summaryrefslogtreecommitdiff
path: root/board/phytec/pcm030
diff options
context:
space:
mode:
Diffstat (limited to 'board/phytec/pcm030')
-rw-r--r--board/phytec/pcm030/Kconfig12
-rw-r--r--board/phytec/pcm030/MAINTAINERS7
-rw-r--r--board/phytec/pcm030/Makefile8
-rw-r--r--board/phytec/pcm030/README42
-rw-r--r--board/phytec/pcm030/mt46v32m16-75.h21
-rw-r--r--board/phytec/pcm030/pcm030.c209
6 files changed, 0 insertions, 299 deletions
diff --git a/board/phytec/pcm030/Kconfig b/board/phytec/pcm030/Kconfig
deleted file mode 100644
index 3a3eab8576..0000000000
--- a/board/phytec/pcm030/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_PCM030
-
-config SYS_BOARD
- default "pcm030"
-
-config SYS_VENDOR
- default "phytec"
-
-config SYS_CONFIG_NAME
- default "pcm030"
-
-endif
diff --git a/board/phytec/pcm030/MAINTAINERS b/board/phytec/pcm030/MAINTAINERS
deleted file mode 100644
index 4e2ab0d64e..0000000000
--- a/board/phytec/pcm030/MAINTAINERS
+++ /dev/null
@@ -1,7 +0,0 @@
-PCM030 BOARD
-M: Jon Smirl <jonsmirl@gmail.com>
-S: Maintained
-F: board/phytec/pcm030/
-F: include/configs/pcm030.h
-F: configs/pcm030_defconfig
-F: configs/pcm030_LOWBOOT_defconfig
diff --git a/board/phytec/pcm030/Makefile b/board/phytec/pcm030/Makefile
deleted file mode 100644
index 2bb49dc7aa..0000000000
--- a/board/phytec/pcm030/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2003-2007
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y := pcm030.o
diff --git a/board/phytec/pcm030/README b/board/phytec/pcm030/README
deleted file mode 100644
index 05faab68c8..0000000000
--- a/board/phytec/pcm030/README
+++ /dev/null
@@ -1,42 +0,0 @@
-To build RAMBOOT, replace this section the main Makefile
-
-pcm030_config \
-pcm030_RAMBOOT_config \
-pcm030_LOWBOOT_config: unconfig
- @ >include/config.h
- @[ -z "$(findstring LOWBOOT_,$@)" ] || \
- { echo "CONFIG_SYS_TEXT_BASE = 0xFF000000" >board/phytec/pcm030/config.tmp ; \
- echo "... with LOWBOOT configuration" ; \
- }
- @[ -z "$(findstring RAMBOOT_,$@)" ] || \
- { echo "CONFIG_SYS_TEXT_BASE = 0x00100000" >board/phycore_mpc5200b_tiny/\
- config.tmp ; \
- echo "... with RAMBOOT configuration" ; \
- echo "... remember to make sure that MBAR is already \
- switched to 0xF0000000 !!!" ; \
- }
- @$(MKCONFIG) -a pcm030 ppc mpc5xxx pcm030 phytec
- @ echo "remember to set pcm030_REV to 0 for rev 1245.0 rev or to 1 for rev 1245.1"
-
-Alternative SDRAM settings:
-
-#define SDRAM_MODE 0x018D0000
-#define SDRAM_EMODE 0x40090000
-#define SDRAM_CONTROL 0x715f0f00
-#define SDRAM_CONFIG1 0x73722930
-#define SDRAM_CONFIG2 0x47770000
-
-/* Settings for XLB = 99 MHz */
-#define SDRAM_MODE 0x008D0000
-#define SDRAM_EMODE 0x40090000
-#define SDRAM_CONTROL 0x714b0f00
-#define SDRAM_CONFIG1 0x63611730
-#define SDRAM_CONFIG2 0x47670000
-
-The board ships default with the environment in EEPROM
-Moving the environment to flash can be more reliable
