summaryrefslogtreecommitdiff
path: root/board/tqc
diff options
context:
space:
mode:
Diffstat (limited to 'board/tqc')
-rw-r--r--board/tqc/tqm8xx/Kconfig155
-rw-r--r--board/tqc/tqm8xx/MAINTAINERS31
-rw-r--r--board/tqc/tqm8xx/Makefile8
-rw-r--r--board/tqc/tqm8xx/load_sernum_ethaddr.c89
-rw-r--r--board/tqc/tqm8xx/tqm8xx.c677
-rw-r--r--board/tqc/tqm8xx/u-boot.lds94
6 files changed, 0 insertions, 1054 deletions
diff --git a/board/tqc/tqm8xx/Kconfig b/board/tqc/tqm8xx/Kconfig
deleted file mode 100644
index 857fedb8be..0000000000
--- a/board/tqc/tqm8xx/Kconfig
+++ /dev/null
@@ -1,155 +0,0 @@
-if TARGET_TQM823L
-
-config SYS_BOARD
- default "tqm8xx"
-
-config SYS_VENDOR
- default "tqc"
-
-config SYS_CONFIG_NAME
- default "TQM823L"
-
-endif
-
-if TARGET_TQM823M
-
-config SYS_BOARD
- default "tqm8xx"
-
-config SYS_VENDOR
- default "tqc"
-
-config SYS_CONFIG_NAME
- default "TQM823M"
-
-endif
-
-if TARGET_TQM850L
-
-config SYS_BOARD
- default "tqm8xx"
-
-config SYS_VENDOR
- default "tqc"
-
-config SYS_CONFIG_NAME
- default "TQM850L"
-
-endif
-
-if TARGET_TQM850M
-
-config SYS_BOARD
- default "tqm8xx"
-
-config SYS_VENDOR
- default "tqc"
-
-config SYS_CONFIG_NAME
- default "TQM850M"
-
-endif
-
-if TARGET_TQM855L
-
-config SYS_BOARD
- default "tqm8xx"
-
-config SYS_VENDOR
- default "tqc"
-
-config SYS_CONFIG_NAME
- default "TQM855L"
-
-endif
-
-if TARGET_TQM855M
-
-config SYS_BOARD
- default "tqm8xx"
-
-config SYS_VENDOR
- default "tqc"
-
-config SYS_CONFIG_NAME
- default "TQM855M"
-
-endif
-
-if TARGET_TQM860L
-
-config SYS_BOARD
- default "tqm8xx"
-
-config SYS_VENDOR
- default "tqc"
-
-config SYS_CONFIG_NAME
- default "TQM860L"
-
-endif
-
-if TARGET_TQM860M
-
-config SYS_BOARD
- default "tqm8xx"
-
-config SYS_VENDOR
- default "tqc"
-
-config SYS_CONFIG_NAME
- default "TQM860M"
-
-endif
-
-if TARGET_TQM862L
-
-config SYS_BOARD
- default "tqm8xx"
-
-config SYS_VENDOR
- default "tqc"
-
-config SYS_CONFIG_NAME
- default "TQM862L"
-
-endif
-
-if TARGET_TQM862M
-
-config SYS_BOARD
- default "tqm8xx"
-
-config SYS_VENDOR
- default "tqc"
-
-config SYS_CONFIG_NAME
- default "TQM862M"
-
-endif
-
-if TARGET_TQM866M
-
-config SYS_BOARD
- default "tqm8xx"
-
-config SYS_VENDOR
- default "tqc"
-
-config SYS_CONFIG_NAME
- default "TQM866M"
-
-endif
-
-if TARGET_TQM885D
-
-config SYS_BOARD
- default "tqm8xx"
-
-config SYS_VENDOR
- default "tqc"
-
-config SYS_CONFIG_NAME
- default "TQM885D"
-
-endif
diff --git a/board/tqc/tqm8xx/MAINTAINERS b/board/tqc/tqm8xx/MAINTAINERS
deleted file mode 100644
index f3ddc6a530..0000000000
--- a/board/tqc/tqm8xx/MAINTAINERS
+++ /dev/null
@@ -1,31 +0,0 @@
-TQM8XX BOARD
-M: Wolfgang Denk <wd@denx.de>
-S: Maintained
-F: board/tqc/tqm8xx/
-F: include/configs/TQM823L.h
-F: configs/TQM823L_defconfig
-F: configs/TQM823L_LCD_defconfig
-F: include/configs/TQM823M.h
-F: configs/TQM823M_defconfig
-F: include/configs/TQM850L.h
-F: configs/TQM850L_defconfig
-F: include/configs/TQM850M.h
-F: configs/TQM850M_defconfig
-F: include/configs/TQM855L.h
-F: configs/TQM855L_defconfig
-F: include/configs/TQM855M.h
-F: configs/TQM855M_defconfig
-F: include/configs/TQM860L.h
-F: configs/TQM860L_defconfig
-F: include/configs/TQM860M.h
-F: configs/TQM860M_defconfig
-F: include/configs/TQM862L.h
