summaryrefslogtreecommitdiff
path: root/board/toradex
diff options
context:
space:
mode:
Diffstat (limited to 'board/toradex')
-rw-r--r--board/toradex/apalis_imx6/apalis_imx6.c10
1 files changed, 9 insertions, 1 deletions
diff --git a/board/toradex/apalis_imx6/apalis_imx6.c b/board/toradex/apalis_imx6/apalis_imx6.c
index 407ed1e22e..934ba1fb5b 100644
--- a/board/toradex/apalis_imx6/apalis_imx6.c
+++ b/board/toradex/apalis_imx6/apalis_imx6.c
@@ -238,8 +238,11 @@ iomux_v3_cfg_t const usb_pads[] = {
* UARTs are used in DTE mode, switch the mode on all UARTs before
* any pinmuxing connects a (DCE) output to a transceiver output.
*/
+#define UCR3 0x88 /* FIFO Control Register */
+#define UCR3_RI BIT(8) /* RIDELT DTE mode */
+#define UCR3_DCD BIT(9) /* DCDDELT DTE mode */
#define UFCR 0x90 /* FIFO Control Register */
-#define UFCR_DCEDTE (1<<6) /* DCE=0 */
+#define UFCR_DCEDTE BIT(6) /* DCE=0 */
static void setup_dtemode_uart(void)
{
@@ -247,6 +250,11 @@ static void setup_dtemode_uart(void)
setbits_le32((u32 *)(UART2_BASE + UFCR), UFCR_DCEDTE);
setbits_le32((u32 *)(UART4_BASE + UFCR), UFCR_DCEDTE);
setbits_le32((u32 *)(UART5_BASE + UFCR), UFCR_DCEDTE);
+
+ clrbits_le32((u32 *)(UART1_BASE + UCR3), UCR3_DCD | UCR3_RI);
+ clrbits_le32((u32 *)(UART2_BASE + UCR3), UCR3_DCD | UCR3_RI);
+ clrbits_le32((u32 *)(UART4_BASE + UCR3), UCR3_DCD | UCR3_RI);
+ clrbits_le32((u32 *)(UART5_BASE + UCR3), UCR3_DCD | UCR3_RI);
}
static void setup_dcemode_uart(void)
{