summaryrefslogtreecommitdiff
path: root/board/freescale/bsc9132qds
diff options
context:
space:
mode:
Diffstat (limited to 'board/freescale/bsc9132qds')
-rw-r--r--board/freescale/bsc9132qds/Kconfig14
-rw-r--r--board/freescale/bsc9132qds/MAINTAINERS25
-rw-r--r--board/freescale/bsc9132qds/Makefile21
-rw-r--r--board/freescale/bsc9132qds/README150
-rw-r--r--board/freescale/bsc9132qds/bsc9132qds.c432
-rw-r--r--board/freescale/bsc9132qds/ddr.c191
-rw-r--r--board/freescale/bsc9132qds/law.c28
-rw-r--r--board/freescale/bsc9132qds/spl_minimal.c117
-rw-r--r--board/freescale/bsc9132qds/tlb.c91
9 files changed, 0 insertions, 1069 deletions
diff --git a/board/freescale/bsc9132qds/Kconfig b/board/freescale/bsc9132qds/Kconfig
deleted file mode 100644
index e5499e6129..0000000000
--- a/board/freescale/bsc9132qds/Kconfig
+++ /dev/null
@@ -1,14 +0,0 @@
-if TARGET_BSC9132QDS
-
-config SYS_BOARD
- default "bsc9132qds"
-
-config SYS_VENDOR
- default "freescale"
-
-config SYS_CONFIG_NAME
- default "BSC9132QDS"
-
-source "board/freescale/common/Kconfig"
-
-endif
diff --git a/board/freescale/bsc9132qds/MAINTAINERS b/board/freescale/bsc9132qds/MAINTAINERS
deleted file mode 100644
index 95abe3d408..0000000000
--- a/board/freescale/bsc9132qds/MAINTAINERS
+++ /dev/null
@@ -1,25 +0,0 @@
-BSC9132QDS BOARD
-M: Naveen Burmi <naveen.burmi@nxp.com>
-S: Maintained
-F: board/freescale/bsc9132qds/
-F: include/configs/BSC9132QDS.h
-F: configs/BSC9132QDS_NAND_DDRCLK100_defconfig
-F: configs/BSC9132QDS_NAND_DDRCLK133_defconfig
-F: configs/BSC9132QDS_NOR_DDRCLK100_defconfig
-F: configs/BSC9132QDS_NOR_DDRCLK133_defconfig
-F: configs/BSC9132QDS_SDCARD_DDRCLK100_defconfig
-F: configs/BSC9132QDS_SDCARD_DDRCLK133_defconfig
-F: configs/BSC9132QDS_SPIFLASH_DDRCLK100_defconfig
-F: configs/BSC9132QDS_SPIFLASH_DDRCLK133_defconfig
-
-BSC9132QDS_NAND_DDRCLK100_SECURE BOARD
-M: Ruchika Gupta <ruchika.gupta@nxp.com>
-S: Maintained
-F: configs/BSC9132QDS_NAND_DDRCLK100_SECURE_defconfig
-F: configs/BSC9132QDS_NAND_DDRCLK133_SECURE_defconfig
-F: configs/BSC9132QDS_NOR_DDRCLK100_SECURE_defconfig
-F: configs/BSC9132QDS_NOR_DDRCLK133_SECURE_defconfig
-F: configs/BSC9132QDS_SDCARD_DDRCLK100_SECURE_defconfig
-F: configs/BSC9132QDS_SDCARD_DDRCLK133_SECURE_defconfig
-F: configs/BSC9132QDS_SPIFLASH_DDRCLK100_SECURE_defconfig
-F: configs/BSC9132QDS_SPIFLASH_DDRCLK133_SECURE_defconfig
diff --git a/board/freescale/bsc9132qds/Makefile b/board/freescale/bsc9132qds/Makefile
deleted file mode 100644
index dcbdf42147..0000000000
--- a/board/freescale/bsc9132qds/Makefile
+++ /dev/null
@@ -1,21 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# Copyright 2013 Freescale Semiconductor, Inc.
-
-MINIMAL=
-
-ifdef CONFIG_SPL_BUILD
-ifdef CONFIG_SPL_INIT_MINIMAL
-MINIMAL=y
-endif
-endif
-
-ifdef MINIMAL
-obj-y += spl_minimal.o
-else
-obj-y += bsc9132qds.o
-obj-y += ddr.o
-endif
-
-obj-y += law.o
-obj-y += tlb.o
diff --git a/board/freescale/bsc9132qds/README b/board/freescale/bsc9132qds/README
deleted file mode 100644
index ede95d41da..0000000000
--- a/board/freescale/bsc9132qds/README
+++ /dev/null
@@ -1,150 +0,0 @@
-Overview
---------
- The BSC9132 is a highly integrated device that targets the evolving
- Microcell, Picocell, and Enterprise-Femto base station market subsegments.
-
- The BSC9132 device combines Power Architecture e500 and DSP StarCore SC3850
- core technologies with MAPLE-B2P baseband acceleration processing elements
- to address the need for a high performance, low cost, integrated solution
- that handles all required processing layers without the need for an
- external device except for an RF transceiver or, in a Micro base station
- configuration, a host device that handles the L3/L4 and handover between
- sectors.
