diff options
Diffstat (limited to 'board/ronetix/pm9g45/pm9g45.c')
| -rw-r--r-- | board/ronetix/pm9g45/pm9g45.c | 20 |
1 files changed, 6 insertions, 14 deletions
diff --git a/board/ronetix/pm9g45/pm9g45.c b/board/ronetix/pm9g45/pm9g45.c index efc4133bbf..c2707e0015 100644 --- a/board/ronetix/pm9g45/pm9g45.c +++ b/board/ronetix/pm9g45/pm9g45.c @@ -17,7 +17,6 @@ #include <asm/gpio.h> #include <asm/arch/at91sam9_smc.h> #include <asm/arch/at91_common.h> -#include <asm/arch/at91_pmc.h> #include <asm/arch/at91_rstc.h> #include <asm/arch/at91_matrix.h> #include <asm/arch/gpio.h> @@ -39,7 +38,6 @@ static void pm9g45_nand_hw_init(void) unsigned long csa; struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC; struct at91_matrix *matrix = (struct at91_matrix *)ATMEL_BASE_MATRIX; - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; /* Enable CS3 */ csa = readl(&matrix->ccr[6]) | AT91_MATRIX_CSA_EBI_CS3A; @@ -63,7 +61,7 @@ static void pm9g45_nand_hw_init(void) AT91_SMC_MODE_TDF_CYCLE(3), &smc->cs[3].mode); - writel(1 << ATMEL_ID_PIOC, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_PIOC); #ifdef CONFIG_SYS_NAND_READY_PIN /* Configure RDY/BSY */ @@ -78,8 +76,6 @@ static void pm9g45_nand_hw_init(void) #ifdef CONFIG_MACB static void pm9g45_macb_hw_init(void) { - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - /* * PD2 enables the 50MHz oscillator for Ethernet PHY * 1 - enable @@ -88,8 +84,7 @@ static void pm9g45_macb_hw_init(void) at91_set_pio_output(AT91_PIO_PORTD, 2, 1); at91_set_pio_value(AT91_PIO_PORTD, 2, 1); /* 1- enable, 0 - disable */ - /* Enable clock */ - writel(1 << ATMEL_ID_EMAC, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_EMAC); /* * Disable pull-up on: @@ -114,13 +109,10 @@ static void pm9g45_macb_hw_init(void) int board_early_init_f(void) { - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - - /* Enable clocks for all PIOs */ - writel((1 << ATMEL_ID_PIOA) | - (1 << ATMEL_ID_PIOB) | - (1 << ATMEL_ID_PIOC) | - (1 << ATMEL_ID_PIODE), &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_PIOA); + at91_periph_clk_enable(ATMEL_ID_PIOB); + at91_periph_clk_enable(ATMEL_ID_PIOC); + at91_periph_clk_enable(ATMEL_ID_PIODE); at91_seriald_hw_init(); |