONFIG_SYS_PCMCIA_MEM_ADDR; pcmp->pcmc_por0 = 0xc00ff05d; #endif @@ -925,25 +925,25 @@ int pcmcia_init(void) /* ========================================================================= */ -#ifdef CFG_PC_IDE_RESET +#ifdef CONFIG_SYS_PC_IDE_RESET void ide_set_reset(int on) { - volatile immap_t *immr = (immap_t *)CFG_IMMR; + volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR; /* * Configure PC for IDE Reset Pin */ if (on) { /* assert RESET */ - immr->im_ioport.iop_pcdat &= ~(CFG_PC_IDE_RESET); + immr->im_ioport.iop_pcdat &= ~(CONFIG_SYS_PC_IDE_RESET); } else { /* release RESET */ - immr->im_ioport.iop_pcdat |= CFG_PC_IDE_RESET; + immr->im_ioport.iop_pcdat |= CONFIG_SYS_PC_IDE_RESET; } /* program port pin as GPIO output */ - immr->im_ioport.iop_pcpar &= ~(CFG_PC_IDE_RESET); - immr->im_ioport.iop_pcso &= ~(CFG_PC_IDE_RESET); - immr->im_ioport.iop_pcdir |= CFG_PC_IDE_RESET; + immr->im_ioport.iop_pcpar &= ~(CONFIG_SYS_PC_IDE_RESET); + immr->im_ioport.iop_pcso &= ~(CONFIG_SYS_PC_IDE_RESET); + immr->im_ioport.iop_pcdir |= CONFIG_SYS_PC_IDE_RESET; } -#endif /* CFG_PC_IDE_RESET */ +#endif /* CONFIG_SYS_PC_IDE_RESET */ diff --git a/board/fads/fads.h b/board/fads/fads.h index 23310a4391..24e43eab3f 100644 --- a/board/fads/fads.h +++ b/board/fads/fads.h @@ -95,7 +95,7 @@ #endif #ifdef CONFIG_FEC_ENET -#define CFG_DISCOVER_PHY +#define CONFIG_SYS_DISCOVER_PHY #define CONFIG_MII_INIT 1 #endif @@ -130,24 +130,24 @@ /* * Miscellaneous configurable options */ -#define CFG_PROMPT "=>" /* Monitor Command Prompt */ -#define CFG_HUSH_PARSER -#define CFG_PROMPT_HUSH_PS2 "> " -#define CFG_LONGHELP /* #undef to save memory */ +#define CONFIG_SYS_PROMPT "=>" /* Monitor Command Prompt */ +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_SYS_LONGHELP /* #undef to save memory */ #if defined(CONFIG_CMD_KGDB) -#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #endif -#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) /* Print Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CFG_LOAD_ADDR 0x00100000 +#define CONFIG_SYS_LOAD_ADDR 0x00100000 -#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ +#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ -#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } /* * Low Level Configuration Settings @@ -158,25 +158,25 @@ /*----------------------------------------------------------------------- * Internal Memory Mapped Register */ -#define CFG_IMMR 0xFF000000 +#define CONFIG_SYS_IMMR 0xFF000000 /*----------------------------------------------------------------------- * Definitions for initial stack pointer and data area (in DPRAM) */ -#define CFG_INIT_RAM_ADDR CFG_IMMR -#define CFG_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ -#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) -#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET +#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR +#define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ +#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- * Start addresses for the final memory configuration * (Set up by the startup code) - * Please note that CFG_SDRAM_BASE _must_ start at 0 + * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 */ -#define CFG_SDRAM_BASE 0x00000000 +#define CONFIG_SYS_SDRAM_BASE 0x00000000 #if defined(CONFIG_MPC86xADS) || defined(CONFIG_MPC885ADS) /* New ADS or Duet */ -#define CFG_SDRAM_SIZE 0x00800000 /* 8 Mbyte */ +#define CONFIG_SYS_SDRAM_SIZE 0x00800000 /* 8 Mbyte */ /* * 2048 SDRAM rows * 1000 factor s -> ms @@ -184,55 +184,55 @@ * 4 Number of refresh cycles per period * 64 Refresh cycle in ms per number of rows */ -#define CFG_PTA_PER_CLK ((2048 * 64 * 1000) / (4 * 64)) +#define CONFIG_SYS_PTA_PER_CLK ((2048 * 64 * 1000) / (4 * 64)) #elif defined(CONFIG_FADS) /* Old/new FADS */ -#define CFG_SDRAM_SIZE 0x00400000 /* 4 Mbyte */ +#define CONFIG_SYS_SDRAM_SIZE 0x00400000 /* 4 Mbyte */ #else /* Old ADS */ -#define CFG_SDRAM_SIZE 0x00000000 /* No SDRAM */ +#define CONFIG_SYS_SDRAM_SIZE 0x00000000 /* No SDRAM */ #endif -#define CFG_MEMTEST_START 0x0100000 /* memtest works on */ -#if (CFG_SDRAM_SIZE) -#define CFG_MEMTEST_END CFG_SDRAM_SIZE /* 1 ... SDRAM_SIZE */ +#define CONFIG_SYS_MEMTEST_START 0x0100000 /* memtest works on */ +#if (CONFIG_SYS_SDRAM_SIZE) +#define CONFIG_SYS_MEMTEST_END CONFIG_SYS_SDRAM_SIZE /* 1 ... SDRAM_SIZE */ #else -#define CFG_MEMTEST_END 0x0400000 /* 1 ... 