-
- The BSC9132 SoC includes the following function and features:
- - Power Architecture subsystem including two e500 processors with
- 512-Kbyte shared L2 cache
- - Two StarCore SC3850 DSP subsystems, each with a 512-Kbyte private L2
- cache
- - 32 Kbyte of shared M3 memory
- - The Multi Accelerator Platform Engine for Pico BaseStation Baseband
- Processing (MAPLE-B2P)
- - Two DDR3/3L memory interfaces with 32-bit data width (40 bits including
- ECC), up to 1333 MHz data rate
- - Dedicated security engine featuring trusted boot
- - Two DMA controllers
- - OCNDMA with four bidirectional channels
- - SysDMA with sixteen bidirectional channels
- - Interfaces
- - Four-lane SerDes PHY
- - PCI Express controller complies with the PEX Specification-Rev 2.0
- - Two Common Public Radio Interface (CPRI) controller lanes
- - High-speed USB 2.0 host and device controller with ULPI interface
- - Enhanced secure digital (SD/MMC) host controller (eSDHC)
- - Antenna interface controller (AIC), supporting four industry
- standard JESD207/four custom ADI RF interfaces
- - ADI lanes support both full duplex FDD support & half duplex TDD
- - Universal Subscriber Identity Module (USIM) interface that
- facilitates communication to SIM cards or Eurochip pre-paid phone
- cards
- - Two DUART, two eSPI, and two I2C controllers
- - Integrated Flash memory controller (IFC)
- - GPIO
- - Sixteen 32-bit timers
-
-The SC3850 core subsystem consists of the following:
- - 32 KB, 8-way, level 1 instruction cache (L1 ICache)
- - 32 KB, 8-way, level 1 data cache (L1 DCache)
- - 512 KB, 8-way, level 2 unified instruction/data cache (L2 cache/M2 memory)
- - Memory management unit (MMU)
- - Global interrupt controller ( GIC)
- - Debug and profiling unit (DPU)
- - Two 32-bit quad timers
-
-BSC9132QDS board Overview
--------------------------
- 2Gbyte DDR3 (on board DDR), Dual Ranki
- 32Mbyte 16bit NOR flash
- 128Mbyte 2K page size NAND Flash
- 256 Kbit M24256 I2C EEPROM
- 128 Mbit SPI Flash memory
- SD slot
- USB-ULPI
- eTSEC1: Connected to SGMII PHY
- eTSEC2: Connected to SGMII PHY
- PCIe
- CPRI
- SerDes
- I2C RTC
- DUART interface: supports one UARTs up to 115200 bps for console display
-
-Frequency Combinations Supported
---------------------------------
-Core MHz/CCB MHz/DDR(MT/s)
-1. CPU0/CPU1/CCB/DDR: 1000MHz/1000MHz/500MHz/800MHz
- (SYSCLK = 100MHz, DDRCLK = 100MHz)
-2. CPU0/CPU1/CCB/DDR: 1200MHz/1200MHz/600MHz/1330MHz
- (SYSCLK = 100MHz, DDRCLK = 133MHz)
-
-Boot Methods Supported
------------------------
-1. NOR Flash
-2. NAND Flash
-3. SD Card
-4. SPI flash
-
-Default Boot Method
---------------------
-NOR boot
-
-Building U-Boot
---------------
-To build the U-Boot for BSC9132QDS:
-1. NOR Flash
- make BSC9132QDS_NOR_DDRCLK100 : For 100MHZ DDR CLK
- make BSC9132QDS_NOR_DDRCLK133 : For 133MHZ DDR CLK
-2. NAND Flash : It is currently not supported
-3. SPI Flash
- make BSC9132QDS_SPIFLASH_DDRCLK100 : For 100MHZ DDR CLK
- make BSC9132QDS_SPIFLASH_DDRCLK133 : For 133MHZ DDR CLK
-4. SD Card
- make BSC9132QDS_SDCARD_DDRCLK100 : For 100MHZ DDR CLK
- make BSC9132QDS_SDCARD_DDRCLK133 : For 133MHZ DDR CLK
-
-Memory map
------------
- 0x0000_0000 0x7FFF_FFFF DDR 2G cacheable
- 0x8000_0000 0x8FFF_FFFF NOR Flash 256M
- 0x9000_0000 0x9FFF_FFFF PCIe Memory 256M
- 0xA000_0000 0xA7FF_FFFF DSP core1 L2 space 128M
- 0xB000_0000 0xB0FF_FFFF DSP core0 M2 space 16M
- 0xB100_0000 0xB1FF_FFFF DSP core1 M2 space 16M
- 0xC000_0000 0xC000_7FFF M3 Memory 32K
- 0xC001_0000 0xC001_FFFF PCI Express I/O 64K
- 0xC100_0000 0xC13F_FFFF MAPLE-2F 4M
- 0xC1F0_0000 0xC1F7_FFFF PA SRAM Region 0 512K
- 0xC1F8_0000 0xC1FB_FFFF PA SRAM Region 1 512K
- 0xFED0_0000 0xFED0_3FFF SEC Secured RAM 16K
- 0xFEE0_0000 0xFEE0_0FFF DSP Boot ROM 4K
- 0xFF60_0000 0xFF6F_FFFF DSP CCSR 1M
- 0xFF70_0000 0xFF7F_FFFF PA CCSR 1M
- 0xFF80_0000 0xFFFF_FFFF Boot Page & NAND Buffer 8M
-
-Flashing Images
----------------
-To place a new U-Boot image in the NAND flash and then boot
-with that new image temporarily, use this:
- tftp 1000000 u-boot-nand.bin
- nand erase 0 100000
- nand write 1000000 0 100000
- reset
-
-Using the Device Tree Source File
----------------------------------
-To create the DTB (Device Tree Binary) image file,
-use a command similar to this:
-
- dtc -b 0 -f -I dts -O dtb bsc9132qds.dts > bsc9132qds.dtb
-
-Likely, that .dts file will come from here;
-
- linux-2.6/arch/powerpc/boot/dts/bsc9132qds.dts
-
-Booting Linux
--------------
-Place a linux uImage in the TFTP disk area.
