diff options
Diffstat (limited to 'board/freescale/m5329evb/m5329evb.c')
| -rw-r--r-- | board/freescale/m5329evb/m5329evb.c | 285 |
1 files changed, 3 insertions, 282 deletions
diff --git a/board/freescale/m5329evb/m5329evb.c b/board/freescale/m5329evb/m5329evb.c index 4ccea30d61..07a02c2729 100644 --- a/board/freescale/m5329evb/m5329evb.c +++ b/board/freescale/m5329evb/m5329evb.c @@ -24,13 +24,9 @@ * MA 02111-1307 USA */ -#include <common.h> -#include <asm/fec.h> -#include <asm/m5329.h> -#include <asm/immap_5329.h> - #include <config.h> -#include <net.h> +#include <common.h> +#include <asm/immap.h> DECLARE_GLOBAL_DATA_PTR; @@ -97,280 +93,5 @@ void sync(void) /* This sync function is PowerPC intruction, coldfire does not have this instruction. Dummy function */ } -#endif - -#if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(CONFIG_NET_MULTI) -#undef MII_DEBUG -#undef ET_DEBUG - -int fecpin_setclear(struct eth_device *dev, int setclear) -{ - volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; - - if (setclear) { - gpio->par_fec |= GPIO_PAR_FEC_7W_FEC | GPIO_PAR_FEC_MII_FEC; - gpio->par_feci2c |= - GPIO_PAR_FECI2C_MDC_EMDC | GPIO_PAR_FECI2C_MDIO_EMDIO; - } else { - gpio->par_fec &= ~(GPIO_PAR_FEC_7W_FEC | GPIO_PAR_FEC_MII_FEC); - gpio->par_feci2c &= - ~(GPIO_PAR_FECI2C_MDC_EMDC | GPIO_PAR_FECI2C_MDIO_EMDIO); - } - return 0; -} - -#if defined(CFG_DISCOVER_PHY) || (CONFIG_COMMANDS & CFG_CMD_MII) -#include <miiphy.h> - -/* Make MII read/write commands for the FEC. */ -#define mk_mii_read(ADDR, REG) (0x60020000 | ((ADDR << 23) | \ - (REG & 0x1f) << 18)) - -#define mk_mii_write(ADDR, REG, VAL) (0x50020000 | ((ADDR << 23) | \ - (REG & 0x1f) << 18) | \ - (VAL & 0xffff)) - -/* PHY identification */ -#define PHY_ID_LXT970 0x78100000 /* LXT970 */ -#define PHY_ID_LXT971 0x001378e0 /* LXT971 and 972 */ -#define PHY_ID_82555 0x02a80150 /* Intel 82555 */ -#define PHY_ID_QS6612 0x01814400 /* QS6612 */ -#define PHY_ID_AMD79C784 0x00225610 /* AMD 79C784 */ -#define PHY_ID_LSI80225 0x0016f870 /* LSI 80225 */ -#define PHY_ID_LSI80225B 0x0016f880 /* LSI 80225/B */ -#define PHY_ID_DP83848VV 0x20005C90 /* National 83848 */ -#define PHY_ID_DP83849 0x20005CA2 /* National 82849 */ - -#define STR_ID_LXT970 "LXT970" -#define STR_ID_LXT971 "LXT971" -#define STR_ID_82555 "Intel82555" -#define STR_ID_QS6612 "QS6612" -#define STR_ID_AMD79C784 "AMD79C784" -#define STR_ID_LSI80225 "LSI80225" -#define STR_ID_LSI80225B "LSI80225/B" -#define STR_ID_DP83848VV "N83848" -#define STR_ID_DP83849 "N83849" - -/**************************************************************************** - * mii_init -- Initialize the MII for MII command without ethernet - * This function is a subset of eth_init - **************************************************************************** - */ -void mii_reset(struct fec_info_s *info) -{ - volatile fec_t *fecp = (fec_t *) (info->miibase); - int i; - - fecp->ecr = FEC_ECR_RESET; - for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) { - udelay(1); - } - if (i == FEC_RESET_DELAY) { - printf("FEC_RESET_DELAY timeout\n"); - } -} - -/* send command to phy using mii, wait for result */ -uint mii_send(uint mii_cmd) -{ - struct fec_info_s *info; - struct eth_device *dev; - volatile fec_t *ep; - uint mii_reply; - int j = 0; - - /* retrieve from register structure */ - dev = eth_get_dev(); - info = dev->priv; - - ep = (fec_t *) info->miibase; - - ep->mmfr = mii_cmd; /* command to phy */ - - /* wait for mii complete */ - while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) { - udelay(1); - j++; - } - if (j >= MCFFEC_TOUT_LOOP) { - printf("MII not complete\n"); - return -1; - } - - mii_reply = ep->mmfr; /* result from phy */ - ep->eir = FEC_EIR_MII; /* clear MII complete */ -#ifdef ET_DEBUG - printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n", - __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply); -#endif - - return (mii_reply & 0xffff); /* data read from phy */ -} -#endif /* CFG_DISCOVER_PHY || (CONFIG_COMMANDS & CFG_CMD_MII) */ - -#if defined(CFG_DISCOVER_PHY) -int mii_discover_phy(struct eth_device *dev) -{ -#define MAX_PHY_PASSES 11 - struct fec_info_s *info = dev->priv; - int phyaddr, pass; - uint phyno, phytype; - - if (info->phyname_init) - return info->phy_addr; - - phyaddr = -1; /* didn't find a PHY yet */ - for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) { - if (pass > 1) { - /* PHY may need more time to recover from reset. - * The LXT970 needs 50ms typical, no maximum is - * specified, so wait 10ms before try again. - * With 11 passes this gives it 100ms to wake up. - */ - udelay(10000); /* wait 10ms */ - } - - for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) { - - phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1)); -#ifdef ET_DEBUG - printf("PHY type 0x%x pass %d type\n", phytype, pass); -#endif - if (phytype != 0xffff) { - phyaddr = phyno; - phytype <<= 16; - phytype |= - mii_send(mk_mii_read(phyno, PHY_PHYIDR2)); - - switch (phytype & 0xffffffff) { - case PHY_ID_DP83848VV: - strcpy(info->phy_name, - STR_ID_DP83848VV); - info->phyname_init = 1; - break; - default: - strcpy(info->phy_name, "unknown"); - info->phyname_init = 1; - break; - } - -#ifdef ET_DEBUG - printf("PHY @ 0x%x pass %d type ", phyno, pass); - switch (phytype & 0xffffffff) { - case PHY_ID_DP83848VV: - printf(STR_ID_DP83848VV); - break; - default: - printf("0x%08x\n", phytype); - break; - } -#endif - } - } - } - if (phyaddr < 0) - printf("No PHY device found.\n"); - - return phyaddr; -} -#endif /* CFG_DISCOVER_PHY */ - -void mii_init(void) -{ - volatile fec_t *fecp; - struct fec_info_s *info; - struct eth_device *dev; - int miispd = 0, i = 0; - u16 autoneg = 0; - - /* retrieve from register structure */ - dev = eth_get_dev(); - info = dev->priv; - - fecp = (fec_t *) info->miibase; - - fecpin_setclear(dev, 1); - - mii_reset(info); - - /* We use strictly polling mode only */ - fecp->eimr = 0; - - /* Clear any pending interrupt */ - fecp->eir = 0xffffffff; - - /* Set MII speed */ - miispd = (gd->bus_clk / 1000000) / 5; - fecp->mscr = miispd << 1; - - info->phy_addr = mii_discover_phy(dev); - -#define AUTONEGLINK (PHY_BMSR_AUTN_COMP | PHY_BMSR_LS) - while (i < MCFFEC_TOUT_LOOP) { - autoneg = 0; - miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg); - i++; - - if ((autoneg & AUTONEGLINK) == AUTONEGLINK) - break; - - udelay(500); - } - if (i >= MCFFEC_TOUT_LOOP) { - printf("Auto Negotiation not complete\n"); - } - - /* adapt to the half/full speed settings */ - info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16; - info->dup_spd |= miiphy_speed(dev->name, info->phy_addr); -} - -/***************************************************************************** - * Read and write a MII PHY register, routines used by MII Utilities - * - * FIXME: These routines are expected to return 0 on success, but mii_send - * does _not_ return an error code. Maybe 0xFFFF means error, i.e. - * no PHY connected... - * For now always return 0. - * FIXME: These routines only work after calling eth_init() at least once! - * Otherwise they hang in mii_send() !!! Sorry! - *****************************************************************************/ - -int mcffec_miiphy_read(char *devname, unsigned char addr, - unsigned char reg, unsigned short *value) -{ - short rdreg; /* register working value */ - -#ifdef MII_DEBUG - printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr); -#endif - rdreg = mii_send(mk_mii_read(addr, reg)); - - *value = rdreg; - -#ifdef MII_DEBUG - printf("0x%04x\n", *value); -#endif - - return 0; -} - -int mcffec_miiphy_write(char *devname, unsigned char addr, - unsigned char reg, unsigned short value) -{ - short rdreg; /* register working value */ - -#ifdef MII_DEBUG - printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr); -#endif - - rdreg = mii_send(mk_mii_write(addr, reg, value)); - -#ifdef MII_DEBUG - printf("0x%04x\n", value); -#endif - - return 0; -} +#endif /* CFG_FLASH_CFI */ -#endif /* CFG_CMD_NET, FEC_ENET & NET_MULTI */ |