diff options
Diffstat (limited to 'board/gateworks')
| -rw-r--r-- | board/gateworks/gw_ventana/gw_ventana.c | 228 |
1 files changed, 228 insertions, 0 deletions
diff --git a/board/gateworks/gw_ventana/gw_ventana.c b/board/gateworks/gw_ventana/gw_ventana.c index 70395ac91d..7d569ad625 100644 --- a/board/gateworks/gw_ventana/gw_ventana.c +++ b/board/gateworks/gw_ventana/gw_ventana.c @@ -491,14 +491,54 @@ int imx6_pcie_toggle_reset(void) * GPIO's as PERST# signals for its downstream ports - configure the GPIO's * properly and assert reset for 100ms. */ +#define MAX_PCI_DEVS 32 +struct pci_dev { + pci_dev_t devfn; + unsigned short vendor; + unsigned short device; + unsigned short class; + unsigned short busno; /* subbordinate busno */ + struct pci_dev *ppar; +}; +struct pci_dev pci_devs[MAX_PCI_DEVS]; +int pci_devno; +int pci_bridgeno; + void board_pci_fixup_dev(struct pci_controller *hose, pci_dev_t dev, unsigned short vendor, unsigned short device, unsigned short class) { + int i; u32 dw; + struct pci_dev *pdev = &pci_devs[pci_devno++]; debug("%s: %02d:%02d.%02d: %04x:%04x\n", __func__, PCI_BUS(dev), PCI_DEV(dev), PCI_FUNC(dev), vendor, device); + + /* store array of devs for later use in device-tree fixup */ + pdev->devfn = dev; + pdev->vendor = vendor; + pdev->device = device; + pdev->class = class; + pdev->ppar = NULL; + if (class == PCI_CLASS_BRIDGE_PCI) + pdev->busno = ++pci_bridgeno; + else + pdev->busno = 0; + + /* fixup RC - it should be 00:00.0 not 00:01.0 */ + if (PCI_BUS(dev) == 0) + pdev->devfn = 0; + + /* find dev's parent */ + for (i = 0; i < pci_devno; i++) { + if (pci_devs[i].busno == PCI_BUS(pdev->devfn)) { + pdev->ppar = &pci_devs[i]; + break; + } + } + + /* assert downstream PERST# */ if (vendor == PCI_VENDOR_ID_PLX && (device & 0xfff0) == 0x8600 && PCI_DEV(dev) == 0 && PCI_FUNC(dev) == 0) { @@ -802,6 +842,189 @@ static inline void ft_delprop_path(void *blob, const char *path, } } +#if defined(CONFIG_CMD_PCI) +#define PCI_ID(x) ( \ + (PCI_BUS(x->devfn)<<16)| \ + (PCI_DEV(x->devfn)<<11)| \ + (PCI_FUNC(x->devfn)<<8) \ + ) +#define PCIE_PATH "/soc/pcie@0x01000000" +int fdt_add_pci_node(void *blob, int par, struct pci_dev *dev) +{ + uint32_t reg[5]; + char node[32]; + int np; + + sprintf(node, "pcie@%d,%d,%d", PCI_BUS(dev->devfn), + PCI_DEV(dev->devfn), PCI_FUNC(dev->devfn)); + + np = fdt_subnode_offset(blob, par, node); + if (np >= 0) + return np; + np = fdt_add_subnode(blob, par, node); + if (np < 0) { + printf(" %s failed: no space\n", __func__); + return np; + } + + memset(reg, 0, sizeof(reg)); + reg[0] = cpu_to_fdt32(PCI_ID(dev)); + fdt_setprop(blob, np, "reg", reg, sizeof(reg)); + + return np; +} + +/* build a path of nested PCI devs for all bridges passed through */ +int fdt_add_pci_path(void *blob, struct pci_dev *dev) +{ + struct pci_dev *bridges[MAX_PCI_DEVS]; + int k, np; + + /* build list of parents */ + np = fdt_path_offset(blob, PCIE_PATH); + if (np < 0) + return np; + + k = 0; + while (dev) { + bridges[k++] = dev; + dev = dev->ppar; + }; + + /* now add them the to DT in reverse order */ + while (k--) { + np = fdt_add_pci_node(blob, np, bridges[k]); + if (np < 0) + break; + } + + return np; +} + +/* + * The GW16082 has a hardware errata errata such that it's + * INTA/B/C/D are mis-mapped to its four slots (slot12-15). Because + * of this normal PCI interrupt swizzling will not work so we will + * provide an irq-map via device-tree. + */ +int fdt_fixup_gw16082(void *blob, int np, struct pci_dev *dev) +{ + int len; + int host; + uint32_t