diff options
Diffstat (limited to 'board/freescale/common')
| -rw-r--r-- | board/freescale/common/Makefile | 1 | ||||
| -rw-r--r-- | board/freescale/common/pfuze.c | 54 | ||||
| -rw-r--r-- | board/freescale/common/pfuze.h | 12 | ||||
| -rw-r--r-- | board/freescale/common/sys_eeprom.c | 6 |
4 files changed, 70 insertions, 3 deletions
diff --git a/board/freescale/common/Makefile b/board/freescale/common/Makefile index 32b5a3b70c..25a1bc1a0f 100644 --- a/board/freescale/common/Makefile +++ b/board/freescale/common/Makefile @@ -53,6 +53,7 @@ obj-$(CONFIG_P5040DS) += ics307_clk.o obj-$(CONFIG_VSC_CROSSBAR) += vsc3316_3308.o obj-$(CONFIG_IDT8T49N222A) += idt8t49n222a_serdes_clk.o obj-$(CONFIG_ZM7300) += zm7300.o +obj-$(CONFIG_POWER_PFUZE100) += pfuze.o # deal with common files for P-series corenet based devices obj-$(CONFIG_P2041RDB) += p_corenet/ diff --git a/board/freescale/common/pfuze.c b/board/freescale/common/pfuze.c new file mode 100644 index 0000000000..2cd1794429 --- /dev/null +++ b/board/freescale/common/pfuze.c @@ -0,0 +1,54 @@ +/* + * Copyright 2014 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <power/pmic.h> +#include <power/pfuze100_pmic.h> + +struct pmic *pfuze_common_init(unsigned char i2cbus) +{ + struct pmic *p; + int ret; + unsigned int reg; + + ret = power_pfuze100_init(i2cbus); + if (ret) + return NULL; + + p = pmic_get("PFUZE100"); + ret = pmic_probe(p); + if (ret) + return NULL; + + pmic_reg_read(p, PFUZE100_DEVICEID, ®); + printf("PMIC: PFUZE100 ID=0x%02x\n", reg); + + /* Set SW1AB stanby volage to 0.975V */ + pmic_reg_read(p, PFUZE100_SW1ABSTBY, ®); + reg &= ~SW1x_STBY_MASK; + reg |= SW1x_0_975V; + pmic_reg_write(p, PFUZE100_SW1ABSTBY, reg); + + /* Set SW1AB/VDDARM step ramp up time from 16us to 4us/25mV */ + pmic_reg_read(p, PUZE_100_SW1ABCONF, ®); + reg &= ~SW1xCONF_DVSSPEED_MASK; + reg |= SW1xCONF_DVSSPEED_4US; + pmic_reg_write(p, PUZE_100_SW1ABCONF, reg); + + /* Set SW1C standby voltage to 0.975V */ + pmic_reg_read(p, PFUZE100_SW1CSTBY, ®); + reg &= ~SW1x_STBY_MASK; + reg |= SW1x_0_975V; + pmic_reg_write(p, PFUZE100_SW1CSTBY, reg); + + /* Set SW1C/VDDSOC step ramp up time from 16us to 4us/25mV */ + pmic_reg_read(p, PFUZE100_SW1CCONF, ®); + reg &= ~SW1xCONF_DVSSPEED_MASK; + reg |= SW1xCONF_DVSSPEED_4US; + pmic_reg_write(p, PFUZE100_SW1CCONF, reg); + + return p; +} diff --git a/board/freescale/common/pfuze.h b/board/freescale/common/pfuze.h new file mode 100644 index 0000000000..7a4126cca0 --- /dev/null +++ b/board/freescale/common/pfuze.h @@ -0,0 +1,12 @@ +/* + * Copyright 2014 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __PFUZE_BOARD_HELPER__ +#define __PFUZE_BOARD_HELPER__ + +struct pmic *pfuze_common_init(unsigned char i2cbus); + +#endif diff --git a/board/freescale/common/sys_eeprom.c b/board/freescale/common/sys_eeprom.c index 6144c533ef..c9c8eaade2 100644 --- a/board/freescale/common/sys_eeprom.c +++ b/board/freescale/common/sys_eeprom.c @@ -114,7 +114,7 @@ static void show_eeprom(void) e.date[3] & 0x80 ? "PM" : ""); /* Show MAC addresses */ - for (i = 0; i < min(e.mac_count, MAX_NUM_PORTS); i++) { + for (i = 0; i < min(e.mac_count, (u8)MAX_NUM_PORTS); i++) { u8 *p = e.mac[i]; @@ -223,7 +223,7 @@ static int prog_eeprom(void) */ for (i = 0, p = &e; i < sizeof(e); i += 8, p += 8) { ret = i2c_write(CONFIG_SYS_I2C_EEPROM_ADDR, i, CONFIG_SYS_I2C_EEPROM_ADDR_LEN, - p, min((sizeof(e) - i), 8)); + p, min((int)(sizeof(e) - i), 8)); if (ret) break; udelay(5000); /* 5ms write cycle timing */ @@ -461,7 +461,7 @@ int mac_read_from_eeprom(void) memset(e.mac[8], 0xff, 6); #endif - for (i = 0; i < min(e.mac_count, MAX_NUM_PORTS); i++) { + for (i = 0; i < min(e.mac_count, (u8)MAX_NUM_PORTS); i++) { if (memcmp(&e.mac[i], "\0\0\0\0\0\0", 6) && memcmp(&e.mac[i], "\xFF\xFF\xFF\xFF\xFF\xFF", 6)) { char ethaddr[18]; |