summaryrefslogtreecommitdiff
path: root/board/sandburst/karef/karef.c
diff options
context:
space:
mode:
Diffstat (limited to 'board/sandburst/karef/karef.c')
-rw-r--r--board/sandburst/karef/karef.c595
1 files changed, 0 insertions, 595 deletions
diff --git a/board/sandburst/karef/karef.c b/board/sandburst/karef/karef.c
deleted file mode 100644
index 96d7dcd8fd..0000000000
--- a/board/sandburst/karef/karef.c
+++ /dev/null
@@ -1,595 +0,0 @@
-/*
- * Copyright (C) 2005 Sandburst Corporation
- * Travis B. Sawyer
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <config.h>
-#include <common.h>
-#include <command.h>
-#include "karef.h"
-#include "karef_version.h"
-#include <timestamp.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <spd_sdram.h>
-#include <i2c.h>
-#include "../common/sb_common.h"
-#if defined(CONFIG_HAS_ETH0) || defined(CONFIG_HAS_ETH1) || \
- defined(CONFIG_HAS_ETH2) || defined(CONFIG_HAS_ETH3)
-#include <net.h>
-#endif
-
-void fpga_init (void);
-
-KAREF_BOARD_ID_ST board_id_as[] =
-{
- {"Undefined"}, /* Not specified */
- {"Kamino Reference Design"},
- {"Reserved"}, /* Reserved for future use */
- {"Reserved"}, /* Reserved for future use */
-};
-
-KAREF_BOARD_ID_ST ofem_board_id_as[] =
-{
- {"Undefined"},
- {"1x10 + 10x2"},
- {"Reserved"},
- {"Reserved"},
-};
-
-/*************************************************************************
- * board_early_init_f
- *
- * Setup chip selects, initialize the Opto-FPGA, initialize
- * interrupt polarity and triggers.
- ************************************************************************/
-int board_early_init_f (void)
-{
- ppc440_gpio_regs_t *gpio_regs;
-
- /* Enable GPIO interrupts */
- mtsdr(SDR0_PFC0, 0x00103E00);
-
- /* Setup access for LEDs, and system topology info */
- gpio_regs = (ppc440_gpio_regs_t *)CONFIG_SYS_GPIO_BASE;
- gpio_regs->open_drain = SBCOMMON_GPIO_SYS_LEDS;
- gpio_regs->tri_state = SBCOMMON_GPIO_DBGLEDS;
-
- /* Turn on all the leds for now */
- gpio_regs->out = SBCOMMON_GPIO_LEDS;
-
- /*--------------------------------------------------------------------+
- | Initialize EBC CONFIG
- +-------------------------------------------------------------------*/
- mtebc(EBC0_CFG,
- EBC_CFG_LE_UNLOCK | EBC_CFG_PTD_ENABLE |
- EBC_CFG_RTC_64PERCLK | EBC_CFG_ATC_PREVIOUS |
- EBC_CFG_DTC_PREVIOUS | EBC_CFG_CTC_PREVIOUS |
- EBC_CFG_EMC_DEFAULT | EBC_CFG_PME_DISABLE |
- EBC_CFG_PR_32);
-
- /*--------------------------------------------------------------------+
- | 1/2 MB FLASH. Initialize bank 0 with default values.
- +-------------------------------------------------------------------*/
- mtebc(PB0AP,
- EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(8) |
- EBC_BXAP_BCE_DISABLE | EBC_BXAP_CSN_ENCODE(1) |
- EBC_BXAP_OEN_ENCODE(1)| EBC_BXAP_WBN_ENCODE(1) |
- EBC_BXAP_WBF_ENCODE(1)| EBC_BXAP_TH_ENCODE(1) |
- EBC_BXAP_RE_DISABLED | EBC_BXAP_BEM_WRITEONLY |
- EBC_BXAP_PEN_DISABLED);
-
- mtebc(PB0CR, EBC_BXCR_BAS_ENCODE(CONFIG_SYS_FLASH_BASE) |
- EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_8BIT);
- /*--------------------------------------------------------------------+
- | 8KB NVRAM/RTC. Initialize bank 1 with default values.
