diff options
Diffstat (limited to 'board/toradex/apalis_imx6')
| -rw-r--r-- | board/toradex/apalis_imx6/1066mhz_4x128mx16.cfg | 47 | ||||
| -rw-r--r-- | board/toradex/apalis_imx6/1066mhz_4x256mx16.cfg | 47 | ||||
| -rw-r--r-- | board/toradex/apalis_imx6/MAINTAINERS | 4 | ||||
| -rw-r--r-- | board/toradex/apalis_imx6/apalis_imx6.c | 341 | ||||
| -rw-r--r-- | board/toradex/apalis_imx6/apalis_imx6q.cfg | 33 | ||||
| -rw-r--r-- | board/toradex/apalis_imx6/clocks.cfg | 41 | ||||
| -rw-r--r-- | board/toradex/apalis_imx6/ddr-setup.cfg | 96 | ||||
| -rw-r--r-- | board/toradex/apalis_imx6/do_fuse.c | 2 | ||||
| -rw-r--r-- | board/toradex/apalis_imx6/pf0100.c | 206 | ||||
| -rw-r--r-- | board/toradex/apalis_imx6/pf0100.h | 59 |
10 files changed, 328 insertions, 548 deletions
diff --git a/board/toradex/apalis_imx6/1066mhz_4x128mx16.cfg b/board/toradex/apalis_imx6/1066mhz_4x128mx16.cfg deleted file mode 100644 index 29d1c3126c..0000000000 --- a/board/toradex/apalis_imx6/1066mhz_4x128mx16.cfg +++ /dev/null @@ -1,47 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2013 Boundary Devices - * Copyright (C) 2014-2016 Toradex AG - */ - -DATA 4, MX6_MMDC_P0_MDPDC, 0x00020036 -DATA 4, MX6_MMDC_P0_MDCFG0, 0x555A7954 -DATA 4, MX6_MMDC_P0_MDCFG1, 0xDB328F64 -DATA 4, MX6_MMDC_P0_MDCFG2, 0x01FF00DB -DATA 4, MX6_MMDC_P0_MDRWD, 0x000026D2 -DATA 4, MX6_MMDC_P0_MDOR, 0x005A1023 -DATA 4, MX6_MMDC_P0_MDOTC, 0x09555050 -DATA 4, MX6_MMDC_P0_MDPDC, 0x00025576 -DATA 4, MX6_MMDC_P0_MDASP, 0x00000027 -DATA 4, MX6_MMDC_P0_MDCTL, 0x831A0000 -DATA 4, MX6_MMDC_P0_MDSCR, 0x04088032 -DATA 4, MX6_MMDC_P0_MDSCR, 0x00008033 -DATA 4, MX6_MMDC_P0_MDSCR, 0x00428031 -DATA 4, MX6_MMDC_P0_MDSCR, 0x19308030 -DATA 4, MX6_MMDC_P0_MDSCR, 0x04008040 -DATA 4, MX6_MMDC_P0_MPZQHWCTRL, 0xA1390003 -DATA 4, MX6_MMDC_P1_MPZQHWCTRL, 0xA1390003 -DATA 4, MX6_MMDC_P0_MDREF, 0x00005800 -DATA 4, MX6_MMDC_P0_MPODTCTRL, 0x00000000 -DATA 4, MX6_MMDC_P1_MPODTCTRL, 0x00000000 - -DATA 4, MX6_MMDC_P0_MPDGCTRL0, 0x432A0338 -DATA 4, MX6_MMDC_P0_MPDGCTRL1, 0x03260324 -DATA 4, MX6_MMDC_P1_MPDGCTRL0, 0x43340344 -DATA 4, MX6_MMDC_P1_MPDGCTRL1, 0x031E027C - -DATA 4, MX6_MMDC_P0_MPRDDLCTL, 0x33272D2E -DATA 4, MX6_MMDC_P1_MPRDDLCTL, 0x2F312B37 - -DATA 4, MX6_MMDC_P0_MPWRDLCTL, 0x3A35433C -DATA 4, MX6_MMDC_P1_MPWRDLCTL, 0x4336453F - -DATA 4, MX6_MMDC_P0_MPWLDECTRL0, 0x0009000E -DATA 4, MX6_MMDC_P0_MPWLDECTRL1, 0x0018000B -DATA 4, MX6_MMDC_P1_MPWLDECTRL0, 0x00060015 -DATA 4, MX6_MMDC_P1_MPWLDECTRL1, 0x0006000E - -DATA 4, MX6_MMDC_P0_MPMUR0, 0x00000800 -DATA 4, MX6_MMDC_P1_MPMUR0, 0x00000800 -DATA 4, MX6_MMDC_P0_MDSCR, 0x00000000 -DATA 4, MX6_MMDC_P0_MAPSR, 0x00011006 diff --git a/board/toradex/apalis_imx6/1066mhz_4x256mx16.cfg b/board/toradex/apalis_imx6/1066mhz_4x256mx16.cfg deleted file mode 100644 index 02e90dd5e6..0000000000 --- a/board/toradex/apalis_imx6/1066mhz_4x256mx16.cfg +++ /dev/null @@ -1,47 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2013 Boundary Devices - * Copyright (C) 2014-2016 Toradex AG - */ - -DATA 4, MX6_MMDC_P0_MDPDC, 0x00020036 -DATA 4, MX6_MMDC_P0_MDCFG0, 0x898E78f5 -DATA 4, MX6_MMDC_P0_MDCFG1, 0xff328f64 -DATA 4, MX6_MMDC_P0_MDCFG2, 0x01FF00DB -DATA 4, MX6_MMDC_P0_MDRWD, 0x000026D2 -DATA 4, MX6_MMDC_P0_MDOR, 0x008E1023 -DATA 4, MX6_MMDC_P0_MDOTC, 0x09444040 -DATA 4, MX6_MMDC_P0_MDPDC, 0x00025576 -DATA 4, MX6_MMDC_P0_MDASP, 0x00000047 -DATA 4, MX6_MMDC_P0_MDCTL, 0x841A0000 -DATA 4, MX6_MMDC_P0_MDSCR, 0x02888032 -DATA 4, MX6_MMDC_P0_MDSCR, 0x00008033 -DATA 4, MX6_MMDC_P0_MDSCR, 0x00048031 -DATA 4, MX6_MMDC_P0_MDSCR, 0x19408030 -DATA 4, MX6_MMDC_P0_MDSCR, 0x04008040 -DATA 4, MX6_MMDC_P0_MPZQHWCTRL, 0xA1390003 -DATA 4, MX6_MMDC_P1_MPZQHWCTRL, 0xA1390003 -DATA 4, MX6_MMDC_P0_MDREF, 0x00007800 -DATA 4, MX6_MMDC_P0_MPODTCTRL, 0x00022227 -DATA 4, MX6_MMDC_P1_MPODTCTRL, 0x00022227 - -DATA 4, MX6_MMDC_P0_MPDGCTRL0, 0x03300338 -DATA 4, MX6_MMDC_P0_MPDGCTRL1, 0x03240324 -DATA 4, MX6_MMDC_P1_MPDGCTRL0, 0x03440350 -DATA 4, MX6_MMDC_P1_MPDGCTRL1, 0x032C0308 - -DATA 4, MX6_MMDC_P0_MPRDDLCTL, 0x40363C3E -DATA 4, MX6_MMDC_P1_MPRDDLCTL, 0x3C3E3C46 - -DATA 4, MX6_MMDC_P0_MPWRDLCTL, 0x403E463E -DATA 4, MX6_MMDC_P1_MPWRDLCTL, 0x4A384C46 - -DATA 4, MX6_MMDC_P0_MPWLDECTRL0, 0x0009000E -DATA 4, MX6_MMDC_P0_MPWLDECTRL1, 0x0018000B -DATA 4, MX6_MMDC_P1_MPWLDECTRL0, 0x00060015 -DATA 4, MX6_MMDC_P1_MPWLDECTRL1, 0x0006000E - -DATA 4, MX6_MMDC_P0_MPMUR0, 0x00000800 -DATA 4, MX6_MMDC_P1_MPMUR0, 0x00000800 -DATA 4, MX6_MMDC_P0_MDSCR, 0x00000000 -DATA 4, MX6_MMDC_P0_MAPSR, 0x00011006 diff --git a/board/toradex/apalis_imx6/MAINTAINERS b/board/toradex/apalis_imx6/MAINTAINERS index 2c70ab4fbd..7efe816a78 100644 --- a/board/toradex/apalis_imx6/MAINTAINERS +++ b/board/toradex/apalis_imx6/MAINTAINERS @@ -1,9 +1,9 @@ Apalis iMX6 M: Max Krummenacher <max.krummenacher@toradex.com> W: http://developer.toradex.com/software/linux/linux-software +W: https://www.toradex.com/community S: Maintained F: board/toradex/apalis_imx6/ F: include/configs/apalis_imx6.h F: configs/apalis_imx6_defconfig -F: configs/apalis_imx6_nospl_com_defconfig -F: configs/apalis_imx6_nospl_it_defconfig +F: