diff options
Diffstat (limited to 'board/hymod/hymod.h')
| -rw-r--r-- | board/hymod/hymod.h | 305 |
1 files changed, 0 insertions, 305 deletions
diff --git a/board/hymod/hymod.h b/board/hymod/hymod.h deleted file mode 100644 index 7024d8a807..0000000000 --- a/board/hymod/hymod.h +++ /dev/null @@ -1,305 +0,0 @@ -/* - * (C) Copyright 2001 - * Murray Jensen, CSIRO-MIT, <Murray.Jensen@csiro.au> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef _HYMOD_H_ -#define _HYMOD_H_ - -#ifdef CONFIG_MPC8260 -#include <asm/iopin_8260.h> -#endif - -/* - * hymod configuration data - passed by boot code via the board information - * structure (only U-Boot has support for this at the moment) - * - * there are three types of data passed up from the boot monitor. the first - * (type hymod_eeprom_t) is the eeprom data that was read off both the main - * (or mother) board and the mezzanine board (if any). this data defines how - * many Xilinx fpgas are on each board, and their types (among other things). - * the second type of data (type xlx_mmap_t, one per Xilinx fpga) defines where - * in the physical address space the various Xilinx fpga access regions have - * been mapped by the boot rom. the third type of data (type xlx_iopins_t, - * one per Xilinx fpga) defines which io port pins are connected to the various - * signals required to program a Xilinx fpga. - * - * A ram/flash "bank" refers to memory controlled by the same chip select. - * - * the eeprom contents are defined as in technical note #2 - basically, - * a header, zero or more records in no particular order, and a 32 bit crc - * a record is 1 or more type bytes, a length byte and "length" bytes. - */ - -#define HYMOD_EEPROM_ID 0xAA /* eeprom id byte */ -#define HYMOD_EEPROM_VER 1 /* eeprom contents version (0-127) */ -#define HYMOD_EEPROM_SIZE 256 /* number of bytes in the eeprom */ - -/* eeprom header */ -typedef - struct { - unsigned char id; /* eeprom id byte */ - unsigned char :1; - unsigned char ver:7; /* eeprom contents version number */ - unsigned long len; /* total # of bytes btw hdr and crc */ - } -hymod_eehdr_t; - -/* maximum number of bytes available for eeprom data records */ -#define HYMOD_EEPROM_MAXLEN (HYMOD_EEPROM_SIZE \ - - sizeof (hymod_eehdr_t) \ - - sizeof (unsigned long)) - -/* eeprom data record */ -typedef - union { - struct { - unsigned char topbit:1; - unsigned char type:7; - unsigned char len; - unsigned char data[1]; /* variable length */ - } small; - struct { - unsigned short topbit:1; - unsigned short nxtbit:1; - unsigned short type:14; - unsigned short len; - unsigned char data[1]; /* variable length */ - } medium; - struct { - unsigned long topbit:1; - unsigned long nxtbit:1; - unsigned long type:30; - unsigned long len; - unsigned char data[1]; /* variable length */ - } large; - } -hymod_eerec_t; - -#define HYMOD_EEOFF_MAIN 0x00 /* i2c addr offset for main eeprom */ -#define HYMOD_EEOFF_MEZZ 0x04 /* i2c addr offset for mezz eepomr */ - -/* eeprom record types */ -#define HYMOD_EEREC_SERNO 1 /* serial number */ -#define HYMOD_EEREC_DATE 2 /* date */ -#define HYMOD_EEREC_BATCH 3 /* batch id */ -#define HYMOD_EEREC_TYPE 4 /* board type */ -#define HYMOD_EEREC_REV 5 /* revision number */ -#define HYMOD_EEREC_SDRAM 6 /* sdram sizes */ -#define HYMOD_EEREC_FLASH 7 /* flash sizes */ -#define HYMOD_EEREC_ZBT 8 /* zbt ram sizes */ -#define HYMOD_EEREC_XLXTYP 9 /* Xilinx fpga types */ -#define HYMOD_EEREC_XLXSPD 10 /* Xilinx fpga speeds */ -#define HYMOD_EEREC_XLXTMP 11 /* Xilinx fpga temperatures */ -#define HYMOD_EEREC_XLXGRD 12 /* Xilinx fpga grades */ -#define HYMOD_EEREC_CPUTYP 13 /* Motorola CPU type */ -#define HYMOD_EEREC_CPUSPD 14 /* CPU speed */ -#define HYMOD_EEREC_BUSSPD 15 /* bus speed */ -#define HYMOD_EEREC_CPMSPD 16 /* CPM speed */ -#define HYMOD_EEREC_HSTYPE 17 /* high-speed serial chip type */ -#define HYMOD_EEREC_HSCHIN 18 /* high-speed serial input channels */ -#define HYMOD_EEREC_HSCHOUT 19 /* high-speed serial output channels */ - -/* some dimensions */ -#define HYMOD_MAX_BATCH 32 /* max no. of bytes in batch id */ -#define HYMOD_MAX_SDRAM 4 /* max sdram "banks" on any board */ -#define HYMOD_MAX_FLASH 4 /* max flash "banks" on any board */ -#define HYMOD_MAX_ZBT 16 /* max ZBT rams on any board */ -#define HYMOD_MAX_XLX 4 /* max Xilinx fpgas on any board */ - -#define HYMOD_MAX_BYTES 16 /* enough to store any bytes array */ - -/* board types */ -#define HYMOD_BDTYPE_NONE 0 /* information not present */ -#define HYMOD_BDTYPE_IO 1 /* I/O main board */ -#define HYMOD_BDTYPE_CLP 2 /* CLP main board */ -#define HYMOD_BDTYPE_DSP 3 /* DSP main board */ -#define HYMOD_BDTYPE_INPUT 4 /* video input mezzanine board */ -#define HYMOD_BDTYPE_ALTINPUT 5 /* video input mezzanine board */ -#define HYMOD_BDTYPE_DISPLAY 6 /* video display mezzanine board */ -#define HYMOD_BDTYPE_MAX 7 /* first invalid value */ - -/* Xilinx fpga types */ -#define HYMOD_XTYP_NONE 0 /* information not present */ -#define HYMOD_XTYP_XCV300E 1 /* Xilinx Virtex 300 */ -#define HYMOD_XTYP_XCV400E 2 /* Xilinx Virtex 400 */ -#define HYMOD_XTYP_XCV600E 3 /* Xilinx Virtex 600 */ -#define HYMOD_XTYP_MAX 4 /* first invalid value */ - -/* Xilinx fpga speeds */ -#define HYMOD_XSPD_NONE 0 /* information not present */ -#define HYMOD_XSPD_SIX 1 -#define HYMOD_XSPD_SEVEN 2 -#define HYMOD_XSPD_EIGHT 3 -#define HYMOD_XSPD_MAX 4 /* first invalid value */ - -/* Xilinx fpga temperatures */ -#define HYMOD_XTMP_NONE 0 /* information not present */ -#define HYMOD_XTMP_COM 1 -#define HYMOD_XTMP_IND 2 -#define HYMOD_XTMP_MAX 3 /* first invalid value */ - -/* Xilinx fpga grades */ -#define HYMOD_XTMP_NONE 0 /* information not present */ -#define HYMOD_XTMP_NORMAL 1 -#define HYMOD_XTMP_ENGSAMP 2 -#define HYMOD_XTMP_MAX 3 /* first invalid value */ - -/* CPU types */ -#define HYMOD_CPUTYPE_NONE 0 /* information not present */ -#define HYMOD_CPUTYPE_MPC8260 1 /* Motorola MPC8260 embedded powerpc */ -#define HYMOD_CPUTYPE_MAX 2 /* first invalid value */ - -/* CPU/BUS/CPM clock speeds */ -#define HYMOD_CLKSPD_NONE 0 /* information not present */ -#define HYMOD_CLKSPD_33MHZ 1 -#define HYMOD_CLKSPD_66MHZ 2 -#define HYMOD_CLKSPD_100MHZ 3 -#define HYMOD_CLKSPD_133MHZ 4 -#define HYMOD_CLKSPD_166MHZ 5 -#define HYMOD_CLKSPD_200MHZ 6 -#define HYMOD_CLKSPD_MAX 7 /* first invalid value */ - -/* high speed serial chip types */ -#define HYMOD_HSSTYPE_NONE 0 /* information not present */ -#define HYMOD_HSSTYPE_AMCC52064 1 -#define HYMOD_HSSTYPE_MAX 2 /* first invalid value */ - -/* a date (yyyy-mm-dd) */ -typedef - struct { - unsigned short year; - unsigned char month; - unsigned char day; - } -hymod_date_t; - -/* describes a Xilinx fpga */ -typedef - struct { - unsigned char type; /* chip type */ - unsigned char speed; /* chip speed rating */ - unsigned char temp; /* chip temperature rating */ - unsigned char grade; /* chip grade */ - } -hymod_xlx_t; - -/* describes a Motorola embedded processor */ -typedef - struct { - unsigned char type; /* CPU type */ - unsigned char cpuspd; /* speed of the PowerPC core */ - unsigned char busspd; /* speed of the system and 60x bus */ - unsigned char cpmspd; /* speed of the CPM co-processor */ - } -hymod_mpc_t; - -/* info about high-speed (1Gbit) serial interface */ -typedef - struct { - unsigned char type; /* high-speed serial chip type */ - unsigned char nchin; /* number of input channels mounted */ - unsigned char nchout; /* number of output channels mounted */ - } -hymod_hss_t; - -/* - * this defines the contents of the serial eeprom that exists on every - * hymod board, including mezzanine boards (the serial eeprom will be - * faked for early development boards that don't have one) - */ - -typedef - struct { - unsigned char valid:1; /* contents of this struct is valid */ - unsigned char ver:7; /* eeprom contents version */ - unsigned char bdtype; /* board type */ - unsigned char bdrev; /* board revision */ - unsigned char batchlen; /* length of batch string below */ - unsigned long serno; /* serial number */ - hymod_date_t date; /* manufacture date */ - unsigned char batch[32]; /* manufacturer specific batch id */ - unsigned char nsdram; /* # of ram "banks" */ - unsigned char nflash; /* # of flash "banks" */ - unsigned char nzbt; /* # of ZBT rams */ - unsigned char nxlx; /* # of Xilinx fpgas */ - unsigned char sdramsz[HYMOD_MAX_SDRAM]; /* log2 of sdram size */ - unsigned char flashsz[HYMOD_MAX_FLASH]; /* log2 of flash size */ - unsigned char zbtsz[HYMOD_MAX_ZBT]; /* log2 of ZBT ram size */ - hymod_xlx_t xlx[HYMOD_MAX_XLX]; /* Xilinx fpga info */ - hymod_mpc_t mpc; /* Motorola MPC CPU info */ - hymod_hss_t hss; /* high-speed serial info */ - } -hymod_eeprom_t; - -/* - * this defines a region in the processor's physical address space - */ -typedef - struct { - unsigned long exists:1; /* 1 if the region exists, 0 if not */ - unsigned long size:31; /* size in bytes */ - unsigned long base; /* base address */ - } -xlx_prgn_t; - -/* - * this defines where the various Xilinx fpga access regions are mapped - * into the physical address space of the processor - */ -typedef - struct { - xlx_prgn_t prog; /* program access region */ - xlx_prgn_t reg; /* register access region */ - xlx_prgn_t port; /* port access region */ - } -xlx_mmap_t; - -/* - * this defines which 8260 i/o port pins are connected to the various - * signals required for programming a Xilinx fpga - */ -typedef - struct { - iopin_t prog_pin; /* assert for >= 300ns to program */ - iopin_t init_pin; /* goes high when fpga is cleared */ - iopin_t done_pin; /* goes high when program is done */ - iopin_t enable_pin; /* some fpgas need enabling */ - } -xlx_iopins_t; - -/* all info about one Xilinx chip */ -typedef - struct { - xlx_mmap_t mmap; - xlx_iopins_t iopins; - unsigned long irq:8; /* h/w intr req number for this fpga */ - } -xlx_info_t; - -/* all info about one hymod board */ -typedef - struct { - hymod_eeprom_t eeprom; - xlx_info_t xlx[HYMOD_MAX_XLX]; - } -hymod_board_t; - -/* - * this defines the configuration information of a hymod board-set - * (main board + possible mezzanine board). In future, there may be - * more than one mezzanine board (stackable?) - if so, add a "mezz2" - * field, and so on... or make mezz an array? - */ -typedef - struct { - unsigned long ver:8; /* version control */ - hymod_board_t main; /* main board info */ - hymod_board_t mezz; /* mezzanine board info */ - unsigned long crc; /* ensures kernel and boot prom agree */ - } -hymod_conf_t; - -#endif /* _HYMOD_H_ */ |