-F: configs/TQM862L_defconfig
-F: include/configs/TQM862M.h
-F: configs/TQM862M_defconfig
-F: include/configs/TQM866M.h
-F: configs/TQM866M_defconfig
-F: include/configs/TQM885D.h
-F: configs/TQM885D_defconfig
-F: configs/TTTech_defconfig
-F: configs/wtk_defconfig
diff --git a/board/tqc/tqm8xx/Makefile b/board/tqc/tqm8xx/Makefile
deleted file mode 100644
index 2651a2f99f..0000000000
--- a/board/tqc/tqm8xx/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y = tqm8xx.o load_sernum_ethaddr.o
diff --git a/board/tqc/tqm8xx/load_sernum_ethaddr.c b/board/tqc/tqm8xx/load_sernum_ethaddr.c
deleted file mode 100644
index 0070da1fb8..0000000000
--- a/board/tqc/tqm8xx/load_sernum_ethaddr.c
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * (C) Copyright 2000, 2001, 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-
-/*-----------------------------------------------------------------------
- * Process Hardware Information Block:
- *
- * If we boot on a system fresh from factory, check if the Hardware
- * Information Block exists and save the information it contains.
- *
- * The TQM8xxL / TQM82xx Hardware Information Block is defined as
- * follows:
- * - located in first flash bank
- * - starts at offset 0x0003FFC0
- * - size 0x00000040
- *
- * Internal structure:
- * - sequence of ASCII character strings
- * - fields separated by a single space character (0x20)
- * - last field terminated by NUL character (0x00)
- * - remaining space filled with NUL characters (0x00)
- *
- * Fields in Hardware Information Block:
- * 1) Module Type
- * 2) Serial Number
- * 3) First MAC Address
- * 4) Number of additional MAC addresses
- */
-
-void load_sernum_ethaddr (void)
-{
- unsigned char *hwi;
- unsigned char serial [CONFIG_SYS_HWINFO_SIZE];
- unsigned char ethaddr[CONFIG_SYS_HWINFO_SIZE];
- unsigned short ih, is, ie, part;
-
- hwi = (unsigned char *)(CONFIG_SYS_FLASH_BASE + CONFIG_SYS_HWINFO_OFFSET);
- ih = is = ie = 0;
-
- if (*((unsigned long *)hwi) != (unsigned long)CONFIG_SYS_HWINFO_MAGIC) {
- return;
- }
-
- part = 1;
-
- /* copy serial # / MAC address */
- while ((hwi[ih] != '\0') && (ih < CONFIG_SYS_HWINFO_SIZE)) {
- if (hwi[ih] < ' ' || hwi[ih] > '~') { /* ASCII strings! */
- return;
- }
- switch (part) {
- default: /* Copy serial # */
- if (hwi[ih] == ' ') {
- ++part;
- }
- serial[is++] = hwi[ih];
- break;
- case 3: /* Copy MAC address */
- if (hwi[ih] == ' ') {
- ++part;
- break;
- }
- ethaddr[ie++] = hwi[ih];
- if ((ie % 3) == 2)
- ethaddr[ie++] = ':';
- break;
- }
- ++ih;
- }
- serial[is] = '\0';
- if (ie && ethaddr[ie-1] == ':')
- --ie;
- ethaddr[ie] = '\0';
-
- /* set serial# and ethaddr if not yet defined */
- if (getenv("serial#") == NULL) {
- setenv ((char *)"serial#", (char *)serial);
- }
-
- if (getenv("ethaddr") == NULL) {
- setenv ((char *)"ethaddr", (char *)ethaddr);
- }
-}
diff --git a/board/tqc/tqm8xx/tqm8xx.c b/board/tqc/tqm8xx/tqm8xx.c
deleted file mode 100644
index 58bd7fae47..0000000000
--- a/board/tqc/tqm8xx/tqm8xx.c
+++ /dev/null
@@ -1,677 +0,0 @@
-/*
- * (C) Copyright 2000-2008
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <hwconfig.h>
-#include <mpc8xx.h>
-#ifdef CONFIG_PS2MULT
-#include <ps2mult.h>
-#endif
-
-#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT)
