diff options
Diffstat (limited to 'board/gen860t/ioport.c')
| -rw-r--r-- | board/gen860t/ioport.c | 331 |
1 files changed, 0 insertions, 331 deletions
diff --git a/board/gen860t/ioport.c b/board/gen860t/ioport.c deleted file mode 100644 index 7cd209b7ac..0000000000 --- a/board/gen860t/ioport.c +++ /dev/null @@ -1,331 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <mpc8xx.h> -#include <asm/8xx_immap.h> -#include "ioport.h" - -#if 0 -#define IOPORT_DEBUG -#endif - -#ifdef IOPORT_DEBUG -#define PRINTF(fmt,args...) printf (fmt ,##args) -#else -#define PRINTF(fmt,args...) -#endif - -/* - * The ioport configuration table. - */ -const mpc8xx_iop_conf_t iop_conf_tab[NUM_PORTS][PORT_BITS] = { - /* - * Port A configuration - * Pin Signal Type Active Initial state - * PA7 fpgaProgramLowOut Out Low High - * PA1 fpgaCoreVoltageFailLow In Low N/A - */ - { /* conf ppar psor pdir podr pdat pint function */ - /* N/A */ { 0, 0, 0, 0, 0, 0, 0 }, /* No pin */ - /* N/A */ { 0, 0, 0, 0, 0, 0, 0 }, /* No pin */ - /* PA15 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ - /* PA14 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ - /* PA13 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ - /* PA12 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ - /* PA11 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ - /* PA10 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ - /* PA9 */ { 1, 0, 0, 1, 0, 0, 0 }, /* grn bicolor LED 1*/ - /* PA8 */ { 1, 0, 0, 1, 0, 0, 0 }, /* red bicolor LED 1*/ - /* PA7 */ { 1, 0, 0, 1, 0, 1, 0 }, /* fpgaProgramLow */ - /* PA6 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ - /* PA5 */ { 1, 0, 0, 1, 0, 0, 0 }, /* grn bicolor LED 0*/ - /* PA4 */ { 1, 0, 0, 1, 0, 0, 0 }, /* red bicolor LED 0*/ - /* PA3 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ - /* PA2 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ -#if !defined(CONFIG_SC) - /* PA1 */ { 1, 0, 0, 0, 0, 0, 0 }, /* fpgaCoreVoltageFail*/ -#else - /* PA1 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ -#endif - /* PA0 */ { 0, 0, 0, 0, 0, 0, 0 } /* */ - }, - - /* - * Port B configuration - * Pin Signal Type Active Initial state - * PB14 docBusyLowIn In Low X - * PB15 gpio1Sig Out High Low - * PB16 fpgaDoneBi In High X - * PB17 swBitOkLowOut Out Low High - * PB19 speakerVolSig Out/Hi-Z High/Low High (Hi-Z) - * PB22 fpgaInitLowBi In Low X - * PB23 batteryOkSig In High X - * PB31 pulseCatcherClr Out High 0 - */ - { /* conf ppar psor pdir podr pdat pint function */ -#if !defined(CONFIG_SC) - /* PB31 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ -#else - /* PB31 */ { 1, 0, 0, 1, 0, 0, 0 }, /* pulseCatcherClr */ -#endif - /* PB30 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ - /* PB29 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ - /* PB28 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ - /* PB27 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ - /* PB26 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ - /* PB25 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ - /* PB24 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ -#if !defined(CONFIG_SC) - /* PB23 */ { 1, 0, 0, 0, 0, 0, 0 }, /* batteryOk */ -#else - /* PB23 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ -#endif - /* PB22 */ { 1, 0, 0, 0, 0, 0, 0 }, /* fpgaInitLowBi */ - /* PB21 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ - /* PB20 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ -#if !defined(CONFIG_SC) - /* PB19 */ { 1, 0, 0, 1, 1, 1, 0 }, /* speakerVol */ -#else - /* PB19 */ { 0, 0, 0, 1, 1, 1, 0 }, /* */ -#endif - /* PB18 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ - /* PB17 */ { 1, 0, 0, 1, 0, 1, 0 }, /* swBitOkLow */ - /* PB16 */ { 1, 0, 0, 0, 0, 0, 0 }, /* fpgaDone */ - /* PB15 */ { 1, 0, 0, 1, 0, 0, 0 }, /* gpio1 */ -#if !defined(CONFIG_SC) - /* PB14 */ { 1, 0, 0, 0, 0, 0, 0 } /* docBusyLow */ -#else - /* PB14 */ { 0, 0, 0, 0, 0, 0, 0 } /* */ -#endif - }, - - /* - * Port C configuration - * Pin Signal Type Active Initial state - * PC4 i2cBus1EnSig Out High High - * PC5 i2cBus2EnSig Out High High - * PC6 gpio0Sig Out High Low - * PC8 i2cBus3EnSig Out High High - * PC10 i2cBus4EnSig Out High High - * PC11 fpgaResetLowOut Out Low High - * PC12 systemBitOkIn In High X - * PC15 selfDreqLow In Low X - */ - { /* conf ppar psor pdir podr pdat pint function */ - /* N/A */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ - /* N/A */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ - /* PC15 */ { 1, 0, 0, 0, 0, 0, 0 }, /* selfDreqLowIn */ - /* PC14 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ - /* PC13 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ -#if !defined(CONFIG_SC) - /* PC12 */ { 1, 0, 0, 0, 0, 0, 0 }, /* systemBitOkIn */ -#else - /* PC12 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ -#endif - /* PC11 */ { 1, 0, 0, 1, 0, 1, 0 }, /* fpgaResetLowOut */ -#if !defined(CONFIG_SC) - /* PC10 */ { 1, 0, 0, 1, 0, 1, 0 }, /* i2cBus4EnSig */ -#else - /* PC10 */ { 0, 0, 0, 1, 0, 1, 0 }, /* */ -#endif - /* PC9 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ -#if !defined(CONFIG_SC) - /* PC8 */ { 1, 0, 0, 1, 0, 1, 0 }, /* i2cBus3EnSig */ -#else - /* PC8 */ { 0, 0, 0, 1, 0, 1, 0 }, /* */ -#endif - /* PC7 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ - /* PC6 */ { 1, 0, 0, 1, 0, 1, 0 }, /* gpio0 */ -#if !defined(CONFIG_SC) - /* PC5 */ { 1, 0, 0, 1, 0, 1, 0 }, /* i2cBus2EnSig */ - /* PC4 */ { 1, 0, 0, 1, 0, 1, 0 }, /* i2cBus1EnSig */ -#else - /* PC5 */ { 0, 0, 0, 1, 0, 1, 0 }, /* */ - /* PC4 */ { 0, 0, 0, 1, 0, 1, 0 }, /* */ -#endif - /* N/A */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ - /* N/A */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ - /* N/A */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ - /* N/A */ { 0, 0, 0, 0, 0, 0, 0 } /* */ - }, - - /* - * Port D configuration - */ - { /* conf ppar psor pdir podr pdat pint function */ - /* N/A */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ - /* N/A */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ - /* PD15 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ - /* PD14 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ - /* PD13 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ - /* PD12 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ - /* PD11 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ - /* PD10 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ - /* PD9 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ - /* PD8 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ - /* PD7 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ - /* PD6 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ - /* PD5 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ - /* PD4 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ - /* PD3 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ - /* N/A */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ - /* N/A */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ - /* N/A */ { 0, 0, 0, 0, 0, 0, 0 } /* */ - } -}; - -/* - * Configure the MPC8XX I/O ports per the ioport configuration table - * (taken from ./arch/powerpc/cpu/mpc8260/cpu_init.c) - */ -void config_mpc8xx_ioports (volatile immap_t * immr) -{ - int portnum; - - for (portnum = 0; portnum < NUM_PORTS; portnum++) { - uint pmsk = 0, ppar = 