summaryrefslogtreecommitdiff
path: root/board/inka4x0/inka4x0.c
diff options
context:
space:
mode:
Diffstat (limited to 'board/inka4x0/inka4x0.c')
-rw-r--r--board/inka4x0/inka4x0.c254
1 files changed, 0 insertions, 254 deletions
diff --git a/board/inka4x0/inka4x0.c b/board/inka4x0/inka4x0.c
deleted file mode 100644
index 88cae59e8f..0000000000
--- a/board/inka4x0/inka4x0.c
+++ /dev/null
@@ -1,254 +0,0 @@
-/*
- * (C) Copyright 2008-2009
- * Andreas Pfefferle, DENX Software Engineering, ap@denx.de.
- *
- * (C) Copyright 2009
- * Detlev Zundel, DENX Software Engineering, dzu@denx.de.
- *
- * (C) Copyright 2004
- * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
- *
- * (C) Copyright 2004
- * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de
- *
- * (C) Copyright 2003-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <asm/io.h>
-#include <common.h>
-#include <mpc5xxx.h>
-#include <pci.h>
-
-#if defined(CONFIG_DDR_MT46V16M16)
-#include "mt46v16m16-75.h"
-#elif defined(CONFIG_SDR_MT48LC16M16A2)
-#include "mt48lc16m16a2-75.h"
-#elif defined(CONFIG_DDR_MT46V32M16)
-#include "mt46v32m16.h"
-#elif defined(CONFIG_DDR_HYB25D512160BF)
-#include "hyb25d512160bf.h"
-#elif defined(CONFIG_DDR_K4H511638C)
-#include "k4h511638c.h"
-#else
-#error "INKA4x0 SDRAM: invalid chip type specified!"
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#ifndef CONFIG_SYS_RAMBOOT
-static void sdram_start (int hi_addr)
-{
- volatile struct mpc5xxx_sdram *sdram =
- (struct mpc5xxx_sdram *)MPC5XXX_SDRAM;
- long hi_addr_bit = hi_addr ? 0x01000000 : 0;
-
- /* unlock mode register */
- out_be32(&sdram->ctrl, SDRAM_CONTROL | 0x80000000 | hi_addr_bit);
-
- /* precharge all banks */
- out_be32(&sdram->ctrl, SDRAM_CONTROL | 0x80000002 | hi_addr_bit);
-
-#if SDRAM_DDR
- /* set mode register: extended mode */
- out_be32(&sdram->mode, SDRAM_EMODE);
-
- /* set mode register: reset DLL */
- out_be32(&sdram->mode, SDRAM_MODE | 0x04000000);
-#endif
-
- /* precharge all banks */
- out_be32(&sdram->ctrl, SDRAM_CONTROL | 0x80000002 | hi_addr_bit);
-
- /* auto refresh */
- out_be32(&sdram->ctrl, SDRAM_CONTROL | 0x80000004 | hi_addr_bit);
-
- /* set mode register */
- out_be32(&sdram->mode, SDRAM_MODE);
-
- /* normal operation */
- out_be32(&sdram->ctrl, SDRAM_CONTROL | hi_addr_bit);
-}
-#endif
-
-/*
- * ATTENTION: Although partially referenced dram_init does NOT make real use
- * use of CONFIG_SYS_SDRAM_BASE. The code does not work if CONFIG_SYS_SDRAM_BASE
- * is something else than 0x00000000.
- */
-
-int dram_init(void)
-{
- volatile struct mpc5xxx_mmap_ctl *mm =
- (struct mpc5xxx_mmap_ctl *) CONFIG_SYS_MBAR;
- volatile struct mpc5xxx_cdm *cdm =
- (struct mpc5xxx_cdm *) MPC5XXX_CDM;
- volatile struct mpc5xxx_sdram *sdram =
- (struct mpc5xxx_sdram *) MPC5XXX_SDRAM;
- ulong dramsize = 0;
-#ifndef CONFIG_SYS_RAMBOOT
- long test1, test2;
-
- /* setup SDRAM chip selects */
- out_be32(&mm->sdram0, 0x0000001c); /* 512MB at 0x0 */
- out_be32(&mm->sdram1, 0x40000000); /* disabled */
-
- /* setup config registers */
- out_be32(&sdram->config1, SDRAM_CONFIG1);
- out_be32(&sdram->config2, SDRAM_CONFIG2);
-
-#if SDRAM_DDR
- /* set tap delay */
- out_be32(&cdm->porcfg, SDRAM_TAPDELAY);
-#endif
-
- /* find RAM size using SDRAM CS0 only */
- sdram_start(0);
- test1 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x20000000);
- sdram_start(1);
- test2 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x20000000);
- if (test1 > test2) {
- sdram_start(0);
- dramsize = test1;
- } else {
- dramsize = test2;
- }
-
- /* memory smaller than 1MB is impossible */
- if (dramsize < (1 << 20)) {
- dramsize = 0;
- }
-
- /* set SDRAM CS0 size according to the amount of RAM found */
- if (dramsize > 0) {
- out_be32(&mm->sdram0, 0x13 +
- __builtin_ffs(dramsize >> 20) - 1);
- } else {
- out_be32(&mm->sdram0, 0); /* disabled */
- }
-
- out_be32(&mm->sdram1, dramsize); /* disabled */
-#else /* CONFIG_SYS_RAMBOOT */
-
- /* retrieve size of memory connected to SDRAM CS0 */
- dramsize = in_be32(&mm->sdram0) & 0xFF;
- if (dramsize >= 0x13) {
- dramsize = (1 << (dramsize - 0x13)) << 20;
- } else {
- dramsize = 0;
- }
-#endif /* CONFIG_SYS_RAMBOOT */
-
- gd->ram_size = dramsize;
-
- return 0;
-}
-
-int checkboard (void)
-{
- puts ("Board: INKA 4X0\n");
- return 0;
-}
-
-void flash_preinit(void)
-{
- volatile struct mpc5xxx_lpb *lpb = (struct mpc5xxx_lpb *)MPC5XXX_LPB;
-
- /*
- * Now, when we are in RAM, enable flash write
- * access for detection process.
