5 files changed, 27 insertions, 78 deletions
diff --git a/board/freescale/imx8qm_mek/imx8qm_mek.c b/board/freescale/imx8qm_mek/imx8qm_mek.c
index e69efc4dd6..b7a609b097 100644
--- a/board/freescale/imx8qm_mek/imx8qm_mek.c
+++ b/board/freescale/imx8qm_mek/imx8qm_mek.c
@@ -34,21 +34,11 @@ static void setup_iomux_uart(void)
 
 int board_early_init_f(void)
 {
+	sc_pm_clock_rate_t rate = SC_80MHZ;
 	int ret;
-	/* Set UART0 clock root to 80 MHz */
-	sc_pm_clock_rate_t rate = 80000000;
-
-	/* Power up UART0 */
-	ret = sc_pm_set_resource_power_mode(-1, SC_R_UART_0, SC_PM_PW_MODE_ON);
-	if (ret)
-		return ret;
 
-	ret = sc_pm_set_clock_rate(-1, SC_R_UART_0, 2, &rate);
-	if (ret)
-		return ret;
-
-	/* Enable UART0 clock root */
-	ret = sc_pm_clock_enable(-1, SC_R_UART_0, 2, true, false);
+	/* Set UART0 clock root to 80 MHz */
+	ret = sc_pm_setup_uart(SC_R_UART_0, rate);
 	if (ret)
 		return ret;
 
@@ -88,19 +78,6 @@ int board_phy_config(struct phy_device *phydev)
 }
 #endif
 
-void build_info(void)
-{
-	u32 sc_build = 0, sc_commit = 0;
-
-	/* Get SCFW build and commit id */
-	sc_misc_build_info(-1, &sc_build, &sc_commit);
-	if (!sc_build) {
-		printf("SCFW does not support build info\n");
-		sc_commit = 0; /* Display 0 when the build info is not supported*/
-	}
-	printf("Build: SCFW %x\n", sc_commit);
-}
-
 int checkboard(void)
 {
 	puts("Board: iMX8QM MEK\n");
diff --git a/board/freescale/imx8qxp_mek/imx8qxp_mek.c b/board/freescale/imx8qxp_mek/imx8qxp_mek.c
index 120731422c..3cf73e1ab6 100644
--- a/board/freescale/imx8qxp_mek/imx8qxp_mek.c
+++ b/board/freescale/imx8qxp_mek/imx8qxp_mek.c
@@ -40,21 +40,11 @@ static void setup_iomux_uart(void)
 
 int board_early_init_f(void)
 {
+	sc_pm_clock_rate_t rate = SC_80MHZ;
 	int ret;
-	/* Set UART0 clock root to 80 MHz */
-	sc_pm_clock_rate_t rate = 80000000;
-
-	/* Power up UART0 */
-	ret = sc_pm_set_resource_power_mode(-1, SC_R_UART_0, SC_PM_PW_MODE_ON);
-	if (ret)
-		return ret;
 
-	ret = sc_pm_set_clock_rate(-1, SC_R_UART_0, 2, &rate);
-	if (ret)
-		return ret;
-
-	/* Enable UART0 clock root */
-	ret = sc_pm_clock_enable(-1, SC_R_UART_0, 2, true, false);
+	/* Set UART0 clock root to 80 MHz */
+	ret = sc_pm_setup_uart(SC_R_UART_0, rate);
 	if (ret)
 		return ret;
 
@@ -104,19 +94,6 @@ int board_phy_config(struct phy_device *phydev)
 }
 #endif
 
-void build_info(void)
-{
-	u32 sc_build = 0, sc_commit = 0;
-
-	/* Get SCFW build and commit id */
-	sc_misc_build_info(-1, &sc_build, &sc_commit);
-	if (!sc_build) {
-		printf("SCFW does not support build info\n");
-		sc_commit = 0; /* Display 0 when the build info is not supported */
-	}
-	printf("Build: SCFW %x\n", sc_commit);
-}
-
 int checkboard(void)
 {
 	puts("Board: iMX8QXP MEK\n");
diff --git a/board/freescale/mx6sxsabresd/imximage.cfg b/board/freescale/mx6sxsabresd/imximage.cfg
index 3e94f6ab66..0354bb36e2 100644
--- a/board/freescale/mx6sxsabresd/imximage.cfg
+++ b/board/freescale/mx6sxsabresd/imximage.cfg
@@ -18,6 +18,13 @@ IMAGE_VERSION 2
 BOOT_FROM	sd
 
