diff options
Diffstat (limited to 'board/freescale/m5329evb')
| -rw-r--r-- | board/freescale/m5329evb/m5329evb.c | 28 | ||||
| -rw-r--r-- | board/freescale/m5329evb/nand.c | 14 |
2 files changed, 22 insertions, 20 deletions
diff --git a/board/freescale/m5329evb/m5329evb.c b/board/freescale/m5329evb/m5329evb.c index b4df22f1f2..1c14b83a9d 100644 --- a/board/freescale/m5329evb/m5329evb.c +++ b/board/freescale/m5329evb/m5329evb.c @@ -2,7 +2,7 @@ * (C) Copyright 2000-2003 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * - * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * Copyright (C) 2004-2007, 2012 Freescale Semiconductor, Inc. * TsiChung Liew (Tsi-Chung.Liew@freescale.com) * * See file CREDITS for list of people who contributed to this @@ -27,6 +27,7 @@ #include <config.h> #include <common.h> #include <asm/immap.h> +#include <asm/io.h> DECLARE_GLOBAL_DATA_PTR; @@ -39,7 +40,7 @@ int checkboard(void) phys_size_t initdram(int board_type) { - volatile sdram_t *sdram = (volatile sdram_t *)(MMAP_SDRAM); + sdram_t *sdram = (sdram_t *)(MMAP_SDRAM); u32 dramsize, i; dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000; @@ -50,29 +51,30 @@ phys_size_t initdram(int board_type) } i--; - sdram->cs0 = (CONFIG_SYS_SDRAM_BASE | i); - sdram->cfg1 = CONFIG_SYS_SDRAM_CFG1; - sdram->cfg2 = CONFIG_SYS_SDRAM_CFG2; + out_be32(&sdram->cs0, CONFIG_SYS_SDRAM_BASE | i); + out_be32(&sdram->cfg1, CONFIG_SYS_SDRAM_CFG1); + out_be32(&sdram->cfg2, CONFIG_SYS_SDRAM_CFG2); /* Issue PALL */ - sdram->ctrl = CONFIG_SYS_SDRAM_CTRL | 2; + out_be32(&sdram->ctrl, CONFIG_SYS_SDRAM_CTRL | 2); /* Issue LEMR */ - sdram->mode = CONFIG_SYS_SDRAM_EMOD; - sdram->mode = (CONFIG_SYS_SDRAM_MODE | 0x04000000); + out_be32(&sdram->mode, CONFIG_SYS_SDRAM_EMOD); + out_be32(&sdram->mode, CONFIG_SYS_SDRAM_MODE | 0x04000000); udelay(500); /* Issue PALL */ - sdram->ctrl = (CONFIG_SYS_SDRAM_CTRL | 2); + out_be32(&sdram->ctrl, CONFIG_SYS_SDRAM_CTRL | 2); /* Perform two refresh cycles */ - sdram->ctrl = CONFIG_SYS_SDRAM_CTRL | 4; - sdram->ctrl = CONFIG_SYS_SDRAM_CTRL | 4; + out_be32(&sdram->ctrl, CONFIG_SYS_SDRAM_CTRL | 4); + out_be32(&sdram->ctrl, CONFIG_SYS_SDRAM_CTRL | 4); - sdram->mode = CONFIG_SYS_SDRAM_MODE; + out_be32(&sdram->mode, CONFIG_SYS_SDRAM_MODE); - sdram->ctrl = (CONFIG_SYS_SDRAM_CTRL & ~0x80000000) | 0x10000c00; + out_be32(&sdram->ctrl, + (CONFIG_SYS_SDRAM_CTRL & ~0x80000000) | 0x10000c00); udelay(100); diff --git a/board/freescale/m5329evb/nand.c b/board/freescale/m5329evb/nand.c index 16025f91e2..c70c98c8a1 100644 --- a/board/freescale/m5329evb/nand.c +++ b/board/freescale/m5329evb/nand.c @@ -2,7 +2,7 @@ * (C) Copyright 2000-2003 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * - * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * Copyright (C) 2004-2007, 2012 Freescale Semiconductor, Inc. * TsiChung Liew (Tsi-Chung.Liew@freescale.com) * * See file CREDITS for list of people who contributed to this @@ -67,18 +67,18 @@ static void nand_hwcontrol(struct mtd_info *mtdinfo, int cmd, unsigned int ctrl) int board_nand_init(struct nand_chip *nand) { - volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; + gpio_t *gpio = (gpio_t *) MMAP_GPIO; /* * set up pin configuration - enabled 2nd output buffer's signals * (nand_ngpio - nCE USB1/2_PWR_EN, LATCH_GPIOs, LCD_VEEEN, etc) * to use nCE signal */ - gpio->par_timer &= ~GPIO_PAR_TIN3_TIN3; - gpio->pddr_timer |= 0x08; - gpio->ppd_timer |= 0x08; - gpio->pclrr_timer = 0; - gpio->podr_timer = 0; + clrbits_8(&gpio->par_timer, GPIO_PAR_TIN3_TIN3); + setbits_8(&gpio->pddr_timer, 0x08); + setbits_8(&gpio->ppd_timer, 0x08); + out_8(&gpio->pclrr_timer, 0); + out_8(&gpio->podr_timer, 0); nand->chip_delay = 60; nand->ecc.mode = NAND_ECC_SOFT; |