-
- tftp 1000000 uImage
- tftp 2000000 rootfs.ext2.gz.uboot
- tftp c00000 bsc9132qds.dtb
- bootm 1000000 2000000 c00000
diff --git a/board/freescale/bsc9132qds/bsc9132qds.c b/board/freescale/bsc9132qds/bsc9132qds.c
deleted file mode 100644
index 6870674f7a..0000000000
--- a/board/freescale/bsc9132qds/bsc9132qds.c
+++ /dev/null
@@ -1,432 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- */
-
-#include <common.h>
-#include <image.h>
-#include <init.h>
-#include <net.h>
-#include <asm/processor.h>
-#include <asm/mmu.h>
-#include <asm/cache.h>
-#include <asm/immap_85xx.h>
-#include <asm/io.h>
-#include <env.h>
-#include <miiphy.h>
-#include <linux/libfdt.h>
-#include <fdt_support.h>
-#include <fsl_mdio.h>
-#include <tsec.h>
-#include <mmc.h>
-#include <netdev.h>
-#include <fsl_ifc.h>
-#include <hwconfig.h>
-#include <i2c.h>
-#include <fsl_ddr_sdram.h>
-#include <jffs2/load_kernel.h>
-#include <mtd_node.h>
-#include <flash.h>
-
-#ifdef CONFIG_PCI
-#include <pci.h>
-#include <asm/fsl_pci.h>
-#endif
-
-#include "../common/qixis.h"
-DECLARE_GLOBAL_DATA_PTR;
-
-
-int board_early_init_f(void)
-{
- struct fsl_ifc ifc = {(void *)CONFIG_SYS_IFC_ADDR, (void *)NULL};
-
- setbits_be32(&ifc.gregs->ifc_gcr, 1 << IFC_GCR_TBCTL_TRN_TIME_SHIFT);
-
- return 0;
-}
-
-void board_config_serdes_mux(void)
-{
- ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
- u32 pordevsr = in_be32(&gur->pordevsr);
- u32 srds_cfg = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >>
- MPC85xx_PORDEVSR_IO_SEL_SHIFT;
-
- switch (srds_cfg) {
- /* PEX(1) PEX(2) CPRI 2 CPRI 1 */
- case 1:
- case 2:
- case 3:
- case 4:
- case 5:
- case 22:
- case 23:
- case 24:
- case 25:
- case 26:
- QIXIS_WRITE_I2C(brdcfg[4], 0x03);
- break;
-
- /* PEX(1) PEX(2) SGMII1 CPRI 1 */
- case 6:
- case 7:
- case 8:
- case 9:
- case 10:
- case 27:
- case 28:
- case 29:
- case 30:
- case 31:
- QIXIS_WRITE_I2C(brdcfg[4], 0x01);
- break;
-
- /* PEX(1) PEX(2) SGMII1 SGMII2 */
- case 11:
- case 32:
- QIXIS_WRITE_I2C(brdcfg[4], 0x00);
- break;
-
- /* PEX(1) SGMII2 CPRI 2 CPRI 1 */
- case 12:
- case 13:
- case 14:
- case 15:
- case 16:
- case 33:
- case 34:
- case 35:
- case 36:
- case 37:
- QIXIS_WRITE_I2C(brdcfg[4], 0x07);
- break;
-
- /* PEX(1) SGMII2 SGMII1 CPRI 1 */
- case 17:
- case 18:
- case 19:
- case 20:
- case 21:
- case 38:
- case 39:
- case 40:
- case 41:
- case 42:
- QIXIS_WRITE_I2C(brdcfg[4], 0x05);
- break;
-
- /* SGMII1 SGMII2 CPRI 2 CPRI 1 */
- case 43:
- case 44:
- case 45:
- case 46:
- case 47:
- QIXIS_WRITE_I2C(brdcfg[4], 0x0F);
- break;
-
-
- default:
- break;
- }
-}
-
-/* Configure DSP DDR controller */
-void dsp_ddr_configure(void)
-{
- /*
- *There are separate DDR-controllers for DSP and PowerPC side DDR.
- *copy the ddr controller settings from PowerPC side DDR controller
- *to the DSP DDR controller as connected DDR memories are similar.
- */
- struct ccsr_ddr __iomem *pa_ddr =
- (struct ccsr_ddr __iomem *)CONFIG_SYS_FSL_DDR_ADDR;
- struct ccsr_ddr temp_ddr;
- struct ccsr_ddr __iomem *dsp_ddr =
- (struct ccsr_ddr __iomem *)CONFIG_SYS_FSL_DSP_CCSR_DDR_ADDR;
-
- memcpy(&temp_ddr, pa_ddr, sizeof(struct ccsr_ddr));
- temp_ddr.cs0_bnds = CONFIG_SYS_DDR1_CS0_BNDS;
- temp_ddr.sdram_cfg &= ~SDRAM_CFG_MEM_EN;
- memcpy(dsp_ddr, &temp_ddr, sizeof(struct ccsr_ddr));
- dsp_ddr->sdram_cfg |= SDRAM_CFG_MEM_EN;
-}
-
-int board_early_init_r(void)
-{
-#ifdef CONFIG_MTD_NOR_FLASH
- const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
- int flash_esel = find_tlb_idx((void *)flashbase, 1);
-
- /*
- * Remap Boot flash region to caching-inhibited
- * so that flash can be erased properly.