arch/arm/dts/imx6-apalis.dts diff --git a/board/toradex/apalis_imx6/apalis_imx6.c b/board/toradex/apalis_imx6/apalis_imx6.c index d11207c7f4..3e59185438 100644 --- a/board/toradex/apalis_imx6/apalis_imx6.c +++ b/board/toradex/apalis_imx6/apalis_imx6.c @@ -2,38 +2,33 @@ /* * Copyright (C) 2010-2013 Freescale Semiconductor, Inc. * Copyright (C) 2013, Boundary Devices <info@boundarydevices.com> - * Copyright (C) 2014-2016, Toradex AG + * Copyright (C) 2014-2019, Toradex AG * copied from nitrogen6x */ #include <common.h> #include <dm.h> -#include <environment.h> + +#include <ahci.h> #include <asm/arch/clock.h> #include <asm/arch/crm_regs.h> -#include <asm/arch/mxc_hdmi.h> #include <asm/arch/imx-regs.h> -#include <asm/arch/iomux.h> -#include <asm/arch/sys_proto.h> -#include <asm/arch/mx6-pins.h> #include <asm/arch/mx6-ddr.h> +#include <asm/arch/mx6-pins.h> +#include <asm/arch/mxc_hdmi.h> +#include <asm/arch/sys_proto.h> #include <asm/bootm.h> #include <asm/gpio.h> -#include <asm/io.h> +#include <asm/mach-imx/boot_mode.h> #include <asm/mach-imx/iomux-v3.h> -#include <asm/mach-imx/mxc_i2c.h> #include <asm/mach-imx/sata.h> -#include <asm/mach-imx/boot_mode.h> #include <asm/mach-imx/video.h> +#include <dm/device-internal.h> #include <dm/platform_data/serial_mxc.h> -#include <dm/platdata.h> +#include <dwc_ahsata.h> +#include <environment.h> #include <fsl_esdhc.h> -#include <i2c.h> -#include <input.h> #include <imx_thermal.h> -#include <linux/errno.h> -#include <malloc.h> -#include <mmc.h> #include <micrel.h> #include <miiphy.h> #include <netdev.h> @@ -50,40 +45,30 @@ DECLARE_GLOBAL_DATA_PTR; PAD_CTL_SRE_FAST | PAD_CTL_HYS) #define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP | \ + PAD_CTL_SPEED_LOW | PAD_CTL_DSE_40ohm | \ + PAD_CTL_SRE_FAST | PAD_CTL_HYS) + +#define USDHC_EMMC_PAD_CTRL (PAD_CTL_PUS_47K_UP | \ PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm | \ PAD_CTL_SRE_FAST | PAD_CTL_HYS) #define ENET_PAD_CTRL (PAD_CTL_PUS_100K_UP | \ PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS) -#define SPI_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_SPEED_MED | \ - PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST) - -#define BUTTON_PAD_CTRL (PAD_CTL_PUS_100K_UP | \ - PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS) - -#define I2C_PAD_CTRL (PAD_CTL_PUS_100K_UP | \ - PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \ - PAD_CTL_ODE | PAD_CTL_SRE_FAST) - #define WEAK_PULLUP (PAD_CTL_PUS_100K_UP | \ PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \ PAD_CTL_SRE_SLOW) -#define NO_PULLUP ( \ - PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \ - PAD_CTL_SRE_SLOW) - #define WEAK_PULLDOWN (PAD_CTL_PUS_100K_DOWN | \ PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \ PAD_CTL_HYS | PAD_CTL_SRE_SLOW) #define TRISTATE (PAD_CTL_HYS | PAD_CTL_SPEED_MED) -#define OUTPUT_40OHM (PAD_CTL_SPEED_MED|PAD_CTL_DSE_40ohm) - #define OUTPUT_RGB (PAD_CTL_SPEED_MED|PAD_CTL_DSE_60ohm|PAD_CTL_SRE_FAST) +#define APALIS_IMX6_SATA_INIT_RETRIES 10 + int dram_init(void) { /* use the DDR controllers configured size */ @@ -103,63 +88,7 @@ iomux_v3_cfg_t const uart1_pads_dte[] = { MX6_PAD_CSI0_DAT11__UART1_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), }; -#define PC MUX_PAD_CTRL(I2C_PAD_CTRL) -/* Apalis I2C1 */ -struct i2c_pads_info i2c_pad_info1 = { - .scl = { - .i2c_mode = MX6_PAD_CSI0_DAT9__I2C1_SCL | PC, - .gpio_mode = MX6_PAD_CSI0_DAT9__GPIO5_IO27 | PC, - .gp = IMX_GPIO_NR(5, 27) - }, - .sda = { - .i2c_mode = MX6_PAD_CSI0_DAT8__I2C1_SDA | PC, - .gpio_mode = MX6_PAD_CSI0_DAT8__GPIO5_IO26 | PC, - .gp = IMX_GPIO_NR(5, 26) - } -}; - -/* Apalis local, PMIC, SGTL5000, STMPE811 */ -struct i2c_pads_info i2c_pad_info_loc = { - .scl = { - .i2c_mode = MX6_PAD_KEY_COL3__I2C2_SCL | PC, - .gpio_mode = MX6_PAD_KEY_COL3__GPIO4_IO12 | PC, - .gp = IMX_GPIO_NR(4, 12) - }, - .sda = { - .i2c_mode = MX6_PAD_KEY_ROW3__I2C2_SDA | PC, - .gpio_mode = MX6_PAD_KEY_ROW3__GPIO4_IO13 | PC, - .gp = IMX_GPIO_NR(4, 13) - } -}; - -/* Apalis I2C3 / CAM */ -struct i2c_pads_info i2c_pad_info3 = { - .scl = { - .i2c_mode = MX6_PAD_EIM_D17__I2C3_SCL | PC, - .gpio_mode = MX6_PAD_EIM_D17__GPIO3_IO17 | PC, - .gp = IMX_GPIO_NR(3, 17) - }, - .sda = { - .i2c_mode = MX6_PAD_EIM_D18__I2C3_SDA | PC, - .gpio_mode = MX6_PAD_EIM_D18__GPIO3_IO18 | PC, - .gp = IMX_GPIO_NR(3, 18) - } -}; - -/* Apalis I2C2 / DDC */ -struct i2c_pads_info i2c_pad_info_ddc = { - .scl = { - .i2c_mode = MX6_PAD_EIM_EB2__HDMI_TX_DDC_SCL | PC, - .gpio_mode = MX6_PAD_EIM_EB2__GPIO2_IO30 | PC, - .gp = IMX_GPIO_NR(2, 30) - }, - .sda = { - .i2c_mode = MX6_PAD_EIM_D16__HDMI_TX_DDC_SDA | PC, - .gpio_mode = MX6_PAD_EIM_D16__GPIO3_IO16 | PC, - .gp = IMX_GPIO_NR(3, 16) - } -}; - +#if defined(CONFIG_FSL_ESDHC) && defined(CONFIG_SPL_BUILD) /* Apalis MMC1 */ iomux_v3_cfg_t const usdhc1_pads[] = { MX6_PAD_SD1_CLK__SD1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), @@ -190,18 +119,19 @@ iomux_v3_cfg_t const usdhc2_pads[] = { /* eMMC */ iomux_v3_cfg_t const