-#include <libfdt.h>
-#endif
-
-extern flash_info_t flash_info[]; /* FLASH chips info */
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static long int dram_size (long int, long int *, long int);
-
-#define _NOT_USED_ 0xFFFFFFFF
-
-/* UPM initialization table for SDRAM: 40, 50, 66 MHz CLKOUT @ CAS latency 2, tWR=2 */
-const uint sdram_table[] =
-{
- /*
- * Single Read. (Offset 0 in UPMA RAM)
- */
- 0x1F0DFC04, 0xEEAFBC04, 0x11AF7C04, 0xEFBAFC00,
- 0x1FF5FC47, /* last */
- /*
- * SDRAM Initialization (offset 5 in UPMA RAM)
- *
- * This is no UPM entry point. The following definition uses
- * the remaining space to establish an initialization
- * sequence, which is executed by a RUN command.
- *
- */
- 0x1FF5FC34, 0xEFEABC34, 0x1FB57C35, /* last */
- /*
- * Burst Read. (Offset 8 in UPMA RAM)
- */
- 0x1F0DFC04, 0xEEAFBC04, 0x10AF7C04, 0xF0AFFC00,
- 0xF0AFFC00, 0xF1AFFC00, 0xEFBAFC00, 0x1FF5FC47, /* last */
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- /*
- * Single Write. (Offset 18 in UPMA RAM)
- */
- 0x1F0DFC04, 0xEEABBC00, 0x11B77C04, 0xEFFAFC44,
- 0x1FF5FC47, /* last */
- _NOT_USED_, _NOT_USED_, _NOT_USED_,
- /*
- * Burst Write. (Offset 20 in UPMA RAM)
- */
- 0x1F0DFC04, 0xEEABBC00, 0x10A77C00, 0xF0AFFC00,
- 0xF0AFFC00, 0xF0AFFC04, 0xE1BAFC44, 0x1FF5FC47, /* last */
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- /*
- * Refresh (Offset 30 in UPMA RAM)
- */
- 0x1FFD7C84, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04,
- 0xFFFFFC84, 0xFFFFFC07, /* last */
- _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- /*
- * Exception. (Offset 3c in UPMA RAM)
- */
- 0xFFFFFC07, /* last */
- _NOT_USED_, _NOT_USED_, _NOT_USED_,
-};
-
-/* ------------------------------------------------------------------------- */
-
-
-/*
- * Check Board Identity:
- *
- * Test TQ ID string (TQM8xx...)
- * If present, check for "L" type (no second DRAM bank),
- * otherwise "L" type is assumed as default.
- *
- * Set board_type to 'L' for "L" type, 'M' for "M" type, 0 else.
- */
-
-int checkboard (void)
-{
- char buf[64];
- int i;
- int l = getenv_f("serial#", buf, sizeof(buf));
-
- puts ("Board: ");
-
- if (l < 0 || strncmp(buf, "TQM8", 4)) {
- puts ("### No HW ID - assuming TQM8xxL\n");
- return (0);
- }
-
- if ((buf[6] == 'L')) { /* a TQM8xxL type */
- gd->board_type = 'L';
- }
-
- if ((buf[6] == 'M')) { /* a TQM8xxM type */
- gd->board_type = 'M';
- }
-
- if ((buf[6] == 'D')) { /* a TQM885D type */
- gd->board_type = 'D';
- }
-
- for (i = 0; i < l; ++i) {
- if (buf[i] == ' ')
- break;
- putc (buf[i]);
- }
-
- putc ('\n');
-
- return (0);
-}
-
-/* ------------------------------------------------------------------------- */
-
-int dram_init(void)
-{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- volatile memctl8xx_t *memctl = &immap->im_memctl;
- long int size8, size9, size10;
- long int size_b0 = 0;
- long int size_b1 = 0;
- int board_type = gd->board_type;
-
- upmconfig (UPMA, (uint *) sdram_table,
- sizeof (sdram_table) / sizeof (uint));
-
- /*
- * Preliminary prescaler for refresh (depends on number of
- * banks): This value is selected for four cycles every 62.4 us
- * with two SDRAM banks or four cycles every 31.2 us with one
- * bank. It will be adjusted after memory sizing.