- */
-
- /* Flush d-cache and invalidate i-cache of any FLASH data */
- flush_dcache();
- invalidate_icache();
-
- if (flash_esel == -1) {
- /* very unlikely unless something is messed up */
- puts("Error: Could not find TLB for FLASH BASE\n");
- flash_esel = 2; /* give our best effort to continue */
- } else {
- /* invalidate existing TLB entry for flash */
- disable_tlb(flash_esel);
- }
-
- set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, flash_esel, BOOKE_PAGESZ_64M, 1);
-
- set_tlb(1, flashbase + 0x4000000,
- CONFIG_SYS_FLASH_BASE_PHYS + 0x4000000,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, flash_esel+1, BOOKE_PAGESZ_64M, 1);
-#endif
- board_config_serdes_mux();
- dsp_ddr_configure();
- return 0;
-}
-
-#ifdef CONFIG_PCI
-void pci_init_board(void)
-{
- fsl_pcie_init_board(0);
-}
-#endif /* ifdef CONFIG_PCI */
-
-int checkboard(void)
-{
- struct cpu_type *cpu;
- u8 sw;
-
- cpu = gd->arch.cpu;
- printf("Board: %sQDS\n", cpu->name);
-
- printf("Sys ID: 0x%02x, Sys Ver: 0x%02x, FPGA Ver: 0x%02x,\n",
- QIXIS_READ(id), QIXIS_READ(arch), QIXIS_READ(scver));
-
- sw = QIXIS_READ(brdcfg[0]);
- sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT;
-
- printf("IFC chip select:");
- switch (sw) {
- case 0:
- printf("NOR\n");
- break;
- case 2:
- printf("Promjet\n");
- break;
- case 4:
- printf("NAND\n");
- break;
- default:
- printf("Invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH);
- break;
- }
-
- return 0;
-}
-
-int board_eth_init(bd_t *bis)
-{
-#ifdef CONFIG_TSEC_ENET
- struct fsl_pq_mdio_info mdio_info;
- struct tsec_info_struct tsec_info[4];
- int num = 0;
-
-#ifdef CONFIG_TSEC1
- SET_STD_TSEC_INFO(tsec_info[num], 1);
- num++;
-
-#endif
-
-#ifdef CONFIG_TSEC2
- SET_STD_TSEC_INFO(tsec_info[num], 2);
- num++;
-#endif
-
- mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
- mdio_info.name = DEFAULT_MII_NAME;
-
- fsl_pq_mdio_init(bis, &mdio_info);
- tsec_eth_init(bis, tsec_info, num);
-#endif
-
- #ifdef CONFIG_PCI
- pci_eth_init(bis);
- #endif
-
- return 0;
-}
-
-#define USBMUX_SEL_MASK 0xc0
-#define USBMUX_SEL_UART2 0xc0
-#define USBMUX_SEL_USB 0x40
-#define SPIMUX_SEL_UART3 0x80
-#define GPS_MUX_SEL_GPS 0x40
-
-#define TSEC_1588_CLKIN_MASK 0x03
-#define CON_XCVR_REF_CLK 0x00
-
-int misc_init_r(void)
-{
- u8 val;
- ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
- u32 porbmsr = in_be32(&gur->porbmsr);
- u32 romloc = (porbmsr >> MPC85xx_PORBMSR_ROMLOC_SHIFT) & 0xf;
-
- /*Configure 1588 clock-in source from RF Card*/
- val = QIXIS_READ_I2C(brdcfg[5]);
- QIXIS_WRITE_I2C(brdcfg[5],
- (val & ~(TSEC_1588_CLKIN_MASK)) | CON_XCVR_REF_CLK);
-
- if (hwconfig("uart2") && hwconfig("usb1")) {
- printf("UART2 and USB cannot work together on the board\n");
- printf("Remove one from hwconfig and reset\n");
- } else {
- if (hwconfig("uart2")) {
- val = QIXIS_READ_I2C(brdcfg[5]);
- QIXIS_WRITE_I2C(brdcfg[5],
- (val & ~(USBMUX_SEL_MASK)) | USBMUX_SEL_UART2);
- clrbits_be32(&gur->pmuxcr3,
- MPC85xx_PMUXCR3_USB_SEL_MASK);
- setbits_be32(&gur->pmuxcr3, MPC85xx_PMUXCR3_UART2_SEL);
- } else {
- /* By default USB should be selected.
- * Programming FPGA to select USB. */
- val = QIXIS_READ_I2C(brdcfg[5]);
- QIXIS_WRITE_I2C(brdcfg[5],
- (val & ~(USBMUX_SEL_MASK)) | USBMUX_SEL_USB);
- }
-
- }
-
- if (hwconfig("sim")) {
- if (romloc == PORBMSR_ROMLOC_NAND_2K ||
- romloc == PORBMSR_ROMLOC_NOR ||
- romloc == PORBMSR_ROMLOC_SPI) {
-
- val = QIXIS_READ_I2C(brdcfg[3]);
- QIXIS_WRITE_I2C(brdcfg[3], val|0x10);
- clrbits_be32(&gur->pmuxcr,
- MPC85xx_PMUXCR0_SIM_SEL_MASK);
- setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR0_SIM_SEL);
- }
- }
-
- if (hwconfig("uart3")) {
- if (romloc == PORBMSR_ROMLOC_NAND_2K ||
- romloc == PORBMSR_ROMLOC_NOR ||
- romloc == PORBMSR_ROMLOC_SDHC) {
-
- /* UART3 and SPI1 (Flashes) are muxed together */
- val = QIXIS_READ_I2C(brdcfg[3]);
- QIXIS_WRITE_I2C(brdcfg[3], (val | SPIMUX_SEL_UART3));
- clrbits_be32(&gur->pmuxcr3,
- MPC85xx_PMUXCR3_UART3_SEL_MASK);
- setbits_be32(&gur->pmuxcr3, MPC85xx_PMUXCR3_UART3_SEL);
-
- /* MUX to select UART3 connection to J24 header
- * or to GPS */
- val = QIXIS_READ_I2C(brdcfg[6]);
- if (hwconfig("gps"))
- QIXIS_WRITE_I2C(brdcfg[6],
- (val | GPS_MUX_SEL_GPS));
- else
- QIXIS_WRITE_I2C(brdcfg[6],
- (val & ~(GPS_MUX_SEL_GPS)));
- }
- }
- return 0;
-}
-
-void fdt_del_node_compat(void *blob, const char *compatible)
-{
- int err;
- int off = fdt_node_offset_by_compatible(blob, -1, compatible);
- if (off < 0) {
- printf("WARNING: could not find compatible node %s: %s.\n",
- compatible, fdt_strerror(off));
- return;
- }
- err = fdt_del_node(blob, off);
- if (err < 0) {
- printf("WARNING: could not remove %s: %s.\n",
- compatible, fdt_strerror(err));
- }
-}
-
-#if defined(CONFIG_OF_BOARD_SETUP)
-#ifdef CONFIG_FDT_FIXUP_PARTITIONS
-static const struct node_info nodes[] = {
- { "cfi-flash", MTD_DEV_TYPE_NOR, },
- { "fsl,ifc-nand", MTD_DEV_TYPE_NAND, },
-};
-#endif
-int ft_board_setup(void *blob, bd_t *bd)
-{