0, psor = 0, pdir = 0; - uint podr = 0, pdat = 0, pint = 0; - uint msk = 1; - mpc8xx_iop_conf_t *iopc = - (mpc8xx_iop_conf_t *) & iop_conf_tab[portnum][0]; - mpc8xx_iop_conf_t *eiopc = iopc + PORT_BITS; - - /* - * For all ports except port B, ignore the two don't care entries - * in the configuration tables. - */ - if (portnum != 1) { - iopc = (mpc8xx_iop_conf_t *) & - iop_conf_tab[portnum][2]; - } - - /* - * NOTE: index 0 refers to pin 17, index 17 refers to pin 0 - */ - while (iopc < eiopc) { - if (iopc->conf) { - pmsk |= msk; - if (iopc->ppar) - ppar |= msk; - if (iopc->psor) - psor |= msk; - if (iopc->pdir) - pdir |= msk; - if (iopc->podr) - podr |= msk; - if (iopc->pdat) - pdat |= msk; - if (iopc->pint) - pint |= msk; - } - msk <<= 1; - iopc++; - } - - PRINTF ("%s:%d:\n portnum=%d ", __FUNCTION__, __LINE__, - portnum); -#ifdef IOPORT_DEBUG - switch (portnum) { - case 0: - printf ("(A)\n"); - break; - case 1: - printf ("(B)\n"); - break; - case 2: - printf ("(C)\n"); - break; - case 3: - printf ("(D)\n"); - break; - default: - printf ("(?)\n"); - break; - } -#endif - PRINTF (" ppar=0x%.8x pdir=0x%.8x podr=0x%.8x\n" - " pdat=0x%.8x psor=0x%.8x pint=0x%.8x pmsk=0x%.8x\n", - ppar, pdir, podr, pdat, psor, pint, pmsk); - - /* - * Have to handle the ioports on a port-by-port basis since there - * are three different flavors. - */ - if (pmsk != 0) { - uint tpmsk = ~pmsk; - - if (0 == portnum) { /* port A */ - immr->im_ioport.iop_papar &= tpmsk; - immr->im_ioport.iop_padat = - (immr->im_ioport. - iop_padat & tpmsk) | pdat; - immr->im_ioport.iop_padir = - (immr->im_ioport. - iop_padir & tpmsk) | pdir; - immr->im_ioport.iop_paodr = - (immr->im_ioport. - iop_paodr & tpmsk) | podr; - immr->im_ioport.iop_papar |= ppar; - } else if (1 == portnum) { /* port B */ - immr->im_cpm.cp_pbpar &= tpmsk; - immr->im_cpm.cp_pbdat = - (immr->im_cpm. - cp_pbdat & tpmsk) | pdat; - immr->im_cpm.cp_pbdir = - (immr->im_cpm. - cp_pbdir & tpmsk) | pdir; - immr->im_cpm.cp_pbodr = - (immr->im_cpm. - cp_pbodr & tpmsk) | podr; - immr->im_cpm.cp_pbpar |= ppar; - } else if (2 == portnum) { /* port C */ - immr->im_ioport.iop_pcpar &= tpmsk; - immr->im_ioport.iop_pcdat = - (immr->im_ioport. - iop_pcdat & tpmsk) | pdat; - immr->im_ioport.iop_pcdir = - (immr->im_ioport. - iop_pcdir & tpmsk) | pdir; - immr->im_ioport.iop_pcint = - (immr->im_ioport. - iop_pcint & tpmsk) | pint; - immr->im_ioport.iop_pcso = - (immr->im_ioport. - iop_pcso & tpmsk) | psor; - immr->im_ioport.iop_pcpar |= ppar; - } else if (3 == portnum) { /* port D */ - immr->im_ioport.iop_pdpar &= tpmsk; - immr->im_ioport.iop_pddat = - (immr->im_ioport. - iop_pddat & tpmsk) | pdat; - immr->im_ioport.iop_pddir = - (immr->im_ioport. - iop_pddir & tpmsk) | pdir; - immr->im_ioport.iop_pdpar |= ppar; - } - } - } - - PRINTF ("%s:%d: Port A:\n papar=0x%.4x padir=0x%.4x" - " paodr=0x%.4x\n padat=0x%.4x\n", __FUNCTION__, __LINE__, - immr->im_ioport.iop_papar, immr->im_ioport.iop_padir, - immr->im_ioport.iop_paodr, immr->im_ioport.iop_padat); - PRINTF ("%s:%d: Port B:\n pbpar=0x%.8x pbdir=0x%.8x" - " pbodr=0x%.8x\n pbdat=0x%.8x\n", __FUNCTION__, __LINE__, - immr->im_cpm.cp_pbpar, immr->im_cpm.cp_pbdir, - immr->im_cpm.cp_pbodr, immr->im_cpm.cp_pbdat); - PRINTF ("%s:%d: Port C:\n pcpar=0x%.4x pcdir=0x%.4x" - " pcdat=0x%.4x\n pcso=0x%.4x pcint=0x%.4x\n ", - __FUNCTION__, __LINE__, immr->im_ioport.iop_pcpar, - immr->im_ioport.iop_pcdir, immr->im_ioport.iop_pcdat, - immr->im_ioport.iop_pcso, immr->im_ioport.iop_pcint); - PRINTF ("%s:%d: Port D:\n pdpar=0x%.4x pddir=0x%.4x" - " pddat=0x%.4x\n", __FUNCTION__, __LINE__, - immr->im_ioport.iop_pdpar, immr->im_ioport.iop_pddir, - immr->im_ioport.iop_pddat); -} |