usdhc3_pads[] = { - MX6_PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD3_DAT4__SD3_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD3_DAT5__SD3_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD3_DAT6__SD3_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD3_DAT7__SD3_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD3_RST__GPIO7_IO08 | MUX_PAD_CTRL(WEAK_PULLUP), + MX6_PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_EMMC_PAD_CTRL), + MX6_PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_EMMC_PAD_CTRL), + MX6_PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_EMMC_PAD_CTRL), + MX6_PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_EMMC_PAD_CTRL), + MX6_PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_EMMC_PAD_CTRL), + MX6_PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_EMMC_PAD_CTRL), + MX6_PAD_SD3_DAT4__SD3_DATA4 | MUX_PAD_CTRL(USDHC_EMMC_PAD_CTRL), + MX6_PAD_SD3_DAT5__SD3_DATA5 | MUX_PAD_CTRL(USDHC_EMMC_PAD_CTRL), + MX6_PAD_SD3_DAT6__SD3_DATA6 | MUX_PAD_CTRL(USDHC_EMMC_PAD_CTRL), + MX6_PAD_SD3_DAT7__SD3_DATA7 | MUX_PAD_CTRL(USDHC_EMMC_PAD_CTRL), + MX6_PAD_SD3_RST__GPIO7_IO08 | MUX_PAD_CTRL(WEAK_PULLUP) | MUX_MODE_SION, }; +#endif /* CONFIG_FSL_ESDHC & CONFIG_SPL_BUILD */ int mx6_rgmii_rework(struct phy_device *phydev) { @@ -241,7 +171,8 @@ iomux_v3_cfg_t const enet_pads[] = { MX6_PAD_RGMII_RD3__RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL), MX6_PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL), /* KSZ9031 PHY Reset */ - MX6_PAD_ENET_CRS_DV__GPIO1_IO25 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_ENET_CRS_DV__GPIO1_IO25 | MUX_PAD_CTRL(NO_PAD_CTRL) | + MUX_MODE_SION, # define GPIO_ENET_PHY_RESET IMX_GPIO_NR(1, 25) }; @@ -253,6 +184,7 @@ static void setup_iomux_enet(void) static int reset_enet_phy(struct mii_dev *bus) { /* Reset KSZ9031 PHY */ + gpio_request(GPIO_ENET_PHY_RESET, "ETH_RESET#"); gpio_direction_output(GPIO_ENET_PHY_RESET, 0); mdelay(10); gpio_set_value(GPIO_ENET_PHY_RESET, 1); @@ -263,15 +195,24 @@ static int reset_enet_phy(struct mii_dev *bus) /* mux the Apalis GPIO pins, so they can be used from the U-Boot cmdline */ iomux_v3_cfg_t const gpio_pads[] = { /* Apalis GPIO1 - GPIO8 */ - MX6_PAD_NANDF_D4__GPIO2_IO04 | MUX_PAD_CTRL(WEAK_PULLUP), - MX6_PAD_NANDF_D5__GPIO2_IO05 | MUX_PAD_CTRL(WEAK_PULLUP), - MX6_PAD_NANDF_D6__GPIO2_IO06 | MUX_PAD_CTRL(WEAK_PULLUP), - MX6_PAD_NANDF_D7__GPIO2_IO07 | MUX_PAD_CTRL(WEAK_PULLUP), - MX6_PAD_NANDF_RB0__GPIO6_IO10 | MUX_PAD_CTRL(WEAK_PULLUP), - MX6_PAD_NANDF_WP_B__GPIO6_IO09 | MUX_PAD_CTRL(WEAK_PULLUP), - MX6_PAD_GPIO_2__GPIO1_IO02 | MUX_PAD_CTRL(WEAK_PULLDOWN), - MX6_PAD_GPIO_6__GPIO1_IO06 | MUX_PAD_CTRL(WEAK_PULLUP), - MX6_PAD_GPIO_4__GPIO1_IO04 | MUX_PAD_CTRL(WEAK_PULLUP), + MX6_PAD_NANDF_D4__GPIO2_IO04 | MUX_PAD_CTRL(WEAK_PULLUP) | + MUX_MODE_SION, + MX6_PAD_NANDF_D5__GPIO2_IO05 | MUX_PAD_CTRL(WEAK_PULLUP) | + MUX_MODE_SION, + MX6_PAD_NANDF_D6__GPIO2_IO06 | MUX_PAD_CTRL(WEAK_PULLUP) | + MUX_MODE_SION, + MX6_PAD_NANDF_D7__GPIO2_IO07 | MUX_PAD_CTRL(WEAK_PULLUP) | + MUX_MODE_SION, + MX6_PAD_NANDF_RB0__GPIO6_IO10 | MUX_PAD_CTRL(WEAK_PULLUP) | + MUX_MODE_SION, + MX6_PAD_NANDF_WP_B__GPIO6_IO09 | MUX_PAD_CTRL(WEAK_PULLUP) | + MUX_MODE_SION, + MX6_PAD_GPIO_2__GPIO1_IO02 | MUX_PAD_CTRL(WEAK_PULLDOWN) | + MUX_MODE_SION, + MX6_PAD_GPIO_6__GPIO1_IO06 | MUX_PAD_CTRL(WEAK_PULLUP) | + MUX_MODE_SION, + MX6_PAD_GPIO_4__GPIO1_IO04 | MUX_PAD_CTRL(WEAK_PULLUP) | + MUX_MODE_SION, }; static void setup_iomux_gpio(void) @@ -281,7 +222,7 @@ static void setup_iomux_gpio(void) iomux_v3_cfg_t const usb_pads[] = { /* USBH_EN */ - MX6_PAD_GPIO_0__GPIO1_IO00 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_GPIO_0__GPIO1_IO00 | MUX_PAD_CTRL(NO_PAD_CTRL) | MUX_MODE_SION, # define GPIO_USBH_EN IMX_GPIO_NR(1, 0) /* USB_VBUS_DET */ MX6_PAD_EIM_D28__GPIO3_IO28 | MUX_PAD_CTRL(NO_PAD_CTRL), @@ -289,7 +230,7 @@ iomux_v3_cfg_t const usb_pads[] = { /* USBO1_ID */ MX6_PAD_ENET_RX_ER__USB_OTG_ID | MUX_PAD_CTRL(WEAK_PULLUP), /* USBO1_EN */ - MX6_PAD_EIM_D22__GPIO3_IO22 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_EIM_D22__GPIO3_IO22 | MUX_PAD_CTRL(NO_PAD_CTRL) | MUX_MODE_SION, # define GPIO_USBO_EN IMX_GPIO_NR(3, 22) }; @@ -297,8 +238,11 @@ iomux_v3_cfg_t const usb_pads[] = { * UARTs are used in DTE mode, switch the mode on all UARTs before * any pinmuxing connects a (DCE) output to a transceiver output. */ +#define UCR3 0x88 /* FIFO Control Register */ +#define UCR3_RI BIT(8) /* RIDELT DTE mode */ +#define UCR3_DCD BIT(9) /* DCDDELT DTE mode */ #define UFCR 0x90 /* FIFO Control Register */ -#define UFCR_DCEDTE (1<<6) /* DCE=0 */ +#define UFCR_DCEDTE BIT(6) /* DCE=0 */ static void setup_dtemode_uart(void) { @@ -306,6 +250,11 @@ static void setup_dtemode_uart(void) setbits_le32((u32 *)(UART2_BASE + UFCR), UFCR_DCEDTE); setbits_le32((u32 *)(UART4_BASE + UFCR), UFCR_DCEDTE); setbits_le32((u32 *)(UART5_BASE + UFCR), UFCR_DCEDTE); + + clrbits_le32((u32 *)(UART1_BASE + UCR3), UCR3_DCD | UCR3_RI); + clrbits_le32((u32 *)(UART2_BASE + UCR3), UCR3_DCD | UCR3_RI); + clrbits_le32((u32 *)(UART4_BASE + UCR3), UCR3_DCD | UCR3_RI); + clrbits_le32((u32 *)(UART5_BASE + UCR3), UCR3_DCD | UCR3_RI); } static void setup_dcemode_uart(void) { @@ -321,7 +270,6 @@ static void setup_iomux_dte_uart(void) imx_iomux_v3_setup_multiple_pads(uart1_pads_dte, ARRAY_SIZE(uart1_pads_dte)); } - static void setup_iomux_dce_uart(void) { setup_dcemode_uart(); @@ -335,32 +283,10 @@ int board_ehci_hcd_init(int port) imx_iomux_v3_setup_multiple_pads(usb_pads, ARRAY_SIZE(usb_pads)); return 0; } - -int board_ehci_power(int port, int on) -{ - switch (port) { - case 0: - /* control OTG power */ - gpio_direction_output(GPIO_USBO_EN, on); - mdelay(100); - break; - case 1: - /* Control MXM USBH */ - gpio_direction_output(GPIO_USBH_EN, on); - mdelay(2); - /* Control onboard USB Hub VBUS */ - gpio_direction_output(GPIO_USB_VBUS_DET, on); - mdelay(100); - break; - default: - break; - } - return 0; -} #endif -#ifdef CONFIG_FSL_ESDHC -/* use the following sequence: eMMC, MMC, SD */ +#if defined(CONFIG_FSL_ESDHC) && defined(CONFIG_SPL_BUILD) +/* use the following sequence: eMMC, MMC1, SD1 */ struct fsl_esdhc_cfg usdhc_cfg[CONFIG_SYS_FSL_USDHC_NUM] = { {USDHC3_BASE_ADDR}, {USDHC1_BASE_ADDR}, @@ -374,10 +300,12 @@ int board_mmc_getcd(struct mmc *mmc) switch (cfg->esdhc_base) { case USDHC1_BASE_ADDR: + gpio_request(GPIO_MMC_CD, "MMC_CD"); gpio_direction_input(GPIO_MMC_CD); ret = !gpio_get_value(GPIO_MMC_CD); break; case USDHC2_BASE_ADDR: + gpio_request(GPIO_MMC_CD, "SD_CD"); gpio_direction_input(GPIO_SD_CD); ret = !gpio_get_value(GPIO_SD_CD); break; @@ -388,43 +316,6 @@ int board_mmc_getcd(struct mmc *mmc) int board_mmc_init(bd_t *bis) { -#ifndef CONFIG_SPL_BUILD - s32 status = 0; - u32 index = 0; - - usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); - usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK); - usdhc_cfg[2].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK); - - usdhc_cfg[0].max_bus_width = 8; - usdhc_cfg[1].max_bus_width = 8; - usdhc_cfg[2].max_bus_width = 4; - - for (index = 0; index < CONFIG_SYS_FSL_USDHC_NUM; ++index) { - switch (index) { - case 0: - imx_iomux_v3_setup_multiple_pads( - usdhc3_pads, ARRAY_SIZE(usdhc3_pads)); - break; - case 1: - imx_iomux_v3_setup_multiple_pads( - usdhc1_pads, ARRAY_SIZE(usdhc1_pads)); - break; - case 2: - imx_iomux_v3_setup_multiple_pads( - usdhc2_pads, ARRAY_SIZE(usdhc2_pads)); - break; - default: - printf("Warning: you configured more USDHC controllers (%d) then supported by the board (%d)\n", - index + 1, CONFIG_SYS_FSL_USDHC_NUM); - return status; - } - - status |= fsl_esdhc_initialize(bis, &usdhc_cfg[index]); - } - - return status; -#else struct src *psrc = (struct src *)SRC_BASE_ADDR; unsigned reg = readl(&psrc->sbmr1) >> 11; /* @@ -463,9 +354,8 @@ int board_mmc_init(bd_t *bis) } return fsl_esdhc_initialize(bis, &usdhc_cfg[0]); -#endif } -#endif +#endif /* CONFIG_FSL_ESDHC & CONFIG_SPL_BUILD */ int board_phy_config(struct phy_device *phydev) { @@ -489,6 +379,7 @@ int board_eth_init(bd_t *bis) bus = fec_get_miibus(base, -1); if (!bus) return 0; + bus->reset = reset_enet_phy; /* scan PHY 4,5,6,7 */ phydev = phy_find_by_mask(bus, (0xf << 4), PHY_INTERFACE_MODE_RGMII); @@ -497,6 +388,7 @@ int board_eth_init(bd_t *bis) puts("no PHY found\n"); return 0; } + printf("using PHY at %d\n", phydev->addr); ret = fec_probe(bis, -1, base, bus, phydev); if (ret) { @@ -504,7 +396,8 @@ int board_eth_init(bd_t *bis) free(phydev); free(bus); } -#endif +#endif /* CONFIG_FEC_MXC */ + return 0; } @@ -520,18 +413,21 @@ static iomux_v3_cfg_t const pwr_intb_pads[] = { static iomux_v3_cfg_t const backlight_pads[] = { /* Backlight on RGB connector: J15 */ - MX6_PAD_EIM_DA13__GPIO3_IO13 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_EIM_DA13__GPIO3_IO13 | MUX_PAD_CTRL(NO_PAD_CTRL) | + MUX_MODE_SION, #define RGB_BACKLIGHT_GP IMX_GPIO_NR(3, 13) /* additional CPU pin on BKL_PWM, keep in tristate */ MX6_PAD_EIM_DA14__GPIO3_IO14 | MUX_PAD_CTRL(TRISTATE), /* Backlight PWM, used as GPIO in U-Boot */ - MX6_PAD_SD4_DAT2__GPIO2_IO10 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_SD4_DAT2__GPIO2_IO10 | MUX_PAD_CTRL(NO_PAD_CTRL) | + MUX_MODE_SION, #define RGB_BACKLIGHTPWM_GP IMX_GPIO_NR(2, 10) /* buffer output enable 0: buffer enabled */ - MX6_PAD_EIM_A25__GPIO5_IO02 | MUX_PAD_CTRL(WEAK_PULLUP), + MX6_PAD_EIM_A25__GPIO5_IO02 | MUX_PAD_CTRL(WEAK_PULLUP) | MUX_MODE_SION, #define RGB_BACKLIGHTPWM_OE IMX_GPIO_NR(5, 2) /* PSAVE# integrated VDAC */ - MX6_PAD_EIM_BCLK__GPIO6_IO31 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_EIM_BCLK__GPIO6_IO31 | MUX_PAD_CTRL(NO_PAD_CTRL) | + MUX_MODE_SION, #define VGA_PSAVE_NOT_GP IMX_GPIO_NR(6, 31) }; @@ -571,12 +467,6 @@ static void do_enable_hdmi(struct display_info_t const *dev) imx_enable_hdmi_phy(); } -static int detect_i2c(struct display_info_t const *dev) -{ - return (0 == i2c_set_bus_num(dev->bus)) && - (0 == i2c_probe(dev->addr)); -} - static void enable_lvds(struct display_info_t const *dev) { struct iomuxc *iomux = (struct iomuxc *) @@ -670,7 +560,6 @@ struct display_info_t const displays[] = {{ .bus = -1, .addr = 0, .pixfmt = IPU_PIX_FMT_LVDS666, - .detect = detect_i2c, .enable = enable_lvds, .mode = { .name = "wsvga-lvds", @@ -741,6 +630,9 @@ static void setup_display(void) imx_iomux_v3_setup_multiple_pads(backlight_pads, ARRAY_SIZE(backlight_pads)); /* use 0 for EDT 7", use 1 for LG fullHD panel */ + gpio_request(RGB_BACKLIGHTPWM_GP, "BKL1_PWM"); + gpio_request(RGB_BACKLIGHTPWM_OE, "BKL1_PWM_EN"); + gpio_request(RGB_BACKLIGHT_GP, "BKL1_ON"); gpio_direction_output(RGB_BACKLIGHTPWM_GP, 0); gpio_direction_output(RGB_BACKLIGHTPWM_OE, 0); gpio_direction_output(RGB_BACKLIGHT_GP, 1); @@ -782,10 +674,6 @@ int board_init(void) /* address of boot parameters */ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; - setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1); - setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info_loc); - setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info3); - #if defined(CONFIG_VIDEO_IPUV3) setup_display(); #endif @@ -835,16 +723,17 @@ int board_late_init(void) #endif /* CONFIG_TDX_APALIS_IMX6_V1_0 */ #endif /* CONFIG_REVISION_TAG */ - return 0; -} -#endif /* CONFIG_BOARD_LATE_INIT */ +#ifdef CONFIG_CMD_USB_SDP + if (is_boot_from_usb()) { + printf("Serial Downloader recovery mode, using sdp command\n"); + env_set("bootdelay", "0"); + env_set("bootcmd", "sdp 0"); + } +#endif /* CONFIG_CMD_USB_SDP */ -#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_SYSTEM_SETUP) -int ft_system_setup(void *blob, bd_t *bd) -{ return 0; } -#endif +#endif /* CONFIG_BOARD_LATE_INIT */ int checkboard(void) { @@ -1143,7 +1032,6 @@ MX6_MMDC_P0_MDSCR, 0x00000000, MX6_MMDC_P0_MAPSR, 0x00011006, }; - static void ccgr_init(void) { struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; @@ -1204,7 +1092,7 @@ void board_init_f(ulong dummy) ccgr_init(); gpr_init(); - /* iomux and setup of i2c */ + /* iomux */ board_early_init_f(); /* setup GP timer */ @@ -1232,7 +1120,7 @@ void reset_cpu(ulong addr) { } -#endif +#endif /* CONFIG_SPL_BUILD */ static struct mxc_serial_platdata mxc_serial_plat = { .reg = (struct mxc_uart *)UART1_BASE, @@ -1243,3 +1131,52 @@ U_BOOT_DEVICE(mxc_serial) = { .name = "serial_mxc", .platdata = &mxc_serial_plat, }; + +#if CONFIG_IS_ENABLED(AHCI) +static int sata_imx_probe(struct udevice *dev) +{ + int i, err; + + for (i = 0; i < APALIS_IMX6_SATA_INIT_RETRIES; i++) { + err = setup_sata(); + if (err) { + printf("SATA setup failed: %d\n", err); + return err; + } + + udelay(100); + + err = dwc_ahsata_probe(dev); + if (!err) + break; + + /* There is no device on the SATA port */ + if (sata_dm_port_status(0, 0) == 0) + break; + + /* There's a device, but link not established. Retry */ + device_remove(dev, DM_REMOVE_NORMAL); + } + + return 0; +} + +struct ahci_ops sata_imx_ops = { + .port_status = dwc_ahsata_port_status, + .reset = dwc_ahsata_bus_reset, + .scan = dwc_ahsata_scan, +}; + +static const struct udevice_id sata_imx_ids[] = { + { .compatible = "fsl,imx6q-ahci" }, + { } +}; + +U_BOOT_DRIVER(sata_imx) = { + .name = "dwc_ahci", + .id = UCLASS_AHCI, + .of_match = sata_imx_ids, + .ops = &sata_imx_ops, + .probe = sata_imx_probe, +}; +#endif /* AHCI */ diff --git a/board/toradex/apalis_imx6/apalis_imx6q.cfg b/board/toradex/apalis_imx6/apalis_imx6q.cfg deleted file mode 100644 index 739b1b7061..0000000000 --- a/board/toradex/apalis_imx6/apalis_imx6q.cfg +++ /dev/null @@ -1,33 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2013 Boundary Devices - * Copyright (C) 2014-2016, Toradex AG - * - * Refer doc/README.imximage for more details about how-to configure - * and create imximage boot image - * - * The syntax is taken as close as possible with the kwbimage - */ - -/* image version */ -IMAGE_VERSION 2 - -/* - * Boot Device : one of - * spi, sd (the board has no nand neither onenand) - */ -BOOT_FROM sd - -#define __ASSEMBLY__ -#include <config.h> -#include "asm/arch/mx6-ddr.h" -#include "asm/arch/iomux.h" -#include "asm/arch/crm_regs.h" - -#include "ddr-setup.cfg" -#if CONFIG_DDR_MB == 2048 -#include "1066mhz_4x256mx16.cfg" -#else -#include "1066mhz_4x128mx16.cfg" -#endif -#include "clocks.cfg" diff --git a/board/toradex/apalis_imx6/clocks.cfg b/board/toradex/apalis_imx6/clocks.cfg deleted file mode 100644 index 1bcbc4fa38..0000000000 --- a/board/toradex/apalis_imx6/clocks.cfg +++ /dev/null @@ -1,41 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2013 Boundary Devices - * Copyright (C) 2014-2016, Toradex AG - * - * Device Configuration Data (DCD) - * - * Each entry must have the format: - * Addr-type Address Value - * - * where: - * Addr-type register length (1,2 or 4 bytes) - * Address absolute address of the register - * value value to be stored in the register - */ - -/* set the default clock gate to save power */ -DATA 4, CCM_CCGR0, 0x00C03F3F -DATA 4, CCM_CCGR1, 0x0030FC03 -DATA 4, CCM_CCGR2, 0x0FFFC000 -DATA 4, CCM_CCGR3, 0x3FF00000 -DATA 4, CCM_CCGR4, 0x00FFF300 -DATA 4, CCM_CCGR5, 0x0F0000C3 -DATA 4, CCM_CCGR6, 0x000003FF - -/* enable AXI cache for VDOA/VPU/IPU */ -DATA 4, MX6_IOMUXC_GPR4, 0xF00000CF -/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */ -DATA 4, MX6_IOMUXC_GPR6, 0x007F007F -DATA 4, MX6_IOMUXC_GPR7, 0x007F007F - -/* - * Setup