diff options
Diffstat (limited to 'board/theadorable')
| -rw-r--r-- | board/theadorable/theadorable.c | 38 |
1 files changed, 33 insertions, 5 deletions
diff --git a/board/theadorable/theadorable.c b/board/theadorable/theadorable.c index dd6def5e6e..d42350319c 100644 --- a/board/theadorable/theadorable.c +++ b/board/theadorable/theadorable.c @@ -1,11 +1,15 @@ // SPDX-License-Identifier: GPL-2.0+ /* - * Copyright (C) 2015-2016 Stefan Roese <sr@denx.de> + * Copyright (C) 2015-2019 Stefan Roese <sr@denx.de> */ #include <common.h> +#include <console.h> #include <i2c.h> #include <pci.h> +#if !defined(CONFIG_SPL_BUILD) +#include <bootcount.h> +#endif #include <asm/gpio.h> #include <asm/io.h> #include <asm/arch/cpu.h> @@ -42,6 +46,7 @@ DECLARE_GLOBAL_DATA_PTR; #define STM_I2C_BUS 1 #define STM_I2C_ADDR 0x27 #define REBOOT_DELAY 1000 /* reboot-delay in ms */ +#define ABORT_TIMEOUT 3000 /* 3 seconds reboot abort timeout */ /* DDR3 static configuration */ static MV_DRAM_MC_INIT ddr3_theadorable[MV_MAX_DDR3_STATIC_SIZE] = { @@ -127,15 +132,15 @@ MV_DRAM_MODES *ddr3_get_static_ddr_mode(void) return &board_ddr_modes[0]; } -MV_BIN_SERDES_CFG *board_serdes_cfg_get(u8 pex_mode) +MV_BIN_SERDES_CFG *board_serdes_cfg_get(void) { return &theadorable_serdes_cfg[0]; } u8 board_sat_r_get(u8 dev_num, u8 reg) { - /* Bit 0 enables PCI 2.0 link capabilities instead of PCI 1.x */ - return 0x01; + /* Bit x enables PCI 2.0 link capabilities instead of PCI 1.x */ + return 0xe; /* PEX port 0 is PCIe Gen1, PEX port 1..3 PCIe Gen2 */ } int board_early_init_f(void) @@ -218,7 +223,7 @@ int board_eth_init(bd_t *bis) } #endif -#ifdef CONFIG_BOARD_LATE_INIT +#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_BOARD_LATE_INIT) int board_late_init(void) { pci_dev_t bdf; @@ -232,6 +237,7 @@ int board_late_init(void) */ bdf = pci_find_device(PCI_VENDOR_ID_PLX, 0x8619, 0); if (bdf == -1) { + unsigned long start_time = get_timer(0); u8 i2c_buf[8]; int ret; @@ -239,6 +245,28 @@ int board_late_init(void) bootcount = bootcount_load(); printf("Failed to find PLX PEX-switch (bootcount=%ld)\n", bootcount); + + /* + * The user can exit this boot-loop in the error case by + * hitting Ctrl-C. So wait some time for this key here. + */ + printf("Continue booting with Ctrl-C, otherwise rebooting\n"); + do { + /* Handle control-c and timeouts */ + if (ctrlc()) { + printf("PEX error boot-loop aborted!\n"); + return 0; + } + } while (get_timer(start_time) < ABORT_TIMEOUT); + + + /* + * At this stage the bootcounter has not been incremented + * yet. We need to do this manually here to get an actually + * working bootcounter in this error case. + */ + bootcount_inc(); + if (bootcount > PEX_SWITCH_NOT_FOUNT_LIMIT) { printf("Issuing power-switch via uC!\n"); |