diff options
Diffstat (limited to 'board/ml2/flash.c')
-rw-r--r-- | board/ml2/flash.c | 300 |
1 files changed, 0 insertions, 300 deletions
diff --git a/board/ml2/flash.c b/board/ml2/flash.c deleted file mode 100644 index c125d418d3..0000000000 --- a/board/ml2/flash.c +++ /dev/null @@ -1,300 +0,0 @@ -/* - * flash.c: Support code for the flash chips on the Xilinx ML2 board - * - * Copyright 2002 Mind NV - * - * http://www.mind.be/ - * - * Author : Peter De Schrijver (p2@mind.be) - * - * This software may be used and distributed according to the terms of - * the GNU General Public License (GPL) version 2, incorporated herein by - * reference. Drivers based on or derived from this code fall under the GPL - * and must retain the authorship, copyright and this license notice. This - * file is not a complete program and may only be used when the entire program - * is licensed under the GPL. - * - */ - -#include <common.h> -#include <asm/u-boot.h> -#include <configs/ML2.h> - -#define FLASH_BANK_SIZE (64*1024*1024) - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; - -#define SECT_SIZE (512*1024) - -#define CMD_READ_ARRAY 0x00FF00FF00FF00FULL -#define CMD_IDENTIFY 0x0090009000900090ULL -#define CMD_ERASE_SETUP 0x0020002000200020ULL -#define CMD_ERASE_CONFIRM 0x00D000D000D000D0ULL -#define CMD_PROGRAM 0x0040004000400040ULL -#define CMD_RESUME 0x00D000D000D000D0ULL -#define CMD_SUSPEND 0x00B000B000B000B0ULL -#define CMD_STATUS_READ 0x0070007000700070ULL -#define CMD_STATUS_RESET 0x0050005000500050ULL - -#define BIT_BUSY 0x0080008000800080ULL -#define BIT_ERASE_SUSPEND 0x004000400400040ULL -#define BIT_ERASE_ERROR 0x0020002000200020ULL -#define BIT_PROGRAM_ERROR 0x0010001000100010ULL -#define BIT_VPP_RANGE_ERROR 0x0008000800080008ULL -#define BIT_PROGRAM_SUSPEND 0x0004000400040004ULL -#define BIT_PROTECT_ERROR 0x0002000200020002ULL -#define BIT_UNDEFINED 0x0001000100010001ULL - -#define BIT_SEQUENCE_ERROR 0x0030003000300030ULL - -#define BIT_TIMEOUT 0x80000000 - - -inline void eieio(void) { - - __asm__ __volatile__ ("eieio" : : : "memory"); - -} - -ulong flash_init(void) { - - int i, j; - ulong size = 0; - - for(i=0;i<CONFIG_SYS_MAX_FLASH_BANKS;i++) { - ulong flashbase = 0; - - flash_info[i].flash_id = (INTEL_MANUFACT & FLASH_VENDMASK) | - (INTEL_ID_28F128J3A & FLASH_TYPEMASK); - flash_info[i].size = FLASH_BANK_SIZE; - flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT; - memset(flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT); - if (i==0) - flashbase = CONFIG_SYS_FLASH_BASE; - else - panic("configured too many flash banks!\n"); - for (j = 0; j < flash_info[i].sector_count; j++) - flash_info[i].start[j]=flashbase + j * SECT_SIZE; - - size += flash_info[i].size; - } - - return size; -} - -void flash_print_info (flash_info_t *info) { - - int i; - - switch (info->flash_id & FLASH_VENDMASK) { - case (INTEL_MANUFACT & FLASH_VENDMASK): - printf("Intel: "); - break; - default: - printf("Unknown Vendor "); - break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case (INTEL_ID_28F128J3A & FLASH_TYPEMASK): - printf("4x 28F128J3A (128Mbit)\n"); - break; - default: - printf("Unknown Chip Type\n"); - break; - } - - printf(" Size: %ld MB in %d Sectors\n", info->size >> 20, info->sector_count); - printf(" Sector Start Addresses:"); - for (i = 0; i < info->sector_count; i++) { - if ((i % 5) == 0) - printf("\n "); - printf (" %08lX%s", info->start[i], - info->protect[i] ? " (RO)" : " "); - } - printf ("\n"); -} - -int flash_error (unsigned long long code) { - - if (code & BIT_TIMEOUT) { - printf ("Timeout\n"); - return ERR_TIMOUT; - } - - if (~code & BIT_BUSY) { - printf ("Busy\n"); - return ERR_PROG_ERROR; - } - - if (code & BIT_VPP_RANGE_ERROR) { - printf ("Vpp range error\n"); - return ERR_PROG_ERROR; - } - - if (code & BIT_PROTECT_ERROR) { - printf ("Device protect error\n"); - return ERR_PROG_ERROR; - } - - if (code & BIT_SEQUENCE_ERROR) { - printf ("Command seqence error\n"); - return ERR_PROG_ERROR; - } - - if (code & BIT_ERASE_ERROR) { - printf ("Block erase error\n"); - return ERR_PROG_ERROR; - } - - if (code & BIT_PROGRAM_ERROR) { - printf ("Program error\n"); - return ERR_PROG_ERROR; - } - - if (code & BIT_ERASE_SUSPEND) { - printf ("Block erase suspended\n"); - return ERR_PROG_ERROR; - } - - if (code & BIT_PROGRAM_SUSPEND) { - printf ("Program suspended\n"); - return ERR_PROG_ERROR; - } - - return ERR_OK; - -} - -int flash_erase (flash_info_t *info, int s_first, int s_last) { - - int rc = ERR_OK; - int sect; - unsigned long long result; - - if (info->flash_id == FLASH_UNKNOWN) - return ERR_UNKNOWN_FLASH_TYPE; - - if ((s_first < 0) || (s_first > s_last)) - return ERR_INVAL; - - if ((info->flash_id & FLASH_VENDMASK) != (INTEL_MANUFACT & FLASH_VENDMASK)) - return ERR_UNKNOWN_FLASH_VENDOR; - - for (sect=s_first; sect<=s_last; ++sect) - if (info->protect[sect]) - return ERR_PROTECTED; - - for (sect = s_first; sect<=s_last && !ctrlc(); sect++) { - volatile unsigned long long *addr= - (unsigned long long *)(info->start[sect]); - - printf("Erasing sector %2d ... ", sect); - - *addr=CMD_STATUS_RESET; - eieio(); - *addr=CMD_ERASE_SETUP; - eieio(); - *addr=CMD_ERASE_CONFIRM; - eieio(); - - do { - result = *addr; - } while(~result & BIT_BUSY); - - *addr=CMD_READ_ARRAY; - - if ((rc = flash_error(result)) == ERR_OK) - printf("ok.\n"); - else - break; - } - - if (ctrlc()) - printf("User Interrupt!\n"); - - return rc; -} - -static int write_word (flash_info_t *info, ulong dest, unsigned long long data) { - - volatile unsigned long long *addr=(unsigned long long *)dest; - unsigned long long result; - int rc = ERR_OK; - - result = *addr; - if ((result & data) != data) - return ERR_NOT_ERASED; - - *addr=CMD_STATUS_RESET; - eieio(); - *addr=CMD_PROGRAM; - eieio(); - *addr=data; - eieio(); - - do { - result = *addr; - } while(~result & BIT_BUSY); - - *addr=CMD_READ_ARRAY; - - rc = flash_error(result); - - return rc; - -} - -int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) { - - ulong cp, wp; - unsigned long long data; - int l; - int i,rc; - - wp=(addr & ~7); - - if((l=addr-wp) != 0) { - data=0; - for(i=0,cp=wp;i<l;++i,++cp) - data = (data >> 8) | (*(uchar *)cp << 24); - - for (; i<8 && cnt>0; ++i) { - data = (data >> 8) | (*src++ << 24); - --cnt; - ++cp; - } - - for (; i<8; ++i, ++cp) - data = (data >> 8) | (*(uchar *)cp << 24); - - if ((rc = write_word(info, wp, data)) != 0) - return rc; - - wp+=8; - } - - while(cnt>=8) { - data = *((unsigned long long *)src); - if ((rc = write_word(info, wp, data)) != 0) - return rc; - src+=8; - wp+=8; - cnt-=8; - } - - if(cnt == 0) - return ERR_OK; - - data = 0; - for (i=0, cp=wp; i<8 && cnt>0; ++i, ++cp) { - data = (data >> 8) | (*src++ << 24); - --cnt; - } - for (; i<8; ++i, ++cp) { - data = (data >> 8) | (*(uchar *)cp << 24); - } - - return write_word(info, wp, data); - -} |