diff options
Diffstat (limited to 'board/lubbock/memsetup.S')
| -rw-r--r-- | board/lubbock/memsetup.S | 159 |
1 files changed, 79 insertions, 80 deletions
diff --git a/board/lubbock/memsetup.S b/board/lubbock/memsetup.S index 5bbd859585..dc0b7be024 100644 --- a/board/lubbock/memsetup.S +++ b/board/lubbock/memsetup.S @@ -140,7 +140,7 @@ memsetup: mem_init: - ldr r1, =MEMC_BASE /* get memory controller base addr. */ + ldr r1, =MEMC_BASE /* get memory controller base addr. */ /* ---------------------------------------------------------------- */ /* Step 2a: Initialize Asynchronous static memory controller */ @@ -148,81 +148,81 @@ mem_init: /* MSC registers: timing, bus width, mem type */ - /* MSC0: nCS(0,1) */ - ldr r2, =CFG_MSC0_VAL - str r2, [r1, #MSC0_OFFSET] - ldr r2, [r1, #MSC0_OFFSET] /* read back to ensure */ + /* MSC0: nCS(0,1) */ + ldr r2, =CFG_MSC0_VAL + str r2, [r1, #MSC0_OFFSET] + ldr r2, [r1, #MSC0_OFFSET] /* read back to ensure */ /* that data latches */ - /* MSC1: nCS(2,3) */ - ldr r2, =CFG_MSC1_VAL - str r2, [r1, #MSC1_OFFSET] - ldr r2, [r1, #MSC1_OFFSET] + /* MSC1: nCS(2,3) */ + ldr r2, =CFG_MSC1_VAL + str r2, [r1, #MSC1_OFFSET] + ldr r2, [r1, #MSC1_OFFSET] /* MSC2: nCS(4,5) */ - ldr r2, =CFG_MSC2_VAL - str r2, [r1, #MSC2_OFFSET] - ldr r2, [r1, #MSC2_OFFSET] + ldr r2, =CFG_MSC2_VAL + str r2, [r1, #MSC2_OFFSET] + ldr r2, [r1, #MSC2_OFFSET] /* ---------------------------------------------------------------- */ /* Step 2b: Initialize Card Interface */ /* ---------------------------------------------------------------- */ /* MECR: Memory Expansion Card Register */ - ldr r2, =CFG_MECR_VAL - str r2, [r1, #MECR_OFFSET] + ldr r2, =CFG_MECR_VAL + str r2, [r1, #MECR_OFFSET] ldr r2, [r1, #MECR_OFFSET] /* MCMEM0: Card Interface slot 0 timing */ - ldr r2, =CFG_MCMEM0_VAL - str r2, [r1, #MCMEM0_OFFSET] + ldr r2, =CFG_MCMEM0_VAL + str r2, [r1, #MCMEM0_OFFSET] ldr r2, [r1, #MCMEM0_OFFSET] - /* MCMEM1: Card Interface slot 1 timing */ - ldr r2, =CFG_MCMEM1_VAL - str r2, [r1, #MCMEM1_OFFSET] + /* MCMEM1: Card Interface slot 1 timing */ + ldr r2, =CFG_MCMEM1_VAL + str r2, [r1, #MCMEM1_OFFSET] ldr r2, [r1, #MCMEM1_OFFSET] /* MCATT0: Card Interface Attribute Space Timing, slot 0 */ - ldr r2, =CFG_MCATT0_VAL - str r2, [r1, #MCATT0_OFFSET] + ldr r2, =CFG_MCATT0_VAL + str r2, [r1, #MCATT0_OFFSET] ldr r2, [r1, #MCATT0_OFFSET] /* MCATT1: Card Interface Attribute Space Timing, slot 1 */ - ldr r2, =CFG_MCATT1_VAL - str r2, [r1, #MCATT1_OFFSET] + ldr r2, =CFG_MCATT1_VAL + str r2, [r1, #MCATT1_OFFSET] ldr r2, [r1, #MCATT1_OFFSET] /* MCIO0: Card Interface I/O Space Timing, slot 0 */ - ldr r2, =CFG_MCIO0_VAL - str r2, [r1, #MCIO0_OFFSET] + ldr r2, =CFG_MCIO0_VAL + str r2, [r1, #MCIO0_OFFSET] ldr r2, [r1, #MCIO0_OFFSET] /* MCIO1: Card Interface I/O Space Timing, slot 1 */ - ldr r2, =CFG_MCIO1_VAL - str r2, [r1, #MCIO1_OFFSET] + ldr r2, =CFG_MCIO1_VAL + str r2, [r1, #MCIO1_OFFSET] ldr r2, [r1, #MCIO1_OFFSET] /* ---------------------------------------------------------------- */ - /* Step 2c: Write FLYCNFG FIXME: what's that??? */ - /* ---------------------------------------------------------------- */ + /* Step 2c: Write FLYCNFG FIXME: what's that??? */ + /* ---------------------------------------------------------------- */ /* ---------------------------------------------------------------- */ - /* Step 2d: Initialize Timing for Sync Memory (SDCLK0) */ - /* ---------------------------------------------------------------- */ + /* Step 2d: Initialize Timing for Sync Memory (SDCLK0) */ + /* ---------------------------------------------------------------- */ /* Before accessing MDREFR we need a valid DRI field, so we set */ /* this to power on defaults + DRI field. */ - ldr r3, =CFG_MDREFR_VAL - ldr r2, =0xFFF - and r3, r3, r2 + ldr r3, =CFG_MDREFR_VAL + ldr r2, =0xFFF + and r3, r3, r2 ldr r4, =0x03ca4000 - orr r4, r4, r3 + orr r4, r4, r3 str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */ - ldr r4, [r1, #MDREFR_OFFSET] + ldr r4, [r1, #MDREFR_OFFSET] - /* Note: preserve the mdrefr value in r4 */ + /* Note: preserve the mdrefr value in r4 */ /* ---------------------------------------------------------------- */ @@ -238,30 +238,30 @@ mem_init: /* FIXME: we use async mode for now */ - /* ---------------------------------------------------------------- */ - /* Step 4: Initialize SDRAM */ - /* ---------------------------------------------------------------- */ + /* ---------------------------------------------------------------- */ + /* Step 4: Initialize SDRAM */ + /* ---------------------------------------------------------------- */ - /* set MDREFR according to user define with exception of a few bits */ + /* set MDREFR according to user define with exception of a few bits */ - ldr r4, =CFG_MDREFR_VAL + ldr r4, =CFG_MDREFR_VAL orr r4, r4, #(MDREFR_SLFRSH) bic r4, r4, #(MDREFR_E1PIN|MDREFR_E0PIN) str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */ - ldr r4, [r1, #MDREFR_OFFSET] + ldr r4, [r1, #MDREFR_OFFSET] /* Step 4b: de-assert MDREFR:SLFRSH. */ bic r4, r4, #(MDREFR_SLFRSH) - str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */ - ldr r4, [r1, #MDREFR_OFFSET] + str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */ + ldr r4, [r1, #MDREFR_OFFSET] /* Step 4c: assert MDREFR:E1PIN and E0PIO as desired */ - ldr r4, =CFG_MDREFR_VAL - str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */ - ldr r4, [r1, #MDREFR_OFFSET] + ldr r4, =CFG_MDREFR_VAL + str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */ + ldr r4, [r1, #MDREFR_OFFSET] /* Step 4d: write MDCNFG with MDCNFG:DEx deasserted (set to 0), to */ @@ -270,15 +270,15 @@ mem_init: ldr r4, =CFG_MDCNFG_VAL bic r4, r4, #(MDCNFG_DE0|MDCNFG_DE1) - str r4, [r1, #MDCNFG_OFFSET] /* write back MDCNFG */ - ldr r4, [r1, #MDCNFG_OFFSET] + str r4, [r1, #MDCNFG_OFFSET] /* write back MDCNFG */ + ldr r4, [r1, #MDCNFG_OFFSET] /* Step 4e: Wait for the clock to the SDRAMs to stabilize, */ /* 100..200 µsec. */ ldr r3, =OSCR /* reset the OS Timer Count