CCM_CCOSR register as follows: - * - * cko1_en = 1 --> CKO1 enabled - * cko1_div = 111 --> divide by 8 - * cko1_sel = 1011 --> ahb_clk_root - * - * This sets CKO1 at ahb_clk_root/8 = 132/8 = 16.5 MHz - */ -DATA 4, CCM_CCOSR, 0x000000fb diff --git a/board/toradex/apalis_imx6/ddr-setup.cfg b/board/toradex/apalis_imx6/ddr-setup.cfg deleted file mode 100644 index e42e3ce438..0000000000 --- a/board/toradex/apalis_imx6/ddr-setup.cfg +++ /dev/null @@ -1,96 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2013 Boundary Devices - * Copyright (C) 2014-2016, Toradex AG - * - * Device Configuration Data (DCD) - * - * Each entry must have the format: - * Addr-type Address Value - * - * where: - * Addr-type register length (1,2 or 4 bytes) - * Address absolute address of the register - * value value to be stored in the register - */ - -/* - * DDR3 settings - * MX6Q ddr is limited to 1066 Mhz currently 1056 MHz(528 MHz clock), - * memory bus width: 64 bits x16/x32/x64 - * MX6DL ddr is limited to 800 MHz(400 MHz clock) - * memory bus width: 64 bits x16/x32/x64 - * MX6SOLO ddr is limited to 800 MHz(400 MHz clock) - * memory bus width: 32 bits x16/x32 - */ -DATA 4, MX6_IOM_DRAM_SDQS0, 0x00000030 -DATA 4, MX6_IOM_DRAM_SDQS1, 0x00000030 -DATA 4, MX6_IOM_DRAM_SDQS2, 0x00000030 -DATA 4, MX6_IOM_DRAM_SDQS3, 0x00000030 -DATA 4, MX6_IOM_DRAM_SDQS4, 0x00000030 -DATA 4, MX6_IOM_DRAM_SDQS5, 0x00000030 -DATA 4, MX6_IOM_DRAM_SDQS6, 0x00000030 -DATA 4, MX6_IOM_DRAM_SDQS7, 0x00000030 - -DATA 4, MX6_IOM_GRP_B0DS, 0x00000030 -DATA 4, MX6_IOM_GRP_B1DS, 0x00000030 -DATA 4, MX6_IOM_GRP_B2DS, 0x00000030 -DATA 4, MX6_IOM_GRP_B3DS, 0x00000030 -DATA 4, MX6_IOM_GRP_B4DS, 0x00000030 -DATA 4, MX6_IOM_GRP_B5DS, 0x00000030 -DATA 4, MX6_IOM_GRP_B6DS, 0x00000030 -DATA 4, MX6_IOM_GRP_B7DS, 0x00000030 -DATA 4, MX6_IOM_GRP_ADDDS, 0x00000030 -/* 40 Ohm drive strength for cs0/1,sdba2,cke0/1,sdwe */ -DATA 4, MX6_IOM_GRP_CTLDS, 0x00000030 - -DATA 4, MX6_IOM_DRAM_DQM0, 0x00020030 -DATA 4, MX6_IOM_DRAM_DQM1, 0x00020030 -DATA 4, MX6_IOM_DRAM_DQM2, 0x00020030 -DATA 4, MX6_IOM_DRAM_DQM3, 0x00020030 -DATA 4, MX6_IOM_DRAM_DQM4, 0x00020030 -DATA 4, MX6_IOM_DRAM_DQM5, 0x00020030 -DATA 4, MX6_IOM_DRAM_DQM6, 0x00020030 -DATA 4, MX6_IOM_DRAM_DQM7, 0x00020030 - -DATA 4, MX6_IOM_DRAM_CAS, 0x00020030 -DATA 4, MX6_IOM_DRAM_RAS, 0x00020030 -DATA 4, MX6_IOM_DRAM_SDCLK_0, 0x00020030 -DATA 4, MX6_IOM_DRAM_SDCLK_1, 0x00020030 - -DATA 4, MX6_IOM_DRAM_RESET, 0x00020030 -DATA 4, MX6_IOM_DRAM_SDCKE0, 0x00003000 -DATA 4, MX6_IOM_DRAM_SDCKE1, 0x00003000 - -DATA 4, MX6_IOM_DRAM_SDODT0, 0x00003030 -DATA 4, MX6_IOM_DRAM_SDODT1, 0x00003030 - -/* (differential input) */ -DATA 4, MX6_IOM_DDRMODE_CTL, 0x00020000 -/* (differential input) */ -DATA 4, MX6_IOM_GRP_DDRMODE, 0x00020000 -/* disable ddr pullups */ -DATA 4, MX6_IOM_GRP_DDRPKE, 0x00000000 -DATA 4, MX6_IOM_DRAM_SDBA2, 0x00000000 -/* 40 Ohm drive strength for cs0/1,sdba2,cke0/1,sdwe */ -DATA 4, MX6_IOM_GRP_DDR_TYPE, 0x000C0000 - -/* Read data DQ Byte0-3 delay */ -DATA 4, MX6_MMDC_P0_MPRDDQBY0DL, 0x33333333 -DATA 4, MX6_MMDC_P0_MPRDDQBY1DL, 0x33333333 -DATA 4, MX6_MMDC_P0_MPRDDQBY2DL, 0x33333333 -DATA 4, MX6_MMDC_P0_MPRDDQBY3DL, 0x33333333 -DATA 4, MX6_MMDC_P1_MPRDDQBY0DL, 0x33333333 -DATA 4, MX6_MMDC_P1_MPRDDQBY1DL, 0x33333333 -DATA 4, MX6_MMDC_P1_MPRDDQBY2DL, 0x33333333 -DATA 4, MX6_MMDC_P1_MPRDDQBY3DL, 0x33333333 - -/* - * MDMISC mirroring interleaved (row/bank/col) - */ -DATA 4, MX6_MMDC_P0_MDMISC, 0x00081740 - -/* - * MDSCR con_req - */ -DATA 4, MX6_MMDC_P0_MDSCR, 0x00008000 diff --git a/board/toradex/apalis_imx6/do_fuse.c b/board/toradex/apalis_imx6/do_fuse.c index e6793e366a..22d191f52a 100644 --- a/board/toradex/apalis_imx6/do_fuse.c +++ b/board/toradex/apalis_imx6/do_fuse.c @@ -29,7 +29,7 @@ static int mfgr_fuse(void) return CMD_RET_FAILURE; } /* boot cfg */ - fuse_prog(0, 5, 0x00005072); + fuse_prog(0, 5, 0x00005062); /* BT_FUSE_SEL */ fuse_prog(0, 6, 0x00000010); return CMD_RET_SUCCESS; diff --git a/board/toradex/apalis_imx6/pf0100.c b/board/toradex/apalis_imx6/pf0100.c index 7334e92f2e..ebd6418fd4 100644 --- a/board/toradex/apalis_imx6/pf0100.c +++ b/board/toradex/apalis_imx6/pf0100.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0+ /* - * Copyright (C) 2014-2016, Toradex AG + * Copyright (C) 2014-2019, Toradex AG */ /* @@ -9,7 +9,6 @@ #include <common.h> #include <i2c.h> -#include <linux/compiler.h> #include <asm/arch/imx-regs.h> #include <asm/arch/iomux.h> #include <asm/arch/mx6-pins.h> @@ -22,6 +21,8 @@ /* define for PMIC register dump */ /*#define DEBUG */ +#define WARNBAR "@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@\n" + /* use Apalis GPIO1 to switch on VPGM, ON: 1 */ static __maybe_unused iomux_v3_cfg_t const pmic_prog_pads[] = { MX6_PAD_NANDF_D4__GPIO2_IO04 | MUX_PAD_CTRL(NO_PAD_CTRL), @@ -30,99 +31,100 @@ static __maybe_unused iomux_v3_cfg_t const pmic_prog_pads[] = { unsigned pmic_init(void) { + int rc; + struct udevice *dev = NULL; unsigned programmed = 0; uchar bus = 1; uchar devid, revid, val; - puts("PMIC: "); - if (!