diff options
Diffstat (limited to 'board/freescale/p2041rdb/cpld.c')
| -rw-r--r-- | board/freescale/p2041rdb/cpld.c | 171 |
1 files changed, 171 insertions, 0 deletions
diff --git a/board/freescale/p2041rdb/cpld.c b/board/freescale/p2041rdb/cpld.c new file mode 100644 index 0000000000..8e1f46e790 --- /dev/null +++ b/board/freescale/p2041rdb/cpld.c @@ -0,0 +1,171 @@ +/** + * Copyright 2011 Freescale Semiconductor + * Author: Mingkai Hu <Mingkai.hu@freescale.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + * This file provides support for the board-specific CPLD used on some Freescale + * reference boards. + * + * The following macros need to be defined: + * + * CPLD_BASE - The virtual address of the base of the CPLD register map + * + */ + +#include <common.h> +#include <command.h> +#include <asm/io.h> + +#include "cpld.h" + +static u8 __cpld_read(unsigned int reg) +{ + void *p = (void *)CPLD_BASE; + + return in_8(p + reg); +} +u8 cpld_read(unsigned int reg) __attribute__((weak, alias("__cpld_read"))); + +static void __cpld_write(unsigned int reg, u8 value) +{ + void *p = (void *)CPLD_BASE; + + out_8(p + reg, value); +} +void cpld_write(unsigned int reg, u8 value) + __attribute__((weak, alias("__cpld_write"))); + +/* + * Reset the board. This honors the por_cfg registers. + */ +void __cpld_reset(void) +{ + CPLD_WRITE(system_rst, 1); +} +void cpld_reset(void) __attribute__((weak, alias("__cpld_reset"))); + +/** + * Set the boot bank to the alternate bank + */ +void __cpld_set_altbank(void) +{ + CPLD_WRITE(fbank_sel, 1); +} +void cpld_set_altbank(void) + __attribute__((weak, alias("__cpld_set_altbank"))); + +/** + * Set the boot bank to the default bank + */ +void __cpld_clear_altbank(void) +{ + CPLD_WRITE(fbank_sel, 0); +} +void cpld_clear_altbank(void) + __attribute__((weak, alias("__cpld_clear_altbank"))); + +#ifdef DEBUG +static void cpld_dump_regs(void) +{ + printf("cpld_ver = 0x%02x\n", CPLD_READ(cpld_ver)); + printf("cpld_ver_sub = 0x%02x\n", CPLD_READ(cpld_ver_sub)); + printf("pcba_ver = 0x%02x\n", CPLD_READ(pcba_ver)); + printf("system_rst = 0x%02x\n", CPLD_READ(system_rst)); + printf("wd_cfg = 0x%02x\n", CPLD_READ(wd_cfg)); + printf("sw_ctl_on = 0x%02x\n", CPLD_READ(sw_ctl_on)); + printf("por_cfg = 0x%02x\n", CPLD_READ(por_cfg)); + printf("switch_strobe = 0x%02x\n", CPLD_READ(switch_strobe)); + printf("jtag_sel = 0x%02x\n", CPLD_READ(jtag_sel)); + printf("sdbank1_clk = 0x%02x\n", CPLD_READ(sdbank1_clk)); + printf("sdbank2_clk = 0x%02x\n", CPLD_READ(sdbank2_clk)); + printf("fbank_sel = 0x%02x\n", CPLD_READ(fbank_sel)); + printf("serdes_mux = 0x%02x\n", CPLD_READ(serdes_mux)); + printf("SW[2] = 0x%02x\n", in_8(&CPLD_SW(2))); + putc('\n'); +} +#endif + +int cpld_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + int rc = 0; + unsigned int i; + + if (argc <= 1) + return cmd_usage(cmdtp); + + if (strcmp(argv[1], "reset") == 0) { + if (strcmp(argv[2], "altbank") == 0) + cpld_set_altbank(); + else + cpld_clear_altbank(); + + cpld_reset(); + } else if (strcmp(argv[1], "watchdog") == 0) { + static char *period[8] = {"1ms", "10ms", "30ms", "disable", + "100ms", "1s", "10s", "60s"}; + for (i = 0; i < ARRAY_SIZE(period); i++) { + if (strcmp(argv[2], period[i]) == 0) + CPLD_WRITE(wd_cfg, i); + } + } else if (strcmp(argv[1], "lane_mux") == 0) { + u32 lane = simple_strtoul(argv[2], NULL, 16); + u8 val = (u8)simple_strtoul(argv[3], NULL, 16); + u8 reg = CPLD_READ(serdes_mux); + + switch (lane) { + case 0x6: + reg &= ~SERDES_MUX_LANE_6_MASK; + reg |= val << SERDES_MUX_LANE_6_SHIFT; + break; + case 0xa: + reg &= ~SERDES_MUX_LANE_A_MASK; + reg |= val << SERDES_MUX_LANE_A_SHIFT; + break; + case 0xc: + reg &= ~SERDES_MUX_LANE_C_MASK; + reg |= val << SERDES_MUX_LANE_C_SHIFT; + break; + case 0xd: + reg &= ~SERDES_MUX_LANE_D_MASK; + reg |= val << SERDES_MUX_LANE_D_SHIFT; + break; + default: + printf("Invalid value\n"); + break; + } + + CPLD_WRITE(serdes_mux, reg); +#ifdef DEBUG + } else if (strcmp(argv[1], "dump") == 0) { + cpld_dump_regs(); +#endif + } else + rc = cmd_usage(cmdtp); + + return rc; +} + +U_BOOT_CMD( + cpld_cmd, CONFIG_SYS_MAXARGS, 1, cpld_cmd, + "Reset the board or pin mulexing selection using the CPLD sequencer", + "reset - hard reset to default bank\n" + "cpld_cmd reset altbank - reset to alternate bank\n" + "cpld_cmd watchdog <watchdog_period> - set the watchdog period\n" + " period: 1ms 10ms 30ms 100ms 1s 10s 60s disable\n" + "cpld_cmd lane_mux <lane> <mux_value> - set multiplexed lane pin\n" + " lane 6: 0 -> slot1 (Default)\n" + " 1 -> SGMII\n" + " lane a: 0 -> slot2 (Default)\n" + " 1 -> AURORA\n" + " lane c: 0 -> slot2 (Default)\n" + " 1 -> SATA0\n" + " lane d: 0 -> slot2 (Default)\n" + " 1 -> SATA1\n" +#ifdef DEBUG + "cpld_cmd dump - display the CPLD registers\n" +#endif + ); |