- * Note that CS_BOOT (CS0) cannot be cleared when
- * executing in flash.
- */
- clrbits_be32(&lpb->cs0_cfg, 0x1); /* clear RO */
-}
-
-int misc_init_f (void)
-{
- volatile struct mpc5xxx_gpio *gpio =
- (struct mpc5xxx_gpio *) MPC5XXX_GPIO;
- volatile struct mpc5xxx_wu_gpio *wu_gpio =
- (struct mpc5xxx_wu_gpio *)MPC5XXX_WU_GPIO;
- volatile struct mpc5xxx_gpt *gpt;
- char tmp[10];
- int i, br;
-
- i = getenv_f("brightness", tmp, sizeof(tmp));
- br = (i > 0)
- ? (int) simple_strtoul (tmp, NULL, 10)
- : CONFIG_SYS_BRIGHTNESS;
- if (br > 255)
- br = 255;
-
- /* Initialize GPIO output pins.
- */
- /* Configure GPT as GPIO output (and set them as they control low-active LEDs */
- for (i = 0; i <= 5; i++) {
- gpt = (struct mpc5xxx_gpt *)(MPC5XXX_GPT + (i * 0x10));
- out_be32(&gpt->emsr, 0x34);
- }
-
- /* Configure GPT7 as PWM timer, 1kHz, no ints. */
- gpt = (struct mpc5xxx_gpt *)(MPC5XXX_GPT + (7 * 0x10));
- out_be32(&gpt->emsr, 0); /* Disable */
- out_be32(&gpt->cir, 0x020000fe);
- out_be32(&gpt->pwmcr, (br << 16));
- out_be32(&gpt->emsr, 0x3); /* Enable PWM mode and start */
-
- /* Configure PSC3_6,7 as GPIO output */
- setbits_be32(&gpio->simple_gpioe, MPC5XXX_GPIO_SIMPLE_PSC3_6 |
- MPC5XXX_GPIO_SIMPLE_PSC3_7);
- setbits_be32(&gpio->simple_ddr, MPC5XXX_GPIO_SIMPLE_PSC3_6 |
- MPC5XXX_GPIO_SIMPLE_PSC3_7);
-
- /* Configure PSC3_9 and GPIO_WKUP6,7 as GPIO output */
- setbits_8(&wu_gpio->enable, MPC5XXX_GPIO_WKUP_6 |
- MPC5XXX_GPIO_WKUP_7 |
- MPC5XXX_GPIO_WKUP_PSC3_9);
- setbits_8(&wu_gpio->ddr, MPC5XXX_GPIO_WKUP_6 |
- MPC5XXX_GPIO_WKUP_7 |
- MPC5XXX_GPIO_WKUP_PSC3_9);
-
- /* Set LR mirror bit because it is low-active */
- setbits_8(&wu_gpio->dvo, MPC5XXX_GPIO_WKUP_7);
-
- /* Reset Coral-P graphics controller */
- setbits_8(&wu_gpio->dvo, MPC5XXX_GPIO_WKUP_PSC3_9);
-
- /* Enable display backlight */
- clrbits_8(&gpio->sint_inten, MPC5XXX_GPIO_SINT_PSC3_8);
- setbits_8(&gpio->sint_gpioe, MPC5XXX_GPIO_SINT_PSC3_8);
- setbits_8(&gpio->sint_ddr, MPC5XXX_GPIO_SINT_PSC3_8);
- setbits_8(&gpio->sint_dvo, MPC5XXX_GPIO_SINT_PSC3_8);
-
- /*
- * Configure three wire serial interface to RTC (PSC1_4,
- * PSC2_4, PSC3_4, PSC3_5)
- */
- setbits_8(&wu_gpio->enable, MPC5XXX_GPIO_WKUP_PSC1_4 |
- MPC5XXX_GPIO_WKUP_PSC2_4);
- setbits_8(&wu_gpio->ddr, MPC5XXX_GPIO_WKUP_PSC1_4 |
- MPC5XXX_GPIO_WKUP_PSC2_4);
- clrbits_8(&wu_gpio->dvo, MPC5XXX_GPIO_WKUP_PSC1_4);
- clrbits_8(&gpio->sint_inten, MPC5XXX_GPIO_SINT_PSC3_4 |
- MPC5XXX_GPIO_SINT_PSC3_5);
- setbits_8(&gpio->sint_gpioe, MPC5XXX_GPIO_SINT_PSC3_4 |
- MPC5XXX_GPIO_SINT_PSC3_5);
- setbits_8(&gpio->sint_ddr, MPC5XXX_GPIO_SINT_PSC3_5);
- clrbits_8(&gpio->sint_dvo, MPC5XXX_GPIO_SINT_PSC3_5);
-
- return 0;
-}
-
-#ifdef CONFIG_PCI
-static struct pci_controller hose;
-
-extern void pci_mpc5xxx_init(struct pci_controller *);
-
-void pci_init_board(void)
-{
- pci_mpc5xxx_init(&hose);
-}
-#endif
generated by cgit (git 2.34.1) at 2024-12-28 21:46:29 +0000