- phys_addr_t base;
- phys_size_t size;
-
- ft_cpu_setup(blob, bd);
-
- base = env_get_bootm_low();
- size = env_get_bootm_size();
-
- #if defined(CONFIG_PCI)
- FT_FSL_PCI_SETUP;
- #endif
-
- fdt_fixup_memory(blob, (u64)base, (u64)size);
-#ifdef CONFIG_FDT_FIXUP_PARTITIONS
- fdt_fixup_mtdparts(blob, nodes, ARRAY_SIZE(nodes));
-#endif
-
- ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
- u32 porbmsr = in_be32(&gur->porbmsr);
- u32 romloc = (porbmsr >> MPC85xx_PORBMSR_ROMLOC_SHIFT) & 0xf;
-
- if (!(hwconfig("uart2") && hwconfig("usb1"))) {
- /* If uart2 is there in hwconfig remove usb node from
- * device tree */
-
- if (hwconfig("uart2")) {
- /* remove dts usb node */
- fdt_del_node_compat(blob, "fsl-usb2-dr");
- } else {
- fsl_fdt_fixup_dr_usb(blob, bd);
- fdt_del_node_and_alias(blob, "serial2");
- }
- }
-
- if (hwconfig("uart3")) {
- if (romloc == PORBMSR_ROMLOC_NAND_2K ||
- romloc == PORBMSR_ROMLOC_NOR ||
- romloc == PORBMSR_ROMLOC_SDHC)
- /* Delete SPI node from the device tree */
- fdt_del_node_and_alias(blob, "spi1");
- } else
- fdt_del_node_and_alias(blob, "serial3");
-
- if (hwconfig("sim")) {
- if (romloc == PORBMSR_ROMLOC_NAND_2K ||
- romloc == PORBMSR_ROMLOC_NOR ||
- romloc == PORBMSR_ROMLOC_SPI) {
-
- /* remove dts sdhc node */
- fdt_del_node_compat(blob, "fsl,esdhc");
- } else if (romloc == PORBMSR_ROMLOC_SDHC) {
-
- /* remove dts sim node */
- fdt_del_node_compat(blob, "fsl,sim-v1.0");
- printf("SIM & SDHC can't work together on the board");
- printf("\nRemove sim from hwconfig and reset\n");
- }
- }
-
- return 0;
-}
-#endif
diff --git a/board/freescale/bsc9132qds/ddr.c b/board/freescale/bsc9132qds/ddr.c
deleted file mode 100644
index f4effe5a2d..0000000000
--- a/board/freescale/bsc9132qds/ddr.c
+++ /dev/null
@@ -1,191 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- */
-
-#include <common.h>
-#include <vsprintf.h>
-#include <asm/mmu.h>
-#include <asm/immap_85xx.h>
-#include <asm/processor.h>
-#include <fsl_ddr_sdram.h>
-#include <fsl_ddr_dimm_params.h>
-#include <asm/io.h>
-#include <asm/fsl_law.h>
-
-#ifndef CONFIG_SYS_DDR_RAW_TIMING
-
-fsl_ddr_cfg_regs_t ddr_cfg_regs_800 = {
- .cs[0].bnds = CONFIG_SYS_DDR_CS0_BNDS,
- .cs[0].config = CONFIG_SYS_DDR_CS0_CONFIG,
- .cs[0].config_2 = CONFIG_SYS_DDR_CS0_CONFIG_2,
- .timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3_800,
- .timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0_800,
- .timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1_800,
- .timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2_800,
- .ddr_sdram_cfg = CONFIG_SYS_DDR_CONTROL,
- .ddr_sdram_cfg_2 = CONFIG_SYS_DDR_CONTROL_2,
- .ddr_sdram_mode = CONFIG_SYS_DDR_MODE_1_800,
- .ddr_sdram_mode_2 = CONFIG_SYS_DDR_MODE_2_800,
- .ddr_sdram_md_cntl = CONFIG_SYS_DDR_MODE_CONTROL,
- .ddr_sdram_interval = CONFIG_SYS_DDR_INTERVAL_800,
- .ddr_data_init = CONFIG_MEM_INIT_VALUE,
- .ddr_sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL_800,
- .ddr_init_addr = CONFIG_SYS_DDR_INIT_ADDR,
- .ddr_init_ext_addr = CONFIG_SYS_DDR_INIT_EXT_ADDR,
- .timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4,
- .timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5,
- .ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CONTROL,
- .ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CONTROL_800,
- .ddr_sr_cntr = CONFIG_SYS_DDR_SR_CNTR,
- .ddr_sdram_rcw_1 = CONFIG_SYS_DDR_RCW_1,
- .ddr_sdram_rcw_2 = CONFIG_SYS_DDR_RCW_2
-};
-
-fsl_ddr_cfg_regs_t ddr_cfg_regs_1333 = {
- .cs[0].bnds = CONFIG_SYS_DDR_CS0_BNDS,
- .cs[0].config = CONFIG_SYS_DDR_CS0_CONFIG,
- .cs[0].config_2 = CONFIG_SYS_DDR_CS0_CONFIG_2,
- .timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3_1333,
- .timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0_1333,
- .timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1_1333,
- .timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2_1333,
- .ddr_sdram_cfg = CONFIG_SYS_DDR_CONTROL,
- .ddr_sdram_cfg_2 = CONFIG_SYS_DDR_CONTROL_2,
- .ddr_sdram_mode = CONFIG_SYS_DDR_MODE_1_1333,
- .ddr_sdram_mode_2 = CONFIG_SYS_DDR_MODE_2_1333,
- .ddr_sdram_md_cntl = CONFIG_SYS_DDR_MODE_CONTROL,
- .ddr_sdram_interval = CONFIG_SYS_DDR_INTERVAL_1333,
- .ddr_data_init = CONFIG_MEM_INIT_VALUE,
- .ddr_sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL_1333,
- .ddr_init_addr = CONFIG_SYS_DDR_INIT_ADDR,
- .ddr_init_ext_addr = CONFIG_SYS_DDR_INIT_EXT_ADDR,
- .timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4,
- .timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5,
- .ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CONTROL,
- .ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CONTROL_1333,
- .ddr_sr_cntr = CONFIG_SYS_DDR_SR_CNTR,
- .ddr_sdram_rcw_1 = CONFIG_SYS_DDR_RCW_1,
- .ddr_sdram_rcw_2 = CONFIG_SYS_DDR_RCW_2
-};
-
-
-fixed_ddr_parm_t fixed_ddr_parm_0[] = {
- {750, 850, &ddr_cfg_regs_800},
- {1060, 1333, &ddr_cfg_regs_1333},
- {0, 0, NULL}
-};
-
-/*
- * Fixed sdram init -- doesn't use serial presence detect.