imap_new[8*4*4]; + const uint32_t *imap; + uint32_t irq[4]; + uint32_t reg[4]; + int i; + + /* build irq-map based on host controllers map */ + host = fdt_path_offset(blob, PCIE_PATH); + if (host < 0) { + printf(" %s failed: missing host\n", __func__); + return host; + } + + /* use interrupt data from root complex's node */ + imap = fdt_getprop(blob, host, "interrupt-map", &len); + if (!imap || len != 128) { + printf(" %s failed: invalid interrupt-map\n", + __func__); + return -FDT_ERR_NOTFOUND; + } + + /* obtain irq's of host controller in pin order */ + for (i = 0; i < 4; i++) + irq[(fdt32_to_cpu(imap[(i*8)+3])-1)%4] = imap[(i*8)+6]; + + /* + * determine number of swizzles necessary: + * For each bridge we pass through we need to swizzle + * the number of the slot we are on. + */ + struct pci_dev *d; + int b; + b = 0; + d = dev->ppar; + while(d && d->ppar) { + b += PCI_DEV(d->devfn); + d = d->ppar; + } + + /* create new irq mappings for slots12-15 + * <skt> <idsel> <slot> <skt-inta> <skt-intb> + * J3 AD28 12 INTD INTA + * J4 AD29 13 INTC INTD + * J5 AD30 14 INTB INTC + * J2 AD31 15 INTA INTB + */ + for (i = 0; i < 4; i++) { + /* addr matches bus:dev:func */ + u32 addr = dev->busno << 16 | (12+i) << 11; + + /* default cells from root complex */ + memcpy(&imap_new[i*32], imap, 128); + /* first cell is PCI device address (BDF) */ + imap_new[(i*32)+(0*8)+0] = cpu_to_fdt32(addr); + imap_new[(i*32)+(1*8)+0] = cpu_to_fdt32(addr); + imap_new[(i*32)+(2*8)+0] = cpu_to_fdt32(addr); + imap_new[(i*32)+(3*8)+0] = cpu_to_fdt32(addr); + /* third cell is pin */ + imap_new[(i*32)+(0*8)+3] = cpu_to_fdt32(1); + imap_new[(i*32)+(1*8)+3] = cpu_to_fdt32(2); + imap_new[(i*32)+(2*8)+3] = cpu_to_fdt32(3); + imap_new[(i*32)+(3*8)+3] = cpu_to_fdt32(4); + /* sixth cell is relative interrupt */ + imap_new[(i*32)+(0*8)+6] = irq[(15-(12+i)+b+0)%4]; + imap_new[(i*32)+(1*8)+6] = irq[(15-(12+i)+b+1)%4]; + imap_new[(i*32)+(2*8)+6] = irq[(15-(12+i)+b+2)%4]; + imap_new[(i*32)+(3*8)+6] = irq[(15-(12+i)+b+3)%4]; + } + fdt_setprop(blob, np, "interrupt-map", imap_new, + sizeof(imap_new)); + reg[0] = cpu_to_fdt32(0xfff00); + reg[1] = 0; + reg[2] = 0; + reg[3] = cpu_to_fdt32(0x7); + fdt_setprop(blob, np, "interrupt-map-mask", reg, sizeof(reg)); + fdt_setprop_cell(blob, np, "#interrupt-cells", 1); + fdt_setprop_string(blob, np, "device_type", "pci"); + fdt_setprop_cell(blob, np, "#address-cells", 3); + fdt_setprop_cell(blob, np, "#size-cells", 2); + printf(" Added custom interrupt-map for GW16082\n"); + + return 0; +} + +/* + * PCI DT nodes must be nested therefore if we need to apply a DT fixup + * we will walk the PCI bus and add bridge nodes up to the device receiving + * the fixup. + */ +void ft_board_pci_fixup(void *blob, bd_t *bd) +{ + int i, np; + struct pci_dev *dev; + + for (i = 0; i < pci_devno; i++) { + dev = &pci_devs[i]; + + /* + * The GW16082 consists of a TI XIO2001 PCIe-to-PCI bridge and + * an EEPROM at i2c1-0x50. + */ + if ((dev->vendor == PCI_VENDOR_ID_TI) && + (dev->device == 0x8240) && + (i2c_set_bus_num(1) == 0) && + (i2c_probe(0x50) == 0)) + { + np = fdt_add_pci_path(blob, dev); + if (np > 0) + fdt_fixup_gw16082(blob, np, dev); + } + } +} +#endif /* if defined(CONFIG_CMD_PCI) */ + /* * called prior to booting kernel or by 'fdt boardsetup' command * @@ -976,6 +1199,11 @@ int ft_board_setup(void *blob, bd_t *bd) "no-1-8-v"); } +#if defined(CONFIG_CMD_PCI) + if (!getenv("nopcifixup")) + ft_board_pci_fixup(blob, bd); +#endif + /* * Peripheral Config: * remove nodes by alias path if EEPROM config tells us the |