3 files changed, 21 insertions, 58 deletions
diff --git a/board/freescale/ls2080aqds/README b/board/freescale/ls2080aqds/README
index 6ddad92f2c..5c98866712 100644
--- a/board/freescale/ls2080aqds/README
+++ b/board/freescale/ls2080aqds/README
@@ -7,48 +7,9 @@ SW development platform for the Freescale LS2080A processor series, with
 a complete debugging environment.
 
 LS2080A SoC Overview
-------------------
-The LS2080A integrated multicore processor combines eight ARM Cortex-A57
-processor cores with high-performance data path acceleration logic and network
-and peripheral bus interfaces required for networking, telecom/datacom,
-wireless infrastructure, and mil/aerospace applications.
-
-The LS2080A SoC includes the following function and features:
-
- - Eight 64-bit ARM Cortex-A57 CPUs
- - 1 MB platform cache with ECC
- - Two 64-bit DDR4 SDRAM memory controllers with ECC and interleaving support
- - One secondary 32-bit DDR4 SDRAM memory controller, intended for use by
-  the AIOP
- - Data path acceleration architecture (DPAA2) incorporating acceleration for
- the following functions:
-   - Packet parsing, classification, and distribution (WRIOP)
-   - Queue and Hardware buffer management for scheduling, packet sequencing, and
-     congestion management, buffer allocation and de-allocation (QBMan)
-   - Cryptography acceleration (SEC) at up to 10 Gbps
-   - RegEx pattern matching acceleration (PME) at up to 10 Gbps
-   - Decompression/compression acceleration (DCE) at up to 20 Gbps
-   - Accelerated I/O processing (AIOP) at up to 20 Gbps
-   - QDMA engine
- - 16 SerDes lanes at up to 10.3125 GHz
- - Ethernet interfaces
-   - Up to eight 10 Gbps Ethernet MACs
-   - Up to eight 1 / 2.5 Gbps Ethernet MACs
- - High-speed peripheral interfaces
-   - Four PCIe 3.0 controllers, one supporting SR-IOV
- - Additional peripheral interfaces
-   - Two serial ATA (SATA 3.0) controllers
-   - Two high-speed USB 3.0 controllers with integrated PHY
-   - Enhanced secure digital host controller (eSDXC/eMMC)
-   - Serial peripheral interface (SPI) controller
-   - Quad Serial Peripheral Interface (QSPI) Controller
-   - Four I2C controllers
-   - Two DUARTs
-   - Integrated flash controller (IFC 2.0) supporting NAND and NOR flash
- - Support for hardware virtualization and partitioning enforcement
- - QorIQ platform's trust architecture 3.0
- - Service processor (SP) provides pre-boot initialization and secure-boot
-  capabilities
+--------------------
+Please refer arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc for LS2080A
+SoC overview.
 
  LS2080AQDS board Overview
  -----------------------
diff --git a/board/freescale/ls2080aqds/ddr.h b/board/freescale/ls2080aqds/ddr.h
index b76ea61ba0..eba62c33b2 100644
--- a/board/freescale/ls2080aqds/ddr.h
+++ b/board/freescale/ls2080aqds/ddr.h
@@ -28,10 +28,10 @@ static const struct board_specific_parameters udimm0[] = {
 	 *   num|  hi| rank|  clk| wrlvl |   wrlvl   |  wrlvl
 	 * ranks| mhz| GB  |adjst| start |   ctl2    |  ctl3
 	 */
-	{2,  1350, 0, 4,     6, 0x0708090B, 0x0C0D0E09,},
-	{2,  1666, 0, 4,     7, 0x08090A0C, 0x0D0F100B,},
-	{2,  1900, 0, 4,     7, 0x09090B0D, 0x0E10120B,},
-	{2,  2300, 0, 4,     8, 0x090A0C0F, 0x1012130C,},
+	{2,  1350, 0, 8,     6, 0x0708090B, 0x0C0D0E09,},
+	{2,  1666, 0, 8,     7, 0x08090A0C, 0x0D0F100B,},
+	{2,  1900, 0, 8,     7, 0x09090B0D, 0x0E10120B,},
+	{2,  2300, 0, 8,     8, 0x090A0C0F, 0x1012130C,},
 	{}
 };
 