- +-------------------------------------------------------------------*/
- mtebc(PB1AP,
- EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(10) |
- EBC_BXAP_BCE_DISABLE | EBC_BXAP_CSN_ENCODE(1) |
- EBC_BXAP_OEN_ENCODE(1)| EBC_BXAP_WBN_ENCODE(1) |
- EBC_BXAP_WBF_ENCODE(1)| EBC_BXAP_TH_ENCODE(1) |
- EBC_BXAP_RE_DISABLED | EBC_BXAP_BEM_WRITEONLY |
- EBC_BXAP_PEN_DISABLED);
-
- mtebc(PB1CR, EBC_BXCR_BAS_ENCODE(0x48000000) |
- EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_8BIT);
-
- /*--------------------------------------------------------------------+
- | Compact Flash, uses 2 Chip Selects (2 & 6)
- +-------------------------------------------------------------------*/
- mtebc(PB2AP,
- EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(8) |
- EBC_BXAP_BCE_DISABLE | EBC_BXAP_CSN_ENCODE(1) |
- EBC_BXAP_OEN_ENCODE(1)| EBC_BXAP_WBN_ENCODE(1) |
- EBC_BXAP_WBF_ENCODE(0)| EBC_BXAP_TH_ENCODE(1) |
- EBC_BXAP_RE_DISABLED | EBC_BXAP_BEM_WRITEONLY |
- EBC_BXAP_PEN_DISABLED);
-
- mtebc(PB2CR, EBC_BXCR_BAS_ENCODE(0xF0000000) |
- EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_16BIT);
-
- /*--------------------------------------------------------------------+
- | KaRef Scan FPGA. Initialize bank 3 with default values.
- +-------------------------------------------------------------------*/
- mtebc(PB5AP,
- EBC_BXAP_RE_ENABLED | EBC_BXAP_SOR_NONDELAYED |
- EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(3) |
- EBC_BXAP_TH_ENCODE(1) | EBC_BXAP_WBF_ENCODE(0) |
- EBC_BXAP_CSN_ENCODE(1) | EBC_BXAP_PEN_DISABLED |
- EBC_BXAP_OEN_ENCODE(1) | EBC_BXAP_BEM_RW);
-
- mtebc(PB5CR, EBC_BXCR_BAS_ENCODE(0x48200000) |
- EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_32BIT);
-
- /*--------------------------------------------------------------------+
- | MAC A & B for Kamino. OFEM FPGA decodes the addresses
- | Initialize bank 4 with default values.
- +-------------------------------------------------------------------*/
- mtebc(PB4AP,
- EBC_BXAP_RE_ENABLED | EBC_BXAP_SOR_NONDELAYED |
- EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(3) |
- EBC_BXAP_TH_ENCODE(1) | EBC_BXAP_WBF_ENCODE(0) |
- EBC_BXAP_CSN_ENCODE(1) | EBC_BXAP_PEN_DISABLED |
- EBC_BXAP_OEN_ENCODE(1) | EBC_BXAP_BEM_RW);
-
- mtebc(PB4CR, EBC_BXCR_BAS_ENCODE(0x48600000) |
- EBC_BXCR_BS_2MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_32BIT);
-
- /*--------------------------------------------------------------------+
- | OFEM FPGA Initialize bank 5 with default values.
- +-------------------------------------------------------------------*/
- mtebc(PB3AP,
- EBC_BXAP_RE_ENABLED | EBC_BXAP_SOR_NONDELAYED |
- EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(3) |
- EBC_BXAP_TH_ENCODE(1) | EBC_BXAP_WBF_ENCODE(0) |
- EBC_BXAP_CSN_ENCODE(1) | EBC_BXAP_PEN_DISABLED |
- EBC_BXAP_OEN_ENCODE(1) | EBC_BXAP_BEM_RW);
-
-
- mtebc(PB3CR, EBC_BXCR_BAS_ENCODE(0x48400000) |
- EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_32BIT);
-
-
- /*--------------------------------------------------------------------+
- | Compact Flash, uses 2 Chip Selects (2 & 6)
- +-------------------------------------------------------------------*/
- mtebc(PB6AP,
- EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(8) |
- EBC_BXAP_BCE_DISABLE | EBC_BXAP_CSN_ENCODE(1) |
- EBC_BXAP_OEN_ENCODE(1)| EBC_BXAP_WBN_ENCODE(1) |
- EBC_BXAP_WBF_ENCODE(0)| EBC_BXAP_TH_ENCODE(1) |
- EBC_BXAP_RE_DISABLED | EBC_BXAP_BEM_WRITEONLY |
- EBC_BXAP_PEN_DISABLED);
-
- mtebc(PB6CR, EBC_BXCR_BAS_ENCODE(0xF0100000) |
- EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_16BIT);
-
- /*--------------------------------------------------------------------+
- | BME-32. Initialize bank 7 with default values.
