diff options
Diffstat (limited to 'board/matrix_vision/mvblx/mvblx.c')
| -rw-r--r-- | board/matrix_vision/mvblx/mvblx.c | 159 |
1 files changed, 0 insertions, 159 deletions
diff --git a/board/matrix_vision/mvblx/mvblx.c b/board/matrix_vision/mvblx/mvblx.c deleted file mode 100644 index c9d615b79a..0000000000 --- a/board/matrix_vision/mvblx/mvblx.c +++ /dev/null @@ -1,159 +0,0 @@ -/* - * MATRIX VISION GmbH mvBlueLYNX-X - * - * Derived from Beagle and Overo - * - * (C) Copyright 2004-2008 - * Texas Instruments, <www.ti.com> - * - * Author : - * Sunil Kumar <sunilsaini05@gmail.com> - * Shashi Ranjan <shashiranjanmca05@gmail.com> - * - * Derived from Beagle Board and 3430 SDP code by - * Richard Woodruff <r-woodruff2@ti.com> - * Syed Mohammed Khasim <khasim@ti.com> - * - * - * SPDX-License-Identifier: GPL-2.0+ - */ -#include <common.h> -#include <netdev.h> -#include <twl4030.h> -#include <asm/io.h> -#include <asm/arch/mem.h> -#include <asm/arch/mmc_host_def.h> -#include <asm/arch/mux.h> -#include <asm/arch/sys_proto.h> -#include <asm/arch/gpio.h> -#include <asm/mach-types.h> -#include "mvblx.h" -#include "fpga.h" - -DECLARE_GLOBAL_DATA_PTR; - -#if defined(CONFIG_CMD_NET) -static void setup_net_chip(void); -#endif /* CONFIG_CMD_NET */ - -/* - * Routine: board_init - * Description: Early hardware init. - */ -int board_init(void) -{ - gpmc_init(); /* in SRAM or SDRAM, finish GPMC */ - /* boot param addr */ - gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100); - - return 0; -} - -/* - * Routine: misc_init_r - * Description: Configure board specific parts - */ -int misc_init_r(void) -{ - printf("mvBlueLYNX-X\n"); - if (get_cpu_family() == CPU_OMAP36XX) - setenv("mpurate", "1000"); - else - setenv("mpurate", "600"); - - twl4030_power_init(); - -#if defined(CONFIG_CMD_NET) - setup_net_chip(); -#endif /* CONFIG_CMD_NET */ - - mvblx_init_fpga(); - - mac_read_from_eeprom(); - - dieid_num_r(); - - return 0; -} - -/* - * Routine: set_muxconf_regs - * Description: Setting up the configuration Mux registers specific to the - * hardware. Many pins need to be moved from protect to primary - * mode. - */ -void set_muxconf_regs(void) -{ - MUX_MVBLX(); -} - -#ifdef CONFIG_GENERIC_MMC -int board_mmc_init(bd_t *bis) -{ - omap_mmc_init(0, 0, 0, -1, -1); - omap_mmc_init(1, 0, 0, -1, -1); - return 0; -} - -void board_mmc_power_init(void) -{ - twl4030_power_mmc_init(0); - twl4030_power_mmc_init(1); -} -#endif - -#if defined(CONFIG_CMD_NET) -/* - * Routine: setup_net_chip - * Description: Setting up the configuration GPMC registers specific to the - * Ethernet hardware. - */ -static void setup_net_chip(void) -{ - struct gpio *gpio5_base = (struct gpio *)OMAP34XX_GPIO5_BASE; - struct ctrl *ctrl_base = (struct ctrl *)OMAP34XX_CTRL_BASE; - - /* Configure GPMC registers */ - writel(NET_GPMC_CONFIG1, &gpmc_cfg->cs[0].config1); - writel(NET_GPMC_CONFIG2, &gpmc_cfg->cs[0].config2); - writel(NET_GPMC_CONFIG3, &gpmc_cfg->cs[0].config3); - writel(NET_GPMC_CONFIG4, &gpmc_cfg->cs[0].config4); - writel(NET_GPMC_CONFIG5, &gpmc_cfg->cs[0].config5); - writel(NET_GPMC_CONFIG6, &gpmc_cfg->cs[0].config6); - writel(NET_GPMC_CONFIG7, &gpmc_cfg->cs[0].config7); - - /* Enable off mode for NWE in PADCONF_GPMC_NWE register */ - writew(readw(&ctrl_base->gpmc_nwe) | 0x0E00, &ctrl_base->gpmc_nwe); - /* Enable off mode for NOE in PADCONF_GPMC_NADV_ALE register */ - writew(readw(&ctrl_base->gpmc_noe) | 0x0E00, &ctrl_base->gpmc_noe); - /* Enable off mode for ALE in PADCONF_GPMC_NADV_ALE register */ - writew(readw(&ctrl_base->gpmc_nadv_ale) | 0x0E00, - &ctrl_base->gpmc_nadv_ale); - - /* Make GPIO 139 as output pin */ - writel(readl(&gpio5_base->oe) & ~(GPIO11), &gpio5_base->oe); - - /* Now send a pulse on the GPIO pin */ - writel(GPIO11, &gpio5_base->setdataout); - udelay(1); - writel(GPIO11, &gpio5_base->cleardataout); - udelay(1); - writel(GPIO11, &gpio5_base->setdataout); -} - -int board_eth_init(bd_t *bis) -{ - int rc = 0; -#ifdef CONFIG_SMC911X - rc = smc911x_initialize(0, CONFIG_SMC911X_BASE); -#endif - return rc; -} - -int overwrite_console(void) -{ - /* return true if console should be overwritten */ - return 0; -} - -#endif /* CONFIG_CMD_NET */ |