diff options
Diffstat (limited to 'board/toradex')
| -rw-r--r-- | board/toradex/colibri-imx6ull/colibri-imx6ull.c | 225 | ||||
| -rw-r--r-- | board/toradex/colibri_vf/MAINTAINERS | 2 | ||||
| -rw-r--r-- | board/toradex/common/tdx-cfg-block.c | 89 | ||||
| -rw-r--r-- | board/toradex/common/tdx-cfg-block.h | 32 |
4 files changed, 117 insertions, 231 deletions
diff --git a/board/toradex/colibri-imx6ull/colibri-imx6ull.c b/board/toradex/colibri-imx6ull/colibri-imx6ull.c index fcb49a0718..21addaf6ed 100644 --- a/board/toradex/colibri-imx6ull/colibri-imx6ull.c +++ b/board/toradex/colibri-imx6ull/colibri-imx6ull.c @@ -1,8 +1,9 @@ // SPDX-License-Identifier: GPL-2.0+ /* - * Copyright (C) 2018 Toradex AG + * Copyright (C) 2018-2019 Toradex AG */ #include <common.h> + #include <asm/arch/clock.h> #include <asm/arch/crm_regs.h> #include <asm/arch/imx-regs.h> @@ -14,47 +15,30 @@ #include <asm/mach-imx/boot_mode.h> #include <asm/mach-imx/iomux-v3.h> #include <asm/io.h> -#include <common.h> #include <dm.h> #include <dm/platform_data/serial_mxc.h> #include <fdt_support.h> -#include <fsl_esdhc.h> #include <imx_thermal.h> #include <jffs2/load_kernel.h> #include <linux/sizes.h> -#include <mmc.h> #include <miiphy.h> #include <mtd_node.h> #include <netdev.h> -#include <usb.h> -#include <usb/ehci-ci.h> + #include "../common/tdx-common.h" +#include "../common/tdx-cfg-block.h" DECLARE_GLOBAL_DATA_PTR; -#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | \ - PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \ - PAD_CTL_SRE_FAST | PAD_CTL_HYS) - -#define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP | \ - PAD_CTL_SPEED_LOW | PAD_CTL_DSE_40ohm | \ - PAD_CTL_SRE_FAST | PAD_CTL_HYS) - -#define ENET_PAD_CTRL (PAD_CTL_PUS_100K_UP | \ - PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS) -#define ENET_PAD_CTRL_MII (PAD_CTL_DSE_40ohm) - -#define ENET_RX_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_DSE_48ohm) - #define LCD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_100K_UP | \ PAD_CTL_DSE_48ohm) +#define MX6_PAD_SNVS_PMIC_STBY_REQ_ADDR 0x2290040 + #define NAND_PAD_CTRL (PAD_CTL_DSE_48ohm | PAD_CTL_SRE_SLOW | PAD_CTL_HYS) #define NAND_PAD_READY0_CTRL (PAD_CTL_DSE_48ohm | PAD_CTL_PUS_22K_UP) -#define USB_CDET_GPIO IMX_GPIO_NR(7, 14) - int dram_init(void) { gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE); @@ -62,56 +46,13 @@ int dram_init(void) return 0; } -static iomux_v3_cfg_t const uart1_pads[] = { - MX6_PAD_UART1_TX_DATA__UART1_DTE_RX | MUX_PAD_CTRL(UART_PAD_CTRL), - MX6_PAD_UART1_RX_DATA__UART1_DTE_TX | MUX_PAD_CTRL(UART_PAD_CTRL), - MX6_PAD_UART1_RTS_B__UART1_DTE_CTS | MUX_PAD_CTRL(UART_PAD_CTRL), - MX6_PAD_UART1_CTS_B__UART1_DTE_RTS | MUX_PAD_CTRL(UART_PAD_CTRL), -}; - -#ifdef CONFIG_FSL_ESDHC -static iomux_v3_cfg_t const