diff options
Diffstat (limited to 'board/ti/am335x/board.c')
| -rw-r--r-- | board/ti/am335x/board.c | 70 |
1 files changed, 69 insertions, 1 deletions
diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c index ed4229e258..48e68967e5 100644 --- a/board/ti/am335x/board.c +++ b/board/ti/am335x/board.c @@ -73,6 +73,17 @@ static inline int board_is_idk(void) return !strncmp(header.config, "SKU#02", 6); } +static int board_is_gp_evm(void) +{ + return !strncmp("A33515BB", header.name, 8); +} + +int board_is_evm_15_or_later(void) +{ + return (!strncmp("A33515BB", header.name, 8) && + strncmp("1.5", header.version, 3) <= 0); +} + /* * Read header information from EEPROM into global structure. */ @@ -197,6 +208,14 @@ static const struct ddr_data ddr3_data = { .datadldiff0 = PHY_DLL_LOCK_DIFF, }; +static const struct ddr_data ddr3_evm_data = { + .datardsratio0 = MT41J512M8RH125_RD_DQS, + .datawdsratio0 = MT41J512M8RH125_WR_DQS, + .datafwsratio0 = MT41J512M8RH125_PHY_FIFO_WE, + .datawrsratio0 = MT41J512M8RH125_PHY_WR_DATA, + .datadldiff0 = PHY_DLL_LOCK_DIFF, +}; + static const struct cmd_control ddr3_cmd_ctrl_data = { .cmd0csratio = MT41J128MJT125_RATIO, .cmd0dldiff = MT41J128MJT125_DLL_LOCK_DIFF, @@ -211,6 +230,20 @@ static const struct cmd_control ddr3_cmd_ctrl_data = { .cmd2iclkout = MT41J128MJT125_INVERT_CLKOUT, }; +static const struct cmd_control ddr3_evm_cmd_ctrl_data = { + .cmd0csratio = MT41J512M8RH125_RATIO, + .cmd0dldiff = MT41J512M8RH125_DLL_LOCK_DIFF, + .cmd0iclkout = MT41J512M8RH125_INVERT_CLKOUT, + + .cmd1csratio = MT41J512M8RH125_RATIO, + .cmd1dldiff = MT41J512M8RH125_DLL_LOCK_DIFF, + .cmd1iclkout = MT41J512M8RH125_INVERT_CLKOUT, + + .cmd2csratio = MT41J512M8RH125_RATIO, + .cmd2dldiff = MT41J512M8RH125_DLL_LOCK_DIFF, + .cmd2iclkout = MT41J512M8RH125_INVERT_CLKOUT, +}; + static struct emif_regs ddr3_emif_reg_data = { .sdram_config = MT41J128MJT125_EMIF_SDCFG, .ref_ctrl = MT41J128MJT125_EMIF_SDREF, @@ -220,6 +253,16 @@ static struct emif_regs ddr3_emif_reg_data = { .zq_config = MT41J128MJT125_ZQ_CFG, .emif_ddr_phy_ctlr_1 = MT41J128MJT125_EMIF_READ_LATENCY, }; + +static struct emif_regs ddr3_evm_emif_reg_data = { + .sdram_config = MT41J512M8RH125_EMIF_SDCFG, + .ref_ctrl = MT41J512M8RH125_EMIF_SDREF, + .sdram_tim1 = MT41J512M8RH125_EMIF_TIM1, + .sdram_tim2 = MT41J512M8RH125_EMIF_TIM2, + .sdram_tim3 = MT41J512M8RH125_EMIF_TIM3, + .zq_config = MT41J512M8RH125_ZQ_CFG, + .emif_ddr_phy_ctlr_1 = MT41J512M8RH125_EMIF_READ_LATENCY, +}; #endif /* @@ -301,6 +344,9 @@ void s_init(void) if (board_is_evm_sk() || board_is_bone_lt()) config_ddr(303, MT41J128MJT125_IOCTRL_VALUE, &ddr3_data, &ddr3_cmd_ctrl_data, &ddr3_emif_reg_data); + else if (board_is_evm_15_or_later()) + config_ddr(303, MT41J512M8RH125_IOCTRL_VALUE, &ddr3_evm_data, + &ddr3_evm_cmd_ctrl_data, &ddr3_evm_emif_reg_data); else config_ddr(266, MT47H128M16RT25E_IOCTRL_VALUE, &ddr2_data, &ddr2_cmd_ctrl_data, &ddr2_emif_reg_data); @@ -393,7 +439,7 @@ int board_eth_init(bd_t *bis) uint32_t mac_hi, mac_lo; if (!eth_getenv_enetaddr("ethaddr", mac_addr)) { - debug("<ethaddr> not set. Reading from E-fuse\n"); + printf("<ethaddr> not set. Reading from E-fuse\n"); /* try reading mac address from efuse */ mac_lo = readl(&cdev->macid0l); mac_hi = readl(&cdev->macid0h); @@ -425,6 +471,28 @@ int board_eth_init(bd_t *bis) printf("Error %d registering CPSW switch\n", rv); else n += rv; + + /* + * + * CPSW RGMII Internal Delay Mode is not supported in all PVT + * operating points. So we must set the TX clock delay feature + * in the AR8051 PHY. Since we only support a single ethernet + * device in U-Boot, we only do this for the first instance. + */ +#define AR8051_PHY_DEBUG_ADDR_REG 0x1d +#define AR8051_PHY_DEBUG_DATA_REG 0x1e +#define AR8051_DEBUG_RGMII_CLK_DLY_REG 0x5 +#define AR8051_RGMII_TX_CLK_DLY 0x100 + + if (board_is_evm_sk() || board_is_gp_evm()) { + const char *devname; + devname = miiphy_get_current_dev(); + + miiphy_write(devname, 0x0, AR8051_PHY_DEBUG_ADDR_REG, + AR8051_DEBUG_RGMII_CLK_DLY_REG); + miiphy_write(devname, 0x0, AR8051_PHY_DEBUG_DATA_REG, + AR8051_RGMII_TX_CLK_DLY); + } #endif try_usbether: #if defined(CONFIG_USB_ETHER) && !defined(CONFIG_SPL_BUILD) |