((0 == i2c_set_bus_num(bus)) && - (0 == i2c_probe(PFUZE100_I2C_ADDR)))) { - puts("i2c bus failed\n"); + puts("PMIC: "); + rc = i2c_get_chip_for_busnum(bus, PFUZE100_I2C_ADDR, 1, &dev); + if (rc) { + printf("failed to get device for PMIC at address 0x%x\n", + PFUZE100_I2C_ADDR); + return 0; + } + + /* check for errors in PMIC fuses */ + if (dm_i2c_read(dev, PFUZE100_INTSTAT3, &val, 1) < 0) { + puts("i2c pmic INTSTAT3 register read failed\n"); + return 0; + } + if (val & PFUZE100_BIT_OTP_ECCI) { + puts("\n" WARNBAR); + puts("WARNING: ecc errors found in pmic fuse banks\n"); + puts(WARNBAR); + } + if (dm_i2c_read(dev, PFUZE100_OTP_ECC_SE1, &val, 1) < 0) { + puts("i2c pmic ECC_SE1 register read failed\n"); + return 0; + } + if (val & PFUZE100_BITS_ECC_SE1) { + puts(WARNBAR); + puts("WARNING: ecc has made bit corrections in banks 1 to 5\n"); + puts(WARNBAR); + } + if (dm_i2c_read(dev, PFUZE100_OTP_ECC_SE2, &val, 1) < 0) { + puts("i2c pmic ECC_SE2 register read failed\n"); + return 0; + } + if (val & PFUZE100_BITS_ECC_SE2) { + puts(WARNBAR); + puts("WARNING: ecc has made bit corrections in banks 6 to 10\n" + ); + puts(WARNBAR); + } + if (dm_i2c_read(dev, PFUZE100_OTP_ECC_DE1, &val, 1) < 0) { + puts("i2c pmic ECC_DE register read failed\n"); return 0; } + if (val & PFUZE100_BITS_ECC_DE1) { + puts(WARNBAR); + puts("ERROR: banks 1 to 5 have uncorrectable bits\n"); + puts(WARNBAR); + } + if (dm_i2c_read(dev, PFUZE100_OTP_ECC_DE2, &val, 1) < 0) { + puts("i2c pmic ECC_DE register read failed\n"); + return 0; + } + if (val & PFUZE100_BITS_ECC_DE2) { + puts(WARNBAR); + puts("ERROR: banks 6 to 10 have uncorrectable bits\n"); + puts(WARNBAR); + } + /* get device ident */ - if (i2c_read(PFUZE100_I2C_ADDR, PFUZE100_DEVICEID, 1, &devid, 1) < 0) { + if (dm_i2c_read(dev, PFUZE100_DEVICEID, &devid, 1) < 0) { puts("i2c pmic devid read failed\n"); return 0; } - if (i2c_read(PFUZE100_I2C_ADDR, PFUZE100_REVID, 1, &revid, 1) < 0) { + if (dm_i2c_read(dev, PFUZE100_REVID, &revid, 1) < 0) { puts("i2c pmic revid read failed\n"); return 0; } - printf("device id: 0x%.2x, revision id: 0x%.2x\n", devid, revid); - -#ifdef DEBUG - { - unsigned i, j; - - for (i = 0; i < 16; i++) - printf("\t%x", i); - for (j = 0; j < 0x80; ) { - printf("\n%2x", j); - for (i = 0; i < 16; i++) { - i2c_read(PFUZE100_I2C_ADDR, j+i, 1, &val, 1); - printf("\t%2x", val); - } - j += 0x10; - } - printf("\nEXT Page 1"); - - val = PFUZE100_PAGE_REGISTER_PAGE1; - if (i2c_write(PFUZE100_I2C_ADDR, PFUZE100_PAGE_REGISTER, 1, - &val, 1)) { - puts("i2c write failed\n"); - return 0; - } - - for (j = 0x80; j < 0x100; ) { - printf("\n%2x", j); - for (i = 0; i < 16; i++) { - i2c_read(PFUZE100_I2C_ADDR, j+i, 1, &val, 1); - printf("\t%2x", val); - } - j += 0x10; - } - printf("\nEXT Page 2"); + printf("device id: 0x%.2x, revision id: 0x%.2x, ", devid, revid); - val = PFUZE100_PAGE_REGISTER_PAGE2; - if (i2c_write(PFUZE100_I2C_ADDR, PFUZE100_PAGE_REGISTER, 1, - &val, 1)) { - puts("i2c write failed\n"); - return 0; - } - - for (j = 0x80; j < 0x100; ) { - printf("\n%2x", j); - for (i = 0; i < 16; i++) { - i2c_read(PFUZE100_I2C_ADDR, j+i, 1, &val, 1); - printf("\t%2x", val); - } - j += 0x10; - } - printf("\n"); - } -#endif /* get device programmed state */ val = PFUZE100_PAGE_REGISTER_PAGE1; - if (i2c_write(PFUZE100_I2C_ADDR, PFUZE100_PAGE_REGISTER, 1, &val, 1)) { + if (dm_i2c_write(dev, PFUZE100_PAGE_REGISTER, &val, 1)) { puts("i2c write failed\n"); return 0; } - if (i2c_read(PFUZE100_I2C_ADDR, PFUZE100_FUSE_POR1, 1, &val, 1) < 0) { + if (dm_i2c_read(dev, PFUZE100_FUSE_POR1, &val, 1) < 0) { puts("i2c fuse_por read failed\n"); return 0; } if (val & PFUZE100_FUSE_POR_M) programmed++; - if (i2c_read(PFUZE100_I2C_ADDR, PFUZE100_FUSE_POR2, 1, &val, 1) < 0) { + if (dm_i2c_read(dev, PFUZE100_FUSE_POR2, &val, 1) < 0) { puts("i2c fuse_por read failed\n"); return programmed; } if (val & PFUZE100_FUSE_POR_M) programmed++; - if (i2c_read(PFUZE100_I2C_ADDR, PFUZE100_FUSE_POR3, 1, &val, 1) < 0) { + if (dm_i2c_read(dev, PFUZE100_FUSE_POR3, &val, 1) < 0) { puts("i2c fuse_por read failed\n"); return programmed; } @@ -131,13 +133,13 @@ unsigned pmic_init(void) switch (programmed) { case 0: - printf("PMIC: not programmed\n"); + puts("not programmed\n"); break; case 3: - printf("PMIC: programmed\n"); + puts("programmed\n"); break; default: - printf("PMIC: undefined programming state\n"); + puts("undefined programming state\n"); break; } @@ -145,25 +147,75 @@ unsigned pmic_init(void) if (programmed != 3) { /* set VGEN1 to 1.2V */ val = PFUZE100_VGEN1_VAL; - if (i2c_write(PFUZE100_I2C_ADDR, PFUZE100_VGEN1CTL, 1, - &val, 1)) { + if (dm_i2c_write(dev, PFUZE100_VGEN1CTL, &val, 1)) { puts("i2c write failed\n"); return programmed; } /* set SWBST to 5.0V */ val = PFUZE100_SWBST_VAL; - if (i2c_write(PFUZE100_I2C_ADDR, PFUZE100_SWBSTCTL, 1, - &val, 1)) { + if (dm_i2c_write(dev, PFUZE100_SWBSTCTL, &val, 1)) puts("i2c write failed\n"); + } + +#ifdef DEBUG + { + unsigned int i, j; + + for (i = 0; i < 16; i++) + printf("\t%x", i); + for (j = 0; j < 0x80; ) { + printf("\n%2x", j); + for (i = 0; i < 16; i++) { + dm_i2c_read(dev, j + i, &val, 