diff options
Diffstat (limited to 'board/keymile/km_arm/km_arm.c')
| -rw-r--r-- | board/keymile/km_arm/km_arm.c | 55 |
1 files changed, 55 insertions, 0 deletions
diff --git a/board/keymile/km_arm/km_arm.c b/board/keymile/km_arm/km_arm.c index 2938861f36..64cf2ed635 100644 --- a/board/keymile/km_arm/km_arm.c +++ b/board/keymile/km_arm/km_arm.c @@ -37,6 +37,24 @@ DECLARE_GLOBAL_DATA_PTR; #define REG_IRQ_CIRQ2 0x2d #define MASK_RBI_DEFECT_16 0x01 +/* + * PHY registers definitions + */ +#define PHY_MARVELL_OUI 0x5043 +#define PHY_MARVELL_88E1118_MODEL 0x0022 +#define PHY_MARVELL_88E1118R_MODEL 0x0024 + +#define PHY_MARVELL_PAGE_REG 0x0016 +#define PHY_MARVELL_DEFAULT_PAGE 0x0000 + +#define PHY_MARVELL_88E1118R_LED_CTRL_PAGE 0x0003 +#define PHY_MARVELL_88E1118R_LED_CTRL_REG 0x0010 + +#define PHY_MARVELL_88E1118R_LED_CTRL_RESERVED 0x1000 +#define PHY_MARVELL_88E1118R_LED_CTRL_LED0_1000MB (0x7<<0) +#define PHY_MARVELL_88E1118R_LED_CTRL_LED1_ACT (0x3<<4) +#define PHY_MARVELL_88E1118R_LED_CTRL_LED2_LINK (0x0<<8) + /* Multi-Purpose Pins Functionality configuration */ static const u32 kwmpp_config[] = { MPP0_NF_IO2, @@ -409,6 +427,9 @@ void reset_phy(void) /* Configure and enable MV88E1118 PHY on the piggy*/ void reset_phy(void) { + unsigned int oui; + unsigned char model, rev; + char *name = "egiga0"; if (miiphy_set_current_dev(name)) @@ -416,6 +437,40 @@ void reset_phy(void) /* reset the phy */ miiphy_reset(name, CONFIG_PHY_BASE_ADR); + + /* get PHY model */ + if (miiphy_info(name, CONFIG_PHY_BASE_ADR, &oui, &model, &rev)) + return; + + /* check for Marvell 88E1118R Gigabit PHY (PIGGY3) */ + if ((oui == PHY_MARVELL_OUI) && + (model == PHY_MARVELL_88E1118R_MODEL)) { + /* set page register to 3 */ + if (miiphy_write(name, CONFIG_PHY_BASE_ADR, + PHY_MARVELL_PAGE_REG, + PHY_MARVELL_88E1118R_LED_CTRL_PAGE)) + printf("Error writing PHY page reg\n"); + + /* + * leds setup as printed on PCB: + * LED2 (Link): 0x0 (On Link, Off No Link) + * LED1 (Activity): 0x3 (On Activity, Off No Activity) + * LED0 (Speed): 0x7 (On 1000 MBits, Off Else) + */ + if (miiphy_write(name, CONFIG_PHY_BASE_ADR, + PHY_MARVELL_88E1118R_LED_CTRL_REG, + PHY_MARVELL_88E1118R_LED_CTRL_RESERVED | + PHY_MARVELL_88E1118R_LED_CTRL_LED0_1000MB | + PHY_MARVELL_88E1118R_LED_CTRL_LED1_ACT | + PHY_MARVELL_88E1118R_LED_CTRL_LED2_LINK)) + printf("Error writing PHY LED reg\n"); + + /* set page register back to 0 */ + if (miiphy_write(name, CONFIG_PHY_BASE_ADR, + PHY_MARVELL_PAGE_REG, + PHY_MARVELL_DEFAULT_PAGE)) + printf("Error writing PHY page reg\n"); + } } #endif |