- */
- memctl->memc_mptpr = CONFIG_SYS_MPTPR_2BK_8K;
-
- /*
- * The following value is used as an address (i.e. opcode) for
- * the LOAD MODE REGISTER COMMAND during SDRAM initialisation. If
- * the port size is 32bit the SDRAM does NOT "see" the lower two
- * address lines, i.e. mar=0x00000088 -> opcode=0x00000022 for
- * MICRON SDRAMs:
- * -> 0 00 010 0 010
- * | | | | +- Burst Length = 4
- * | | | +----- Burst Type = Sequential
- * | | +------- CAS Latency = 2
- * | +----------- Operating Mode = Standard
- * +-------------- Write Burst Mode = Programmed Burst Length
- */
- memctl->memc_mar = 0x00000088;
-
- /*
- * Map controller banks 2 and 3 to the SDRAM banks 2 and 3 at
- * preliminary addresses - these have to be modified after the
- * SDRAM size has been determined.
- */
- memctl->memc_or2 = CONFIG_SYS_OR2_PRELIM;
- memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM;
-
-#ifndef CONFIG_CAN_DRIVER
- if ((board_type != 'L') &&
- (board_type != 'M') &&
- (board_type != 'D') ) { /* only one SDRAM bank on L, M and D modules */
- memctl->memc_or3 = CONFIG_SYS_OR3_PRELIM;
- memctl->memc_br3 = CONFIG_SYS_BR3_PRELIM;
- }
-#endif /* CONFIG_CAN_DRIVER */
-
- memctl->memc_mamr = CONFIG_SYS_MAMR_8COL & (~(MAMR_PTAE)); /* no refresh yet */
-
- udelay (200);
-
- /* perform SDRAM initializsation sequence */
-
- memctl->memc_mcr = 0x80004105; /* SDRAM bank 0 */
- udelay (1);
- memctl->memc_mcr = 0x80004230; /* SDRAM bank 0 - execute twice */
- udelay (1);
-
-#ifndef CONFIG_CAN_DRIVER
- if ((board_type != 'L') &&
- (board_type != 'M') &&
- (board_type != 'D') ) { /* only one SDRAM bank on L, M and D modules */
- memctl->memc_mcr = 0x80006105; /* SDRAM bank 1 */
- udelay (1);
- memctl->memc_mcr = 0x80006230; /* SDRAM bank 1 - execute twice */
- udelay (1);
- }
-#endif /* CONFIG_CAN_DRIVER */
-
- memctl->memc_mamr |= MAMR_PTAE; /* enable refresh */
-
- udelay (1000);
-
- /*
- * Check Bank 0 Memory Size for re-configuration
- *
- * try 8 column mode
- */
- size8 = dram_size (CONFIG_SYS_MAMR_8COL, SDRAM_BASE2_PRELIM, SDRAM_MAX_SIZE);
- debug ("SDRAM Bank 0 in 8 column mode: %ld MB\n", size8 >> 20);
-
- udelay (1000);
-
- /*
- * try 9 column mode
- */
- size9 = dram_size (CONFIG_SYS_MAMR_9COL, SDRAM_BASE2_PRELIM, SDRAM_MAX_SIZE);
- debug ("SDRAM Bank 0 in 9 column mode: %ld MB\n", size9 >> 20);
-
- udelay(1000);
-
-#if defined(CONFIG_SYS_MAMR_10COL)
- /*
- * try 10 column mode
- */
- size10 = dram_size (CONFIG_SYS_MAMR_10COL, SDRAM_BASE2_PRELIM, SDRAM_MAX_SIZE);
- debug ("SDRAM Bank 0 in 10 column mode: %ld MB\n", size10 >> 20);
-#else
- size10 = 0;
-#endif /* CONFIG_SYS_MAMR_10COL */
-
- if ((size8 < size10) && (size9 < size10)) {
- size_b0 = size10;
- } else if ((size8 < size9) && (size10 < size9)) {
- size_b0 = size9;
- memctl->memc_mamr = CONFIG_SYS_MAMR_9COL;
- udelay (500);
- } else {
- size_b0 = size8;
- memctl->memc_mamr = CONFIG_SYS_MAMR_8COL;
- udelay (500);
- }
- debug ("SDRAM Bank 0: %ld MB\n", size_b0 >> 20);
-
-#ifndef CONFIG_CAN_DRIVER
- if ((board_type != 'L') &&
- (board_type != 'M') &&
- (board_type != 'D') ) { /* only one SDRAM bank on L, M and D modules */
- /*
- * Check Bank 1 Memory Size
- * use current column settings
- * [9 column SDRAM may also be used in 8 column mode,
- * but then only half the real size will be used.]
