diff options
Diffstat (limited to 'board/freescale/mx53evk/mx53evk.c')
| -rw-r--r-- | board/freescale/mx53evk/mx53evk.c | 289 |
1 files changed, 83 insertions, 206 deletions
diff --git a/board/freescale/mx53evk/mx53evk.c b/board/freescale/mx53evk/mx53evk.c index 1273501476..727ad65c3e 100644 --- a/board/freescale/mx53evk/mx53evk.c +++ b/board/freescale/mx53evk/mx53evk.c @@ -23,11 +23,10 @@ #include <common.h> #include <asm/io.h> #include <asm/arch/imx-regs.h> -#include <asm/arch/mx5x_pins.h> #include <asm/arch/sys_proto.h> #include <asm/arch/crm_regs.h> #include <asm/arch/clock.h> -#include <asm/arch/iomux.h> +#include <asm/arch/iomux-mx53.h> #include <asm/errno.h> #include <asm/imx-common/boot_mode.h> #include <netdev.h> @@ -49,69 +48,42 @@ int dram_init(void) return 0; } +#define UART_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_DSE_HIGH | \ + PAD_CTL_PUS_100K_UP | PAD_CTL_ODE) + static void setup_iomux_uart(void) { - /* UART1 RXD */ - mxc_request_iomux(MX53_PIN_CSI0_D11, IOMUX_CONFIG_ALT2); - mxc_iomux_set_pad(MX53_PIN_CSI0_D11, - PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | - PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | - PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PU | - PAD_CTL_ODE_OPENDRAIN_ENABLE); - mxc_iomux_set_input(MX53_UART1_IPP_UART_RXD_MUX_SELECT_INPUT, 0x1); - - /* UART1 TXD */ - mxc_request_iomux(MX53_PIN_CSI0_D10, IOMUX_CONFIG_ALT2); - mxc_iomux_set_pad(MX53_PIN_CSI0_D10, - PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | - PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | - PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PU | - PAD_CTL_ODE_OPENDRAIN_ENABLE); + static const iomux_v3_cfg_t uart_pads[] = { + NEW_PAD_CTRL(MX53_PAD_CSI0_DAT11__UART1_RXD_MUX, UART_PAD_CTRL), + NEW_PAD_CTRL(MX53_PAD_CSI0_DAT10__UART1_TXD_MUX, UART_PAD_CTRL), + }; + + imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads)); } +#define I2C_PAD_CTRL (PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | \ + PAD_CTL_HYS | PAD_CTL_ODE) + static void setup_i2c(unsigned int port_number) { + static const iomux_v3_cfg_t i2c1_pads[] = { + NEW_PAD_CTRL(MX53_PAD_CSI0_DAT8__I2C1_SDA, I2C_PAD_CTRL), + NEW_PAD_CTRL(MX53_PAD_CSI0_DAT9__I2C1_SCL, I2C_PAD_CTRL), + }; + + static const iomux_v3_cfg_t i2c2_pads[] = { + NEW_PAD_CTRL(MX53_PAD_KEY_ROW3__I2C2_SDA, I2C_PAD_CTRL), + NEW_PAD_CTRL(MX53_PAD_KEY_COL3__I2C2_SCL, I2C_PAD_CTRL), + }; + switch (port_number) { case 0: - /* i2c1 SDA */ - mxc_request_iomux(MX53_PIN_CSI0_D8, - IOMUX_CONFIG_ALT5 | IOMUX_CONFIG_SION); - mxc_iomux_set_input(MX53_I2C1_IPP_SDA_IN_SELECT_INPUT, - INPUT_CTL_PATH0); - mxc_iomux_set_pad(MX53_PIN_CSI0_D8, - PAD_CTL_SRE_FAST | PAD_CTL_DRV_HIGH | - PAD_CTL_100K_PU | PAD_CTL_HYS_ENABLE | - PAD_CTL_ODE_OPENDRAIN_ENABLE); - /* i2c1 SCL */ - mxc_request_iomux(MX53_PIN_CSI0_D9, - IOMUX_CONFIG_ALT5 | IOMUX_CONFIG_SION); - mxc_iomux_set_input(MX53_I2C1_IPP_SCL_IN_SELECT_INPUT, - INPUT_CTL_PATH0); - mxc_iomux_set_pad(MX53_PIN_CSI0_D9, - PAD_CTL_SRE_FAST | PAD_CTL_DRV_HIGH | - PAD_CTL_100K_PU | PAD_CTL_HYS_ENABLE | - PAD_CTL_ODE_OPENDRAIN_ENABLE); + imx_iomux_v3_setup_multiple_pads(i2c1_pads, + ARRAY_SIZE(i2c1_pads)); break; case 1: - /* i2c2 SDA */ - mxc_request_iomux(MX53_PIN_KEY_ROW3, - IOMUX_CONFIG_ALT4 | IOMUX_CONFIG_SION); - mxc_iomux_set_input(MX53_I2C2_IPP_SDA_IN_SELECT_INPUT, - INPUT_CTL_PATH0); - mxc_iomux_set_pad(MX53_PIN_KEY_ROW3, - PAD_CTL_SRE_FAST | PAD_CTL_DRV_HIGH | - PAD_CTL_100K_PU | PAD_CTL_HYS_ENABLE | - PAD_CTL_ODE_OPENDRAIN_ENABLE); - - /* i2c2 SCL */ - mxc_request_iomux(MX53_PIN_KEY_COL3, - IOMUX_CONFIG_ALT4 | IOMUX_CONFIG_SION); - mxc_iomux_set_input(MX53_I2C2_IPP_SCL_IN_SELECT_INPUT, - INPUT_CTL_PATH0); - mxc_iomux_set_pad(MX53_PIN_KEY_COL3, - PAD_CTL_SRE_FAST | PAD_CTL_DRV_HIGH | - PAD_CTL_100K_PU | PAD_CTL_HYS_ENABLE | - PAD_CTL_ODE_OPENDRAIN_ENABLE); + imx_iomux_v3_setup_multiple_pads(i2c2_pads, + ARRAY_SIZE(i2c2_pads)); break; default: printf("Warning: Wrong I2C port number\n"); @@ -160,54 +132,26 @@ void power_init(void) static void setup_iomux_fec(void) { - /*FEC_MDIO*/ - mxc_request_iomux(MX53_PIN_FEC_MDIO, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX53_PIN_FEC_MDIO, - PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | - PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | - PAD_CTL_22K_PU | PAD_CTL_ODE_OPENDRAIN_ENABLE); - mxc_iomux_set_input(MX53_FEC_FEC_MDI_SELECT_INPUT, 0x1); - - /*FEC_MDC*/ - mxc_request_iomux(MX53_PIN_FEC_MDC, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX53_PIN_FEC_MDC, PAD_CTL_DRV_HIGH); - - /* FEC RXD1 */ - mxc_request_iomux(MX53_PIN_FEC_RXD1, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX53_PIN_FEC_RXD1, - PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE); - - /* FEC RXD0 */ - mxc_request_iomux(MX53_PIN_FEC_RXD0, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX53_PIN_FEC_RXD0, - PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE); - - /* FEC TXD1 */ - mxc_request_iomux(MX53_PIN_FEC_TXD1, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX53_PIN_FEC_TXD1, PAD_CTL_DRV_HIGH); - - /* FEC TXD0 */ - mxc_request_iomux(MX53_PIN_FEC_TXD0, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX53_PIN_FEC_TXD0, PAD_CTL_DRV_HIGH); - - /* FEC TX_EN */ - mxc_request_iomux(MX53_PIN_FEC_TX_EN, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX53_PIN_FEC_TX_EN, PAD_CTL_DRV_HIGH); - - /* FEC TX_CLK */ - mxc_request_iomux(MX53_PIN_FEC_REF_CLK, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX53_PIN_FEC_REF_CLK, - PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE); - - /* FEC RX_ER */ - mxc_request_iomux(MX53_PIN_FEC_RX_ER, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX53_PIN_FEC_RX_ER, - PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE); - - /* FEC CRS */ - mxc_request_iomux(MX53_PIN_FEC_CRS_DV, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX53_PIN_FEC_CRS_DV, - PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE); + static const iomux_v3_cfg_t fec_pads[] = { + NEW_PAD_CTRL(MX53_PAD_FEC_MDIO__FEC_MDIO, PAD_CTL_HYS | + PAD_CTL_DSE_HIGH | PAD_CTL_PUS_22K_UP | PAD_CTL_ODE), + NEW_PAD_CTRL(MX53_PAD_FEC_MDC__FEC_MDC, PAD_CTL_DSE_HIGH), + NEW_PAD_CTRL(MX53_PAD_FEC_RXD1__FEC_RDATA_1, + PAD_CTL_HYS | PAD_CTL_PKE), + NEW_PAD_CTRL(MX53_PAD_FEC_RXD0__FEC_RDATA_0, + PAD_CTL_HYS | PAD_CTL_PKE), + NEW_PAD_CTRL(MX53_PAD_FEC_TXD1__FEC_TDATA_1, PAD_CTL_DSE_HIGH), + NEW_PAD_CTRL(MX53_PAD_FEC_TXD0__FEC_TDATA_0, PAD_CTL_DSE_HIGH), + NEW_PAD_CTRL(MX53_PAD_FEC_TX_EN__FEC_TX_EN, PAD_CTL_DSE_HIGH), + NEW_PAD_CTRL(MX53_PAD_FEC_REF_CLK__FEC_TX_CLK, + PAD_CTL_HYS | PAD_CTL_PKE), + NEW_PAD_CTRL(MX53_PAD_FEC_RX_ER__FEC_RX_ER, + PAD_CTL_HYS | PAD_CTL_PKE), + NEW_PAD_CTRL(MX53_PAD_FEC_CRS_DV__FEC_RX_DV, + PAD_CTL_HYS | PAD_CTL_PKE), + }; + + imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads)); } #ifdef CONFIG_FSL_ESDHC @@ -221,9 +165,9 @@ int board_mmc_getcd(struct mmc *mmc) struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; int ret; - mxc_request_iomux(MX53_PIN_EIM_DA11, IOMUX_CONFIG_ALT1); + imx_iomux_v3_setup_pad(MX53_PAD_EIM_DA11__GPIO3_11); gpio_direction_input(IMX_GPIO_NR(3, 11)); - mxc_request_iomux(MX53_PIN_EIM_DA13, IOMUX_CONFIG_ALT1); + imx_iomux_v3_setup_pad(MX53_PAD_EIM_DA13__GPIO3_13); gpio_direction_input(IMX_GPIO_NR(3, 13)); if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR) @@ -234,8 +178,38 @@ int board_mmc_getcd(struct mmc *mmc) return ret; } +#define SD_CMD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_DSE_HIGH | \ + PAD_CTL_PUS_100K_UP) +#define SD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | \ + PAD_CTL_DSE_HIGH) + int board_mmc_init(bd_t *bis) { + static const iomux_v3_cfg_t sd1_pads[] = { + NEW_PAD_CTRL(MX53_PAD_SD1_CMD__ESDHC1_CMD, SD_CMD_PAD_CTRL), + NEW_PAD_CTRL(MX53_PAD_SD1_CLK__ESDHC1_CLK, SD_PAD_CTRL), + NEW_PAD_CTRL(MX53_PAD_SD1_DATA0__ESDHC1_DAT0, SD_PAD_CTRL), + NEW_PAD_CTRL(MX53_PAD_SD1_DATA1__ESDHC1_DAT1, SD_PAD_CTRL), + NEW_PAD_CTRL(MX53_PAD_SD1_DATA2__ESDHC1_DAT2, SD_PAD_CTRL), + NEW_PAD_CTRL(MX53_PAD_SD1_DATA3__ESDHC1_DAT3, SD_PAD_CTRL), + MX53_PAD_EIM_DA13__GPIO3_13, + }; + + static const iomux_v3_cfg_t sd2_pads[] = { + NEW_PAD_CTRL(MX53_PAD_PATA_RESET_B__ESDHC3_CMD, + SD_CMD_PAD_CTRL), + NEW_PAD_CTRL(MX53_PAD_PATA_IORDY__ESDHC3_CLK, SD_PAD_CTRL), + NEW_PAD_CTRL(MX53_PAD_PATA_DATA8__ESDHC3_DAT0, SD_PAD_CTRL), + NEW_PAD_CTRL(MX53_PAD_PATA_DATA9__ESDHC3_DAT1, SD_PAD_CTRL), + NEW_PAD_CTRL(MX53_PAD_PATA_DATA10__ESDHC3_DAT2, SD_PAD_CTRL), + NEW_PAD_CTRL(MX53_PAD_PATA_DATA11__ESDHC3_DAT3, SD_PAD_CTRL), + NEW_PAD_CTRL(MX53_PAD_PATA_DATA0__ESDHC3_DAT4, SD_PAD_CTRL), + NEW_PAD_CTRL(MX53_PAD_PATA_DATA1__ESDHC3_DAT5, SD_PAD_CTRL), + NEW_PAD_CTRL(MX53_PAD_PATA_DATA2__ESDHC3_DAT6, SD_PAD_CTRL), + NEW_PAD_CTRL(MX53_PAD_PATA_DATA3__ESDHC3_DAT7, SD_PAD_CTRL), + MX53_PAD_EIM_DA11__GPIO3_11, + }; + u32 index; s32 status = 0; @@ -245,109 +219,12 @@ int board_mmc_init(bd_t *bis) for (index = 0; index < CONFIG_SYS_FSL_ESDHC_NUM; index++) { switch (index) { case 0: - mxc_request_iomux(MX53_PIN_SD1_CMD, IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_SD1_CLK, IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_SD1_DATA0, - IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_SD1_DATA1, - IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_SD1_DATA2, - IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_SD1_DATA3, - IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_EIM_DA13, - IOMUX_CONFIG_ALT1); - - mxc_iomux_set_pad(MX53_PIN_SD1_CMD, - PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | - PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | - PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PU); - mxc_iomux_set_pad(MX53_PIN_SD1_CLK, - PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | - PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU | - PAD_CTL_DRV_HIGH); - mxc_iomux_set_pad(MX53_PIN_SD1_DATA0, - PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | - PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | - PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); - mxc_iomux_set_pad(MX53_PIN_SD1_DATA1, - PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | - PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | - PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); - mxc_iomux_set_pad(MX53_PIN_SD1_DATA2, - PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | - PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | - PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); - mxc_iomux_set_pad(MX53_PIN_SD1_DATA3, - PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | - PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | - PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); + imx_iomux_v3_setup_multiple_pads(sd1_pads, + ARRAY_SIZE(sd1_pads)); break; case 