@@ -42,10 +42,10 @@ static const struct board_specific_parameters udimm2[] = {
 	 *   num|  hi| rank|  clk| wrlvl |   wrlvl   |  wrlvl
 	 * ranks| mhz| GB  |adjst| start |   ctl2    |  ctl3
 	 */
-	{2,  1350, 0, 4,   0xd, 0x0C0A0A00, 0x00000009,},
-	{2,  1666, 0, 4,   0xd, 0x0C0A0A00, 0x00000009,},
-	{2,  1900, 0, 4,   0xe, 0x0D0C0B00, 0x0000000A,},
-	{2,  2200, 0, 4,   0xe, 0x0D0C0B00, 0x0000000A,},
+	{2,  1350, 0, 8,   0xd, 0x0C0A0A00, 0x00000009,},
+	{2,  1666, 0, 8,   0xd, 0x0C0A0A00, 0x00000009,},
+	{2,  1900, 0, 8,   0xe, 0x0D0C0B00, 0x0000000A,},
+	{2,  2200, 0, 8,   0xe, 0x0D0C0B00, 0x0000000A,},
 	{}
 };
 
@@ -55,10 +55,10 @@ static const struct board_specific_parameters rdimm0[] = {
 	 *   num|  hi| rank|  clk| wrlvl |   wrlvl   |  wrlvl
 	 * ranks| mhz| GB  |adjst| start |   ctl2    |  ctl3
 	 */
-	{2,  1350, 0, 4,     6, 0x0708090B, 0x0C0D0E09,},
-	{2,  1666, 0, 4,     7, 0x08090A0C, 0x0D0F100B,},
-	{2,  1900, 0, 4,     7, 0x09090B0D, 0x0E10120B,},
-	{2,  2200, 0, 4,     8, 0x090A0C0F, 0x1012130C,},
+	{2,  1350, 0, 8,     6, 0x0708090B, 0x0C0D0E09,},
+	{2,  1666, 0, 8,     7, 0x08090A0C, 0x0D0F100B,},
+	{2,  1900, 0, 8,     7, 0x09090B0D, 0x0E10120B,},
+	{2,  2200, 0, 8,     8, 0x090A0C0F, 0x1012130C,},
 	{}
 };
 
@@ -69,10 +69,10 @@ static const struct board_specific_parameters rdimm2[] = {
 	 *   num|  hi| rank|  clk| wrlvl |   wrlvl   |  wrlvl
 	 * ranks| mhz| GB  |adjst| start |   ctl2    |  ctl3
 	 */
-	{2,  1350, 0, 4,     6, 0x0708090B, 0x0C0D0E09,},
-	{2,  1666, 0, 4,     7, 0x0B0A090C, 0x0D0F100B,},
-	{2,  1900, 0, 4,     7, 0x09090B0D, 0x0E10120B,},
-	{2,  2200, 0, 4,     8, 0x090A0C0F, 0x1012130C,},
+	{2,  1350, 0, 8,     6, 0x0708090B, 0x0C0D0E09,},
+	{2,  1666, 0, 8,     7, 0x0B0A090C, 0x0D0F100B,},
+	{2,  1900, 0, 8,     7, 0x09090B0D, 0x0E10120B,},
+	{2,  2200, 0, 8,     8, 0x090A0C0F, 0x1012130C,},
 	{}
 };
 
diff --git a/board/freescale/ls2080aqds/ls2080aqds.c b/board/freescale/ls2080aqds/ls2080aqds.c
index b3bd40afb7..897793d85b 100644
--- a/board/freescale/ls2080aqds/ls2080aqds.c
+++ b/board/freescale/ls2080aqds/ls2080aqds.c
@@ -282,7 +282,9 @@ void fdt_fixup_board_enet(void *fdt)
 #ifdef CONFIG_OF_BOARD_SETUP
 int ft_board_setup(void *blob, bd_t *bd)
 {
+#ifdef CONFIG_FSL_MC_ENET
 	int err;
+#endif
 	u64 base[CONFIG_NR_DRAM_BANKS];
 	u64 size[CONFIG_NR_DRAM_BANKS];