- +-------------------------------------------------------------------*/
- mtebc(PB7AP,
- EBC_BXAP_RE_ENABLED | EBC_BXAP_SOR_NONDELAYED |
- EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(3) |
- EBC_BXAP_TH_ENCODE(1) | EBC_BXAP_WBF_ENCODE(0) |
- EBC_BXAP_CSN_ENCODE(1) | EBC_BXAP_PEN_DISABLED |
- EBC_BXAP_OEN_ENCODE(1) | EBC_BXAP_BEM_RW);
-
- mtebc(PB7CR, EBC_BXCR_BAS_ENCODE(0x48500000) |
- EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_32BIT);
-
- /*--------------------------------------------------------------------+
- * Setup the interrupt controller polarities, triggers, etc.
- +-------------------------------------------------------------------*/
- /*
- * Because of the interrupt handling rework to handle 440GX interrupts
- * with the common code, we needed to change names of the UIC registers.
- * Here the new relationship:
- *
- * U-Boot name 440GX name
- * -----------------------
- * UIC0 UICB0
- * UIC1 UIC0
- * UIC2 UIC1
- * UIC3 UIC2
- */
- mtdcr (UIC1SR, 0xffffffff); /* clear all */
- mtdcr (UIC1ER, 0x00000000); /* disable all */
- mtdcr (UIC1CR, 0x00000000); /* all non- critical */
- mtdcr (UIC1PR, 0xfffffe03); /* polarity */
- mtdcr (UIC1TR, 0x01c00000); /* trigger edge vs level */
- mtdcr (UIC1VR, 0x00000001); /* int31 highest, base=0x000 */
- mtdcr (UIC1SR, 0xffffffff); /* clear all */
-
- mtdcr (UIC2SR, 0xffffffff); /* clear all */
- mtdcr (UIC2ER, 0x00000000); /* disable all */
- mtdcr (UIC2CR, 0x00000000); /* all non-critical */
- mtdcr (UIC2PR, 0xffffc8ff); /* polarity */
- mtdcr (UIC2TR, 0x00ff0000); /* trigger edge vs level */
- mtdcr (UIC2VR, 0x00000001); /* int31 highest, base=0x000 */
- mtdcr (UIC2SR, 0xffffffff); /* clear all */
-
- mtdcr (UIC3SR, 0xffffffff); /* clear all */
- mtdcr (UIC3ER, 0x00000000); /* disable all */
- mtdcr (UIC3CR, 0x00000000); /* all non-critical */
- mtdcr (UIC3PR, 0xffff83ff); /* polarity */
- mtdcr (UIC3TR, 0x00ff8c0f); /* trigger edge vs level */
- mtdcr (UIC3VR, 0x00000001); /* int31 highest, base=0x000 */
- mtdcr (UIC3SR, 0xffffffff); /* clear all */
-
- mtdcr (UIC0SR, 0xfc000000); /* clear all */
- mtdcr (UIC0ER, 0x00000000); /* disable all */
- mtdcr (UIC0CR, 0x00000000); /* all non-critical */
- mtdcr (UIC0PR, 0xfc000000);
- mtdcr (UIC0TR, 0x00000000);
- mtdcr (UIC0VR, 0x00000001);
-
- fpga_init();
-
- return 0;
-}
-
-
-/*************************************************************************
- * checkboard
- *
- * Dump pertinent info to the console
- ************************************************************************/
-int checkboard (void)
-{
- sys_info_t sysinfo;
- unsigned char brd_rev, brd_id;
- unsigned short sernum;
- unsigned char scan_rev, scan_id, ofem_rev=0, ofem_id=0;
- unsigned char ofem_brd_rev, ofem_brd_id;
- KAREF_FPGA_REGS_ST *karef_ps;
- OFEM_FPGA_REGS_ST *ofem_ps;
-