1); + printf("\t%2x", val); + } + j += 0x10; } + printf("\nEXT Page 1"); + + val = PFUZE100_PAGE_REGISTER_PAGE1; + if (dm_i2c_write(dev, PFUZE100_PAGE_REGISTER, &val, 1)) { + puts("i2c write failed\n"); + return 0; + } + + for (j = 0x80; j < 0x100; ) { + printf("\n%2x", j); + for (i = 0; i < 16; i++) { + dm_i2c_read(dev, j + i, &val, 1); + printf("\t%2x", val); + } + j += 0x10; + } + printf("\nEXT Page 2"); + + val = PFUZE100_PAGE_REGISTER_PAGE2; + if (dm_i2c_write(dev, PFUZE100_PAGE_REGISTER, &val, 1)) { + puts("i2c write failed\n"); + return 0; + } + + for (j = 0x80; j < 0x100; ) { + printf("\n%2x", j); + for (i = 0; i < 16; i++) { + dm_i2c_read(dev, j + i, &val, 1); + printf("\t%2x", val); + } + j += 0x10; + } + printf("\n"); } +#endif /* DEBUG */ + return programmed; } #ifndef CONFIG_SPL_BUILD static int pf0100_prog(void) { + int rc; + struct udevice *dev = NULL; unsigned char bus = 1; unsigned char val; unsigned int i; @@ -177,9 +229,10 @@ static int pf0100_prog(void) ARRAY_SIZE(pmic_prog_pads)); gpio_direction_output(PMIC_PROG_VOLTAGE, 0); - if (!((0 == i2c_set_bus_num(bus)) && - (0 == i2c_probe(PFUZE100_I2C_ADDR)))) { - puts("i2c bus failed\n"); + rc = i2c_get_chip_for_busnum(bus, PFUZE100_I2C_ADDR, 1, &dev); + if (rc) { + printf("failed to get device for PMIC at address 0x%x\n", + PFUZE100_I2C_ADDR); return CMD_RET_FAILURE; } @@ -187,8 +240,7 @@ static int pf0100_prog(void) switch (pmic_otp_prog[i].cmd) { case pmic_i2c: val = (unsigned char) (pmic_otp_prog[i].value & 0xff); - if (i2c_write(PFUZE100_I2C_ADDR, pmic_otp_prog[i].reg, - 1, &val, 1)) { + if (dm_i2c_write(dev, pmic_otp_prog[i].reg, &val, 1)) { printf("i2c write failed, reg 0x%2x, value 0x%2x\n", pmic_otp_prog[i].reg, val); return CMD_RET_FAILURE; @@ -227,4 +279,4 @@ U_BOOT_CMD( "Program the OTP fuses on the PMIC PF0100", "" ); -#endif +#endif /* CONFIG_SPL_BUILD */ diff --git a/board/toradex/apalis_imx6/pf0100.h b/board/toradex/apalis_imx6/pf0100.h index c0efb79bbc..9257620511 100644 --- a/board/toradex/apalis_imx6/pf0100.h +++ b/board/toradex/apalis_imx6/pf0100.h @@ -1,6 +1,6 @@ /* SPDX-License-Identifier: GPL-2.0+ */ /* - * Copyright (C) 2014-2016, Toradex AG + * Copyright (C) 2014-2019, Toradex AG */ /* @@ -10,11 +10,23 @@ #ifndef PF0100_H_ #define PF0100_H_ +/* bit definitions */ +#define PFUZE100_BIT_0 (0x01 << 0) +#define PFUZE100_BIT_1 (0x01 << 1) +#define PFUZE100_BIT_2 (0x01 << 2) +#define PFUZE100_BIT_3 (0x01 << 3) +#define PFUZE100_BIT_4 (0x01 << 4) +#define PFUZE100_BIT_5 (0x01 << 5) +#define PFUZE100_BIT_6 (0x01 << 6) +#define PFUZE100_BIT_7 (0x01 << 7) + /* 7-bit I2C bus slave address */ #define PFUZE100_I2C_ADDR (0x08) /* Register Addresses */ #define PFUZE100_DEVICEID (0x0) #define PFUZE100_REVID (0x3) +#define PFUZE100_INTSTAT3 (0xe) +#define PFUZE100_BIT_OTP_ECCI PFUZE100_BIT_7 #define PFUZE100_SW1AMODE (0x23) #define PFUZE100_SW1ACON 36 #define PFUZE100_SW1ACON_SPEED_VAL (0x1<<6) /*default */ @@ -39,12 +51,55 @@ #define PFUZE100_PAGE_REGISTER_PAGE2 (0x02 & PFUZE100_PAGE_REGISTER_PAGE_M) /* extended page 1 */ +#define PFUZE100_OTP_ECC_SE1 0x8a +#define PFUZE100_BIT_ECC1_SE PFUZE100_BIT_0 +#define PFUZE100_BIT_ECC2_SE PFUZE100_BIT_1 +#define PFUZE100_BIT_ECC3_SE PFUZE100_BIT_2 +#define PFUZE100_BIT_ECC4_SE PFUZE100_BIT_3 +#define PFUZE100_BIT_ECC5_SE PFUZE100_BIT_4 +#define PFUZE100_BITS_ECC_SE1 ((PFUZE100_BIT_ECC1_SE) | \ + (PFUZE100_BIT_ECC2_SE) | \ + (PFUZE100_BIT_ECC3_SE) | \ + (PFUZE100_BIT_ECC4_SE) | \ + (PFUZE100_BIT_ECC5_SE)) +#define PFUZE100_OTP_ECC_SE2 0x8b +#define PFUZE100_BIT_ECC6_SE PFUZE100_BIT_0 +#define PFUZE100_BIT_ECC7_SE PFUZE100_BIT_1 +#define PFUZE100_BIT_ECC8_SE PFUZE100_BIT_2 +#define PFUZE100_BIT_ECC9_SE PFUZE100_BIT_3 +#define PFUZE100_BIT_ECC10_SE PFUZE100_BIT_4 +#define PFUZE100_BITS_ECC_SE2 ((PFUZE100_BIT_ECC6_SE) | \ + (PFUZE100_BIT_ECC7_SE) | \ + (PFUZE100_BIT_ECC8_SE) | \ + (PFUZE100_BIT_ECC9_SE) | \ + (PFUZE100_BIT_ECC10_SE)) +#define PFUZE100_OTP_ECC_DE1 0x8c +#define PFUZE100_BIT_ECC1_DE PFUZE100_BIT_0 +#define PFUZE100_BIT_ECC2_DE PFUZE100_BIT_1 +#define PFUZE100_BIT_ECC3_DE PFUZE100_BIT_2 +#define PFUZE100_BIT_ECC4_DE PFUZE100_BIT_3 +#define PFUZE100_BIT_ECC5_DE PFUZE100_BIT_4 +#define PFUZE100_BITS_ECC_DE1 ((PFUZE100_BIT_ECC1_DE) | \ + (PFUZE100_BIT_ECC2_DE) | \ + (PFUZE100_BIT_ECC3_DE) | \ + (PFUZE100_BIT_ECC4_DE) | \ + (PFUZE100_BIT_ECC5_DE)) +#define PFUZE100_OTP_ECC_DE2 0x8d +#define PFUZE100_BIT_ECC6_DE PFUZE100_BIT_0 +#define PFUZE100_BIT_ECC7_DE PFUZE100_BIT_1 +#define PFUZE100_BIT_ECC8_DE PFUZE100_BIT_2 +#define PFUZE100_BIT_ECC9_DE PFUZE100_BIT_3 +#define PFUZE100_BIT_ECC10_DE PFUZE100_BIT_4 +#define PFUZE100_BITS_ECC_DE2 ((PFUZE100_BIT_ECC6_DE) | \ + (PFUZE100_BIT_ECC7_DE) | \ + (PFUZE100_BIT_ECC8_DE) | \ + (PFUZE100_BIT_ECC9_DE) | \ + (PFUZE100_BIT_ECC10_DE)) #define PFUZE100_FUSE_POR1 0xe4 #define PFUZE100_FUSE_POR2 0xe5 #define PFUZE100_FUSE_POR3 0xe6 #define PFUZE100_FUSE_POR_M (0x1 << 1) - /* output some informational messages, return the number FUSE_POR=1 */ /* i.e. 0: unprogrammed, 3: programmed, other: undefined prog. state */ unsigned pmic_init(void); |