 /*
+ * Secure boot support
+ */
+#ifdef CONFIG_SECURE_BOOT
+CSF CONFIG_CSF_SIZE
+#endif
+
+/*
  * Device Configuration Data (DCD)
  *
  * Each entry must have the format:
diff --git a/board/freescale/mx7ulp_evk/imximage.cfg b/board/freescale/mx7ulp_evk/imximage.cfg
index a6e18d9440..43ebc23091 100644
--- a/board/freescale/mx7ulp_evk/imximage.cfg
+++ b/board/freescale/mx7ulp_evk/imximage.cfg
@@ -45,12 +45,12 @@ DATA 4   0x403f00dc 0x00000000
 DATA 4   0x403e0040 0x01000020
 DATA 4   0x403e0500 0x01000000
 DATA 4   0x403e050c 0x80808080
-DATA 4   0x403e0508 0x00140000
-DATA 4   0x403E0510 0x00000004
-DATA 4   0x403E0514 0x00000002
+DATA 4   0x403e0508 0x00160002
+DATA 4   0x403E0510 0x00000001
+DATA 4   0x403E0514 0x00000014
 DATA 4   0x403e0500 0x00000001
 CHECK_BITS_SET 4 0x403e0500 0x01000000
-DATA 4   0x403e050c 0x8080801E
+DATA 4   0x403e050c 0x8080801B
 CHECK_BITS_SET 4 0x403e050c 0x00000040
 DATA 4   0x403E0030 0x00000001
 DATA 4   0x403e0040 0x11000020
@@ -94,11 +94,6 @@ DATA 4   0x40AB0820 0x33333333
 DATA 4   0x40AB0824 0x33333333
 DATA 4   0x40AB0828 0x33333333
 
-DATA 4   0x40AB082C 0xf3333333
-DATA 4   0x40AB0830 0xf3333333
-DATA 4   0x40AB0834 0xf3333333
-DATA 4   0x40AB0838 0xf3333333
-
 DATA 4   0x40AB08C0 0x24922492
 DATA 4   0x40AB08B8 0x00000800
 
@@ -113,8 +108,8 @@ DATA 4   0x40AB0030 0x009F0E10
 DATA 4   0x40AB0040 0x0000003F
 DATA 4   0x40AB0000 0xC3190000
 
-DATA 4   0x40AB001C 0x00008050
-DATA 4   0x40AB001C 0x00008058
+DATA 4   0x40AB001C 0x00008010
+DATA 4   0x40AB001C 0x00008018
 DATA 4   0x40AB001C 0x003F8030
 DATA 4   0x40AB001C 0x003F8038
 DATA 4   0x40AB001C 0xFF0A8030
diff --git a/board/freescale/mx7ulp_evk/plugin.S b/board/freescale/mx7ulp_evk/plugin.S
index 082b2beaa3..2cc93dbdd5 100644
--- a/board/freescale/mx7ulp_evk/plugin.S
+++ b/board/freescale/mx7ulp_evk/plugin.S
@@ -1,6 +1,7 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ * Copyright 2019 NXP
  */
 
 #include <config.h>
@@ -15,13 +16,14 @@
 	str r3, [r2, #0x40]
 	ldr r3, =0x01000000
 	str r3, [r2, #0x500]
+
 	ldr r3, =0x80808080
 	str r3, [r2, #0x50c]
-	ldr r3, =0x00140000
+	ldr r3, =0x00160002
 	str r3, [r2, #0x508]
-	ldr r3, =0x00000004
+	ldr r3, =0x00000001
 	str r3, [r2, #0x510]
-	ldr r3, =0x00000002
+	ldr r3, =0x00000014
 	str r3, [r2, #0x514]
 	ldr r3, =0x00000001
 	str r3, [r2, #0x500]
@@ -33,7 +35,7 @@ wait1:
 	cmp r4, r3
 	bne wait1
 
-	ldr r3, =0x8080801E
+	ldr r3, =0x8080801B
 	str r3, [r2, #0x50c]
 
 	ldr r3, =0x00000040
@@ -132,15 +134,6 @@ wait2:
 	ldr r1, =0x33333333
 	str r1, [r0, #0x828]
 
-	ldr r1, =0xf3333333
-	str r1, [r0, #0x82c]
-	ldr r1, =0xf3333333
-	str r1, [r0, #0x830]
-	ldr r1, =0xf3333333
-	str r1, [r0, #0x834]
-	ldr r1, =0xf3333333
-	str r1, [r0, #0x838]
-
 	ldr r1, =0x24922492
 	str r1, [r0, #0x8c0]
 	ldr r1, =0x00000800
@@ -168,9 +161,9 @@ wait2:
 	ldr r1, =0xC3190000
 	str r1, [r0, #0x0]
 
-	ldr r1, =0x00008050
+	ldr r1, =0x00008010
 	str r1, [r0, #0x1c]
-	ldr r1, =0x00008058
+	ldr r1, =0x00008018
 	str r1, [r0, #0x1c]
 	ldr r1, =0x003F8030
 	str r1, [r0, #0x1c]