diff options
Diffstat (limited to 'board/st/stm32mp1/stm32mp1.c')
| -rw-r--r-- | board/st/stm32mp1/stm32mp1.c | 168 |
1 files changed, 168 insertions, 0 deletions
diff --git a/board/st/stm32mp1/stm32mp1.c b/board/st/stm32mp1/stm32mp1.c index bfc8ab64d3..54feca0ecf 100644 --- a/board/st/stm32mp1/stm32mp1.c +++ b/board/st/stm32mp1/stm32mp1.c @@ -5,13 +5,181 @@ #include <config.h> #include <common.h> #include <led.h> +#include <clk.h> +#include <dm.h> +#include <generic-phy.h> +#include <phy.h> +#include <reset.h> +#include <usb.h> #include <asm/arch/stm32.h> +#include <asm/io.h> +#include <power/regulator.h> +#include <usb/dwc2_udc.h> /* * Get a global data pointer */ DECLARE_GLOBAL_DATA_PTR; +#define STM32MP_GUSBCFG 0x40002407 + +#define STM32MP_GGPIO 0x38 +#define STM32MP_GGPIO_VBUS_SENSING BIT(21) + +static struct dwc2_plat_otg_data stm32mp_otg_data = { + .usb_gusbcfg = STM32MP_GUSBCFG, +}; + +static struct reset_ctl usbotg_reset; + +int board_usb_init(int index, enum usb_init_type init) +{ + struct fdtdec_phandle_args args; + struct udevice *dev; + const void *blob = gd->fdt_blob; + struct clk clk; + struct phy phy; + int node; + int phy_provider; + int ret; + + /* find the usb otg node */ + node = fdt_node_offset_by_compatible(blob, -1, "snps,dwc2"); + if (node < 0) { + debug("Not found usb_otg device\n"); + return -ENODEV; + } + + if (!fdtdec_get_is_enabled(blob, node)) { + debug("stm32 usbotg is disabled in the device tree\n"); + return -ENODEV; + } + + /* Enable clock */ + ret = fdtdec_parse_phandle_with_args(blob, node, "clocks", + "#clock-cells", 0, 0, &args); + if (ret) { + debug("usbotg has no clocks defined in the device tree\n"); + return ret; + } + + ret = uclass_get_device_by_of_offset(UCLASS_CLK, args.node, &dev); + if (ret) + return ret; + + if (args.args_count != 1) { + debug("Can't find clock ID in the device tree\n"); + return -ENODATA; + } + + clk.dev = dev; + clk.id = args.args[0]; + + ret = clk_enable(&clk); + if (ret) { + debug("Failed to enable usbotg clock\n"); + return ret; + } + + /* Reset */ + ret = fdtdec_parse_phandle_with_args(blob, node, "resets", + "#reset-cells", 0, 0, &args); + if (ret) { + debug("usbotg has no resets defined in the device tree\n"); + goto clk_err; + } + + ret = uclass_get_device_by_of_offset(UCLASS_RESET, args.node, &dev); + if (ret || args.args_count != 1) + goto clk_err; + + usbotg_reset.dev = dev; + usbotg_reset.id = args.args[0]; + + reset_assert(&usbotg_reset); + udelay(2); + reset_deassert(&usbotg_reset); + + /* Get USB PHY */ + ret = fdtdec_parse_phandle_with_args(blob, node, "phys", + "#phy-cells", 0, 0, &args); + if (!ret) { + phy_provider = fdt_parent_offset(blob, args.node); + ret = uclass_get_device_by_of_offset(UCLASS_PHY, + phy_provider, &dev); + if (ret) + goto clk_err; + + phy.dev = dev; + phy.id = fdtdec_get_uint(blob, args.node, "reg", -1); + + ret = generic_phy_power_on(&phy); + if (ret) { + debug("unable to power on the phy\n"); + goto clk_err; + } + + ret = generic_phy_init(&phy); + if (ret) { + debug("failed to init usb phy\n"); + goto phy_power_err; + } + } + + /* Parse and store data needed for gadget */ + stm32mp_otg_data.regs_otg = fdtdec_get_addr(blob, node, "reg"); + if (stm32mp_otg_data.regs_otg == FDT_ADDR_T_NONE) { + debug("usbotg: can't get base address\n"); + ret = -ENODATA; + goto phy_init_err; + } + + stm32mp_otg_data.rx_fifo_sz = fdtdec_get_int(blob, node, + "g-rx-fifo-size", 0); + stm32mp_otg_data.np_tx_fifo_sz = fdtdec_get_int(blob, node, + "g-np-tx-fifo-size", 0); + stm32mp_otg_data.tx_fifo_sz = fdtdec_get_int(blob, node, + "g-tx-fifo-size", 0); + /* Enable voltage level detector */ + if (!(fdtdec_parse_phandle_with_args(blob, node, "usb33d-supply", + NULL, 0, 0, &args))) { + if (!uclass_get_device_by_of_offset(UCLASS_REGULATOR, + args.node, &dev)) { + ret = regulator_set_enable(dev, true); + if (ret) { + debug("Failed to enable usb33d\n"); + goto phy_init_err; + } + } + } + /* Enable vbus sensing */ + setbits_le32(stm32mp_otg_data.regs_otg + STM32MP_GGPIO, + STM32MP_GGPIO_VBUS_SENSING); + + return dwc2_udc_probe(&stm32mp_otg_data); + +phy_init_err: + generic_phy_exit(&phy); + +phy_power_err: + generic_phy_power_off(&phy); + +clk_err: + clk_disable(&clk); + + return ret; +} + +int board_usb_cleanup(int index, enum usb_init_type init) +{ + /* Reset usbotg */ + reset_assert(&usbotg_reset); + udelay(2); + reset_deassert(&usbotg_reset); + + return 0; +} + int board_late_init(void) { return 0; |