usdhc1_pads[] = { - MX6_PAD_SD1_CLK__USDHC1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD1_CMD__USDHC1_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD1_DATA0__USDHC1_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD1_DATA1__USDHC1_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD1_DATA2__USDHC1_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD1_DATA3__USDHC1_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - - MX6_PAD_SNVS_TAMPER0__GPIO5_IO00 | MUX_PAD_CTRL(NO_PAD_CTRL), -}; -#endif - -static iomux_v3_cfg_t const usb_cdet_pads[] = { - MX6_PAD_SNVS_TAMPER2__GPIO5_IO02 | MUX_PAD_CTRL(NO_PAD_CTRL), -}; - #ifdef CONFIG_NAND_MXS -static iomux_v3_cfg_t const gpmi_pads[] = { - MX6_PAD_NAND_DATA00__RAWNAND_DATA00 | MUX_PAD_CTRL(NAND_PAD_CTRL), - MX6_PAD_NAND_DATA01__RAWNAND_DATA01 | MUX_PAD_CTRL(NAND_PAD_CTRL), - MX6_PAD_NAND_DATA02__RAWNAND_DATA02 | MUX_PAD_CTRL(NAND_PAD_CTRL), - MX6_PAD_NAND_DATA03__RAWNAND_DATA03 | MUX_PAD_CTRL(NAND_PAD_CTRL), - MX6_PAD_NAND_DATA04__RAWNAND_DATA04 | MUX_PAD_CTRL(NAND_PAD_CTRL), - MX6_PAD_NAND_DATA05__RAWNAND_DATA05 | MUX_PAD_CTRL(NAND_PAD_CTRL), - MX6_PAD_NAND_DATA06__RAWNAND_DATA06 | MUX_PAD_CTRL(NAND_PAD_CTRL), - MX6_PAD_NAND_DATA07__RAWNAND_DATA07 | MUX_PAD_CTRL(NAND_PAD_CTRL), - MX6_PAD_NAND_CLE__RAWNAND_CLE | MUX_PAD_CTRL(NAND_PAD_CTRL), - MX6_PAD_NAND_ALE__RAWNAND_ALE | MUX_PAD_CTRL(NAND_PAD_CTRL), - MX6_PAD_NAND_RE_B__RAWNAND_RE_B | MUX_PAD_CTRL(NAND_PAD_CTRL), - MX6_PAD_NAND_WE_B__RAWNAND_WE_B | MUX_PAD_CTRL(NAND_PAD_CTRL), - MX6_PAD_NAND_CE0_B__RAWNAND_CE0_B | MUX_PAD_CTRL(NAND_PAD_CTRL), - MX6_PAD_NAND_READY_B__RAWNAND_READY_B | MUX_PAD_CTRL(NAND_PAD_READY0_CTRL), -}; - static void setup_gpmi_nand(void) { - imx_iomux_v3_setup_multiple_pads(gpmi_pads, ARRAY_SIZE(gpmi_pads)); - setup_gpmi_io_clk((3 << MXC_CCM_CSCDR1_BCH_PODF_OFFSET) | (3 << MXC_CCM_CSCDR1_GPMI_PODF_OFFSET)); } -#endif +#endif /* CONFIG_NAND_MXS */ #ifdef CONFIG_VIDEO_MXS static iomux_v3_cfg_t const lcd_pads[] = { @@ -168,100 +109,24 @@ static int setup_lcd(void) #endif #ifdef CONFIG_FEC_MXC -static iomux_v3_cfg_t const fec2_pads[] = { - MX6_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 | MUX_PAD_CTRL(ENET_PAD_CTRL) | MUX_MODE_SION, - MX6_PAD_GPIO1_IO06__ENET2_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL_MII), - MX6_PAD_GPIO1_IO07__ENET2_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL_MII), - MX6_PAD_ENET2_RX_DATA0__ENET2_RDATA00 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), - MX6_PAD_ENET2_RX_DATA1__ENET2_RDATA01 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), - MX6_PAD_ENET2_RX_ER__ENET2_RX_ER | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), - MX6_PAD_ENET2_RX_EN__ENET2_RX_EN | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), - MX6_PAD_ENET2_TX_DATA0__ENET2_TDATA00 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_ENET2_TX_DATA1__ENET2_TDATA01 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_ENET2_TX_EN__ENET2_TX_EN | MUX_PAD_CTRL(ENET_PAD_CTRL), -}; - -static void setup_iomux_fec(void) -{ - imx_iomux_v3_setup_multiple_pads(fec2_pads, ARRAY_SIZE(fec2_pads)); -} -#endif - -static void setup_iomux_uart(void) -{ - imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads)); -} - -#ifdef CONFIG_FSL_ESDHC - -#define USDHC1_CD_GPIO IMX_GPIO_NR(5, 0) - -static struct fsl_esdhc_cfg usdhc_cfg[] = { - {USDHC1_BASE_ADDR, 0, 4}, -}; - -int board_mmc_getcd(struct mmc *mmc) -{ - struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; - int ret = 0; - - switch (cfg->esdhc_base) { - case USDHC1_BASE_ADDR: - ret = !gpio_get_value(USDHC1_CD_GPIO); - break; - } - - return ret; -} - -int board_mmc_init(bd_t *bis) -{ - int i, ret; - - /* USDHC1 is mmc0 */ - for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) { - switch (i) { - case 0: - imx_iomux_v3_setup_multiple_pads(usdhc1_pads, - ARRAY_SIZE(usdhc1_pads)); - gpio_request(USDHC1_CD_GPIO, "usdhc1_cd"); - gpio_direction_input(USDHC1_CD_GPIO); - usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK); - break; - default: - printf("Warning: you configured more USDHC controllers" - "(%d) than supported by the board\n", i + 1); - return -EINVAL; - } - - ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]); - if (ret) - return ret; - } - - return 0; -} -#endif - -#ifdef CONFIG_FEC_MXC - static int setup_fec(void) { struct iomuxc *iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR; int ret; - setup_iomux_fec(); - /* provide the PHY clock from the i.MX 6 */ ret = enable_fec_anatop_clock(1, ENET_50MHZ); if (ret) return ret; - /* Use 50M anatop REF_CLK and output it on the ENET2_TX_CLK */ + /* Use 50M anatop REF_CLK and output it on ENET2_TX_CLK */ clrsetbits_le32(&iomuxc_regs->gpr[1], IOMUX_GPR1_FEC2_CLOCK_MUX2_SEL_MASK, IOMUX_GPR1_FEC2_CLOCK_MUX1_SEL_MASK); + /* give new Ethernet PHY power save mode circuitry time to settle */ + mdelay(300); + return 0; } @@ -271,14 +136,7 @@ int board_phy_config(struct phy_device *phydev) phydev->drv->config(phydev); return 0; } -#endif - -int board_early_init_f(void) -{ - setup_iomux_uart(); - - return 0; -} +#endif /* CONFIG_FEC_MXC */ int board_init(void) { @@ -297,11 +155,6 @@ int board_init(void) setup_lcd(); #endif -#ifdef CONFIG_USB_EHCI_MX6 - imx_iomux_v3_setup_multiple_pads(usb_cdet_pads, ARRAY_SIZE(usb_cdet_pads)); - gpio_request(USB_CDET_GPIO, "usb-cdet-gpio"); -#endif - return 0; } @@ -317,10 +170,23 @@ static const struct boot_mode board_boot_modes[] = { int board_late_init(void) { - int minc, maxc; - - if (get_cpu_temp_grade(&minc, &maxc) != TEMP_COMMERCIAL) +#ifdef CONFIG_TDX_CFG_BLOCK + /* + * If we have a valid config block and it says we are a module with + * Wi-Fi/Bluetooth make sure we use the -wifi device tree. + */ + if (tdx_hw_tag.prodid == COLIBRI_IMX6ULL_WIFI_BT_IT || + tdx_hw_tag.prodid == COLIBRI_IMX6ULL_WIFI_BT) env_set("variant", "-wifi"); +#endif + + /* + * Disable output driver of PAD CCM_PMIC_STBY_REQ. This prevents the + * SOC to request for a lower voltage during sleep. This is necessary + * because the voltage is changing too slow for the SOC to wake up + * properly. + */ + __raw_writel(0x8080, MX6_PAD_SNVS_PMIC_STBY_REQ_ADDR); #ifdef CONFIG_CMD_BMODE