- karef_ps = (KAREF_FPGA_REGS_ST *)CONFIG_SYS_KAREF_FPGA_BASE;
- ofem_ps = (OFEM_FPGA_REGS_ST *)CONFIG_SYS_OFEM_FPGA_BASE;
-
- scan_id = (unsigned char)((karef_ps->revision_ul &
- SAND_HAL_KA_SC_SCAN_REVISION_IDENTIFICATION_MASK)
- >> SAND_HAL_KA_SC_SCAN_REVISION_IDENTIFICATION_SHIFT);
-
- scan_rev = (unsigned char)((karef_ps->revision_ul & SAND_HAL_KA_SC_SCAN_REVISION_REVISION_MASK)
- >> SAND_HAL_KA_SC_SCAN_REVISION_REVISION_SHIFT);
-
- brd_rev = (unsigned char)((karef_ps->boardinfo_ul & SAND_HAL_KA_SC_SCAN_BRD_INFO_BRD_REV_MASK)
- >> SAND_HAL_KA_SC_SCAN_BRD_INFO_BRD_REV_SHIFT);
-
- brd_id = (unsigned char)((karef_ps->boardinfo_ul & SAND_HAL_KA_SC_SCAN_BRD_INFO_BRD_ID_MASK)
- >> SAND_HAL_KA_SC_SCAN_BRD_INFO_BRD_ID_SHIFT);
-
- ofem_brd_id = (unsigned char)((karef_ps->boardinfo_ul & SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_ID_MASK)
- >> SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_ID_SHIFT);
-
- ofem_brd_rev = (unsigned char)((karef_ps->boardinfo_ul & SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_REV_MASK)
- >> SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_REV_SHIFT);
-
- if (0xF != ofem_brd_id) {
- ofem_id = (unsigned char)((ofem_ps->revision_ul &
- SAND_HAL_KA_OF_OFEM_REVISION_IDENTIFICATION_MASK)
- >> SAND_HAL_KA_OF_OFEM_REVISION_IDENTIFICATION_SHIFT);
-
- ofem_rev = (unsigned char)((ofem_ps->revision_ul &
- SAND_HAL_KA_OF_OFEM_REVISION_REVISION_MASK)
- >> SAND_HAL_KA_OF_OFEM_REVISION_REVISION_SHIFT);
- }
-
- get_sys_info (&sysinfo);
-
- sernum = sbcommon_get_serial_number();
-
- printf ("Board: Sandburst Corporation Kamino Reference Design "
- "Serial Number: %d\n", sernum);
- printf ("%s\n", KAREF_U_BOOT_REL_STR);
-
- printf ("Built %s %s by %s\n", U_BOOT_DATE, U_BOOT_TIME, BUILDUSER);
- if (sbcommon_get_master()) {
- printf("Slot 0 - Master\nSlave board");
- if (sbcommon_secondary_present())
- printf(" present\n");
- else
- printf(" not detected\n");
- } else {
- printf("Slot 1 - Slave\n\n");
- }
-
- printf ("ScanFPGA ID:\t0x%02X\tRev: 0x%02X\n", scan_id, scan_rev);
- printf ("Board Rev:\t0x%02X\tID: 0x%02X\n", brd_rev, brd_id);
- if(0xF != ofem_brd_id) {
- printf("OFemFPGA ID:\t0x%02X\tRev: 0x%02X\n", ofem_id, ofem_rev);
- printf("OFEM Board Rev:\t0x%02X\tID: 0x%02X\n", ofem_brd_id, ofem_brd_rev);
- }
-
- /* Fix the ack in the bme 32 */
- udelay(5000);
- out32(CONFIG_SYS_BME32_BASE + 0x0000000C, 0x00000001);
- asm("eieio");
-
-
- return (0);
-}
-
-/*************************************************************************
- * misc_init_f
- *
- * Initialize I2C bus one to gain access to the fans
- ************************************************************************/
-int misc_init_f (void)
-{
- /* Turn on fans 3 & 4 */
- sbcommon_fans();
-
- return (0);
-}
-
-/*************************************************************************
- * misc_init_r
- *
- * Do nothing.
