diff options
Diffstat (limited to 'board/freescale/ls1043aqds')
| -rw-r--r-- | board/freescale/ls1043aqds/MAINTAINERS | 2 | ||||
| -rw-r--r-- | board/freescale/ls1043aqds/README | 1 | ||||
| -rw-r--r-- | board/freescale/ls1043aqds/ddr.c | 19 | ||||
| -rw-r--r-- | board/freescale/ls1043aqds/ls1043aqds.c | 27 | ||||
| -rw-r--r-- | board/freescale/ls1043aqds/ls1043aqds_rcw_sd_qspi.cfg | 8 |
5 files changed, 53 insertions, 4 deletions
diff --git a/board/freescale/ls1043aqds/MAINTAINERS b/board/freescale/ls1043aqds/MAINTAINERS index 0c7f648b6c..65a0af1930 100644 --- a/board/freescale/ls1043aqds/MAINTAINERS +++ b/board/freescale/ls1043aqds/MAINTAINERS @@ -7,3 +7,5 @@ F: configs/ls1043aqds_defconfig F: configs/ls1043aqds_nor_ddr3_defconfig F: configs/ls1043aqds_nand_defconfig F: configs/ls1043aqds_sdcard_ifc_defconfig +F: configs/ls1043aqds_sdcard_qspi_defconfig +F: configs/ls1043aqds_qspi_defconfig diff --git a/board/freescale/ls1043aqds/README b/board/freescale/ls1043aqds/README index 6261a778aa..a6fd7a35f5 100644 --- a/board/freescale/ls1043aqds/README +++ b/board/freescale/ls1043aqds/README @@ -94,3 +94,4 @@ a) Promjet Boot b) NOR boot c) NAND boot d) SD boot +e) QSPI boot diff --git a/board/freescale/ls1043aqds/ddr.c b/board/freescale/ls1043aqds/ddr.c index 42d906824a..3d3c53385a 100644 --- a/board/freescale/ls1043aqds/ddr.c +++ b/board/freescale/ls1043aqds/ddr.c @@ -132,9 +132,22 @@ void dram_init_banksize(void) * The address needs to add the offset of its bank. */ gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE; - gd->bd->bi_dram[0].size = gd->ram_size; + if (gd->ram_size > CONFIG_SYS_DDR_BLOCK1_SIZE) { + gd->bd->bi_dram[0].size = CONFIG_SYS_DDR_BLOCK1_SIZE; + gd->bd->bi_dram[1].start = CONFIG_SYS_DDR_BLOCK2_BASE; + gd->bd->bi_dram[1].size = gd->ram_size - + CONFIG_SYS_DDR_BLOCK1_SIZE; #ifdef CONFIG_SYS_MEM_RESERVE_SECURE - gd->secure_ram = gd->bd->bi_dram[0].start + gd->secure_ram; - gd->secure_ram |= MEM_RESERVE_SECURE_MAINTAINED; + gd->secure_ram = gd->bd->bi_dram[1].start + + gd->secure_ram - + CONFIG_SYS_DDR_BLOCK1_SIZE; + gd->secure_ram |= MEM_RESERVE_SECURE_MAINTAINED; #endif + } else { + gd->bd->bi_dram[0].size = gd->ram_size; +#ifdef CONFIG_SYS_MEM_RESERVE_SECURE + gd->secure_ram = gd->bd->bi_dram[0].start + gd->secure_ram; + gd->secure_ram |= MEM_RESERVE_SECURE_MAINTAINED; +#endif + } } diff --git a/board/freescale/ls1043aqds/ls1043aqds.c b/board/freescale/ls1043aqds/ls1043aqds.c index d6696ca812..01db078222 100644 --- a/board/freescale/ls1043aqds/ls1043aqds.c +++ b/board/freescale/ls1043aqds/ls1043aqds.c @@ -40,11 +40,14 @@ enum { #define CFG_SD_MUX3_MUX4 0x1 /* MUX4 */ #define CFG_SD_MUX4_SLOT3 0x0 /* SLOT3 TX/RX1 */ #define CFG_SD_MUX4_SLOT1 0x1 /* SLOT1 TX/RX3 */ +#define CFG_UART_MUX_MASK 0x6 +#define CFG_UART_MUX_SHIFT 1 +#define CFG_LPUART_EN 0x1 int checkboard(void) { char buf[64]; -#ifndef CONFIG_SD_BOOT +#if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_QSPI_BOOT) u8 sw; #endif @@ -52,6 +55,8 @@ int checkboard(void) #ifdef CONFIG_SD_BOOT puts("SD\n"); +#elif defined(CONFIG_QSPI_BOOT) + puts("QSPI\n"); #else sw = QIXIS_READ(brdcfg[0]); sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT; @@ -218,7 +223,17 @@ void board_retimer_init(void) int board_early_init_f(void) { +#ifdef CONFIG_LPUART + u8 uart; +#endif fsl_lsch2_early_init_f(); +#ifdef CONFIG_LPUART + /* We use lpuart0 as system console */ + uart = QIXIS_READ(brdcfg[14]); + uart &= ~CFG_UART_MUX_MASK; + uart |= CFG_LPUART_EN << CFG_UART_MUX_SHIFT; + QIXIS_WRITE(brdcfg[14], uart); +#endif return 0; } @@ -303,6 +318,16 @@ int board_init(void) #ifdef CONFIG_OF_BOARD_SETUP int ft_board_setup(void *blob, bd_t *bd) { + u64 base[CONFIG_NR_DRAM_BANKS]; + u64 size[CONFIG_NR_DRAM_BANKS]; + + /* fixup DT for the two DDR banks */ + base[0] = gd->bd->bi_dram[0].start; + size[0] = gd->bd->bi_dram[0].size; + base[1] = gd->bd->bi_dram[1].start; + size[1] = gd->bd->bi_dram[1].size; + + fdt_fixup_memory_banks(blob, base, size, 2); ft_cpu_setup(blob, bd); #ifdef CONFIG_SYS_DPAA_FMAN diff --git a/board/freescale/ls1043aqds/ls1043aqds_rcw_sd_qspi.cfg b/board/freescale/ls1043aqds/ls1043aqds_rcw_sd_qspi.cfg new file mode 100644 index 0000000000..7783521b95 --- /dev/null +++ b/board/freescale/ls1043aqds/ls1043aqds_rcw_sd_qspi.cfg @@ -0,0 +1,8 @@ +#PBL preamble and RCW header +aa55aa55 01ee0100 +# RCW +# Enable QSPI; disable IFC +08100010 0a000000 00000000 00000000 +14550002 80004012 60040000 c1002000 +00000000 00000000 00000000 00038800 +20124000 00001100 00000096 00000001 |