diff options
Diffstat (limited to 'board/freescale/ls1021aqds/ls1021aqds.c')
| -rw-r--r-- | board/freescale/ls1021aqds/ls1021aqds.c | 89 |
1 files changed, 78 insertions, 11 deletions
diff --git a/board/freescale/ls1021aqds/ls1021aqds.c b/board/freescale/ls1021aqds/ls1021aqds.c index f08e54f178..20eade4651 100644 --- a/board/freescale/ls1021aqds/ls1021aqds.c +++ b/board/freescale/ls1021aqds/ls1021aqds.c @@ -20,6 +20,7 @@ #include <fsl_sec.h> #include <spl.h> +#include "../common/sleep.h" #include "../common/qixis.h" #include "ls1021aqds_qixis.h" #ifdef CONFIG_U_QE @@ -48,6 +49,12 @@ enum { MUX_TYPE_SD_PC_SG_SG, }; +enum { + GE0_CLK125, + GE2_CLK125, + GE1_CLK125, +}; + int checkboard(void) { #ifndef CONFIG_QSPI_BOOT @@ -177,7 +184,6 @@ int board_early_init_f(void) #ifdef CONFIG_TSEC_ENET out_be32(&scfg->etsecdmamcr, SCFG_ETSECDMAMCR_LE_BD_FR); - out_be32(&scfg->etsecmcr, SCFG_ETSECCMCR_GE2_CLK125); #endif #ifdef CONFIG_FSL_IFC @@ -188,6 +194,24 @@ int board_early_init_f(void) out_be32(&scfg->qspi_cfg, SCFG_QSPI_CLKSEL); #endif +#ifdef CONFIG_FSL_DCU_FB + out_be32(&scfg->pixclkcr, SCFG_PIXCLKCR_PXCKEN); +#endif + + /* + * Enable snoop requests and DVM message requests for + * Slave insterface S4 (A7 core cluster) + */ + out_le32(&cci->slave[4].snoop_ctrl, + CCI400_DVM_MESSAGE_REQ_EN | CCI400_SNOOP_REQ_EN); + + /* + * Set CCI-400 Slave interface S1, S2 Shareable Override Register + * All transactions are treated as non-shareable + */ + out_le32(&cci->slave[1].sha_ord, CCI400_SHAORD_NON_SHAREABLE); + out_le32(&cci->slave[2].sha_ord, CCI400_SHAORD_NON_SHAREABLE); + /* Workaround for the issue that DDR could not respond to * barrier transaction which is generated by executing DSB/ISB * instruction. Set CCI-400 control override register to @@ -195,6 +219,11 @@ int board_early_init_f(void) * allow barrier transaction to DDR again */ out_le32(&cci->ctrl_ord, CCI400_CTRLORD_TERM_BARRIER); +#if defined(CONFIG_DEEP_SLEEP) + if (is_warm_boot()) + fsl_dp_disable_console(); +#endif + return 0; } @@ -219,9 +248,6 @@ void board_init_f(ulong dummy) pinctl); #endif - /* Set global data pointer */ - gd = &gdata; - /* Clear the BSS */ memset(__bss_start, 0, __bss_end - __bss_start); @@ -231,6 +257,11 @@ void board_init_f(ulong dummy) get_clocks(); +#if defined(CONFIG_DEEP_SLEEP) + if (is_warm_boot()) + fsl_dp_disable_console(); +#endif + preloader_console_init(); #ifdef CONFIG_SPL_I2C_SUPPORT @@ -244,6 +275,32 @@ void board_init_f(ulong dummy) } #endif +void config_etseccm_source(int etsec_gtx_125_mux) +{ + struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR; + + switch (etsec_gtx_125_mux) { + case GE0_CLK125: + out_be32(&scfg->etsecmcr, SCFG_ETSECCMCR_GE0_CLK125); + debug("etseccm set to GE0_CLK125\n"); + break; + + case GE2_CLK125: + out_be32(&scfg->etsecmcr, SCFG_ETSECCMCR_GE2_CLK125); + debug("etseccm set to GE2_CLK125\n"); + break; + + case GE1_CLK125: + out_be32(&scfg->etsecmcr, SCFG_ETSECCMCR_GE1_CLK125); + debug("etseccm set to GE1_CLK125\n"); + break; + + default: + printf("Error! trying to set etseccm to invalid value\n"); + break; + } +} + int config_board_mux(int ctrl_type) { u8 reg12, reg14; @@ -253,6 +310,7 @@ int config_board_mux(int ctrl_type) switch (ctrl_type) { case MUX_TYPE_CAN: + config_etseccm_source(GE2_CLK125); reg14 = SET_EC_MUX_SEL(reg14, PIN_MUX_SEL_CAN); break; case MUX_TYPE_IIC2: @@ -262,6 +320,7 @@ int config_board_mux(int ctrl_type) reg14 = SET_EC_MUX_SEL(reg14, PIN_MUX_SEL_RGMII); break; case MUX_TYPE_SAI: + config_etseccm_source(GE2_CLK125); reg14 = SET_EC_MUX_SEL(reg14, PIN_MUX_SEL_SAI); break; case MUX_TYPE_SDHC: @@ -474,13 +533,6 @@ int board_init(void) /* Set CCI-400 control override register to * enable barrier transaction */ out_le32(&cci->ctrl_ord, CCI400_CTRLORD_EN_BARRIER); - /* - * Set CCI-400 Slave interface S0, S1, S2 Shareable Override Register - * All transactions are treated as non-shareable - */ - out_le32(&cci->slave[0].sha_ord, CCI400_SHAORD_NON_SHAREABLE); - out_le32(&cci->slave[1].sha_ord, CCI400_SHAORD_NON_SHAREABLE); - out_le32(&cci->slave[2].sha_ord, CCI400_SHAORD_NON_SHAREABLE); select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT); @@ -503,6 +555,21 @@ int board_init(void) return 0; } +#if defined(CONFIG_DEEP_SLEEP) +void board_sleep_prepare(void) +{ + struct ccsr_cci400 __iomem *cci = (void *)CONFIG_SYS_CCI400_ADDR; + + /* Set CCI-400 control override register to + * enable barrier transaction */ + out_le32(&cci->ctrl_ord, CCI400_CTRLORD_EN_BARRIER); + +#ifdef CONFIG_LS102XA_NS_ACCESS + enable_devices_ns_access(ns_dev, ARRAY_SIZE(ns_dev)); +#endif +} +#endif + int ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); |