1: - mxc_request_iomux(MX53_PIN_ATA_RESET_B, - IOMUX_CONFIG_ALT2); - mxc_request_iomux(MX53_PIN_ATA_IORDY, - IOMUX_CONFIG_ALT2); - mxc_request_iomux(MX53_PIN_ATA_DATA8, - IOMUX_CONFIG_ALT4); - mxc_request_iomux(MX53_PIN_ATA_DATA9, - IOMUX_CONFIG_ALT4); - mxc_request_iomux(MX53_PIN_ATA_DATA10, - IOMUX_CONFIG_ALT4); - mxc_request_iomux(MX53_PIN_ATA_DATA11, - IOMUX_CONFIG_ALT4); - mxc_request_iomux(MX53_PIN_ATA_DATA0, - IOMUX_CONFIG_ALT4); - mxc_request_iomux(MX53_PIN_ATA_DATA1, - IOMUX_CONFIG_ALT4); - mxc_request_iomux(MX53_PIN_ATA_DATA2, - IOMUX_CONFIG_ALT4); - mxc_request_iomux(MX53_PIN_ATA_DATA3, - IOMUX_CONFIG_ALT4); - mxc_request_iomux(MX53_PIN_EIM_DA11, - IOMUX_CONFIG_ALT1); - - mxc_iomux_set_pad(MX53_PIN_ATA_RESET_B, - PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | - PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | - PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PU); - mxc_iomux_set_pad(MX53_PIN_ATA_IORDY, - PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | - PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU | - PAD_CTL_DRV_HIGH); - mxc_iomux_set_pad(MX53_PIN_ATA_DATA8, - PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | - PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | - PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); - mxc_iomux_set_pad(MX53_PIN_ATA_DATA9, - PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | - PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | - PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); - mxc_iomux_set_pad(MX53_PIN_ATA_DATA10, - PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | - PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | - PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); - mxc_iomux_set_pad(MX53_PIN_ATA_DATA11, - PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | - PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | - PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); - mxc_iomux_set_pad(MX53_PIN_ATA_DATA0, - PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | - PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | - PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); - mxc_iomux_set_pad(MX53_PIN_ATA_DATA1, - PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | - PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | - PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); - mxc_iomux_set_pad(MX53_PIN_ATA_DATA2, - PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | - PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | - PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); - mxc_iomux_set_pad(MX53_PIN_ATA_DATA3, - PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | - PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | - PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); - + imx_iomux_v3_setup_multiple_pads(sd2_pads, + ARRAY_SIZE(sd2_pads)); break; default: printf("Warning: you configured more ESDHC controller" |