diff options
Diffstat (limited to 'board/freescale/mx6sabresd')
| -rw-r--r-- | board/freescale/mx6sabresd/mx6sabresd.c | 13 |
1 files changed, 5 insertions, 8 deletions
diff --git a/board/freescale/mx6sabresd/mx6sabresd.c b/board/freescale/mx6sabresd/mx6sabresd.c index bb2dd9624b..23f8f6b76f 100644 --- a/board/freescale/mx6sabresd/mx6sabresd.c +++ b/board/freescale/mx6sabresd/mx6sabresd.c @@ -753,10 +753,11 @@ const struct mx6_mmdc_calibration mx6_mmcd_calib = { .p1_mpwrdlctl = 0x48254A36, }; +/* MT41K128M16JT-125 */ static struct mx6_ddr3_cfg mem_ddr = { .mem_speed = 1600, - .density = 4, - .width = 64, + .density = 2, + .width = 16, .banks = 8, .rowaddr = 14, .coladdr = 10, @@ -798,18 +799,14 @@ static void spl_dram_init(void) { struct mx6_ddr_sysinfo sysinfo = { /* width of data bus:0=16,1=32,2=64 */ - .dsize = mem_ddr.width/32, + .dsize = 2, /* config for full 4GB range so that get_mem_size() works */ .cs_density = 32, /* 32Gb per CS */ /* single chip select */ .ncs = 1, .cs1_mirror = 0, .rtt_wr = 1 /*DDR3_RTT_60_OHM*/, /* RTT_Wr = RZQ/4 */ -#ifdef RTT_NOM_120OHM - .rtt_nom = 2 /*DDR3_RTT_120_OHM*/, /* RTT_Nom = RZQ/2 */ -#else .rtt_nom = 1 /*DDR3_RTT_60_OHM*/, /* RTT_Nom = RZQ/4 */ -#endif .walat = 1, /* Write additional latency */ .ralat = 5, /* Read additional latency */ .mif3_mode = 3, /* Command prediction working mode */ @@ -818,7 +815,7 @@ static void spl_dram_init(void) .rst_to_cke = 0x23, /* 33 cycles, 500us (JEDEC default) */ }; - mx6dq_dram_iocfg(mem_ddr.width, &mx6_ddr_ioregs, &mx6_grp_ioregs); + mx6dq_dram_iocfg(64, &mx6_ddr_ioregs, &mx6_grp_ioregs); mx6_dram_cfg(&sysinfo, &mx6_mmcd_calib, &mem_ddr); } |