1 files changed, 5 insertions, 14 deletions
diff --git a/board/ronetix/pm9263/pm9263.c b/board/ronetix/pm9263/pm9263.c
index 1b00f08835..276ff80943 100644
--- a/board/ronetix/pm9263/pm9263.c
+++ b/board/ronetix/pm9263/pm9263.c
@@ -14,7 +14,6 @@
 #include <asm/gpio.h>
 #include <asm/arch/at91sam9_smc.h>
 #include <asm/arch/at91_common.h>
-#include <asm/arch/at91_pmc.h>
 #include <asm/arch/at91_rstc.h>
 #include <asm/arch/at91_matrix.h>
 #include <asm/arch/clk.h>
@@ -78,8 +77,6 @@ static void pm9263_nand_hw_init(void)
 #ifdef CONFIG_MACB
 static void pm9263_macb_hw_init(void)
 {
-	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
-
 	/*
 	 * PB27 enables the 50MHz oscillator for Ethernet PHY
 	 * 1 - enable
@@ -88,8 +85,7 @@ static void pm9263_macb_hw_init(void)
 	at91_set_pio_output(AT91_PIO_PORTB, 27, 1);
 	at91_set_pio_value(AT91_PIO_PORTB, 27, 1); /* 1- enable, 0 - disable */
 
-	/* Enable clock */
-	writel(1 << ATMEL_ID_EMAC, &pmc->pcer);
+	at91_periph_clk_enable(ATMEL_ID_EMAC);
 
 	/*
 	 * Disable pull-up on:
@@ -231,8 +227,6 @@ static int pm9263_lcd_hw_psram_init(void)
 
 static void pm9263_lcd_hw_init(void)
 {
-	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
-
 	at91_set_a_periph(AT91_PIO_PORTC, 0, 0);	/* LCDVSYNC */
 	at91_set_a_periph(AT91_PIO_PORTC, 1, 0);	/* LCDHSYNC */
 	at91_set_a_periph(AT91_PIO_PORTC, 2, 0);	/* LCDDOTCK */
@@ -257,7 +251,7 @@ static void pm9263_lcd_hw_init(void)
 	at91_set_a_periph(AT91_PIO_PORTC, 26, 0);	/* LCDD22 */
 	at91_set_a_periph(AT91_PIO_PORTC, 27, 0);	/* LCDD23 */
 
-	writel(1 << ATMEL_ID_LCDC, &pmc->pcer);
+	at91_periph_clk_enable(ATMEL_ID_LCDC);
 
 	/* Power Control */
 	at91_set_pio_output(AT91_PIO_PORTA, 22, 1);
@@ -323,12 +317,9 @@ void lcd_show_board_info(void)
 
 int board_early_init_f(void)
 {
-	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
-
-	/* Enable clocks for all PIOs */
-	writel((1 << ATMEL_ID_PIOA) | (1 << ATMEL_ID_PIOB) |
-		(1 << ATMEL_ID_PIOCDE),
-		&pmc->pcer);
+	at91_periph_clk_enable(ATMEL_ID_PIOA);
+	at91_periph_clk_enable(ATMEL_ID_PIOB);
+	at91_periph_clk_enable(ATMEL_ID_PIOCDE);
 
 	at91_seriald_hw_init();