- */
- size_b1 = dram_size (memctl->memc_mamr, (long int *)SDRAM_BASE3_PRELIM,
- SDRAM_MAX_SIZE);
- debug ("SDRAM Bank 1: %ld MB\n", size_b1 >> 20);
- } else {
- size_b1 = 0;
- }
-#endif /* CONFIG_CAN_DRIVER */
-
- udelay (1000);
-
- /*
- * Adjust refresh rate depending on SDRAM type, both banks
- * For types > 128 MBit leave it at the current (fast) rate
- */
- if ((size_b0 < 0x02000000) && (size_b1 < 0x02000000)) {
- /* reduce to 15.6 us (62.4 us / quad) */
- memctl->memc_mptpr = CONFIG_SYS_MPTPR_2BK_4K;
- udelay (1000);
- }
-
- /*
- * Final mapping: map bigger bank first
- */
- if (size_b1 > size_b0) { /* SDRAM Bank 1 is bigger - map first */
-
- memctl->memc_or3 = ((-size_b1) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM;
- memctl->memc_br3 = (CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
-
- if (size_b0 > 0) {
- /*
- * Position Bank 0 immediately above Bank 1
- */
- memctl->memc_or2 = ((-size_b0) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM;
- memctl->memc_br2 = ((CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V)
- + size_b1;
- } else {
- unsigned long reg;
-
- /*
- * No bank 0
- *
- * invalidate bank
- */
- memctl->memc_br2 = 0;
-
- /* adjust refresh rate depending on SDRAM type, one bank */
- reg = memctl->memc_mptpr;
- reg >>= 1; /* reduce to CONFIG_SYS_MPTPR_1BK_8K / _4K */
- memctl->memc_mptpr = reg;
- }
-
- } else { /* SDRAM Bank 0 is bigger - map first */
-
- memctl->memc_or2 = ((-size_b0) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM;
- memctl->memc_br2 =
- (CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
-
- if (size_b1 > 0) {
- /*
- * Position Bank 1 immediately above Bank 0
- */
- memctl->memc_or3 =
- ((-size_b1) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM;
- memctl->memc_br3 =
- ((CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V)
- + size_b0;
- } else {
- unsigned long reg;
-
-#ifndef CONFIG_CAN_DRIVER
- /*
- * No bank 1
- *
- * invalidate bank
- */
- memctl->memc_br3 = 0;
-#endif /* CONFIG_CAN_DRIVER */
-
- /* adjust refresh rate depending on SDRAM type, one bank */
- reg = memctl->memc_mptpr;
- reg >>= 1; /* reduce to CONFIG_SYS_MPTPR_1BK_8K / _4K */
- memctl->memc_mptpr = reg;
- }
- }
-
- udelay (10000);
-
-#ifdef CONFIG_CAN_DRIVER
- /* UPM initialization for CAN @ CLKOUT <= 66 MHz */
-
- /* Initialize OR3 / BR3 */
- memctl->memc_or3 = CONFIG_SYS_OR3_CAN;
- memctl->memc_br3 = CONFIG_SYS_BR3_CAN;
-
- /* Initialize MBMR */
- memctl->memc_mbmr = MBMR_GPL_B4DIS; /* GPL_B4 ouput line Disable */
-
- /* Initialize UPMB for CAN: single read */
- memctl->memc_mdr = 0xFFFFCC04;
- memctl->memc_mcr = 0x0100 | UPMB;
-
- memctl->memc_mdr = 0x0FFFD004;
- memctl->memc_mcr = 0x0101 | UPMB;
-
- memctl->memc_mdr = 0x0FFFC000;
- memctl->memc_mcr = 0x0102 | UPMB;
-
- memctl->memc_mdr = 0x3FFFC004;
- memctl->memc_mcr = 0x0103 | UPMB;
-
- memctl->memc_mdr = 0xFFFFDC07;
- memctl->memc_mcr = 0x0104 | UPMB;
-
- /* Initialize UPMB for CAN: single write */
- memctl->memc_mdr = 0xFFFCCC04;
- memctl->memc_mcr = 0x0118 | UPMB;