- */
-phys_size_t fixed_sdram(void)
-{
- int i;
- char buf[32];
- fsl_ddr_cfg_regs_t ddr_cfg_regs;
- phys_size_t ddr_size;
- ulong ddr_freq, ddr_freq_mhz;
-
- ddr_freq = get_ddr_freq(0);
- ddr_freq_mhz = ddr_freq / 1000000;
-
- printf("Configuring DDR for %s MT/s data rate\n",
- strmhz(buf, ddr_freq));
-
- for (i = 0; fixed_ddr_parm_0[i].max_freq > 0; i++) {
- if ((ddr_freq_mhz > fixed_ddr_parm_0[i].min_freq) &&
- (ddr_freq_mhz <= fixed_ddr_parm_0[i].max_freq)) {
- memcpy(&ddr_cfg_regs, fixed_ddr_parm_0[i].ddr_settings,
- sizeof(ddr_cfg_regs));
- break;
- }
- }
-
- if (fixed_ddr_parm_0[i].max_freq == 0)
- panic("Unsupported DDR data rate %s MT/s data rate\n",
- strmhz(buf, ddr_freq));
-
- ddr_size = (phys_size_t) CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
- fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0, 0);
-
- if (set_ddr_laws(CONFIG_SYS_DDR_SDRAM_BASE, ddr_size,
- LAW_TRGT_IF_DDR_1) < 0) {
- printf("ERROR setting Local Access Windows for DDR\n");
- return 0;
- }
-
- return ddr_size;
-}
-
-#else /* CONFIG_SYS_DDR_RAW_TIMING */
-/* Micron MT41J512M8_187E */
-dimm_params_t ddr_raw_timing = {
- .n_ranks = 1,
- .rank_density = 1073741824u,
- .capacity = 1073741824u,
- .primary_sdram_width = 32,
- .ec_sdram_width = 0,
- .registered_dimm = 0,
- .mirrored_dimm = 0,
- .n_row_addr = 15,
- .n_col_addr = 10,
- .n_banks_per_sdram_device = 8,
- .edc_config = 0,
- .burst_lengths_bitmask = 0x0c,
-
- .tckmin_x_ps = 1870,
- .caslat_x = 0x1e << 4, /* 5,6,7,8 */
- .taa_ps = 13125,
- .twr_ps = 15000,
- .trcd_ps = 13125,
- .trrd_ps = 7500,
- .trp_ps = 13125,
- .tras_ps = 37500,
- .trc_ps = 50625,
- .trfc_ps = 160000,
- .twtr_ps = 7500,
- .trtp_ps = 7500,
- .refresh_rate_ps = 7800000,
- .tfaw_ps = 37500,
-};
-
-int fsl_ddr_get_dimm_params(dimm_params_t *pdimm,
- unsigned int controller_number,
- unsigned int dimm_number)
-{
- const char dimm_model[] = "Fixed DDR on board";
-
- if ((controller_number == 0) && (dimm_number == 0)) {
- memcpy(pdimm, &ddr_raw_timing, sizeof(dimm_params_t));
- memset(pdimm->mpart, 0, sizeof(pdimm->mpart));
- memcpy(pdimm->mpart, dimm_model, sizeof(dimm_model) - 1);
- }
-
- return 0;
-}
-
-void fsl_ddr_board_options(memctl_options_t *popts,
- dimm_params_t *pdimm,
- unsigned int ctrl_num)
-{
- int i;
- popts->clk_adjust = 6;
- popts->cpo_override = 0x1f;
- popts->write_data_delay = 2;
- popts->half_strength_driver_enable = 1;
- /* Write leveling override */
- popts->wrlvl_en = 1;
- popts->wrlvl_override = 1;
- popts->wrlvl_sample = 0xf;
- popts->wrlvl_start = 0x8;
- popts->trwt_override = 1;
- popts->trwt = 0;
-
- for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
- popts->cs_local_opts[i].odt_rd_cfg = FSL_DDR_ODT_NEVER;
- popts->cs_local_opts[i].odt_wr_cfg = FSL_DDR_ODT_CS;
- }
-}
-
-#endif /* CONFIG_SYS_DDR_RAW_TIMING */
diff --git a/board/freescale/bsc9132qds/law.c b/board/freescale/bsc9132qds/law.c
deleted file mode 100644
index 6dca3d1751..0000000000
--- a/board/freescale/bsc9132qds/law.c
+++ /dev/null
@@ -1,28 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- */
-
-#include <common.h>
-#include <asm/fsl_law.h>
-#include <asm/mmu.h>
-
-struct law_entry law_table[] = {
- SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_128M, LAW_TRGT_IF_IFC),
-#ifdef CONFIG_SYS_NAND_BASE_PHYS
- SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_IFC),
-#endif
-#ifdef CONFIG_SYS_FPGA_BASE_PHYS
- SET_LAW(CONFIG_SYS_FPGA_BASE_PHYS, LAW_SIZE_128K, LAW_TRGT_IF_IFC),
-#endif
- SET_LAW(CONFIG_SYS_FSL_DSP_CCSRBAR_PHYS, LAW_SIZE_1M,
- LAW_TRGT_IF_DSP_CCSR),
- SET_LAW(CONFIG_SYS_FSL_DSP_M2_RAM_ADDR, LAW_SIZE_32M,
- LAW_TRGT_IF_OCN_DSP),
- SET_LAW(CONFIG_SYS_FSL_DSP_M3_RAM_ADDR, LAW_SIZE_32K,
- LAW_TRGT_IF_CLASS_DSP),
- SET_LAW(CONFIG_SYS_FSL_DSP_DDR_ADDR, LAW_SIZE_1G,
- LAW_TRGT_IF_CLASS_DSP)
-};
-
-int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/freescale/bsc9132qds/spl_minimal.c b/board/freescale/bsc9132qds/spl_minimal.c