- ************************************************************************/
-int misc_init_r (void)
-{
- unsigned short sernum;
- char envstr[255];
- uchar enetaddr[6];
- KAREF_FPGA_REGS_ST *karef_ps;
- OFEM_FPGA_REGS_ST *ofem_ps;
-
- if(NULL != getenv("secondserial")) {
- puts("secondserial is set, switching to second serial port\n");
- setenv("stderr", "serial1");
- setenv("stdout", "serial1");
- setenv("stdin", "serial1");
- }
-
- setenv("ubrelver", KAREF_U_BOOT_REL_STR);
-
- memset(envstr, 0, 255);
- sprintf (envstr, "Built %s %s by %s",
- U_BOOT_DATE, U_BOOT_TIME, BUILDUSER);
- setenv("bldstr", envstr);
- saveenv();
-
- if( getenv("autorecover")) {
- setenv("autorecover", NULL);
- saveenv();
- sernum = sbcommon_get_serial_number();
-
- printf("\nSetting up environment for automatic filesystem recovery\n");
- /*
- * Setup default bootargs
- */
- memset(envstr, 0, 255);
-
- sprintf(envstr, "console=ttyS0,9600 root=/dev/ram0 "
- "rw ip=10.100.70.%d:::255.255.0.0:karef%d:eth0:none idebus=33",
- sernum, sernum);
- setenv("bootargs", envstr);
-
- /*
- * Setup Default boot command
- */
- setenv("bootcmd", "fatload ide 0 8000000 uimage.karef;"
- "fatload ide 0 8100000 pramdisk;"
- "bootm 8000000 8100000");
-
- printf("Done. Please type allow the system to continue to boot\n");
- }
-
- if( getenv("fakeled")) {
- karef_ps = (KAREF_FPGA_REGS_ST *)CONFIG_SYS_KAREF_FPGA_BASE;
- ofem_ps = (OFEM_FPGA_REGS_ST *)CONFIG_SYS_OFEM_FPGA_BASE;
- ofem_ps->control_ul &= ~SAND_HAL_KA_SC_SCAN_CNTL_FAULT_LED_MASK;
- karef_ps->control_ul &= ~SAND_HAL_KA_OF_OFEM_CNTL_FAULT_LED_MASK;
- setenv("bootdelay", "-1");
- saveenv();
- printf("fakeled is set. use 'setenv fakeled ; setenv bootdelay 5 ; saveenv' to recover\n");
- }
-
-#ifdef CONFIG_HAS_ETH0
- if (!eth_getenv_enetaddr("ethaddr", enetaddr)) {
- board_get_enetaddr(0, enetaddr);
- eth_setenv_enetaddr("ethaddr", enetaddr);
- }
-#endif
-
-#ifdef CONFIG_HAS_ETH1
- if (!eth_getenv_enetaddr("eth1addr", enetaddr)) {
- board_get_enetaddr(1, enetaddr);
- eth_setenv_enetaddr("eth1addr", enetaddr);
- }
-#endif
-
-#ifdef CONFIG_HAS_ETH2
- if (!eth_getenv_enetaddr("eth2addr", enetaddr)) {
- board_get_enetaddr(2, enetaddr);
- eth_setenv_enetaddr("eth2addr", enetaddr);
- }
-#endif
-
-#ifdef CONFIG_HAS_ETH3
- if (!eth_getenv_enetaddr("eth3addr", enetaddr)) {
- board_get_enetaddr(3, enetaddr);
- eth_setenv_enetaddr("eth3addr", enetaddr);
- }
-#endif
-
- return (0);
-}
-
-/*************************************************************************
- * ide_set_reset
- ************************************************************************/
-#ifdef CONFIG_IDE_RESET
-void ide_set_reset(int on)
-{
- KAREF_FPGA_REGS_ST *karef_ps;
- /* TODO: ide reset */
- karef_ps = (KAREF_FPGA_REGS_ST *)CONFIG_SYS_KAREF_FPGA_BASE;
-
- if (on) {
- karef_ps->reset_ul &= ~SAND_HAL_KA_SC_SCAN_RESET_CF_RESET_N_MASK;
- } else {
- karef_ps->reset_ul |= SAND_HAL_KA_SC_SCAN_RESET_CF_RESET_N_MASK;
- }
-}
-#endif /* CONFIG_IDE_RESET */
-
-/*************************************************************************
- * fpga_init
- ************************************************************************/
-void fpga_init(void)
-{
- KAREF_FPGA_REGS_ST *karef_ps;
- OFEM_FPGA_REGS_ST *ofem_ps;
- unsigned char ofem_id;
- unsigned long tmp;
-
- /* Ensure we have power all around */
- udelay(500);
-
- karef_ps = (KAREF_FPGA_REGS_ST *)CONFIG_SYS_KAREF_FPGA_BASE;
- tmp =
- SAND_HAL_KA_SC_SCAN_RESET_CF_RESET_N_MASK |
- SAND_HAL_KA_SC_SCAN_RESET_BME_RESET_N_MASK |