-
- memctl->memc_mdr = 0xCFFCDC04;
- memctl->memc_mcr = 0x0119 | UPMB;
-
- memctl->memc_mdr = 0x3FFCC000;
- memctl->memc_mcr = 0x011A | UPMB;
-
- memctl->memc_mdr = 0xFFFCC004;
- memctl->memc_mcr = 0x011B | UPMB;
-
- memctl->memc_mdr = 0xFFFDC405;
- memctl->memc_mcr = 0x011C | UPMB;
-#endif /* CONFIG_CAN_DRIVER */
-
-#ifdef CONFIG_ISP1362_USB
- /* Initialize OR5 / BR5 */
- memctl->memc_or5 = CONFIG_SYS_OR5_ISP1362;
- memctl->memc_br5 = CONFIG_SYS_BR5_ISP1362;
-#endif /* CONFIG_ISP1362_USB */
- gd->ram_size = size_b0 + size_b1;
-
- return 0;
-}
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Check memory range for valid RAM. A simple memory test determines
- * the actually available RAM size between addresses `base' and
- * `base + maxsize'. Some (not all) hardware errors are detected:
- * - short between address lines
- * - short between data lines
- */
-
-static long int dram_size (long int mamr_value, long int *base, long int maxsize)
-{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- volatile memctl8xx_t *memctl = &immap->im_memctl;
-
- memctl->memc_mamr = mamr_value;
-
- return (get_ram_size(base, maxsize));
-}
-
-/* ------------------------------------------------------------------------- */
-
-#ifdef CONFIG_MISC_INIT_R
-extern void load_sernum_ethaddr(void);
-int misc_init_r (void)
-{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- volatile memctl8xx_t *memctl = &immap->im_memctl;
-
- load_sernum_ethaddr();
-
-#ifdef CONFIG_SYS_OR_TIMING_FLASH_AT_50MHZ
- int scy, trlx, flash_or_timing, clk_diff;
-
- scy = (CONFIG_SYS_OR_TIMING_FLASH_AT_50MHZ & OR_SCY_MSK) >> 4;
- if (CONFIG_SYS_OR_TIMING_FLASH_AT_50MHZ & OR_TRLX) {
- trlx = OR_TRLX;
- scy *= 2;
- } else {
- trlx = 0;
- }
-
- /*
- * We assume that each 10MHz of bus clock require 1-clk SCY
- * adjustment.
- */
- clk_diff = (gd->bus_clk / 1000000) - 50;
-
- /*
- * We need proper rounding here. This is what the "+5" and "-5"
- * are here for.
- */
- if (clk_diff >= 0)
- scy += (clk_diff + 5) / 10;
- else
- scy += (clk_diff - 5) / 10;
-
- /*
- * For bus frequencies above 50MHz, we want to use relaxed timing
- * (OR_TRLX).
- */
- if (gd->bus_clk >= 50000000)
- trlx = OR_TRLX;
- else
- trlx = 0;
-
- if (trlx)
- scy /= 2;
-
- if (scy > 0xf)
- scy = 0xf;
- if (scy < 1)
- scy = 1;
-
- flash_or_timing = (scy << 4) | trlx |
- (CONFIG_SYS_OR_TIMING_FLASH_AT_50MHZ & ~(OR_TRLX | OR_SCY_MSK));
-
- memctl->memc_or0 =
- flash_or_timing | (-flash_info[0].size & OR_AM_MSK);
-#else
- memctl->memc_or0 =
- CONFIG_SYS_OR_TIMING_FLASH | (-flash_info[0].size & OR_AM_MSK);
-#endif
- memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V;
-
- debug ("## BR0: 0x%08x OR0: 0x%08x\n",
- memctl->memc_br0, memctl->memc_or0);
-
- if (flash_info[1].size) {
-#ifdef CONFIG_SYS_OR_TIMING_FLASH_AT_50MHZ
- memctl->memc_or1 = flash_or_timing |
- (-flash_info[1].size & 0xFFFF8000);
-#else
- memctl->memc_or1 = CONFIG_SYS_OR_TIMING_FLASH |
- (-flash_info[1].size & 0xFFFF8000);
-#endif
- memctl->memc_br1 =
- ((CONFIG_SYS_FLASH_BASE +
- flash_info[0].