-
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0xfe0000)
-#define CONFIG_ENV_SIZE 0x20000
-#define CONFIG_ENV_SECT_SIZE 0x20000
diff --git a/board/phytec/pcm030/mt46v32m16-75.h b/board/phytec/pcm030/mt46v32m16-75.h
deleted file mode 100644
index 47fc7c04bd..0000000000
--- a/board/phytec/pcm030/mt46v32m16-75.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * (C) Copyright 2004
- * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
- *
- * Eric Schumann, Phytec Messtechnik
- * adapted for mt46v32m16-75 DDR-RAM
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#define SDRAM_DDR 1 /* is DDR */
-
-/* Settings for XLB = 132 MHz */
-
-#define SDRAM_MODE 0x018D0000
-#define SDRAM_EMODE 0x40090000
-#define SDRAM_CONTROL 0x71500F00
-#define SDRAM_CONFIG1 0x73711930
-#define SDRAM_CONFIG2 0x47770000
-
-#define SDRAM_TAPDELAY 0x10000000 /* reserved Bit in MPC5200 B3-Step */
diff --git a/board/phytec/pcm030/pcm030.c b/board/phytec/pcm030/pcm030.c
deleted file mode 100644
index bdd980da91..0000000000
--- a/board/phytec/pcm030/pcm030.c
+++ /dev/null
@@ -1,209 +0,0 @@
-/*
- * (C) Copyright 2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2004
- * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
- *
- * (C) Copyright 2006
- * Eric Schumann, Phytec Messtechnik GmbH
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <mpc5xxx.h>
-#include <pci.h>
-#include <asm/io.h>
-
-#include "mt46v32m16-75.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#ifndef CONFIG_SYS_RAMBOOT
-static void sdram_start(int hi_addr)
-{
- volatile struct mpc5xxx_cdm *cdm =
- (struct mpc5xxx_cdm *)MPC5XXX_CDM;
- volatile struct mpc5xxx_sdram *sdram =
- (struct mpc5xxx_sdram *)MPC5XXX_SDRAM;
-
- long hi_addr_bit = hi_addr ? 0x01000000 : 0;
-
- /* unlock mode register */
- out_be32 (&sdram->ctrl,
- (SDRAM_CONTROL | 0x80000000 | hi_addr_bit));
-
- /* precharge all banks */
- out_be32 (&sdram->ctrl,
- (SDRAM_CONTROL | 0x80000002 | hi_addr_bit));
-
-#ifdef SDRAM_DDR
- /* set mode register: extended mode */
- out_be32 (&sdram->mode, (SDRAM_EMODE));
-
- /* set mode register: reset DLL */
- out_be32 (&sdram->mode,
- (SDRAM_MODE | 0x04000000));
-#endif
-
- /* precharge all banks */
- out_be32 (&sdram->ctrl,
- (SDRAM_CONTROL | 0x80000002 | hi_addr_bit));
-
- /* auto refresh */
- out_be32 (&sdram->ctrl,
- (SDRAM_CONTROL | 0x80000004 | hi_addr_bit));
-
- /* set mode register */
- out_be32 (&sdram->mode, (SDRAM_MODE));
-
- /* normal operation */
- out_be32 (&sdram->ctrl,
- (SDRAM_CONTROL | hi_addr_bit));
-
- /* set CDM clock enable register, set MPC5200B SDRAM bus */
- /* to reduced driver strength */
- out_be32 (&cdm->clock_enable, (0x00CFFFFF));
-}
-#endif
-
-/*
- * ATTENTION: Although partially referenced dram_init does NOT make
- * real use of CONFIG_SYS_SDRAM_BASE. The code does not
- * work if CONFIG_SYS_SDRAM_BASE
- * is something else than 0x00000000.