4 MB in DRAM */ -#endif /* CFG_SDRAM_SIZE */ +#define CONFIG_SYS_MEMTEST_END 0x0400000 /* 1 ... 4 MB in DRAM */ +#endif /* CONFIG_SYS_SDRAM_SIZE */ /* * For booting Linux, the board info and command line data * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ +#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ -#define CFG_MONITOR_BASE TEXT_BASE -#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 KB for monitor */ +#define CONFIG_SYS_MONITOR_BASE TEXT_BASE +#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 KB for monitor */ #ifdef CONFIG_BZIP2 -#define CFG_MALLOC_LEN (2500 << 10) /* Reserve ~2.5 MB for malloc() */ +#define CONFIG_SYS_MALLOC_LEN (2500 << 10) /* Reserve ~2.5 MB for malloc() */ #else -#define CFG_MALLOC_LEN (384 << 10) /* Reserve 384 kB for malloc() */ +#define CONFIG_SYS_MALLOC_LEN (384 << 10) /* Reserve 384 kB for malloc() */ #endif /* CONFIG_BZIP2 */ /*----------------------------------------------------------------------- * Flash organization */ -#define CFG_FLASH_BASE CFG_MONITOR_BASE -#define CFG_FLASH_SIZE ((uint)(8 * 1024 * 1024)) /* max 8Mbyte */ +#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_MONITOR_BASE +#define CONFIG_SYS_FLASH_SIZE ((uint)(8 * 1024 * 1024)) /* max 8Mbyte */ -#define CFG_MAX_FLASH_BANKS 4 /* max number of memory banks */ -#define CFG_MAX_FLASH_SECT 8 /* max number of sectors on one chip */ +#define CONFIG_SYS_MAX_FLASH_BANKS 4 /* max number of memory banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 8 /* max number of sectors on one chip */ -#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ +#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ #define CONFIG_ENV_IS_IN_FLASH 1 #define CONFIG_ENV_SECT_SIZE 0x40000 /* see README - env sector total size */ #define CONFIG_ENV_OFFSET CONFIG_ENV_SECT_SIZE #define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment */ -#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */ +#define CONFIG_SYS_USE_PPCENV /* Environment embedded in sect .ppcenv */ -#define CFG_DIRECT_FLASH_TFTP +#define CONFIG_SYS_DIRECT_FLASH_TFTP #if defined(CONFIG_CMD_JFFS2) @@ -254,22 +254,22 @@ #define MTDPARTS_DEFAULT "mtdparts=fads-0:-@1m(user1),fads-1:-(user2),fads-2:-(user3),fads-3:-(user4)" */ -#define CFG_JFFS2_SORT_FRAGMENTS +#define CONFIG_SYS_JFFS2_SORT_FRAGMENTS #endif /*----------------------------------------------------------------------- * Cache Configuration */ -#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ +#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ +#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */ /*----------------------------------------------------------------------- * I2C configuration */ #if defined(CONFIG_CMD_I2C) #define CONFIG_HARD_I2C 1 /* I2C with hardware support */ -#define CFG_I2C_SPEED 400000 /* I2C speed and slave address defaults */ -#define CFG_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address defaults */ +#define CONFIG_SYS_I2C_SLAVE 0x7F #endif /*----------------------------------------------------------------------- @@ -279,10 +279,10 @@ * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze */ #if defined(CONFIG_WATCHDOG) -#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ +#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP) #else -#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP) +#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP) #endif /*----------------------------------------------------------------------- @@ -290,21 +290,21 @@ *----------------------------------------------------------------------- * PCMCIA config., multi-function pin tri-state */ -#define CFG_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01) +#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01) /*----------------------------------------------------------------------- * TBSCR - Time Base Status and Control 11-26 *----------------------------------------------------------------------- * Clear Reference Interrupt Status, Timebase freezing enabled */ -#define CFG_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBE) +#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBE) /*----------------------------------------------------------------------- * PISCR - Periodic Interrupt Status and Control 11-31 *----------------------------------------------------------------------- * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled */ -#define CFG_PISCR (PISCR_PS | PISCR_PITF) +#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF) /*----------------------------------------------------------------------- * SCCR - System Clock and reset Control Register 15-27 @@ -313,14 +313,14 @@ * power management and some other internal clocks */ #define SCCR_MASK SCCR_EBDF11 -#define CFG_SCCR SCCR_TBS +#define CONFIG_SYS_SCCR SCCR_TBS /*----------------------------------------------------------------------- * DER - Debug Enable Register *----------------------------------------------------------------------- * Set to zero to prevent the processor from entering debug mode */ -#define CFG_DER 0 +#define CONFIG_SYS_DER 0 /* Because of the way the 860 starts up and assigns CS0 the entire * address space, we have to set the memory controller differently. @@ -339,17 +339,17 @@ #define BCSR_ADDR ((uint) 0xFF080000) -#define CFG_PRELIM_OR_AM 0xFF800000 /* OR addr mask */ +#define CONFIG_SYS_PRELIM_OR_AM 0xFF800000 /* OR addr mask */ /* FLASH timing: ACS = 10, TRLX = 1, CSNT = 1, SCY = 3, EHTR = 0 */ -#define CFG_OR_TIMING_FLASH (OR_CSNT_SAM | OR_ACS_DIV4 | OR_BI | OR_SCY_3_CLK | OR_TRLX) +#define CONFIG_SYS_OR_TIMING_FLASH (OR_CSNT_SAM | OR_ACS_DIV4 | OR_BI | OR_SCY_3_CLK | OR_TRLX) -#define CFG_OR0_PRELIM (CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH) /* 8 Mbyte until detected */ -#define CFG_BR0_PRELIM ((CFG_FLASH_BASE & BR_BA_MSK) | BR_V ) +#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) /* 8 Mbyte until detected */ +#define CONFIG_SYS_BR0_PRELIM ((CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | BR_V ) /* BCSRx - Board Control and Status Registers */ -#define CFG_OR1_PRELIM 0xFFFF8110 /* 64Kbyte address space */ -#define CFG_BR1_PRELIM ((BCSR_ADDR) | BR_V) +#define CONFIG_SYS_OR1_PRELIM 0xFFFF8110 /* 64Kbyte address space */ +#define CONFIG_SYS_BR1_PRELIM ((BCSR_ADDR) | BR_V) /* * Internal Definitions @@ -442,9 +442,9 @@ /* BSCR5 exists on MPC86xADS and MPC885ADS only */ -#define CFG_PHYDEV_ADDR (BCSR_ADDR + 0x20000) +#define CONFIG_SYS_PHYDEV_ADDR (BCSR_ADDR + 0x20000) -#define BCSR5 (CFG_PHYDEV_ADDR + 0x300) +#define BCSR5 (CONFIG_SYS_PHYDEV_ADDR + 0x300) #define BCSR5_MII2_EN 0x40 #define BCSR5_MII2_RST 0x20 @@ -462,14 +462,14 @@ * PCMCIA stuff *----------------------------------------------------------------------- */ -#define CFG_PCMCIA_MEM_ADDR (0xE0000000) -#define CFG_PCMCIA_MEM_SIZE ( 64 << 20 ) -#define CFG_PCMCIA_DMA_ADDR (0xE4000000) -#define CFG_PCMCIA_DMA_SIZE ( 64 << 20 ) -#define CFG_PCMCIA_ATTRB_ADDR (0xE8000000) -#define CFG_PCMCIA_ATTRB_SIZE ( 64 << 20 ) -#define CFG_PCMCIA_IO_ADDR (0xEC000000) -#define CFG_PCMCIA_IO_SIZE ( 64 << 20 ) +#define CONFIG_SYS_PCMCIA_MEM_ADDR (0xE0000000) +#define CONFIG_SYS_PCMCIA_MEM_SIZE ( 64 << 20 ) +#define CONFIG_SYS_PCMCIA_DMA_ADDR (0xE4000000) +#define CONFIG_SYS_PCMCIA_DMA_SIZE ( 64 << 20 ) +#define CONFIG_SYS_PCMCIA_ATTRB_ADDR (0xE8000000) +#define CONFIG_SYS_PCMCIA_ATTRB_SIZE ( 64 << 20 ) +#define CONFIG_SYS_PCMCIA_IO_ADDR (0xEC000000) +#define CONFIG_SYS_PCMCIA_IO_SIZE ( 64 << 20 ) /*----------------------------------------------------------------------- * IDE/ATA stuff @@ -487,18 +487,18 @@ #undef CONFIG_IDE_LED /* LED for ide not supported */ #undef CONFIG_IDE_RESET /* reset for ide not supported */ -#define CFG_IDE_MAXBUS 1 /* max. 2 IDE busses */ -#define CFG_IDE_MAXDEVICE (CFG_IDE_MAXBUS*2) /* max. 2 drives per IDE bus */ +#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 