deleted file mode 100644
index dd56ad6b2b..0000000000
--- a/board/freescale/bsc9132qds/spl_minimal.c
+++ /dev/null
@@ -1,117 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- */
-
-#include <common.h>
-#include <init.h>
-#include <ns16550.h>
-#include <asm/io.h>
-#include <nand.h>
-#include <linux/compiler.h>
-#include <asm/fsl_law.h>
-#include <fsl_ddr_sdram.h>
-#include <asm/global_data.h>
-#include <linux/delay.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static void sdram_init(void)
-{
- struct ccsr_ddr __iomem *ddr =
- (struct ccsr_ddr __iomem *)CONFIG_SYS_FSL_DDR_ADDR;
-#if CONFIG_DDR_CLK_FREQ == 100000000
- __raw_writel(CONFIG_SYS_DDR_CS0_BNDS, &ddr->cs0_bnds);
- __raw_writel(CONFIG_SYS_DDR_CS0_CONFIG, &ddr->cs0_config);
- __raw_writel(CONFIG_SYS_DDR_CONTROL_800 | SDRAM_CFG_32_BE, &ddr->sdram_cfg);
- __raw_writel(CONFIG_SYS_DDR_CONTROL_2_800, &ddr->sdram_cfg_2);
- __raw_writel(CONFIG_SYS_DDR_DATA_INIT, &ddr->sdram_data_init);
-
- __raw_writel(CONFIG_SYS_DDR_TIMING_3_800, &ddr->timing_cfg_3);
- __raw_writel(CONFIG_SYS_DDR_TIMING_0_800, &ddr->timing_cfg_0);
- __raw_writel(CONFIG_SYS_DDR_TIMING_1_800, &ddr->timing_cfg_1);
- __raw_writel(CONFIG_SYS_DDR_TIMING_2_800, &ddr->timing_cfg_2);
- __raw_writel(CONFIG_SYS_DDR_MODE_1_800, &ddr->sdram_mode);
- __raw_writel(CONFIG_SYS_DDR_MODE_2_800, &ddr->sdram_mode_2);
- __raw_writel(CONFIG_SYS_DDR_INTERVAL_800, &ddr->sdram_interval);
- __raw_writel(CONFIG_SYS_DDR_CLK_CTRL_800, &ddr->sdram_clk_cntl);
- __raw_writel(CONFIG_SYS_DDR_WRLVL_CONTROL_800, &ddr->ddr_wrlvl_cntl);
-
- __raw_writel(CONFIG_SYS_DDR_TIMING_4_800, &ddr->timing_cfg_4);
- __raw_writel(CONFIG_SYS_DDR_TIMING_5_800, &ddr->timing_cfg_5);
- __raw_writel(CONFIG_SYS_DDR_ZQ_CONTROL, &ddr->ddr_zq_cntl);
-#elif CONFIG_DDR_CLK_FREQ == 133000000
- __raw_writel(CONFIG_SYS_DDR_CS0_BNDS, &ddr->cs0_bnds);
- __raw_writel(CONFIG_SYS_DDR_CS0_CONFIG, &ddr->cs0_config);
- __raw_writel(CONFIG_SYS_DDR_CONTROL_1333 | SDRAM_CFG_32_BE, &ddr->sdram_cfg);
- __raw_writel(CONFIG_SYS_DDR_CONTROL_2_1333, &ddr->sdram_cfg_2);
- __raw_writel(CONFIG_SYS_DDR_DATA_INIT, &ddr->sdram_data_init);
-
- __raw_writel(CONFIG_SYS_DDR_TIMING_3_1333, &ddr->timing_cfg_3);
- __raw_writel(CONFIG_SYS_DDR_TIMING_0_1333, &ddr->timing_cfg_0);
- __raw_writel(CONFIG_SYS_DDR_TIMING_1_1333, &ddr->timing_cfg_1);
- __raw_writel(CONFIG_SYS_DDR_TIMING_2_1333, &ddr->timing_cfg_2);
- __raw_writel(CONFIG_SYS_DDR_MODE_1_1333, &ddr->sdram_mode);
- __raw_writel(CONFIG_SYS_DDR_MODE_2_1333, &ddr->sdram_mode_2);
- __raw_writel(CONFIG_SYS_DDR_INTERVAL_1333, &ddr->sdram_interval);
- __raw_writel(CONFIG_SYS_DDR_CLK_CTRL_1333, &ddr->sdram_clk_cntl);
- __raw_writel(CONFIG_SYS_DDR_WRLVL_CONTROL_1333, &ddr->ddr_wrlvl_cntl);
-
- __raw_writel(CONFIG_SYS_DDR_TIMING_4_1333, &ddr->timing_cfg_4);
- __raw_writel(CONFIG_SYS_DDR_TIMING_5_1333, &ddr->timing_cfg_5);
- __raw_writel(CONFIG_SYS_DDR_ZQ_CONTROL, &ddr->ddr_zq_cntl);
-#else
- puts("Not a valid DDR Freq Found! Please Reset\n");
-#endif
- asm volatile("sync;isync");
- udelay(500);
-
- /* Let the controller go */
- out_be32(&ddr->sdram_cfg, in_be32(&ddr->sdram_cfg) | SDRAM_CFG_MEM_EN);
-
- set_next_law(CONFIG_SYS_NAND_DDR_LAW, LAW_SIZE_1G, LAW_TRGT_IF_DDR_1);
-}
-
-void board_init_f(ulong bootflag)
-{
- u32 plat_ratio;
- ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
-
- /* initialize selected port with appropriate baud rate */
- plat_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_PLAT_RATIO;
- plat_ratio >>= 1;
- gd->bus_clk = CONFIG_SYS_CLK_FREQ * plat_ratio;
-
- NS16550_init((NS16550_t)CONFIG_SYS_NS16550_COM1,
- gd->bus_clk / 16 / CONFIG_BAUDRATE);
-
- puts("\nNAND boot... ");
-
- /* Initialize the DDR3 */
- sdram_init();
-
- /* copy code to RAM and jump to it - this should not return */
- /* NOTE - code has to be copied out of NAND buffer before
- * other blocks can be read.