- */
-
-int dram_init(void)
-{
- volatile struct mpc5xxx_mmap_ctl *mm =
- (struct mpc5xxx_mmap_ctl *)CONFIG_SYS_MBAR;
- volatile struct mpc5xxx_cdm *cdm =
- (struct mpc5xxx_cdm *)MPC5XXX_CDM;
- volatile struct mpc5xxx_sdram *sdram =
- (struct mpc5xxx_sdram *)MPC5XXX_SDRAM;
- ulong dramsize = 0;
- ulong dramsize2 = 0;
-#ifndef CONFIG_SYS_RAMBOOT
- ulong test1, test2;
-
- /* setup SDRAM chip selects */
- /* 256MB at 0x0 */
- out_be32 (&mm->sdram0, 0x0000001b);
- /* disabled */
- out_be32 (&mm->sdram1, 0x10000000);
-
- /* setup config registers */
- out_be32 (&sdram->config1, SDRAM_CONFIG1);
- out_be32 (&sdram->config2, SDRAM_CONFIG2);
-
-#if defined(SDRAM_DDR) && defined(SDRAM_TAPDELAY)
- /* set tap delay */
- out_be32 (&cdm->porcfg, SDRAM_TAPDELAY);
-#endif
-
- /* find RAM size using SDRAM CS0 only */
- sdram_start(0);
- test1 = get_ram_size((long *) CONFIG_SYS_SDRAM_BASE, 0x10000000);
- sdram_start(1);
- test2 = get_ram_size((long *) CONFIG_SYS_SDRAM_BASE, 0x10000000);
- if (test1 > test2) {
- sdram_start(0);
- dramsize = test1;
- } else
- dramsize = test2;
-
- /* memory smaller than 1MB is impossible */
- if (dramsize < (1 << 20))
- dramsize = 0;
-
- /* set SDRAM CS0 size according to the amount of RAM found */
- if (dramsize > 0) {
- out_be32 (&mm->sdram0,
- (0x13 + __builtin_ffs(dramsize >> 20) - 1));
- } else {
- /* disabled */
- out_be32 (&mm->sdram0, 0);
- }
-
-#else /* CONFIG_SYS_RAMBOOT */
-
- /* retrieve size of memory connected to SDRAM CS0 */
- dramsize = in_be32(&mm->sdram0) & 0xFF;
- if (dramsize >= 0x13)
- dramsize = (1 << (dramsize - 0x13)) << 20;
- else
- dramsize = 0;
-
- /* retrieve size of memory connected to SDRAM CS1 */
- dramsize2 = in_be32(&mm->sdram1) & 0xFF;
- if (dramsize2 >= 0x13)
- dramsize2 = (1 << (dramsize2 - 0x13)) << 20;
- else
- dramsize2 = 0;
-
-#endif /* CONFIG_SYS_RAMBOOT */
-
- gd->ram_size = dramsize + dramsize2;
-
- return 0;
-}
-
-int checkboard(void)
-{
- puts("Board: phyCORE-MPC5200B-tiny\n");
- return 0;
-}
-
-#ifdef CONFIG_PCI
-static struct pci_controller hose;
-
-extern void pci_mpc5xxx_init(struct pci_controller *);
-
-void pci_init_board(void)
-{
- pci_mpc5xxx_init(&hose);
-}
-#endif
-
-#ifdef CONFIG_OF_BOARD_SETUP
-int ft_board_setup(void *blob, bd_t *bd)
-{
- ft_cpu_setup(blob, bd);
-
- return 0;
-}
-#endif /* CONFIG_OF_BOARD_SETUP */
-
-#if defined(CONFIG_IDE) && defined(CONFIG_IDE_RESET)
-
-#define GPIO_PSC2_4 0x02000000UL
-
-void init_ide_reset(void)
-{
- volatile struct mpc5xxx_wu_gpio *wu_gpio =
- (struct mpc5xxx_wu_gpio *)MPC5XXX_WU_GPIO;
- debug("init_ide_reset\n");
-
- /* Configure PSC2_4 as GPIO output for ATA reset */
- setbits_be32(&wu_gpio->enable, GPIO_PSC2_4);
- setbits_be32(&wu_gpio->ddr, GPIO_PSC2_4);
- /* Deassert reset */
- setbits_be32(&wu_gpio->dvo, GPIO_PSC2_4);
-}
-
-void ide_set_reset(int idereset)
-{
- volatile struct mpc5xxx_wu_gpio *wu_gpio =
- (struct mpc5xxx_wu_gpio *)MPC5XXX_WU_GPIO;
- debug("ide_reset(%d)\n", idereset);
-
- if (idereset) {
- clrbits_be32(&wu_gpio->dvo, GPIO_PSC2_4);
- /* Make a delay. MPC5200 spec says 25 usec min */
- udelay(500000);
- } else
- setbits_be32(&wu_gpio->dvo, GPIO_PSC2_4);
-}
-#endif /* defined(CONFIG_IDE) && defined(CONFIG_IDE_RESET) */
generated by cgit (git 2.34.1) at 2024-12-29 12:34:44 +0000