- size) & BR_BA_MSK) | BR_MS_GPCM | BR_V;
-
- debug ("## BR1: 0x%08x OR1: 0x%08x\n",
- memctl->memc_br1, memctl->memc_or1);
- } else {
- memctl->memc_br1 = 0; /* invalidate bank */
-
- debug ("## DISABLE BR1: 0x%08x OR1: 0x%08x\n",
- memctl->memc_br1, memctl->memc_or1);
- }
-
-# ifdef CONFIG_IDE_LED
- /* Configure PA15 as output port */
- immap->im_ioport.iop_padir |= 0x0001;
- immap->im_ioport.iop_paodr |= 0x0001;
- immap->im_ioport.iop_papar &= ~0x0001;
- immap->im_ioport.iop_padat &= ~0x0001; /* turn it off */
-# endif
-
- return (0);
-}
-#endif /* CONFIG_MISC_INIT_R */
-
-
-# ifdef CONFIG_IDE_LED
-void ide_led (uchar led, uchar status)
-{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-
- /* We have one led for both pcmcia slots */
- if (status) { /* led on */
- immap->im_ioport.iop_padat |= 0x0001;
- } else {
- immap->im_ioport.iop_padat &= ~0x0001;
- }
-}
-# endif
-
-#ifdef CONFIG_LCD_INFO
-#include <lcd.h>
-#include <version.h>
-#include <timestamp.h>
-
-void lcd_show_board_info(void)
-{
- char temp[32];
-
- lcd_printf ("%s (%s - %s)\n", U_BOOT_VERSION, U_BOOT_DATE, U_BOOT_TIME);
- lcd_printf ("(C) 2008 DENX Software Engineering GmbH\n");
- lcd_printf (" Wolfgang DENK, wd@denx.de\n");
-#ifdef CONFIG_LCD_INFO_BELOW_LOGO
- lcd_printf ("MPC823 CPU at %s MHz\n",
- strmhz(temp, gd->cpu_clk));
- lcd_printf (" %ld MB RAM, %ld MB Flash\n",
- gd->ram_size >> 20,
- gd->bd->bi_flashsize >> 20 );
-#else
- /* leave one blank line */
- lcd_printf ("\nMPC823 CPU at %s MHz, %ld MB RAM, %ld MB Flash\n",
- strmhz(temp, gd->cpu_clk),
- gd->ram_size >> 20,
- gd->bd->bi_flashsize >> 20 );
-#endif /* CONFIG_LCD_INFO_BELOW_LOGO */
-}
-#endif /* CONFIG_LCD_INFO */
-
-/*
- * Device Tree Support
- */
-#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT)
-int fdt_set_node_and_value (void *blob,
- char *nodename,
- char *regname,
- void *var,
- int size)
-{
- int ret = 0;
- int nodeoffset = 0;
-
- nodeoffset = fdt_path_offset (blob, nodename);
- if (nodeoffset >= 0) {
- ret = fdt_setprop (blob, nodeoffset, regname, var,
- size);
- if (ret < 0) {
- printf("ft_blob_update(): "
- "cannot set %s/%s property; err: %s\n",
- nodename, regname, fdt_strerror (ret));
- }
- } else {
- printf("ft_blob_update(): "
- "cannot find %s node err:%s\n",
- nodename, fdt_strerror (nodeoffset));
- }
- return ret;
-}
-
-int fdt_del_node_name (void *blob, char *nodename)
-{
- int ret = 0;
- int nodeoffset = 0;
-
- nodeoffset = fdt_path_offset (blob, nodename);
- if (nodeoffset >= 0) {
- ret = fdt_del_node (blob, nodeoffset);
- if (ret < 0) {
- printf("%s: cannot delete %s; err: %s\n",
- __func__, nodename, fdt_strerror (ret));
- }
- } else {
- printf("%s: cannot find %s node err:%s\n",
- __func__, nodename, fdt_strerror (nodeoffset));
- }
- return ret;
-}
-
-int fdt_del_prop_name (void *blob, char *nodename, char *propname)
-{
- int ret = 0;
- int nodeoffset = 0;
-
- nodeoffset = fdt_path_offset (blob, nodename);
- if (nodeoffset >= 0) {
- ret = fdt_delprop (blob, nodeoffset, propname);
- if (ret < 0) {
- printf("%s: cannot delete %s %s; err: %s\n",
- __func__, nodename, propname,
- fdt_strerror (ret));
- }
- } else {
- printf("%s: cannot find %s node err:%s\n",