to zero */ - mov r2, #0 + mov r2, #0 str r2, [r3] ldr r4, =0x300 /* really 0x2E1 is about 200usec, */ /* so 0x300 should be plenty */ @@ -308,14 +308,14 @@ mem_init: /* Step 4g: Write MDCNFG with enable bits asserted */ /* (MDCNFG:DEx set to 1). */ - ldr r3, [r1, #MDCNFG_OFFSET] + ldr r3, [r1, #MDCNFG_OFFSET] orr r3, r3, #(MDCNFG_DE0|MDCNFG_DE1) - str r3, [r1, #MDCNFG_OFFSET] + str r3, [r1, #MDCNFG_OFFSET] /* Step 4h: Write MDMRS. */ - ldr r2, =CFG_MDMRS_VAL - str r2, [r1, #MDMRS_OFFSET] + ldr r2, =CFG_MDMRS_VAL + str r2, [r1, #MDMRS_OFFSET] /* We are finished with Intel's memory controller initialisation */ @@ -327,17 +327,17 @@ mem_init: initirqs: - mov r1, #0 /* clear int. level register (IRQ, not FIQ) */ - ldr r2, =ICLR - str r1, [r2] + mov r1, #0 /* clear int. level register (IRQ, not FIQ) */ + ldr r2, =ICLR + str r1, [r2] - ldr r2, =ICMR /* mask all interrupts at the controller */ - str r1, [r2] + ldr r2, =ICMR /* mask all interrupts at the controller */ + str r1, [r2] - /* ---------------------------------------------------------------- */ + /* ---------------------------------------------------------------- */ /* Clock initialisation */ - /* ---------------------------------------------------------------- */ + /* ---------------------------------------------------------------- */ initclks: @@ -346,36 +346,36 @@ initclks: /* Turn Off ALL on-chip peripheral clocks for re-configuration */ /* Note: See label 'ENABLECLKS' for the re-enabling */ - ldr r1, =CKEN - mov r2, #0 - str r2, [r1] + ldr r1, =CKEN + mov r2, #0 + str r2, [r1] - /* default value in case no valid rotary switch setting is found */ - ldr r2, =(CCCR_L27|CCCR_M2|CCCR_N10) /* DEFAULT: {200/200/100} */ + /* default value in case no valid rotary switch setting is found */ + ldr r2, =(CCCR_L27|CCCR_M2|CCCR_N10) /* DEFAULT: {200/200/100} */ - /* ... and write the core clock config register */ - ldr r1, =CCCR - str r2, [r1] + /* ... and write the core clock config register */ + ldr r1, =CCCR + str r2, [r1] #ifdef RTC /* enable the 32Khz oscillator for RTC and PowerManager */ - ldr r1, =OSCC - mov r2, #OSCC_OON - str r2, [r1] + ldr r1, =OSCC + mov r2, #OSCC_OON + str r2, [r1] /* NOTE: spin here until OSCC.OOK get set, meaning the PLL */ /* has settled. */ 60: - ldr r2, [r1] - ands r2, r2, #1 - beq 60b + ldr r2, [r1] + ands r2, r2, #1 + beq 60b #endif /* ---------------------------------------------------------------- */ /* */ - /* ---------------------------------------------------------------- */ + /* ---------------------------------------------------------------- */ /* Save SDRAM size */ ldr r1, =DRAM_SIZE @@ -402,11 +402,10 @@ initclks: #endif - /* ---------------------------------------------------------------- */ + /* ---------------------------------------------------------------- */ /* End memsetup */ - /* ---------------------------------------------------------------- */ + /* ---------------------------------------------------------------- */ endmemsetup: mov pc, lr - |