add_board_boot_modes(board_boot_modes); @@ -362,41 +228,6 @@ int ft_board_setup(void *blob, bd_t *bd) } #endif -#ifdef CONFIG_USB_EHCI_MX6 -static iomux_v3_cfg_t const usb_otg2_pads[] = { - MX6_PAD_GPIO1_IO02__GPIO1_IO02 | MUX_PAD_CTRL(NO_PAD_CTRL), -}; - -int board_ehci_hcd_init(int port) -{ - switch (port) { - case 0: - break; - case 1: - imx_iomux_v3_setup_multiple_pads(usb_otg2_pads, - ARRAY_SIZE(usb_otg2_pads)); - break; - default: - return -EINVAL; - } - return 0; -} - -int board_usb_phy_mode(int port) -{ - switch (port) { - case 0: - if (gpio_get_value(USB_CDET_GPIO)) - return USB_INIT_DEVICE; - else - return USB_INIT_HOST; - case 1: - default: - return USB_INIT_HOST; - } -} -#endif - static struct mxc_serial_platdata mxc_serial_plat = { .reg = (struct mxc_uart *)UART1_BASE, .use_dte = 1, diff --git a/board/toradex/colibri_vf/MAINTAINERS b/board/toradex/colibri_vf/MAINTAINERS index 3ee2b33152..66b2150986 100644 --- a/board/toradex/colibri_vf/MAINTAINERS +++ b/board/toradex/colibri_vf/MAINTAINERS @@ -1,7 +1,7 @@ Colibri VFxx M: Stefan Agner <stefan.agner@toradex.com> W: http://developer.toradex.com/software/linux/linux-software -W: https://www.toradex.com/community +W: https://www.toradex.com/community S: Maintained F: board/toradex/colibri_vf/ F: include/configs/colibri_vf.h diff --git a/board/toradex/common/tdx-cfg-block.c b/board/toradex/common/tdx-cfg-block.c index b90077bedc..f69c4433b2 100644 --- a/board/toradex/common/tdx-cfg-block.c +++ b/board/toradex/common/tdx-cfg-block.c @@ -1,12 +1,14 @@ // SPDX-License-Identifier: GPL-2.0+ /* - * Copyright (c) 2016 Toradex, Inc. + * Copyright (c) 2016-2019 Toradex, Inc. */ #include <common.h> #include "tdx-cfg-block.h" -#if defined(CONFIG_TARGET_APALIS_IMX6) || defined(CONFIG_TARGET_COLIBRI_IMX6) +#if defined(CONFIG_TARGET_APALIS_IMX6) || \ + defined(CONFIG_TARGET_COLIBRI_IMX6) || \ + defined(CONFIG_TARGET_COLIBRI_IMX8QXP) #include <asm/arch/sys_proto.h> #else #define is_cpu_type(cpu) (0) @@ -92,12 +94,22 @@ const char * const toradex_modules[] = { [34] = "Apalis TK1 2GB", [35] = "Apalis iMX6 Dual 1GB IT", [36] = "Colibri iMX6ULL 256MB", - [37] = "Apalis iMX8 QuadMax 4GB Wi-Fi / Bluetooth", - [38] = "Colibri iMX8X", + [37] = "Apalis iMX8 QuadMax 4GB Wi-Fi / BT IT", + [38] = "Colibri iMX8 QuadXPlus 2GB Wi-Fi / BT IT", [39] = "Colibri iMX7 Dual 1GB (eMMC)", - [40] = "Colibri iMX6ULL 512MB Wi-Fi / Bluetooth IT", + [40] = "Colibri iMX6ULL 512MB Wi-Fi / BT IT", [41] = "Colibri iMX7 Dual 512MB EPDC", [42] = "Apalis TK1 4GB", + [43] = "Colibri T20 512MB IT SETEK", + [44] = "Colibri iMX6ULL 512MB IT", + [45] = "Colibri iMX6ULL 512MB Wi-Fi / Bluetooth", + [46] = "Apalis iMX8 QuadXPlus 2GB Wi-Fi / BT IT", + [47] = "Apalis iMX8 QuadMax 4GB IT", + [48] = "Apalis iMX8 QuadPlus 2GB Wi-Fi / BT", + [49] = "Apalis iMX8 QuadPlus 2GB", + [50] = "Colibri iMX8 QuadXPlus 2GB IT", + [51] = "Colibri iMX8 DualX 1GB Wi-Fi / Bluetooth", + [52] = "Colibri iMX8 DualX 1GB", }; #ifdef CONFIG_TDX_CFG_BLOCK_IS_IN_MMC @@ -277,6 +289,9 @@ static int get_cfgblock_interactive(void) char it = 'n'; int len; + /* Unknown module by default */ + tdx_hw_tag.prodid = 0; + if (cpu_is_pxa27x()) sprintf(message, "Is the module the 312 MHz version? [y/N] "); else @@ -287,34 +302,56 @@ static int get_cfgblock_interactive(void) soc = env_get("soc"); if (!strcmp("mx6", soc)) { -#ifdef CONFIG_MACH_TYPE - if (it == 'y' || it == 'Y') +#ifdef CONFIG_TARGET_APALIS_IMX6 + if (it == 'y' || it == 'Y') { if (is_cpu_type(MXC_CPU_MX6Q)) tdx_hw_tag.prodid = APALIS_IMX6Q_IT; else tdx_hw_tag.prodid = APALIS_IMX6D_IT; - else + } else { if (is_cpu_type(MXC_CPU_MX6Q)) tdx_hw_tag.prodid = APALIS_IMX6Q; else tdx_hw_tag.prodid = APALIS_IMX6D; -#else - if (it == 'y' || it == 'Y') + } +#elif CONFIG_TARGET_COLIBRI_IMX6 + if (it == 'y' || it == 'Y') { if (is_cpu_type(MXC_CPU_MX6DL)) tdx_hw_tag.prodid = COLIBRI_IMX6DL_IT; - else + else if (is_cpu_type(MXC_CPU_MX6SOLO)) tdx_hw_tag.prodid = COLIBRI_IMX6S_IT; - else + } else { if (is_cpu_type(MXC_CPU_MX6DL)) tdx_hw_tag.prodid = COLIBRI_IMX6DL; - else + else if (is_cpu_type(MXC_CPU_MX6SOLO)) tdx_hw_tag.prodid = COLIBRI_IMX6S; -#endif /* CONFIG_MACH_TYPE */ - } else if (!strcmp("imx7d", soc)) { + } +#elif CONFIG_TARGET_COLIBRI_IMX6ULL + char wb = 'n'; + + sprintf(message, "Does the module have Wi-Fi / Bluetooth? " \ + "[y/N] "); + len = cli_readline(message); + wb = console_buffer[0]; + if (it == 'y' || it == 'Y') { + if (wb == 'y' || wb == 'Y') + tdx_hw_tag.prodid = COLIBRI_IMX6ULL_WIFI_BT_IT; + else + tdx_hw_tag.prodid = COLIBRI_IMX6ULL_IT; + } else { + if (wb == 'y' || wb == 'Y') + tdx_hw_tag.prodid = COLIBRI_IMX6ULL_WIFI_BT; + else + tdx_hw_tag.prodid = COLIBRI_IMX6ULL; + } +#endif + } else if (!strcmp("imx7d", soc)) tdx_hw_tag.prodid = COLIBRI_IMX7D; - } else if (!strcmp("imx7s", soc)) { + else if (!strcmp("imx7s", soc)) tdx_hw_tag.prodid = COLIBRI_IMX7S; - } else if (!strcmp("tegra20", soc)) { + else if (is_cpu_type(MXC_CPU_IMX8QXP)) + tdx_hw_tag.prodid = COLIBRI_IMX8QXP_WIFI_BT_IT; + else if (!strcmp("tegra20", soc)) { if (it == 'y' || it == 'Y') if (gd->ram_size == 0x10000000) tdx_hw_tag.prodid = COLIBRI_T20_256MB_IT; @@ -330,8 +367,9 @@ static int get_cfgblock_interactive(void) tdx_hw_tag.prodid = COLIBRI_PXA270_312MHZ; else tdx_hw_tag.prodid = COLIBRI_PXA270_520MHZ; + } #ifdef CONFIG_MACH_TYPE - } else if (!strcmp("tegra30", soc)) { + else if (!strcmp("tegra30", soc)) { if (CONFIG_MACH_TYPE == MACH_TYPE_APALIS_T30) { if (it == 'y' || it == 'Y') tdx_hw_tag.prodid = APALIS_T30_IT; @@ -346,8 +384,9 @@ static int get_cfgblock_interactive(void) else tdx_hw_tag.prodid = COLIBRI_T30; } + } #endif /* CONFIG_MACH_TYPE */ - } else if (!strcmp("tegra124", soc)) { + else if (!strcmp("tegra124", soc)) { tdx_hw_tag.prodid = APALIS_TK1_2GB; } else if (!strcmp("vf500", soc)) { if (it == 'y' || it == 'Y') @@ -359,7 +398,9 @@ static int get_cfgblock_interactive(void) tdx_hw_tag.prodid = COLIBRI_VF61_IT; else tdx_hw_tag.prodid = COLIBRI_VF61; - } else { + } + + if (!tdx_hw_tag.prodid) { printf("Module type not detectable due to unknown SoC\n"); return -1; } @@ -373,7 +414,7 @@ static int get_cfgblock_interactive(void) tdx_hw_tag.ver_minor = console_buffer[2] - '0'; tdx_hw_tag.ver_assembly = console_buffer[3] - 'A'; - if (cpu_is_pxa27x() && (tdx_hw_tag.ver_major == 1)) + if (cpu_is_pxa27x() && tdx_hw_tag.ver_major == 1) tdx_hw_tag.prodid -= (COLIBRI_PXA270_312MHZ - COLIBRI_PXA270_V1_312MHZ); @@ -441,7 +482,8 @@ static int do_cfgblock_create(cmd_tbl_t *cmdtp, int flag, int argc, * On NAND devices, recreation is only allowed if the page is * empty (config block invalid...) */ - printf("NAND erase block %d need to be erased before creating a Toradex config block\n", + printf("NAND erase block %d need to be erased before creating" \ + " a Toradex config block\n", CONFIG_TDX_CFG_BLOCK_OFFSET / get_nand_dev_by_index(0)->erasesize); goto out; @@ -450,7 +492,8 @@ static int do_cfgblock_create(cmd_tbl_t *cmdtp, int flag, int argc, * On NOR devices, recreation is only allowed if the sector is * empty and write protection is off (config block invalid...) */ - printf("NOR sector at offset 0x%02x need to be erased and unprotected before creating a Toradex config block\n", + printf("NOR sector at offset 0x%02x need to be erased and " \ + "unprotected before creating a Toradex config block\n", CONFIG_TDX_CFG_BLOCK_OFFSET); goto out; #else diff --git a/board/toradex/common/tdx-cfg-block.h b/board/toradex/common/tdx-cfg-block.h index da60e789a7..bfdc8b7f70 100644 --- a/board/toradex/common/tdx-cfg-block.h +++ b/board/toradex/common/tdx-cfg-block.h @@ -25,42 +25,54 @@ enum { COLIBRI_PXA270_V1_520MHZ, COLIBRI_PXA320, COLIBRI_PXA300, - COLIBRI_PXA310, + COLIBRI_PXA310, /* 5 */ COLIBRI_PXA320_IT, COLIBRI_PXA300_XT, COLIBRI_PXA270_312MHZ, COLIBRI_PXA270_520MHZ, - COLIBRI_VF50, /* not currently on sale */ - COLIBRI_VF61, + COLIBRI_VF50, /* 10 */ + COLIBRI_VF61, /* not currently on sale */ COLIBRI_VF61_IT, COLIBRI_VF50_IT, COLIBRI_IMX6S, - COLIBRI_IMX6DL, + COLIBRI_IMX6DL, /* 15 */ COLIBRI_IMX6S_IT, COLIBRI_IMX6DL_IT, + /* 18 */ + /* 19 */ COLIBRI_T20_256MB = 20, COLIBRI_T20_512MB, COLIBRI_T20_512MB_IT, COLIBRI_T30, COLIBRI_T20_256MB_IT, - APALIS_T30_2GB, + APALIS_T30_2GB, /* 25 */ APALIS_T30_1GB, APALIS_IMX6Q, APALIS_IMX6Q_IT, APALIS_IMX6D, - COLIBRI_T30_IT, + COLIBRI_T30_IT, /* 30 */ APALIS_T30_IT, COLIBRI_IMX7S, COLIBRI_IMX7D, APALIS_TK1_2GB, - APALIS_IMX6D_IT, + APALIS_IMX6D_IT, /* 35 */ COLIBRI_IMX6ULL, - APALIS_IMX8QM, /* 37 */ - COLIBRI_IMX8X, + APALIS_IMX8QM_WIFI_BT_IT, + COLIBRI_IMX8QXP_WIFI_BT_IT, COLIBRI_IMX7D_EMMC, COLIBRI_IMX6ULL_WIFI_BT_IT, /* 40 */ COLIBRI_IMX7D_EPDC, - APALIS_TK1_4GB, + APALIS_TK1_4GB, /* not currently on sale */ + COLIBRI_T20_512MB_IT_SETEK, + COLIBRI_IMX6ULL_IT, + COLIBRI_IMX6ULL_WIFI_BT, /* 45 */ + APALIS_IMX8QXP_WIFI_BT_IT, + APALIS_IMX8QM_IT, + APALIS_IMX8QP_WIFI_BT, + APALIS_IMX8QP, + COLIBRI_IMX8QXP_IT, /* 50 */ + COLIBRI_IMX8DX_WIFI_BT, + COLIBRI_IMX8DX, }; extern const char * const toradex_modules[]; |