- __func__, nodename, fdt_strerror (nodeoffset));
- }
- return ret;
-}
-
-/*
- * update "brg" property in the blob
- */
-void ft_blob_update (void *blob, bd_t *bd)
-{
- uchar enetaddr[6];
- ulong brg_data = 0;
-
- /* BRG */
- brg_data = cpu_to_be32(bd->bi_busfreq);
- fdt_set_node_and_value(blob,
- "/soc/cpm", "brg-frequency",
- &brg_data, sizeof(brg_data));
-
- /* MAC addr */
- if (eth_getenv_enetaddr("ethaddr", enetaddr)) {
- fdt_set_node_and_value(blob,
- "ethernet0", "local-mac-address",
- enetaddr, sizeof(u8) * 6);
- }
-
- if (hwconfig_arg_cmp("fec", "off")) {
- /* no FEC on this plattform, delete DTS nodes */
- fdt_del_node_name (blob, "ethernet1");
- fdt_del_node_name (blob, "mdio1");
- /* also the aliases entries */
- fdt_del_prop_name (blob, "/aliases", "ethernet1");
- fdt_del_prop_name (blob, "/aliases", "mdio1");
- } else {
- /* adjust local-mac-address for FEC ethernet */
- if (eth_getenv_enetaddr("eth1addr", enetaddr)) {
- fdt_set_node_and_value(blob,
- "ethernet1", "local-mac-address",
- enetaddr, sizeof(u8) * 6);
- }
- }
-}
-
-int ft_board_setup(void *blob, bd_t *bd)
-{
- ft_cpu_setup(blob, bd);
- ft_blob_update(blob, bd);
-
- return 0;
-}
-#endif /* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */
diff --git a/board/tqc/tqm8xx/u-boot.lds b/board/tqc/tqm8xx/u-boot.lds
deleted file mode 100644
index 44dfafae29..0000000000
--- a/board/tqc/tqm8xx/u-boot.lds
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- * (C) Copyright 2000-2012
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-OUTPUT_ARCH(powerpc)
-
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .text :
- {
- /* WARNING - the following is hand-optimized to fit within */
- /* the sector layout of our flash chips! XXX FIXME XXX */
-
- arch/powerpc/cpu/mpc8xx/start.o (.text*)
- arch/powerpc/cpu/mpc8xx/traps.o (.text*)
- arch/powerpc/cpu/mpc8xx/built-in.o (.text*)
- arch/powerpc/lib/built-in.o (.text*)
- board/tqc/tqm8xx/built-in.o (.text*)
- disk/built-in.o (.text*)
- drivers/net/built-in.o (.text*)
- drivers/built-in.o (.text.pcmcia_on)
- drivers/built-in.o (.text.pcmcia_hardware_enable)
-
- . = DEFINED(env_offset) ? env_offset : .;
- common/env_embedded.o (.ppcenv*)
-
- *(.text*)
- }
- _etext = .;
- PROVIDE (etext = .);
- .rodata :
- {
- *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
- }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x00FF) & 0xFFFFFF00;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- _GOT2_TABLE_ = .;
- KEEP(*(.got2))
- KEEP(*(.got))
- _FIXUP_TABLE_ = .;
- KEEP(*(.fixup))
- }
- __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1;
- __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
- .data :
- {
- *(.data*)
- *(.sdata*)
- }
- _edata = .;
- PROVIDE (edata = .);
-
- . = .;
-
- . = ALIGN(4);
- .u_boot_list : {
- KEEP(*(SORT(.u_boot_list*)));
- }
-
-
- . = .;
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(256);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(256);
- __init_end = .;
-
- __bss_start = .;
- .bss (NOLOAD) :
- {
- *(.bss*)
- *(.sbss*)
- *(COMMON)
- . = ALIGN(4);
- }
- __bss_end = . ;
- PROVIDE (end = .);
-}
generated by cgit (git 2.34.1) at 2025-01-09 11:55:35 +0000