- SAND_HAL_KA_SC_SCAN_RESET_KA_RESET_N_MASK |
- SAND_HAL_KA_SC_SCAN_RESET_SLAVE_RESET_N_MASK |
- SAND_HAL_KA_SC_SCAN_RESET_OFEM_RESET_N_MASK |
- SAND_HAL_KA_SC_SCAN_RESET_IFE_A_RESET_N_MASK |
- SAND_HAL_KA_SC_SCAN_RESET_I2C_MUX1_RESET_N_MASK |
- SAND_HAL_KA_SC_SCAN_RESET_PHY0_RESET_N_MASK |
- SAND_HAL_KA_SC_SCAN_RESET_PHY1_RESET_N_MASK;
-
- karef_ps->reset_ul = tmp;
-
- /*
- * Wait a bit to allow the ofem fpga to get its brains
- */
- udelay(5000);
-
- /*
- * Check to see if the ofem is there
- */
- ofem_id = (unsigned char)((karef_ps->boardinfo_ul & SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_ID_MASK)
- >> SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_ID_SHIFT);
- if(0xF != ofem_id) {
- tmp =
- SAND_HAL_KA_OF_OFEM_RESET_I2C_MUX0_RESET_N_MASK |
- SAND_HAL_KA_OF_OFEM_RESET_LOCH0_RESET_N_MASK |
- SAND_HAL_KA_OF_OFEM_RESET_MAC0_RESET_N_MASK;
-
- ofem_ps = (OFEM_FPGA_REGS_ST *)CONFIG_SYS_OFEM_FPGA_BASE;
- ofem_ps->reset_ul = tmp;
-
- ofem_ps->control_ul |= 1 < SAND_HAL_KA_OF_OFEM_CNTL_FAULT_LED_SHIFT;
- }
-
- karef_ps->control_ul |= 1 << SAND_HAL_KA_SC_SCAN_CNTL_FAULT_LED_SHIFT;
-
- asm("eieio");
-
- return;
-}
-
-int karefSetupVars(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
- unsigned short sernum;
- char envstr[255];
-
- sernum = sbcommon_get_serial_number();
-
- memset(envstr, 0, 255);
- /*
- * Setup our ip address
- */
- sprintf(envstr, "10.100.70.%d", sernum);
-
- setenv("ipaddr", envstr);
- /*
- * Setup the host ip address
- */
- setenv("serverip", "10.100.17.10");
-
- /*
- * Setup default bootargs
- */
- memset(envstr, 0, 255);
-
- sprintf(envstr, "console=ttyS0,9600 root=/dev/nfs "
- "rw nfsroot=10.100.17.10:/home/metrobox/mbc70.%d "
- "nfsaddrs=10.100.70.%d:10.100.17.10:10.100.1.1:"
- "255.255.0.0:karef%d.sandburst.com:eth0:none idebus=33",
- sernum, sernum, sernum);
-
- setenv("bootargs_nfs", envstr);
- setenv("bootargs", envstr);
-
- /*
- * Setup CF bootargs
- */
- memset(envstr, 0, 255);
-
- sprintf(envstr, "console=ttyS0,9600 root=/dev/hda2 "
- "rw ip=10.100.70.%d:::255.255.0.0:karef%d:eth0:none idebus=33",
- sernum, sernum);
-
- setenv("bootargs_cf", envstr);
-
- /*
- * Setup Default boot command
- */
- setenv("bootcmd_tftp", "tftp 8000000 uImage.karef;bootm 8000000");
- setenv("bootcmd", "tftp 8000000 uImage.karef;bootm 8000000");
-
- /*
- * Setup compact flash boot command
- */
- setenv("bootcmd_cf", "fatload ide 0 8000000 uimage.karef;bootm 8000000");
-
- saveenv();
-
- return(1);
-}
-
-int karefRecover(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
- unsigned short sernum;
- char envstr[255];
-
- sernum = sbcommon_get_serial_number();
-
- printf("\nSetting up environment for filesystem recovery\n");
- /*
- * Setup default bootargs
- */
- memset(envstr, 0, 255);
-
- sprintf(envstr, "console=ttyS0,9600 root=/dev/ram0 "
- "rw ip=10.100.70.%d:::255.255.0.0:karef%d:eth0:none",
- sernum, sernum);
- setenv("bootargs", envstr);
-
- /*
- * Setup Default boot command
- */
-
- setenv("bootcmd", "fatload ide 0 8000000 uimage.karef;"
- "fatload ide 0 8100000 pramdisk;"
- "bootm 8000000 8100000");
-
- printf("Done. Please type boot<cr>.\nWhen the kernel has booted"
- " please type fsrecover.sh<cr>\n");
-
- return(1);
-}
-
-U_BOOT_CMD(kasetup, 1, 1, karefSetupVars,
- "Set environment to factory defaults", "");
-
-U_BOOT_CMD(karecover, 1, 1, karefRecover,
- "Set environment to allow for fs recovery", "");
generated by cgit (git 2.34.1) at 2024-12-28 11:47:16 +0000