diff options
Diffstat (limited to 'board/hisilicon/hikey/README')
| -rw-r--r-- | board/hisilicon/hikey/README | 8 |
1 files changed, 4 insertions, 4 deletions
diff --git a/board/hisilicon/hikey/README b/board/hisilicon/hikey/README index 0f6aab717c..4c2021f509 100644 --- a/board/hisilicon/hikey/README +++ b/board/hisilicon/hikey/README @@ -56,7 +56,7 @@ Compile U-Boot Compile ARM Trusted Firmware (ATF) ================================== - > cd ~/hikey/src/atf + > cd ~/hikey/src/arm-trusted-firmware > make CROSS_COMPILE=aarch64-linux-gnu- all fip \ BL30=~/hikey/bin/mcuimage.bin \ BL33=~/hikey/bin/u-boot.bin DEBUG=1 PLAT=hikey @@ -67,10 +67,10 @@ Copy resulting binaries Compile l-loader =============== - > cd ~/hikey/l-loader + > cd ~/hikey/src/l-loader > make BL1=~/hikey/bin/bl1.bin all > cp *.img ~/hikey/bin - > cp l-loader.bin ~/hikey.bin + > cp l-loader.bin ~/hikey/bin These instructions are adapted from https://github.com/96boards/documentation/wiki/HiKeyUEFI @@ -82,7 +82,7 @@ FLASHING the hisi-idt.py utility. The command below assumes HiKey enumerated as the first USB serial port - > sudo ~/hikey/burn_boot/hisi-idt.py -d /dev/ttyUSB0 --img1=~/hikey/bin/l-loader.bin + > sudo ~/hikey/src/burn-boot/hisi-idt.py -d /dev/ttyUSB0 --img1=~/hikey/bin/l-loader.bin 2. Once LED 0 comes on solid, HiKey board should be detected as a fastboot device by plugging a USB A to mini B cable from your PC to the USB OTG port of HiKey (on some boards I've found this to be unreliable). |