2 IDE busses */ +#define CONFIG_SYS_IDE_MAXDEVICE (CONFIG_SYS_IDE_MAXBUS*2) /* max. 2 drives per IDE bus */ -#define CFG_ATA_BASE_ADDR CFG_PCMCIA_MEM_ADDR -#define CFG_ATA_IDE0_OFFSET 0x0000 +#define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_PCMCIA_MEM_ADDR +#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 /* Offset for data I/O */ -#define CFG_ATA_DATA_OFFSET (CFG_PCMCIA_MEM_SIZE + 0x320) +#define CONFIG_SYS_ATA_DATA_OFFSET (CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320) /* Offset for normal register accesses */ -#define CFG_ATA_REG_OFFSET (2 * CFG_PCMCIA_MEM_SIZE + 0x320) +#define CONFIG_SYS_ATA_REG_OFFSET (2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320) /* Offset for alternate registers */ -#define CFG_ATA_ALT_OFFSET 0x0000 +#define CONFIG_SYS_ATA_ALT_OFFSET 0x0000 #define CONFIG_DISK_SPINUP_TIME 1000000 /* #undef CONFIG_DISK_SPINUP_TIME */ /* usin Compact Flash */ diff --git a/board/fads/flash.c b/board/fads/flash.c index cd0e4d5dc2..b9afb75170 100644 --- a/board/fads/flash.c +++ b/board/fads/flash.c @@ -24,11 +24,11 @@ #include <common.h> #include <mpc8xx.h> -flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ +flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ #if defined(CONFIG_ENV_IS_IN_FLASH) # ifndef CONFIG_ENV_ADDR -# define CONFIG_ENV_ADDR (CFG_FLASH_BASE + CONFIG_ENV_OFFSET) +# define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET) # endif # ifndef CONFIG_ENV_SIZE # define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE @@ -54,14 +54,14 @@ static int write_word (flash_info_t * info, ulong dest, ulong data); */ unsigned long flash_init (void) { - volatile immap_t *immap = (immap_t *) CFG_IMMR; + volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; volatile memctl8xx_t *memctl = &immap->im_memctl; vu_long *bcsr = (vu_long *)BCSR_ADDR; unsigned long pd_size, total_size, bsize, or_am; int i; /* Init: no FLASHes known */ - for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) { + for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) { flash_info[i].flash_id = FLASH_UNKNOWN; flash_info[i].size = 0; flash_info[i].sector_count = 0; @@ -94,8 +94,8 @@ unsigned long flash_init (void) } total_size = 0; - for (i = 0; i < CFG_MAX_FLASH_BANKS && total_size < pd_size; ++i) { - bsize = flash_get_size((vu_long *)(CFG_FLASH_BASE + total_size), + for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS && total_size < pd_size; ++i) { + bsize = flash_get_size((vu_long *)(CONFIG_SYS_FLASH_BASE + total_size), &flash_info[i]); if (flash_info[i].flash_id == FLASH_UNKNOWN) { @@ -112,15 +112,15 @@ unsigned long flash_init (void) } /* Remap FLASH according to real size */ - memctl->memc_or0 = or_am | CFG_OR_TIMING_FLASH; + memctl->memc_or0 = or_am | CONFIG_SYS_OR_TIMING_FLASH; - for (i = 0; i < CFG_MAX_FLASH_BANKS && flash_info[i].size != 0; ++i) { -#if CFG_MONITOR_BASE >= CFG_FLASH_BASE + for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS && flash_info[i].size != 0; ++i) { +#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE /* monitor protection ON by default */ - if (CFG_MONITOR_BASE >= flash_info[i].start[0]) + if (CONFIG_SYS_MONITOR_BASE >= flash_info[i].start[0]) flash_protect (FLAG_PROTECT_SET, - CFG_MONITOR_BASE, - CFG_MONITOR_BASE + monitor_flash_len - 1, + CONFIG_SYS_MONITOR_BASE, + CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1, &flash_info[i]); #endif @@ -428,7 +428,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) addr = (vu_long *) (info->start[l_sect]); while ((addr[0] & 0xFFFFFFFF) != 0xFFFFFFFF) { - if ((now = get_timer (start)) > CFG_FLASH_ERASE_TOUT) { + if ((now = get_timer (start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { printf ("Timeout\n"); return ERR_TIMOUT; } @@ -552,7 +552,7 @@ static int write_word (flash_info_t * info, ulong dest, ulong data) start = get_timer (0); while ((*((vu_long *) dest) & 0x80808080) != (data & 0x80808080)) { - if (get_timer (start) > CFG_FLASH_WRITE_TOUT) { + if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) { return ERR_TIMOUT; } } |