diff options
Diffstat (limited to 'board/theobroma-systems/puma_rk3399/puma-rk3399.c')
| -rw-r--r-- | board/theobroma-systems/puma_rk3399/puma-rk3399.c | 56 |
1 files changed, 20 insertions, 36 deletions
diff --git a/board/theobroma-systems/puma_rk3399/puma-rk3399.c b/board/theobroma-systems/puma_rk3399/puma-rk3399.c index 45d56cd99e..2b4988e2d2 100644 --- a/board/theobroma-systems/puma_rk3399/puma-rk3399.c +++ b/board/theobroma-systems/puma_rk3399/puma-rk3399.c @@ -3,60 +3,48 @@ * * SPDX-License-Identifier: GPL-2.0+ */ + #include <common.h> #include <dm.h> #include <misc.h> -#include <ram.h> #include <dm/pinctrl.h> #include <dm/uclass-internal.h> #include <asm/setup.h> #include <asm/arch/periph.h> #include <power/regulator.h> +#include <spl.h> #include <u-boot/sha256.h> DECLARE_GLOBAL_DATA_PTR; int board_init(void) { - struct udevice *pinctrl, *regulator; int ret; /* - * The PWM does not have decicated interrupt number in dts and can - * not get periph_id by pinctrl framework, so let's init them here. - * The PWM2 and PWM3 are for pwm regulators. + * We need to call into regulators_enable_boot_on() again, as the call + * during SPL may have not included all regulators. */ - ret = uclass_get_device(UCLASS_PINCTRL, 0, &pinctrl); - if (ret) { - debug("%s: Cannot find pinctrl device\n", __func__); - goto out; - } - - ret = pinctrl_request_noflags(pinctrl, PERIPH_ID_PWM2); - if (ret) { - debug("%s PWM2 pinctrl init fail!\n", __func__); - goto out; - } - - /* rk3399 need to init vdd_center to get the correct output voltage */ - ret = regulator_get_by_platname("vdd_center", ®ulator); + ret = regulators_enable_boot_on(false); if (ret) - debug("%s: Cannot get vdd_center regulator\n", __func__); + debug("%s: Cannot enable boot on regulator\n", __func__); - ret = regulator_get_by_platname("vcc5v0_host", ®ulator); - if (ret) { - debug("%s vcc5v0_host init fail! ret %d\n", __func__, ret); - goto out; - } + return 0; +} - ret = regulator_set_enable(regulator, true); - if (ret) { - debug("%s vcc5v0-host-en set fail!\n", __func__); - goto out; - } +void spl_board_init(void) +{ + int ret; -out: - return 0; + /* + * Turning the eMMC and SPI back on (if disabled via the Qseven + * BIOS_ENABLE) signal is done through a always-on regulator). + */ + ret = regulators_enable_boot_on(false); + if (ret) + debug("%s: Cannot enable boot on regulator\n", __func__); + + preloader_console_init(); } static void setup_macaddr(void) @@ -91,8 +79,6 @@ static void setup_macaddr(void) mac_addr[0] |= 0x02; /* set local assignment bit (IEEE802) */ eth_env_set_enetaddr("ethaddr", mac_addr); #endif - - return; } static void setup_serial(void) @@ -147,8 +133,6 @@ static void setup_serial(void) env_set("cpuid#", cpuid_str); env_set("serial#", serialno_str); #endif - - return; } int misc_init_r(void) |