- */
- relocate_code(CONFIG_SPL_RELOC_STACK, 0, CONFIG_SPL_RELOC_TEXT_BASE);
-}
-
-void board_init_r(gd_t *gd, ulong dest_addr)
-{
- nand_boot();
-}
-
-void putc(char c)
-{
- if (c == '\n')
- NS16550_putc((NS16550_t)CONFIG_SYS_NS16550_COM1, '\r');
-
- NS16550_putc((NS16550_t)CONFIG_SYS_NS16550_COM1, c);
-}
-
-void puts(const char *str)
-{
- while (*str)
- putc(*str++);
-}
diff --git a/board/freescale/bsc9132qds/tlb.c b/board/freescale/bsc9132qds/tlb.c
deleted file mode 100644
index 9466814172..0000000000
--- a/board/freescale/bsc9132qds/tlb.c
+++ /dev/null
@@ -1,91 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- */
-
-#include <common.h>
-#include <asm/mmu.h>
-
-struct fsl_e_tlb_entry tlb_table[] = {
- /* TLB 0 - for temp stack in cache */
- SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR,
- MAS3_SX|MAS3_SW|MAS3_SR, 0,
- 0, 0, BOOKE_PAGESZ_4K, 0),
- SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024 ,
- CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
- MAS3_SX|MAS3_SW|MAS3_SR, 0,
- 0, 0, BOOKE_PAGESZ_4K, 0),
- SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024 ,
- CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
- MAS3_SX|MAS3_SW|MAS3_SR, 0,
- 0, 0, BOOKE_PAGESZ_4K, 0),
- SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024 ,
- CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
- MAS3_SX|MAS3_SW|MAS3_SR, 0,
- 0, 0, BOOKE_PAGESZ_4K, 0),
-
- /* TLB 1 */
- /* *I*** - Covers boot page */
- SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 0, BOOKE_PAGESZ_4K, 1),
-#ifdef CONFIG_SPL_NAND_BOOT
- SET_TLB_ENTRY(1, 0xffffe000, 0xffffe000,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 10, BOOKE_PAGESZ_4K, 1),
-#endif
-
- /* *I*G* - CCSRBAR (PA) */
- SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 1, BOOKE_PAGESZ_1M, 1),
-
- /* CCSRBAR (DSP) */
- SET_TLB_ENTRY(1, CONFIG_SYS_FSL_DSP_CCSRBAR,
- CONFIG_SYS_FSL_DSP_CCSRBAR_PHYS, MAS3_SW|MAS3_SR,
- MAS2_I|MAS2_G, 0, 2, BOOKE_PAGESZ_1M, 1),
-
-#ifndef CONFIG_SPL_BUILD
- SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS,
- MAS3_SX|MAS3_SR, MAS2_W|MAS2_G,
- 0, 3, BOOKE_PAGESZ_64M, 1),
-
- SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE + 0x4000000,
- CONFIG_SYS_FLASH_BASE_PHYS + 0x4000000,
- MAS3_SX|MAS3_SR, MAS2_W|MAS2_G,
- 0, 4, BOOKE_PAGESZ_64M, 1),
-
-#ifdef CONFIG_PCI
- /* *I*G* - PCI */
- SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT, CONFIG_SYS_PCIE1_MEM_PHYS,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 6, BOOKE_PAGESZ_256M, 1),
-
- /* *I*G* - PCI I/O */
- SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_IO_VIRT, CONFIG_SYS_PCIE1_IO_PHYS,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 7, BOOKE_PAGESZ_64K, 1),
-#endif
-#endif
-
-#if defined(CONFIG_SYS_RAMBOOT) || defined(CONFIG_SPL)
- SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_M,
- 0, 8, BOOKE_PAGESZ_1G, 1),
-#endif
-
-#ifdef CONFIG_SYS_FPGA_BASE
- /* *I*G - Board FPGA */
- SET_TLB_ENTRY(1, CONFIG_SYS_FPGA_BASE, CONFIG_SYS_FPGA_BASE_PHYS,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 9, BOOKE_PAGESZ_256K, 1),
-#endif
-
-#ifdef CONFIG_SYS_NAND_BASE_PHYS
- SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 5, BOOKE_PAGESZ_1M, 1),
-#endif
-};
-
-int num_tlb_entries = ARRAY_SIZE(tlb_table);
generated by cgit (git 2.34.1) at 2024-12-23 19:25:27 +0000