diff options
Diffstat (limited to 'board/trab/cmd_trab.c')
| -rw-r--r-- | board/trab/cmd_trab.c | 28 |
1 files changed, 14 insertions, 14 deletions
diff --git a/board/trab/cmd_trab.c b/board/trab/cmd_trab.c index ca4415c0b9..dec3c61827 100644 --- a/board/trab/cmd_trab.c +++ b/board/trab/cmd_trab.c @@ -637,28 +637,28 @@ static int adc_read (unsigned int channel) adc_init (); - padc->ADCCON &= ~ADC_STDBM; /* select normal mode */ - padc->ADCCON &= ~(0x7 << 3); /* clear the channel bits */ - padc->ADCCON |= ((channel << 3) | ADC_ENABLE_START); + padc->adccon &= ~ADC_STDBM; /* select normal mode */ + padc->adccon &= ~(0x7 << 3); /* clear the channel bits */ + padc->adccon |= ((channel << 3) | ADC_ENABLE_START); while (j--) { - if ((padc->ADCCON & ADC_ENABLE_START) == 0) + if ((padc->adccon & ADC_ENABLE_START) == 0) break; udelay (1); } if (j == 0) { printf("%s: ADC timeout\n", __FUNCTION__); - padc->ADCCON |= ADC_STDBM; /* select standby mode */ + padc->adccon |= ADC_STDBM; /* select standby mode */ return -1; } - result = padc->ADCDAT & 0x3FF; + result = padc->adcdat & 0x3FF; - padc->ADCCON |= ADC_STDBM; /* select standby mode */ + padc->adccon |= ADC_STDBM; /* select standby mode */ debug ("%s: channel %d, result[DIGIT]=%d\n", __FUNCTION__, - (padc->ADCCON >> 3) & 0x7, result); + (padc->adccon >> 3) & 0x7, result); /* * Wait for ADC to be ready for next conversion. This delay value was @@ -676,8 +676,8 @@ static void adc_init (void) padc = s3c2400_get_base_adc(); - padc->ADCCON &= ~(0xff << 6); /* clear prescaler bits */ - padc->ADCCON |= ((65 << 6) | ADC_PRSCEN); /* set prescaler */ + padc->adccon &= ~(0xff << 6); /* clear prescaler bits */ + padc->adccon |= ((65 << 6) | ADC_PRSCEN); /* set prescaler */ /* * Wait some time to avoid problem with very first call of @@ -699,10 +699,10 @@ static void led_set (unsigned int state) switch (state) { case 0: /* turn LED off */ - gpio->PADAT |= (1 << 12); + gpio->padat |= (1 << 12); break; case 1: /* turn LED on */ - gpio->PADAT &= ~(1 << 12); + gpio->padat &= ~(1 << 12); break; default: break; @@ -729,8 +729,8 @@ static void led_init (void) struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio(); /* configure GPA12 as output and set to High -> LED off */ - gpio->PACON &= ~(1 << 12); - gpio->PADAT |= (1 << 12); + gpio->pacon &= ~(1 << 12); + gpio->padat |= (1 << 12); } |